diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index c1dcf4c..a1bcfee 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -178,6 +178,7 @@
 			    "marvell,pj4b"
 			    "marvell,sheeva-v5"
 			    "nvidia,tegra132-denver"
+			    "nvidia,tegra186-denver"
 			    "qcom,krait"
 			    "qcom,kryo"
 			    "qcom,scorpion"
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index 454b1be..05f95c3 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -178,6 +178,9 @@
 - AM5728 IDK
   compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"
 
+- AM5718 IDK
+  compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7"
+
 - DRA742 EVM:  Software Development Board for DRA742
   compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7"
 
diff --git a/Documentation/devicetree/bindings/arm/oxnas.txt b/Documentation/devicetree/bindings/arm/oxnas.txt
index b9e4971..ac64e60 100644
--- a/Documentation/devicetree/bindings/arm/oxnas.txt
+++ b/Documentation/devicetree/bindings/arm/oxnas.txt
@@ -5,5 +5,10 @@
   Required root node property:
     compatible: "oxsemi,ox810se"
 
+Boards with the OX820 SoC shall have the following properties:
+  Required root node property:
+    compatible: "oxsemi,ox820"
+
 Board compatible values:
   - "wd,mbwe" (OX810SE)
+  - "cloudengines,pogoplugv3" (OX820)
diff --git a/Documentation/devicetree/bindings/arm/qcom.txt b/Documentation/devicetree/bindings/arm/qcom.txt
index 3e24518..43abf4e 100644
--- a/Documentation/devicetree/bindings/arm/qcom.txt
+++ b/Documentation/devicetree/bindings/arm/qcom.txt
@@ -22,6 +22,7 @@
 	msm8916
 	msm8974
 	msm8996
+	mdm9615
 
 The 'board' element must be one of the following strings:
 
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 55f388f..e921f3e 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -25,6 +25,10 @@
     Required root node properties:
       - compatible = "radxa,rock2-square", "rockchip,rk3288";
 
+- Rikomagic MK808 v1 board:
+    Required root node properties:
+      - compatible = "rikomagic,mk808", "rockchip,rk3066a";
+
 - Firefly Firefly-RK3288 board:
     Required root node properties:
       - compatible = "firefly,firefly-rk3288", "rockchip,rk3288";
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
index 0ea7f14..5160fa5 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
@@ -22,6 +22,9 @@
   * FriendlyARM
 	- "friendlyarm,tiny4412"  - for Exynos4412-based FriendlyARM
 				    TINY4412 board.
+  * TOPEET
+	- "topeet,itop4412-elite" - for Exynos4412-based TOPEET
+                                    Elite base board.
 
   * Google
 	- "google,pi"		- for Exynos5800-based Google Peach Pi
diff --git a/Documentation/devicetree/bindings/arm/swir.txt b/Documentation/devicetree/bindings/arm/swir.txt
new file mode 100644
index 0000000..042be73
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/swir.txt
@@ -0,0 +1,12 @@
+Sierra Wireless Modules device tree bindings
+--------------------------------------------
+
+Supported Modules :
+ - WP8548 : Includes MDM9615 and PM8018 in a module
+
+Sierra Wireless modules shall have the following properties :
+  Required root node property
+   - compatible: "swir,wp8548" for the WP8548 CF3 Module
+
+Board compatible values:
+  - "swir,mangoh-green-wp8548" for the mangOH green board with the WP8548 module
diff --git a/Documentation/devicetree/bindings/ata/ahci-st.txt b/Documentation/devicetree/bindings/ata/ahci-st.txt
index e1d01df..909c993 100644
--- a/Documentation/devicetree/bindings/ata/ahci-st.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-st.txt
@@ -18,21 +18,6 @@
 
 Example:
 
-	/* Example for stih416 */
-	sata0: sata@fe380000 {
-		compatible	= "st,ahci";
-		reg		= <0xfe380000 0x1000>;
-		interrupts	= <GIC_SPI 157 IRQ_TYPE_NONE>;
-		interrupt-names	= "hostc";
-		phys		= <&phy_port0 PHY_TYPE_SATA>;
-		phy-names	= "ahci_phy";
-		resets		= <&powerdown STIH416_SATA0_POWERDOWN>,
-				  <&softreset STIH416_SATA0_SOFTRESET>;
-		reset-names	= "pwr-dwn", "sw-rst";
-		clocks		= <&clk_s_a0_ls CLK_ICN_REG>;
-		clock-names	= "ahci_clk";
-	};
-
 	/* Example for stih407 family silicon */
 	sata0: sata@9b20000 {
 		compatible	= "st,ahci";
diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
index c3d0165..30fd220 100644
--- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
@@ -17,7 +17,9 @@
 - #interrupt-cells: Specifies the number of cells needed to encode an
   interrupt source.
 - gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells : Should be one.  It is the pin number.
+- #gpio-cells : Should be two.  The first cell is the pin number and
+  the second cell is used to specify flags. See gpio.txt for possible
+  values.
 
 Example for a MMP platform:
 
@@ -27,7 +29,7 @@
 		interrupts = <49>;
 		interrupt-names = "gpio_mux";
 		gpio-controller;
-		#gpio-cells = <1>;
+		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
       };
diff --git a/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt
index e893615..b48d7d3 100644
--- a/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt
+++ b/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt
@@ -12,7 +12,7 @@
 
 Example:
 
-mailbox: mailbox@7e00b800 {
+mailbox: mailbox@7e00b880 {
 	compatible = "brcm,bcm2835-mbox";
 	reg = <0x7e00b880 0x40>;
 	interrupts = <0 1>;
diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
index 07184e8..ea9c1c9 100644
--- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
@@ -13,6 +13,7 @@
 	- "rockchip,rk2928-dw-mshc": for Rockchip RK2928 and following,
 							before RK3288
 	- "rockchip,rk3288-dw-mshc": for Rockchip RK3288
+	- "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK1108
 	- "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3036
 	- "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3368
 	- "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3399
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
index 66dcaa9..e705acd 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
@@ -7,6 +7,9 @@
 
 - reg : offset and length of the register set for the mux registers
 
+- #pinctrl-cells : number of cells in addition to the index, set to 1
+  for pinctrl-single,pins and 2 for pinctrl-single,bits
+
 - pinctrl-single,register-width : pinmux register access width in bits
 
 - pinctrl-single,function-mask : mask of allowed pinmux function bits
diff --git a/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt b/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
index 1cfd21d..9252713 100644
--- a/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+++ b/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
@@ -16,15 +16,14 @@
 controller binding usage.
 
 Required properties:
-- compatible: Should be "st,<chip>-powerdown"
-	ex: "st,stih415-powerdown", "st,stih416-powerdown"
+- compatible: Should be "st,stih407-powerdown"
 - #reset-cells: 1, see below
 
 example:
 
 	powerdown: powerdown-controller {
+		compatible = "st,stih407-powerdown";
 		#reset-cells = <1>;
-		compatible = "st,stih415-powerdown";
 	};
 
 
@@ -37,11 +36,10 @@
 
 example:
 
-	usb1: usb@fe200000 {
-		resets	= <&powerdown STIH41X_USB1_POWERDOWN>;
+	st_dwc3: dwc3@8f94000 {
+		resets          = <&powerdown STIH407_USB3_POWERDOWN>,
 	};
 
 Macro definitions for the supported reset channels can be found in:
 
-include/dt-bindings/reset/stih415-resets.h
-include/dt-bindings/reset/stih416-resets.h
+include/dt-bindings/reset/stih407-resets.h
diff --git a/Documentation/devicetree/bindings/reset/st,sti-softreset.txt b/Documentation/devicetree/bindings/reset/st,sti-softreset.txt
index 891a2fd..a21658f 100644
--- a/Documentation/devicetree/bindings/reset/st,sti-softreset.txt
+++ b/Documentation/devicetree/bindings/reset/st,sti-softreset.txt
@@ -15,15 +15,14 @@
 controller binding usage.
 
 Required properties:
-- compatible: Should be "st,<chip>-softreset" example:
-	"st,stih415-softreset" or "st,stih416-softreset";
+- compatible: Should be st,stih407-softreset";
 - #reset-cells: 1, see below
 
 example:
 
 	softreset: softreset-controller {
 		#reset-cells = <1>;
-		compatible = "st,stih415-softreset";
+		compatible = "st,stih407-softreset";
 	};
 
 
@@ -42,5 +41,4 @@
 
 Macro definitions for the supported reset channels can be found in:
 
-include/dt-bindings/reset/stih415-resets.h
-include/dt-bindings/reset/stih416-resets.h
+include/dt-bindings/reset/stih407-resets.h
diff --git a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt
index 845850c..c93a2d1 100644
--- a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt
+++ b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt
@@ -10,7 +10,7 @@
   See ../reset/reset.txt for details.
 - reset-names : Must include the following entries:
   - serial
-- dmas : Must contain an entry for each entry in clock-names.
+- dmas : Must contain an entry for each entry in dma-names.
   See ../dma/dma.txt for details.
 - dma-names : Must include the following entries:
   - rx
diff --git a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
index e8f15e3..16fe94d 100644
--- a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
+++ b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
@@ -9,17 +9,20 @@
 
 The driver implements the Generic PM domain bindings described in
 power/power_domain.txt. It provides the power domains defined in
-include/dt-bindings/power/mt8173-power.h.
+include/dt-bindings/power/mt8173-power.h and mt2701-power.h.
 
 Required properties:
-- compatible: Must be "mediatek,mt8173-scpsys"
+- compatible: Should be one of:
+	- "mediatek,mt2701-scpsys"
+	- "mediatek,mt8173-scpsys"
 - #power-domain-cells: Must be 1
 - reg: Address range of the SCPSYS unit
 - infracfg: must contain a phandle to the infracfg controller
 - clock, clock-names: clocks according to the common clock binding.
-                      The clocks needed "mm", "mfg", "venc" and "venc_lt".
-		      These are the clocks which hardware needs to be enabled
-		      before enabling certain power domains.
+                      These are clocks which hardware needs to be
+                      enabled before enabling certain power domains.
+	Required clocks for MT2701: "mm", "mfg", "ethif"
+	Required clocks for MT8173: "mm", "mfg", "venc", "venc_lt"
 
 Optional properties:
 - vdec-supply: Power supply for the vdec power domain
diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt
new file mode 100644
index 0000000..474531d
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt
@@ -0,0 +1,17 @@
+Binding for Thermal Sensor driver for BCM2835 SoCs.
+
+Required parameters:
+-------------------
+
+compatible: 	should be one of: "brcm,bcm2835-thermal",
+		"brcm,bcm2836-thermal" or "brcm,bcm2837-thermal"
+reg:		Address range of the thermal registers.
+clocks: 	Phandle of the clock used by the thermal sensor.
+
+Example:
+
+thermal: thermal@7e212000 {
+	compatible = "brcm,bcm2835-thermal";
+	reg = <0x7e212000 0x8>;
+	clocks = <&clocks BCM2835_CLOCK_TSENS>;
+};
diff --git a/Documentation/devicetree/bindings/thermal/st-thermal.txt b/Documentation/devicetree/bindings/thermal/st-thermal.txt
index 3b9251b..a2f9391 100644
--- a/Documentation/devicetree/bindings/thermal/st-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/st-thermal.txt
@@ -3,17 +3,8 @@
 Required parameters:
 -------------------
 
-compatible : 	st,<SoC>-<module>-thermal; should be one of:
-		  "st,stih415-sas-thermal",
-		  "st,stih415-mpe-thermal",
-		  "st,stih416-sas-thermal"
-		  "st,stih416-mpe-thermal"
-		  "st,stid127-thermal" or
-		  "st,stih407-thermal"
-		according to the SoC type (stih415, stih416, stid127, stih407)
-		and module type (sas or mpe). On stid127 & stih407 there is only
-		one die/module, so there is no module type in the compatible
-		string.
+compatible : 	Should be "st,stih407-thermal"
+
 clock-names : 	Should be "thermal".
 		  See: Documentation/devicetree/bindings/resource-names.txt
 clocks : 	Phandle of the clock used by the thermal sensor.
@@ -25,18 +16,17 @@
 reg : 		For non-sysconf based sensors, this should be the physical base
 		address and length of the sensor's registers.
 interrupts :	Standard way to define interrupt number.
-		Interrupt is mandatory to be defined when compatible is
-		"stih416-mpe-thermal".
 		  NB: For thermal sensor's for which no interrupt has been
 		  defined, a polling delay of 1000ms will be used to read the
 		  temperature from device.
 
 Example:
 
-	temp1@fdfe8000 {
-		compatible	= "st,stih416-mpe-thermal";
-		reg		= <0xfdfe8000 0x10>;
-		clock-names	= "thermal";
-		clocks		= <&clk_m_mpethsens>;
-		interrupts	= <GIC_SPI 23 IRQ_TYPE_NONE>;
+	temp0@91a0000 {
+		compatible = "st,stih407-thermal";
+		reg = <0x91a0000 0x28>;
+		clock-names = "thermal";
+		clocks = <&CLK_SYSIN>;
+		interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
+		st,passive_cooling_temp = <110>;
 	};
diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt
index f4262ed..ad8ea56 100644
--- a/Documentation/devicetree/bindings/usb/atmel-usb.txt
+++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt
@@ -6,9 +6,9 @@
  - compatible: Should be "atmel,at91rm9200-ohci" for USB controllers
    used in host mode.
  - reg: Address and length of the register set for the device
- - interrupts: Should contain ehci interrupt
+ - interrupts: Should contain ohci interrupt
  - clocks: Should reference the peripheral, host and system clocks
- - clock-names: Should contains two strings
+ - clock-names: Should contain three strings
 		"ohci_clk" for the peripheral clock
 		"hclk" for the host clock
 		"uhpck" for the system clock
@@ -35,7 +35,7 @@
  - reg: Address and length of the register set for the device
  - interrupts: Should contain ehci interrupt
  - clocks: Should reference the peripheral and the UTMI clocks
- - clock-names: Should contains two strings
+ - clock-names: Should contain two strings
 		"ehci_clk" for the peripheral clock
 		"usb_clk" for the UTMI clock
 
@@ -58,7 +58,7 @@
  - reg: Address and length of the register set for the device
  - interrupts: Should contain macb interrupt
  - clocks: Should reference the peripheral and the AHB clocks
- - clock-names: Should contains two strings
+ - clock-names: Should contain two strings
 		"pclk" for the peripheral clock
 		"hclk" for the AHB clock
 
@@ -85,7 +85,7 @@
  - reg: Address and length of the register set for the device
  - interrupts: Should contain usba interrupt
  - clocks: Should reference the peripheral and host clocks
- - clock-names: Should contains two strings
+ - clock-names: Should contain two strings
 		"pclk" for the peripheral clock
 		"hclk" for the host clock
  - ep childnode: To specify the number of endpoints and their properties.
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 6e25c91..448c831 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -70,6 +70,7 @@
 crystalfontz	Crystalfontz America, Inc.
 cubietech	Cubietech, Ltd.
 cypress	Cypress Semiconductor Corporation
+cznic	CZ.NIC, z.s.p.o.
 dallas	Maxim Integrated Products (formerly Dallas Semiconductor)
 davicom	DAVICOM Semiconductor, Inc.
 delta	Delta Electronics, Inc.
@@ -242,6 +243,7 @@
 renesas	Renesas Electronics Corporation
 richtek	Richtek Technology Corporation
 ricoh	Ricoh Co. Ltd.
+rikomagic	Rikomagic Tech Corp. Ltd
 rockchip	Fuzhou Rockchip Electronics Co., Ltd
 samsung	Samsung Semiconductor
 samtec	Samtec/Softing company
diff --git a/MAINTAINERS b/MAINTAINERS
index 0ed5010..3d7cf99 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1503,8 +1503,9 @@
 L:	linux-oxnas@lists.tuxfamily.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-oxnas/
-F:	arch/arm/boot/dts/oxnas*
+F:	arch/arm/boot/dts/ox8*.dtsi
 F:	arch/arm/boot/dts/wd-mbwe.dts
+F:	arch/arm/boot/dts/cloudengines-pogoplug-series-3.dts
 N:	oxnas
 
 ARM/Mediatek RTC DRIVER
@@ -1805,9 +1806,7 @@
 F:	drivers/media/platform/sti/c8sectpfe/
 F:	drivers/mmc/host/sdhci-st.c
 F:	drivers/phy/phy-miphy28lp.c
-F:	drivers/phy/phy-miphy365x.c
 F:	drivers/phy/phy-stih407-usb.c
-F:	drivers/phy/phy-stih41x-usb.c
 F:	drivers/pinctrl/pinctrl-st.c
 F:	drivers/remoteproc/st_remoteproc.c
 F:	drivers/remoteproc/st_slim_rproc.c
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index c558ba7..cccdbcb 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -75,6 +75,7 @@
 	bcm4708-asus-rt-ac56u.dtb \
 	bcm4708-asus-rt-ac68u.dtb \
 	bcm4708-buffalo-wzr-1750dhp.dtb \
+	bcm4708-luxul-xap-1510.dtb \
 	bcm4708-luxul-xwc-1000.dtb \
 	bcm4708-netgear-r6250.dtb \
 	bcm4708-netgear-r6300-v2.dtb \
@@ -86,11 +87,16 @@
 	bcm4709-buffalo-wxr-1900dhp.dtb \
 	bcm4709-netgear-r7000.dtb \
 	bcm4709-netgear-r8000.dtb \
+	bcm4709-tplink-archer-c9-v1.dtb \
 	bcm47094-dlink-dir-885l.dtb \
+	bcm47094-luxul-xwr-3100.dtb \
+	bcm47094-netgear-r8500.dtb \
 	bcm94708.dtb \
 	bcm94709.dtb \
 	bcm953012er.dtb \
 	bcm953012k.dtb
+dtb-$(CONFIG_ARCH_BCM_53573) += \
+	bcm47189-tenda-ac9.dtb
 dtb-$(CONFIG_ARCH_BCM_63XX) += \
 	bcm963138dvt.dtb
 dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
@@ -136,6 +142,7 @@
 	exynos4210-smdkv310.dtb \
 	exynos4210-trats.dtb \
 	exynos4210-universal_c210.dtb \
+	exynos4412-itop-elite.dtb \
 	exynos4412-odroidu3.dtb \
 	exynos4412-odroidx.dtb \
 	exynos4412-odroidx2.dtb \
@@ -330,6 +337,7 @@
 	imx6dl-aristainetos_7.dtb \
 	imx6dl-aristainetos2_4.dtb \
 	imx6dl-aristainetos2_7.dtb \
+	imx6dl-colibri-eval-v3.dtb \
 	imx6dl-cubox-i.dtb \
 	imx6dl-dfi-fs700-m60.dtb \
 	imx6dl-gw51xx.dtb \
@@ -340,6 +348,7 @@
 	imx6dl-gw552x.dtb \
 	imx6dl-gw553x.dtb \
 	imx6dl-hummingboard.dtb \
+	imx6dl-icore.dtb \
 	imx6dl-nit6xlite.dtb \
 	imx6dl-nitrogen6x.dtb \
 	imx6dl-phytec-pbab01.dtb \
@@ -381,10 +390,12 @@
 	imx6q-gw553x.dtb \
 	imx6q-h100.dtb \
 	imx6q-hummingboard.dtb \
+	imx6q-icore.dtb \
 	imx6q-icore-rqs.dtb \
 	imx6q-marsboard.dtb \
 	imx6q-nitrogen6x.dtb \
 	imx6q-nitrogen6_max.dtb \
+	imx6q-nitrogen6_som2.dtb \
 	imx6q-novena.dtb \
 	imx6q-phytec-pbab01.dtb \
 	imx6q-rex-pro.dtb \
@@ -416,14 +427,19 @@
 	imx6sx-sabreauto.dtb \
 	imx6sx-sdb-reva.dtb \
 	imx6sx-sdb-sai.dtb \
-	imx6sx-sdb.dtb
+	imx6sx-sdb.dtb \
+	imx6sx-udoo-neo-basic.dtb \
+	imx6sx-udoo-neo-extended.dtb \
+	imx6sx-udoo-neo-full.dtb
 dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ul-14x14-evk.dtb \
 	imx6ul-geam-kit.dtb \
+	imx6ul-liteboard.dtb \
 	imx6ul-pico-hobbit.dtb \
 	imx6ul-tx6ul-0010.dtb \
 	imx6ul-tx6ul-0011.dtb \
-	imx6ul-tx6ul-mainboard.dtb
+	imx6ul-tx6ul-mainboard.dtb \
+	imx6ull-14x14-evk.dtb
 dtb-$(CONFIG_SOC_IMX7D) += \
 	imx7d-cl-som-imx7.dtb \
 	imx7d-colibri-eval-v3.dtb \
@@ -561,6 +577,7 @@
 	am335x-sl50.dtb \
 	am335x-wega-rdk.dtb
 dtb-$(CONFIG_ARCH_OMAP4) += \
+	omap4-droid4-xt894.dtb \
 	omap4-duovero-parlor.dtb \
 	omap4-kc1.dtb \
 	omap4-panda.dtb \
@@ -588,15 +605,18 @@
 	am57xx-cl-som-am57x.dtb \
 	am57xx-sbc-am57x.dtb \
 	am572x-idk.dtb \
+	am571x-idk.dtb \
 	dra7-evm.dtb \
 	dra72-evm.dtb \
-	dra72-evm-revc.dtb
+	dra72-evm-revc.dtb \
+	dra71-evm.dtb
 dtb-$(CONFIG_ARCH_ORION5X) += \
 	orion5x-kuroboxpro.dtb \
 	orion5x-lacie-d2-network.dtb \
 	orion5x-lacie-ethernet-disk-mini-v2.dtb \
 	orion5x-linkstation-lsgl.dtb \
 	orion5x-linkstation-lswtgl.dtb \
+	orion5x-lschl.dtb \
 	orion5x-lswsgl.dtb \
 	orion5x-maxtor-shared-storage-2.dtb \
 	orion5x-netgear-wnr854t.dtb \
@@ -604,7 +624,8 @@
 dtb-$(CONFIG_ARCH_PRIMA2) += \
 	prima2-evb.dtb
 dtb-$(CONFIG_ARCH_OXNAS) += \
-	wd-mbwe.dtb
+	wd-mbwe.dtb \
+	cloudengines-pogoplug-series-3.dtb
 dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-apq8060-dragonboard.dtb \
 	qcom-apq8064-arrow-sd-600eval.dtb \
@@ -620,7 +641,8 @@
 	qcom-msm8660-surf.dtb \
 	qcom-msm8960-cdp.dtb \
 	qcom-msm8974-lge-nexus5-hammerhead.dtb \
-	qcom-msm8974-sony-xperia-honami.dtb
+	qcom-msm8974-sony-xperia-honami.dtb \
+	qcom-mdm9615-wp8548-mangoh-green.dtb
 dtb-$(CONFIG_ARCH_REALVIEW) += \
 	arm-realview-pb1176.dtb \
 	arm-realview-pb11mp.dtb \
@@ -635,11 +657,14 @@
 	arm-realview-pba8.dtb \
 	arm-realview-pbx-a9.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += \
+	rk1108-evb.dtb \
 	rk3036-evb.dtb \
 	rk3036-kylin.dtb \
 	rk3066a-bqcurie2.dtb \
 	rk3066a-marsboard.dtb \
+	rk3066a-mk808.dtb \
 	rk3066a-rayeager.dtb \
+	rk3188-px3-evb.dtb \
 	rk3188-radxarock.dtb \
 	rk3228-evb.dtb \
 	rk3229-evb.dtb \
@@ -677,6 +702,8 @@
 	r7s72100-rskrza1.dtb \
 	r8a73a4-ape6evm.dtb \
 	r8a7740-armadillo800eva.dtb \
+	r8a7743-sk-rzg1m.dtb \
+	r8a7745-sk-rzg1e.dtb \
 	r8a7778-bockw.dtb \
 	r8a7779-marzen.dtb \
 	r8a7790-lager.dtb \
@@ -690,12 +717,14 @@
 	sh73a0-kzm9g.dtb
 dtb-$(CONFIG_ARCH_SOCFPGA) += \
 	socfpga_arria5_socdk.dtb \
+	socfpga_arria10_socdk_qspi.dtb \
 	socfpga_arria10_socdk_sdmmc.dtb \
 	socfpga_cyclone5_mcvevk.dtb \
 	socfpga_cyclone5_socdk.dtb \
 	socfpga_cyclone5_de0_sockit.dtb \
 	socfpga_cyclone5_sockit.dtb \
 	socfpga_cyclone5_socrates.dtb \
+	socfpga_cyclone5_sodia.dtb \
 	socfpga_cyclone5_vining_fpga.dtb \
 	socfpga_vt.dtb
 dtb-$(CONFIG_ARCH_SPEAR13XX) += \
@@ -712,16 +741,12 @@
 	stih407-b2120.dtb \
 	stih410-b2120.dtb \
 	stih410-b2260.dtb \
-	stih415-b2000.dtb \
-	stih415-b2020.dtb \
-	stih416-b2000.dtb \
-	stih416-b2020.dtb \
-	stih416-b2020e.dtb \
 	stih418-b2199.dtb
 dtb-$(CONFIG_ARCH_STM32)+= \
 	stm32f429-disco.dtb \
 	stm32f469-disco.dtb \
-	stm32429i-eval.dtb
+	stm32429i-eval.dtb \
+	stm32746g-eval.dtb
 dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-a1000.dtb \
 	sun4i-a10-ba10-tvbox.dtb \
@@ -760,6 +785,7 @@
 	sun5i-a13-olinuxino-micro.dtb \
 	sun5i-a13-q8-tablet.dtb \
 	sun5i-a13-utoo-p66.dtb \
+	sun5i-gr8-chip-pro.dtb \
 	sun5i-gr8-evb.dtb \
 	sun5i-r8-chip.dtb
 dtb-$(CONFIG_MACH_SUN6I) += \
@@ -897,6 +923,7 @@
 	wm8750-apc8750.dtb \
 	wm8850-w70v2.dtb
 dtb-$(CONFIG_ARCH_ZYNQ) += \
+	zynq-microzed.dtb \
 	zynq-parallella.dtb \
 	zynq-zc702.dtb \
 	zynq-zc706.dtb \
@@ -920,6 +947,7 @@
 	armada-385-db-ap.dtb \
 	armada-385-linksys-caiman.dtb \
 	armada-385-linksys-cobra.dtb \
+	armada-385-turris-omnia.dtb \
 	armada-388-clearfog.dtb \
 	armada-388-db.dtb \
 	armada-388-gp.dtb \
diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
index a9a9730..501c752 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir2110.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
@@ -54,16 +54,22 @@
 	dr_mode = "host";
 };
 
+&davinci_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <1>;
+	};
+};
+
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <1>;
 	phy-mode = "rmii";
 	dual_emac_res_vlan = <1>;
+	phy-handle = <&phy0>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <7>;
 	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <2>;
+	phy-handle = <&phy1>;
 };
 
 &phy_sel {
diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
index fe002a1..19f53b8 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
@@ -109,9 +109,9 @@
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <7>;
 	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <2>;
+	phy-handle = <&phy1>;
 };
 
 &phy_sel {
diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
index d0faa7b..2b9d7f4 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
@@ -114,7 +114,7 @@
 
 &usb1 {
 	status = "okay";
-	dr_mode = "otg";
+	dr_mode = "host";
 };
 
 &cpsw_emac0 {
@@ -127,9 +127,9 @@
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <7>;
 	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <2>;
+	phy-handle = <&phy1>;
 };
 
 &phy_sel {
diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
index dd45d17..efb5eae 100644
--- a/arch/arm/boot/dts/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -364,11 +364,14 @@
 };
 
 &davinci_mdio {
+	status = "okay";
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 
-	status = "okay";
+	phy1: ethernet-phy@1 {
+		reg = <7>;
+	};
 };
 
 &mmc1 {
@@ -406,3 +409,7 @@
 &gpio0 {
 	ti,no-reset-on-init;
 };
+
+&gpio3 {
+	ti,no-reset-on-init;
+};
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index 007b5e5..dc561d5 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -6,6 +6,8 @@
  * published by the Free Software Foundation.
  */
 
+#include <dt-bindings/mfd/tps65217.h>
+
 / {
 	cpus {
 		cpu@0 {
@@ -310,8 +312,23 @@
 	 * by the hardware problems. (Tip: double-check by performing a current
 	 * measurement after shutdown: it should be less than 1 mA.)
 	 */
+
+	interrupts = <7>; /* NMI */
+	interrupt-parent = <&intc>;
+
 	ti,pmic-shutdown-controller;
 
+	charger {
+		interrupts = <TPS65217_IRQ_AC>, <TPS65217_IRQ_USB>;
+		interrupts-names = "AC", "USB";
+		status = "okay";
+	};
+
+	pwrbutton {
+		interrupts = <TPS65217_IRQ_PB>;
+		status = "okay";
+	};
+
 	regulators {
 		dcdc1_reg: regulator@0 {
 			regulator-name = "vdds_dpr";
@@ -393,3 +410,8 @@
 &sham {
 	status = "okay";
 };
+
+&rtc {
+	clocks = <&clk_32768_ck>, <&clkdiv32k_ick>;
+	clock-names = "ext-clk", "int-clk";
+};
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
index 6bbb1fe..db00d8e 100644
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -79,6 +79,14 @@
 
 &lcdc {
 	status = "okay";
+
+	/* If you want to get 24 bit RGB and 16 BGR mode instead of
+	 * current 16 bit RGB and 24 BGR modes, set the propety
+	 * below to "crossed" and uncomment the video-ports -property
+	 * in tda19988 node.
+	 */
+	blue-and-red-wiring = "straight";
+
 	port {
 		lcdc_0: endpoint@0 {
 			remote-endpoint = <&hdmi_0>;
@@ -95,6 +103,9 @@
 		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
 		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
 
+		/* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */
+		/* video-ports = <0x234501>; */
+
 		#sound-dai-cells = <0>;
 		audio-ports = <	TDA998x_I2S	0x03>;
 
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index e82432c..c2186ec 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -783,3 +783,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&dcan1_pins_default>;
 };
+
+&rtc {
+	clocks = <&clk_32768_ck>, <&clkdiv32k_ick>;
+	clock-names = "ext-clk", "int-clk";
+};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 975c36e..e2548d1 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -715,3 +715,8 @@
 
 	blue-and-red-wiring = "crossed";
 };
+
+&rtc {
+	clocks = <&clk_32768_ck>, <&clkdiv32k_ick>;
+	clock-names = "ext-clk", "int-clk";
+};
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
index 85e04c2..1463df3 100644
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -43,52 +43,52 @@
 		enable-active-high;
 	};
 
-	leds0 {
+	leds-iio {
+		status = "disabled";
 		compatible = "gpio-leds";
-
-		led0 {
+		led-out0 {
 			label = "out0";
 			gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led1 {
+		led-out1 {
 			label = "out1";
 			gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led2 {
+		led-out2 {
 			label = "out2";
 			gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led3 {
+		led-out3 {
 			label = "out3";
 			gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led4 {
+		led-out4 {
 			label = "out4";
 			gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led5 {
+		led-out5 {
 			label = "out5";
 			gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led6 {
+		led-out6 {
 			label = "out6";
 			gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led7 {
+		led-out7 {
 			label = "out7";
 			gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
@@ -187,6 +187,8 @@
 			AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* (B17) spi0_d0.spi0_d0 */
 			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* (B16) spi0_d1.spi0_d1 */
 			AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* (A16) spi0_cs0.spi0_cs0 */
+			AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE0) /* (C15) spi0_cs1.spi0_cs1 */
+			AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* (B12) mcasp0_aclkr.gpio3[18] */
 		>;
 	};
 
@@ -224,6 +226,31 @@
 	};
 };
 
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_default>;
+
+	sn65hvs882@1 {
+		compatible = "pisosr-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		load-gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
+
+		reg = <1>;
+		spi-max-frequency = <1000000>;
+		spi-cpol;
+	};
+};
+
+&tscadc {
+	status = "okay";
+	adc {
+		ti,adc-channels = <1 2 3 4 5 6 7>;
+	};
+};
+
 #include "tps65910.dtsi"
 
 &tps {
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 194d884..64c8aa9 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -130,6 +130,7 @@
 				reg = <0x210000 0x2000>;
 				#address-cells = <1>;
 				#size-cells = <1>;
+				#pinctrl-cells = <1>;
 				ranges = <0 0x210000 0x2000>;
 
 				am33xx_pinmux: pinmux@800 {
@@ -137,6 +138,7 @@
 					reg = <0x800 0x238>;
 					#address-cells = <1>;
 					#size-cells = <0>;
+					#pinctrl-cells = <1>;
 					pinctrl-single,register-width = <32>;
 					pinctrl-single,function-mask = <0x7f>;
 				};
@@ -505,6 +507,8 @@
 			interrupts = <75
 				      76>;
 			ti,hwmods = "rtc";
+			clocks = <&clkdiv32k_ick>;
+			clock-names = "int-clk";
 		};
 
 		spi0: spi@48030000 {
@@ -855,6 +859,8 @@
 			interrupts = <16>;
 			ti,hwmods = "adc_tsc";
 			status = "disabled";
+			dmas = <&edma 53 0>, <&edma 57 0>;
+			dma-names = "fifo0", "fifo1";
 
 			tsc {
 				compatible = "ti,am3359-tsc";
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
index 0db19d3..9fe545d 100644
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -66,6 +66,7 @@
 			reg = <0x480025d8 0x24>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			#pinctrl-cells = <1>;
 			#interrupt-cells = <1>;
 			interrupt-controller;
 			pinctrl-single,register-width = <16>;
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index a275fa9..ac55f93 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -189,6 +189,7 @@
 					reg = <0x800 0x31c>;
 					#address-cells = <1>;
 					#size-cells = <0>;
+					#pinctrl-cells = <1>;
 					#interrupt-cells = <1>;
 					interrupt-controller;
 					pinctrl-single,register-width = <32>;
@@ -871,6 +872,8 @@
 			clocks = <&adc_tsc_fck>;
 			clock-names = "fck";
 			status = "disabled";
+			dmas = <&edma 53 0>, <&edma 57 0>;
+			dma-names = "fifo0", "fifo1";
 
 			tsc {
 				compatible = "ti,am3359-tsc";
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
index 25ce611..b76a7c0 100644
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -117,6 +117,58 @@
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 	};
+
+	leds-iio {
+		status = "disabled";
+		compatible = "gpio-leds";
+		led-out0 {
+			label = "out0";
+			gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out1 {
+			label = "out1";
+			gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out2 {
+			label = "out2";
+			gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out3 {
+			label = "out3";
+			gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out4 {
+			label = "out4";
+			gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out5 {
+			label = "out5";
+			gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out6 {
+			label = "out6";
+			gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out7 {
+			label = "out7";
+			gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
 };
 
 &am43xx_pinmux {
@@ -178,6 +230,24 @@
 		>;
 	};
 
+	spi1_pins_default: spi1_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x908, PIN_INPUT | MUX_MODE2)	/* mii1_col.spi1_sclk */
+			AM4372_IOPAD(0x910, PIN_INPUT | MUX_MODE2)	/* mii1_rx_er.spi1_d1 */
+			AM4372_IOPAD(0x944, PIN_OUTPUT | MUX_MODE2)	/* rmii1_ref_clk.spi1_cs0 */
+			AM4372_IOPAD(0x90c, PIN_OUTPUT | MUX_MODE7)	/* mii1_crs.gpio3_1 */
+		>;
+	};
+
+	spi1_pins_sleep: spi1_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
 	ecap0_pins_default: backlight_pins_default {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* ecap0_in_pwm0_out.ecap0_in_pwm0_out */
@@ -290,6 +360,33 @@
 	pinctrl-0 = <&i2c2_pins_default>;
 	pinctrl-1 = <&i2c2_pins_sleep>;
 	clock-frequency = <100000>;
+
+	tpic2810: tpic2810@60 {
+		compatible = "ti,tpic2810";
+		reg = <0x60>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&spi1_pins_default>;
+	pinctrl-1 = <&spi1_pins_sleep>;
+	ti,pindir-d0-out-d1-in;
+
+	sn65hvs882: sn65hvs882@0 {
+		compatible = "pisosr-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		load-gpios = <&gpio3 1 GPIO_ACTIVE_LOW>;
+
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		spi-cpol;
+	};
 };
 
 &epwmss0 {
@@ -310,6 +407,10 @@
 	status = "okay";
 };
 
+&gpio3 {
+	status = "okay";
+};
+
 &gpio4 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
new file mode 100644
index 0000000..d6e43e5
--- /dev/null
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dra72x.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "am57xx-idk-common.dtsi"
+
+/ {
+	model = "TI AM5718 IDK";
+	compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x40000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		cpu0-led {
+			label = "status0:red:cpu0";
+			gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "cpu0";
+		};
+
+		usr0-led {
+			label = "status0:green:usr";
+			gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		heartbeat-led {
+			label = "status0:blue:heartbeat";
+			gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		usr1-led {
+			label = "status1:red:usr";
+			gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		usr2-led {
+			label = "status1:green:usr";
+			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		mmc0-led {
+			label = "status1:blue:mmc0";
+			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	extcon_usb2: extcon_usb2 {
+	     compatible = "linux,extcon-usb-gpio";
+	     id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&ldo1_reg>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 27 0>; /* gpio 219 */
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
index 87bbc66..27d9149 100644
--- a/arch/arm/boot/dts/am572x-idk.dts
+++ b/arch/arm/boot/dts/am572x-idk.dts
@@ -83,3 +83,7 @@
 	bus-width = <4>;
 	cd-gpios = <&gpio6 27 0>; /* gpio 219 */
 };
+
+&sn65hvs882 {
+	load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
index 6df7829..78bee26 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -204,6 +204,7 @@
 		interrupt-controller;
 
 		ti,system-power-controller;
+		ti,palmas-override-powerhold;
 
 		tps659038_pmic {
 			compatible = "ti,tps659038-pmic";
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index 03cec62..555ae21 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -43,6 +43,58 @@
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	leds-iio {
+		status = "disabled";
+		compatible = "gpio-leds";
+		led-out0 {
+			label = "out0";
+			gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out1 {
+			label = "out1";
+			gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out2 {
+			label = "out2";
+			gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out3 {
+			label = "out3";
+			gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out4 {
+			label = "out4";
+			gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out5 {
+			label = "out5";
+			gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out6 {
+			label = "out6";
+			gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out7 {
+			label = "out7";
+			gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
 };
 
 &i2c1 {
@@ -57,6 +109,7 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		ti,system-power-controller;
+		ti,palmas-override-powerhold;
 
 		tps659038_pmic {
 			compatible = "ti,tps659038-pmic";
@@ -253,6 +306,28 @@
 	};
 };
 
+&mcspi3 {
+	status = "okay";
+	ti,pindir-d0-out-d1-in;
+
+	sn65hvs882: sn65hvs882@0 {
+		compatible = "pisosr-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		spi-cpol;
+	};
+
+	tpic2810: tpic2810@60 {
+		compatible = "ti,tpic2810";
+		reg = <0x60>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
 &uart3 {
 	status = "okay";
 	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 033fa63..a9419f8 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -67,7 +67,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x40000000>; /* 1 GB */
 	};
@@ -86,18 +86,6 @@
 				status = "okay";
 			};
 
-			mdio {
-				pinctrl-0 = <&mdio_pins>;
-				pinctrl-names = "default";
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
 			ethernet@70000 {
 				pinctrl-0 = <&ge0_rgmii_pins>;
 				pinctrl-names = "default";
@@ -182,24 +170,6 @@
 				};
 			};
 		};
-
-		pcie-controller {
-			status = "okay";
-			/*
-			 * The two PCIe units are accessible through
-			 * both standard PCIe slots and mini-PCIe
-			 * slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
 	};
 
 	sound {
@@ -261,6 +231,37 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+	/*
+	 * The two PCIe units are accessible through
+	 * both standard PCIe slots and mini-PCIe
+	 * slots on the board.
+	 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+
 &spi0 {
 	pinctrl-0 = <&spi0_pins2>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
index e2a363b..aeedc46 100644
--- a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
+++ b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
@@ -62,7 +62,7 @@
 		stdout-path = &uart0;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>; /* 512 MiB */
 	};
@@ -72,20 +72,6 @@
 			MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
 			MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
 
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 			sata@a0000 {
 				nr-ports = <2>;
@@ -262,6 +248,20 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
 &pinctrl {
 	sata_l_white_pin: sata-l-white-pin {
 		marvell,pins = "mpp57";
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
index d5e19cd..a142540 100644
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -54,7 +54,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>; /* 512 MB */
 	};
@@ -64,22 +64,6 @@
 			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
 			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
 
-		pcie-controller {
-			status = "okay";
-
-			/* Internal mini-PCIe connector */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Connected on the PCB to a USB 3.0 XHCI controller */
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 			serial@12000 {
 				status = "okay";
@@ -113,17 +97,6 @@
 				};
 			};
 
-			mdio {
-				pinctrl-0 = <&mdio_pins>;
-				pinctrl-names = "default";
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
 			ethernet@70000 {
 				pinctrl-0 = <&ge0_rgmii_pins>;
 				pinctrl-names = "default";
@@ -197,6 +170,34 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+
+	/* Internal mini-PCIe connector */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Connected on the PCB to a USB 3.0 XHCI controller */
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &pinctrl {
 	pwr_led_pin: pwr-led-pin {
 		marvell,pins = "mpp63";
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
index 39181b3..6bd9265 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -56,7 +56,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>; /* 512 MB */
 	};
@@ -66,22 +66,6 @@
 			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
 			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
 
-		pcie-controller {
-			status = "okay";
-
-			/* Connected to Marvell 88SE9170 SATA controller */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Connected to FL1009 USB 3.0 controller */
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 
 			/* RTC is provided by Intersil ISL12057 I2C RTC chip */
@@ -99,14 +83,6 @@
 				status = "okay";
 			};
 
-			mdio {
-				pinctrl-0 = <&mdio_pins>;
-				pinctrl-names = "default";
-				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-					reg = <0>;
-				};
-			};
-
 			ethernet@74000 {
 				pinctrl-0 = <&ge1_rgmii_pins>;
 				pinctrl-names = "default";
@@ -120,8 +96,11 @@
 			};
 
 			i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
 				clock-frequency = <100000>;
+
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+
 				status = "okay";
 
 				isl12057: isl12057@68 {
@@ -257,6 +236,30 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+
+	/* Connected to Marvell 88SE9170 SATA controller */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Connected to FL1009 USB 3.0 controller */
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+	};
+};
+
 &pinctrl {
 	power_led_pin: power-led-pin {
 		marvell,pins = "mpp57";
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
index 1156575..c84ab5b 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -56,7 +56,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>; /* 512 MB */
 	};
@@ -66,22 +66,6 @@
 			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
 			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
 
-		pcie-controller {
-			status = "okay";
-
-			/* Connected to FL1009 USB 3.0 controller */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Connected to Marvell 88SE9215 SATA controller */
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 
 			/* RTC is provided by Intersil ISL12057 I2C RTC chip */
@@ -93,18 +77,6 @@
 				status = "okay";
 			};
 
-			mdio {
-				pinctrl-0 = <&mdio_pins>;
-				pinctrl-names = "default";
-				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
-					reg = <1>;
-				};
-			};
-
 			ethernet@70000 {
 				pinctrl-0 = <&ge0_rgmii_pins>;
 				pinctrl-names = "default";
@@ -126,8 +98,11 @@
 			};
 
 			i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
 				clock-frequency = <100000>;
+
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+
 				status = "okay";
 
 				isl12057: isl12057@68 {
@@ -279,6 +254,34 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+
+	/* Connected to FL1009 USB 3.0 controller */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Connected to Marvell 88SE9215 SATA controller */
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+		reg = <1>;
+	};
+};
+
 &pinctrl {
 	poweroff: poweroff {
 		marvell,pins = "mpp60";
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index fbef730..c3fd6e4 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -67,7 +67,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>; /* 512 MB */
 	};
@@ -77,22 +77,6 @@
 			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
 			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
 
-		pcie-controller {
-			status = "okay";
-
-			/* Internal mini-PCIe connector */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Internal mini-PCIe connector */
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 			serial@12000 {
 				status = "okay";
@@ -102,14 +86,6 @@
 				status = "okay";
 			};
 
-			mdio {
-				pinctrl-0 = <&mdio_pins>;
-				pinctrl-names = "default";
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-			};
-
 			ethernet@70000 {
 				status = "okay";
 				phy = <&phy0>;
@@ -146,7 +122,7 @@
 				compatible = "gpio-keys";
 				#address-cells = <1>;
 				#size-cells = <0>;
-				button@1 {
+				button {
 					label = "Software Button";
 					linux,code = <KEY_POWER>;
 					gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
@@ -196,7 +172,7 @@
 		};
 	};
 
-	dsa@0 {
+	dsa {
 		compatible = "marvell,dsa";
 		#address-cells = <2>;
 		#size-cells = <0>;
@@ -235,7 +211,32 @@
 			};
 		};
 	 };
- };
+};
+
+&pciec {
+	status = "okay";
+
+	/* Internal mini-PCIe connector */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Internal mini-PCIe connector */
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
 
 &pinctrl {
 	fan_pins: fan-pins {
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
index ae2e1fe..eb6af53 100644
--- a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
@@ -28,20 +28,7 @@
 	compatible = "seagate,dart-4", "marvell,armada370", "marvell,armada-370-xp";
 
 	soc {
-		pcie-controller {
-			/* SATA AHCI controller 88SE9170 */
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-
 		internal-regs {
-			mdio {
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
 			ethernet@74000 {
 				status = "okay";
 				pinctrl-0 = <&ge1_rgmii_pins>;
@@ -131,3 +118,17 @@
 			  1300 0>;
 	};
 };
+
+&pciec {
+	/* SATA AHCI controller 88SE9170 */
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
index 3036e25..e9a5b95 100644
--- a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
@@ -23,7 +23,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>; /* 512 MB */
 	};
@@ -32,15 +32,6 @@
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
 
-		pcie-controller {
-			status = "okay";
-
-			/* USB 3.0 bridge ASM1042A */
-			pcie@2,0 {
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 			serial@12000 {
 				status = "okay";
@@ -51,15 +42,6 @@
 				status = "okay";
 			};
 
-			mdio {
-				pinctrl-0 = <&mdio_pins>;
-				pinctrl-names = "default";
-
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-			};
-
 			ethernet@70000 {
 				status = "okay";
 				pinctrl-0 = <&ge0_rgmii_pins>;
@@ -159,19 +141,19 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		button@1 {
+		power {
 			label = "Power button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
 			debounce-interval = <100>;
 		};
-		button@2 {
+		backup {
 			label = "Backup button";
 			linux,code = <KEY_OPTION>;
 			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
 			debounce-interval = <100>;
 		};
-		button@3 {
+		reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
@@ -208,6 +190,25 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+
+	/* USB 3.0 bridge ASM1042A */
+	pcie@2,0 {
+		status = "okay";
+	};
+};
+
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
 &pinctrl {
 	pinctrl-0 = <&hdd0_led_sata_pin>, <&hdd1_led_sata_pin>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
index 01cded3..d079a89 100644
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
@@ -24,7 +24,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>; /* 512 MB */
 	};
@@ -33,15 +33,6 @@
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
 
-		pcie-controller {
-			status = "okay";
-
-			/* USB 3.0 Bridge ASM1042A */
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 			coherency-fabric@20200 {
 				broken-idle;
@@ -51,15 +42,6 @@
 				status = "okay";
 			};
 
-			mdio {
-				pinctrl-0 = <&mdio_pins>;
-				pinctrl-names = "default";
-
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-			};
-
 			ethernet@74000 {
 				status = "okay";
 				pinctrl-0 = <&ge1_rgmii_pins>;
@@ -107,19 +89,19 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		button@1 {
+		power {
 			label = "Power button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
 			debounce-interval = <100>;
 		};
-		button@2 {
+		reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
 			debounce-interval = <100>;
 		};
-		button@3 {
+		button {
 			label = "USB VBUS error";
 			linux,code = <KEY_UNKNOWN>;
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
@@ -143,6 +125,24 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+
+	/* USB 3.0 Bridge ASM1042A */
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
 &pinctrl {
 	pinctrl-0 = <&sata_led_pin>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
index a9cc427..99f9de2 100644
--- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts
+++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
@@ -70,7 +70,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>; /* 512 MB */
 	};
@@ -127,12 +127,6 @@
 				status = "okay";
 			};
 
-			mdio {
-				phy1: ethernet-phy@1 { /* Marvell 88E1512 */
-					reg = <1>;
-				};
-			};
-
 			ethernet@70000 {
 			       status = "okay";
 			       phy = <&phy1>;
@@ -192,7 +186,7 @@
 		pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin>;
 		pinctrl-names = "default";
 
-		sata1_regulator: sata1-regulator {
+		sata1_regulator: sata1-regulator@1 {
 			compatible = "regulator-fixed";
 			reg = <1>;
 			regulator-name = "SATA1 Power";
@@ -205,7 +199,7 @@
 			gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		sata2_regulator: sata2-regulator {
+		sata2_regulator: sata2-regulator@2 {
 			compatible = "regulator-fixed";
 			reg = <2>;
 			regulator-name = "SATA2 Power";
@@ -220,6 +214,12 @@
 	};
 };
 
+&mdio {
+	phy1: ethernet-phy@1 { /* Marvell 88E1512 */
+		reg = <1>;
+	};
+};
+
 &pinctrl {
 	disk1_led_pin: disk1-led-pin {
 		marvell,pins = "mpp31";
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 3ccedc9..b0520bd 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -50,8 +50,6 @@
  * 370 and Armada XP SoC.
  */
 
-/include/ "skeleton64.dtsi"
-
 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
 
 / {
@@ -86,7 +84,7 @@
 		pcie-mem-aperture = <0xf8000000 0x7e00000>;
 		pcie-io-aperture  = <0xffe00000 0x100000>;
 
-		devbus-bootcs {
+		devbus_bootcs: devbus-bootcs {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
@@ -96,7 +94,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs0 {
+		devbus_cs0: devbus-cs0 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
@@ -106,7 +104,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs1 {
+		devbus_cs1: devbus-cs1 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
@@ -116,7 +114,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs2 {
+		devbus_cs2: devbus-cs2 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
@@ -126,7 +124,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs3 {
+		devbus_cs3: devbus-cs3 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
@@ -142,7 +140,7 @@
 			#size-cells = <1>;
 			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
 
-			rtc@10300 {
+			rtc: rtc@10300 {
 				compatible = "marvell,orion-rtc";
 				reg = <0x10300 0x20>;
 				interrupts = <50>;
@@ -214,33 +212,38 @@
 				msi-controller;
 			};
 
-			coherency-fabric@20200 {
+			coherencyfab: coherency-fabric@20200 {
 				compatible = "marvell,coherency-fabric";
 				reg = <0x20200 0xb0>, <0x21010 0x1c>;
 			};
 
-			timer@20300 {
+			timer: timer@20300 {
 				reg = <0x20300 0x30>, <0x21040 0x30>;
 				interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
 			};
 
-			watchdog@20300 {
+			watchdog: watchdog@20300 {
 				reg = <0x20300 0x34>, <0x20704 0x4>;
 			};
 
-			pmsu@22000 {
+			cpurst: cpurst@20800 {
+				compatible = "marvell,armada-370-cpu-reset";
+				reg = <0x20800 0x8>;
+			};
+
+			pmsu: pmsu@22000 {
 				compatible = "marvell,armada-370-pmsu";
 				reg = <0x22000 0x1000>;
 			};
 
-			usb@50000 {
+			usb0: usb@50000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x50000 0x500>;
 				interrupts = <45>;
 				status = "disabled";
 			};
 
-			usb@51000 {
+			usb1: usb@51000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x51000 0x500>;
 				interrupts = <46>;
@@ -254,7 +257,7 @@
 				status = "disabled";
 			};
 
-			mdio: mdio {
+			mdio: mdio@72004 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "marvell,orion-mdio";
@@ -269,7 +272,7 @@
 				status = "disabled";
 			};
 
-			sata@a0000 {
+			sata: sata@a0000 {
 				compatible = "marvell,armada-370-sata";
 				reg = <0xa0000 0x5000>;
 				interrupts = <55>;
@@ -278,7 +281,7 @@
 				status = "disabled";
 			};
 
-			nand@d0000 {
+			nand: nand@d0000 {
 				compatible = "marvell,armada370-nand";
 				reg = <0xd0000 0x54>;
 				#address-cells = <1>;
@@ -288,7 +291,7 @@
 				status = "disabled";
 			};
 
-			mvsdio@d4000 {
+			sdio: mvsdio@d4000 {
 				compatible = "marvell,orion-sdio";
 				reg = <0xd4000 0x200>;
 				interrupts = <54>;
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index b425810..b704bcc 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -50,9 +50,11 @@
  */
 
 #include "armada-370-xp.dtsi"
-/include/ "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	model = "Marvell Armada 370 family SoC";
 	compatible = "marvell,armada370", "marvell,armada-370-xp";
 
@@ -70,7 +72,7 @@
 			reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
 		};
 
-		pcie-controller {
+		pciec: pcie-controller@82000000 {
 			compatible = "marvell,armada-370-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -89,7 +91,7 @@
 				0x82000000 0x2 0     MBUS_ID(0x08, 0xe8) 0       1 0 /* Port 1.0 MEM */
 				0x81000000 0x2 0     MBUS_ID(0x08, 0xe0) 0       1 0 /* Port 1.0 IO  */>;
 
-			pcie@1,0 {
+			pcie0: pcie@1,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
 				reg = <0x0800 0 0 0 0>;
@@ -106,7 +108,7 @@
 				status = "disabled";
 			};
 
-			pcie@2,0 {
+			pcie2: pcie@2,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
@@ -125,7 +127,7 @@
 		};
 
 		internal-regs {
-			L2: l2-cache {
+			L2: l2-cache@8000 {
 				compatible = "marvell,aurora-outer-cache";
 				reg = <0x08000 0x1000>;
 				cache-id-part = <0x100>;
@@ -134,14 +136,6 @@
 				wt-override;
 			};
 
-			i2c0: i2c@11000 {
-				reg = <0x11000 0x20>;
-			};
-
-			i2c1: i2c@11100 {
-				reg = <0x11100 0x20>;
-			};
-
 			gpio0: gpio@18100 {
 				compatible = "marvell,orion-gpio";
 				reg = <0x18100 0x40>;
@@ -175,22 +169,8 @@
 				interrupts = <91>;
 			};
 
-			/*
-			 * Default UART pinctrl setting without RTS/CTS, can
-			 * be overwritten on board level if a different
-			 * configuration is used.
-			 */
-			uart0: serial@12000 {
-				pinctrl-0 = <&uart0_pins>;
-				pinctrl-names = "default";
-			};
 
-			uart1: serial@12100 {
-				pinctrl-0 = <&uart1_pins>;
-				pinctrl-names = "default";
-			};
-
-			system-controller@18200 {
+			systemc: system-controller@18200 {
 				compatible = "marvell,armada-370-xp-system-controller";
 				reg = <0x18200 0x100>;
 			};
@@ -208,37 +188,18 @@
 				#clock-cells = <1>;
 			};
 
-			thermal@18300 {
+			thermal: thermal@18300 {
 				compatible = "marvell,armada370-thermal";
 				reg = <0x18300 0x4
 					0x18304 0x4>;
 				status = "okay";
 			};
 
-			sscg@18330 {
+			sscg: sscg@18330 {
 				reg = <0x18330 0x4>;
 			};
 
-			interrupt-controller@20a00 {
-				reg = <0x20a00 0x1d0>, <0x21870 0x58>;
-			};
-
-			timer@20300 {
-				compatible = "marvell,armada-370-timer";
-				clocks = <&coreclk 2>;
-			};
-
-			watchdog@20300 {
-				compatible = "marvell,armada-370-wdt";
-				clocks = <&coreclk 2>;
-			};
-
-			cpurst@20800 {
-				compatible = "marvell,armada-370-cpu-reset";
-				reg = <0x20800 0x8>;
-			};
-
-			cpu-config@21000 {
+			cpuconf: cpu-config@21000 {
 				compatible = "marvell,armada-370-cpu-config";
 				reg = <0x21000 0x8>;
 			};
@@ -253,15 +214,7 @@
 				status = "disabled";
 			};
 
-			usb@50000 {
-				clocks = <&coreclk 0>;
-			};
-
-			usb@51000 {
-				clocks = <&coreclk 0>;
-			};
-
-			xor@60800 {
+			xor0: xor@60800 {
 				compatible = "marvell,orion-xor";
 				reg = <0x60800 0x100
 				       0x60A00 0x100>;
@@ -280,7 +233,7 @@
 				};
 			};
 
-			xor@60900 {
+			xor1: xor@60900 {
 				compatible = "marvell,orion-xor";
 				reg = <0x60900 0x100
 				       0x60b00 0x100>;
@@ -299,15 +252,7 @@
 				};
 			};
 
-			ethernet@70000 {
-				compatible = "marvell,armada-370-neta";
-			};
-
-			ethernet@74000 {
-				compatible = "marvell,armada-370-neta";
-			};
-
-			crypto@90000 {
+			cesa: crypto@90000 {
 				compatible = "marvell,armada-370-crypto";
 				reg = <0x90000 0x10000>;
 				reg-names = "regs";
@@ -342,6 +287,59 @@
 	};
 };
 
+/*
+ * Default UART pinctrl setting without RTS/CTS, can be overwritten on
+ * board level if a different configuration is used.
+ */
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c0 {
+	reg = <0x11000 0x20>;
+};
+
+&i2c1 {
+	reg = <0x11100 0x20>;
+};
+
+&mpic {
+	reg = <0x20a00 0x1d0>, <0x21870 0x58>;
+};
+
+&timer {
+	compatible = "marvell,armada-370-timer";
+	clocks = <&coreclk 2>;
+};
+
+&watchdog {
+	compatible = "marvell,armada-370-wdt";
+	clocks = <&coreclk 2>;
+};
+
+&usb0 {
+	clocks = <&coreclk 0>;
+};
+
+&usb1 {
+	clocks = <&coreclk 0>;
+};
+
+&eth0 {
+	compatible = "marvell,armada-370-neta";
+};
+
+&eth1 {
+	compatible = "marvell,armada-370-neta";
+};
+
 &pinctrl {
 	compatible = "marvell,mv88f6710-pinctrl";
 
diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts
index cded5f0..ef45cbe 100644
--- a/arch/arm/boot/dts/armada-375-db.dts
+++ b/arch/arm/boot/dts/armada-375-db.dts
@@ -58,7 +58,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x40000000>; /* 1 GB */
 	};
@@ -69,138 +69,141 @@
 			  MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000
 			  MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>;
 
-		internal-regs {
-			spi@10600 {
-				pinctrl-0 = <&spi0_pins>;
-				pinctrl-names = "default";
-				/*
-				 * SPI conflicts with NAND, so we disable it
-				 * here, and select NAND as the enabled device
-				 * by default.
-				 */
-				status = "disabled";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "n25q128a13", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <100000>;
-				pinctrl-0 = <&i2c0_pins>;
-				pinctrl-names = "default";
-			};
-
-			i2c@11100 {
-				status = "okay";
-				clock-frequency = <100000>;
-				pinctrl-0 = <&i2c1_pins>;
-				pinctrl-names = "default";
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			pinctrl {
-				sdio_st_pins: sdio-st-pins {
-					marvell,pins = "mpp44", "mpp45";
-					marvell,function = "gpio";
-				};
-			};
-
-			sata@a0000 {
-				status = "okay";
-				nr-ports = <2>;
-			};
-
-			nand: nand@d0000 {
-				pinctrl-0 = <&nand_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-
-				partition@0 {
-					label = "U-Boot";
-					reg = <0 0x800000>;
-				};
-				partition@800000 {
-					label = "Linux";
-					reg = <0x800000 0x800000>;
-				};
-				partition@1000000 {
-					label = "Filesystem";
-					reg = <0x1000000 0x3f000000>;
-				};
-			};
-
-			usb@54000 {
-				status = "okay";
-			};
-
-			usb3@58000 {
-				status = "okay";
-			};
-
-			mvsdio@d4000 {
-				pinctrl-0 = <&sdio_pins &sdio_st_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-				wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy3: ethernet-phy@3 {
-					reg = <3>;
-				};
-			};
-
-			ethernet@f0000 {
-				status = "okay";
-
-				eth0@c4000 {
-					status = "okay";
-					phy = <&phy0>;
-					phy-mode = "rgmii-id";
-				};
-
-				eth1@c5000 {
-					status = "okay";
-					phy = <&phy3>;
-					phy-mode = "gmii";
-				};
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-			/*
-			 * The two PCIe units are accessible through
-			 * standard PCIe slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
 	};
 };
+&pciec {
+	status = "okay";
+};
+
+/*
+ * The two PCIe units are accessible through
+ * standard PCIe slots on the board.
+ */
+&pcie0 {
+	/* Port 0, Lane 0 */
+	status = "okay";
+};
+
+&pcie1 {
+	/* Port 1, Lane 0 */
+	status = "okay";
+};
+
+
+&spi0 {
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+
+	/*
+	 * SPI conflicts with NAND, so we disable it here, and
+	 * select NAND as the enabled device by default.
+	 */
+
+	status = "disabled";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&pinctrl {
+	sdio_st_pins: sdio-st-pins {
+		marvell,pins = "mpp44", "mpp45";
+		marvell,function = "gpio";
+	};
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&nand {
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	num-cs = <1>;
+	marvell,nand-keep-config;
+	marvell,nand-enable-arbiter;
+	nand-on-flash-bbt;
+	nand-ecc-strength = <4>;
+	nand-ecc-step-size = <512>;
+
+	partition@0 {
+		label = "U-Boot";
+		reg = <0 0x800000>;
+	};
+	partition@800000 {
+		label = "Linux";
+		reg = <0x800000 0x800000>;
+	};
+	partition@1000000 {
+		label = "Filesystem";
+		reg = <0x1000000 0x3f000000>;
+	};
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&sdio {
+	pinctrl-0 = <&sdio_pins &sdio_st_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+	};
+};
+
+&ethernet {
+	status = "okay";
+};
+
+
+&eth0 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&eth1 {
+	status = "okay";
+	phy = <&phy3>;
+	phy-mode = "gmii";
+};
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index cc952cf..f515591e 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -45,7 +45,6 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/phy/phy.h>
@@ -53,6 +52,9 @@
 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	model = "Marvell Armada 375 family SoC";
 	compatible = "marvell,armada375";
 
@@ -65,7 +67,7 @@
 	};
 
 	clocks {
-		/* 2 GHz fixed main PLL */
+		/* 1 GHz fixed main PLL */
 		mainpll: mainpll {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
@@ -84,12 +86,12 @@
 		#size-cells = <0>;
 		enable-method = "marvell,armada-375-smp";
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
 		};
-		cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
@@ -115,7 +117,7 @@
 			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
 		};
 
-		devbus-bootcs {
+		devbus_bootcs: devbus-bootcs {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
@@ -125,7 +127,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs0 {
+		devbus_cs0: devbus-cs0 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
@@ -135,7 +137,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs1 {
+		devbus_cs1: devbus-cs1 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
@@ -145,7 +147,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs2 {
+		devbus_cs2: devbus-cs2 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
@@ -155,7 +157,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs3 {
+		devbus_cs3: devbus-cs3 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
@@ -182,12 +184,12 @@
 				prefetch-data = <1>;
 			};
 
-			scu@c000 {
+			scu: scu@c000 {
 				compatible = "arm,cortex-a9-scu";
 				reg = <0xc000 0x58>;
 			};
 
-			timer@c600 {
+			timer0: timer@c600 {
 				compatible = "arm,cortex-a9-twd-timer";
 				reg = <0xc600 0x20>;
 				interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
@@ -203,7 +205,7 @@
 				      <0xc100 0x100>;
 			};
 
-			mdio {
+			mdio: mdio@c0054 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "marvell,orion-mdio";
@@ -212,7 +214,7 @@
 			};
 
 			/* Network controller */
-			ethernet@f0000 {
+			ethernet: ethernet@f0000 {
 				compatible = "marvell,armada-375-pp2";
 				reg = <0xf0000 0xa000>, /* Packet Processor regs */
 				      <0xc0000 0x3060>, /* LMS regs */
@@ -222,20 +224,20 @@
 				clock-names = "pp_clk", "gop_clk";
 				status = "disabled";
 
-				eth0: eth0@c4000 {
+				eth0: eth0 {
 					interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 					port-id = <0>;
 					status = "disabled";
 				};
 
-				eth1: eth1@c5000 {
+				eth1: eth1 {
 					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 					port-id = <1>;
 					status = "disabled";
 				};
 			};
 
-			rtc@10300 {
+			rtc: rtc@10300 {
 				compatible = "marvell,orion-rtc";
 				reg = <0x10300 0x20>;
 				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
@@ -307,7 +309,7 @@
 				status = "disabled";
 			};
 
-			pinctrl {
+			pinctrl: pinctrl@18000 {
 				compatible = "marvell,mv88f6720-pinctrl";
 				reg = <0x18000 0x24>;
 
@@ -382,7 +384,7 @@
 				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			system-controller@18200 {
+			systemc: system-controller@18200 {
 				compatible = "marvell,armada-375-system-controller";
 				reg = <0x18200 0x100>;
 			};
@@ -415,7 +417,7 @@
 				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			timer@20300 {
+			timer1: timer@20300 {
 				compatible = "marvell,armada-375-timer", "marvell,armada-370-timer";
 				reg = <0x20300 0x30>, <0x21040 0x30>;
 				interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
@@ -428,24 +430,24 @@
 				clock-names = "nbclk", "fixed";
 			};
 
-			watchdog@20300 {
+			watchdog: watchdog@20300 {
 				compatible = "marvell,armada-375-wdt";
 				reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>;
 				clocks = <&coreclk 0>, <&refclk>;
 				clock-names = "nbclk", "fixed";
 			};
 
-			cpurst@20800 {
+			cpurst: cpurst@20800 {
 				compatible = "marvell,armada-370-cpu-reset";
 				reg = <0x20800 0x10>;
 			};
 
-			coherency-fabric@21010 {
+			coherencyfab: coherency-fabric@21010 {
 				compatible = "marvell,armada-375-coherency-fabric";
 				reg = <0x21010 0x1c>;
 			};
 
-			usb@50000 {
+			usb0: usb@50000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x50000 0x500>;
 				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
@@ -455,7 +457,7 @@
 				status = "disabled";
 			};
 
-			usb@54000 {
+			usb1: usb@54000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x54000 0x500>;
 				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
@@ -463,7 +465,7 @@
 				status = "disabled";
 			};
 
-			usb3@58000 {
+			usb2: usb3@58000 {
 				compatible = "marvell,armada-375-xhci";
 				reg = <0x58000 0x20000>,<0x5b880 0x80>;
 				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
@@ -473,7 +475,7 @@
 				status = "disabled";
 			};
 
-			xor@60800 {
+			xor0: xor@60800 {
 				compatible = "marvell,orion-xor";
 				reg = <0x60800 0x100
 				       0x60A00 0x100>;
@@ -493,7 +495,7 @@
 				};
 			};
 
-			xor@60900 {
+			xor1: xor@60900 {
 				compatible = "marvell,orion-xor";
 				reg = <0x60900 0x100
 				       0x60b00 0x100>;
@@ -513,7 +515,7 @@
 				};
 			};
 
-			crypto@90000 {
+			cesa: crypto@90000 {
 				compatible = "marvell,armada-375-crypto";
 				reg = <0x90000 0x10000>;
 				reg-names = "regs";
@@ -528,7 +530,7 @@
 				marvell,crypto-sram-size = <0x800>;
 			};
 
-			sata@a0000 {
+			sata: sata@a0000 {
 				compatible = "marvell,armada-370-sata";
 				reg = <0xa0000 0x5000>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -537,7 +539,7 @@
 				status = "disabled";
 			};
 
-			nand@d0000 {
+			nand: nand@d0000 {
 				compatible = "marvell,armada370-nand";
 				reg = <0xd0000 0x54>;
 				#address-cells = <1>;
@@ -547,7 +549,7 @@
 				status = "disabled";
 			};
 
-			mvsdio@d4000 {
+			sdio: mvsdio@d4000 {
 				compatible = "marvell,orion-sdio";
 				reg = <0xd4000 0x200>;
 				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
@@ -559,7 +561,7 @@
 				status = "disabled";
 			};
 
-			thermal@e8078 {
+			thermal: thermal@e8078 {
 				compatible = "marvell,armada375-thermal";
 				reg = <0xe8078 0x4>, <0xe807c 0x8>;
 				status = "okay";
@@ -580,7 +582,7 @@
 			};
 		};
 
-		pcie-controller {
+		pciec: pcie-controller@82000000 {
 			compatible = "marvell,armada-370-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -599,7 +601,7 @@
 				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1 MEM */
 				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1 IO  */>;
 
-			pcie@1,0 {
+			pcie0: pcie@1,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
 				reg = <0x0800 0 0 0 0>;
@@ -616,7 +618,7 @@
 				status = "disabled";
 			};
 
-			pcie@2,0 {
+			pcie1: pcie@2,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts
new file mode 100644
index 0000000..ab49acb
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -0,0 +1,340 @@
+/*
+ * Device Tree file for the Turris Omnia
+ *
+ * Copyright (C) 2016 Uwe Kleine-König <uwe@kleine-koenig.org>
+ * Copyright (C) 2016 Tomas Hlavacek <tmshlvkc@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2.  This program is licensed "as is" without
+ *     any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Schematic available at https://www.turris.cz/doc/_media/rtrom01-schema.pdf
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-385.dtsi"
+
+/ {
+	model = "Turris Omnia";
+	compatible = "cznic,turris-omnia", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1024 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+
+		internal-regs {
+
+			/* USB part of the PCIe2/USB 2.0 port */
+			usb@58000 {
+				status = "okay";
+			};
+
+			sata@a8000 {
+				status = "okay";
+			};
+
+			sdhci@d8000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&sdhci_pins>;
+				status = "okay";
+
+				bus-width = <8>;
+				no-1-8-v;
+				non-removable;
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				status = "okay";
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+
+			pcie@3,0 {
+				/* Port 2, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};
+
+/* Connected to 88E6176 switch, port 6 */
+&eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ge0_rgmii_pins>;
+	status = "okay";
+	phy-mode = "rgmii-id";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+/* Connected to 88E6176 switch, port 5 */
+&eth1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ge1_rgmii_pins>;
+	status = "okay";
+	phy-mode = "rgmii-id";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+/* WAN port */
+&eth2 {
+	status = "okay";
+	phy-mode = "sgmii";
+	phy = <&phy1>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+
+	i2cmux@70 {
+		compatible = "nxp,pca9547";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		status = "okay";
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			/* STM32F0 command interface at address 0x2a */
+			/* leds device (in STM32F0) at address 0x2b */
+
+			eeprom@54 {
+				compatible = "at,24c64";
+				reg = <0x54>;
+
+				/* The EEPROM contains data for bootloader.
+				 * Contents:
+				 * 	struct omnia_eeprom {
+				 * 		u32 magic; (=0x0341a034 in LE)
+				 *		u32 ramsize; (in GiB)
+				 * 		char regdomain[4];
+				 * 		u32 crc32;
+				 * 	};
+				 */
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			/* routed to PCIe0/mSATA connector (CN7A) */
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			/* routed to PCIe1/USB2 connector (CN61A) */
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			/* routed to PCIe2 connector (CN62A) */
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			/* routed to SFP+ */
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			/* ATSHA204A at address 0x64 */
+		};
+
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			/* exposed on pin header */
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			pcawan: gpio@71 {
+				/*
+				 * GPIO expander for SFP+ signals and
+				 * and phy irq
+				 */
+				compatible = "nxp,pca9538";
+				reg = <0x71>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&pcawan_pins>;
+
+				interrupt-parent = <&gpio1>;
+				interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	status = "okay";
+
+	phy1: phy@1 {
+		status = "okay";
+		compatible = "ethernet-phy-id0141.0DD1", "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+
+		/* irq is connected to &pcawan pin 7 */
+	};
+
+	/* Switch MV88E7176 at address 0x10 */
+};
+
+&pinctrl {
+	pcawan_pins: pcawan-pins {
+		marvell,pins = "mpp46";
+		marvell,function = "gpio";
+	};
+
+	spi0cs0_pins: spi0cs0-pins {
+		marvell,pins = "mpp25";
+		marvell,function = "spi0";
+	};
+
+	spi0cs1_pins: spi0cs1-pins {
+		marvell,pins = "mpp26";
+		marvell,function = "spi0";
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins &spi0cs0_pins>;
+	status = "okay";
+
+	spi-nor@0 {
+		compatible = "spansion,s25fl164k", "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0x00100000>;
+				label = "U-Boot";
+			};
+
+			partition@100000 {
+				reg = <0x00100000 0x00700000>;
+				label = "Rescue system";
+			};
+		};
+	};
+
+	/* MISO, MOSI, SCLK and CS1 are routed to pin header CN11 */
+};
+
+&uart0 {
+	/* Pin header CN10 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	/* Pin header CN11 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 2d76688..7450e9f 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -661,7 +661,7 @@
 	};
 
 	clocks {
-		/* 2 GHz fixed main PLL */
+		/* 1 GHz fixed main PLL */
 		mainpll: mainpll {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
index 34cba87..de171ba 100644
--- a/arch/arm/boot/dts/armada-39x.dtsi
+++ b/arch/arm/boot/dts/armada-39x.dtsi
@@ -573,7 +573,7 @@
 	};
 
 	clocks {
-		/* 2 GHz fixed main PLL */
+		/* 1 GHz fixed main PLL */
 		mainpll: mainpll {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
index ce15271..1e1fc4f 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -62,7 +62,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x00000000 0x00000000 0x40000000>; /* 1GB */
 	};
@@ -73,28 +73,6 @@
 			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
 			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
-		pcie-controller {
-			status = "okay";
-
-			/* First mini-PCIe port */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Second mini-PCIe port */
-			pcie@2,0 {
-				/* Port 0, Lane 1 */
-				status = "okay";
-			};
-
-			/* Renesas uPD720202 USB 3.0 controller */
-			pcie@3,0 {
-				/* Port 0, Lane 3 */
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 			/* UART0 */
 			serial@12000 {
@@ -111,16 +89,6 @@
 				status = "okay";
 			};
 
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
 			ethernet@70000 {
 				pinctrl-0 = <&ge0_rgmii_pins>;
 				pinctrl-names = "default";
@@ -145,7 +113,7 @@
 		pinctrl-0 = <&keys_pin>;
 		pinctrl-names = "default";
 
-		button@1 {
+		reset {
 			label = "Factory Reset Button";
 			linux,code = <KEY_SETUP>;
 			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
@@ -153,6 +121,38 @@
 	};
 };
 
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* First mini-PCIe port */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Second mini-PCIe port */
+	pcie@2,0 {
+		/* Port 0, Lane 1 */
+		status = "okay";
+	};
+
+	/* Renesas uPD720202 USB 3.0 controller */
+	pcie@3,0 {
+		/* Port 0, Lane 3 */
+		status = "okay";
+	};
+};
+
 &pinctrl {
 	pinctrl-0 = <&phy_int_pin>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index 075120b..44a724d 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -67,7 +67,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0 0x00000000 0 0x80000000>; /* 2 GB */
 	};
@@ -108,39 +108,6 @@
 			};
 		};
 
-		pcie-controller {
-			status = "okay";
-
-			/*
-			 * All 6 slots are physically present as
-			 * standard PCIe slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-			pcie@2,0 {
-				/* Port 0, Lane 1 */
-				status = "okay";
-			};
-			pcie@3,0 {
-				/* Port 0, Lane 2 */
-				status = "okay";
-			};
-			pcie@4,0 {
-				/* Port 0, Lane 3 */
-				status = "okay";
-			};
-			pcie@9,0 {
-				/* Port 2, Lane 0 */
-				status = "okay";
-			};
-			pcie@10,0 {
-				/* Port 3, Lane 0 */
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 			serial@12000 {
 				status = "okay";
@@ -160,24 +127,6 @@
 				status = "okay";
 			};
 
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-
-				phy2: ethernet-phy@2 {
-					reg = <25>;
-				};
-
-				phy3: ethernet-phy@3 {
-					reg = <27>;
-				};
-			};
-
 			ethernet@70000 {
 				status = "okay";
 				phy = <&phy0>;
@@ -266,6 +215,57 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+
+	/*
+	 * All 6 slots are physically present as
+	 * standard PCIe slots on the board.
+	 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+	pcie@2,0 {
+		/* Port 0, Lane 1 */
+		status = "okay";
+	};
+	pcie@3,0 {
+		/* Port 0, Lane 2 */
+		status = "okay";
+	};
+	pcie@4,0 {
+		/* Port 0, Lane 3 */
+		status = "okay";
+	};
+	pcie@9,0 {
+		/* Port 2, Lane 0 */
+		status = "okay";
+	};
+	pcie@10,0 {
+		/* Port 3, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	phy2: ethernet-phy@2 {
+		reg = <25>;
+	};
+
+	phy3: ethernet-phy@3 {
+		reg = <27>;
+	};
+};
+
 &spi0 {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 190e4ec..72cb8fa 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -68,7 +68,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		/*
                  * 8 GB of plug-in RAM modules by default.The amount
@@ -127,27 +127,6 @@
 			};
 		};
 
-		pcie-controller {
-			status = "okay";
-
-			/*
-			 * The 3 slots are physically present as
-			 * standard PCIe slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-			pcie@9,0 {
-				/* Port 2, Lane 0 */
-				status = "okay";
-			};
-			pcie@10,0 {
-				/* Port 3, Lane 0 */
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 			serial@12000 {
 				status = "okay";
@@ -175,24 +154,6 @@
 				status = "okay";
 			};
 
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <16>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <17>;
-				};
-
-				phy2: ethernet-phy@2 {
-					reg = <18>;
-				};
-
-				phy3: ethernet-phy@3 {
-					reg = <19>;
-				};
-			};
-
 			ethernet@70000 {
 				status = "okay";
 				phy = <&phy0>;
@@ -251,6 +212,45 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+
+	/*
+	 * The 3 slots are physically present as
+	 * standard PCIe slots on the board.
+	 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+	pcie@9,0 {
+		/* Port 2, Lane 0 */
+		status = "okay";
+	};
+	pcie@10,0 {
+		/* Port 3, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <16>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <17>;
+	};
+
+	phy2: ethernet-phy@2 {
+		reg = <18>;
+	};
+
+	phy3: ethernet-phy@3 {
+		reg = <19>;
+	};
+};
+
 &spi0 {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
index 8af463f..d848ae9 100644
--- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
+++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
@@ -57,7 +57,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0 0x00000000 0 0x20000000>; /* 512MB */
 	};
@@ -68,37 +68,11 @@
 			MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
 			MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
-		pcie-controller {
-			status = "okay";
-
-			/* Quad port sata: Marvell 88SX7042 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* USB 3.0 xHCI controller: NEC D720200F1 */
-			pcie@5,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 			serial@12000 {
 				status = "okay";
 			};
 
-			mdio {
-				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
-					reg = <1>;
-				};
-			};
-
 			ethernet@70000 {
 				pinctrl-0 = <&ge0_rgmii_pins>;
 				pinctrl-names = "default";
@@ -295,6 +269,31 @@
 		gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
 	};
 };
+&pciec {
+	status = "okay";
+
+	/* Quad port sata: Marvell 88SX7042 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* USB 3.0 xHCI controller: NEC D720200F1 */
+	pcie@5,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+		reg = <1>;
+	};
+};
 
 &pinctrl {
 	poweroff_pin: poweroff-pin {
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index 076f27f..83ac884 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -62,7 +62,7 @@
 		stdout-path = &uart0;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x00000000 0x00000000 0x10000000>; /* 256MB */
 	};
@@ -73,28 +73,6 @@
 			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
 			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
-		pcie-controller {
-			status = "okay";
-
-			/* Etron EJ168 USB 3.0 controller */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* First mini-PCIe port */
-			pcie@2,0 {
-				/* Port 0, Lane 1 */
-				status = "okay";
-			};
-
-			/* Second mini-PCIe port */
-			pcie@3,0 {
-				/* Port 0, Lane 3 */
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 
 			rtc@10300 {
@@ -289,13 +267,13 @@
 		pinctrl-0 = <&keys_pin>;
 		pinctrl-names = "default";
 
-		button@1 {
+		wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
 		};
 
-		button@2 {
+		reset {
 			label = "Factory Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
@@ -323,7 +301,7 @@
 				      4500 1>;
 	};
 
-	dsa@0 {
+	dsa {
 		compatible = "marvell,dsa";
 		#address-cells = <2>;
 		#size-cells = <0>;
@@ -369,6 +347,28 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+
+	/* Etron EJ168 USB 3.0 controller */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* First mini-PCIe port */
+	pcie@2,0 {
+		/* Port 0, Lane 1 */
+		status = "okay";
+	};
+
+	/* Second mini-PCIe port */
+	pcie@3,0 {
+		/* Port 0, Lane 3 */
+		status = "okay";
+	};
+};
+
 &pinctrl {
 
 	keys_pin: keys-pin {
diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts
index 6522b04..1627738 100644
--- a/arch/arm/boot/dts/armada-xp-matrix.dts
+++ b/arch/arm/boot/dts/armada-xp-matrix.dts
@@ -55,7 +55,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		/*
 		 * This board has 4 GB of RAM, but the last 256 MB of
@@ -99,18 +99,18 @@
 				};
 			};
 
-			pcie-controller {
-				status = "okay";
-
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-			};
-
 			usb@50000 {
 				status = "okay";
 			};
 		};
 	};
 };
+
+&pciec {
+	status = "okay";
+
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 6e6d0f0..05c164b 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -86,7 +86,7 @@
 		 * configured as x4 or quad x1 lanes. One unit is
 		 * x1 only.
 		 */
-		pcie-controller {
+		pciec: pcie-controller@82000000 {
 			compatible = "marvell,armada-xp-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -114,7 +114,7 @@
 				0x82000000 0x5 0       MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
 				0x81000000 0x5 0       MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */>;
 
-			pcie@1,0 {
+			pcie1: pcie@1,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
 				reg = <0x0800 0 0 0 0>;
@@ -131,7 +131,7 @@
 				status = "disabled";
 			};
 
-			pcie@2,0 {
+			pcie2: pcie@2,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
@@ -148,7 +148,7 @@
 				status = "disabled";
 			};
 
-			pcie@3,0 {
+			pcie3: pcie@3,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
@@ -165,7 +165,7 @@
 				status = "disabled";
 			};
 
-			pcie@4,0 {
+			pcie4: pcie@4,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
@@ -182,7 +182,7 @@
 				status = "disabled";
 			};
 
-			pcie@5,0 {
+			pcie5: pcie@5,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index c5fdc99..07894b0 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -87,7 +87,7 @@
 		 * configured as x4 or quad x1 lanes. One unit is
 		 * x4 only.
 		 */
-		pcie-controller {
+		pciec: pcie-controller@82000000 {
 			compatible = "marvell,armada-xp-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -129,7 +129,7 @@
 				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
 				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
 
-			pcie@1,0 {
+			pcie1: pcie@1,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
 				reg = <0x0800 0 0 0 0>;
@@ -146,7 +146,7 @@
 				status = "disabled";
 			};
 
-			pcie@2,0 {
+			pcie2: pcie@2,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
@@ -163,7 +163,7 @@
 				status = "disabled";
 			};
 
-			pcie@3,0 {
+			pcie3: pcie@3,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
@@ -180,7 +180,7 @@
 				status = "disabled";
 			};
 
-			pcie@4,0 {
+			pcie4: pcie@4,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
@@ -197,7 +197,7 @@
 				status = "disabled";
 			};
 
-			pcie@5,0 {
+			pcie5: pcie@5,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
@@ -214,7 +214,7 @@
 				status = "disabled";
 			};
 
-			pcie@6,0 {
+			pcie6: pcie@6,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
 				reg = <0x3000 0 0 0 0>;
@@ -231,7 +231,7 @@
 				status = "disabled";
 			};
 
-			pcie@7,0 {
+			pcie7: pcie@7,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
 				reg = <0x3800 0 0 0 0>;
@@ -248,7 +248,7 @@
 				status = "disabled";
 			};
 
-			pcie@8,0 {
+			pcie8: pcie@8,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
 				reg = <0x4000 0 0 0 0>;
@@ -265,7 +265,7 @@
 				status = "disabled";
 			};
 
-			pcie@9,0 {
+			pcie9: pcie@9,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
 				reg = <0x4800 0 0 0 0>;
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index 0e24f1a..775bee5 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -104,7 +104,7 @@
 		 * configured as x4 or quad x1 lanes. Two units are
 		 * x4/x1.
 		 */
-		pcie-controller {
+		pciec: pcie-controller@82000000 {
 			compatible = "marvell,armada-xp-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -150,7 +150,7 @@
 				0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
 				0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
 
-			pcie@1,0 {
+			pcie1: pcie@1,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
 				reg = <0x0800 0 0 0 0>;
@@ -167,7 +167,7 @@
 				status = "disabled";
 			};
 
-			pcie@2,0 {
+			pcie2: pcie@2,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
@@ -184,7 +184,7 @@
 				status = "disabled";
 			};
 
-			pcie@3,0 {
+			pcie3: pcie@3,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
@@ -201,7 +201,7 @@
 				status = "disabled";
 			};
 
-			pcie@4,0 {
+			pcie4: pcie@4,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
@@ -218,7 +218,7 @@
 				status = "disabled";
 			};
 
-			pcie@5,0 {
+			pcie5: pcie@5,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
@@ -235,7 +235,7 @@
 				status = "disabled";
 			};
 
-			pcie@6,0 {
+			pcie6: pcie@6,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
 				reg = <0x3000 0 0 0 0>;
@@ -252,7 +252,7 @@
 				status = "disabled";
 			};
 
-			pcie@7,0 {
+			pcie7: pcie@7,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
 				reg = <0x3800 0 0 0 0>;
@@ -269,7 +269,7 @@
 				status = "disabled";
 			};
 
-			pcie@8,0 {
+			pcie8: pcie@8,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
 				reg = <0x4000 0 0 0 0>;
@@ -286,7 +286,7 @@
 				status = "disabled";
 			};
 
-			pcie@9,0 {
+			pcie9: pcie@9,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
 				reg = <0x4800 0 0 0 0>;
@@ -303,7 +303,7 @@
 				status = "disabled";
 			};
 
-			pcie@10,0 {
+			pcie10: pcie@10,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
 				reg = <0x5000 0 0 0 0>;
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
index d19f44c..a2f0e78 100644
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -56,7 +56,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0 0x00000000 0 0x80000000>; /* 2GB */
 	};
@@ -67,28 +67,6 @@
 			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
 			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
-		pcie-controller {
-			status = "okay";
-
-			/* Connected to first Marvell 88SE9170 SATA controller */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Connected to second Marvell 88SE9170 SATA controller */
-			pcie@2,0 {
-				/* Port 0, Lane 1 */
-				status = "okay";
-			};
-
-			/* Connected to Fresco Logic FL1009 USB 3.0 controller */
-			pcie@5,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 
 			/* RTC is provided by Intersil ISL12057 I2C RTC chip */
@@ -97,7 +75,6 @@
 			};
 
 			i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
 				clock-frequency = <400000>;
 				status = "okay";
 
@@ -154,23 +131,19 @@
 				status = "okay";
 			};
 
-			mdio {
-				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
-					reg = <1>;
-				};
-			};
-
 			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+
 				status = "okay";
 				phy = <&phy0>;
 				phy-mode = "rgmii-id";
 			};
 
 			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+
 				status = "okay";
 				phy = <&phy1>;
 				phy-mode = "rgmii-id";
@@ -295,6 +268,39 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+
+	/* Connected to first Marvell 88SE9170 SATA controller */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Connected to second Marvell 88SE9170 SATA controller */
+	pcie@2,0 {
+		/* Port 0, Lane 1 */
+		status = "okay";
+	};
+
+	/* Connected to Fresco Logic FL1009 USB 3.0 controller */
+	pcie@5,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+		reg = <1>;
+	};
+};
+
+
 &pinctrl {
 	poweroff: poweroff {
 		marvell,pins = "mpp42";
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index ed3b889d..b577c9f 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -57,7 +57,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0 0x00000000 0 0x40000000>; /* 1 GB soldered on */
 	};
@@ -98,15 +98,6 @@
 			};
 		};
 
-		pcie-controller {
-			status = "okay";
-			/* Internal mini-PCIe connector */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 			rtc@10300 {
 				/* No crystal connected to the internal RTC */
@@ -148,31 +139,13 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				button@1 {
+				init {
 					label = "Init Button";
 					linux,code = <KEY_POWER>;
 					gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-
-				phy2: ethernet-phy@2 {
-					reg = <2>;
-				};
-
-				phy3: ethernet-phy@3 {
-					reg = <3>;
-				};
-			};
-
 			ethernet@70000 {
 				status = "okay";
 				phy = <&phy0>;
@@ -240,6 +213,33 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+	/* Internal mini-PCIe connector */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	phy2: ethernet-phy@2 {
+		reg = <2>;
+	};
+
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+	};
+};
+
 &pinctrl {
 	led_pins: led-pins-0 {
 		marvell,pins = "mpp49", "mpp51", "mpp53";
diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
index ae28673..e803da0 100644
--- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts
+++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
@@ -70,7 +70,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0 0x00000000 0 0x40000000>; /* 1GB */
 	};
@@ -81,28 +81,6 @@
 			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
 			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
-		pcie-controller {
-			status = "okay";
-
-			/*
-			 * Connected to Marvell 88SX7042 SATA-II controller
-			 * handling the four disks.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/*
-			 * Connected to EtronTech EJ168A XHCI controller
-			 * providing the two rear USB 3.0 ports.
-			 */
-			pcie@5,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 
 			/* RTC is provided by Seiko S-35390A below */
@@ -150,16 +128,6 @@
 				status = "okay";
 			};
 
-			mdio {
-				phy0: ethernet-phy@0 { /* Marvell 88E1512 */
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 { /* Marvell 88E1512 */
-					reg = <1>;
-				};
-			};
-
 			ethernet@70000 {
 				status = "okay";
 				pinctrl-0 = <&ge0_rgmii_pins>;
@@ -186,7 +154,7 @@
 			     &sata3_pwr_pin &sata4_pwr_pin>;
 		pinctrl-names = "default";
 
-		sata1_regulator: sata1-regulator {
+		sata1_regulator: sata1-regulator@1 {
 			compatible = "regulator-fixed";
 			reg = <1>;
 			regulator-name = "SATA1 Power";
@@ -199,7 +167,7 @@
 			gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		sata2_regulator: sata2-regulator {
+		sata2_regulator: sata2-regulator@2 {
 			compatible = "regulator-fixed";
 			reg = <2>;
 			regulator-name = "SATA2 Power";
@@ -212,7 +180,7 @@
 			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 		};
 
-		sata3_regulator: sata3-regulator {
+		sata3_regulator: sata3-regulator@3 {
 			compatible = "regulator-fixed";
 			reg = <3>;
 			regulator-name = "SATA3 Power";
@@ -225,7 +193,7 @@
 			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 		};
 
-		sata4_regulator: sata4-regulator {
+		sata4_regulator: sata4-regulator@4 {
 			compatible = "regulator-fixed";
 			reg = <4>;
 			regulator-name = "SATA4 Power";
@@ -240,6 +208,39 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+
+	/*
+	 * Connected to Marvell 88SX7042 SATA-II controller
+	 * handling the four disks.
+	 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/*
+	 * Connected to EtronTech EJ168A XHCI controller
+	 * providing the two rear USB 3.0 ports.
+	 */
+	pcie@5,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+
+&mdio {
+	phy0: ethernet-phy@0 { /* Marvell 88E1512 */
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 { /* Marvell 88E1512 */
+		reg = <1>;
+	};
+};
+
 &pinctrl {
 	sata1_pwr_pin: sata1-pwr-pin {
 		marvell,pins = "mpp42";
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 4a5f99e..5274e4f 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -53,6 +53,9 @@
 #include "armada-370-xp.dtsi"
 
 / {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
 	model = "Marvell Armada XP family SoC";
 	compatible = "marvell,armadaxp", "marvell,armada-370-xp";
 
@@ -75,7 +78,7 @@
 				reg = <0x1400 0x500>;
 			};
 
-			L2: l2-cache {
+			L2: l2-cache@8000 {
 				compatible = "marvell,aurora-system-cache";
 				reg = <0x08000 0x1000>;
 				cache-id-part = <0x100>;
@@ -84,16 +87,6 @@
 				wt-override;
 			};
 
-			i2c0: i2c@11000 {
-				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
-				reg = <0x11000 0x100>;
-			};
-
-			i2c1: i2c@11100 {
-				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
-				reg = <0x11100 0x100>;
-			};
-
 			uart2: serial@12200 {
 				compatible = "snps,dw-apb-uart";
 				pinctrl-0 = <&uart2_pins>;
@@ -118,7 +111,7 @@
 				status = "disabled";
 			};
 
-			system-controller@18200 {
+			systemc: system-controller@18200 {
 				compatible = "marvell,armada-370-xp-system-controller";
 				reg = <0x18200 0x500>;
 			};
@@ -136,7 +129,7 @@
 				#clock-cells = <1>;
 			};
 
-			thermal@182b0 {
+			thermal: thermal@182b0 {
 				compatible = "marvell,armadaxp-thermal";
 				reg = <0x182b0 0x4
 					0x184d0 0x4>;
@@ -150,27 +143,6 @@
 				clocks = <&coreclk 1>;
 			};
 
-			interrupt-controller@20a00 {
-			      reg = <0x20a00 0x2d0>, <0x21070 0x58>;
-			};
-
-			timer@20300 {
-				compatible = "marvell,armada-xp-timer";
-				clocks = <&coreclk 2>, <&refclk>;
-				clock-names = "nbclk", "fixed";
-			};
-
-			watchdog@20300 {
-				compatible = "marvell,armada-xp-wdt";
-				clocks = <&coreclk 2>, <&refclk>;
-				clock-names = "nbclk", "fixed";
-			};
-
-			cpurst@20800 {
-				compatible = "marvell,armada-370-cpu-reset";
-				reg = <0x20800 0x20>;
-			};
-
 			cpu-config@21000 {
 				compatible = "marvell,armada-xp-cpu-config";
 				reg = <0x21000 0x8>;
@@ -184,15 +156,7 @@
 				status = "disabled";
 			};
 
-			usb@50000 {
-				clocks = <&gateclk 18>;
-			};
-
-			usb@51000 {
-				clocks = <&gateclk 19>;
-			};
-
-			usb@52000 {
+			usb2: usb@52000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x52000 0x500>;
 				interrupts = <47>;
@@ -200,7 +164,7 @@
 				status = "disabled";
 			};
 
-			xor@60900 {
+			xor1: xor@60900 {
 				compatible = "marvell,orion-xor";
 				reg = <0x60900 0x100
 				       0x60b00 0x100>;
@@ -228,7 +192,7 @@
 				compatible = "marvell,armada-xp-neta";
 			};
 
-			crypto@90000 {
+			cesa: crypto@90000 {
 				compatible = "marvell,armada-xp-crypto";
 				reg = <0x90000 0x10000>;
 				reg-names = "regs";
@@ -248,7 +212,7 @@
 				status = "disabled";
 			};
 
-			xor@f0900 {
+			xor0: xor@f0900 {
 				compatible = "marvell,orion-xor";
 				reg = <0xF0900 0x100
 				       0xF0B00 0x100>;
@@ -309,6 +273,44 @@
 	};
 };
 
+&i2c0 {
+	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+	reg = <0x11000 0x100>;
+};
+
+&i2c1 {
+	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+	reg = <0x11100 0x100>;
+};
+
+&mpic {
+	reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+};
+
+&timer {
+	compatible = "marvell,armada-xp-timer";
+	clocks = <&coreclk 2>, <&refclk>;
+	clock-names = "nbclk", "fixed";
+};
+
+&watchdog {
+	compatible = "marvell,armada-xp-wdt";
+	clocks = <&coreclk 2>, <&refclk>;
+	clock-names = "nbclk", "fixed";
+};
+
+&cpurst {
+	reg = <0x20800 0x20>;
+};
+
+&usb0 {
+	clocks = <&gateclk 18>;
+};
+
+&usb1 {
+	clocks = <&gateclk 19>;
+};
+
 &pinctrl {
 	ge0_gmii_pins: ge0-gmii-pins {
 		marvell,pins =
diff --git a/arch/arm/boot/dts/artpec6-devboard.dts b/arch/arm/boot/dts/artpec6-devboard.dts
index f823ed3..9dfe845 100644
--- a/arch/arm/boot/dts/artpec6-devboard.dts
+++ b/arch/arm/boot/dts/artpec6-devboard.dts
@@ -46,6 +46,10 @@
 	status = "okay";
 };
 
+&pcie {
+	status = "okay";
+};
+
 &ethernet {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi
index 3489019c..767cbe8 100644
--- a/arch/arm/boot/dts/artpec6.dtsi
+++ b/arch/arm/boot/dts/artpec6.dtsi
@@ -67,7 +67,7 @@
 		};
 	};
 
-	syscon {
+	syscon: syscon@f8000000 {
 		compatible = "axis,artpec6-syscon", "syscon";
 		reg = <0xf8000000 0x48>;
 	};
@@ -154,6 +154,33 @@
 		interrupt-parent = <&intc>;
 	};
 
+	pcie: pcie@f8050000 {
+		compatible = "axis,artpec6-pcie", "snps,dw-pcie";
+		reg = <0xf8050000 0x2000
+		       0xf8040000 0x1000
+		       0xc0000000 0x2000>;
+		reg-names = "dbi", "phy", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+			  /* downstream I/O */
+		ranges = <0x81000000 0 0 0xc0002000 0 0x00010000
+			  /* non-prefetchable memory */
+			  0x82000000 0 0xc0012000 0xc0012000 0 0x1ffee000>;
+		num-lanes = <2>;
+		bus-range = <0x00 0xff>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0x7>;
+		interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		axis,syscon-pcie = <&syscon>;
+		status = "disabled";
+	};
+
 	amba@0 {
 		compatible = "simple-bus";
 		#address-cells = <0x1>;
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
index a92c6e0..b5a5a91 100644
--- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
@@ -12,8 +12,8 @@
 #include "sama5d4.dtsi"
 
 / {
-	model = "DENX MA5D4";
-	compatible = "denx,ma5d4", "atmel,sama5d4", "atmel,sama5";
+	model = "Aries/DENX MA5D4";
+	compatible = "aries,ma5d4", "denx,ma5d4", "atmel,sama5d4", "atmel,sama5";
 
 	memory {
 		reg = <0x20000000 0x10000000>;
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
index eac4ea2..84be29f 100644
--- a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
@@ -13,8 +13,8 @@
 #include "at91-sama5d4_ma5d4.dtsi"
 
 / {
-	model = "DENX MA5D4EVK";
-	compatible = "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5";
+	model = "Aries/DENX MA5D4EVK";
+	compatible = "aries,ma5d4evk", "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5";
 
 	chosen {
 		stdout-path = "serial3:115200n8";
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index 4e913c2..f057e0b 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -481,8 +481,8 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA30 periph A */
-							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA31 periph with pullup */
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index a3e363d..9e035b2 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -412,8 +412,8 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A */
-							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PB15 periph with pullup */
+							<AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 
diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts
index 2c87f58..b2578fe 100644
--- a/arch/arm/boot/dts/at91sam9260ek.dts
+++ b/arch/arm/boot/dts/at91sam9260ek.dts
@@ -174,14 +174,14 @@
 			label = "Button 3";
 			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
 			linux,code = <0x103>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		btn4 {
 			label = "Button 4";
 			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
 			linux,code = <0x104>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index 32752d7..3fe77c3 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -302,8 +302,8 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOA 9  AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+							<AT91_PIOA 9  AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index aeb1a36..a1888f6 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -412,8 +412,8 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC30 periph A */
-							 AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC31 periph with pullup */
+							<AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index b3501ae..e567d5f 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -478,8 +478,8 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A */
-							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB13 periph A */
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 3b3eb3e..f43d769 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -500,8 +500,8 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA9 periph A */
-							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA10 periph with pullup */
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index 70adf94..f4c129a 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -438,8 +438,8 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index ed4e4bd..f66bae9 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -460,8 +460,8 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA9 periph A */
-							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA10 periph A with pullup */
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index fabc9f3..8833a4c 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -91,6 +91,13 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
+		otp: otp@0301c800 {
+			compatible = "brcm,ocotp";
+			reg = <0x0301c800 0x2c>;
+			brcm,ocotp-size = <2048>;
+			status = "disabled";
+		};
+
 		pcie_phy: phy@0301d0a0 {
 			compatible = "brcm,cygnus-pcie-phy";
 			reg = <0x0301d0a0 0x14>;
@@ -108,12 +115,21 @@
 			};
 		};
 
-		pinctrl: pinctrl@0x0301d0c8 {
+		pinctrl: pinctrl@0301d0c8 {
 			compatible = "brcm,cygnus-pinmux";
 			reg = <0x0301d0c8 0x30>,
 			      <0x0301d24c 0x2c>;
 		};
 
+		mailbox: mailbox@03024024 {
+			compatible = "brcm,iproc-mailbox";
+			reg = <0x03024024 0x40>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			#mbox-cells = <1>;
+		};
+
 		gpio_crmu: gpio@03024800 {
 			compatible = "brcm,cygnus-crmu-gpio";
 			reg = <0x03024800 0x50>,
@@ -121,6 +137,9 @@
 			ngpios = <6>;
 			#gpio-cells = <2>;
 			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&mailbox>;
+			interrupts = <0>;
 		};
 
 		i2c0: i2c@18008000 {
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 7c9e0fa..b6142bd 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -160,7 +160,7 @@
 
 	axi {
 		compatible = "simple-bus";
-		ranges = <0x00000000 0x18000000 0x0011ba08>;
+		ranges = <0x00000000 0x18000000 0x0011c40a>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
@@ -241,6 +241,16 @@
 			brcm,nand-has-wp;
 		};
 
+		gpiob: gpio@30000 {
+			compatible = "brcm,iproc-nsp-gpio", "brcm,iproc-gpio";
+			reg = <0x30000 0x50>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			ngpios = <4>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		pwm: pwm@31000 {
 			compatible = "brcm,iproc-pwm";
 			reg = <0x31000 0x28>;
@@ -254,6 +264,35 @@
 			reg = <0x33000 0x14>;
 		};
 
+		qspi: qspi@27200 {
+			compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
+			reg = <0x027200 0x184>,
+			      <0x027000 0x124>,
+			      <0x11c408 0x004>,
+			      <0x0273a0 0x01c>;
+			reg-names = "mspi", "bspi", "intr_regs",
+				    "intr_status_reg";
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "spi_lr_fullness_reached",
+					  "spi_lr_session_aborted",
+					  "spi_lr_impatient",
+					  "spi_lr_session_done",
+					  "spi_lr_overhead",
+					  "mspi_done",
+					  "mspi_halted";
+			clocks = <&iprocmed>;
+			clock-names = "iprocmed";
+			num-cs = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		ccbtimer0: timer@34000 {
 			compatible = "arm,sp804";
 			reg = <0x34000 0x1000>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
index f7f9db3..d070454 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -22,7 +22,72 @@
 };
 
 &gpio {
-	pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>;
+	/*
+	 * This is based on the unreleased schematic for the Model A+.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "SDA0",
+			  "SCL0",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "NC", /* GPIO30 */
+			  "NC", /* GPIO31 */
+			  "CAM_GPIO1", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "PWR_LOW_N", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "USB_LIMIT", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "PWM0_OUT", /* GPIO40 */
+			  "CAM_GPIO0", /* GPIO41 */
+			  "NC", /* GPIO42 */
+			  "NC", /* GPIO43 */
+			  "NC", /* GPIO44 */
+			  "PWM1_OUT", /* GPIO45 */
+			  "HDMI_HPD_N",
+			  "STATUS_LED",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
 
 	/* I2S interface */
 	i2s_alt0: i2s_alt0 {
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts
index 8be102f..46d078e 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts
@@ -15,7 +15,74 @@
 };
 
 &gpio {
-	pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>;
+	/*
+	 * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf
+	 * RPI00021 sheet 02
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "SDA0",
+			  "SCL0",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "CAM_GPIO1",
+			  "LAN_RUN",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "NC", /* GPIO12 */
+			  "NC", /* GPIO13 */
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "STATUS_LED_N",
+			  "GPIO17",
+			  "GPIO18",
+			  "NC", /* GPIO19 */
+			  "NC", /* GPIO20 */
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "NC", /* GPIO26 */
+			  "CAM_GPIO0",
+			  /* Binary number representing build/revision */
+			  "CONFIG0",
+			  "CONFIG1",
+			  "CONFIG2",
+			  "CONFIG3",
+			  "NC", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "NC", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "NC", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "PWM0_OUT",
+			  "NC", /* GPIO41 */
+			  "NC", /* GPIO42 */
+			  "NC", /* GPIO43 */
+			  "NC", /* GPIO44 */
+			  "PWM1_OUT",
+			  "HDMI_HPD_P",
+			  "SD_CARD_DET",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt2>;
 
 	/* I2S interface */
 	i2s_alt2: i2s_alt2 {
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
index 35cde65..432088e 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -23,7 +23,73 @@
 };
 
 &gpio {
-	pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>;
+	/*
+	 * Taken from Raspberry-Pi-B-Plus-V1.2-Schematics.pdf
+	 * RPI-BPLUS sheet 1
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "SDA0",
+			  "SCL0",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "NC", /* GPIO30 */
+			  "LAN_RUN", /* GPIO31 */
+			  "CAM_GPIO1", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "PWR_LOW_N", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "USB_LIMIT", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "PWM0_OUT", /* GPIO40 */
+			  "CAM_GPIO0", /* GPIO41 */
+			  "NC", /* GPIO42 */
+			  "NC", /* GPIO43 */
+			  "ETHCLK", /* GPIO44 */
+			  "PWM1_OUT", /* GPIO45 */
+			  "HDMI_HPD_N",
+			  "STATUS_LED",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
 
 	/* I2S interface */
 	i2s_alt0: i2s_alt0 {
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
index 84df85e..4133bc2 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
@@ -16,7 +16,73 @@
 };
 
 &gpio {
-	pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>;
+	/*
+	 * Taken from Raspberry-Pi-Rev-2.0-Model-AB-Schematics.pdf
+	 * RPI00022 sheet 02
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "SDA0",
+			  "SCL0",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "CAM_CLK",
+			  "LAN_RUN",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "NC", /* GPIO12 */
+			  "NC", /* GPIO13 */
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "STATUS_LED_N",
+			  "GPIO17",
+			  "GPIO18",
+			  "NC", /* GPIO19 */
+			  "NC", /* GPIO20 */
+			  "CAM_GPIO",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "NC", /* GPIO26 */
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
+			  "NC", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "NC", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "NC", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "PWM0_OUT",
+			  "NC", /* GPIO41 */
+			  "NC", /* GPIO42 */
+			  "NC", /* GPIO43 */
+			  "NC", /* GPIO44 */
+			  "PWM1_OUT",
+			  "HDMI_HPD_P",
+			  "SD_CARD_DET",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt2>;
 
 	/* I2S interface */
 	i2s_alt2: i2s_alt2 {
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index 8e626a8..4d56fe3 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -16,7 +16,74 @@
 };
 
 &gpio {
-	pinctrl-0 = <&gpioout &alt0 &alt3>;
+	/*
+	 * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf
+	 * RPI00021 sheet 02
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "SDA0",
+			  "SCL0",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "CAM_GPIO1",
+			  "LAN_RUN",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "NC", /* GPIO12 */
+			  "NC", /* GPIO13 */
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "STATUS_LED_N",
+			  "GPIO17",
+			  "GPIO18",
+			  "NC", /* GPIO19 */
+			  "NC", /* GPIO20 */
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "NC", /* GPIO26 */
+			  "CAM_GPIO0",
+			  /* Binary number representing build/revision */
+			  "CONFIG0",
+			  "CONFIG1",
+			  "CONFIG2",
+			  "CONFIG3",
+			  "NC", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "NC", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "NC", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "PWM0_OUT",
+			  "NC", /* GPIO41 */
+			  "NC", /* GPIO42 */
+			  "NC", /* GPIO43 */
+			  "NC", /* GPIO44 */
+			  "PWM1_OUT",
+			  "HDMI_HPD_P",
+			  "SD_CARD_DET",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0>;
 };
 
 &hdmi {
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
index 60e359f..cc8b832 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
@@ -26,7 +26,72 @@
 };
 
 &gpio {
-	pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>;
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "SDA0",
+			  "SCL0",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "NC", /* GPIO30 */
+			  "NC", /* GPIO31 */
+			  "CAM_GPIO1", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "NC", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "NC", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "NC", /* GPIO40 */
+			  "CAM_GPIO0", /* GPIO41 */
+			  "NC", /* GPIO42 */
+			  "NC", /* GPIO43 */
+			  "NC", /* GPIO44 */
+			  "NC", /* GPIO45 */
+			  "HDMI_HPD_N",
+			  "STATUS_LED_N",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
 
 	/* I2S interface */
 	i2s_alt0: i2s_alt0 {
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index e9b47b2..6ddf7df 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -39,22 +39,21 @@
 	};
 
 	alt0: alt0 {
-		brcm,pins = <0 1 2 3 4 5 7 8 9 10 11 14 15 40 45>;
+		brcm,pins = <4 5 7 8 9 10 11 14 15>;
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
-
-	alt3: alt3 {
-		brcm,pins = <48 49 50 51 52 53>;
-		brcm,function = <BCM2835_FSEL_ALT3>;
-	};
 };
 
 &i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_gpio0>;
 	status = "okay";
 	clock-frequency = <100000>;
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_gpio2>;
 	status = "okay";
 	clock-frequency = <100000>;
 };
@@ -64,11 +63,15 @@
 };
 
 &sdhci {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio48>;
 	status = "okay";
 	bus-width = <4>;
 };
 
 &pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index a78759e..0890d97 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -23,3 +23,9 @@
 		};
 	};
 };
+
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+	compatible = "brcm,bcm2835-thermal";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
index 39dccf6..bf19e8c 100644
--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
@@ -27,7 +27,7 @@
 };
 
 &gpio {
-	pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>;
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
 
 	/* I2S interface */
 	i2s_alt0: i2s_alt0 {
diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi
index 9d0651d..519a44f 100644
--- a/arch/arm/boot/dts/bcm2836.dtsi
+++ b/arch/arm/boot/dts/bcm2836.dtsi
@@ -76,3 +76,9 @@
 	interrupt-parent = <&local_intc>;
 	interrupts = <8>;
 };
+
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+	compatible = "brcm,bcm2836-thermal";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index 46d46d8..9a44da1 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -104,7 +104,7 @@
 			reg = <0x7e104000 0x10>;
 		};
 
-		mailbox: mailbox@7e00b800 {
+		mailbox: mailbox@7e00b880 {
 			compatible = "brcm,bcm2835-mbox";
 			reg = <0x7e00b880 0x40>;
 			interrupts = <0 1>;
@@ -132,6 +132,209 @@
 
 			interrupt-controller;
 			#interrupt-cells = <2>;
+
+			/* Defines pin muxing groups according to
+			 * BCM2835-ARM-Peripherals.pdf page 102.
+			 *
+			 * While each pin can have its mux selected
+			 * for various functions individually, some
+			 * groups only make sense to switch to a
+			 * particular function together.
+			 */
+			dpi_gpio0: dpi_gpio0 {
+				brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11
+					     12 13 14 15 16 17 18 19
+					     20 21 22 23 24 25 26 27>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+			emmc_gpio22: emmc_gpio22 {
+				brcm,pins = <22 23 24 25 26 27>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+			emmc_gpio34: emmc_gpio34 {
+				brcm,pins = <34 35 36 37 38 39>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+				brcm,pull = <BCM2835_PUD_OFF
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP>;
+			};
+			emmc_gpio48: emmc_gpio48 {
+				brcm,pins = <48 49 50 51 52 53>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+
+			gpclk0_gpio4: gpclk0_gpio4 {
+				brcm,pins = <4>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk1_gpio5: gpclk1_gpio5 {
+				brcm,pins = <5>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk1_gpio42: gpclk1_gpio42 {
+				brcm,pins = <42>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk1_gpio44: gpclk1_gpio44 {
+				brcm,pins = <44>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk2_gpio6: gpclk2_gpio6 {
+				brcm,pins = <6>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk2_gpio43: gpclk2_gpio43 {
+				brcm,pins = <43>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+
+			i2c0_gpio0: i2c0_gpio0 {
+				brcm,pins = <0 1>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			i2c0_gpio32: i2c0_gpio32 {
+				brcm,pins = <32 34>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			i2c0_gpio44: i2c0_gpio44 {
+				brcm,pins = <44 45>;
+				brcm,function = <BCM2835_FSEL_ALT1>;
+			};
+			i2c1_gpio2: i2c1_gpio2 {
+				brcm,pins = <2 3>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			i2c1_gpio44: i2c1_gpio44 {
+				brcm,pins = <44 45>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+			i2c_slave_gpio18: i2c_slave_gpio18 {
+				brcm,pins = <18 19 20 21>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+
+			jtag_gpio4: jtag_gpio4 {
+				brcm,pins = <4 5 6 12 13>;
+				brcm,function = <BCM2835_FSEL_ALT4>;
+			};
+			jtag_gpio22: jtag_gpio22 {
+				brcm,pins = <22 23 24 25 26 27>;
+				brcm,function = <BCM2835_FSEL_ALT4>;
+			};
+
+			pcm_gpio18: pcm_gpio18 {
+				brcm,pins = <18 19 20 21>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			pcm_gpio28: pcm_gpio28 {
+				brcm,pins = <28 29 30 31>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+
+			pwm0_gpio12: pwm0_gpio12 {
+				brcm,pins = <12>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			pwm0_gpio18: pwm0_gpio18 {
+				brcm,pins = <18>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			pwm0_gpio40: pwm0_gpio40 {
+				brcm,pins = <40>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			pwm1_gpio13: pwm1_gpio13 {
+				brcm,pins = <13>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			pwm1_gpio19: pwm1_gpio19 {
+				brcm,pins = <19>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			pwm1_gpio41: pwm1_gpio41 {
+				brcm,pins = <41>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			pwm1_gpio45: pwm1_gpio45 {
+				brcm,pins = <45>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+
+			sdhost_gpio48: sdhost_gpio48 {
+				brcm,pins = <48 49 50 51 52 53>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+
+			spi0_gpio7: spi0_gpio7 {
+				brcm,pins = <7 8 9 10 11>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			spi0_gpio35: spi0_gpio35 {
+				brcm,pins = <35 36 37 38 39>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			spi1_gpio16: spi1_gpio16 {
+				brcm,pins = <16 17 18 19 20 21>;
+				brcm,function = <BCM2835_FSEL_ALT4>;
+			};
+			spi2_gpio40: spi2_gpio40 {
+				brcm,pins = <40 41 42 43 44 45>;
+				brcm,function = <BCM2835_FSEL_ALT4>;
+			};
+
+			uart0_gpio14: uart0_gpio14 {
+				brcm,pins = <14 15>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			/* Separate from the uart0_gpio14 group
+			 * because it conflicts with spi1_gpio16, and
+			 * people often run uart0 on the two pins
+			 * without flow contrl.
+			 */
+			uart0_ctsrts_gpio16: uart0_ctsrts_gpio16 {
+				brcm,pins = <16 17>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+			uart0_gpio30: uart0_gpio30 {
+				brcm,pins = <30 31>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+			uart0_ctsrts_gpio32: uart0_ctsrts_gpio32 {
+				brcm,pins = <32 33>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+
+			uart1_gpio14: uart1_gpio14 {
+				brcm,pins = <14 15>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_ctsrts_gpio16: uart1_ctsrts_gpio16 {
+				brcm,pins = <16 17>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_gpio32: uart1_gpio32 {
+				brcm,pins = <32 33>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_ctsrts_gpio30: uart1_ctsrts_gpio30 {
+				brcm,pins = <30 31>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_gpio36: uart1_gpio36 {
+				brcm,pins = <36 37 38 39>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+			uart1_gpio40: uart1_gpio40 {
+				brcm,pins = <40 41>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_ctsrts_gpio42: uart1_ctsrts_gpio42 {
+				brcm,pins = <42 43>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
 		};
 
 		uart0: serial@7e201000 {
@@ -187,6 +390,13 @@
 			interrupts = <2 14>; /* pwa1 */
 		};
 
+		thermal: thermal@7e212000 {
+			compatible = "brcm,bcm2835-thermal";
+			reg = <0x7e212000 0x8>;
+			clocks = <&clocks BCM2835_CLOCK_TSENS>;
+			status = "disabled";
+		};
+
 		aux: aux@0x7e215000 {
 			compatible = "brcm,bcm2835-aux";
 			#clock-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
new file mode 100644
index 0000000..35e6ed6
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2016 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	compatible = "luxul,xap-1510v1", "brcm,bcm4708";
+	model = "Luxul XAP-1510 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&spi_nor {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
index 8ade7de..eac0f52 100644
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -9,7 +9,7 @@
 
 /dts-v1/;
 
-#include "bcm4708.dtsi"
+#include "bcm4709.dtsi"
 #include "bcm5301x-nand-cs0-bch8.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
index 0653e7e..aab39c9 100644
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -9,7 +9,7 @@
 
 /dts-v1/;
 
-#include "bcm4708.dtsi"
+#include "bcm4709.dtsi"
 #include "bcm5301x-nand-cs0-bch8.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
index a22ed14..fd38d2a 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -9,7 +9,7 @@
 
 /dts-v1/;
 
-#include "bcm4708.dtsi"
+#include "bcm4709.dtsi"
 #include "bcm5301x-nand-cs0-bch8.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
index ca18151..92f8a72 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -9,7 +9,7 @@
 
 /dts-v1/;
 
-#include "bcm4708.dtsi"
+#include "bcm4709.dtsi"
 #include "bcm5301x-nand-cs0-bch8.dtsi"
 
 / {
@@ -107,6 +107,10 @@
 	};
 };
 
+&uart0 {
+	status = "okay";
+};
+
 &usb2 {
 	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
 };
diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
new file mode 100644
index 0000000..9a92c24
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
@@ -0,0 +1,114 @@
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+
+/ {
+	compatible = "tplink,archer-c9-v1", "brcm,bcm4709", "brcm,bcm4708";
+	model = "TP-LINK Archer C9 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		lan {
+			label = "bcm53xx:blue:lan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		wps {
+			label = "bcm53xx:blue:wps";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		usb3 {
+			label = "bcm53xx:blue:usb3";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		usb2 {
+			label = "bcm53xx:blue:usb2";
+			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		wan-blue {
+			label = "bcm53xx:blue:wan";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		power {
+			label = "bcm53xx:blue:power";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4709.dtsi b/arch/arm/boot/dts/bcm4709.dtsi
new file mode 100644
index 0000000..f039765
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4709.dtsi
@@ -0,0 +1,11 @@
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+#include "bcm4708.dtsi"
+
+&uart0 {
+	clock-frequency = <125000000>;
+};
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
index c8c0b36..661348d 100644
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -9,7 +9,7 @@
 
 /dts-v1/;
 
-#include "bcm4708.dtsi"
+#include "bcm47094.dtsi"
 #include "bcm5301x-nand-cs0-bch1.dtsi"
 
 / {
@@ -107,7 +107,6 @@
 
 &uart0 {
 	status = "okay";
-	clock-frequency = <125000000>;
 };
 
 &usb3 {
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
new file mode 100644
index 0000000..169b35f
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -0,0 +1,111 @@
+/*
+ * Copyright 2016 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+	compatible = "luxul,xwr-3100v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XWR-3100 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power	{
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		lan3	{
+			label = "bcm53xx:green:lan1";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		lan4	{
+			label = "bcm53xx:green:lan0";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		wan	{
+			label = "bcm53xx:green:wan";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		lan1	{
+			label = "bcm53xx:green:lan3";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		lan2	{
+			label = "bcm53xx:green:lan2";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		usb3	{
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		status	{
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		2ghz {
+			label = "bcm53xx:green:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		5ghz {
+			label = "bcm53xx:green:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
new file mode 100644
index 0000000..521b415
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "netgear,r8500", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Netgear R8500";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power0 {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		power1 {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		5ghz-1 {
+			label = "bcm53xx:white:5ghz-1";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		5ghz-2 {
+			label = "bcm53xx:white:5ghz-2";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		usb2 {
+			label = "bcm53xx:white:usb2";
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		usb3 {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		brightness {
+			label = "Backlight";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+
+		rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi
new file mode 100644
index 0000000..4f09aa0
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094.dtsi
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+#include "bcm4708.dtsi"
+
+/ {
+	usb3_phy: usb3-phy {
+		compatible = "brcm,ns-bx-usb3-phy";
+	};
+};
+
+&uart0 {
+	clock-frequency = <125000000>;
+};
diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
new file mode 100644
index 0000000..4403ae8
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+	compatible = "tenda,ac9", "brcm,bcm47189", "brcm,bcm53573";
+	model = "Tenda AC9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		usb {
+			label = "bcm53xx:blue:usb";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		wps {
+			label = "bcm53xx:blue:wps";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		system {
+			label = "bcm53xx:blue:system";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
new file mode 100644
index 0000000..b4e875d
--- /dev/null
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
@@ -0,0 +1,13 @@
+/*
+ * Copyright 2016 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+#include "bcm5301x-nand-cs0.dtsi"
+
+&nandcs {
+	nand-ecc-algo = "bch";
+	nand-ecc-strength = <4>;
+	nand-ecc-step-size = <512>;
+};
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index ae4b388..f09a2bb 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -149,6 +149,13 @@
 		clock-names = "phy-ref-clk";
 	};
 
+	usb3_phy: usb3-phy {
+		compatible = "brcm,ns-ax-usb3-phy";
+		reg = <0x18105000 0x1000>, <0x18003000 0x1000>;
+		reg-names = "dmp", "ccb-mii";
+		#phy-cells = <0>;
+	};
+
 	axi@18000000 {
 		compatible = "brcm,bus-axi";
 		reg = <0x18000000 0x1000>;
diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi
new file mode 100644
index 0000000..e2c496a
--- /dev/null
+++ b/arch/arm/boot/dts/bcm53573.dtsi
@@ -0,0 +1,159 @@
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+	};
+
+	mpcore {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x18310000 0x00008000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+			      <0x2000 0x0100>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		alp: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <40000000>;
+		};
+	};
+
+	axi@18000000 {
+		compatible = "brcm,bus-axi";
+		reg = <0x18000000 0x1000>;
+		ranges = <0x00000000 0x18000000 0x00100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0x000fffff 0xffff>;
+		interrupt-map =
+			/* ChipCommon */
+			<0x00000000 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* IEEE 802.11 0 */
+			<0x00001000 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* PCIe Controller 0 */
+			<0x00002000 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00002000 1 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00002000 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00002000 3 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00002000 4 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00002000 5 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* USB 2.0 Controller */
+			<0x00004000 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 0 */
+			<0x00005000 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* IEEE 802.11 1 */
+			<0x0000a000 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 1 */
+			<0x0000b000 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+		chipcommon: chipcommon@0 {
+			compatible = "simple-bus";
+			reg = <0x00000000 0x1000>;
+			ranges;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			uart0: serial@0300 {
+				compatible = "ns16550a";
+				reg = <0x0300 0x100>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_PPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&alp>;
+				status = "okay";
+			};
+		};
+
+		usb2: usb2@4000 {
+			reg = <0x4000 0x1000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ehci: ehci@4000 {
+				compatible = "generic-ehci";
+				reg = <0x4000 0x1000>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			ohci: ohci@d000 {
+				#usb-cells = <0>;
+
+				compatible = "generic-ohci";
+				reg = <0xd000 0x1000>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gmac0: ethernet@5000 {
+			reg = <0x5000 0x1000>;
+		};
+
+		gmac1: ethernet@b000 {
+			reg = <0xb000 0x1000>;
+		};
+
+		pmu@12000 {
+			compatible = "simple-mfd", "syscon";
+			reg = <0x00012000 0x00001000>;
+
+			ilp: ilp {
+				compatible = "brcm,bcm53573-ilp";
+				clocks = <&alp>;
+				#clock-cells = <0>;
+				clock-output-names = "ilp";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index 05c5f98..59d96fb 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -139,3 +139,37 @@
 		groups = "nand_grp";
 	};
 };
+
+&qspi {
+	bspi-sel = <0>;
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
index f485308..57aa5f8 100644
--- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
+++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
@@ -48,7 +48,7 @@
 		reg = <0x00000000 0x80000000>;
 	};
 
-	choosen {
+	chosen {
 		bootargs = "earlyprintk";
 		stdout-path = "serial0:115200n8";
 	};
@@ -58,7 +58,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		reg_usb0_vbus: regulator@0 {
+		reg_usb0_vbus: regulator_usb0 {
 			compatible = "regulator-fixed";
 			regulator-name = "usb0_vbus";
 			regulator-min-microvolt = <5000000>;
@@ -67,7 +67,7 @@
 			enable-active-high;
 		};
 
-		reg_usb1_vbus: regulator@1 {
+		reg_usb1_vbus: regulator_usb1 {
 			compatible = "regulator-fixed";
 			regulator-name = "usb1_vbus";
 			regulator-min-microvolt = <5000000>;
@@ -76,7 +76,7 @@
 			enable-active-high;
 		};
 
-		reg_usb2_vbus: regulator@2 {
+		reg_usb2_vbus: regulator_usb2 {
 			compatible = "regulator-fixed";
 			regulator-name = "usb2_vbus";
 			regulator-min-microvolt = <5000000>;
@@ -85,7 +85,7 @@
 			enable-active-high;
 		};
 
-		reg_sdio1_vmmc: regulator@3 {
+		reg_sdio1_vmmc: regulator_sdio1_vmmc {
 			compatible = "regulator-fixed";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
@@ -95,7 +95,7 @@
 			gpio = <&portb 21 GPIO_ACTIVE_HIGH>;
 		};
 
-		reg_sdio1_vqmmc: regulator@4 {
+		reg_sdio1_vqmmc: regulator_sido1_vqmmc {
 			compatible = "regulator-gpio";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/cloudengines-pogoplug-series-3.dts b/arch/arm/boot/dts/cloudengines-pogoplug-series-3.dts
new file mode 100644
index 0000000..bfde32e
--- /dev/null
+++ b/arch/arm/boot/dts/cloudengines-pogoplug-series-3.dts
@@ -0,0 +1,94 @@
+/*
+ * cloudengines-pogoplug-series-3.dtsi - Device tree file for Cloud Engines PogoPlug Series 3
+ *
+ * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/dts-v1/;
+#include "ox820.dtsi"
+
+/ {
+	model = "Cloud Engines PogoPlug Series 3";
+
+	compatible = "cloudengines,pogoplugv3", "oxsemi,ox820";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		/* 128Mbytes DDR */
+		reg = <0x60000000 0x8000000>;
+	};
+
+	aliases {
+		serial0 = &uart0;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "pogoplug:blue";
+			gpios = <&gpio0 2 0>;
+			default-state = "keep";
+		};
+
+		orange {
+			label = "pogoplug:orange";
+			gpios = <&gpio1 16 1>;
+			default-state = "keep";
+		};
+
+		green {
+			label = "pogoplug:green";
+			gpios = <&gpio1 17 1>;
+			default-state = "keep";
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+};
+
+&nandc {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+
+	nand@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-ecc-mode = "soft";
+		nand-ecc-algo = "hamming";
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x00e00000>;
+			read-only;
+		};
+
+		partition@e00000 {
+			label = "ubi";
+			reg = <0x00e00000 0x07200000>;
+		};
+	};
+};
+
+&etha {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_etha_mdio>;
+};
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index 7b8ab21..afcb482 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -13,6 +13,7 @@
 
 	aliases {
 		serial2 = &serial2;
+		ethernet0 = &eth0;
 	};
 
 	chosen {
@@ -122,7 +123,7 @@
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
-	cd-gpios = <&gpio 64 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio 64 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -158,6 +159,14 @@
 	rx-num-evt = <32>;
 };
 
+&usb_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
 &aemif {
 	pinctrl-names = "default";
 	pinctrl-0 = <&nand_pins>;
@@ -219,3 +228,11 @@
 		};
 	};
 };
+
+&prictrl {
+	status = "okay";
+};
+
+&memctrl {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index f79e1b9..104155d 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -36,6 +36,7 @@
 			reg = <0x14120 0x50>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			#pinctrl-cells = <2>;
 			pinctrl-single,bit-per-mux;
 			pinctrl-single,register-width = <32>;
 			pinctrl-single,function-mask = <0xf>;
@@ -186,7 +187,43 @@
 					0xc 0x88888888 0xffffffff
 				>;
 			};
+			lcd_pins: pinmux_lcd_pins {
+				pinctrl-single,bits = <
+					/*
+					 * LCD_D[2], LCD_D[3], LCD_D[4], LCD_D[5],
+					 * LCD_D[6], LCD_D[7]
+					 */
+					0x40 0x22222200 0xffffff00
+					/*
+					 * LCD_D[10], LCD_D[11], LCD_D[12], LCD_D[13],
+					 * LCD_D[14], LCD_D[15], LCD_D[0], LCD_D[1]
+					 */
+					0x44 0x22222222 0xffffffff
+					/* LCD_D[8], LCD_D[9] */
+					0x48 0x00000022 0x000000ff
 
+					/* LCD_PCLK */
+					0x48 0x02000000 0x0f000000
+					/* LCD_AC_ENB_CS, LCD_VSYNC, LCD_HSYNC */
+					0x4c 0x02000022 0x0f0000ff
+				>;
+			};
+
+		};
+		prictrl: priority-controller@14110 {
+			compatible = "ti,da850-mstpri";
+			reg = <0x14110 0x0c>;
+			status = "disabled";
+		};
+		cfgchip: chip-controller@1417c {
+			compatible = "ti,da830-cfgchip", "syscon", "simple-mfd";
+			reg = <0x1417c 0x14>;
+
+			usb_phy: usb-phy {
+				compatible = "ti,da830-usb-phy";
+				#phy-cells = <1>;
+				status = "disabled";
+			};
 		};
 		edma0: edma@0 {
 			compatible = "ti,edma3-tpcc";
@@ -280,6 +317,8 @@
 		mmc0: mmc@40000 {
 			compatible = "ti,da830-mmc";
 			reg = <0x40000 0x1000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
 			interrupts = <16>;
 			dmas = <&edma0 16 0>, <&edma0 17 0>;
 			dma-names = "rx", "tx";
@@ -288,6 +327,8 @@
 		mmc1: mmc@21b000 {
 			compatible = "ti,da830-mmc";
 			reg = <0x21b000 0x1000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
 			interrupts = <72>;
 			dmas = <&edma1 28 0>, <&edma1 29 0>;
 			dma-names = "rx", "tx";
@@ -336,6 +377,8 @@
 			num-cs = <6>;
 			ti,davinci-spi-intr-line = <1>;
 			interrupts = <20>;
+			dmas = <&edma0 14 0>, <&edma0 15 0>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 		spi1: spi@30e000 {
@@ -350,6 +393,16 @@
 			dma-names = "rx", "tx";
 			status = "disabled";
 		};
+		usb0: usb@200000 {
+			compatible = "ti,da830-musb";
+			reg = <0x200000 0x10000>;
+			interrupts = <58>;
+			interrupt-names = "mc";
+			dr_mode = "otg";
+			phys = <&usb_phy 0>;
+			phy-names = "usb-phy";
+			status = "disabled";
+		};
 		mdio: mdio@224000 {
 			compatible = "ti,davinci_mdio";
 			#address-cells = <1>;
@@ -386,6 +439,11 @@
 			ti,davinci-gpio-unbanked = <0>;
 			status = "disabled";
 		};
+		pinconf: pin-controller@22c00c {
+			compatible = "ti,da850-pupd";
+			reg = <0x22c00c 0x8>;
+			status = "disabled";
+		};
 
 		mcasp0: mcasp@100000 {
 			compatible = "ti,da830-mcasp-audio";
@@ -399,6 +457,13 @@
 				<&edma0 0 1>;
 			dma-names = "tx", "rx";
 		};
+
+		display: display@213000 {
+			compatible = "ti,da850-tilcdc";
+			reg = <0x213000 0x1000>;
+			interrupts = <52>;
+			status = "disabled";
+		};
 	};
 	aemif: aemif@68000000 {
 		compatible = "ti,da850-aemif";
@@ -410,4 +475,9 @@
 			  1 0 0x68000000 0x00008000>;
 		status = "disabled";
 	};
+	memctrl: memory-controller@b0000000 {
+		compatible = "ti,da850-ddr-controller";
+		reg = <0xb0000000 0xe8>;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
index ff90a6c..1facc5f 100644
--- a/arch/arm/boot/dts/dm814x.dtsi
+++ b/arch/arm/boot/dts/dm814x.dtsi
@@ -373,6 +373,7 @@
 					reg = <0x800 0x438>;
 					#address-cells = <1>;
 					#size-cells = <0>;
+					#pinctrl-cells = <1>;
 					pinctrl-single,register-width = <32>;
 					pinctrl-single,function-mask = <0x307ff>;
 				};
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index f1e0f77..61dd2f6 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -83,6 +83,7 @@
 			reg = <0x48140000 0x21000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+			#pinctrl-cells = <1>;
 			ranges = <0 0x48140000 0x21000>;
 
 			dm816x_pinmux: pinmux@800 {
@@ -90,6 +91,7 @@
 				reg = <0x800 0x50a>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				#pinctrl-cells = <1>;
 				pinctrl-single,register-width = <16>;
 				pinctrl-single,function-mask = <0xf>;
 			};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index d4fcd68..addb753 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -171,6 +171,7 @@
 					reg = <0x1400 0x0468>;
 					#address-cells = <1>;
 					#size-cells = <0>;
+					#pinctrl-cells = <1>;
 					#interrupt-cells = <1>;
 					interrupt-controller;
 					pinctrl-single,register-width = <32>;
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
new file mode 100644
index 0000000..2b9a5a8
--- /dev/null
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -0,0 +1,230 @@
+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "dra72-evm-common.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	compatible = "ti,dra718-evm", "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7";
+	model = "TI DRA718 EVM";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
+	};
+
+	vpo_sd_1v8_3v3: gpio-regulator-TPS74801 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "vddshv8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-boot-on;
+		vin-supply = <&evm_5v0>;
+
+		gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0
+			  3000000 0x1>;
+	};
+
+	poweroff: gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>;
+		input;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	lp8733: lp8733@60 {
+		compatible = "ti,lp8733";
+		reg = <0x60>;
+
+		buck0-in-supply =<&vsys_3v3>;
+		buck1-in-supply =<&vsys_3v3>;
+		ldo0-in-supply =<&evm_5v0>;
+		ldo1-in-supply =<&evm_5v0>;
+
+		lp8733_regulators: regulators {
+			lp8733_buck0_reg: buck0 {
+				/* FB_B0 -> LP8733-BUCK1 - VPO_S1_AVS - VDD_CORE_AVS (core, mpu, gpu) */
+				regulator-name = "lp8733-buck0";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			lp8733_buck1_reg: buck1 {
+				/* FB_B1 -> LP8733-BUCK2 - VPO_S2_AVS - VDD_DSP_AVS (DSP/eve/iva) */
+				regulator-name = "lp8733-buck1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			lp8733_ldo0_reg: ldo0 {
+				/* LDO0 -> LP8733-LDO1 - VPO_L1_3V3 - VDDSHV8 (optional) */
+				regulator-name = "lp8733-ldo0";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			lp8733_ldo1_reg: ldo1 {
+				/* LDO1 -> LP8733-LDO2 - VPO_L2_3V3 - VDDA_USB3V3 */
+				regulator-name = "lp8733-ldo1";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+
+	lp8732: lp8732@61 {
+		compatible = "ti,lp8732";
+		reg = <0x61>;
+
+		buck0-in-supply =<&vsys_3v3>;
+		buck1-in-supply =<&vsys_3v3>;
+		ldo0-in-supply =<&vsys_3v3>;
+		ldo1-in-supply =<&vsys_3v3>;
+
+		lp8732_regulators: regulators {
+			lp8732_buck0_reg: buck0 {
+				/* FB_B0 -> LP8732-BUCK1 - VPO_S3_1V8 - VDDS_1V8 */
+				regulator-name = "lp8732-buck0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			lp8732_buck1_reg: buck1 {
+				/* FB_B1 -> LP8732-BUCK2 - VPO_S4_DDR - VDD_DDR_1V35 */
+				regulator-name = "lp8732-buck1";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			lp8732_ldo0_reg: ldo0 {
+				/* LDO0 -> LP8732-LDO1 - VPO_L3_1V8 - VDA_1V8_PLL */
+				regulator-name = "lp8732-ldo0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			lp8732_ldo1_reg: ldo1 {
+				/* LDO1 -> LP8732-LDO2 - VPO_L4_1V8 - VDA_1V8_PHY */
+				regulator-name = "lp8732-ldo1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&pcf_gpio_21 {
+	interrupt-parent = <&gpio7>;
+	interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&pcf_hdmi {
+	p0 {
+		/*
+		 * PM_OEn to High: Disable routing I2C3 to PM_I2C
+		 * With this PM_SEL(p3) should not matter
+		 */
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "pm_oe_n";
+	};
+};
+
+&mmc1 {
+	vmmc_aux-supply = <&vpo_sd_1v8_3v3>;
+};
+
+&mac {
+	mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
+		     <&pcf_hdmi 9 GPIO_ACTIVE_LOW>,	/* P11 */
+		     <&pcf_hdmi 10 GPIO_ACTIVE_LOW>;	/* P12 */
+	dual_emac;
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <2>;
+	phy-mode = "rgmii-id";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <3>;
+	phy-mode = "rgmii-id";
+	dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+	dp83867_0: ethernet-phy@2 {
+		reg = <2>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+		ti,impedance-control = <0x1f>;
+	};
+
+	dp83867_1: ethernet-phy@3 {
+		reg = <3>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+		ti,impedance-control = <0x1f>;
+	};
+};
+
+/* No Sata on this device */
+&sata_phy {
+	status = "disabled";
+};
+
+&sata {
+	status = "disabled";
+};
+
+/* No RTC on this device */
+&rtc {
+	status = "disabled";
+};
+
+&usb2_phy1 {
+	phy-supply = <&lp8733_ldo1_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&lp8733_ldo1_reg>;
+};
+
+&dss {
+	/* Supplied by VDA_1V8_PLL */
+	vdda_video-supply = <&lp8732_ldo0_reg>;
+};
+
+&hdmi {
+	/* Supplied by VDA_1V8_PHY */
+	vdda_video-supply = <&lp8732_ldo1_reg>;
+};
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index c94d8d64..e50fbee 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -18,11 +18,49 @@
 		display0 = &hdmi0;
 	};
 
+	evm_12v0: fixedregulator-evm12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	evm_5v0: fixedregulator-evm5v0 {
+		/* Output 1 of TPS43351QDAPRQ1 on dra72-evm */
+		/* Output 1 of LM5140QRWGTQ1 on dra71-evm */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: fixedregulator-vsys3v3 {
+		/* Output 2 of TPS43351QDAPRQ1 on dra72-evm */
+		/* Output 2 of LM5140QRWGTQ1 on dra71-evm */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	evm_3v3_sw: fixedregulator-evm_3v3 {
+		/* TPS22965DSG */
 		compatible = "regulator-fixed";
 		regulator-name = "evm_3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+		regulator-boot-on;
 	};
 
 	aic_dvdd: fixedregulator-aic_dvdd {
@@ -39,6 +77,7 @@
 		regulator-name = "evm_3v3_sd";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_3v3_sw>;
 		enable-active-high;
 		gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
 	};
@@ -69,9 +108,6 @@
 	tpd12s015: encoder {
 		compatible = "ti,tpd12s015";
 
-		pinctrl-names = "default";
-		pinctrl-0 = <&tpd12s015_pins>;
-
 		gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>,	/* P4, CT CP HPD */
 			<&pcf_hdmi 5 GPIO_ACTIVE_HIGH>,	/* P5, LS OE */
 			<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
@@ -134,72 +170,6 @@
 };
 
 &dra7_pmx_core {
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
-			DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
-		>;
-	};
-
-	i2c5_pins: pinmux_i2c5_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
-			DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
-		>;
-	};
-
-	i2c5_pins: pinmux_i2c5_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
-			DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
-		>;
-	};
-
-	nand_default: nand_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT  | MUX_MODE0) /* gpmc_ad0 */
-			DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT  | MUX_MODE0) /* gpmc_ad1 */
-			DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT  | MUX_MODE0) /* gpmc_ad2 */
-			DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT  | MUX_MODE0) /* gpmc_ad3 */
-			DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT  | MUX_MODE0) /* gpmc_ad4 */
-			DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT  | MUX_MODE0) /* gpmc_ad5 */
-			DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT  | MUX_MODE0) /* gpmc_ad6 */
-			DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT  | MUX_MODE0) /* gpmc_ad7 */
-			DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT  | MUX_MODE0) /* gpmc_ad8 */
-			DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT  | MUX_MODE0) /* gpmc_ad9 */
-			DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT  | MUX_MODE0) /* gpmc_ad10 */
-			DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT  | MUX_MODE0) /* gpmc_ad11 */
-			DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT  | MUX_MODE0) /* gpmc_ad12 */
-			DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT  | MUX_MODE0) /* gpmc_ad13 */
-			DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT  | MUX_MODE0) /* gpmc_ad14 */
-			DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT  | MUX_MODE0) /* gpmc_ad15 */
-			DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */
-			DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
-			DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
-			DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
-			DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */
-			DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT  | MUX_MODE0) /* gpmc_wait0 */
-		>;
-	};
-
-	usb1_pins: pinmux_usb1_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
-		>;
-	};
-
-	usb2_pins: pinmux_usb2_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
-		>;
-	};
-
-	tps65917_pins_default: tps65917_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3824, PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
-		>;
-	};
-
 	mmc1_pins_default: mmc1_pins_default {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14)	/* mmc1sdcd.gpio219 */
@@ -240,161 +210,12 @@
 			DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP)	/* wakeup0.off */
 		>;
 	};
-
-	hdmi_pins: pinmux_hdmi_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
-			DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
-		>;
-	};
-
-	tpd12s015_pins: pinmux_tpd12s015_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
-		>;
-	};
-
-	atl_pins: pinmux_atl_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5)	/* xref_clk1.atl_clk1 */
-			DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5)	/* xref_clk2.atl_clk2 */
-		>;
-	};
-
-	mcasp3_pins: pinmux_mcasp3_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_aclkx */
-			DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_fsx */
-			DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_axr0 */
-			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_axr1 */
-		>;
-	};
-
-	mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT_PULLDOWN | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE15)
-		>;
-	};
 };
 
 &i2c1 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <400000>;
 
-	tps65917: tps65917@58 {
-		compatible = "ti,tps65917";
-		reg = <0x58>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tps65917_pins_default>;
-
-		interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>;  /* IRQ_SYS_1N */
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		ti,system-power-controller;
-
-		tps65917_pmic {
-			compatible = "ti,tps65917-pmic";
-
-			tps65917_regulators: regulators {
-				smps1_reg: smps1 {
-					/* VDD_MPU */
-					regulator-name = "smps1";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps2_reg: smps2 {
-					/* VDD_CORE */
-					regulator-name = "smps2";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1150000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				smps3_reg: smps3 {
-					/* VDD_GPU IVA DSPEVE */
-					regulator-name = "smps3";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				smps4_reg: smps4 {
-					/* VDDS1V8 */
-					regulator-name = "smps4";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps5_reg: smps5 {
-					/* VDD_DDR */
-					regulator-name = "smps5";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				ldo1_reg: ldo1 {
-					/* LDO1_OUT --> SDIO  */
-					regulator-name = "ldo1";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					regulator-boot-on;
-					regulator-allow-bypass;
-				};
-
-				ldo3_reg: ldo3 {
-					/* VDDA_1V8_PHY */
-					regulator-name = "ldo3";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				ldo5_reg: ldo5 {
-					/* VDDA_1V8_PLL */
-					regulator-name = "ldo5";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo4_reg: ldo4 {
-					/* VDDA_3V_USB: VDDA_USBHS33 */
-					regulator-name = "ldo4";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-				};
-			};
-		};
-
-		tps65917_power_button {
-			compatible = "ti,palmas-pwrbutton";
-			interrupt-parent = <&tps65917>;
-			interrupts = <1 IRQ_TYPE_NONE>;
-			wakeup-source;
-			ti,palmas-long-press-seconds = <6>;
-		};
-	};
-
 	pcf_gpio_21: gpio@21 {
 		compatible = "ti,pcf8575", "nxp,pcf8575";
 		reg = <0x21>;
@@ -423,8 +244,6 @@
 
 &i2c5 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c5_pins>;
 	clock-frequency = <400000>;
 
 	pcf_hdmi: pcf8575@26 {
@@ -462,8 +281,6 @@
 
 &gpmc {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_default>;
 	ranges = <0 0 0x08000000 0x01000000>;	/* minimum GPMC partition = 16MB */
 	nand@0,0 {
 		/* To use NAND, DIP switch SW5 must be set like so:
@@ -548,14 +365,6 @@
 	};
 };
 
-&usb2_phy1 {
-	phy-supply = <&ldo4_reg>;
-};
-
-&usb2_phy2 {
-	phy-supply = <&ldo4_reg>;
-};
-
 &omap_dwc3_1 {
 	extcon = <&extcon_usb1>;
 };
@@ -566,14 +375,10 @@
 
 &usb1 {
 	dr_mode = "peripheral";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_pins>;
 };
 
 &usb2 {
 	dr_mode = "host";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb2_pins>;
 };
 
 &mmc1 {
@@ -581,7 +386,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins_default>;
 	vmmc-supply = <&evm_3v3_sd>;
-	vmmc_aux-supply = <&ldo1_reg>;
 	bus-width = <4>;
 	/*
 	 * SDCD signal is not being used here - using the fact that GPIO mode
@@ -603,71 +407,8 @@
 	max-frequency = <192000000>;
 };
 
-&dra7_pmx_core {
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 2 */
-			DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d12.rgmii1_txc */
-			DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d13.rgmii1_tctl */
-			DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d14.rgmii1_td3 */
-			DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d15.rgmii1_td2 */
-			DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d16.rgmii1_td1 */
-			DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d17.rgmii1_td0 */
-			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3)	/* vin2a_d18.rgmii1_rclk */
-			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3)	/* vin2a_d19.rgmii1_rctl */
-			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3)	/* vin2a_d20.rgmii1_rd3 */
-			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3)	/* vin2a_d21.rgmii1_rd2 */
-			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3)	/* vin2a_d22.rgmii1_rd1 */
-			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3)	/* vin2a_d23.rgmii1_rd0 */
-		>;
-
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 2 */
-			DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_d.mdio_d */
-			DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15)
-		>;
-	};
-};
-
 &mac {
 	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
 };
 
 &dcan1 {
@@ -741,16 +482,11 @@
 
 &dss {
 	status = "ok";
-
-	vdda_video-supply = <&ldo5_reg>;
 };
 
 &hdmi {
 	status = "ok";
 
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_pins>;
-
 	port {
 		hdmi_out: endpoint {
 			remote-endpoint = <&tpd12s015_in>;
@@ -759,9 +495,6 @@
 };
 
 &atl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&atl_pins>;
-
 	assigned-clocks = <&abe_dpll_sys_clk_mux>,
 			  <&atl_gfclk_mux>,
 			  <&dpll_abe_ck>,
@@ -780,9 +513,6 @@
 
 &mcasp3 {
 	#sound-dai-cells = <0>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&mcasp3_pins>;
-	pinctrl-1 = <&mcasp3_sleep_pins>;
 
 	assigned-clocks = <&mcasp3_ahclkx_mux>;
 	assigned-clock-parents = <&atl_clkin2_ck>;
diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts
index 3b23b32..c3d939c 100644
--- a/arch/arm/boot/dts/dra72-evm-revc.dts
+++ b/arch/arm/boot/dts/dra72-evm-revc.dts
@@ -17,17 +17,22 @@
 	};
 };
 
-&tps65917_regulators {
-	ldo2_reg: ldo2 {
-		/* LDO2_OUT --> VDDA_1V8_PHY2 */
-		regulator-name = "ldo2";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		regulator-boot-on;
+&i2c1 {
+	tps65917: tps65917@58 {
+		reg = <0x58>;
+
+		interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>;  /* IRQ_SYS_1N */
 	};
 };
 
+#include "dra72-evm-tps65917.dtsi"
+
+&ldo2_reg {
+	/* LDO2_OUT --> VDDA_1V8_PHY2 */
+	regulator-always-on;
+	regulator-boot-on;
+};
+
 &hdmi {
 	vdda-supply = <&ldo2_reg>;
 };
diff --git a/arch/arm/boot/dts/dra72-evm-tps65917.dtsi b/arch/arm/boot/dts/dra72-evm-tps65917.dtsi
new file mode 100644
index 0000000..ee6dac4
--- /dev/null
+++ b/arch/arm/boot/dts/dra72-evm-tps65917.dtsi
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65917-q1.pdf
+ */
+
+&tps65917 {
+	compatible = "ti,tps65917";
+
+	interrupt-controller;
+	#interrupt-cells = <2>;
+
+	ti,system-power-controller;
+
+	tps65917_pmic {
+		compatible = "ti,tps65917-pmic";
+
+		smps1-in-supply = <&vsys_3v3>;
+		smps2-in-supply = <&vsys_3v3>;
+		smps3-in-supply = <&vsys_3v3>;
+		smps4-in-supply = <&vsys_3v3>;
+		smps5-in-supply = <&vsys_3v3>;
+		ldo1-in-supply = <&vsys_3v3>;
+		ldo2-in-supply = <&vsys_3v3>;
+		ldo3-in-supply = <&vsys_3v3>;
+		ldo4-in-supply = <&evm_5v0>;
+		ldo5-in-supply = <&vsys_3v3>;
+
+		tps65917_regulators: regulators {
+			smps1_reg: smps1 {
+				/* VDD_MPU */
+				regulator-name = "smps1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			smps2_reg: smps2 {
+				/* VDD_CORE */
+				regulator-name = "smps2";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			smps3_reg: smps3 {
+				/* VDD_GPU IVA DSPEVE */
+				regulator-name = "smps3";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			smps4_reg: smps4 {
+				/* VDDS1V8 */
+				regulator-name = "smps4";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			smps5_reg: smps5 {
+				/* VDD_DDR */
+				regulator-name = "smps5";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				/* LDO1_OUT --> SDIO  */
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-allow-bypass;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-allow-bypass;
+			};
+
+			ldo3_reg: ldo3 {
+				/* VDDA_1V8_PHY */
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5_reg: ldo5 {
+				/* VDDA_1V8_PLL */
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: ldo4 {
+				/* VDDA_3V_USB: VDDA_USBHS33 */
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+			};
+		};
+	};
+
+	tps65917_power_button {
+		compatible = "ti,palmas-pwrbutton";
+		interrupt-parent = <&tps65917>;
+		interrupts = <1 IRQ_TYPE_NONE>;
+		wakeup-source;
+		ti,palmas-long-press-seconds = <6>;
+	};
+};
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index e3a9b69..cd9c4ff 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -15,16 +15,16 @@
 	};
 };
 
-&tps65917_regulators {
-	ldo2_reg: ldo2 {
-		/* LDO2_OUT --> TP1017 (UNUSED)  */
-		regulator-name = "ldo2";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-allow-bypass;
+&i2c1 {
+	tps65917: tps65917@58 {
+		reg = <0x58>;
+
+		interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>;  /* IRQ_SYS_1N */
 	};
 };
 
+#include "dra72-evm-tps65917.dtsi"
+
 &hdmi {
 	vdda-supply = <&ldo3_reg>;
 };
diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
index cd11940..0124faf 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -8,13 +8,14 @@
  * kind, whether express or implied.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	compatible = "renesas,emev2";
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		gpio0 = &gpio0;
diff --git a/arch/arm/boot/dts/exynos3250-artik5-eval.dts b/arch/arm/boot/dts/exynos3250-artik5-eval.dts
index be4d6aa..4bd2ee8 100644
--- a/arch/arm/boot/dts/exynos3250-artik5-eval.dts
+++ b/arch/arm/boot/dts/exynos3250-artik5-eval.dts
@@ -28,7 +28,7 @@
 	vqmmc-supply = <&ldo3_reg>;
 	card-detect-delay = <200>;
 	clock-frequency = <100000000>;
-	clock-freq-min-max = <400000 100000000>;
+	max-frequency = <100000000>;
 	samsung,dw-mshc-ciu-div = <1>;
 	samsung,dw-mshc-sdr-timing = <0 1>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index a70819b..59c89d7 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -310,7 +310,7 @@
 	card-detect-delay = <200>;
 	vmmc-supply = <&ldo12_reg>;
 	clock-frequency = <100000000>;
-	clock-freq-min-max = <400000 100000000>;
+	max-frequency = <100000000>;
 	samsung,dw-mshc-ciu-div = <1>;
 	samsung,dw-mshc-sdr-timing = <0 1>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index 66f04f6..cccfe4b 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -435,7 +435,7 @@
 	card-detect-delay = <200>;
 	vmmc-supply = <&vemmc_reg>;
 	clock-frequency = <100000000>;
-	clock-freq-min-max = <400000 100000000>;
+	max-frequency = <100000000>;
 	samsung,dw-mshc-ciu-div = <1>;
 	samsung,dw-mshc-sdr-timing = <0 1>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
index ec331169..a149f14 100644
--- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
@@ -362,8 +362,14 @@
 
 		interrupt-controller;
 		interrupt-parent = <&gic>;
-		interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>,
-				<0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		#interrupt-cells = <2>;
 	};
 
@@ -373,8 +379,14 @@
 
 		interrupt-controller;
 		interrupt-parent = <&gic>;
-		interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>,
-				<0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 		#interrupt-cells = <2>;
 	};
 
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 3967ee5..548413e 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -649,7 +649,7 @@
 	card-detect-delay = <200>;
 	vmmc-supply = <&ldo12_reg>;
 	clock-frequency = <100000000>;
-	clock-freq-min-max = <400000 100000000>;
+	max-frequency = <100000000>;
 	samsung,dw-mshc-ciu-div = <1>;
 	samsung,dw-mshc-sdr-timing = <0 1>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index e9d2556..ba17ee1 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -20,6 +20,8 @@
 #include "exynos4-cpu-thermal.dtsi"
 #include "exynos-syscon-restart.dtsi"
 #include <dt-bindings/clock/exynos3250.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	compatible = "samsung,exynos3250";
@@ -211,7 +213,8 @@
 		rtc: rtc@10070000 {
 			compatible = "samsung,s3c6410-rtc";
 			reg = <0x10070000 0x100>;
-			interrupts = <0 73 0>, <0 74 0>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-parent = <&pmu_system_controller>;
 			status = "disabled";
 		};
@@ -219,7 +222,7 @@
 		tmu: tmu@100C0000 {
 			compatible = "samsung,exynos3250-tmu";
 			reg = <0x100C0000 0x100>;
-			interrupts = <0 216 0>;
+			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_TMU_APBIF>;
 			clock-names = "tmu_apbif";
 			#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -234,14 +237,21 @@
 			      <0x10482000 0x1000>,
 			      <0x10484000 0x2000>,
 			      <0x10486000 0x2000>;
-			interrupts = <1 9 0xf04>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
 		mct@10050000 {
 			compatible = "samsung,exynos4210-mct";
 			reg = <0x10050000 0x800>;
-			interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>,
-				     <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>;
+			interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
 			clock-names = "fin_pll", "mct";
 		};
@@ -249,24 +259,24 @@
 		pinctrl_1: pinctrl@11000000 {
 			compatible = "samsung,exynos3250-pinctrl";
 			reg = <0x11000000 0x1000>;
-			interrupts = <0 225 0>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
 
 			wakeup-interrupt-controller {
 				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupts = <0 48 0>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
 		pinctrl_0: pinctrl@11400000 {
 			compatible = "samsung,exynos3250-pinctrl";
 			reg = <0x11400000 0x1000>;
-			interrupts = <0 240 0>;
+			interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		jpeg: codec@11830000 {
 			compatible = "samsung,exynos3250-jpeg";
 			reg = <0x11830000 0x1000>;
-			interrupts = <0 171 0>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_JPEG>, <&cmu CLK_SCLK_JPEG>;
 			clock-names = "jpeg", "sclk";
 			power-domains = <&pd_cam>;
@@ -280,7 +290,8 @@
 		sysmmu_jpeg: sysmmu@11A60000 {
 			compatible = "samsung,exynos-sysmmu";
 			reg = <0x11a60000 0x1000>;
-			interrupts = <0 156 0>, <0 161 0>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "sysmmu", "master";
 			clocks = <&cmu CLK_SMMUJPEG>, <&cmu CLK_JPEG>;
 			power-domains = <&pd_cam>;
@@ -291,7 +302,9 @@
 			compatible = "samsung,exynos3250-fimd";
 			reg = <0x11c00000 0x30000>;
 			interrupt-names = "fifo", "vsync", "lcd_sys";
-			interrupts = <0 84 0>, <0 85 0>, <0 86 0>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>;
 			clock-names = "sclk_fimd", "fimd";
 			power-domains = <&pd_lcd0>;
@@ -303,7 +316,7 @@
 		dsi_0: dsi@11C80000 {
 			compatible = "samsung,exynos3250-mipi-dsi";
 			reg = <0x11C80000 0x10000>;
-			interrupts = <0 83 0>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			samsung,phy-type = <0>;
 			power-domains = <&pd_lcd0>;
 			phys = <&mipi_phy 1>;
@@ -318,7 +331,8 @@
 		sysmmu_fimd0: sysmmu@11E20000 {
 			compatible = "samsung,exynos-sysmmu";
 			reg = <0x11e20000 0x1000>;
-			interrupts = <0 80 0>, <0 81 0>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "sysmmu", "master";
 			clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>;
 			power-domains = <&pd_lcd0>;
@@ -328,7 +342,7 @@
 		hsotg: hsotg@12480000 {
 			compatible = "snps,dwc2";
 			reg = <0x12480000 0x20000>;
-			interrupts = <0 141 0>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_USBOTG>;
 			clock-names = "otg";
 			phys = <&exynos_usbphy 0>;
@@ -339,7 +353,7 @@
 		mshc_0: mshc@12510000 {
 			compatible = "samsung,exynos5420-dw-mshc";
 			reg = <0x12510000 0x1000>;
-			interrupts = <0 142 0>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
 			clock-names = "biu", "ciu";
 			fifo-depth = <0x80>;
@@ -351,7 +365,7 @@
 		mshc_1: mshc@12520000 {
 			compatible = "samsung,exynos5420-dw-mshc";
 			reg = <0x12520000 0x1000>;
-			interrupts = <0 143 0>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
 			clock-names = "biu", "ciu";
 			fifo-depth = <0x80>;
@@ -363,7 +377,7 @@
 		mshc_2: mshc@12530000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12530000 0x1000>;
-			interrupts = <0 144 0>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_SDMMC2>, <&cmu CLK_SCLK_MMC2>;
 			clock-names = "biu", "ciu";
 			fifo-depth = <0x80>;
@@ -391,7 +405,7 @@
 			pdma0: pdma@12680000 {
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0x12680000 0x1000>;
-				interrupts = <0 138 0>;
+				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&cmu CLK_PDMA0>;
 				clock-names = "apb_pclk";
 				#dma-cells = <1>;
@@ -402,7 +416,7 @@
 			pdma1: pdma@12690000 {
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0x12690000 0x1000>;
-				interrupts = <0 139 0>;
+				interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&cmu CLK_PDMA1>;
 				clock-names = "apb_pclk";
 				#dma-cells = <1>;
@@ -415,7 +429,7 @@
 			compatible = "samsung,exynos3250-adc",
 				     "samsung,exynos-adc-v2";
 			reg = <0x126C0000 0x100>;
-			interrupts = <0 137 0>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "adc", "sclk";
 			clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
 			#io-channel-cells = <1>;
@@ -427,7 +441,7 @@
 		mfc: codec@13400000 {
 			compatible = "samsung,mfc-v7";
 			reg = <0x13400000 0x10000>;
-			interrupts = <0 102 0>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "mfc", "sclk_mfc";
 			clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>;
 			power-domains = <&pd_mfc>;
@@ -437,7 +451,8 @@
 		sysmmu_mfc: sysmmu@13620000 {
 			compatible = "samsung,exynos-sysmmu";
 			reg = <0x13620000 0x1000>;
-			interrupts = <0 96 0>, <0 98 0>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "sysmmu", "master";
 			clocks = <&cmu CLK_SMMUMFC_L>, <&cmu CLK_MFC>;
 			power-domains = <&pd_mfc>;
@@ -447,7 +462,7 @@
 		serial_0: serial@13800000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x13800000 0x100>;
-			interrupts = <0 109 0>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
 			clock-names = "uart", "clk_uart_baud0";
 			pinctrl-names = "default";
@@ -458,7 +473,7 @@
 		serial_1: serial@13810000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x13810000 0x100>;
-			interrupts = <0 110 0>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
 			clock-names = "uart", "clk_uart_baud0";
 			pinctrl-names = "default";
@@ -469,7 +484,7 @@
 		serial_2: serial@13820000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x13820000 0x100>;
-			interrupts = <0 111 0>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>;
 			clock-names = "uart", "clk_uart_baud0";
 			pinctrl-names = "default";
@@ -482,7 +497,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x13860000 0x100>;
-			interrupts = <0 113 0>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C0>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -495,7 +510,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x13870000 0x100>;
-			interrupts = <0 114 0>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C1>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -508,7 +523,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x13880000 0x100>;
-			interrupts = <0 115 0>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C2>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -521,7 +536,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x13890000 0x100>;
-			interrupts = <0 116 0>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C3>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -534,7 +549,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x138A0000 0x100>;
-			interrupts = <0 117 0>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C4>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -547,7 +562,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x138B0000 0x100>;
-			interrupts = <0 118 0>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C5>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -560,7 +575,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x138C0000 0x100>;
-			interrupts = <0 119 0>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C6>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -573,7 +588,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x138D0000 0x100>;
-			interrupts = <0 120 0>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C7>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -584,7 +599,7 @@
 		spi_0: spi@13920000 {
 			compatible = "samsung,exynos4210-spi";
 			reg = <0x13920000 0x100>;
-			interrupts = <0 121 0>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&pdma0 7>, <&pdma0 6>;
 			dma-names = "tx", "rx";
 			#address-cells = <1>;
@@ -600,7 +615,7 @@
 		spi_1: spi@13930000 {
 			compatible = "samsung,exynos4210-spi";
 			reg = <0x13930000 0x100>;
-			interrupts = <0 122 0>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&pdma1 7>, <&pdma1 6>;
 			dma-names = "tx", "rx";
 			#address-cells = <1>;
@@ -616,7 +631,7 @@
 		i2s2: i2s@13970000 {
 			compatible = "samsung,s3c6410-i2s";
 			reg = <0x13970000 0x100>;
-			interrupts = <0 126 0>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2S>, <&cmu CLK_SCLK_I2S>;
 			clock-names = "iis", "i2s_opclk0";
 			dmas = <&pdma0 14>, <&pdma0 13>;
@@ -629,15 +644,19 @@
 		pwm: pwm@139D0000 {
 			compatible = "samsung,exynos4210-pwm";
 			reg = <0x139D0000 0x1000>;
-			interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
-				     <0 107 0>, <0 108 0>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			#pwm-cells = <3>;
 			status = "disabled";
 		};
 
 		pmu {
 			compatible = "arm,cortex-a7-pmu";
-			interrupts = <0 18 0>, <0 19 0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		ppmu_dmc0: ppmu_dmc0@106a0000 {
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 5f034eb..c64737b 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -21,6 +21,8 @@
 
 #include <dt-bindings/clock/exynos4.h>
 #include <dt-bindings/clock/exynos-audss-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include "exynos-syscon-restart.dtsi"
 
 / {
@@ -78,6 +80,11 @@
 		reg = <0x10000000 0x100>;
 	};
 
+	scu: snoop-control-unit@10500000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x10500000 0x2000>;
+	};
+
 	memory-controller@12570000 {
 		compatible = "samsung,exynos4210-srom";
 		reg = <0x12570000 0x14>;
@@ -168,7 +175,7 @@
 	dsi_0: dsi@11C80000 {
 		compatible = "samsung,exynos4210-mipi-dsi";
 		reg = <0x11C80000 0x10000>;
-		interrupts = <0 79 0>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&pd_lcd0>;
 		phys = <&mipi_phy 1>;
 		phy-names = "dsim";
@@ -191,7 +198,7 @@
 		fimc_0: fimc@11800000 {
 			compatible = "samsung,exynos4210-fimc";
 			reg = <0x11800000 0x1000>;
-			interrupts = <0 84 0>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>;
 			clock-names = "fimc", "sclk_fimc";
 			power-domains = <&pd_cam>;
@@ -203,7 +210,7 @@
 		fimc_1: fimc@11810000 {
 			compatible = "samsung,exynos4210-fimc";
 			reg = <0x11810000 0x1000>;
-			interrupts = <0 85 0>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_FIMC1>, <&clock CLK_SCLK_FIMC1>;
 			clock-names = "fimc", "sclk_fimc";
 			power-domains = <&pd_cam>;
@@ -215,7 +222,7 @@
 		fimc_2: fimc@11820000 {
 			compatible = "samsung,exynos4210-fimc";
 			reg = <0x11820000 0x1000>;
-			interrupts = <0 86 0>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_FIMC2>, <&clock CLK_SCLK_FIMC2>;
 			clock-names = "fimc", "sclk_fimc";
 			power-domains = <&pd_cam>;
@@ -227,7 +234,7 @@
 		fimc_3: fimc@11830000 {
 			compatible = "samsung,exynos4210-fimc";
 			reg = <0x11830000 0x1000>;
-			interrupts = <0 87 0>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_FIMC3>, <&clock CLK_SCLK_FIMC3>;
 			clock-names = "fimc", "sclk_fimc";
 			power-domains = <&pd_cam>;
@@ -239,7 +246,7 @@
 		csis_0: csis@11880000 {
 			compatible = "samsung,exynos4210-csis";
 			reg = <0x11880000 0x4000>;
-			interrupts = <0 78 0>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>;
 			clock-names = "csis", "sclk_csis";
 			bus-width = <4>;
@@ -254,7 +261,7 @@
 		csis_1: csis@11890000 {
 			compatible = "samsung,exynos4210-csis";
 			reg = <0x11890000 0x4000>;
-			interrupts = <0 80 0>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_CSIS1>, <&clock CLK_SCLK_CSIS1>;
 			clock-names = "csis", "sclk_csis";
 			bus-width = <2>;
@@ -270,7 +277,7 @@
 	watchdog: watchdog@10060000 {
 		compatible = "samsung,s3c2410-wdt";
 		reg = <0x10060000 0x100>;
-		interrupts = <0 43 0>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_WDT>;
 		clock-names = "watchdog";
 		status = "disabled";
@@ -280,7 +287,8 @@
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x10070000 0x100>;
 		interrupt-parent = <&pmu_system_controller>;
-		interrupts = <0 44 0>, <0 45 0>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_RTC>;
 		clock-names = "rtc";
 		status = "disabled";
@@ -289,7 +297,7 @@
 	keypad: keypad@100A0000 {
 		compatible = "samsung,s5pv210-keypad";
 		reg = <0x100A0000 0x100>;
-		interrupts = <0 109 0>;
+		interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_KEYIF>;
 		clock-names = "keypad";
 		status = "disabled";
@@ -298,7 +306,7 @@
 	sdhci_0: sdhci@12510000 {
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12510000 0x100>;
-		interrupts = <0 73 0>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
 		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
@@ -307,7 +315,7 @@
 	sdhci_1: sdhci@12520000 {
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12520000 0x100>;
-		interrupts = <0 74 0>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
 		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
@@ -316,7 +324,7 @@
 	sdhci_2: sdhci@12530000 {
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12530000 0x100>;
-		interrupts = <0 75 0>;
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
 		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
@@ -325,7 +333,7 @@
 	sdhci_3: sdhci@12540000 {
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12540000 0x100>;
-		interrupts = <0 76 0>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
 		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
@@ -344,7 +352,7 @@
 	hsotg: hsotg@12480000 {
 		compatible = "samsung,s3c6400-hsotg";
 		reg = <0x12480000 0x20000>;
-		interrupts = <0 71 0>;
+		interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_USB_DEVICE>;
 		clock-names = "otg";
 		phys = <&exynos_usbphy 0>;
@@ -355,7 +363,7 @@
 	ehci: ehci@12580000 {
 		compatible = "samsung,exynos4210-ehci";
 		reg = <0x12580000 0x100>;
-		interrupts = <0 70 0>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_USB_HOST>;
 		clock-names = "usbhost";
 		status = "disabled";
@@ -381,7 +389,7 @@
 	ohci: ohci@12590000 {
 		compatible = "samsung,exynos4210-ohci";
 		reg = <0x12590000 0x100>;
-		interrupts = <0 70 0>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_USB_HOST>;
 		clock-names = "usbhost";
 		status = "disabled";
@@ -423,7 +431,7 @@
 	mfc: codec@13400000 {
 		compatible = "samsung,mfc-v5";
 		reg = <0x13400000 0x10000>;
-		interrupts = <0 94 0>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&pd_mfc>;
 		clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>;
 		clock-names = "mfc", "sclk_mfc";
@@ -434,7 +442,7 @@
 	serial_0: serial@13800000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13800000 0x100>;
-		interrupts = <0 52 0>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
 		clock-names = "uart", "clk_uart_baud0";
 		dmas = <&pdma0 15>, <&pdma0 16>;
@@ -445,7 +453,7 @@
 	serial_1: serial@13810000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13810000 0x100>;
-		interrupts = <0 53 0>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
 		clock-names = "uart", "clk_uart_baud0";
 		dmas = <&pdma1 15>, <&pdma1 16>;
@@ -456,7 +464,7 @@
 	serial_2: serial@13820000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13820000 0x100>;
-		interrupts = <0 54 0>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
 		clock-names = "uart", "clk_uart_baud0";
 		dmas = <&pdma0 17>, <&pdma0 18>;
@@ -467,7 +475,7 @@
 	serial_3: serial@13830000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13830000 0x100>;
-		interrupts = <0 55 0>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
 		clock-names = "uart", "clk_uart_baud0";
 		dmas = <&pdma1 17>, <&pdma1 18>;
@@ -480,7 +488,7 @@
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13860000 0x100>;
-		interrupts = <0 58 0>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_I2C0>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
@@ -493,7 +501,7 @@
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13870000 0x100>;
-		interrupts = <0 59 0>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_I2C1>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
@@ -506,7 +514,7 @@
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13880000 0x100>;
-		interrupts = <0 60 0>;
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_I2C2>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
@@ -519,7 +527,7 @@
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13890000 0x100>;
-		interrupts = <0 61 0>;
+		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_I2C3>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
@@ -532,7 +540,7 @@
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138A0000 0x100>;
-		interrupts = <0 62 0>;
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_I2C4>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
@@ -545,7 +553,7 @@
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138B0000 0x100>;
-		interrupts = <0 63 0>;
+		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_I2C5>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
@@ -558,7 +566,7 @@
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138C0000 0x100>;
-		interrupts = <0 64 0>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_I2C6>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
@@ -571,7 +579,7 @@
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138D0000 0x100>;
-		interrupts = <0 65 0>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_I2C7>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
@@ -584,7 +592,7 @@
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-hdmiphy-i2c";
 		reg = <0x138E0000 0x100>;
-		interrupts = <0 93 0>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_I2C_HDMI>;
 		clock-names = "i2c";
 		status = "disabled";
@@ -598,7 +606,7 @@
 	spi_0: spi@13920000 {
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x13920000 0x100>;
-		interrupts = <0 66 0>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 		dmas = <&pdma0 7>, <&pdma0 6>;
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
@@ -613,7 +621,7 @@
 	spi_1: spi@13930000 {
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x13930000 0x100>;
-		interrupts = <0 67 0>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 		dmas = <&pdma1 7>, <&pdma1 6>;
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
@@ -628,7 +636,7 @@
 	spi_2: spi@13940000 {
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x13940000 0x100>;
-		interrupts = <0 68 0>;
+		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 		dmas = <&pdma0 9>, <&pdma0 8>;
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
@@ -643,7 +651,11 @@
 	pwm: pwm@139D0000 {
 		compatible = "samsung,exynos4210-pwm";
 		reg = <0x139D0000 0x1000>;
-		interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_PWM>;
 		clock-names = "timers";
 		#pwm-cells = <3>;
@@ -660,7 +672,7 @@
 		pdma0: pdma@12680000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12680000 0x1000>;
-			interrupts = <0 35 0>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
@@ -671,7 +683,7 @@
 		pdma1: pdma@12690000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12690000 0x1000>;
-			interrupts = <0 36 0>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
@@ -682,7 +694,7 @@
 		mdma1: mdma@12850000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12850000 0x1000>;
-			interrupts = <0 34 0>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_MDMA>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
@@ -712,7 +724,7 @@
 	jpeg_codec: jpeg-codec@11840000 {
 		compatible = "samsung,exynos4210-jpeg";
 		reg = <0x11840000 0x1000>;
-		interrupts = <0 88 0>;
+		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_JPEG>;
 		clock-names = "jpeg";
 		power-domains = <&pd_cam>;
@@ -722,7 +734,7 @@
 	rotator: rotator@12810000 {
 		compatible = "samsung,exynos4210-rotator";
 		reg = <0x12810000 0x64>;
-		interrupts = <0 83 0>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_ROTATOR>;
 		clock-names = "rotator";
 		iommus = <&sysmmu_rotator>;
@@ -731,7 +743,7 @@
 	hdmi: hdmi@12D00000 {
 		compatible = "samsung,exynos4210-hdmi";
 		reg = <0x12D00000 0x70000>;
-		interrupts = <0 92 0>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy",
 			"mout_hdmi";
 		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
@@ -746,7 +758,7 @@
 	hdmicec: cec@100B0000 {
 		compatible = "samsung,s5p-cec";
 		reg = <0x100B0000 0x200>;
-		interrupts = <0 114 0>;
+		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_HDMI_CEC>;
 		clock-names = "hdmicec";
 		samsung,syscon-phandle = <&pmu_system_controller>;
@@ -757,7 +769,7 @@
 
 	mixer: mixer@12C10000 {
 		compatible = "samsung,exynos4210-mixer";
-		interrupts = <0 91 0>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x12C10000 0x2100>, <0x12c00000 0x300>;
 		power-domains = <&pd_tv>;
 		iommus = <&sysmmu_tv>;
@@ -984,7 +996,7 @@
 	sss: sss@10830000 {
 		compatible = "samsung,exynos4210-secss";
 		reg = <0x10830000 0x300>;
-		interrupts = <0 112 0>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_SSS>;
 		clock-names = "secss";
 	};
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
index d9b6d25..f280954 100644
--- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
@@ -537,8 +537,14 @@
 
 			interrupt-controller;
 			interrupt-parent = <&gic>;
-			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			#interrupt-cells = <2>;
 		};
 
@@ -548,8 +554,14 @@
 
 			interrupt-controller;
 			interrupt-parent = <&gic>;
-			interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-				     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 			#interrupt-cells = <2>;
 		};
 
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 2d9b029..7f3a18c 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -109,12 +109,12 @@
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = <0 &gic 0 57 0>,
-					<1 &gic 0 69 0>,
+			interrupt-map = <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>,
+					<1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>,
 					<2 &combiner 12 6>,
 					<3 &combiner 12 7>,
-					<4 &gic 0 42 0>,
-					<5 &gic 0 48 0>;
+					<4 &gic 0 42 IRQ_TYPE_LEVEL_HIGH>,
+					<5 &gic 0 48 IRQ_TYPE_LEVEL_HIGH>;
 		};
 	};
 
@@ -127,18 +127,18 @@
 	pinctrl_0: pinctrl@11400000 {
 		compatible = "samsung,exynos4210-pinctrl";
 		reg = <0x11400000 0x1000>;
-		interrupts = <0 47 0>;
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	pinctrl_1: pinctrl@11000000 {
 		compatible = "samsung,exynos4210-pinctrl";
 		reg = <0x11000000 0x1000>;
-		interrupts = <0 46 0>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 
 		wakup_eint: wakeup-interrupt-controller {
 			compatible = "samsung,exynos4210-wakeup-eint";
 			interrupt-parent = <&gic>;
-			interrupts = <0 32 0>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		};
 	};
 
@@ -182,7 +182,7 @@
 	g2d: g2d@12800000 {
 		compatible = "samsung,s5pv210-g2d";
 		reg = <0x12800000 0x1000>;
-		interrupts = <0 89 0>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
 		clock-names = "sclk_fimg2d", "fimg2d";
 		power-domains = <&pd_lcd0>;
@@ -424,10 +424,22 @@
 
 &combiner {
 	samsung,combiner-nr = <16>;
-	interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-		     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-		     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-		     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
+	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 &mdma1 {
diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts
new file mode 100644
index 0000000..76d87f3
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts
@@ -0,0 +1,240 @@
+/*
+ * TOPEET's Exynos4412 based itop board device tree source
+ *
+ * Copyright (c) 2016 SUMOMO Computer Association
+ *			https://www.sumomo.mobi
+ *			Randy Li <ayaka@soulik.info>
+ *
+ * Device tree source file for TOPEET iTop Exynos 4412 core board
+ * which is based on Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/sound/samsung-i2s.h>
+#include "exynos4412-itop-scp-core.dtsi"
+
+/ {
+	model = "TOPEET iTop 4412 Elite board based on Exynos4412";
+	compatible = "topeet,itop4412-elite", "samsung,exynos4412", "samsung,exynos4";
+
+	chosen {
+		bootargs = "root=/dev/mmcblk0p2 rw rootfstype=ext4 rootdelay=1 rootwait";
+		stdout-path = "serial2:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led2 {
+			label = "red:system";
+			gpios = <&gpx1 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led3 {
+			label = "red:user";
+			gpios = <&gpk1 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		home {
+			label = "GPIO Key Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpx1 1 GPIO_ACTIVE_LOW>;
+		};
+
+		back {
+			label = "GPIO Key Back";
+			linux,code = <KEY_BACK>;
+			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
+		};
+
+		sleep {
+			label = "GPIO Key Sleep";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
+		};
+
+		vol-up {
+			label = "GPIO Key Vol+";
+			linux,code = <KEY_UP>;
+			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
+		};
+
+		vol-down {
+			label = "GPIO Key Vol-";
+			linux,code = <KEY_DOWN>;
+			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "wm-sound";
+
+		assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
+				<&clock_audss EXYNOS_MOUT_I2S>,
+				<&clock_audss EXYNOS_DOUT_SRP>,
+				<&clock_audss EXYNOS_DOUT_AUD_BUS>;
+		assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
+				<&clock_audss EXYNOS_MOUT_AUDSS>;
+		assigned-clock-rates = <0>,
+				<0>,
+				<112896000>,
+				<11289600>;
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&link0_codec>;
+		simple-audio-card,frame-master = <&link0_codec>;
+
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Speaker", "Speaker",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack", "HP_L",
+			"Headphone Jack", "HP_R",
+			"Speaker", "SPK_LP",
+			"Speaker", "SPK_LN",
+			"Speaker", "SPK_RP",
+			"Speaker", "SPK_RN",
+			"LINPUT1", "Mic Jack",
+			"LINPUT3", "Mic Jack",
+			"RINPUT1", "Mic Jack",
+			"RINPUT2", "Mic Jack";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0 0>;
+		};
+
+		link0_codec: simple-audio-card,codec {
+			sound-dai = <&codec>;
+			clocks = <&i2s0 CLK_I2S_CDCLK>;
+			system-clock-frequency = <11289600>;
+		};
+	};
+
+	beep {
+		compatible = "pwm-beeper";
+		pwms = <&pwm 0 4000000 PWM_POLARITY_INVERTED>;
+	};
+
+	camera: camera {
+		pinctrl-0 = <&cam_port_a_clk_active>;
+		pinctrl-names = "default";
+		status = "okay";
+		assigned-clocks = <&clock CLK_MOUT_CAM0>;
+		assigned-clock-parents = <&clock CLK_XUSBXTI>;
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo3_reg>;
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+	/* In order to reset USB ethernet */
+	samsung,vbus-gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
+
+	port@0 {
+		status = "okay";
+	};
+
+	port@2 {
+		status = "okay";
+	};
+};
+
+&exynos_usbphy {
+	status = "okay";
+};
+
+&fimc_0 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC0>,
+			<&clock CLK_SCLK_FIMC0>;
+	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+	assigned-clock-rates = <0>, <176000000>;
+};
+
+&hsotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&i2c_4 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	pinctrl-0 = <&i2c4_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	codec: wm8960@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		clocks = <&pmu_system_controller 0>;
+		clock-names = "MCLK1";
+		wlf,shared-lrclk;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2s0 {
+	pinctrl-0 = <&i2s0_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+	clocks = <&clock_audss EXYNOS_I2S_BUS>,
+		 <&clock_audss EXYNOS_DOUT_AUD_BUS>,
+		 <&clock_audss EXYNOS_SCLK_I2S>;
+	clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+};
+
+&pinctrl_1 {
+	ether-reset {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pwm {
+	status = "okay";
+	pinctrl-0 = <&pwm0_out>;
+	pinctrl-names = "default";
+	samsung,pwm-outputs = <0>;
+};
+
+&sdhci_2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+	pinctrl-names = "default";
+	cd-gpio = <&gpx0 7 GPIO_ACTIVE_LOW>;
+	cap-sd-highspeed;
+	vmmc-supply = <&ldo23_reg>;
+	vqmmc-supply = <&ldo17_reg>;
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
new file mode 100644
index 0000000..a36cd36
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
@@ -0,0 +1,501 @@
+/*
+ * TOPEET's Exynos4412 based itop board device tree source
+ *
+ * Copyright (c) 2016 SUMOMO Computer Association
+ *			https://www.sumomo.mobi
+ *			Randy Li <ayaka@soulik.info>
+ *
+ * Device tree source file for TOPEET iTop Exynos 4412 SCP package core
+ * board which is based on Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "exynos4412.dtsi"
+#include "exynos4412-ppmu-common.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
+
+/ {
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	firmware@0203F000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0203F000 0x1000>;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+				     /* Corresponds to 800MHz at freq_table */
+				     cooling-device = <&cpu0 7 7>;
+				};
+				map1 {
+				     /* Corresponds to 200MHz at freq_table */
+				     cooling-device = <&cpu0 13 13>;
+			       };
+		       };
+		};
+	};
+
+	usb-hub {
+		compatible = "smsc,usb3503a";
+		reset-gpios = <&gpm2 4 GPIO_ACTIVE_LOW>;
+		connect-gpios = <&gpm3 3 GPIO_ACTIVE_HIGH>;
+		intn-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hsic_reset>;
+	};
+};
+
+&bus_dmc {
+	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+	vdd-supply = <&buck1_reg>;
+	status = "okay";
+};
+
+&bus_acp {
+	devfreq = <&bus_dmc>;
+	status = "okay";
+};
+
+&bus_c2c {
+	devfreq = <&bus_dmc>;
+	status = "okay";
+};
+
+&bus_leftbus {
+	devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
+	vdd-supply = <&buck3_reg>;
+	status = "okay";
+};
+
+&bus_rightbus {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_fsys {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_peri {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_mfc {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&hsotg {
+	vusb_d-supply = <&ldo15_reg>;
+	vusb_a-supply = <&ldo12_reg>;
+};
+
+&i2c_1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+	pinctrl-0 = <&i2c1_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	s5m8767: s5m8767-pmic@66 {
+		compatible = "samsung,s5m8767-pmic";
+		reg = <0x66>;
+
+		s5m8767,pmic-buck-default-dvs-idx = <3>;
+
+		s5m8767,pmic-buck-dvs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>,
+						 <&gpb 6 GPIO_ACTIVE_HIGH>,
+						 <&gpb 7 GPIO_ACTIVE_HIGH>;
+
+		s5m8767,pmic-buck-ds-gpios = <&gpm3 5 GPIO_ACTIVE_HIGH>,
+						<&gpm3 6 GPIO_ACTIVE_HIGH>,
+						<&gpm3 7 GPIO_ACTIVE_HIGH>;
+
+		/* VDD_ARM */
+		s5m8767,pmic-buck2-dvs-voltage = <1356250>, <1300000>,
+						 <1243750>, <1118750>,
+						 <1068750>, <1012500>,
+						 <956250>, <900000>;
+		/* VDD_INT */
+		s5m8767,pmic-buck3-dvs-voltage = <1000000>, <1000000>,
+						 <925000>, <925000>,
+						 <887500>, <887500>,
+						 <850000>, <850000>;
+		/* VDD_G3D */
+		s5m8767,pmic-buck4-dvs-voltage = <1081250>, <1081250>,
+						 <1025000>, <950000>,
+						 <918750>, <900000>,
+						 <875000>, <831250>;
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ALIVE";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			/* SCP uses 1.5v, POP uses 1.2v */
+			ldo2_reg: LDO2 {
+				regulator-name = "VDDQ_M12";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VDDIOAP_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VDDQ_PRE";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VDD_LDO5";
+				op_mode = <0>; /* Always off Mode */
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VDD10_MPLL";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VDD10_XPLL";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VDD10_MIPI";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "VDD33_LCD";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VDD18_MIPI";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "VDD18_ABB1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "VDD33_UOTG";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VDDIOPERI_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "VDD18_ABB02";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VDD10_USH";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "VDD18_HSIC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "VDDIOAP_MMC012_28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			/* Used by HSIC */
+			ldo18_reg: LDO18 {
+				regulator-name = "VDDIOPERI_28";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "VDD_LDO19";
+				op_mode = <0>; /* Always off Mode */
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "VDD28_CAM";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "VDD28_AF";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "VDDA28_2M";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "VDD28_TF";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "VDD33_A31";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "VDD18_CAM";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "VDD18_A31";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "GPS_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo28_reg: LDO28 {
+				regulator-name = "DVDD12";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt	= <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt	= <1456250>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <875000>;
+				regulator-max-microvolt	= <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt	= <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "vdd_m12";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt	= <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "vdd12_5m";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt	= <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "pvdd_buck7";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt	= <2000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "pvdd_buck8";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt	= <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "vddf28_emmc";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt	= <3000000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+		};
+
+		s5m8767_osc: clocks {
+			#clock-cells = <1>;
+			clock-output-names = "s5m8767_ap",
+					"s5m8767_cp", "s5m8767_bt";
+		};
+
+	};
+};
+
+&mfc {
+	status = "okay";
+};
+
+&mshc_0 {
+	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+	pinctrl-names = "default";
+	status = "okay";
+	vmmc-supply = <&buck9_reg>;
+	num-slots = <1>;
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+};
+
+&pinctrl_1 {
+	hsic_reset: hsic-reset {
+		samsung,pins = "gpm2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&tmu {
+	vtmu-supply = <&ldo16_reg>;
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 61906b3..153a75f 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -64,6 +64,11 @@
 	};
 };
 
+&adc {
+	vdd-supply = <&ldo10_reg>;
+	status = "okay";
+};
+
 /* VDDQ for MSHC (eMMC card) */
 &buck8_reg {
 	regulator-name = "BUCK8_VDDQ_MMC4_2.8V";
diff --git a/arch/arm/boot/dts/exynos4415-pinctrl.dtsi b/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
deleted file mode 100644
index 76cfd87..0000000
--- a/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
+++ /dev/null
@@ -1,575 +0,0 @@
-/*
- * Samsung's Exynos4415 SoCs pin-mux and pin-config device tree source
- *
- * Copyright (c) 2014 Samsung Electronics Co., Ltd.
- *
- * Samsung's Exynos4415 SoCs pin-mux and pin-config optiosn are listed as device
- * tree nodes are listed in this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <dt-bindings/pinctrl/samsung.h>
-
-&pinctrl_0 {
-	gpa0: gpa0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpa1: gpa1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb: gpb {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc0: gpc0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc1: gpc1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd0: gpd0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd1: gpd1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf0: gpf0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf1: gpf1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf2: gpf2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	uart0_data: uart0-data {
-		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart0_fctl: uart0-fctl {
-		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart1_data: uart1-data {
-		samsung,pins = "gpa0-4", "gpa0-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart1_fctl: uart1-fctl {
-		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart2_data: uart2-data {
-		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart2_fctl: uart2-fctl {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart3_data: uart3-data {
-		samsung,pins = "gpa1-4", "gpa1-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c2_bus: i2c2-bus {
-		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c3_bus: i2c3-bus {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	spi0_bus: spi0-bus {
-		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c4_bus: i2c4-bus {
-		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	spi1_bus: spi1-bus {
-		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c5_bus: i2c5-bus {
-		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2s1_bus: i2s1-bus {
-		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-				"gpc0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2s2_bus: i2s2-bus {
-		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-				"gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pcm2_bus: pcm2-bus {
-		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-				"gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c6_bus: i2c6-bus {
-		samsung,pins = "gpc1-3", "gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	spi2_bus: spi2-bus {
-		samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm0_out: pwm0-out {
-		samsung,pins = "gpd0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm1_out: pwm1-out {
-		samsung,pins = "gpd0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm2_out: pwm2-out {
-		samsung,pins = "gpd0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm3_out: pwm3-out {
-		samsung,pins = "gpd0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c7_bus: i2c7-bus {
-		samsung,pins = "gpd0-2", "gpd0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c0_bus: i2c0-bus {
-		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c1_bus: i2c1-bus {
-		samsung,pins = "gpd1-2", "gpd1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
-
-&pinctrl_1 {
-	gpk0: gpk0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk1: gpk1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk2: gpk2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk3: gpk3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpl0: gpl0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm0: gpm0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm1: gpm1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm2: gpm2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm3: gpm3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm4: gpm4 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpx0: gpx0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		interrupt-parent = <&gic>;
-		interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>,
-				<0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>;
-		#interrupt-cells = <2>;
-	};
-
-	gpx1: gpx1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		interrupt-parent = <&gic>;
-		interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>,
-				<0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>;
-		#interrupt-cells = <2>;
-	};
-
-	gpx2: gpx2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpx3: gpx3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	sd0_clk: sd0-clk {
-		samsung,pins = "gpk0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_cmd: sd0-cmd {
-		samsung,pins = "gpk0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_cd: sd0-cd {
-		samsung,pins = "gpk0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_rdqs: sd0-rdqs {
-		samsung,pins = "gpk0-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_bus1: sd0-bus-width1 {
-		samsung,pins = "gpk0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_bus4: sd0-bus-width4 {
-		samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_bus8: sd0-bus-width8 {
-		samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_clk: sd1-clk {
-		samsung,pins = "gpk1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_cmd: sd1-cmd {
-		samsung,pins = "gpk1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_cd: sd1-cd {
-		samsung,pins = "gpk1-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_bus1: sd1-bus-width1 {
-		samsung,pins = "gpk1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_bus4: sd1-bus-width4 {
-		samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_clk: sd2-clk {
-		samsung,pins = "gpk2-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_cmd: sd2-cmd {
-		samsung,pins = "gpk2-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_cd: sd2-cd {
-		samsung,pins = "gpk2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_bus1: sd2-bus-width1 {
-		samsung,pins = "gpk2-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_bus4: sd2-bus-width4 {
-		samsung,pins = "gpk2-4", "gpk2-5", "gpk2-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	cam_port_b_io: cam-port-b-io {
-		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
-				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
-				"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	cam_port_b_clk_active: cam-port-b-clk-active {
-		samsung,pins = "gpm2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	cam_port_b_clk_idle: cam-port-b-clk-idle {
-		samsung,pins = "gpm2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	fimc_is_i2c0: fimc-is-i2c0 {
-		samsung,pins = "gpm4-0", "gpm4-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	fimc_is_i2c1: fimc-is-i2c1 {
-		samsung,pins = "gpm4-2", "gpm4-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	fimc_is_uart: fimc-is-uart {
-		samsung,pins = "gpm3-5", "gpm3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
-
-&pinctrl_2 {
-	gpz: gpz {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	i2s0_bus: i2s0-bus {
-		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-				"gpz-4", "gpz-5", "gpz-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
diff --git a/arch/arm/boot/dts/exynos4415.dtsi b/arch/arm/boot/dts/exynos4415.dtsi
deleted file mode 100644
index 3c40f8a..0000000
--- a/arch/arm/boot/dts/exynos4415.dtsi
+++ /dev/null
@@ -1,650 +0,0 @@
-/*
- * Samsung's Exynos4415 SoC device tree source
- *
- * Copyright (c) 2014 Samsung Electronics Co., Ltd.
- *
- * Samsung's Exynos4415 SoC device nodes are listed in this file. Exynos4415
- * based board files can include this file and provide values for board
- * specific bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * Exynos4415 SoC. As device tree coverage for Exynos4415 increases, additional
- * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <dt-bindings/clock/exynos4415.h>
-#include <dt-bindings/clock/exynos-audss-clk.h>
-
-/ {
-	compatible = "samsung,exynos4415";
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-		mshc0 = &mshc_0;
-		mshc1 = &mshc_1;
-		mshc2 = &mshc_2;
-		spi0 = &spi_0;
-		spi1 = &spi_1;
-		spi2 = &spi_2;
-		i2c0 = &i2c_0;
-		i2c1 = &i2c_1;
-		i2c2 = &i2c_2;
-		i2c3 = &i2c_3;
-		i2c4 = &i2c_4;
-		i2c5 = &i2c_5;
-		i2c6 = &i2c_6;
-		i2c7 = &i2c_7;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@a00 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xa00>;
-			clock-frequency = <1600000000>;
-		};
-
-		cpu1: cpu@a01 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xa01>;
-			clock-frequency = <1600000000>;
-		};
-
-		cpu2: cpu@a02 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xa02>;
-			clock-frequency = <1600000000>;
-		};
-
-		cpu3: cpu@a03 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xa03>;
-			clock-frequency = <1600000000>;
-		};
-	};
-
-	soc: soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		sysram@02020000 {
-			compatible = "mmio-sram";
-			reg = <0x02020000 0x50000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x02020000 0x50000>;
-
-			smp-sysram@0 {
-				compatible = "samsung,exynos4210-sysram";
-				reg = <0x0 0x1000>;
-			};
-
-			smp-sysram@4f000 {
-				compatible = "samsung,exynos4210-sysram-ns";
-				reg = <0x4f000 0x1000>;
-			};
-		};
-
-		pinctrl_2: pinctrl@03860000 {
-			compatible = "samsung,exynos4415-pinctrl";
-			reg = <0x03860000 0x1000>;
-			interrupts = <0 242 0>;
-		};
-
-		chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
-			reg = <0x10000000 0x100>;
-		};
-
-		sysreg_system_controller: syscon@10010000 {
-			compatible = "samsung,exynos4-sysreg", "syscon";
-			reg = <0x10010000 0x400>;
-		};
-
-		pmu_system_controller: system-controller@10020000 {
-			compatible = "samsung,exynos4415-pmu", "syscon";
-			reg = <0x10020000 0x4000>;
-		};
-
-		mipi_phy: video-phy@10020710 {
-			compatible = "samsung,s5pv210-mipi-video-phy";
-			#phy-cells = <1>;
-			syscon = <&pmu_system_controller>;
-		};
-
-		pd_cam: cam-power-domain@10024000 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10024000 0x20>;
-			#power-domain-cells = <0>;
-		};
-
-		pd_tv: tv-power-domain@10024020 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10024020 0x20>;
-			#power-domain-cells = <0>;
-		};
-
-		pd_mfc: mfc-power-domain@10024040 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10024040 0x20>;
-			#power-domain-cells = <0>;
-		};
-
-		pd_g3d: g3d-power-domain@10024060 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10024060 0x20>;
-			#power-domain-cells = <0>;
-		};
-
-		pd_lcd0: lcd0-power-domain@10024080 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10024080 0x20>;
-			#power-domain-cells = <0>;
-		};
-
-		pd_isp0: isp0-power-domain@100240A0 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x100240A0 0x20>;
-			#power-domain-cells = <0>;
-		};
-
-		pd_isp1: isp1-power-domain@100240E0 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x100240E0 0x20>;
-			#power-domain-cells = <0>;
-		};
-
-		cmu: clock-controller@10030000 {
-			compatible = "samsung,exynos4415-cmu";
-			reg = <0x10030000 0x18000>;
-			#clock-cells = <1>;
-		};
-
-		rtc: rtc@10070000 {
-			compatible = "samsung,s3c6410-rtc";
-			reg = <0x10070000 0x100>;
-			interrupts = <0 73 0>, <0 74 0>;
-			status = "disabled";
-		};
-
-		mct@10050000 {
-			compatible = "samsung,exynos4210-mct";
-			reg = <0x10050000 0x800>;
-			interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>,
-				     <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>;
-			clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
-			clock-names = "fin_pll", "mct";
-		};
-
-		gic: interrupt-controller@10481000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x10481000 0x1000>,
-			      <0x10482000 0x1000>,
-			      <0x10484000 0x2000>,
-			      <0x10486000 0x2000>;
-			interrupts = <1 9 0xf04>;
-		};
-
-		l2c: l2-cache-controller@10502000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x10502000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-			arm,tag-latency = <2 2 1>;
-			arm,data-latency = <3 2 1>;
-			arm,double-linefill = <1>;
-			arm,double-linefill-incr = <0>;
-			arm,double-linefill-wrap = <1>;
-			arm,prefetch-drop = <1>;
-			arm,prefetch-offset = <7>;
-		};
-
-		cmu_dmc: clock-controller@105C0000 {
-			compatible = "samsung,exynos4415-cmu-dmc";
-			reg = <0x105C0000 0x3000>;
-			#clock-cells = <1>;
-		};
-
-		pinctrl_1: pinctrl@11000000 {
-			compatible = "samsung,exynos4415-pinctrl";
-			reg = <0x11000000 0x1000>;
-			interrupts = <0 225 0>;
-
-			wakeup-interrupt-controller {
-				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupt-parent = <&gic>;
-				interrupts = <0 48 0>;
-			};
-		};
-
-		pinctrl_0: pinctrl@11400000 {
-			compatible = "samsung,exynos4415-pinctrl";
-			reg = <0x11400000 0x1000>;
-			interrupts = <0 240 0>;
-		};
-
-		fimd: fimd@11C00000 {
-			compatible = "samsung,exynos4415-fimd";
-			reg = <0x11C00000 0x30000>;
-			interrupt-names = "fifo", "vsync", "lcd_sys";
-			interrupts = <0 84 0>, <0 85 0>, <0 86 0>;
-			clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>;
-			clock-names = "sclk_fimd", "fimd";
-			samsung,power-domain = <&pd_lcd0>;
-			iommus = <&sysmmu_fimd0>;
-			samsung,sysreg = <&sysreg_system_controller>;
-			status = "disabled";
-		};
-
-		dsi_0: dsi@11C80000 {
-			compatible = "samsung,exynos4415-mipi-dsi";
-			reg = <0x11C80000 0x10000>;
-			interrupts = <0 83 0>;
-			samsung,phy-type = <0>;
-			samsung,power-domain = <&pd_lcd0>;
-			phys = <&mipi_phy 1>;
-			phy-names = "dsim";
-			clocks = <&cmu CLK_DSIM0>, <&cmu CLK_SCLK_MIPI0>;
-			clock-names = "bus_clk", "pll_clk";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		sysmmu_fimd0: sysmmu@11E20000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11e20000 0x1000>;
-			interrupts = <0 80 0>, <0 81 0>;
-			clock-names = "sysmmu", "master";
-			clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>;
-			power-domains = <&pd_lcd0>;
-			#iommu-cells = <0>;
-		};
-
-		hsotg: hsotg@12480000 {
-			compatible = "samsung,s3c6400-hsotg";
-			reg = <0x12480000 0x20000>;
-			interrupts = <0 141 0>;
-			clocks = <&cmu CLK_USBDEVICE>;
-			clock-names = "otg";
-			phys = <&exynos_usbphy 0>;
-			phy-names = "usb2-phy";
-			status = "disabled";
-		};
-
-		mshc_0: mshc@12510000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12510000 0x1000>;
-			interrupts = <0 142 0>;
-			clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		mshc_1: mshc@12520000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12520000 0x1000>;
-			interrupts = <0 143 0>;
-			clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		mshc_2: mshc@12530000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12530000 0x1000>;
-			interrupts = <0 144 0>;
-			clocks = <&cmu CLK_SDMMC2>, <&cmu CLK_SCLK_MMC2>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		ehci: ehci@12580000 {
-			compatible = "samsung,exynos4210-ehci";
-			reg = <0x12580000 0x100>;
-			interrupts = <0 140 0>;
-			clocks = <&cmu CLK_USBHOST>;
-			clock-names = "usbhost";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-				phys = <&exynos_usbphy 1>;
-				status = "disabled";
-			};
-			port@1 {
-				reg = <1>;
-				phys = <&exynos_usbphy 2>;
-				status = "disabled";
-			};
-			port@2 {
-				reg = <2>;
-				phys = <&exynos_usbphy 3>;
-				status = "disabled";
-			};
-		};
-
-		ohci: ohci@12590000 {
-			compatible = "samsung,exynos4210-ohci";
-			reg = <0x12590000 0x100>;
-			interrupts = <0 140 0>;
-			clocks = <&cmu CLK_USBHOST>;
-			clock-names = "usbhost";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-				phys = <&exynos_usbphy 1>;
-				status = "disabled";
-			};
-		};
-
-		exynos_usbphy: exynos-usbphy@125B0000 {
-			compatible = "samsung,exynos4x12-usb2-phy";
-			reg = <0x125B0000 0x100>;
-			samsung,pmureg-phandle = <&pmu_system_controller>;
-			samsung,sysreg-phandle = <&sysreg_system_controller>;
-			clocks = <&cmu CLK_USBDEVICE>, <&xusbxti>;
-			clock-names = "phy", "ref";
-			#phy-cells = <1>;
-			status = "disabled";
-		};
-
-		amba {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			interrupt-parent = <&gic>;
-			ranges;
-
-			pdma0: pdma@12680000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x12680000 0x1000>;
-				interrupts = <0 138 0>;
-				clocks = <&cmu CLK_PDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-
-			pdma1: pdma@12690000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x12690000 0x1000>;
-				interrupts = <0 139 0>;
-				clocks = <&cmu CLK_PDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-		};
-
-		adc: adc@126C0000 {
-			compatible = "samsung,exynos3250-adc",
-				     "samsung,exynos-adc-v2";
-			reg = <0x126C0000 0x100>, <0x10020718 0x4>;
-			interrupts = <0 137 0>;
-			clock-names = "adc", "sclk";
-			clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
-			#io-channel-cells = <1>;
-			io-channel-ranges;
-			status = "disabled";
-		};
-
-		serial_0: serial@13800000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x13800000 0x100>;
-			interrupts = <0 109 0>;
-			clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		serial_1: serial@13810000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x13810000 0x100>;
-			interrupts = <0 110 0>;
-			clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		serial_2: serial@13820000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x13820000 0x100>;
-			interrupts = <0 111 0>;
-			clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		serial_3: serial@13830000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x13830000 0x100>;
-			interrupts = <0 112 0>;
-			clocks = <&cmu CLK_UART3>, <&cmu CLK_SCLK_UART3>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		i2c_0: i2c@13860000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x13860000 0x100>;
-			interrupts = <0 113 0>;
-			clocks = <&cmu CLK_I2C0>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_bus>;
-			status = "disabled";
-		};
-
-		i2c_1: i2c@13870000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x13870000 0x100>;
-			interrupts = <0 114 0>;
-			clocks = <&cmu CLK_I2C1>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_bus>;
-			status = "disabled";
-		};
-
-		i2c_2: i2c@13880000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x13880000 0x100>;
-			interrupts = <0 115 0>;
-			clocks = <&cmu CLK_I2C2>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_bus>;
-			status = "disabled";
-		};
-
-		i2c_3: i2c@13890000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x13890000 0x100>;
-			interrupts = <0 116 0>;
-			clocks = <&cmu CLK_I2C3>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c3_bus>;
-			status = "disabled";
-		};
-
-		i2c_4: i2c@138A0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138A0000 0x100>;
-			interrupts = <0 117 0>;
-			clocks = <&cmu CLK_I2C4>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c4_bus>;
-			status = "disabled";
-		};
-
-		i2c_5: i2c@138B0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138B0000 0x100>;
-			interrupts = <0 118 0>;
-			clocks = <&cmu CLK_I2C5>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c5_bus>;
-			status = "disabled";
-		};
-
-		i2c_6: i2c@138C0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138C0000 0x100>;
-			interrupts = <0 119 0>;
-			clocks = <&cmu CLK_I2C6>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c6_bus>;
-			status = "disabled";
-		};
-
-		i2c_7: i2c@138D0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138D0000 0x100>;
-			interrupts = <0 120 0>;
-			clocks = <&cmu CLK_I2C7>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c7_bus>;
-			status = "disabled";
-		};
-
-		spi_0: spi@13920000 {
-			compatible = "samsung,exynos4210-spi";
-			reg = <0x13920000 0x100>;
-			interrupts = <0 121 0>;
-			dmas = <&pdma0 7>, <&pdma0 6>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&cmu CLK_SPI0>, <&cmu CLK_SCLK_SPI0>;
-			clock-names = "spi", "spi_busclk0";
-			samsung,spi-src-clk = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi0_bus>;
-			status = "disabled";
-		};
-
-		spi_1: spi@13930000 {
-			compatible = "samsung,exynos4210-spi";
-			reg = <0x13930000 0x100>;
-			interrupts = <0 122 0>;
-			dmas = <&pdma1 7>, <&pdma1 6>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&cmu CLK_SPI1>, <&cmu CLK_SCLK_SPI1>;
-			clock-names = "spi", "spi_busclk0";
-			samsung,spi-src-clk = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi1_bus>;
-			status = "disabled";
-		};
-
-		spi_2: spi@13940000 {
-			compatible = "samsung,exynos4210-spi";
-			reg = <0x13940000 0x100>;
-			interrupts = <0 123 0>;
-			dmas = <&pdma0 9>, <&pdma0 8>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&cmu CLK_SPI2>, <&cmu CLK_SCLK_SPI2>;
-			clock-names = "spi", "spi_busclk0";
-			samsung,spi-src-clk = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi2_bus>;
-			status = "disabled";
-		};
-
-		clock_audss: clock-controller@03810000 {
-			compatible = "samsung,exynos4210-audss-clock";
-			reg = <0x03810000 0x0C>;
-			#clock-cells = <1>;
-		};
-
-		i2s0: i2s@3830000 {
-			compatible = "samsung,s5pv210-i2s";
-			reg = <0x03830000 0x100>;
-			interrupts = <0 124 0>;
-			clocks = <&clock_audss EXYNOS_I2S_BUS>,
-				<&clock_audss EXYNOS_SCLK_I2S>;
-			clock-names = "iis", "i2s_opclk0";
-			dmas = <&pdma1 10>, <&pdma1 9>, <&pdma1 8>;
-			dma-names = "tx", "rx", "tx-sec";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2s0_bus>;
-			samsung,idma-addr = <0x03000000>;
-			status = "disabled";
-		};
-
-		pwm: pwm@139D0000 {
-			compatible = "samsung,exynos4210-pwm";
-			reg = <0x139D0000 0x1000>;
-			interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
-				     <0 107 0>, <0 108 0>;
-			#pwm-cells = <3>;
-			status = "disabled";
-		};
-
-		pmu {
-			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 18 0>, <0 19 0>, <0 20 0>, <0 21 0>;
-		};
-	};
-};
-
-#include "exynos4415-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
index a56bf9b..2f866f6 100644
--- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -572,8 +572,14 @@
 
 			interrupt-controller;
 			interrupt-parent = <&gic>;
-			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			#interrupt-cells = <2>;
 		};
 
@@ -583,8 +589,14 @@
 
 			interrupt-controller;
 			interrupt-parent = <&gic>;
-			interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-				     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 			#interrupt-cells = <2>;
 		};
 
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index 3394bdc..85a7122 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -88,11 +88,11 @@
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = <0 &gic 0 57 0>,
+			interrupt-map = <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>,
 					<1 &combiner 12 5>,
 					<2 &combiner 12 6>,
 					<3 &combiner 12 7>,
-					<4 &gic 1 12 0>;
+					<4 &gic 1 12 IRQ_TYPE_LEVEL_HIGH>;
 		};
 	};
 
@@ -112,7 +112,7 @@
 	g2d: g2d@10800000 {
 		compatible = "samsung,exynos4212-g2d";
 		reg = <0x10800000 0x1000>;
-		interrupts = <0 89 0>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
 		clock-names = "sclk_fimg2d", "fimg2d";
 		iommus = <&sysmmu_g2d>;
@@ -127,7 +127,7 @@
 		fimc_lite_0: fimc-lite@12390000 {
 			compatible = "samsung,exynos4212-fimc-lite";
 			reg = <0x12390000 0x1000>;
-			interrupts = <0 105 0>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&pd_isp>;
 			clocks = <&clock CLK_FIMC_LITE0>;
 			clock-names = "flite";
@@ -138,7 +138,7 @@
 		fimc_lite_1: fimc-lite@123A0000 {
 			compatible = "samsung,exynos4212-fimc-lite";
 			reg = <0x123A0000 0x1000>;
-			interrupts = <0 106 0>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&pd_isp>;
 			clocks = <&clock CLK_FIMC_LITE1>;
 			clock-names = "flite";
@@ -147,9 +147,10 @@
 		};
 
 		fimc_is: fimc-is@12000000 {
-			compatible = "samsung,exynos4212-fimc-is", "simple-bus";
+			compatible = "samsung,exynos4212-fimc-is";
 			reg = <0x12000000 0x260000>;
-			interrupts = <0 90 0>, <0 95 0>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&pd_isp>;
 			clocks = <&clock CLK_FIMC_LITE0>,
 				 <&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>,
@@ -200,7 +201,7 @@
 	mshc_0: mmc@12550000 {
 		compatible = "samsung,exynos4412-dw-mshc";
 		reg = <0x12550000 0x1000>;
-		interrupts = <0 77 0>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		fifo-depth = <0x80>;
@@ -461,11 +462,26 @@
 };
 
 &combiner {
-	interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-		     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-		     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-		     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
-		     <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>;
+	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 &exynos_usbphy {
@@ -529,18 +545,18 @@
 &pinctrl_0 {
 	compatible = "samsung,exynos4x12-pinctrl";
 	reg = <0x11400000 0x1000>;
-	interrupts = <0 47 0>;
+	interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 &pinctrl_1 {
 	compatible = "samsung,exynos4x12-pinctrl";
 	reg = <0x11000000 0x1000>;
-	interrupts = <0 46 0>;
+	interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 
 	wakup_eint: wakeup-interrupt-controller {
 		compatible = "samsung,exynos4210-wakeup-eint";
 		interrupt-parent = <&gic>;
-		interrupts = <0 32 0>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 	};
 };
 
@@ -554,7 +570,7 @@
 &pinctrl_3 {
 	compatible = "samsung,exynos4x12-pinctrl";
 	reg = <0x106E0000 0x1000>;
-	interrupts = <0 72 0>;
+	interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 &pmu_system_controller {
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index 8f06609..7fd870e 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -13,6 +13,8 @@
  * published by the Free Software Foundation.
  */
 
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include "exynos-syscon-restart.dtsi"
 
 / {
@@ -53,14 +55,38 @@
 			interrupt-controller;
 			samsung,combiner-nr = <32>;
 			reg = <0x10440000 0x1000>;
-			interrupts =	<0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-					<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-					<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-					<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
-					<0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-					<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
-					<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-					<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+			interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 5 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 9 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 10 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 23 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 24 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 27 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 28 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 31 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		gic: interrupt-controller@10481000 {
@@ -71,7 +97,8 @@
 				<0x10482000 0x1000>,
 				<0x10484000 0x2000>,
 				<0x10486000 0x2000>;
-			interrupts = <1 9 0xf04>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
 		sysreg_system_controller: syscon@10050000 {
@@ -82,31 +109,31 @@
 		serial_0: serial@12C00000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x12C00000 0x100>;
-			interrupts = <0 51 0>;
+			interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		serial_1: serial@12C10000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x12C10000 0x100>;
-			interrupts = <0 52 0>;
+			interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		serial_2: serial@12C20000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x12C20000 0x100>;
-			interrupts = <0 53 0>;
+			interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		serial_3: serial@12C30000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x12C30000 0x100>;
-			interrupts = <0 54 0>;
+			interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		i2c_0: i2c@12C60000 {
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x12C60000 0x100>;
-			interrupts = <0 56 0>;
+			interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			samsung,sysreg-phandle = <&sysreg_system_controller>;
@@ -116,7 +143,7 @@
 		i2c_1: i2c@12C70000 {
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x12C70000 0x100>;
-			interrupts = <0 57 0>;
+			interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			samsung,sysreg-phandle = <&sysreg_system_controller>;
@@ -126,7 +153,7 @@
 		i2c_2: i2c@12C80000 {
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x12C80000 0x100>;
-			interrupts = <0 58 0>;
+			interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			samsung,sysreg-phandle = <&sysreg_system_controller>;
@@ -136,7 +163,7 @@
 		i2c_3: i2c@12C90000 {
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x12C90000 0x100>;
-			interrupts = <0 59 0>;
+			interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			samsung,sysreg-phandle = <&sysreg_system_controller>;
@@ -153,7 +180,8 @@
 		rtc: rtc@101E0000 {
 			compatible = "samsung,s3c6410-rtc";
 			reg = <0x101E0000 0x100>;
-			interrupts = <0 43 0>, <0 44 0>;
+			interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 44 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index d5d5191..8f3a804 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -523,6 +523,7 @@
 	status = "okay";
 };
 
+/* eMMC flash */
 &mmc_0 {
 	status = "okay";
 	num-slots = <1>;
@@ -536,6 +537,7 @@
 	cap-mmc-highspeed;
 };
 
+/* uSD card */
 &mmc_2 {
 	status = "okay";
 	num-slots = <1>;
@@ -553,6 +555,8 @@
 /*
  * On Snow we've got SIP WiFi and so can keep drive strengths low to
  * reduce EMI.
+ *
+ * WiFi SDIO module
  */
 &mmc_3 {
 	status = "okay";
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index f7357d9..b6d7444 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -181,8 +181,8 @@
 						<0x1 0 &combiner 23 4>,
 						<0x2 0 &combiner 25 2>,
 						<0x3 0 &combiner 25 3>,
-						<0x4 0 &gic 0 120 0>,
-						<0x5 0 &gic 0 121 0>;
+						<0x4 0 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>,
+						<0x5 0 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
@@ -195,31 +195,31 @@
 		pinctrl_0: pinctrl@11400000 {
 			compatible = "samsung,exynos5250-pinctrl";
 			reg = <0x11400000 0x1000>;
-			interrupts = <0 46 0>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 
 			wakup_eint: wakeup-interrupt-controller {
 				compatible = "samsung,exynos4210-wakeup-eint";
 				interrupt-parent = <&gic>;
-				interrupts = <0 32 0>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
 		pinctrl_1: pinctrl@13400000 {
 			compatible = "samsung,exynos5250-pinctrl";
 			reg = <0x13400000 0x1000>;
-			interrupts = <0 45 0>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_2: pinctrl@10d10000 {
 			compatible = "samsung,exynos5250-pinctrl";
 			reg = <0x10d10000 0x1000>;
-			interrupts = <0 50 0>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_3: pinctrl@03860000 {
 			compatible = "samsung,exynos5250-pinctrl";
 			reg = <0x03860000 0x1000>;
-			interrupts = <0 47 0>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pmu_system_controller: system-controller@10040000 {
@@ -236,7 +236,7 @@
 		watchdog@101D0000 {
 			compatible = "samsung,exynos5250-wdt";
 			reg = <0x101D0000 0x100>;
-			interrupts = <0 42 0>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_WDT>;
 			clock-names = "watchdog";
 			samsung,syscon-phandle = <&pmu_system_controller>;
@@ -245,7 +245,7 @@
 		g2d@10850000 {
 			compatible = "samsung,exynos5250-g2d";
 			reg = <0x10850000 0x1000>;
-			interrupts = <0 91 0>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_G2D>;
 			clock-names = "fimg2d";
 			iommus = <&sysmmu_g2d>;
@@ -254,7 +254,7 @@
 		mfc: codec@11000000 {
 			compatible = "samsung,mfc-v6";
 			reg = <0x11000000 0x10000>;
-			interrupts = <0 96 0>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&pd_mfc>;
 			clocks = <&clock CLK_MFC>;
 			clock-names = "mfc";
@@ -265,7 +265,7 @@
 		rotator: rotator@11C00000 {
 			compatible = "samsung,exynos5250-rotator";
 			reg = <0x11C00000 0x64>;
-			interrupts = <0 84 0>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_ROTATOR>;
 			clock-names = "rotator";
 			iommus = <&sysmmu_rotator>;
@@ -274,7 +274,7 @@
 		tmu: tmu@10060000 {
 			compatible = "samsung,exynos5250-tmu";
 			reg = <0x10060000 0x100>;
-			interrupts = <0 65 0>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TMU>;
 			clock-names = "tmu_apbif";
 			#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -284,7 +284,7 @@
 			compatible = "snps,dwc-ahci";
 			samsung,sata-freq = <66>;
 			reg = <0x122F0000 0x1ff>;
-			interrupts = <0 115 0>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
 			clock-names = "sata", "sclk_sata";
 			phys = <&sata_phy>;
@@ -306,7 +306,7 @@
 		i2c_4: i2c@12CA0000 {
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x12CA0000 0x100>;
-			interrupts = <0 60 0>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock CLK_I2C4>;
@@ -319,7 +319,7 @@
 		i2c_5: i2c@12CB0000 {
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x12CB0000 0x100>;
-			interrupts = <0 61 0>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock CLK_I2C5>;
@@ -332,7 +332,7 @@
 		i2c_6: i2c@12CC0000 {
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x12CC0000 0x100>;
-			interrupts = <0 62 0>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock CLK_I2C6>;
@@ -345,7 +345,7 @@
 		i2c_7: i2c@12CD0000 {
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x12CD0000 0x100>;
-			interrupts = <0 63 0>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock CLK_I2C7>;
@@ -358,7 +358,7 @@
 		i2c_8: i2c@12CE0000 {
 			compatible = "samsung,s3c2440-hdmiphy-i2c";
 			reg = <0x12CE0000 0x1000>;
-			interrupts = <0 64 0>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock CLK_I2C_HDMI>;
@@ -380,7 +380,7 @@
 			compatible = "samsung,exynos4210-spi";
 			status = "disabled";
 			reg = <0x12d20000 0x100>;
-			interrupts = <0 66 0>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&pdma0 5
 				&pdma0 4>;
 			dma-names = "tx", "rx";
@@ -396,7 +396,7 @@
 			compatible = "samsung,exynos4210-spi";
 			status = "disabled";
 			reg = <0x12d30000 0x100>;
-			interrupts = <0 67 0>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&pdma1 5
 				&pdma1 4>;
 			dma-names = "tx", "rx";
@@ -412,7 +412,7 @@
 			compatible = "samsung,exynos4210-spi";
 			status = "disabled";
 			reg = <0x12d40000 0x100>;
-			interrupts = <0 68 0>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&pdma0 7
 				&pdma0 6>;
 			dma-names = "tx", "rx";
@@ -426,7 +426,7 @@
 
 		mmc_0: mmc@12200000 {
 			compatible = "samsung,exynos5250-dw-mshc";
-			interrupts = <0 75 0>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x12200000 0x1000>;
@@ -438,7 +438,7 @@
 
 		mmc_1: mmc@12210000 {
 			compatible = "samsung,exynos5250-dw-mshc";
-			interrupts = <0 76 0>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x12210000 0x1000>;
@@ -450,7 +450,7 @@
 
 		mmc_2: mmc@12220000 {
 			compatible = "samsung,exynos5250-dw-mshc";
-			interrupts = <0 77 0>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x12220000 0x1000>;
@@ -463,7 +463,7 @@
 		mmc_3: mmc@12230000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12230000 0x1000>;
-			interrupts = <0 78 0>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
@@ -526,7 +526,7 @@
 			usbdrd_dwc3: dwc3@12000000 {
 				compatible = "synopsys,dwc3";
 				reg = <0x12000000 0x10000>;
-				interrupts = <0 72 0>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
@@ -544,7 +544,7 @@
 		ehci: usb@12110000 {
 			compatible = "samsung,exynos4210-ehci";
 			reg = <0x12110000 0x100>;
-			interrupts = <0 71 0>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&clock CLK_USB2>;
 			clock-names = "usbhost";
@@ -559,7 +559,7 @@
 		ohci: usb@12120000 {
 			compatible = "samsung,exynos4210-ohci";
 			reg = <0x12120000 0x100>;
-			interrupts = <0 71 0>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&clock CLK_USB2>;
 			clock-names = "usbhost";
@@ -591,7 +591,7 @@
 			pdma0: pdma@121A0000 {
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0x121A0000 0x1000>;
-				interrupts = <0 34 0>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_PDMA0>;
 				clock-names = "apb_pclk";
 				#dma-cells = <1>;
@@ -602,7 +602,7 @@
 			pdma1: pdma@121B0000 {
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0x121B0000 0x1000>;
-				interrupts = <0 35 0>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_PDMA1>;
 				clock-names = "apb_pclk";
 				#dma-cells = <1>;
@@ -613,7 +613,7 @@
 			mdma0: mdma@10800000 {
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0x10800000 0x1000>;
-				interrupts = <0 33 0>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_MDMA0>;
 				clock-names = "apb_pclk";
 				#dma-cells = <1>;
@@ -624,7 +624,7 @@
 			mdma1: mdma@11C10000 {
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0x11C10000 0x1000>;
-				interrupts = <0 124 0>;
+				interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_MDMA1>;
 				clock-names = "apb_pclk";
 				#dma-cells = <1>;
@@ -636,7 +636,7 @@
 		gsc_0:  gsc@13e00000 {
 			compatible = "samsung,exynos5-gsc";
 			reg = <0x13e00000 0x1000>;
-			interrupts = <0 85 0>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&pd_gsc>;
 			clocks = <&clock CLK_GSCL0>;
 			clock-names = "gscl";
@@ -646,7 +646,7 @@
 		gsc_1:  gsc@13e10000 {
 			compatible = "samsung,exynos5-gsc";
 			reg = <0x13e10000 0x1000>;
-			interrupts = <0 86 0>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&pd_gsc>;
 			clocks = <&clock CLK_GSCL1>;
 			clock-names = "gscl";
@@ -656,7 +656,7 @@
 		gsc_2:  gsc@13e20000 {
 			compatible = "samsung,exynos5-gsc";
 			reg = <0x13e20000 0x1000>;
-			interrupts = <0 87 0>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&pd_gsc>;
 			clocks = <&clock CLK_GSCL2>;
 			clock-names = "gscl";
@@ -666,7 +666,7 @@
 		gsc_3:  gsc@13e30000 {
 			compatible = "samsung,exynos5-gsc";
 			reg = <0x13e30000 0x1000>;
-			interrupts = <0 88 0>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&pd_gsc>;
 			clocks = <&clock CLK_GSCL3>;
 			clock-names = "gscl";
@@ -677,7 +677,7 @@
 			compatible = "samsung,exynos4212-hdmi";
 			reg = <0x14530000 0x70000>;
 			power-domains = <&pd_disp1>;
-			interrupts = <0 95 0>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
 				 <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
 				 <&clock CLK_MOUT_HDMI>;
@@ -690,7 +690,7 @@
 			compatible = "samsung,exynos5250-mixer";
 			reg = <0x14450000 0x10000>;
 			power-domains = <&pd_disp1>;
-			interrupts = <0 94 0>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
 				 <&clock CLK_SCLK_HDMI>;
 			clock-names = "mixer", "hdmi", "sclk_hdmi";
@@ -706,7 +706,7 @@
 		adc: adc@12D10000 {
 			compatible = "samsung,exynos-adc-v1";
 			reg = <0x12D10000 0x100>;
-			interrupts = <0 106 0>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_ADC>;
 			clock-names = "adc";
 			#io-channel-cells = <1>;
@@ -718,7 +718,7 @@
 		sss@10830000 {
 			compatible = "samsung,exynos4210-secss";
 			reg = <0x10830000 0x300>;
-			interrupts = <0 112 0>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_SSS>;
 			clock-names = "secss";
 		};
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
index a86a489..5818718 100644
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -10,6 +10,8 @@
 */
 
 #include <dt-bindings/clock/exynos5260-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	compatible = "samsung,exynos5260", "samsung,exynos5";
@@ -168,7 +170,8 @@
 				<0x10482000 0x1000>,
 				<0x10484000 0x2000>,
 				<0x10486000 0x2000>;
-			interrupts = <1 9 0xf04>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
 		chipid: chipid@10000000 {
@@ -181,10 +184,18 @@
 			reg = <0x100B0000 0x1000>;
 			clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
 			clock-names = "fin_pll", "mct";
-			interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
-					<0 107 0>, <0 122 0>, <0 123 0>,
-					<0 124 0>, <0 125 0>, <0 126 0>,
-					<0 127 0>, <0 128 0>, <0 129 0>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		cci: cci@10F00000 {
@@ -210,25 +221,25 @@
 		pinctrl_0: pinctrl@11600000 {
 			compatible = "samsung,exynos5260-pinctrl";
 			reg = <0x11600000 0x1000>;
-			interrupts = <0 79 0>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 
 			wakeup-interrupt-controller {
 				compatible = "samsung,exynos4210-wakeup-eint";
 				interrupt-parent = <&gic>;
-				interrupts = <0 32 0>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
 		pinctrl_1: pinctrl@12290000 {
 			compatible = "samsung,exynos5260-pinctrl";
 			reg = <0x12290000 0x1000>;
-			interrupts = <0 157 0>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_2: pinctrl@128B0000 {
 			compatible = "samsung,exynos5260-pinctrl";
 			reg = <0x128B0000 0x1000>;
-			interrupts = <0 243 0>;
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pmu_system_controller: system-controller@10D50000 {
@@ -239,7 +250,7 @@
 		uart0: serial@12C00000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x12C00000 0x100>;
-			interrupts = <0 146 0>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
 			clock-names = "uart", "clk_uart_baud0";
 			status = "disabled";
@@ -248,7 +259,7 @@
 		uart1: serial@12C10000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x12C10000 0x100>;
-			interrupts = <0 147 0>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>;
 			clock-names = "uart", "clk_uart_baud0";
 			status = "disabled";
@@ -257,7 +268,7 @@
 		uart2: serial@12C20000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x12C20000 0x100>;
-			interrupts = <0 148 0>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>;
 			clock-names = "uart", "clk_uart_baud0";
 			status = "disabled";
@@ -266,7 +277,7 @@
 		uart3: serial@12860000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x12860000 0x100>;
-			interrupts = <0 145 0>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>;
 			clock-names = "uart", "clk_uart_baud0";
 			status = "disabled";
@@ -275,7 +286,7 @@
 		mmc_0: mmc@12140000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12140000 0x2000>;
-			interrupts = <0 156 0>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>;
@@ -287,7 +298,7 @@
 		mmc_1: mmc@12150000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12150000 0x2000>;
-			interrupts = <0 158 0>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>;
@@ -299,7 +310,7 @@
 		mmc_2: mmc@12160000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12160000 0x2000>;
-			interrupts = <0 159 0>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>;
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index 3c271cb..c4de135 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -15,6 +15,7 @@
 #include <dt-bindings/clock/maxim,max77802.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/sound/samsung-i2s.h>
 #include "exynos54xx-odroidxu-leds.dtsi"
 
 / {
@@ -57,6 +58,61 @@
 		compatible = "samsung,secure-firmware";
 		reg = <0x02073000 0x1000>;
 	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,name = "Odroid-XU";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Speakers", "Speakers";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPL",
+			"Headphone Jack", "HPR",
+			"Headphone Jack", "MICBIAS",
+			"IN1", "Headphone Jack",
+			"Speakers", "SPKL",
+			"Speakers", "SPKR";
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&link0_codec>;
+		simple-audio-card,frame-master = <&link0_codec>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&audi2s0 0>;
+			system-clock-frequency = <19200000>;
+		};
+
+		link0_codec: simple-audio-card,codec {
+			sound-dai = <&max98090>;
+			clocks = <&audi2s0 CLK_I2S_CDCLK>;
+		};
+	};
+};
+
+&audi2s0 {
+	status = "okay";
+};
+
+&clock {
+	clocks = <&fin_pll>;
+	assigned-clocks = <&clock CLK_FOUT_EPLL>;
+	assigned-clock-rates = <192000000>;
+};
+
+&clock_audss {
+	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
+			<&clock_audss EXYNOS_MOUT_I2S>,
+			<&clock_audss EXYNOS_DOUT_SRP>,
+			<&clock_audss EXYNOS_DOUT_AUD_BUS>;
+
+	assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
+			<&clock_audss EXYNOS_MOUT_AUDSS>;
+
+	assigned-clock-rates =  <0>,
+				<0>,
+				<96000000>,
+				<19200000>;
 };
 
 &cpu0_thermal {
@@ -440,6 +496,19 @@
 	};
 };
 
+&i2c_1 {
+	status = "okay";
+	max98090: max98090@10 {
+		compatible = "maxim,max98090";
+		reg = <0x10>;
+		interrupt-parent = <&gpj3>;
+		interrupts = <0 IRQ_TYPE_NONE>;
+		clocks = <&audi2s0 CLK_I2S_CDCLK>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+	};
+};
+
 &mmc_0 {
 	status = "okay";
 	mmc-pwrseq = <&emmc_pwrseq>;
diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
index a083d23..ff46a1c 100644
--- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
@@ -615,4 +615,13 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
+
+	audi2s0_bus: audi2s0-bus {
+		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+				"gpz-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
 };
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 137f484..2b6adaf 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -16,6 +16,7 @@
 #include "exynos54xx.dtsi"
 #include "exynos-syscon-restart.dtsi"
 #include <dt-bindings/clock/exynos5410.h>
+#include <dt-bindings/clock/exynos-audss-clk.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
@@ -82,10 +83,18 @@
 			#clock-cells = <1>;
 		};
 
+		clock_audss: audss-clock-controller@3810000 {
+			compatible = "samsung,exynos5410-audss-clock";
+			reg = <0x03810000 0x0C>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock CLK_FOUT_EPLL>;
+			clock-names = "pll_ref", "pll_in";
+		};
+
 		tmu_cpu0: tmu@10060000 {
 			compatible = "samsung,exynos5420-tmu";
 			reg = <0x10060000 0x100>;
-			interrupts = <GIC_SPI 65 0>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TMU>;
 			clock-names = "tmu_apbif";
 			#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -94,7 +103,7 @@
 		tmu_cpu1: tmu@10064000 {
 			compatible = "samsung,exynos5420-tmu";
 			reg = <0x10064000 0x100>;
-			interrupts = <GIC_SPI 183 0>;
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TMU>;
 			clock-names = "tmu_apbif";
 			#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -103,7 +112,7 @@
 		tmu_cpu2: tmu@10068000 {
 			compatible = "samsung,exynos5420-tmu";
 			reg = <0x10068000 0x100>;
-			interrupts = <GIC_SPI 184 0>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TMU>;
 			clock-names = "tmu_apbif";
 			#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -112,7 +121,7 @@
 		tmu_cpu3: tmu@1006c000 {
 			compatible = "samsung,exynos5420-tmu";
 			reg = <0x1006c000 0x100>;
-			interrupts = <GIC_SPI 185 0>;
+			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TMU>;
 			clock-names = "tmu_apbif";
 			#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -121,7 +130,7 @@
 		mmc_0: mmc@12200000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12200000 0x1000>;
-			interrupts = <0 75 0>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
@@ -133,7 +142,7 @@
 		mmc_1: mmc@12210000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12210000 0x1000>;
-			interrupts = <0 76 0>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
@@ -145,7 +154,7 @@
 		mmc_2: mmc@12220000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12220000 0x1000>;
-			interrupts = <0 77 0>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
@@ -157,31 +166,81 @@
 		pinctrl_0: pinctrl@13400000 {
 			compatible = "samsung,exynos5410-pinctrl";
 			reg = <0x13400000 0x1000>;
-			interrupts = <0 45 0>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 
 			wakeup-interrupt-controller {
 				compatible = "samsung,exynos4210-wakeup-eint";
 				interrupt-parent = <&gic>;
-				interrupts = <0 32 0>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
 		pinctrl_1: pinctrl@14000000 {
 			compatible = "samsung,exynos5410-pinctrl";
 			reg = <0x14000000 0x1000>;
-			interrupts = <0 46 0>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_2: pinctrl@10d10000 {
 			compatible = "samsung,exynos5410-pinctrl";
 			reg = <0x10d10000 0x1000>;
-			interrupts = <0 50 0>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_3: pinctrl@03860000 {
 			compatible = "samsung,exynos5410-pinctrl";
 			reg = <0x03860000 0x1000>;
-			interrupts = <0 47 0>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		amba {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			interrupt-parent = <&gic>;
+			ranges;
+
+			pdma0: pdma@12680000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x121A0000 0x1000>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clock CLK_PDMA0>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+
+			pdma1: pdma@12690000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x121B0000 0x1000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clock CLK_PDMA1>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+		};
+
+		audi2s0: i2s@03830000 {
+			compatible = "samsung,exynos5420-i2s";
+			reg = <0x03830000 0x100>;
+			dmas = <&pdma0 10
+				&pdma0 9
+				&pdma0 8>;
+			dma-names = "tx", "rx", "tx-sec";
+			clocks = <&clock_audss EXYNOS_I2S_BUS>,
+				<&clock_audss EXYNOS_I2S_BUS>,
+				<&clock_audss EXYNOS_SCLK_I2S>;
+			clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+			#clock-cells = <1>;
+			clock-output-names = "i2s_cdclk0";
+			#sound-dai-cells = <1>;
+			samsung,idma-addr = <0x03000000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&audi2s0_bus>;
+			status = "disabled";
 		};
 	};
 
@@ -329,7 +388,7 @@
 };
 
 &usbdrd_dwc3_1 {
-	interrupts = <GIC_SPI 200 0>;
+	interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 &usbdrd_phy1 {
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index ec4a00f..1f964ec 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -697,6 +697,7 @@
 	status = "okay";
 };
 
+/* eMMC flash */
 &mmc_0 {
 	status = "okay";
 	num-slots = <1>;
@@ -714,6 +715,7 @@
 	bus-width = <8>;
 };
 
+/* WiFi SDIO module */
 &mmc_1 {
 	status = "okay";
 	num-slots = <1>;
@@ -733,6 +735,7 @@
 	vqmmc-supply = <&buck10_reg>;
 };
 
+/* uSD card */
 &mmc_2 {
 	status = "okay";
 	num-slots = <1>;
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 00c4cfa..906a1a4 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -193,7 +193,7 @@
 		mfc: codec@11000000 {
 			compatible = "samsung,mfc-v7";
 			reg = <0x11000000 0x10000>;
-			interrupts = <0 96 0>;
+			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_MFC>;
 			clock-names = "mfc";
 			power-domains = <&mfc_pd>;
@@ -203,7 +203,7 @@
 
 		mmc_0: mmc@12200000 {
 			compatible = "samsung,exynos5420-dw-mshc-smu";
-			interrupts = <0 75 0>;
+			interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x12200000 0x2000>;
@@ -215,7 +215,7 @@
 
 		mmc_1: mmc@12210000 {
 			compatible = "samsung,exynos5420-dw-mshc-smu";
-			interrupts = <0 76 0>;
+			interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x12210000 0x2000>;
@@ -227,7 +227,7 @@
 
 		mmc_2: mmc@12220000 {
 			compatible = "samsung,exynos5420-dw-mshc";
-			interrupts = <0 77 0>;
+			interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x12220000 0x1000>;
@@ -320,37 +320,37 @@
 		pinctrl_0: pinctrl@13400000 {
 			compatible = "samsung,exynos5420-pinctrl";
 			reg = <0x13400000 0x1000>;
-			interrupts = <0 45 0>;
+			interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
 
 			wakeup-interrupt-controller {
 				compatible = "samsung,exynos4210-wakeup-eint";
 				interrupt-parent = <&gic>;
-				interrupts = <0 32 0>;
+				interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
 		pinctrl_1: pinctrl@13410000 {
 			compatible = "samsung,exynos5420-pinctrl";
 			reg = <0x13410000 0x1000>;
-			interrupts = <0 78 0>;
+			interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_2: pinctrl@14000000 {
 			compatible = "samsung,exynos5420-pinctrl";
 			reg = <0x14000000 0x1000>;
-			interrupts = <0 46 0>;
+			interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_3: pinctrl@14010000 {
 			compatible = "samsung,exynos5420-pinctrl";
 			reg = <0x14010000 0x1000>;
-			interrupts = <0 50 0>;
+			interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_4: pinctrl@03860000 {
 			compatible = "samsung,exynos5420-pinctrl";
 			reg = <0x03860000 0x1000>;
-			interrupts = <0 47 0>;
+			interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		amba {
@@ -363,7 +363,7 @@
 			adma: adma@03880000 {
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0x03880000 0x1000>;
-				interrupts = <0 110 0>;
+				interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock_audss EXYNOS_ADMA>;
 				clock-names = "apb_pclk";
 				#dma-cells = <1>;
@@ -374,7 +374,7 @@
 			pdma0: pdma@121A0000 {
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0x121A0000 0x1000>;
-				interrupts = <0 34 0>;
+				interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_PDMA0>;
 				clock-names = "apb_pclk";
 				#dma-cells = <1>;
@@ -385,7 +385,7 @@
 			pdma1: pdma@121B0000 {
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0x121B0000 0x1000>;
-				interrupts = <0 35 0>;
+				interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_PDMA1>;
 				clock-names = "apb_pclk";
 				#dma-cells = <1>;
@@ -396,7 +396,7 @@
 			mdma0: mdma@10800000 {
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0x10800000 0x1000>;
-				interrupts = <0 33 0>;
+				interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_MDMA0>;
 				clock-names = "apb_pclk";
 				#dma-cells = <1>;
@@ -407,7 +407,7 @@
 			mdma1: mdma@11C10000 {
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0x11C10000 0x1000>;
-				interrupts = <0 124 0>;
+				interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_MDMA1>;
 				clock-names = "apb_pclk";
 				#dma-cells = <1>;
@@ -479,7 +479,7 @@
 		spi_0: spi@12d20000 {
 			compatible = "samsung,exynos4210-spi";
 			reg = <0x12d20000 0x100>;
-			interrupts = <0 68 0>;
+			interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&pdma0 5
 				&pdma0 4>;
 			dma-names = "tx", "rx";
@@ -495,7 +495,7 @@
 		spi_1: spi@12d30000 {
 			compatible = "samsung,exynos4210-spi";
 			reg = <0x12d30000 0x100>;
-			interrupts = <0 69 0>;
+			interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&pdma1 5
 				&pdma1 4>;
 			dma-names = "tx", "rx";
@@ -511,7 +511,7 @@
 		spi_2: spi@12d40000 {
 			compatible = "samsung,exynos4210-spi";
 			reg = <0x12d40000 0x100>;
-			interrupts = <0 70 0>;
+			interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&pdma0 7
 				&pdma0 6>;
 			dma-names = "tx", "rx";
@@ -539,7 +539,7 @@
 		dsi@14500000 {
 			compatible = "samsung,exynos5410-mipi-dsi";
 			reg = <0x14500000 0x10000>;
-			interrupts = <0 82 0>;
+			interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&mipi_phy 1>;
 			phy-names = "dsim";
 			clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>;
@@ -552,7 +552,7 @@
 		adc: adc@12D10000 {
 			compatible = "samsung,exynos-adc-v2";
 			reg = <0x12D10000 0x100>;
-			interrupts = <0 106 0>;
+			interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TSADC>;
 			clock-names = "adc";
 			#io-channel-cells = <1>;
@@ -564,7 +564,7 @@
 		hsi2c_8: i2c@12E00000 {
 			compatible = "samsung,exynos5250-hsi2c";
 			reg = <0x12E00000 0x1000>;
-			interrupts = <0 87 0>;
+			interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-names = "default";
@@ -577,7 +577,7 @@
 		hsi2c_9: i2c@12E10000 {
 			compatible = "samsung,exynos5250-hsi2c";
 			reg = <0x12E10000 0x1000>;
-			interrupts = <0 88 0>;
+			interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-names = "default";
@@ -590,7 +590,7 @@
 		hsi2c_10: i2c@12E20000 {
 			compatible = "samsung,exynos5250-hsi2c";
 			reg = <0x12E20000 0x1000>;
-			interrupts = <0 203 0>;
+			interrupts = <0 203 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-names = "default";
@@ -603,7 +603,7 @@
 		hdmi: hdmi@14530000 {
 			compatible = "samsung,exynos5420-hdmi";
 			reg = <0x14530000 0x70000>;
-			interrupts = <0 95 0>;
+			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
 				 <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
 				 <&clock CLK_MOUT_HDMI>;
@@ -622,7 +622,7 @@
 		mixer: mixer@14450000 {
 			compatible = "samsung,exynos5420-mixer";
 			reg = <0x14450000 0x10000>;
-			interrupts = <0 94 0>;
+			interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
 				 <&clock CLK_SCLK_HDMI>;
 			clock-names = "mixer", "hdmi", "sclk_hdmi";
@@ -633,7 +633,7 @@
 		rotator: rotator@11C00000 {
 			compatible = "samsung,exynos5250-rotator";
 			reg = <0x11C00000 0x64>;
-			interrupts = <0 84 0>;
+			interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_ROTATOR>;
 			clock-names = "rotator";
 			iommus = <&sysmmu_rotator>;
@@ -642,7 +642,7 @@
 		gsc_0: video-scaler@13e00000 {
 			compatible = "samsung,exynos5-gsc";
 			reg = <0x13e00000 0x1000>;
-			interrupts = <0 85 0>;
+			interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_GSCL0>;
 			clock-names = "gscl";
 			power-domains = <&gsc_pd>;
@@ -652,7 +652,7 @@
 		gsc_1: video-scaler@13e10000 {
 			compatible = "samsung,exynos5-gsc";
 			reg = <0x13e10000 0x1000>;
-			interrupts = <0 86 0>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_GSCL1>;
 			clock-names = "gscl";
 			power-domains = <&gsc_pd>;
@@ -662,7 +662,7 @@
 		jpeg_0: jpeg@11F50000 {
 			compatible = "samsung,exynos5420-jpeg";
 			reg = <0x11F50000 0x1000>;
-			interrupts = <0 89 0>;
+			interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "jpeg";
 			clocks = <&clock CLK_JPEG>;
 			iommus = <&sysmmu_jpeg0>;
@@ -671,7 +671,7 @@
 		jpeg_1: jpeg@11F60000 {
 			compatible = "samsung,exynos5420-jpeg";
 			reg = <0x11F60000 0x1000>;
-			interrupts = <0 168 0>;
+			interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "jpeg";
 			clocks = <&clock CLK_JPEG2>;
 			iommus = <&sysmmu_jpeg1>;
@@ -691,7 +691,7 @@
 		tmu_cpu0: tmu@10060000 {
 			compatible = "samsung,exynos5420-tmu";
 			reg = <0x10060000 0x100>;
-			interrupts = <0 65 0>;
+			interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TMU>;
 			clock-names = "tmu_apbif";
 			#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -700,7 +700,7 @@
 		tmu_cpu1: tmu@10064000 {
 			compatible = "samsung,exynos5420-tmu";
 			reg = <0x10064000 0x100>;
-			interrupts = <0 183 0>;
+			interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TMU>;
 			clock-names = "tmu_apbif";
 			#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -709,7 +709,7 @@
 		tmu_cpu2: tmu@10068000 {
 			compatible = "samsung,exynos5420-tmu-ext-triminfo";
 			reg = <0x10068000 0x100>, <0x1006c000 0x4>;
-			interrupts = <0 184 0>;
+			interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
 			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
 			#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -718,7 +718,7 @@
 		tmu_cpu3: tmu@1006c000 {
 			compatible = "samsung,exynos5420-tmu-ext-triminfo";
 			reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
-			interrupts = <0 185 0>;
+			interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
 			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
 			#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -727,7 +727,7 @@
 		tmu_gpu: tmu@100a0000 {
 			compatible = "samsung,exynos5420-tmu-ext-triminfo";
 			reg = <0x100a0000 0x100>, <0x10068000 0x4>;
-			interrupts = <0 215 0>;
+			interrupts = <0 215 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
 			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
 			#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -799,7 +799,7 @@
 		sysmmu_scaler1r: sysmmu@0x12890000 {
 			compatible = "samsung,exynos-sysmmu";
 			reg = <0x12890000 0x1000>;
-			interrupts = <0 186 0>;
+			interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "sysmmu", "master";
 			clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
 			#iommu-cells = <0>;
@@ -808,7 +808,7 @@
 		sysmmu_scaler2r: sysmmu@0x128A0000 {
 			compatible = "samsung,exynos-sysmmu";
 			reg = <0x128A0000 0x1000>;
-			interrupts = <0 188 0>;
+			interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "sysmmu", "master";
 			clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
 			#iommu-cells = <0>;
@@ -867,7 +867,7 @@
 		sysmmu_jpeg1: sysmmu@0x11F20000 {
 			compatible = "samsung,exynos-sysmmu";
 			reg = <0x11F20000 0x1000>;
-			interrupts = <0 169 0>;
+			interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "sysmmu", "master";
 			clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>;
 			#iommu-cells = <0>;
@@ -1445,7 +1445,7 @@
 };
 
 &usbdrd_dwc3_1 {
-	interrupts = <GIC_SPI 73 0>;
+	interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 &usbdrd_phy1 {
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 246d298..05b9afdd 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -147,6 +147,11 @@
 	};
 };
 
+&adc {
+	vdd-supply = <&ldo4_reg>;
+	status = "okay";
+};
+
 &bus_wcore {
 	devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>,
 			<&nocp_mem1_0>, <&nocp_mem1_1>;
@@ -293,6 +298,12 @@
 				regulator-max-microvolt = <1800000>;
 			};
 
+			ldo4_reg: LDO4 {
+				regulator-name = "vdd_adc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
 			ldo5_reg: LDO5 {
 				regulator-name = "vdd_ldo5";
 				regulator-min-microvolt = <1800000>;
@@ -499,7 +510,6 @@
 &mmc_0 {
 	status = "okay";
 	mmc-pwrseq = <&emmc_pwrseq>;
-	cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>;
 	card-detect-delay = <200>;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index e6bffd1..2a2e570 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -10,6 +10,8 @@
 */
 
 #include <dt-bindings/clock/exynos5440.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	compatible = "samsung,exynos5440", "samsung,exynos5";
@@ -41,7 +43,8 @@
 			<0x2E2000 0x1000>,
 			<0x2E4000 0x2000>,
 			<0x2E6000 0x2000>;
-		interrupts = <1 9 0xf04>;
+		interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
 	cpus {
@@ -72,26 +75,26 @@
 
 	arm-pmu {
 		compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu";
-		interrupts = <0 52 4>,
-			     <0 53 4>,
-			     <0 54 4>,
-			     <0 55 4>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	timer {
 		compatible = "arm,cortex-a15-timer",
 			     "arm,armv7-timer";
-		interrupts = <1 13 0xf08>,
-			     <1 14 0xf08>,
-			     <1 11 0xf08>,
-			     <1 10 0xf08>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 		clock-frequency = <50000000>;
 	};
 
 	cpufreq@160000 {
 		compatible = "samsung,exynos5440-cpufreq";
 		reg = <0x160000 0x1000>;
-		interrupts = <0 57 0>;
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 		operating-points = <
 				/* KHz	  uV */
 				1500000 1100000
@@ -108,7 +111,7 @@
 	serial_0: serial@B0000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0xB0000 0x1000>;
-		interrupts = <0 2 0>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
@@ -116,7 +119,7 @@
 	serial_1: serial@C0000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0xC0000 0x1000>;
-		interrupts = <0 3 0>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
@@ -124,7 +127,7 @@
 	spi_0: spi@D0000 {
 		compatible = "samsung,exynos5440-spi";
 		reg = <0xD0000 0x100>;
-		interrupts = <0 4 0>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		samsung,spi-src-clk = <0>;
@@ -136,8 +139,14 @@
 	pin_ctrl: pinctrl@E0000 {
 		compatible = "samsung,exynos5440-pinctrl";
 		reg = <0xE0000 0x1000>;
-		interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>,
-			     <0 41 0>, <0 42 0>, <0 43 0>, <0 44 0>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		#gpio-cells = <2>;
@@ -162,7 +171,7 @@
 	i2c@F0000 {
 		compatible = "samsung,exynos5440-i2c";
 		reg = <0xF0000 0x1000>;
-		interrupts = <0 5 0>;
+		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&clock CLK_B_125>;
@@ -172,7 +181,7 @@
 	i2c@100000 {
 		compatible = "samsung,exynos5440-i2c";
 		reg = <0x100000 0x1000>;
-		interrupts = <0 6 0>;
+		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&clock CLK_B_125>;
@@ -182,16 +191,16 @@
 	watchdog@110000 {
 		compatible = "samsung,s3c2410-wdt";
 		reg = <0x110000 0x1000>;
-		interrupts = <0 1 0>;
+		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_B_125>;
 		clock-names = "watchdog";
 	};
 
 	gmac: ethernet@00230000 {
-		compatible = "snps,dwmac-3.70a";
+		compatible = "snps,dwmac-3.70a", "snps,dwmac";
 		reg = <0x00230000 0x8000>;
 		interrupt-parent = <&gic>;
-		interrupts = <0 31 4>;
+		interrupts = <GIC_SPI 31 4>;
 		interrupt-names = "macirq";
 		phy-mode = "sgmii";
 		clocks = <&clock CLK_GMAC0>;
@@ -209,7 +218,8 @@
 	rtc@130000 {
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x130000 0x1000>;
-		interrupts = <0 17 0>, <0 16 0>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_B_125>;
 		clock-names = "rtc";
 	};
@@ -217,7 +227,7 @@
 	tmuctrl_0: tmuctrl@160118 {
 		compatible = "samsung,exynos5440-tmu";
 		reg = <0x160118 0x230>, <0x160368 0x10>;
-		interrupts = <0 58 0>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_B_125>;
 		clock-names = "tmu_apbif";
 		#include "exynos5440-tmu-sensor-conf.dtsi"
@@ -226,7 +236,7 @@
 	tmuctrl_1: tmuctrl@16011C {
 		compatible = "samsung,exynos5440-tmu";
 		reg = <0x16011C 0x230>, <0x160368 0x10>;
-		interrupts = <0 58 0>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_B_125>;
 		clock-names = "tmu_apbif";
 		#include "exynos5440-tmu-sensor-conf.dtsi"
@@ -235,7 +245,7 @@
 	tmuctrl_2: tmuctrl@160120 {
 		compatible = "samsung,exynos5440-tmu";
 		reg = <0x160120 0x230>, <0x160368 0x10>;
-		interrupts = <0 58 0>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_B_125>;
 		clock-names = "tmu_apbif";
 		#include "exynos5440-tmu-sensor-conf.dtsi"
@@ -259,7 +269,7 @@
 	sata@210000 {
 		compatible = "snps,exynos5440-ahci";
 		reg = <0x210000 0x10000>;
-		interrupts = <0 30 0>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_SATA>;
 		clock-names = "sata";
 	};
@@ -267,7 +277,7 @@
 	ohci@220000 {
 		compatible = "samsung,exynos5440-ohci";
 		reg = <0x220000 0x1000>;
-		interrupts = <0 29 0>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_USB>;
 		clock-names = "usbhost";
 	};
@@ -275,7 +285,7 @@
 	ehci@221000 {
 		compatible = "samsung,exynos5440-ehci";
 		reg = <0x221000 0x1000>;
-		interrupts = <0 29 0>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_USB>;
 		clock-names = "usbhost";
 	};
@@ -285,7 +295,9 @@
 		reg = <0x290000 0x1000
 			0x270000 0x1000
 			0x271000 0x40>;
-		interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>;
 		clock-names = "pcie", "pcie_bus";
 		#address-cells = <3>;
@@ -306,7 +318,9 @@
 		reg = <0x2a0000 0x1000
 			0x272000 0x1000
 			0x271040 0x40>;
-		interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>;
 		clock-names = "pcie", "pcie_bus";
 		#address-cells = <3>;
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index 9d31cdc..0389e8a 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -62,34 +62,34 @@
 						<1 &combiner 23 4>,
 						<2 &combiner 25 2>,
 						<3 &combiner 25 3>,
-						<4 &gic 0 120 0>,
-						<5 &gic 0 121 0>,
-						<6 &gic 0 122 0>,
-						<7 &gic 0 123 0>,
-						<8 &gic 0 128 0>,
-						<9 &gic 0 129 0>,
-						<10 &gic 0 130 0>,
-						<11 &gic 0 131 0>;
+						<4 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>,
+						<5 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>,
+						<6 &gic 0 122 IRQ_TYPE_LEVEL_HIGH>,
+						<7 &gic 0 123 IRQ_TYPE_LEVEL_HIGH>,
+						<8 &gic 0 128 IRQ_TYPE_LEVEL_HIGH>,
+						<9 &gic 0 129 IRQ_TYPE_LEVEL_HIGH>,
+						<10 &gic 0 130 IRQ_TYPE_LEVEL_HIGH>,
+						<11 &gic 0 131 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
 		watchdog: watchdog@101d0000 {
 			compatible = "samsung,exynos5420-wdt";
 			reg = <0x101d0000 0x100>;
-			interrupts = <0 42 0>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		sss: sss@10830000 {
 			compatible = "samsung,exynos4210-secss";
 			reg = <0x10830000 0x300>;
-			interrupts = <0 112 0>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		/* i2c_0-3 are defined in exynos5.dtsi */
 		hsi2c_4: i2c@12ca0000 {
 			compatible = "samsung,exynos5250-hsi2c";
 			reg = <0x12ca0000 0x1000>;
-			interrupts = <0 60 0>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -98,7 +98,7 @@
 		hsi2c_5: i2c@12cb0000 {
 			compatible = "samsung,exynos5250-hsi2c";
 			reg = <0x12cb0000 0x1000>;
-			interrupts = <0 61 0>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -107,7 +107,7 @@
 		hsi2c_6: i2c@12cc0000 {
 			compatible = "samsung,exynos5250-hsi2c";
 			reg = <0x12cc0000 0x1000>;
-			interrupts = <0 62 0>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -116,7 +116,7 @@
 		hsi2c_7: i2c@12cd0000 {
 			compatible = "samsung,exynos5250-hsi2c";
 			reg = <0x12cd0000 0x1000>;
-			interrupts = <0 63 0>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -131,7 +131,7 @@
 			usbdrd_dwc3_0: dwc3@12000000 {
 				compatible = "snps,dwc3";
 				reg = <0x12000000 0x10000>;
-				interrupts = <0 72 0>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
@@ -166,7 +166,7 @@
 		usbhost2: usb@12110000 {
 			compatible = "samsung,exynos4210-ehci";
 			reg = <0x12110000 0x100>;
-			interrupts = <0 71 0>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -179,7 +179,7 @@
 		usbhost1: usb@12120000 {
 			compatible = "samsung,exynos4210-ohci";
 			reg = <0x12120000 0x100>;
-			interrupts = <0 71 0>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 01f4668..f9ff7f0 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -665,6 +665,7 @@
 	status = "okay";
 };
 
+/* eMMC flash */
 &mmc_0 {
 	status = "okay";
 	num-slots = <1>;
@@ -683,6 +684,7 @@
 	bus-width = <8>;
 };
 
+/* WiFi SDIO module */
 &mmc_1 {
 	status = "okay";
 	num-slots = <1>;
@@ -702,6 +704,7 @@
 	vqmmc-supply = <&buck10_reg>;
 };
 
+/* uSD card */
 &mmc_2 {
 	status = "okay";
 	num-slots = <1>;
diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi
index c85d07e..541d700 100644
--- a/arch/arm/boot/dts/hi3620.dtsi
+++ b/arch/arm/boot/dts/hi3620.dtsi
@@ -11,10 +11,12 @@
  * publishhed by the Free Software Foundation.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/clock/hi3620-clock.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	aliases {
 		serial0 = &uart0;
 		serial1 = &uart1;
@@ -537,6 +539,7 @@
 			reg = <0x803000 0x188>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+			#pinctrl-cells = <1>;
 			#gpio-range-cells = <3>;
 			ranges;
 
@@ -558,6 +561,7 @@
 			reg = <0x803800 0x2dc>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+			#pinctrl-cells = <1>;
 			ranges;
 
 			pinctrl-single,register-width = <32>;
diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hip01.dtsi
index 4e9562f..9d5fd5c 100644
--- a/arch/arm/boot/dts/hip01.dtsi
+++ b/arch/arm/boot/dts/hip01.dtsi
@@ -11,8 +11,6 @@
  * published by the Free Software Foundation.
  */
 
-#include "skeleton.dtsi"
-
 / {
 	interrupt-parent = <&gic>;
 	#address-cells = <1>;
diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi
index 0da76c5..c02e092 100644
--- a/arch/arm/boot/dts/hisi-x5hd2.dtsi
+++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi
@@ -7,10 +7,12 @@
  * publishhed by the Free Software Foundation.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/clock/hix5hd2-clock.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	aliases {
 		serial0 = &uart0;
 	};
diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi
index 22f5d1d..b792eee 100644
--- a/arch/arm/boot/dts/imx1.dtsi
+++ b/arch/arm/boot/dts/imx1.dtsi
@@ -9,7 +9,6 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-#include "skeleton.dtsi"
 #include "imx1-pinfunc.h"
 
 #include <dt-bindings/clock/imx1-clock.h>
@@ -17,6 +16,9 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	aliases {
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index 440ee9a..ac2a9da 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -9,10 +9,12 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-#include "skeleton.dtsi"
 #include "imx23-pinfunc.h"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	interrupt-parent = <&icoll>;
 
 	aliases {
@@ -464,7 +466,7 @@
 				reg = <0x80038000 0x2000>;
 				status = "disabled";
 			};
-                };
+		};
 
 		apbx@80040000 {
 			compatible = "simple-bus";
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index af6af87..831d09a 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -9,10 +9,12 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-#include "skeleton.dtsi"
 #include "imx25-pinfunc.h"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	aliases {
 		ethernet0 = &fec;
 		gpio0 = &gpio1;
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index f818ea4..9d8b596 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -9,7 +9,6 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-#include "skeleton.dtsi"
 #include "imx27-pinfunc.h"
 
 #include <dt-bindings/clock/imx27-clock.h>
@@ -18,6 +17,9 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	aliases {
 		ethernet0 = &fec;
 		gpio0 = &gpio1;
diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi
index 214bb15..a69856e 100644
--- a/arch/arm/boot/dts/imx28-m28.dtsi
+++ b/arch/arm/boot/dts/imx28-m28.dtsi
@@ -12,8 +12,8 @@
 #include "imx28.dtsi"
 
 / {
-	model = "DENX M28";
-	compatible = "denx,m28", "fsl,imx28";
+	model = "Aries/DENX M28";
+	compatible = "aries,m28", "denx,m28", "fsl,imx28";
 
 	memory {
 		reg = <0x40000000 0x08000000>;
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index 8d04e57..dbfb8aa 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -13,8 +13,8 @@
 #include "imx28-m28.dtsi"
 
 / {
-	model = "DENX M28EVK";
-	compatible = "denx,m28evk", "fsl,imx28";
+	model = "Aries/DENX M28EVK";
+	compatible = "aries,m28evk", "denx,m28evk", "fsl,imx28";
 
 	apb@80000000 {
 		apbh@80000000 {
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 0ad893b..3aabf65 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -10,10 +10,12 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
 #include "imx28-pinfunc.h"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	interrupt-parent = <&icoll>;
 
 	aliases {
diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi
index 8d4c0e3..685916e 100644
--- a/arch/arm/boot/dts/imx31.dtsi
+++ b/arch/arm/boot/dts/imx31.dtsi
@@ -9,9 +9,10 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-#include "skeleton.dtsi"
-
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	aliases {
 		serial0 = &uart1;
 		serial1 = &uart2;
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
index f812d58..9f40e62 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -8,10 +8,12 @@
  * Free Software Foundation.
  */
 
-#include "skeleton.dtsi"
 #include "imx35-pinfunc.h"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	aliases {
 		ethernet0 = &fec;
 		gpio0 = &gpio1;
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
index 8fe8bee..fe0221e 100644
--- a/arch/arm/boot/dts/imx50.dtsi
+++ b/arch/arm/boot/dts/imx50.dtsi
@@ -11,11 +11,13 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-#include "skeleton.dtsi"
 #include "imx50-pinfunc.h"
 #include <dt-bindings/clock/imx5-clock.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	aliases {
 		ethernet0 = &fec;
 		gpio0 = &gpio1;
@@ -103,8 +105,8 @@
 					reg = <0x50004000 0x4000>;
 					interrupts = <1>;
 					clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC1_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC1_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -115,8 +117,8 @@
 					reg = <0x50008000 0x4000>;
 					interrupts = <2>;
 					clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC2_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC2_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -127,7 +129,7 @@
 					reg = <0x5000c000 0x4000>;
 					interrupts = <33>;
 					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
-					         <&clks IMX5_CLK_UART3_PER_GATE>;
+						 <&clks IMX5_CLK_UART3_PER_GATE>;
 					clock-names = "ipg", "per";
 					status = "disabled";
 				};
@@ -139,7 +141,7 @@
 					reg = <0x50010000 0x4000>;
 					interrupts = <36>;
 					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
-					         <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+						 <&clks IMX5_CLK_ECSPI1_PER_GATE>;
 					clock-names = "ipg", "per";
 					status = "disabled";
 				};
@@ -164,8 +166,8 @@
 					reg = <0x50020000 0x4000>;
 					interrupts = <3>;
 					clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC3_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC3_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -176,8 +178,8 @@
 					reg = <0x50024000 0x4000>;
 					interrupts = <4>;
 					clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC4_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC4_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -279,7 +281,7 @@
 				reg = <0x53fa0000 0x4000>;
 				interrupts = <39>;
 				clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
-				         <&clks IMX5_CLK_GPT_HF_GATE>;
+					 <&clks IMX5_CLK_GPT_HF_GATE>;
 				clock-names = "ipg", "per";
 			};
 
@@ -298,7 +300,7 @@
 				compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
 				reg = <0x53fb4000 0x4000>;
 				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
-				         <&clks IMX5_CLK_PWM1_HF_GATE>;
+					 <&clks IMX5_CLK_PWM1_HF_GATE>;
 				clock-names = "ipg", "per";
 				interrupts = <61>;
 			};
@@ -308,7 +310,7 @@
 				compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
 				reg = <0x53fb8000 0x4000>;
 				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
-				         <&clks IMX5_CLK_PWM2_HF_GATE>;
+					 <&clks IMX5_CLK_PWM2_HF_GATE>;
 				clock-names = "ipg", "per";
 				interrupts = <94>;
 			};
@@ -318,7 +320,7 @@
 				reg = <0x53fbc000 0x4000>;
 				interrupts = <31>;
 				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
-				         <&clks IMX5_CLK_UART1_PER_GATE>;
+					 <&clks IMX5_CLK_UART1_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -328,7 +330,7 @@
 				reg = <0x53fc0000 0x4000>;
 				interrupts = <32>;
 				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
-				         <&clks IMX5_CLK_UART2_PER_GATE>;
+					 <&clks IMX5_CLK_UART2_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -383,7 +385,7 @@
 				reg = <0x53ff0000 0x4000>;
 				interrupts = <13>;
 				clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
-				         <&clks IMX5_CLK_UART4_PER_GATE>;
+					 <&clks IMX5_CLK_UART4_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -401,7 +403,7 @@
 				reg = <0x63f90000 0x4000>;
 				interrupts = <86>;
 				clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
-				         <&clks IMX5_CLK_UART5_PER_GATE>;
+					 <&clks IMX5_CLK_UART5_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -420,7 +422,7 @@
 				reg = <0x63fac000 0x4000>;
 				interrupts = <37>;
 				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
-				         <&clks IMX5_CLK_ECSPI2_PER_GATE>;
+					 <&clks IMX5_CLK_ECSPI2_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -430,7 +432,7 @@
 				reg = <0x63fb0000 0x4000>;
 				interrupts = <6>;
 				clocks = <&clks IMX5_CLK_SDMA_GATE>,
-				         <&clks IMX5_CLK_SDMA_GATE>;
+					 <&clks IMX5_CLK_SDMA_GATE>;
 				clock-names = "ipg", "ahb";
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin";
 			};
@@ -442,7 +444,7 @@
 				reg = <0x63fc0000 0x4000>;
 				interrupts = <38>;
 				clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
-				         <&clks IMX5_CLK_CSPI_IPG_GATE>;
+					 <&clks IMX5_CLK_CSPI_IPG_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -492,8 +494,8 @@
 				reg = <0x63fec000 0x4000>;
 				interrupts = <87>;
 				clocks = <&clks IMX5_CLK_FEC_GATE>,
-				         <&clks IMX5_CLK_FEC_GATE>,
-				         <&clks IMX5_CLK_FEC_GATE>;
+					 <&clks IMX5_CLK_FEC_GATE>,
+					 <&clks IMX5_CLK_FEC_GATE>;
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index f46fe9b..33526ca 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -10,7 +10,6 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-#include "skeleton.dtsi"
 #include "imx51-pinfunc.h"
 #include <dt-bindings/clock/imx5-clock.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -18,6 +17,9 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	aliases {
 		ethernet0 = &fec;
 		gpio0 = &gpio1;
@@ -130,8 +132,8 @@
 			reg = <0x40000000 0x20000000>;
 			interrupts = <11 10>;
 			clocks = <&clks IMX5_CLK_IPU_GATE>,
-			         <&clks IMX5_CLK_IPU_DI0_GATE>,
-			         <&clks IMX5_CLK_IPU_DI1_GATE>;
+				 <&clks IMX5_CLK_IPU_DI0_GATE>,
+				 <&clks IMX5_CLK_IPU_DI1_GATE>;
 			clock-names = "bus", "di0", "di1";
 			resets = <&src 2>;
 
@@ -169,8 +171,8 @@
 					reg = <0x70004000 0x4000>;
 					interrupts = <1>;
 					clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC1_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC1_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					status = "disabled";
 				};
@@ -180,8 +182,8 @@
 					reg = <0x70008000 0x4000>;
 					interrupts = <2>;
 					clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC2_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC2_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -192,7 +194,7 @@
 					reg = <0x7000c000 0x4000>;
 					interrupts = <33>;
 					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
-					         <&clks IMX5_CLK_UART3_PER_GATE>;
+						 <&clks IMX5_CLK_UART3_PER_GATE>;
 					clock-names = "ipg", "per";
 					status = "disabled";
 				};
@@ -204,7 +206,7 @@
 					reg = <0x70010000 0x4000>;
 					interrupts = <36>;
 					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
-					         <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+						 <&clks IMX5_CLK_ECSPI1_PER_GATE>;
 					clock-names = "ipg", "per";
 					status = "disabled";
 				};
@@ -229,8 +231,8 @@
 					reg = <0x70020000 0x4000>;
 					interrupts = <3>;
 					clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC3_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC3_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -241,8 +243,8 @@
 					reg = <0x70024000 0x4000>;
 					interrupts = <4>;
 					clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC4_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC4_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -364,7 +366,7 @@
 				reg = <0x73fa0000 0x4000>;
 				interrupts = <39>;
 				clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
-				         <&clks IMX5_CLK_GPT_HF_GATE>;
+					 <&clks IMX5_CLK_GPT_HF_GATE>;
 				clock-names = "ipg", "per";
 			};
 
@@ -378,7 +380,7 @@
 				compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
 				reg = <0x73fb4000 0x4000>;
 				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
-				         <&clks IMX5_CLK_PWM1_HF_GATE>;
+					 <&clks IMX5_CLK_PWM1_HF_GATE>;
 				clock-names = "ipg", "per";
 				interrupts = <61>;
 			};
@@ -388,7 +390,7 @@
 				compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
 				reg = <0x73fb8000 0x4000>;
 				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
-				         <&clks IMX5_CLK_PWM2_HF_GATE>;
+					 <&clks IMX5_CLK_PWM2_HF_GATE>;
 				clock-names = "ipg", "per";
 				interrupts = <94>;
 			};
@@ -398,7 +400,7 @@
 				reg = <0x73fbc000 0x4000>;
 				interrupts = <31>;
 				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
-				         <&clks IMX5_CLK_UART1_PER_GATE>;
+					 <&clks IMX5_CLK_UART1_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -408,7 +410,7 @@
 				reg = <0x73fc0000 0x4000>;
 				interrupts = <32>;
 				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
-				         <&clks IMX5_CLK_UART2_PER_GATE>;
+					 <&clks IMX5_CLK_UART2_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -456,7 +458,7 @@
 				reg = <0x83fac000 0x4000>;
 				interrupts = <37>;
 				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
-				         <&clks IMX5_CLK_ECSPI2_PER_GATE>;
+					 <&clks IMX5_CLK_ECSPI2_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -466,7 +468,7 @@
 				reg = <0x83fb0000 0x4000>;
 				interrupts = <6>;
 				clocks = <&clks IMX5_CLK_SDMA_GATE>,
-				         <&clks IMX5_CLK_SDMA_GATE>;
+					 <&clks IMX5_CLK_SDMA_GATE>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
@@ -479,7 +481,7 @@
 				reg = <0x83fc0000 0x4000>;
 				interrupts = <38>;
 				clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
-				         <&clks IMX5_CLK_CSPI_IPG_GATE>;
+					 <&clks IMX5_CLK_CSPI_IPG_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -582,8 +584,8 @@
 				reg = <0x83fec000 0x4000>;
 				interrupts = <87>;
 				clocks = <&clks IMX5_CLK_FEC_GATE>,
-				         <&clks IMX5_CLK_FEC_GATE>,
-				         <&clks IMX5_CLK_FEC_GATE>;
+					 <&clks IMX5_CLK_FEC_GATE>,
+					 <&clks IMX5_CLK_FEC_GATE>;
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/imx53-m53.dtsi b/arch/arm/boot/dts/imx53-m53.dtsi
index d259f57..ec390aa5 100644
--- a/arch/arm/boot/dts/imx53-m53.dtsi
+++ b/arch/arm/boot/dts/imx53-m53.dtsi
@@ -12,8 +12,8 @@
 #include "imx53.dtsi"
 
 / {
-	model = "DENX M53";
-	compatible = "denx,imx53-m53", "fsl,imx53";
+	model = "Aries/DENX M53";
+	compatible = "aries,imx53-m53", "denx,imx53-m53", "fsl,imx53";
 
 	memory {
 		reg = <0x70000000 0x20000000>,
diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
index dcee1e0f..4347a32 100644
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ b/arch/arm/boot/dts/imx53-m53evk.dts
@@ -13,8 +13,8 @@
 #include "imx53-m53.dtsi"
 
 / {
-	model = "DENX M53EVK";
-	compatible = "denx,imx53-m53evk", "fsl,imx53";
+	model = "Aries/DENX M53EVK";
+	compatible = "aries,imx53-m53evk", "denx,imx53-m53evk", "fsl,imx53";
 
 	display1: display@di1 {
 		compatible = "fsl,imx-parallel-display";
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 0777b41..ca51dc0 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -10,7 +10,6 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-#include "skeleton.dtsi"
 #include "imx53-pinfunc.h"
 #include <dt-bindings/clock/imx5-clock.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -18,6 +17,9 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	aliases {
 		ethernet0 = &fec;
 		gpio0 = &gpio1;
@@ -131,8 +133,8 @@
 			reg = <0x18000000 0x08000000>;
 			interrupts = <11 10>;
 			clocks = <&clks IMX5_CLK_IPU_GATE>,
-			         <&clks IMX5_CLK_IPU_DI0_GATE>,
-			         <&clks IMX5_CLK_IPU_DI1_GATE>;
+				 <&clks IMX5_CLK_IPU_DI0_GATE>,
+				 <&clks IMX5_CLK_IPU_DI1_GATE>;
 			clock-names = "bus", "di0", "di1";
 			resets = <&src 2>;
 
@@ -199,8 +201,8 @@
 					reg = <0x50004000 0x4000>;
 					interrupts = <1>;
 					clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC1_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC1_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -211,8 +213,8 @@
 					reg = <0x50008000 0x4000>;
 					interrupts = <2>;
 					clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC2_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC2_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -223,7 +225,7 @@
 					reg = <0x5000c000 0x4000>;
 					interrupts = <33>;
 					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
-					         <&clks IMX5_CLK_UART3_PER_GATE>;
+						 <&clks IMX5_CLK_UART3_PER_GATE>;
 					clock-names = "ipg", "per";
 					dmas = <&sdma 42 4 0>, <&sdma 43 4 0>;
 					dma-names = "rx", "tx";
@@ -237,7 +239,7 @@
 					reg = <0x50010000 0x4000>;
 					interrupts = <36>;
 					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
-					         <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+						 <&clks IMX5_CLK_ECSPI1_PER_GATE>;
 					clock-names = "ipg", "per";
 					status = "disabled";
 				};
@@ -264,8 +266,8 @@
 					reg = <0x50020000 0x4000>;
 					interrupts = <3>;
 					clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC3_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC3_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -276,8 +278,8 @@
 					reg = <0x50024000 0x4000>;
 					interrupts = <4>;
 					clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC4_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC4_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -419,7 +421,7 @@
 				reg = <0x53fa0000 0x4000>;
 				interrupts = <39>;
 				clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
-				         <&clks IMX5_CLK_GPT_HF_GATE>;
+					 <&clks IMX5_CLK_GPT_HF_GATE>;
 				clock-names = "ipg", "per";
 			};
 
@@ -440,11 +442,11 @@
 				reg = <0x53fa8008 0x4>;
 				gpr = <&gpr>;
 				clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
-				         <&clks IMX5_CLK_LDB_DI1_SEL>,
-				         <&clks IMX5_CLK_IPU_DI0_SEL>,
-				         <&clks IMX5_CLK_IPU_DI1_SEL>,
-				         <&clks IMX5_CLK_LDB_DI0_GATE>,
-				         <&clks IMX5_CLK_LDB_DI1_GATE>;
+					 <&clks IMX5_CLK_LDB_DI1_SEL>,
+					 <&clks IMX5_CLK_IPU_DI0_SEL>,
+					 <&clks IMX5_CLK_IPU_DI1_SEL>,
+					 <&clks IMX5_CLK_LDB_DI0_GATE>,
+					 <&clks IMX5_CLK_LDB_DI1_GATE>;
 				clock-names = "di0_pll", "di1_pll",
 					      "di0_sel", "di1_sel",
 					      "di0", "di1";
@@ -486,7 +488,7 @@
 				compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
 				reg = <0x53fb4000 0x4000>;
 				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
-				         <&clks IMX5_CLK_PWM1_HF_GATE>;
+					 <&clks IMX5_CLK_PWM1_HF_GATE>;
 				clock-names = "ipg", "per";
 				interrupts = <61>;
 			};
@@ -496,7 +498,7 @@
 				compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
 				reg = <0x53fb8000 0x4000>;
 				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
-				         <&clks IMX5_CLK_PWM2_HF_GATE>;
+					 <&clks IMX5_CLK_PWM2_HF_GATE>;
 				clock-names = "ipg", "per";
 				interrupts = <94>;
 			};
@@ -506,7 +508,7 @@
 				reg = <0x53fbc000 0x4000>;
 				interrupts = <31>;
 				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
-				         <&clks IMX5_CLK_UART1_PER_GATE>;
+					 <&clks IMX5_CLK_UART1_PER_GATE>;
 				clock-names = "ipg", "per";
 				dmas = <&sdma 18 4 0>, <&sdma 19 4 0>;
 				dma-names = "rx", "tx";
@@ -518,7 +520,7 @@
 				reg = <0x53fc0000 0x4000>;
 				interrupts = <32>;
 				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
-				         <&clks IMX5_CLK_UART2_PER_GATE>;
+					 <&clks IMX5_CLK_UART2_PER_GATE>;
 				clock-names = "ipg", "per";
 				dmas = <&sdma 12 4 0>, <&sdma 13 4 0>;
 				dma-names = "rx", "tx";
@@ -530,7 +532,7 @@
 				reg = <0x53fc8000 0x4000>;
 				interrupts = <82>;
 				clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>,
-				         <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
+					 <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -540,7 +542,7 @@
 				reg = <0x53fcc000 0x4000>;
 				interrupts = <83>;
 				clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>,
-				         <&clks IMX5_CLK_CAN2_SERIAL_GATE>;
+					 <&clks IMX5_CLK_CAN2_SERIAL_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -603,7 +605,7 @@
 				reg = <0x53ff0000 0x4000>;
 				interrupts = <13>;
 				clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
-				         <&clks IMX5_CLK_UART4_PER_GATE>;
+					 <&clks IMX5_CLK_UART4_PER_GATE>;
 				clock-names = "ipg", "per";
 				dmas = <&sdma 2 4 0>, <&sdma 3 4 0>;
 				dma-names = "rx", "tx";
@@ -635,7 +637,7 @@
 				reg = <0x63f90000 0x4000>;
 				interrupts = <86>;
 				clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
-				         <&clks IMX5_CLK_UART5_PER_GATE>;
+					 <&clks IMX5_CLK_UART5_PER_GATE>;
 				clock-names = "ipg", "per";
 				dmas = <&sdma 16 4 0>, <&sdma 17 4 0>;
 				dma-names = "rx", "tx";
@@ -656,7 +658,7 @@
 				reg = <0x63fac000 0x4000>;
 				interrupts = <37>;
 				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
-				         <&clks IMX5_CLK_ECSPI2_PER_GATE>;
+					 <&clks IMX5_CLK_ECSPI2_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -666,7 +668,7 @@
 				reg = <0x63fb0000 0x4000>;
 				interrupts = <6>;
 				clocks = <&clks IMX5_CLK_SDMA_GATE>,
-				         <&clks IMX5_CLK_SDMA_GATE>;
+					 <&clks IMX5_CLK_SDMA_GATE>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
@@ -679,7 +681,7 @@
 				reg = <0x63fc0000 0x4000>;
 				interrupts = <38>;
 				clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
-				         <&clks IMX5_CLK_CSPI_IPG_GATE>;
+					 <&clks IMX5_CLK_CSPI_IPG_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -755,8 +757,8 @@
 				reg = <0x63fec000 0x4000>;
 				interrupts = <87>;
 				clocks = <&clks IMX5_CLK_FEC_GATE>,
-				         <&clks IMX5_CLK_FEC_GATE>,
-				         <&clks IMX5_CLK_FEC_GATE>;
+					 <&clks IMX5_CLK_FEC_GATE>,
+					 <&clks IMX5_CLK_FEC_GATE>;
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";
 			};
@@ -766,7 +768,7 @@
 				reg = <0x63ff0000 0x1000>;
 				interrupts = <92>;
 				clocks = <&clks IMX5_CLK_TVE_GATE>,
-				         <&clks IMX5_CLK_IPU_DI1_SEL>;
+					 <&clks IMX5_CLK_IPU_DI1_SEL>;
 				clock-names = "tve", "di_sel";
 				status = "disabled";
 
@@ -782,7 +784,7 @@
 				reg = <0x63ff4000 0x1000>;
 				interrupts = <9>;
 				clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
-				         <&clks IMX5_CLK_VPU_GATE>;
+					 <&clks IMX5_CLK_VPU_GATE>;
 				clock-names = "per", "ahb";
 				resets = <&src 1>;
 				iram = <&ocram>;
@@ -793,7 +795,7 @@
 				reg = <0x63ff8000 0x4000>;
 				interrupts = <19 20>;
 				clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>,
-				         <&clks IMX5_CLK_SAHARA_IPG_GATE>;
+					 <&clks IMX5_CLK_SAHARA_IPG_GATE>;
 				clock-names = "ipg", "ahb";
 			};
 		};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
new file mode 100644
index 0000000..e0c2172
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
@@ -0,0 +1,253 @@
+/*
+ * Copyright 2014-2016 Toradex AG
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6dl.dtsi"
+#include "imx6qdl-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri_imx6dl-eval-v3", "toradex,colibri_imx6dl",
+		     "fsl,imx6dl";
+
+	aliases {
+		i2c0 = &i2c2;
+		i2c1 = &i2c3;
+	};
+
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	clocks {
+		/* Fixed crystal dedicated to mcp251x */
+		clk16m: clk@1 {
+			compatible = "fixed-clock";
+			reg = <1>;
+			#clock-cells = <0>;
+			clock-frequency = <16000000>;
+			clock-output-names = "clk16m";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		wakeup {
+			label = "Wake-Up";
+			gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	lcd_display: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel: panel {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+};
+
+&backlight {
+	brightness-levels = <0 127 191 223 239 247 251 255>;
+	default-brightness-level = <1>;
+	status = "okay";
+};
+
+/* Colibri SSP */
+&ecspi4 {
+	status = "okay";
+
+	mcp251x0: mcp251x@1 {
+		compatible = "microchip,mcp2515";
+		reg = <0>;
+		clocks = <&clk16m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <27 0x2>;
+		spi-max-frequency = <10000000>;
+		status = "okay";
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+/*
+ * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
+ */
+&i2c3 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t00";
+		reg = <0x68>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_host_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mmc_cd>;
+	cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */
+	status = "okay";
+};
+
+&weim {
+	status = "okay";
+
+	/* weim memory map: 32MB on CS0, 32MB on CS1, 32MB on CS2 */
+	ranges = <0 0 0x08000000 0x02000000
+		  1 0 0x0a000000 0x02000000
+		  2 0 0x0c000000 0x02000000>;
+
+	/* SRAM on Colibri nEXT_CS0 */
+	sram@0,0 {
+		compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram";
+		reg = <0 0 0x00010000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <2>;
+		fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000
+				      0x00000000 0x04000040 0x00000000>;
+	};
+
+	/* SRAM on Colibri nEXT_CS1 */
+	sram@1,0 {
+		compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram";
+		reg = <1 0 0x00010000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <2>;
+		fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000
+				      0x00000000 0x04000040 0x00000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-icore.dts b/arch/arm/boot/dts/imx6dl-icore.dts
new file mode 100644
index 0000000..aec332c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-icore.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 DualLite/Solo Starter Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6dl";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 75d7343..2cb7282 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -390,7 +390,7 @@
 				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030		/* AR8035 pin strapping: MODE#3: pull up */
 				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x130b0		/* AR8035 pin strapping: MODE#0: pull down */
 				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8	/* GPIO16 -> AR8035 25MHz */
-			        MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x130b0		/* RGMII_nRST */
+				MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x130b0		/* RGMII_nRST */
 				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x180b0		/* AR8035 interrupt */
 				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
 			>;
diff --git a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
index 063fe75..aac42ac 100644
--- a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
@@ -105,7 +105,7 @@
 				pixelclk-active = <1>;
 			};
 		};
-        };
+	};
 };
 
 &can1 {
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
index b7a7284..d1f1298 100644
--- a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
@@ -199,7 +199,7 @@
 				pixelclk-active = <0>;
 			};
 		};
-        };
+	};
 };
 
 &ipu1_di0_disp0 {
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
index 207b85b..0ea75f7 100644
--- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
@@ -147,28 +147,6 @@
 			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
 		};
 	};
-
-	pwmleds {
-		compatible = "pwm-leds";
-
-		ledpwm1 {
-			label = "PWM1";
-			pwms = <&pwm1 0 50000>;
-			max-brightness = <255>;
-		};
-
-		ledpwm2 {
-			label = "PWM2";
-			pwms = <&pwm2 0 50000>;
-			max-brightness = <255>;
-		};
-
-		ledpwm3 {
-			label = "PWM3";
-			pwms = <&pwm3 0 50000>;
-			max-brightness = <255>;
-		};
-	};
 };
 
 &backlight {
diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts
index d853887..1dcaee2 100644
--- a/arch/arm/boot/dts/imx6q-b650v3.dts
+++ b/arch/arm/boot/dts/imx6q-b650v3.dts
@@ -98,3 +98,9 @@
 		line-name = "PCA9539-P05";
 	};
 };
+
+&usbphy1 {
+	fsl,tx-cal-45-dn-ohms = <55>;
+	fsl,tx-cal-45-dp-ohms = <55>;
+	fsl,tx-d-cal = <100>;
+};
diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts
index 6de21ff..7c7c1a8 100644
--- a/arch/arm/boot/dts/imx6q-evi.dts
+++ b/arch/arm/boot/dts/imx6q-evi.dts
@@ -232,10 +232,7 @@
 };
 
 &weim {
-	#address-cells = <2>;
-	#size-cells = <1>;
 	ranges = <0 0 0x08000000 0x08000000>;
-	fsl,weim-cs-gpr = <&gpr>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_weimfpga &pinctrl_weimcs>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6q-icore.dts b/arch/arm/boot/dts/imx6q-icore.dts
new file mode 100644
index 0000000..025f543
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-icore.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 Quad/Dual Starter Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6q";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
new file mode 100644
index 0000000..cf4feef
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-nitrogen6_som2.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 Quad Nitrogen6_SOM2 Board";
+	compatible = "boundary,imx6q-nitrogen6_som2", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts
index 1723e89e..758bca9 100644
--- a/arch/arm/boot/dts/imx6q-novena.dts
+++ b/arch/arm/boot/dts/imx6q-novena.dts
@@ -451,6 +451,10 @@
 	status = "okay";
 };
 
+&pwm1 {
+	status = "okay";
+};
+
 &sata {
 	target-supply = <&reg_sata>;
 	fsl,transmit-level-mV = <1025>;
diff --git a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
index c139ac0..1f47713 100644
--- a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
+++ b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
@@ -23,5 +23,5 @@
 };
 
 &sata {
-        status = "okay";
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
index 65e95ae..71746ed 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
@@ -105,7 +105,7 @@
 				pixelclk-active = <1>;
 			};
 		};
-        };
+	};
 };
 
 &can1 {
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/imx6q-tx6q-1010.dts
index 20cd0e7..f9cd21a 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1010.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1010.dts
@@ -199,7 +199,7 @@
 				pixelclk-active = <0>;
 			};
 		};
-        };
+	};
 };
 
 &ipu1_di0_disp0 {
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
index 9ed243b..959ff3fb 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
@@ -105,7 +105,7 @@
 				pixelclk-active = <1>;
 			};
 		};
-        };
+	};
 };
 
 &can1 {
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020.dts b/arch/arm/boot/dts/imx6q-tx6q-1020.dts
index 347b531..b49133d 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1020.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1020.dts
@@ -199,7 +199,7 @@
 				pixelclk-active = <0>;
 			};
 		};
-        };
+	};
 };
 
 &ds1339 {
diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts
index 6199063..2200994 100644
--- a/arch/arm/boot/dts/imx6q-utilite-pro.dts
+++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts
@@ -68,7 +68,41 @@
 			label = "Power Button";
 			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
+		};
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1mux>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mux-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		i2c-parent = <&i2c1>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "at24,24c02";
+				reg = <0x50>;
+				pagesize = <16>;
+			};
+
+			em3027: rtc@56 {
+				compatible = "emmicro,em3027";
+				reg = <0x56>;
+			};
+		};
+
+		i2c_dvi_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 	};
 };
@@ -82,17 +116,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
-
-	eeprom@50 {
-		compatible = "at24,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	em3027: rtc@56 {
-		compatible = "emmicro,em3027";
-		reg = <0x56>;
-	};
 };
 
 &i2c2 {
@@ -115,6 +138,12 @@
 		>;
 	};
 
+	pinctrl_i2c1mux: i2c1muxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+		>;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 99e323b..8c8a049 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -49,7 +49,10 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_bl_on>;
 		pwms = <&pwm4 0 5000000>;
+		enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
 		status = "disabled";
 	};
 
@@ -620,6 +623,12 @@
 		>;
 	};
 
+	pinctrl_gpio_bl_on: gpioblon {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0
+		>;
+	};
+
 	pinctrl_gpio_keys: gpio1io04grp {
 		fsl,pins = <
 			/* Power button */
diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
index edbce22..5e7792d 100644
--- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
@@ -347,13 +347,13 @@
 			fsl,pins = <
 				MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x100b1
 				MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x100b1
-				MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 	0x100b1
-				MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 	0x100b1
-				MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 	0x100b1
-				MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 	0x100b1
-				MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 	0x100b1
-				MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 	0x100b1
-				MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21  	0x100b1
+				MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x100b1
+				MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x100b1
+				MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x100b1
+				MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x100b1
+				MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x100b1
+				MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x100b1
+				MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x100b1
 			>;
 		};
 
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
new file mode 100644
index 0000000..e6faa65
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -0,0 +1,890 @@
+/*
+ * Copyright 2014-2016 Toradex AG
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Toradex Colibri iMX6DL/S Module";
+	compatible = "toradex,colibri_imx6dl", "fsl,imx6dl";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_bl_on>;
+		pwms = <&pwm3 0 5000000>;
+		enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */
+		status = "disabled";
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_host_vbus: regulator-usb-host-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
+		regulator-name = "usb_host_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */
+		status = "disabled";
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6dl-colibri-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HP_OUT",
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias";
+		mux-int-port = <1>;
+		mux-ext-port = <5>;
+	};
+
+	/* Optional S/PDIF in on SODIMM 88 and out on SODIMM 90, 137 or 168 */
+	sound_spdif: sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-in;
+		spdif-out;
+		status = "disabled";
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux &pinctrl_mic_gnd>;
+	status = "okay";
+};
+
+/* Optional on SODIMM 55/63 */
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
+/* Optional on SODIMM 178/188 */
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "disabled";
+};
+
+/* Colibri SSP */
+&ecspi4 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	status = "disabled";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_ddc>;
+	status = "disabled";
+};
+
+/*
+ * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+ * touch screen controller
+ */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vgen1: unused */
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vgen3: unused */
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	/* STMPE811 touch screen controller */
+	stmpe811@41 {
+		compatible = "st,stmpe811";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch_int>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x41>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio6>;
+		interrupt-controller;
+		id = <0>;
+		blocks = <0x5>;
+		irq-trigger = <0x1>;
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			reg = <0>;
+			/* 3.25 MHz ADC clock speed */
+			st,adc-freq = <1>;
+			/* 8 sample average control */
+			st,ave-ctrl = <3>;
+			/* 7 length fractional part in z */
+			st,fraction-z = <7>;
+			/*
+			 * 50 mA typical 80 mA max touchscreen drivers
+			 * current limit value
+			 */
+			st,i-drive = <1>;
+			/* 12-bit ADC */
+			st,mod-12b = <1>;
+			/* internal ADC reference */
+			st,ref-sel = <0>;
+			/* ADC converstion time: 80 clocks */
+			st,sample-time = <4>;
+			/* 1 ms panel driver settling time */
+			st,settling = <3>;
+			/* 5 ms touch detect interrupt delay */
+			st,touch-det-delay = <5>;
+		};
+	};
+};
+
+/*
+ * I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
+ */
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "recovery";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_recovery>;
+	scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+	status = "disabled";
+};
+
+/* Colibri PWM<B> */
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "disabled";
+};
+
+/* Colibri PWM<D> */
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "disabled";
+};
+
+/* Colibri PWM<A> */
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "disabled";
+};
+
+/* Colibri PWM<C> */
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "disabled";
+};
+
+/* Optional S/PDIF out on SODIMM 137 */
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "disabled";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
+	fsl,dte-mode;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+/* Colibri UART_B */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_dte>;
+	fsl,dte-mode;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+/* Colibri UART_C */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_dte>;
+	fsl,dte-mode;
+	status = "disabled";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	disable-over-current;
+	dr_mode = "peripheral";
+	status = "disabled";
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	vqmmc-supply = <&reg_3p3v>;
+	bus-width = <4>;
+	voltage-ranges = <3300 3300>;
+	status = "disabled";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vqmmc-supply = <&reg_3p3v>;
+	bus-width = <8>;
+	voltage-ranges = <3300 3300>;
+	non-removable;
+	status = "okay";
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim_sram  &pinctrl_weim_cs0
+		     &pinctrl_weim_cs1   &pinctrl_weim_cs2
+		     &pinctrl_weim_rdnwr &pinctrl_weim_npwe>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__AUD5_TXC	0x130b0
+			MX6QDL_PAD_KEY_ROW0__AUD5_TXD	0x130b0
+			MX6QDL_PAD_KEY_COL1__AUD5_TXFS	0x130b0
+			MX6QDL_PAD_KEY_ROW1__AUD5_RXD	0x130b0
+			/* SGTL5000 sys_mclk */
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x000b0
+		>;
+	};
+
+	pinctrl_cam_mclk: cammclkgrp {
+		fsl,pins = <
+			/* Parallel Camera CAM sys_mclk */
+			MX6QDL_PAD_NANDF_CS2__CCM_CLKO2	0x00b0
+		>;
+	};
+
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__ECSPI4_MISO	0x100b1
+			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI	0x100b1
+			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+			/* SPI CS */
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02	0x000b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK     ((1<<30) | 0x1b0b0)
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_bl_on: gpioblon {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__GPIO3_IO26		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeys {
+		fsl,pins = <
+			/* Power button */
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmi_ddc: hdmiddcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_recovery: i2c3recoverygrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp { /* Parallel Camera */
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12	0xb0b1
+			MX6QDL_PAD_EIM_A18__IPU1_CSI1_DATA13	0xb0b1
+			MX6QDL_PAD_EIM_A19__IPU1_CSI1_DATA14	0xb0b1
+			MX6QDL_PAD_EIM_A20__IPU1_CSI1_DATA15	0xb0b1
+			MX6QDL_PAD_EIM_A21__IPU1_CSI1_DATA16	0xb0b1
+			MX6QDL_PAD_EIM_A22__IPU1_CSI1_DATA17	0xb0b1
+			MX6QDL_PAD_EIM_A23__IPU1_CSI1_DATA18	0xb0b1
+			MX6QDL_PAD_EIM_A24__IPU1_CSI1_DATA19	0xb0b1
+			MX6QDL_PAD_EIM_D17__IPU1_CSI1_PIXCLK	0xb0b1
+			MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC	0xb0b1
+			MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC	0xb0b1
+			/* Disable PWM pins on camera interface */
+			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09		0x40
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01		0x40
+		>;
+	};
+
+	pinctrl_ipu1_lcdif: ipu1lcdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0xa1
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0xa1
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0xa1
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0xa1
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0xa1
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0xa1
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0xa1
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0xa1
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0xa1
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0xa1
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0xa1
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0xa1
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0xa1
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0xa1
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0xa1
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0xa1
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0xa1
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0xa1
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0xa1
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0xa1
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0xa1
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0xa1
+		>;
+	};
+
+	pinctrl_mic_gnd: gpiomicgnd {
+		fsl,pins = <
+			/* Controls Mic GND, PU or '1' pull Mic GND to GND */
+			MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x1b0b0
+		>;
+	};
+
+	pinctrl_mmc_cd: gpiommccd {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05	0x80000000
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT	0x1b0b1
+			MX6QDL_PAD_EIM_A21__GPIO2_IO17	0x00040
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT	0x1b0b1
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16	0x00040
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp {
+		fsl,pins = <
+			/* USBH_EN */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31	0x0f058
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
+		>;
+	};
+
+	pinctrl_touch_int: gpiotouchintgrp {
+		fsl,pins = <
+			/* STMPE811 interrupt */
+			MX6QDL_PAD_RGMII_TD0__GPIO6_IO20 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1_dce: uart1dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart1_dte: uart1dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D19__UART1_RTS_B	0x1b0b1
+			MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1
+		>;
+	};
+
+	/* Additional DTR, DSR, DCD */
+	pinctrl_uart1_ctrl: uart1ctrlgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
+			MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
+			MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2_dte: uart2dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3_dte: uart3dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CLK__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_CMD__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbc_det: usbcdetgrp {
+		fsl,pins = <
+			/* USBC_DET */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+			/* USBC_DET_EN */
+			MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26	0x0f058
+			/* USBC_DET_OVERWRITE */
+			MX6QDL_PAD_RGMII_RXC__GPIO6_IO30	0x0f058
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x10071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x17071
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
+			/* eMMC reset */
+			MX6QDL_PAD_SD3_RST__SD3_RESET	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3100mhzgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x170b9
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x170b9
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x170b9
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x170b9
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x170b9
+			/* eMMC reset */
+			MX6QDL_PAD_SD3_RST__SD3_RESET	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3200mhzgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x170f9
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x170f9
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x170f9
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x170f9
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x170f9
+			/* eMMC reset */
+			MX6QDL_PAD_SD3_RST__SD3_RESET	0x170f9
+		>;
+	};
+
+	pinctrl_weim_cs0: weimcs0grp {
+		fsl,pins = <
+			/* nEXT_CS0 */
+			MX6QDL_PAD_EIM_CS0__EIM_CS0_B	0xb0b1
+		>;
+	};
+
+	pinctrl_weim_cs1: weimcs1grp {
+		fsl,pins = <
+			/* nEXT_CS1 */
+			MX6QDL_PAD_EIM_CS1__EIM_CS1_B	0xb0b1
+		>;
+	};
+
+	pinctrl_weim_cs2: weimcs2grp {
+		fsl,pins = <
+			/* nEXT_CS2 */
+			MX6QDL_PAD_SD2_DAT1__EIM_CS2_B	0xb0b1
+		>;
+	};
+
+	pinctrl_weim_sram: weimsramgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
+			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
+			/* Data */
+			MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00	0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT4__EIM_DATA02	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__EIM_DATA03	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__EIM_DATA04	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT7__EIM_DATA05	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT8__EIM_DATA06	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__EIM_DATA07	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT12__EIM_DATA08	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__EIM_DATA09	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__EIM_DATA10	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__EIM_DATA11	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__EIM_DATA12	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__EIM_DATA13	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__EIM_DATA14	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__EIM_DATA15	0x1b0b0
+			/* Address */
+			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
+			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
+			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
+			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
+			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
+			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
+			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
+			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
+			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
+			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
+			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
+			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
+			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
+			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
+			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
+			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
+		>;
+	};
+
+	pinctrl_weim_rdnwr: weimrdnwr {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CLK__GPIO1_IO10		0x0040
+			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23	0x130b0
+		>;
+	};
+
+	pinctrl_weim_npwe: weimnpwe {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x0040
+			MX6QDL_PAD_RGMII_TD2__GPIO6_IO22	0x130b0
+		>;
+	};
+
+	/* ADDRESS[16:18] [25] used as GPIO */
+	pinctrl_weim_gpio_1: weimgpio-1 {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+		>;
+	};
+
+	/* ADDRESS[19:24] used as GPIO */
+	pinctrl_weim_gpio_2: weimgpio-2 {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+		>;
+	};
+
+	/* DATA[16:31] used as GPIO */
+	pinctrl_weim_gpio_3: weimgpio-3 {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x1b0b0
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x1b0b0
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x1b0b0
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b0
+			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0
+			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x1b0b0
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x1b0b0
+			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x1b0b0
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b0
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b0
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+		>;
+	};
+
+	/* DQM[0:3] used as GPIO */
+	pinctrl_weim_gpio_4: weimgpio-4 {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0
+			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0
+			MX6QDL_PAD_SD2_DAT2__GPIO1_IO13		0x1b0b0
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
+		>;
+	};
+
+	/* RDY used as GPIO */
+	pinctrl_weim_gpio_5: weimgpio-5 {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b0b0
+		>;
+	};
+
+	/* ADDRESS[16] DATA[30] used as GPIO */
+	pinctrl_weim_gpio_6: weimgpio-6 {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index a7100f9..54aca3a 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -153,9 +153,9 @@
 
 &clks {
 	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-	                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 };
 
 &ecspi3 {
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 8953eba..88e5cb3 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -154,9 +154,9 @@
 
 &clks {
 	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-	                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 };
 
 &fec {
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 6ac41c7..1753ab7 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -144,9 +144,9 @@
 
 &clks {
 	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-	                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 };
 
 &fec {
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index 805e236..ee83161 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -291,7 +291,7 @@
 				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
 				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
 			>;
-                };
+		};
 
 		pinctrl_wdog: wdoggrp {
 			fsl,pins = <
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
new file mode 100644
index 0000000..023839a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -0,0 +1,265 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	rmii_clk: clock-rmii-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;  /* 25MHz for example */
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3p3v>;
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_3p3v>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b0b1
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23	0x1b0b0
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b020
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b020
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpmi-nand {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS      0x00b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL  0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x130b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17070
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10070
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17070
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17070
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17070
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17070
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
index 880bd78..63acd54 100644
--- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
@@ -97,15 +97,6 @@
 		};
 	};
 
-	bt_rfkill {
-		compatible = "rfkill-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_bt_rfkill>;
-		gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
-		name = "bt_rfkill";
-		type = <2>;
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -160,7 +151,7 @@
 		};
 	};
 
-	backlight_lcd {
+	backlight-lcd {
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -169,7 +160,7 @@
 		status = "okay";
 	};
 
-	backlight_lvds0: backlight_lvds0 {
+	backlight_lvds0: backlight-lvds0 {
 		compatible = "pwm-backlight";
 		pwms = <&pwm4 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -178,7 +169,7 @@
 		status = "okay";
 	};
 
-	panel_lvds0 {
+	panel-lvds0 {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds0>;
 
@@ -328,19 +319,6 @@
 			>;
 		};
 
-		pinctrl_bt_rfkill: bt_rfkillgrp {
-			fsl,pins = <
-				/* BT wake */
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
-				/* BT reset */
-				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x0b0b0
-				/* BT reg en */
-				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0
-				/* BT host wake irq */
-				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x100b0
-			>;
-		};
-
 		pinctrl_ecspi1: ecspi1grp {
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
@@ -374,7 +352,7 @@
 			>;
 		};
 
-		pinctrl_gpio_keys: gpio_keysgrp {
+		pinctrl_gpio_keys: gpio-keysgrp {
 			fsl,pins = <
 				/* Home Button: J14 pin 5 */
 				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
@@ -457,7 +435,7 @@
 			>;
 		};
 
-		pinctrl_wlan_vmmc: wlan_vmmcgrp {
+		pinctrl_wlan_vmmc: wlan-vmmcgrp {
 			fsl,pins = <
 				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x030b0
 			>;
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
index b0b3220..34887a1 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
@@ -229,7 +229,7 @@
 		};
 	};
 
-	backlight_lcd: backlight_lcd {
+	backlight_lcd: backlight-lcd {
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -238,7 +238,7 @@
 		status = "okay";
 	};
 
-	backlight_lvds0: backlight_lvds0 {
+	backlight_lvds0: backlight-lvds0 {
 		compatible = "pwm-backlight";
 		pwms = <&pwm4 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -247,7 +247,7 @@
 		status = "okay";
 	};
 
-	backlight_lvds1: backlight_lvds1 {
+	backlight_lvds1: backlight-lvds1 {
 		compatible = "pwm-backlight";
 		pwms = <&pwm2 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -282,7 +282,7 @@
 		};
 	};
 
-	panel_lcd {
+	panel-lcd {
 		compatible = "okaya,rs800480t-7x0gp";
 		backlight = <&backlight_lcd>;
 
@@ -293,7 +293,7 @@
 		};
 	};
 
-	panel_lvds0 {
+	panel-lvds0 {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds0>;
 
@@ -304,7 +304,7 @@
 		};
 	};
 
-	panel_lvds1 {
+	panel-lvds1 {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds1>;
 
@@ -447,7 +447,7 @@
 };
 
 &iomuxc {
-	imx6q-nitrogen6_max {
+	imx6q-nitrogen6-max {
 		pinctrl_audmux: audmuxgrp {
 			fsl,pins = <
 				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
@@ -504,7 +504,7 @@
 			>;
 		};
 
-		pinctrl_gpio_keys: gpio_keysgrp {
+		pinctrl_gpio_keys: gpio-keysgrp {
 			fsl,pins = <
 				/* Power Button */
 				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
@@ -720,7 +720,7 @@
 			>;
 		};
 
-		pinctrl_wlan_vmmc: wlan_vmmcgrp {
+		pinctrl_wlan_vmmc: wlan-vmmcgrp {
 			fsl,pins = <
 				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x100b0
 				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
new file mode 100644
index 0000000..d80f21a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
@@ -0,0 +1,770 @@
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds0: backlight-lvds0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds1: backlight-lvds1 {
+		compatible = "gpio-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_lvds1>;
+		gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		default-on;
+		status = "okay";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		menu {
+			label = "Menu";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+
+		home {
+			label = "Home";
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	lcd_display: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel-lcd {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	panel-lvds0 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds0>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	panel-lvds1 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds1>;
+
+		port {
+			panel_in_lvds1: endpoint {
+				remote-endpoint = <&lvds1_out>;
+			};
+		};
+	};
+
+	reg_1p8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_can_xcvr: regulator-can-xcvr {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN XCVR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_xcvr>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_wlan_vmmc: regulator-wlan-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan_vmmc>;
+		regulator-name = "reg_wlan_vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx6q-nitrogen6_som2-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-nitrogen6_som2-sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		compatible = "microchip,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	rtc@68 {
+		compatible = "st,rv4162";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rv4162>;
+		reg = <0x68>;
+		interrupts-extended = <&gpio6 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_backlight_lvds1: backlight-lvds1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x0b0b0
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_can_xcvr: can-xcvrgrp {
+		fsl,pins = <
+			/* Flexcan XCVR enable */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x0b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x130b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x130b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x130b0
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x030b0
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			/* Power Button */
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+			/* Menu Button */
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+			/* Home Button */
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+			/* Back Button */
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+			/* Volume Up Button */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+			/* Volume Down Button */
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
+			MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c3mux: i2c3muxgrp {
+		fsl,pins = <
+			/* PCIe I2C enable */
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25	0x000b0
+		>;
+	};
+
+	pinctrl_j15: j15grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			/* PCIe reset */
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31	0x030b0
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04	0x030b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT	0x030b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT	0x030b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT	0x030b1
+		>;
+	};
+
+	pinctrl_rv4162: rv4162grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x1b0b0
+		>;
+	};
+
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x130b0
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02		0x130b0
+			MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24	0x130b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x030b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
+			/* power enable, high active */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x030b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10071
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17071
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17071
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17071
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17071
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17071
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10071
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17071
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17071
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17071
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17071
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17071
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_wlan_vmmc: wlan-vmmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x100b0
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x030b0
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x030b0
+			MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
+		>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+
+	lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds1_out: endpoint {
+				remote-endpoint = <&panel_in_lvds1>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wlan_vmmc>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&reg_1p8v>;
+	keep-power-in-suspend;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index db868bc..e476d01 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -167,7 +167,7 @@
 		mux-ext-port = <3>;
 	};
 
-	backlight_lcd: backlight_lcd {
+	backlight_lcd: backlight-lcd {
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -176,7 +176,7 @@
 		status = "okay";
 	};
 
-	backlight_lvds: backlight_lvds {
+	backlight_lvds: backlight-lvds {
 		compatible = "pwm-backlight";
 		pwms = <&pwm4 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -211,7 +211,7 @@
 		};
 	};
 
-	lcd_panel {
+	panel-lcd {
 		compatible = "okaya,rs800480t-7x0gp";
 		backlight = <&backlight_lcd>;
 
@@ -222,7 +222,7 @@
 		};
 	};
 
-	panel {
+	panel-lvds0 {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds>;
 
@@ -413,7 +413,7 @@
 			>;
 		};
 
-		pinctrl_gpio_keys: gpio_keysgrp {
+		pinctrl_gpio_keys: gpio-keysgrp {
 			fsl,pins = <
 				/* Power Button */
 				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
@@ -561,7 +561,7 @@
 			>;
 		};
 
-		pinctrl_wlan_vmmc: wlan_vmmcgrp {
+		pinctrl_wlan_vmmc: wlan-vmmcgrp {
 			fsl,pins = <
 				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x100b0
 				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index e0280cac2..e9801a2 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -427,10 +427,10 @@
 };
 
 &usdhc3 {
-        pinctrl-names = "default";
-        pinctrl-0 = <&pinctrl_usdhc3
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3
 		     &pinctrl_usdhc3_cdwp>;
 	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-        status = "disabled";
+	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index e000e6f..52390ba 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -283,7 +283,7 @@
 		VD-supply = <&reg_audio>;
 		VLS-supply = <&reg_audio>;
 		VLC-supply = <&reg_audio>;
-        };
+	};
 
 };
 
@@ -613,8 +613,6 @@
 &weim {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>;
-	#address-cells = <2>;
-	#size-cells = <1>;
 	ranges = <0 0 0x08000000 0x08000000>;
 	status = "disabled"; /* pin conflict with SPI NOR */
 
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 81dd6cd..1f9076e 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -153,7 +153,7 @@
 		mux-ext-port = <4>;
 	};
 
-	backlight_lcd: backlight_lcd {
+	backlight_lcd: backlight-lcd {
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -162,7 +162,7 @@
 		status = "okay";
 	};
 
-	backlight_lvds: backlight_lvds {
+	backlight_lvds: backlight-lvds {
 		compatible = "pwm-backlight";
 		pwms = <&pwm4 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -197,7 +197,7 @@
 		};
 	};
 
-	lcd_panel {
+	panel-lcd {
 		compatible = "okaya,rs800480t-7x0gp";
 		backlight = <&backlight_lcd>;
 
@@ -208,7 +208,7 @@
 		};
 	};
 
-	panel {
+	panel-lvds0 {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds>;
 
@@ -378,7 +378,7 @@
 			>;
 		};
 
-		pinctrl_gpio_keys: gpio_keysgrp {
+		pinctrl_gpio_keys: gpio-keysgrp {
 			fsl,pins = <
 				/* Power Button */
 				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 8e9e0d9..55ef535 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -129,8 +129,8 @@
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
 		red {
-		        gpios = <&gpio1 2 0>;
-		        default-state = "on";
+			gpios = <&gpio1 2 0>;
+			default-state = "on";
 		};
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index ac9529f..2bf2e62 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -429,8 +429,8 @@
 	pinctrl_edt_ft5x06: edt-ft5x06grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0 /* Interrupt */
-			MX6QDL_PAD_EIM_A16__GPIO2_IO22  	0x1b0b0 /* Reset */
-			MX6QDL_PAD_EIM_A17__GPIO2_IO21  	0x1b0b0 /* Wake */
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x1b0b0 /* Reset */
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x1b0b0 /* Wake */
 		>;
 	};
 
@@ -481,21 +481,21 @@
 
 	pinctrl_gpmi_nand: gpminandgrp {
 		fsl,pins = <
-			MX6QDL_PAD_NANDF_CLE__NAND_CLE    	0x0b0b1
-			MX6QDL_PAD_NANDF_ALE__NAND_ALE    	0x0b0b1
-			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B  	0x0b0b1
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0x0b0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0x0b0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0x0b0b1
 			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0x0b000
-			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B  	0x0b0b1
-			MX6QDL_PAD_SD4_CMD__NAND_RE_B     	0x0b0b1
-			MX6QDL_PAD_SD4_CLK__NAND_WE_B     	0x0b0b1
-			MX6QDL_PAD_NANDF_D0__NAND_DATA00  	0x0b0b1
-			MX6QDL_PAD_NANDF_D1__NAND_DATA01  	0x0b0b1
-			MX6QDL_PAD_NANDF_D2__NAND_DATA02  	0x0b0b1
-			MX6QDL_PAD_NANDF_D3__NAND_DATA03  	0x0b0b1
-			MX6QDL_PAD_NANDF_D4__NAND_DATA04  	0x0b0b1
-			MX6QDL_PAD_NANDF_D5__NAND_DATA05  	0x0b0b1
-			MX6QDL_PAD_NANDF_D6__NAND_DATA06  	0x0b0b1
-			MX6QDL_PAD_NANDF_D7__NAND_DATA07  	0x0b0b1
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0x0b0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0x0b0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0x0b0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0x0b0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0x0b0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0x0b0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0x0b0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0x0b0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0x0b0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0x0b0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0x0b0b1
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi
index ef7fa62..a320891 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi
@@ -28,7 +28,7 @@
 				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x80000000	/* RGMII_nRST */
 				MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x80000000	/* BT_ON */
 				MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x80000000	/* BT_WAKE */
-				MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x80000000	/* BT_HOST_WAKE */				
+				MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x80000000	/* BT_HOST_WAKE */
 			>;
 		};
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index 2b9c2be..82dc5744 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -129,8 +129,8 @@
 
 		pinctrl_i2c1: i2c1grp {
 			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL 		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA 		0x4001b8b1
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
 			>;
 		};
 
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index b13b0b2..53e6e63 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -13,9 +13,10 @@
 #include <dt-bindings/clock/imx6qdl-clock.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-#include "skeleton.dtsi"
-
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	aliases {
 		ethernet0 = &fec;
 		can0 = &can1;
@@ -204,9 +205,9 @@
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-			                <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-			                <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-			                <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+					<0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clks IMX6QDL_CLK_PCIE_AXI>,
 				 <&clks IMX6QDL_CLK_LVDS1_GATE>,
 				 <&clks IMX6QDL_CLK_PCIE_REF_125M>;
@@ -1092,10 +1093,13 @@
 			};
 
 			weim: weim@021b8000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
 				compatible = "fsl,imx6q-weim";
 				reg = <0x021b8000 0x4000>;
 				interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6QDL_CLK_EIM_SLOW>;
+				fsl,weim-cs-gpr = <&gpr>;
 			};
 
 			ocotp: ocotp@021bc000 {
diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi
index caaa040..0d4977a 100644
--- a/arch/arm/boot/dts/imx6qp.dtsi
+++ b/arch/arm/boot/dts/imx6qp.dtsi
@@ -85,6 +85,13 @@
 		pcie: pcie@0x01000000 {
 			compatible = "fsl,imx6qp-pcie", "snps,dw-pcie";
 		};
+
+		aips-bus@02100000 {
+			mmdc0: mmdc@021b0000 { /* MMDC0 */
+				compatible = "fsl,imx6qp-mmdc", "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+			};
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 02378db..4fd6de2 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -8,11 +8,13 @@
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
-#include "skeleton.dtsi"
 #include "imx6sl-pinfunc.h"
 #include <dt-bindings/clock/imx6sl-clock.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	aliases {
 		ethernet0 = &fec;
 		gpio0 = &gpio1;
@@ -893,8 +895,11 @@
 			};
 
 			weim: weim@021b8000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
 				reg = <0x021b8000 0x4000>;
 				interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+				fsl,weim-cs-gpr = <&gpr>;
 			};
 
 			ocotp: ocotp@021bc000 {
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index 9d70cfd..da81552 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -192,10 +192,10 @@
 };
 
 &i2c4 {
-        clock-frequency = <100000>;
-        pinctrl-names = "default";
-        pinctrl-0 = <&pinctrl_i2c4>;
-        status = "okay";
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
 
 	codec: wm8962@1a {
 		compatible = "wlf,wm8962";
@@ -290,6 +290,14 @@
 	status = "okay";
 };
 
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <106>;
+};
+
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
new file mode 100644
index 0000000..0c1fc1a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
@@ -0,0 +1,69 @@
+/*
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6sx-udoo-neo.dtsi"
+
+/ {
+	model = "UDOO Neo Basic";
+	compatible = "udoo,neobasic", "fsl,imx6sx";
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&fec1 {
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
new file mode 100644
index 0000000..5d6c227
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
@@ -0,0 +1,54 @@
+/*
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6sx-udoo-neo.dtsi"
+
+/ {
+	model = "UDOO Neo Extended";
+	compatible = "udoo,neoextended", "fsl,imx6sx";
+
+	memory {
+		reg = <0x80000000 0x40000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
new file mode 100644
index 0000000..653ceb2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
@@ -0,0 +1,69 @@
+/*
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6sx-udoo-neo.dtsi"
+
+/ {
+	model = "UDOO Neo Full";
+	compatible = "udoo,neofull", "fsl,imx6sx";
+
+	memory {
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&fec1 {
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
new file mode 100644
index 0000000..2b65d26
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
@@ -0,0 +1,293 @@
+/*
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx6sx.dtsi"
+
+/ {
+	compatible = "fsl,imx6sx";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		red {
+			label = "udoo-neo:red:mmc";
+			gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+
+		orange {
+			label = "udoo-neo:orange:user";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+	};
+
+	reg_sdio_pwr: regulator-sdio-pwr {
+		compatible = "regulator-fixed";
+		gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "SDIO_PWR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	arm-supply = <&sw1a_reg>;
+	soc-supply = <&sw1c_reg>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pmic: pmic@08 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins =
+			<MX6SX_PAD_ENET1_CRS__GPIO2_IO_1	0xa0b1>,
+			<MX6SX_PAD_ENET1_MDC__ENET1_MDC		0xa0b1>,
+			<MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0xa0b1>,
+			<MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0xa0b1>,
+			<MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0xa0b1>,
+			<MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0xa0b1>,
+
+			<MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x3081>,
+			<MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9	0x3081>,
+			<MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x3081>,
+			<MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x3081>,
+			<MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081>,
+			<MX6SX_PAD_RGMII1_RXC__ENET1_RX_ER	0x3081>,
+
+			<MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M	0x91>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins =
+			<MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1>,
+			<MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins =
+			<MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1>,
+			<MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins =
+			<MX6SX_PAD_GPIO1_IO06__UART2_TX		0x1b0b1>,
+			<MX6SX_PAD_GPIO1_IO07__UART2_RX		0x1b0b1>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins =
+			<MX6SX_PAD_SD4_DATA4__UART5_RX		0x1b0b1>,
+			<MX6SX_PAD_SD4_DATA5__UART5_TX		0x1b0b1>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins =
+			<MX6SX_PAD_CSI_DATA00__UART6_RI_B	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA01__UART6_DSR_B	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA02__UART6_DTR_B	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA03__UART6_DCD_B	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA04__UART6_RX		0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA05__UART6_TX		0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA06__UART6_RTS_B	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA07__UART6_CTS_B	0x1b0b1>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins =
+			<MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059>,
+			<MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059>,
+			<MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059>,
+			<MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059>,
+			<MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059>,
+			<MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059>,
+			<MX6SX_PAD_SD1_DATA0__GPIO6_IO_2	0x17059>; /* CD */
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* Cortex-M4 serial */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "disabled";
+};
+
+/* Arduino serial */
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "disabled";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_sdio_pwr>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 1a473e8..076a30f 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -11,9 +11,11 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include "imx6sx-pinfunc.h"
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	aliases {
 		can0 = &flexcan1;
 		can1 = &flexcan2;
@@ -858,7 +860,7 @@
 				fsl,num-tx-queues=<3>;
 				fsl,num-rx-queues=<3>;
 				status = "disabled";
-                        };
+			};
 
 			mlb: mlb@0218c000 {
 				reg = <0x0218c000 0x4000>;
@@ -968,10 +970,13 @@
 			};
 
 			weim: weim@021b8000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
 				compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim";
 				reg = <0x021b8000 0x4000>;
 				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_EIM_SLOW>;
+				fsl,weim-cs-gpr = <&gpr>;
 			};
 
 			ocotp: ocotp@021bc000 {
@@ -1143,7 +1148,7 @@
 				lcdif1: lcdif@02220000 {
 					compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
 					reg = <0x02220000 0x4000>;
-					interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 5 IRQ_TYPE_EDGE_RISING>;
 					clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
 						 <&clks IMX6SX_CLK_LCDIF_APB>,
 						 <&clks IMX6SX_CLK_DISPLAY_AXI>;
@@ -1154,7 +1159,7 @@
 				lcdif2: lcdif@02224000 {
 					compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
 					reg = <0x02224000 0x4000>;
-					interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>;
 					clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>,
 						 <&clks IMX6SX_CLK_LCDIF_APB>,
 						 <&clks IMX6SX_CLK_DISPLAY_AXI>;
@@ -1181,7 +1186,7 @@
 				fsl,adck-max-frequency = <30000000>, <40000000>,
 							 <20000000>;
 				status = "disabled";
-                        };
+			};
 
 			adc2: adc@02284000 {
 				compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
@@ -1192,7 +1197,7 @@
 				fsl,adck-max-frequency = <30000000>, <40000000>,
 							 <20000000>;
 				status = "disabled";
-                        };
+			};
 
 			wdog3: wdog@02288000 {
 				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
index e281d50..00f98e5 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
@@ -225,7 +225,7 @@
 };
 
 &usbotg1 {
-	dr_mode = "peripheral";
+	dr_mode = "otg";
 	status = "okay";
 };
 
@@ -235,6 +235,14 @@
 	status = "okay";
 };
 
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <106>;
+};
+
 &usdhc1 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1>;
diff --git a/arch/arm/boot/dts/imx6ul-liteboard.dts b/arch/arm/boot/dts/imx6ul-liteboard.dts
new file mode 100644
index 0000000..6e04cb9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-liteboard.dts
@@ -0,0 +1,147 @@
+/*
+ * Copyright 2016 Grinn
+ *
+ * Author: Marcin Niestroj <m.niestroj@grinn-global.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6ul-litesom.dtsi"
+
+/ {
+	model = "Grinn i.MX6UL liteBoard";
+	compatible = "grinn,imx6ul-liteboard", "grinn,imx6ul-litesom",
+		     "fsl,imx6ul";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg1_vbus>;
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 8 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10071
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usb_otg1_vbus: usb-otg1-vbus {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x79
+		>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ul-litesom.dtsi b/arch/arm/boot/dts/imx6ul-litesom.dtsi
new file mode 100644
index 0000000..461292d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-litesom.dtsi
@@ -0,0 +1,82 @@
+/*
+ * Copyright 2016 Grinn
+ *
+ * Author: Marcin Niestroj <m.niestroj@grinn-global.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx6ul.dtsi"
+
+/ {
+	model = "Grinn i.MX6UL liteSOM";
+	compatible = "grinn,imx6ul-litesom", "fsl,imx6ul";
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&iomuxc {
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK	    0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD	    0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059
+			MX6UL_PAD_NAND_ALE__USDHC2_RESET_B  0x17059
+		>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	bus-width = <8>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index c5c05fd..39845a7 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -11,9 +11,11 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include "imx6ul-pinfunc.h"
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	aliases {
 		ethernet0 = &fec1;
 		ethernet1 = &fec2;
diff --git a/arch/arm/boot/dts/imx6ull-14x14-evk.dts b/arch/arm/boot/dts/imx6ull-14x14-evk.dts
new file mode 100644
index 0000000..db5bc07
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-14x14-evk.dts
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx6ul-14x14-evk.dts"
+
+/ {
+	model = "Freescale i.MX6 UlltraLite 14x14 EVK Board";
+	compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6UL_CLK_PLL3_PFD2>;
+	assigned-clock-rates = <320000000>;
+};
diff --git a/arch/arm/boot/dts/imx6ull-pinfunc.h b/arch/arm/boot/dts/imx6ull-pinfunc.h
new file mode 100644
index 0000000..1182023
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-pinfunc.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DTS_IMX6ULL_PINFUNC_H
+#define __DTS_IMX6ULL_PINFUNC_H
+
+#include "imx6ul-pinfunc.h"
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6ULL_PAD_ENET2_RX_DATA0__EPDC_SDDO08                    0x00E4 0x0370 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_RX_DATA1__EPDC_SDDO09                    0x00E8 0x0374 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_RX_EN__EPDC_SDDO10                       0x00EC 0x0378 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_TX_DATA0__EPDC_SDDO11                    0x00F0 0x037C 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_TX_DATA1__EPDC_SDDO12                    0x00F4 0x0380 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_TX_EN__EPDC_SDDO13                       0x00F8 0x0384 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_TX_CLK__EPDC_SDDO14                      0x00FC 0x0388 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_RX_ER__EPDC_SDDO15                       0x0100 0x038C 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_CLK__EPDC_SDCLK                            0x0104 0x0390 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_ENABLE__EPDC_SDLE                          0x0108 0x0394 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_HSYNC__EPDC_SDOE                           0x010C 0x0398 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_VSYNC__EPDC_SDCE0                          0x0110 0x039C 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_RESET__EPDC_GDOE                           0x0114 0x03A0 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA00__EPDC_SDDO00                        0x0118 0x03A4 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA01__EPDC_SDDO01                        0x011C 0x03A8 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA02__EPDC_SDDO02                        0x0120 0x03AC 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA03__EPDC_SDDO03                        0x0124 0x03B0 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA04__EPDC_SDDO04                        0x0128 0x03B4 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA05__EPDC_SDDO05                        0x012C 0x03B8 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA06__EPDC_SDDO06                        0x0130 0x03BC 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA07__EPDC_SDDO07                        0x0134 0x03C0 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA14__EPDC_SDSHR                         0x0150 0x03DC 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA15__EPDC_GDRL                          0x0154 0x03E0 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA16__EPDC_GDCLK                         0x0158 0x03E4 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA17__EPDC_GDSP                          0x015C 0x03E8 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA21__EPDC_SDCE1                         0x016C 0x03F8 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_MCLK__ESAI_TX3_RX2                         0x01D4 0x0460 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_PIXCLK__ESAI_TX2_RX3                       0x01D8 0x0464 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_VSYNC__ESAI_TX4_RX1                        0x01DC 0x0468 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_HSYNC__ESAI_TX1                            0x01E0 0x046C 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA00__ESAI_TX_HF_CLK                     0x01E4 0x0470 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA01__ESAI_RX_HF_CLK                     0x01E8 0x0474 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA02__ESAI_RX_FS                         0x01EC 0x0478 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA03__ESAI_RX_CLK                        0x01F0 0x047C 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS                         0x01F4 0x0480 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK                        0x01F8 0x0484 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0                       0x01FC 0x0488 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA07__ESAI_T0                            0x0200 0x048C 0x0000 0x9 0x0
+
+#endif /* __DTS_IMX6ULL_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
new file mode 100644
index 0000000..dee8ab8
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull.dtsi
@@ -0,0 +1,43 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx6ul.dtsi"
+#include "imx6ull-pinfunc.h"
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 2b6cb05..8ff2cbdd 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -46,9 +46,11 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include "imx7d-pinfunc.h"
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	aliases {
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts
index 6f16d09..e8b249f9 100644
--- a/arch/arm/boot/dts/integratorap.dts
+++ b/arch/arm/boot/dts/integratorap.dts
@@ -10,6 +10,41 @@
 	compatible = "arm,integrator-ap";
 	dma-ranges = <0x80000000 0x0 0x80000000>;
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			/*
+			 * Since the board has pluggable CPU modules, we
+			 * cannot define a proper compatible here. Let the
+			 * boot loader fill in the apropriate compatible
+			 * string if necessary.
+			 */
+			/* compatible = "arm,arm926ej-s"; */
+			reg = <0>;
+			/*
+			 * The documentation in ARM DUI 0138E page 3-12 states
+			 * that the maximum frequency for this clock is 200 MHz
+			 * but painful trial-and-error has proved to me that it
+			 * is actually just hanging the system above 71 MHz.
+			 * Sad but true.
+			 */
+					 /* kHz     uV   */
+			operating-points = <71000  0
+					    66000  0
+					    60000  0
+					    48000  0
+					    36000  0
+					    24000  0
+					    12000  0>;
+			clocks = <&cmosc>;
+			clock-names = "cpu";
+			clock-latency = <1000000>; /* 1 ms */
+		};
+	};
+
 	aliases {
 		arm,timer-primary = &timer2;
 		arm,timer-secondary = &timer1;
diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts
index 1b5e4b0..97f38b5 100644
--- a/arch/arm/boot/dts/integratorcp.dts
+++ b/arch/arm/boot/dts/integratorcp.dts
@@ -13,6 +13,32 @@
 		bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk";
 	};
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			/*
+			 * Since the board has pluggable CPU modules, we
+			 * cannot define a proper compatible here. Let the
+			 * boot loader fill in the apropriate compatible
+			 * string if necessary.
+			 */
+			/* compatible = "arm,arm920t"; */
+			reg = <0>;
+			/*
+			 * TBD comment.
+			 */
+					 /* kHz     uV   */
+			operating-points = <50000  0
+					    48000  0>;
+			clocks = <&cmcore>;
+			clock-names = "cpu";
+			clock-latency = <1000000>; /* 1 ms */
+		};
+	};
+
 	/*
 	 * The Integrator/CP overall clocking architecture can be found in
 	 * ARM DUI 0184B page 7-28 "Integrator/CP922T system clocks" which
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 2919c519..63c7cf0 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -72,6 +72,7 @@
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
+		#pinctrl-cells = <1>;
 		compatible = "ti,keystone","simple-bus";
 		ranges = <0x0 0x0 0x0 0xc0000000>;
 		dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi
index 2ee3d0a..0c5e74e 100644
--- a/arch/arm/boot/dts/keystone-k2l.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l.dtsi
@@ -59,6 +59,7 @@
 			reg = <0x02620690 0xc>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			#pinctrl-cells = <2>;
 			pinctrl-single,bit-per-mux;
 			pinctrl-single,register-width = <32>;
 			pinctrl-single,function-mask = <0x1>;
diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts
index 1e9a721..330aada 100644
--- a/arch/arm/boot/dts/kirkwood-topkick.dts
+++ b/arch/arm/boot/dts/kirkwood-topkick.dts
@@ -4,7 +4,7 @@
 #include "kirkwood-6282.dtsi"
 
 / {
-	model = "Univeral Scientific Industrial Co. Topkick-1281P2";
+	model = "Universal Scientific Industrial Co. Topkick-1281P2";
 	compatible = "usi,topkick-1281P2", "usi,topkick", "marvell,kirkwood-88f6282", "marvell,kirkwood";
 
 	memory {
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index b5841fa..d81fe43 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -479,6 +479,8 @@
 				compatible = "nxp,lpc3220-pwm";
 				reg = <0x4005C000 0x4>;
 				clocks = <&clk LPC32XX_CLK_PWM1>;
+				assigned-clocks = <&clk LPC32XX_CLK_PWM1>;
+				assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
 				status = "disabled";
 			};
 
@@ -486,6 +488,8 @@
 				compatible = "nxp,lpc3220-pwm";
 				reg = <0x4005C004 0x4>;
 				clocks = <&clk LPC32XX_CLK_PWM2>;
+				assigned-clocks = <&clk LPC32XX_CLK_PWM2>;
+				assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 368e219..282d854 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -47,6 +47,7 @@
 
 #include "skeleton64.dtsi"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "fsl,ls1021a";
@@ -70,14 +71,15 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@f00 {
+		cpu0: cpu@f00 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <0xf00>;
 			clocks = <&cluster1_clk>;
+			#cooling-cells = <2>;
 		};
 
-		cpu@f01 {
+		cpu1: cpu@f01 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <0xf01>;
@@ -251,6 +253,84 @@
 			};
 		};
 
+		tmu: tmu@1f00000 {
+			compatible = "fsl,qoriq-tmu";
+			reg = <0x0 0x1f00000 0x0 0x10000>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x30061>;
+			fsl,tmu-calibration = <0x00000000 0x0000000f
+					       0x00000001 0x00000017
+					       0x00000002 0x0000001e
+					       0x00000003 0x00000026
+					       0x00000004 0x0000002e
+					       0x00000005 0x00000035
+					       0x00000006 0x0000003d
+					       0x00000007 0x00000044
+					       0x00000008 0x0000004c
+					       0x00000009 0x00000053
+					       0x0000000a 0x0000005b
+					       0x0000000b 0x00000064
+
+					       0x00010000 0x00000011
+					       0x00010001 0x0000001c
+					       0x00010002 0x00000024
+					       0x00010003 0x0000002b
+					       0x00010004 0x00000034
+					       0x00010005 0x00000039
+					       0x00010006 0x00000042
+					       0x00010007 0x0000004c
+					       0x00010008 0x00000051
+					       0x00010009 0x0000005a
+					       0x0001000a 0x00000063
+
+					       0x00020000 0x00000013
+					       0x00020001 0x00000019
+					       0x00020002 0x00000024
+					       0x00020003 0x0000002c
+					       0x00020004 0x00000035
+					       0x00020005 0x0000003d
+					       0x00020006 0x00000046
+					       0x00020007 0x00000050
+					       0x00020008 0x00000059
+
+					       0x00030000 0x00000002
+					       0x00030001 0x0000000d
+					       0x00030002 0x00000019
+					       0x00030003 0x00000024>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		thermal-zones {
+			cpu_thermal: cpu-thermal {
+				polling-delay-passive = <1000>;
+				polling-delay = <5000>;
+
+				thermal-sensors = <&tmu 0>;
+
+				trips {
+					cpu_alert: cpu-alert {
+						temperature = <85000>;
+						hysteresis = <2000>;
+						type = "passive";
+					};
+					cpu_crit: cpu-crit {
+						temperature = <95000>;
+						hysteresis = <2000>;
+						type = "critical";
+					};
+				};
+
+				cooling-maps {
+					map0 {
+						trip = <&cpu_alert>;
+						cooling-device =
+							<&cpu0 THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+					};
+				};
+			};
+		};
+
 		dspi0: dspi@2100000 {
 			compatible = "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/mps2-an385.dts b/arch/arm/boot/dts/mps2-an385.dts
index 31c374d..aebbebf 100644
--- a/arch/arm/boot/dts/mps2-an385.dts
+++ b/arch/arm/boot/dts/mps2-an385.dts
@@ -59,7 +59,7 @@
 		stdout-path = "serial0:9600n8";
 	};
 
-	memory {
+	memory@21000000 {
 		device_type = "memory";
 		reg = <0x21000000 0x1000000>;
 	};
diff --git a/arch/arm/boot/dts/mps2-an399.dts b/arch/arm/boot/dts/mps2-an399.dts
index 5e7e5ca..349abf7 100644
--- a/arch/arm/boot/dts/mps2-an399.dts
+++ b/arch/arm/boot/dts/mps2-an399.dts
@@ -59,7 +59,7 @@
 		stdout-path = "serial0:9600n8";
 	};
 
-	memory {
+	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x1000000>;
 	};
diff --git a/arch/arm/boot/dts/mps2.dtsi b/arch/arm/boot/dts/mps2.dtsi
index efb8a03..2346739 100644
--- a/arch/arm/boot/dts/mps2.dtsi
+++ b/arch/arm/boot/dts/mps2.dtsi
@@ -42,10 +42,12 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton.dtsi"
 #include "armv7-m.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	oscclk0: clk-osc0 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 18596a2..7eab6f4 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -12,8 +12,10 @@
  * GNU General Public License for more details.
  */
 
+#include <dt-bindings/clock/mt2701-clk.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/mt2701-resets.h>
 #include "skeleton64.dtsi"
 #include "mt2701-pinfunc.h"
 
@@ -71,10 +73,18 @@
 		#clock-cells = <0>;
 	};
 
-	uart_clk: dummy26m {
+	clk26m: oscillator@0 {
 		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
 		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	rtc32k: oscillator@1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32000>;
+		clock-output-names = "rtc32k";
 	};
 
 	timer {
@@ -104,6 +114,26 @@
 		reg = <0 0x10005000 0 0x1000>;
 	};
 
+	topckgen: syscon@10000000 {
+		compatible = "mediatek,mt2701-topckgen", "syscon";
+		reg = <0 0x10000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	infracfg: syscon@10001000 {
+		compatible = "mediatek,mt2701-infracfg", "syscon";
+		reg = <0 0x10001000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pericfg: syscon@10003000 {
+		compatible = "mediatek,mt2701-pericfg", "syscon";
+		reg = <0 0x10003000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
 	watchdog: watchdog@10007000 {
 		compatible = "mediatek,mt2701-wdt",
 			     "mediatek,mt6589-wdt";
@@ -128,6 +158,12 @@
 		reg = <0 0x10200100 0 0x1c>;
 	};
 
+	apmixedsys: syscon@10209000 {
+		compatible = "mediatek,mt2701-apmixedsys", "syscon";
+		reg = <0 0x10209000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
 	gic: interrupt-controller@10211000 {
 		compatible = "arm,cortex-a7-gic";
 		interrupt-controller;
@@ -144,7 +180,8 @@
 			     "mediatek,mt6577-uart";
 		reg = <0 0x11002000 0 0x400>;
 		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
+		clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
+		clock-names = "baud", "bus";
 		status = "disabled";
 	};
 
@@ -153,7 +190,8 @@
 			     "mediatek,mt6577-uart";
 		reg = <0 0x11003000 0 0x400>;
 		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
+		clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
+		clock-names = "baud", "bus";
 		status = "disabled";
 	};
 
@@ -162,7 +200,8 @@
 			     "mediatek,mt6577-uart";
 		reg = <0 0x11004000 0 0x400>;
 		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
+		clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
+		clock-names = "baud", "bus";
 		status = "disabled";
 	};
 
@@ -171,7 +210,8 @@
 			     "mediatek,mt6577-uart";
 		reg = <0 0x11005000 0 0x400>;
 		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
+		clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
+		clock-names = "baud", "bus";
 		status = "disabled";
 	};
 };
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
index fb712b9..aba542d 100644
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -38,6 +38,7 @@
 				reg = <0x0 0x1000>;
 				#address-cells = <1>;
 				#size-cells = <1>;
+				#pinctrl-cells = <1>;
 				ranges = <0 0x0 0x1000>;
 
 				omap2420_pmx: pinmux@30 {
@@ -46,6 +47,7 @@
 					reg = <0x30 0x0113>;
 					#address-cells = <1>;
 					#size-cells = <0>;
+					#pinctrl-cells = <1>;
 					pinctrl-single,register-width = <8>;
 					pinctrl-single,function-mask = <0x3f>;
 				};
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index 455aaea..84635ee 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -38,6 +38,7 @@
 				reg = <0x2000 0x1000>;
 				#address-cells = <1>;
 				#size-cells = <1>;
+				#pinctrl-cells = <1>;
 				ranges = <0 0x2000 0x1000>;
 
 				omap2430_pmx: pinmux@30 {
@@ -46,6 +47,7 @@
 					reg = <0x30 0x0154>;
 					#address-cells = <1>;
 					#size-cells = <0>;
+					#pinctrl-cells = <1>;
 					pinctrl-single,register-width = <8>;
 					pinctrl-single,function-mask = <0x3f>;
 				};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 353d818..ecf5eb5 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -106,6 +106,7 @@
 					reg = <0x30 0x238>;
 					#address-cells = <1>;
 					#size-cells = <0>;
+					#pinctrl-cells = <1>;
 					#interrupt-cells = <1>;
 					interrupt-controller;
 					pinctrl-single,register-width = <16>;
@@ -145,6 +146,7 @@
 					reg = <0xa00 0x5c>;
 					#address-cells = <1>;
 					#size-cells = <0>;
+					#pinctrl-cells = <1>;
 					#interrupt-cells = <1>;
 					interrupt-controller;
 					pinctrl-single,register-width = <16>;
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
index e41c52d..834fdf1 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -34,6 +34,7 @@
 			reg = <0x480025d8 0x24>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			#pinctrl-cells = <1>;
 			#interrupt-cells = <1>;
 			interrupt-controller;
 			pinctrl-single,register-width = <16>;
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 718fa88..d1a3e56 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -66,6 +66,7 @@
 			reg = <0x480025a0 0x5c>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			#pinctrl-cells = <1>;
 			#interrupt-cells = <1>;
 			interrupt-controller;
 			pinctrl-single,register-width = <16>;
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
new file mode 100644
index 0000000..f3ccb4c
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -0,0 +1,188 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap443x.dtsi"
+
+/ {
+	model = "Motorola Droid 4 XT894";
+	compatible = "motorola,droid4", "ti,omap4430", "ti,omap4";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	/*
+	 * We seem to have only 1021 MB accessible, 1021 - 1022 is locked,
+	 * then 1023 - 1024 seems to contain mbm. For SRAM, see the notes
+	 * below about SRAM and L3_ICLK2 being unused by default,
+	 */
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x3fd00000>;	/* 1021 MB */
+	};
+
+	/* CPCAP really supports 1650000 to 3400000 range */
+	vmmc: regulator-mmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-always-on;
+	};
+
+	/* CPCAP really supports 3000000 to 3100000 range */
+	vemmc: regulator-emmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vemmc";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-always-on;
+	};
+
+	/* CPCAP really supports 1650000 to 1950000 range */
+	wl12xx_vmmc: regulator-wl12xx {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1650000>;
+		regulator-max-microvolt = <1650000>;
+		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;	/* gpio94 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+/* L3_2 interconnect is unused, SRAM, GPMC and L3_ICLK2 disabled */
+&gpmc {
+	status = "disabled";
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc>;
+	bus-width = <4>;
+	cd-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;	/* gpio106 */
+};
+
+&mmc2 {
+	vmmc-supply = <&vemmc>;
+	bus-width = <8>;
+	non-removable;
+};
+
+&mmc3 {
+	vmmc-supply = <&wl12xx_vmmc>;
+	interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core 0xde>;
+
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1283";
+		reg = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; /* gpio100 */
+		ref-clock-frequency = <26000000>;
+		tcxo-clock-frequency = <26000000>;
+	};
+};
+
+/* L3_2 interconnect is unused, SRAM, GPMC and L3_ICLK2 disabled */
+&ocmcram {
+	status = "disabled";
+};
+
+&omap4_pmx_core {
+	usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins {
+		/* gpio_60 */
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)
+		>;
+	};
+
+	usb_ulpi_pins: pinmux_usb_ulpi_pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x196, MUX_MODE7)
+		OMAP4_IOPAD(0x198, MUX_MODE7)
+		OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+
+	/* usb0_otg_dp and usb0_otg_dm */
+	usb_utmi_pins: pinmux_usb_utmi_pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0)
+		OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0)
+		OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
+		>;
+	};
+
+	/* uart3_tx_irtx and uart3_rx_irrx */
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x196, MUX_MODE7)
+		OMAP4_IOPAD(0x198, MUX_MODE7)
+		OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1ba, MUX_MODE2)
+		OMAP4_IOPAD(0x1bc, PIN_INPUT | MUX_MODE2)
+		OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
+		>;
+	};
+};
+
+&omap4_pmx_wkup {
+	usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
+		/* gpio_wk0 */
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
+		>;
+	};
+};
+
+&uart3 {
+	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core 0x17c>;
+};
+
+/* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */
+&usb_otg_hs {
+	interface-type = <1>;
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 0ced079..8087456 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -184,6 +184,7 @@
 					reg = <0x40 0x0196>;
 					#address-cells = <1>;
 					#size-cells = <0>;
+					#pinctrl-cells = <1>;
 					#interrupt-cells = <1>;
 					interrupt-controller;
 					pinctrl-single,register-width = <16>;
@@ -256,6 +257,7 @@
 					reg = <0x1e040 0x0038>;
 					#address-cells = <1>;
 					#size-cells = <0>;
+					#pinctrl-cells = <1>;
 					#interrupt-cells = <1>;
 					interrupt-controller;
 					pinctrl-single,register-width = <16>;
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 53d31a8..a8c7261 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -27,12 +27,98 @@
 			default-state = "off";
 		};
 	};
+
+	evm_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&evm_keys_pins>;
+
+		#address-cells = <7>;
+		#size-cells = <0>;
+
+		btn1 {
+			label = "BTN1";
+			linux,code = <169>;
+			gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;	/* gpio3_83 */
+			wakeup-source;
+			autorepeat;
+			debounce_interval = <50>;
+		};
+	};
+
+	evm_leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "omap5:red:led";
+			gpios = <&gpio9 17 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led2 {
+			label = "omap5:green:led";
+			gpios = <&gpio9 18 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "omap5:blue:led";
+			gpios = <&gpio9 19 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc2";
+			default-state = "off";
+		};
+
+		led4 {
+			label = "omap5:green:led1";
+			gpios = <&gpio9 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led5 {
+			label = "omap5:green:led2";
+			gpios = <&gpio9 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+			default-state = "off";
+		};
+
+		led6 {
+			label = "omap5:green:led3";
+			gpios = <&gpio9 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led7 {
+			label = "omap5:green:led4";
+			gpios = <&gpio9 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+			default-state = "off";
+		};
+
+		led8 {
+			label = "omap5:green:led5";
+			gpios = <&gpio9 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
 };
 
 &hdmi {
 	vdda-supply = <&ldo4_reg>;
 };
 
+&i2c1 {
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+};
+
 &i2c5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c5_pins>;
@@ -48,6 +134,12 @@
 };
 
 &omap5_pmx_core {
+	evm_keys_pins: pinmux_evm_keys_gpio_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0b6, PIN_INPUT | MUX_MODE6)	/* gpio3_83 */
+		>;
+	};
+
 	i2c5_pins: pinmux_i2c5_pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x1c6, PIN_INPUT | MUX_MODE0)		/* i2c5_scl */
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 2526211..968c67a 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -171,6 +171,7 @@
 					reg = <0x40 0x01b6>;
 					#address-cells = <1>;
 					#size-cells = <0>;
+					#pinctrl-cells = <1>;
 					#interrupt-cells = <1>;
 					interrupt-controller;
 					pinctrl-single,register-width = <16>;
@@ -270,6 +271,7 @@
 				reg = <0xc840 0x003c>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				#pinctrl-cells = <1>;
 				#interrupt-cells = <1>;
 				interrupt-controller;
 				pinctrl-single,register-width = <16>;
diff --git a/arch/arm/boot/dts/orion5x-lschl.dts b/arch/arm/boot/dts/orion5x-lschl.dts
new file mode 100644
index 0000000..9474092
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-lschl.dts
@@ -0,0 +1,171 @@
+/*
+ * Device Tree file for Buffalo Linkstation LS-CHLv3
+ *
+ * Copyright (C) 2016 Ash Hughes <ashley.hughes@blueyonder.co.uk>
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "orion5x-linkstation.dtsi"
+#include "mvebu-linkstation-gpio-simple.dtsi"
+#include "mvebu-linkstation-fan.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Buffalo Linkstation Live v3 (LS-CHL)";
+	compatible = "buffalo,lschl", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	gpio_keys {
+		func {
+			label = "Function Button";
+			linux,code = <KEY_OPTION>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		power-on-switch {
+			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+		};
+
+		power-auto-switch {
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds {
+		pinctrl-0 = <&pmx_led_power &pmx_led_alarm &pmx_led_info &pmx_led_func>;
+		blue-power-led {
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		red-alarm-led {
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		amber-info-led {
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+		};
+
+		func {
+			label = "lschl:func:blue:top";
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_fan {
+		gpios = <&gpio0 14 GPIO_ACTIVE_LOW
+			 &gpio0 16 GPIO_ACTIVE_LOW>;
+
+		alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pinctrl {
+	pmx_led_power: pmx-leds {
+		marvell,pins = "mpp0";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_hdd: pmx-power-hdd {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_alarm: pmx-leds {
+		marvell,pins = "mpp2";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_info: pmx-leds {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_lock: pmx-fan-lock {
+		marvell,pins = "mpp6";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_switch: pmx-power-switch {
+		marvell,pins = "mpp8", "mpp10", "mpp15";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_usb: pmx-power-usb {
+		marvell,pins = "mpp9";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_high: pmx-fan-high {
+		marvell,pins = "mpp14";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_low: pmx-fan-low {
+		marvell,pins = "mpp16";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_func: pmx-leds {
+		marvell,pins = "mpp17";
+		marvell,function = "gpio";
+	};
+
+	pmx_sw_init: pmx-sw-init {
+		marvell,pins = "mpp7";
+		marvell,function = "gpio";
+	};
+};
+
+&hdd_power {
+	gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+};
+
+&usb_power {
+	gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+};
+
diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi
new file mode 100644
index 0000000..e40f282
--- /dev/null
+++ b/arch/arm/boot/dts/ox820.dtsi
@@ -0,0 +1,296 @@
+/*
+ * ox820.dtsi - Device tree file for Oxford Semiconductor OX820 SoC
+ *
+ * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/include/ "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "oxsemi,ox820";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "oxsemi,ox820-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			clocks = <&armclk>;
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			clocks = <&armclk>;
+			reg = <1>;
+		};
+	};
+
+	memory {
+		/* Max 512MB @ 0x60000000 */
+		reg = <0x60000000 0x20000000>;
+	};
+
+	clocks {
+		osc: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+
+		gmacclk: gmacclk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+
+		sysclk: sysclk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <4>;
+			clock-mult = <1>;
+			clocks = <&osc>;
+		};
+
+		plla: plla {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <850000000>;
+		};
+
+		armclk: armclk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clocks = <&plla>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+		interrupt-parent = <&gic>;
+
+		nandc: nand-controller@41000000 {
+			compatible = "oxsemi,ox820-nand";
+			reg = <0x41000000 0x100000>;
+			clocks = <&stdclk 11>;
+			resets = <&reset 15>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		etha: ethernet@40400000 {
+			compatible = "oxsemi,ox820-dwmac", "snps,dwmac";
+			reg = <0x40400000 0x2000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_wake_irq";
+			mac-address = [000000000000]; /* Filled in by U-Boot */
+			phy-mode = "rgmii";
+
+			clocks = <&stdclk 9>, <&gmacclk>;
+			clock-names = "gmac", "stmmaceth";
+			resets = <&reset 6>;
+
+			/* Regmap for sys registers */
+			oxsemi,sys-ctrl = <&sys>;
+
+			status = "disabled";
+		};
+
+		apb-bridge@44000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0 0x44000000 0x1000000>;
+
+			pinctrl: pinctrl {
+				compatible = "oxsemi,ox820-pinctrl";
+
+				/* Regmap for sys registers */
+				oxsemi,sys-ctrl = <&sys>;
+
+				pinctrl_uart0: uart0 {
+					uart0 {
+						pins = "gpio30", "gpio31";
+						function = "fct5";
+					};
+				};
+
+				pinctrl_uart0_modem: uart0_modem {
+					uart0_modem_a {
+						pins = "gpio24", "gpio24", "gpio26", "gpio27";
+						function = "fct4";
+					};
+					uart0_modem_b {
+						pins = "gpio28", "gpio29";
+						function = "fct5";
+					};
+				};
+
+				pinctrl_uart1: uart1 {
+					uart1 {
+						pins = "gpio7", "gpio8";
+						function = "fct4";
+					};
+				};
+
+				pinctrl_uart1_modem: uart1_modem {
+					uart1_modem {
+						pins = "gpio5", "gpio6", "gpio40", "gpio41", "gpio42", "gpio43";
+						function = "fct4";
+					};
+				};
+
+				pinctrl_etha_mdio: etha_mdio {
+					etha_mdio {
+						pins = "gpio3", "gpio4";
+						function = "fct1";
+					};
+				};
+
+				pinctrl_nand: nand {
+					nand {
+						pins = "gpio12", "gpio13", "gpio14", "gpio15",
+						     "gpio16", "gpio17", "gpio18", "gpio19",
+						     "gpio20", "gpio21", "gpio22", "gpio23",
+						     "gpio24";
+						function = "fct1";
+					};
+				};
+			};
+
+			gpio0: gpio@000000 {
+				compatible = "oxsemi,ox820-gpio";
+				reg = <0x000000 0x100000>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <32>;
+				oxsemi,gpio-bank = <0>;
+				gpio-ranges = <&pinctrl 0 0 32>;
+			};
+
+			gpio1: gpio@100000 {
+				compatible = "oxsemi,ox820-gpio";
+				reg = <0x100000 0x100000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <18>;
+				oxsemi,gpio-bank = <1>;
+				gpio-ranges = <&pinctrl 0 32 18>;
+			};
+
+			uart0: serial@200000 {
+			       compatible = "ns16550a";
+			       reg = <0x200000 0x100000>;
+			       interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			       reg-shift = <0>;
+			       fifo-size = <16>;
+			       reg-io-width = <1>;
+			       current-speed = <115200>;
+			       no-loopback-test;
+			       status = "disabled";
+			       clocks = <&sysclk>;
+			       resets = <&reset 17>;
+			};
+
+			uart1: serial@300000 {
+			       compatible = "ns16550a";
+			       reg = <0x200000 0x100000>;
+			       interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			       reg-shift = <0>;
+			       fifo-size = <16>;
+			       reg-io-width = <1>;
+			       current-speed = <115200>;
+			       no-loopback-test;
+			       status = "disabled";
+			       clocks = <&sysclk>;
+			       resets = <&reset 18>;
+			};
+
+			rps@400000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "simple-bus";
+				ranges = <0 0x400000 0x100000>;
+
+				intc: interrupt-controller@0 {
+					compatible = "oxsemi,ox820-rps-irq", "oxsemi,ox810se-rps-irq";
+					interrupt-controller;
+					reg = <0 0x200>;
+					interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+					#interrupt-cells = <1>;
+					valid-mask = <0xFFFFFFFF>;
+					clear-mask = <0>;
+				};
+
+				timer0: timer@200 {
+					compatible = "oxsemi,ox820-rps-timer";
+					reg = <0x200 0x40>;
+					clocks = <&sysclk>;
+					interrupt-parent = <&intc>;
+					interrupts = <4>;
+				};
+			};
+
+			sys: sys-ctrl@e00000 {
+				compatible = "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd";
+				reg = <0xe00000 0x200000>;
+
+				reset: reset-controller {
+					compatible = "oxsemi,ox820-reset", "oxsemi,ox810se-reset";
+					#reset-cells = <1>;
+				};
+
+				stdclk: stdclk {
+					compatible = "oxsemi,ox820-stdclk", "oxsemi,ox810se-stdclk";
+					#clock-cells = <1>;
+				};
+			};
+		};
+
+		apb-bridge@47000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0 0x47000000 0x1000000>;
+
+			scu: scu@0 {
+				compatible = "arm,arm11mp-scu";
+				reg = <0x0 0x100>;
+			};
+
+			local-timer@600 {
+				compatible = "arm,arm11mp-twd-timer";
+				reg = <0x600 0x20>;
+				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3)|IRQ_TYPE_LEVEL_HIGH)>;
+				clocks = <&armclk>;
+			};
+
+			gic: gic@1000 {
+				compatible = "arm,arm11mp-gic";
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				reg = <0x1000 0x1000>,
+				      <0x100 0x500>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/pxa25x.dtsi b/arch/arm/boot/dts/pxa25x.dtsi
new file mode 100644
index 0000000..f9f4726
--- /dev/null
+++ b/arch/arm/boot/dts/pxa25x.dtsi
@@ -0,0 +1,117 @@
+/*
+ * Copyright (C) 2016 Robert Jarzmik <robert.jarzmik@free.fr>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include "pxa2xx.dtsi"
+#include "dt-bindings/clock/pxa-clock.h"
+
+/ {
+	model = "Marvell PXA25x family SoC";
+	compatible = "marvell,pxa250";
+
+	clocks {
+	       /*
+		* The muxing of external clocks/internal dividers for osc* clock
+		* sources has been hidden under the carpet by now.
+		*/
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		clks: pxa2xx_clks@41300004 {
+			compatible = "marvell,pxa250-core-clocks";
+			#clock-cells = <1>;
+			status = "okay";
+		};
+
+		/* timer oscillator */
+		clktimer: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency  = <3686400>;
+			clock-output-names = "ostimer";
+		};
+	};
+
+	pxabus {
+		pdma: dma-controller@40000000 {
+			compatible = "marvell,pdma-1.0";
+			reg = <0x40000000 0x10000>;
+			interrupts = <25>;
+			#dma-channels = <16>;
+			#dma-cells = <2>;
+			#dma-requests = <40>;
+			status = "okay";
+		};
+
+		pxairq: interrupt-controller@40d00000 {
+			marvell,intc-priority;
+			marvell,intc-nr-irqs = <32>;
+		};
+
+		pinctrl: pinctrl@40e00000 {
+			reg = <0x40e00054 0x20 0x40e0000c 0xc 0x40e0010c 4
+			       0x40f00020 0x10>;
+			compatible = "marvell,pxa25x-pinctrl";
+		};
+
+		gpio: gpio@40e00000 {
+			compatible = "intel,pxa25x-gpio";
+			gpio-ranges = <&pinctrl 0 0 84>;
+			clocks = <&clks CLK_NONE>;
+		};
+
+		pwm0: pwm@40b00000 {
+			compatible = "marvell,pxa250-pwm";
+			reg = <0x40b00000 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM0>;
+		};
+
+		pwm1: pwm@40b00010 {
+			compatible = "marvell,pxa250-pwm";
+			reg = <0x40b00010 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM1>;
+		};
+	};
+
+	timer@40a00000 {
+		compatible = "marvell,pxa-timer";
+		reg = <0x40a00000 0x20>;
+		interrupts = <26>;
+		clocks = <&clktimer>;
+		status = "okay";
+	};
+
+	pxa250_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+
+		opp@99532800 {
+			opp-hz = /bits/ 64 <99532800>;
+			opp-microvolt = <1000000 950000 1650000>;
+			clock-latency-ns = <20>;
+		};
+		opp@199065600 {
+			opp-hz = /bits/ 64 <199065600>;
+			opp-microvolt = <1000000 950000 1650000>;
+			clock-latency-ns = <20>;
+		};
+		opp@298598400 {
+			opp-hz = /bits/ 64 <298598400>;
+			opp-microvolt = <1100000 1045000 1650000>;
+			clock-latency-ns = <20>;
+		};
+		opp@398131200 {
+			opp-hz = /bits/ 64 <398131200>;
+			opp-microvolt = <1300000 1235000 1650000>;
+			clock-latency-ns = <20>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi
index 9e73dc6..e0fab48 100644
--- a/arch/arm/boot/dts/pxa27x.dtsi
+++ b/arch/arm/boot/dts/pxa27x.dtsi
@@ -137,4 +137,44 @@
 		clocks = <&clks CLK_OSTIMER>;
 		status = "okay";
 	};
+
+	pxa270_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+
+		opp@104000000 {
+			opp-hz = /bits/ 64 <104000000>;
+			opp-microvolt = <900000 900000 1705000>;
+			clock-latency-ns = <20>;
+		};
+		opp@156000000 {
+			opp-hz = /bits/ 64 <156000000>;
+			opp-microvolt = <1000000 1000000 1705000>;
+			clock-latency-ns = <20>;
+		};
+		opp@208000000 {
+			opp-hz = /bits/ 64 <208000000>;
+			opp-microvolt = <1180000 1180000 1705000>;
+			clock-latency-ns = <20>;
+		};
+		opp@312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+			opp-microvolt = <1250000 1250000 1705000>;
+			clock-latency-ns = <20>;
+		};
+		opp@416000000 {
+			opp-hz = /bits/ 64 <416000000>;
+			opp-microvolt = <1350000 1350000 1705000>;
+			clock-latency-ns = <20>;
+		};
+		opp@520000000 {
+			opp-hz = /bits/ 64 <520000000>;
+			opp-microvolt = <1450000 1450000 1705000>;
+			clock-latency-ns = <20>;
+		};
+		opp@624000000 {
+			opp-hz = /bits/ 64 <624000000>;
+			opp-microvolt = <1550000 1550000 1705000>;
+			clock-latency-ns = <20>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi
index 3ff077c..e4ebcde 100644
--- a/arch/arm/boot/dts/pxa2xx.dtsi
+++ b/arch/arm/boot/dts/pxa2xx.dtsi
@@ -54,8 +54,8 @@
 			reg = <0x40e00000 0x10000>;
 			gpio-controller;
 			#gpio-cells = <0x2>;
-			interrupts = <10>;
-			interrupt-names = "gpio_mux";
+			interrupts = <8>, <9>, <10>;
+			interrupt-names = "gpio0", "gpio1", "gpio_mux";
 			interrupt-controller;
 			#interrupt-cells = <0x2>;
 			ranges;
diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi
index 9d6f3aa..7a0cc4e 100644
--- a/arch/arm/boot/dts/pxa3xx.dtsi
+++ b/arch/arm/boot/dts/pxa3xx.dtsi
@@ -138,6 +138,7 @@
 			reg = <0x40e10000 0xffff>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			#pinctrl-cells = <1>;
 			pinctrl-single,register-width = <32>;
 			pinctrl-single,function-mask = <0x7>;
 		};
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index 6c00383..4b8872c 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -51,6 +51,29 @@
 			regulator-boot-on;
 		};
 
+		/* GPIO controlled ethernet power regulator */
+		dragon_veth: xc622a331mrg {
+			compatible = "regulator-fixed";
+			regulator-name = "XC6222A331MR-G";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			vin-supply = <&vph>;
+			gpio = <&pm8058_gpio 40 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			pinctrl-names = "default";
+			pinctrl-0 = <&dragon_veth_gpios>;
+			regulator-always-on;
+		};
+
+		/* VDDvario fixed regulator */
+		dragon_vario: nds332p {
+			compatible = "regulator-fixed";
+			regulator-name = "NDS332P";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			vin-supply = <&pm8058_s3>;
+		};
+
 		/* This is a levelshifter for SDCC5 */
 		dragon_vio_txb: txb0104rgyr {
 			compatible = "regulator-fixed";
@@ -167,6 +190,36 @@
 					bias-pull-up;
 				};
 			};
+
+			dragon_ebi2_pins: ebi2 {
+				/*
+				 * Pins used by EBI2 on the Dragonboard, actually only
+				 * CS2 is used by a real peripheral. CS0 is just
+				 * routed to a test point.
+				 */
+				mux0 {
+					pins =
+					    /* "gpio39", CS1A_N this is not good to mux */
+					    "gpio40", /* CS2A_N */
+					    "gpio134"; /* CS0_N testpoint TP29 */
+					function = "ebi2cs";
+				};
+				mux1 {
+					pins =
+					    /* EBI2_ADDR_7 downto EBI2_ADDR_0 address bus */
+					    "gpio123", "gpio124", "gpio125", "gpio126",
+					    "gpio127", "gpio128", "gpio129", "gpio130",
+					    /* EBI2_DATA_15 downto EBI2_DATA_0 data bus */
+					    "gpio135", "gpio136", "gpio137", "gpio138",
+					    "gpio139", "gpio140", "gpio141", "gpio142",
+					    "gpio143", "gpio144", "gpio145", "gpio146",
+					    "gpio147", "gpio148", "gpio149", "gpio150",
+					    "gpio151", /* EBI2_OE_N */
+					    "gpio153", /* EBI2_ADV */
+					    "gpio157"; /* EBI2_WE_N */
+					function = "ebi2";
+				};
+			};
 		};
 
 		qcom,ssbi@500000 {
@@ -201,6 +254,15 @@
 				};
 
 				gpio@150 {
+					dragon_ethernet_gpios: ethernet-gpios {
+						pinconf {
+							pins = "gpio7";
+							function = "normal";
+							input-enable;
+							bias-disable;
+							power-source = <PM8058_GPIO_S3>;
+						};
+					};
 					dragon_bmp085_gpios: bmp085-gpios {
 						pinconf {
 							pins = "gpio16";
@@ -238,6 +300,14 @@
 							power-source = <PM8058_GPIO_S3>;
 						};
 					};
+					dragon_veth_gpios: veth-gpios {
+						pinconf {
+							pins = "gpio40";
+							function = "normal";
+							bias-disable;
+							drive-push-pull;
+						};
+					};
 				};
 
 				led@48 {
@@ -322,6 +392,55 @@
 			};
 		};
 
+		external-bus@1a100000 {
+			/* The EBI2 will instantiate first, then populate its children */
+			status = "ok";
+			pinctrl-names = "default";
+			pinctrl-0 = <&dragon_ebi2_pins>;
+
+			/*
+			 * An on-board SMSC LAN9221 chip for "debug ethernet",
+			 * which is actually just an ordinary ethernet on the
+			 * EBI2. This has a 25MHz chrystal next to it, so no
+			 * clocking is needed.
+			 */
+			ethernet-ebi2@2,0 {
+				compatible = "smsc,lan9221", "smsc,lan9115";
+				reg = <2 0x0 0x100>;
+				/*
+				 * GPIO7 has interrupt 198 on the PM8058
+				 * The second interrupt is the PME interrupt
+				 * for network wakeup, connected to the TLMM.
+				 */
+				interrupts-extended = <&pmicintc 198 IRQ_TYPE_EDGE_FALLING>,
+						    <&tlmm 29 IRQ_TYPE_EDGE_RISING>;
+				reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
+				vdd33a-supply = <&dragon_veth>;
+				vddvario-supply = <&dragon_vario>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&dragon_ethernet_gpios>;
+				phy-mode = "mii";
+				reg-io-width = <2>;
+				smsc,force-external-phy;
+				/* IRQ on edge falling = active low */
+				smsc,irq-active-low;
+				smsc,irq-push-pull;
+
+				/*
+				 * SLOW chipselect config
+				 * Delay 9 cycles (140ns@64MHz) between SMSC
+				 * LAN9221 Ethernet controller reads and writes
+				 * on CS2.
+				 */
+				qcom,xmem-recovery-cycles = <0>;
+				qcom,xmem-write-hold-cycles = <3>;
+				qcom,xmem-write-delta-cycles = <31>;
+				qcom,xmem-read-delta-cycles = <28>;
+				qcom,xmem-write-wait-cycles = <9>;
+				qcom,xmem-read-wait-cycles = <9>;
+			};
+		};
+
 		rpm@104000 {
 			/*
 			 * Set up of the PMIC RPM regulators for this board
diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
index b72e095..e39440a 100644
--- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
@@ -15,6 +15,20 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@88d00000{
+			compatible = "ramoops";
+			reg = <0x88d00000 0x100000>;
+			record-size     = <0x00020000>;
+			console-size    = <0x00020000>;
+			ftrace-size     = <0x00020000>;
+		};
+	};
+
 	ext_3p3v: regulator-fixed@1 {
 		compatible = "regulator-fixed";
 		regulator-min-microvolt = <3300000>;
@@ -99,6 +113,7 @@
 				l2 {
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
 				};
 
 				/* msm_otg-HSUSB_3p3 */
@@ -133,13 +148,14 @@
 					regulator-min-microvolt = <3000000>;
 					regulator-max-microvolt = <3000000>;
 					bias-pull-down;
+					regulator-always-on;
 				};
 
 				/* pwm_power for backlight */
 				l17 {
 					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3600000>;
-					bias-pull-down;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
 				};
 
 				/* camera, qdsp6 */
@@ -184,6 +200,63 @@
 			};
 		};
 
+		mdp@5100000 {
+			status = "okay";
+			ports {
+				port@1 {
+					mdp_dsi1_out: endpoint {
+						remote-endpoint = <&dsi0_in>;
+					};
+				};
+			};
+		};
+
+		dsi0: mdss_dsi@4700000 {
+			status = "okay";
+			vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/
+			vdd-supply = <&pm8921_l8>;
+			vddio-supply = <&pm8921_lvs7>;
+			avdd-supply = <&pm8921_l11>;
+			vcss-supply = <&ext_3p3v>;
+
+			panel@0 {
+				reg = <0>;
+				compatible = "jdi,lt070me05000";
+
+				vddp-supply = <&pm8921_l17>;
+				iovcc-supply = <&pm8921_lvs7>;
+
+				enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
+				reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
+				dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
+
+				port {
+					panel_in: endpoint {
+						remote-endpoint = <&dsi0_out>;
+					};
+				};
+			};
+			ports {
+				port@0 {
+					dsi0_in: endpoint {
+						remote-endpoint = <&mdp_dsi1_out>;
+					};
+				};
+
+				port@1 {
+					dsi0_out: endpoint {
+						remote-endpoint = <&panel_in>;
+						data-lanes = <0 1 2 3>;
+					};
+				};
+			};
+		};
+
+		dsi-phy@4700200 {
+			status = "okay";
+			vddio-supply = <&pm8921_lvs7>;/*VDD_PLL2_1 to 7*/
+		};
+
 		gsbi@16200000 {
 			status = "okay";
 			qcom,mode = <GSBI_PROT_I2C>;
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 2eeb090..3d37cab 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -43,6 +43,17 @@
 		};
 	};
 
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "d";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&hdmi_out>;
+			};
+		};
+	};
+
 	soc {
 		pinctrl@800000 {
 			card_detect: card_detect {
@@ -64,6 +75,25 @@
 					bias-disable;
 				};
 			};
+
+			hdmi_pinctrl: hdmi-pinctrl {
+				mux {
+					pins = "gpio70", "gpio71", "gpio72";
+					function = "hdmi";
+				};
+
+				pinconf_ddc {
+					pins = "gpio70", "gpio71";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				pinconf_hpd {
+					pins = "gpio72";
+					bias-pull-down;
+					drive-strength = <16>;
+				};
+			};
 		};
 
 		rpm@108000 {
@@ -329,5 +359,49 @@
 				mmc-pwrseq = <&sdcc4_pwrseq>;
 			};
 		};
+
+		hdmi-tx@4a00000 {
+			status = "okay";
+
+			core-vdda-supply = <&pm8921_hdmi_switch>;
+			hdmi-mux-supply = <&ext_3p3v>;
+
+			hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&hdmi_pinctrl>;
+
+			ports {
+				port@0 {
+					endpoint {
+						remote-endpoint = <&mdp_dtv_out>;
+					};
+				};
+
+				port@1 {
+					endpoint {
+						remote-endpoint = <&hdmi_con>;
+					};
+				};
+			};
+		};
+
+		hdmi-phy@4a00400 {
+			status = "okay";
+
+			core-vdda-supply = <&pm8921_hdmi_switch>;
+		};
+
+		mdp@5100000 {
+			status = "okay";
+
+			ports {
+				port@3 {
+					endpoint {
+						remote-endpoint = <&hdmi_in>;
+					};
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 1dbe697..268bd47 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -1060,6 +1060,231 @@
 			reg = <0x1a400000 0x100>;
 		};
 
+		gpu: adreno-3xx@4300000 {
+			compatible = "qcom,adreno-3xx";
+			reg = <0x04300000 0x20000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <GIC_SPI 80 0>;
+			interrupt-names = "kgsl_3d0_irq";
+			clock-names =
+			    "core_clk",
+			    "iface_clk",
+			    "mem_clk",
+			    "mem_iface_clk";
+			clocks =
+			    <&mmcc GFX3D_CLK>,
+			    <&mmcc GFX3D_AHB_CLK>,
+			    <&mmcc GFX3D_AXI_CLK>,
+			    <&mmcc MMSS_IMEM_AHB_CLK>;
+			qcom,chipid = <0x03020002>;
+
+			iommus = <&gfx3d 0
+				  &gfx3d 1
+				  &gfx3d 2
+				  &gfx3d 3
+				  &gfx3d 4
+				  &gfx3d 5
+				  &gfx3d 6
+				  &gfx3d 7
+				  &gfx3d 8
+				  &gfx3d 9
+				  &gfx3d 10
+				  &gfx3d 11
+				  &gfx3d 12
+				  &gfx3d 13
+				  &gfx3d 14
+				  &gfx3d 15
+				  &gfx3d 16
+				  &gfx3d 17
+				  &gfx3d 18
+				  &gfx3d 19
+				  &gfx3d 20
+				  &gfx3d 21
+				  &gfx3d 22
+				  &gfx3d 23
+				  &gfx3d 24
+				  &gfx3d 25
+				  &gfx3d 26
+				  &gfx3d 27
+				  &gfx3d 28
+				  &gfx3d 29
+				  &gfx3d 30
+				  &gfx3d 31
+				  &gfx3d1 0
+				  &gfx3d1 1
+				  &gfx3d1 2
+				  &gfx3d1 3
+				  &gfx3d1 4
+				  &gfx3d1 5
+				  &gfx3d1 6
+				  &gfx3d1 7
+				  &gfx3d1 8
+				  &gfx3d1 9
+				  &gfx3d1 10
+				  &gfx3d1 11
+				  &gfx3d1 12
+				  &gfx3d1 13
+				  &gfx3d1 14
+				  &gfx3d1 15
+				  &gfx3d1 16
+				  &gfx3d1 17
+				  &gfx3d1 18
+				  &gfx3d1 19
+				  &gfx3d1 20
+				  &gfx3d1 21
+				  &gfx3d1 22
+				  &gfx3d1 23
+				  &gfx3d1 24
+				  &gfx3d1 25
+				  &gfx3d1 26
+				  &gfx3d1 27
+				  &gfx3d1 28
+				  &gfx3d1 29
+				  &gfx3d1 30
+				  &gfx3d1 31>;
+
+			qcom,gpu-pwrlevels {
+				compatible = "qcom,gpu-pwrlevels";
+				qcom,gpu-pwrlevel@0 {
+					qcom,gpu-freq = <450000000>;
+				};
+				qcom,gpu-pwrlevel@1 {
+					qcom,gpu-freq = <27000000>;
+				};
+			};
+		};
+
+		mmss_sfpb: syscon@5700000 {
+			compatible = "syscon";
+			reg = <0x5700000 0x70>;
+		};
+
+		dsi0: mdss_dsi@4700000 {
+			compatible = "qcom,mdss-dsi-ctrl";
+			label = "MDSS DSI CTRL->0";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 82 0>;
+			reg = <0x04700000 0x200>;
+			reg-names = "dsi_ctrl";
+
+			clocks = <&mmcc DSI_M_AHB_CLK>,
+				<&mmcc DSI_S_AHB_CLK>,
+				<&mmcc AMP_AHB_CLK>,
+				<&mmcc DSI_CLK>,
+				<&mmcc DSI1_BYTE_CLK>,
+				<&mmcc DSI_PIXEL_CLK>,
+				<&mmcc DSI1_ESC_CLK>;
+			clock-names = "iface_clk", "bus_clk", "core_mmss_clk",
+					"src_clk", "byte_clk", "pixel_clk",
+					"core_clk";
+
+			assigned-clocks = <&mmcc DSI1_BYTE_SRC>,
+					<&mmcc DSI1_ESC_SRC>,
+					<&mmcc DSI_SRC>,
+					<&mmcc DSI_PIXEL_SRC>;
+			assigned-clock-parents = <&dsi0_phy 0>,
+						<&dsi0_phy 0>,
+						<&dsi0_phy 1>,
+						<&dsi0_phy 1>;
+			syscon-sfpb = <&mmss_sfpb>;
+			phys = <&dsi0_phy>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi0_in: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					dsi0_out: endpoint {
+					};
+				};
+			};
+		};
+
+
+		dsi0_phy: dsi-phy@4700200 {
+			compatible = "qcom,dsi-phy-28nm-8960";
+			#clock-cells = <1>;
+
+			reg = <0x04700200 0x100>,
+				<0x04700300 0x200>,
+				<0x04700500 0x5c>;
+			reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator";
+			clock-names = "iface_clk";
+			clocks = <&mmcc DSI_M_AHB_CLK>;
+		};
+
+
+		mdp_port0: iommu@7500000 {
+			compatible = "qcom,apq8064-iommu";
+			#iommu-cells = <1>;
+			clock-names =
+			    "smmu_pclk",
+			    "iommu_clk";
+			clocks =
+			    <&mmcc SMMU_AHB_CLK>,
+			    <&mmcc MDP_AXI_CLK>;
+			reg = <0x07500000 0x100000>;
+			interrupts =
+			    <GIC_SPI 63 0>,
+			    <GIC_SPI 64 0>;
+			qcom,ncb = <2>;
+		};
+
+		mdp_port1: iommu@7600000 {
+			compatible = "qcom,apq8064-iommu";
+			#iommu-cells = <1>;
+			clock-names =
+			    "smmu_pclk",
+			    "iommu_clk";
+			clocks =
+			    <&mmcc SMMU_AHB_CLK>,
+			    <&mmcc MDP_AXI_CLK>;
+			reg = <0x07600000 0x100000>;
+			interrupts =
+			    <GIC_SPI 61 0>,
+			    <GIC_SPI 62 0>;
+			qcom,ncb = <2>;
+		};
+
+		gfx3d: iommu@7c00000 {
+			compatible = "qcom,apq8064-iommu";
+			#iommu-cells = <1>;
+			clock-names =
+			    "smmu_pclk",
+			    "iommu_clk";
+			clocks =
+			    <&mmcc SMMU_AHB_CLK>,
+			    <&mmcc GFX3D_AXI_CLK>;
+			reg = <0x07c00000 0x100000>;
+			interrupts =
+			    <GIC_SPI 69 0>,
+			    <GIC_SPI 70 0>;
+			qcom,ncb = <3>;
+		};
+
+		gfx3d1: iommu@7d00000 {
+			compatible = "qcom,apq8064-iommu";
+			#iommu-cells = <1>;
+			clock-names =
+			    "smmu_pclk",
+			    "iommu_clk";
+			clocks =
+			    <&mmcc SMMU_AHB_CLK>,
+			    <&mmcc GFX3D_AXI_CLK>;
+			reg = <0x07d00000 0x100000>;
+			interrupts =
+			    <GIC_SPI 210 0>,
+			    <GIC_SPI 211 0>;
+			qcom,ncb = <3>;
+		};
+
 		pcie: pci@1b500000 {
 			compatible = "qcom,pcie-apq8064", "snps,dw-pcie";
 			reg = <0x1b500000 0x1000
@@ -1095,6 +1320,102 @@
 			reset-names = "axi", "ahb", "por", "pci", "phy";
 			status = "disabled";
 		};
+
+		hdmi: hdmi-tx@4a00000 {
+			compatible = "qcom,hdmi-tx-8960";
+			reg = <0x04a00000 0x2f0>;
+			reg-names = "core_physical";
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mmcc HDMI_APP_CLK>,
+				 <&mmcc HDMI_M_AHB_CLK>,
+				 <&mmcc HDMI_S_AHB_CLK>;
+			clock-names = "core_clk",
+				      "master_iface_clk",
+				      "slave_iface_clk";
+
+			phys = <&hdmi_phy>;
+			phy-names = "hdmi-phy";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					hdmi_in: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					hdmi_out: endpoint {
+					};
+				};
+			};
+		};
+
+		hdmi_phy: hdmi-phy@4a00400 {
+			compatible = "qcom,hdmi-phy-8960";
+			reg = <0x4a00400 0x60>,
+			      <0x4a00500 0x100>;
+			reg-names = "hdmi_phy",
+				    "hdmi_pll";
+
+			clocks = <&mmcc HDMI_S_AHB_CLK>;
+			clock-names = "slave_iface_clk";
+		};
+
+		mdp: mdp@5100000 {
+			compatible = "qcom,mdp4";
+			reg = <0x05100000 0xf0000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mmcc MDP_CLK>,
+				 <&mmcc MDP_AHB_CLK>,
+				 <&mmcc MDP_AXI_CLK>,
+				 <&mmcc MDP_LUT_CLK>,
+				 <&mmcc HDMI_TV_CLK>,
+				 <&mmcc MDP_TV_CLK>;
+			clock-names = "core_clk",
+				      "iface_clk",
+				      "bus_clk",
+				      "lut_clk",
+				      "hdmi_clk",
+				      "tv_clk";
+
+			iommus = <&mdp_port0 0
+				  &mdp_port0 2
+				  &mdp_port1 0
+				  &mdp_port1 2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					mdp_lvds_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					mdp_dsi1_out: endpoint {
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					mdp_dsi2_out: endpoint {
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					mdp_dtv_out: endpoint {
+					};
+				};
+			};
+		};
 	};
 };
 #include "qcom-apq8064-pins.dtsi"
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index 39eb7a4..80d4886 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -182,13 +182,13 @@
 	};
 
 	clocks {
-		xo_board {
+		xo_board: xo_board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <19200000>;
 		};
 
-		sleep_clk {
+		sleep_clk: sleep_clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
@@ -416,8 +416,10 @@
 			reg-names = "hc_mem", "core_mem";
 			interrupts = <0 123 0>, <0 138 0>;
 			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
-			clock-names = "core", "iface";
+			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "core", "iface", "xo";
 			status = "disabled";
 		};
 
@@ -427,8 +429,10 @@
 			reg-names = "hc_mem", "core_mem";
 			interrupts = <0 125 0>, <0 221 0>;
 			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>;
-			clock-names = "core", "iface";
+			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "core", "iface", "xo";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
new file mode 100644
index 0000000..26160c3
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
@@ -0,0 +1,281 @@
+/*
+ * Device Tree Source for mangOH Green Board with WP8548 Module
+ *
+ * Copyright (C) 2016 BayLibre, SAS.
+ * Author : Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/input/input.h>
+
+#include "qcom-mdm9615-wp8548.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MangOH Green with WP8548 Module";
+	compatible = "swir,mangoh-green-wp8548", "swir,wp8548", "qcom,mdm9615";
+
+	aliases {
+		spi0 = &gsbi3_spi;
+		serial0 = &gsbi4_serial;
+		serial1 = &gsbi5_serial;
+		i2c0 = &gsbi5_i2c;
+		mmc0 = &sdcc1;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&msmgpio {
+	/* MangOH GPIO Mapping :
+	 * - 2 : GPIOEXP_INT2
+	 * - 7 : IOT1_GPIO2
+	 * - 8 : IOT0_GPIO4
+	 * - 13: IOT0_GPIO3
+	 * - 21: IOT1_GPIO4
+	 * - 22: IOT2_GPIO1
+	 * - 23: IOT2_GPIO2
+	 * - 24: IOT2_GPIO3
+	 * - 25: IOT1_GPIO1
+	 * - 32: IOT1_GPIO3
+	 * - 33: IOT0_GPIO2
+	 * - 42: IOT0_GPIO1 and SD Card Detect
+	 */
+
+	gpioext1_pins: gpioext1_pins {
+		pins {
+			pins = "gpio2";
+			function = "gpio";
+			input-enable;
+			bias-disable;
+		};
+	};
+
+	sdc_cd_pins: sdc_cd_pins {
+		pins {
+			pins = "gpio42";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
+
+&gsbi3_spi {
+	spi@0 {
+		compatible = "swir,mangoh-iotport-spi", "spidev";
+		spi-max-frequency = <24000000>;
+		reg = <0>;
+	};
+};
+
+&gsbi5_i2c {
+	mux@71 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		i2c_iot0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_iot1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_iot2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			usbhub: hub@8 {
+				compatible = "smsc,usb3503a";
+				reg = <0x8>;
+				connect-gpios = <&gpioext2 1 GPIO_ACTIVE_HIGH>;
+				intn-gpios = <&gpioext2 0 GPIO_ACTIVE_LOW>;
+				initial-mode = <1>;
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			gpioext0: gpio@3e {
+				/* GPIO Expander 0 Mapping :
+				 * - 0: ARDUINO_RESET_Level shift
+				 * - 1: BattChrgr_PG_N
+				 * - 2: BattGauge_GPIO
+				 * - 3: LED_ON (out active high)
+				 * - 4: ATmega_reset_GPIO
+				 * - 5: X
+				 * - 6: PCM_ANALOG_SELECT (out active high)
+				 * - 7: X
+				 * - 8: Board_rev_res1 (in)
+				 * - 9: Board_rev_res2 (in)
+				 * - 10: UART_EXP1_ENn (out active low / pull-down)
+				 * - 11: UART_EXP1_IN (out pull-down)
+				 * - 12: UART_EXP2_IN (out pull-down)
+				 * - 13: SDIO_SEL (out pull-down)
+				 * - 14: SPI_EXP1_ENn (out active low / pull-down)
+				 * - 15: SPI_EXP1_IN (out pull-down)
+				 */
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "semtech,sx1509q";
+				reg = <0x3e>;
+				interrupt-parent = <&gpioext1>;
+				interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+
+				probe-reset;
+
+				gpio-controller;
+				interrupt-controller;
+			};
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			gpioext1: gpio@3f {
+				/* GPIO Expander 1 Mapping :
+				 * - 0: GPIOEXP_INT1
+				 * - 1: Battery detect
+				 * - 2: GPIO_SCF3_RESET
+				 * - 3: LED_CARD_DETECT_IOT0 (in)
+				 * - 4: LED_CARD_DETECT_IOT1 (in)
+				 * - 5: LED_CARD_DETECT_IOT2 (in)
+				 * - 6: UIM2_PWM_SELECT
+				 * - 7: UIM2_M2_S_SELECT
+				 * - 8: TP900
+				 * - 9: SENSOR_INT1 (in)
+				 * - 10: SENSOR_INT2 (in)
+				 * - 11: CARD_DETECT_IOT0 (in pull-up)
+				 * - 12: CARD_DETECT_IOT2 (in pull-up)
+				 * - 13: CARD_DETECT_IOT1 (in pull-up)
+				 * - 14: GPIOEXP_INT3 (in active low / pull-up)
+				 * - 15: BattChrgr_INT_N
+				 */
+				pinctrl-0 = <&gpioext1_pins>;
+				pinctrl-names = "default";
+
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "semtech,sx1509q";
+				reg = <0x3f>;
+				interrupt-parent = <&msmgpio>;
+				interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+
+				probe-reset;
+
+				gpio-controller;
+				interrupt-controller;
+			};
+		};
+
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			gpioext2: gpio@70 {
+				/* GPIO Expander 2 Mapping :
+				 * - 0: USB_HUB_INTn
+				 * - 1: HUB_CONNECT
+				 * - 2: GPIO_IOT2_RESET (out active low / pull-up)
+				 * - 3: GPIO_IOT1_RESET (out active low / pull-up)
+				 * - 4: GPIO_IOT0_RESET (out active low / pull-up)
+				 * - 5: TP901
+				 * - 6: TP902
+				 * - 7: TP903
+				 * - 8: UART_EXP2_ENn (out active low / pull-down)
+				 * - 9: PCM_EXP1_ENn (out active low)
+				 * - 10: PCM_EXP1_SEL (out)
+				 * - 11: ARD_FTDI
+				 * - 12: TP904
+				 * - 13: TP905
+				 * - 14: TP906
+				 * - 15: RS232_Enable (out active high / pull-up)
+				 */
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "semtech,sx1509q";
+				reg = <0x70>;
+				interrupt-parent = <&gpioext1>;
+				interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+
+				probe-reset;
+
+				gpio-controller;
+				interrupt-controller;
+			};
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&sdcc1 {
+	pinctrl-0 = <&sdc_cd_pins>;
+	pinctrl-names = "default";
+	disable-wp;
+	cd-gpios = <&msmgpio 42 GPIO_ACTIVE_LOW>; /* Active low CD */
+};
diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
new file mode 100644
index 0000000..7869898
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
@@ -0,0 +1,170 @@
+/*
+ * Device Tree Source for Sierra Wireless WP8548 Module
+ *
+ * Copyright (C) 2016 BayLibre, SAS.
+ * Author : Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "qcom-mdm9615.dtsi"
+
+/ {
+	model = "Sierra Wireless WP8548 Module";
+	compatible = "swir,wp8548", "qcom,mdm9615";
+
+	memory {
+		reg = <0x48000000 0x7F00000>;
+	};
+};
+
+&msmgpio {
+	pinctrl-0 = <&reset_out_pins>;
+	pinctrl-names = "default";
+
+	gsbi3_pins: gsbi3_pins {
+		mux {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			function = "gsbi3";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	gsbi4_pins: gsbi4_pins {
+		mux {
+			pins = "gpio12", "gpio13", "gpio14", "gpio15";
+			function = "gsbi4";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	gsbi5_i2c_pins: gsbi5_i2c_pins {
+		pin16 {
+			pins = "gpio16";
+			function = "gsbi5_i2c";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		pin17 {
+			pins = "gpio17";
+			function = "gsbi5_i2c";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	gsbi5_uart_pins: gsbi5_uart_pins {
+		mux {
+			pins = "gpio18", "gpio19";
+			function = "gsbi5_uart";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	reset_out_pins: reset_out_pins {
+		pins {
+			pins = "gpio66";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+			output-high;
+		};
+	};
+};
+
+&pmicgpio {
+	usb_vbus_5v_pins: usb_vbus_5v_pins {
+		pins = "gpio4";
+		function = "normal";
+		output-high;
+		bias-disable;
+		qcom,drive-strength = <1>;
+		power-source = <2>;
+	};
+};
+
+&gsbi3 {
+	status = "ok";
+	qcom,mode = <GSBI_PROT_SPI>;
+};
+
+&gsbi3_spi {
+	status = "ok";
+	pinctrl-0 = <&gsbi3_pins>;
+	pinctrl-names = "default";
+	assigned-clocks = <&gcc GSBI3_QUP_CLK>;
+	assigned-clock-rates = <24000000>;
+};
+
+&gsbi4 {
+	status = "ok";
+	qcom,mode = <GSBI_PROT_UART_W_FC>;
+};
+
+&gsbi4_serial {
+	status = "ok";
+	pinctrl-0 = <&gsbi4_pins>;
+	pinctrl-names = "default";
+};
+
+&gsbi5 {
+	status = "ok";
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+};
+
+&gsbi5_i2c {
+	status = "ok";
+	clock-frequency = <200000>;
+	pinctrl-0 = <&gsbi5_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&gsbi5_serial {
+	status = "ok";
+	pinctrl-0 = <&gsbi5_uart_pins>;
+	pinctrl-names = "default";
+};
+
+&sdcc1 {
+	status = "ok";
+};
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
new file mode 100644
index 0000000..5ae4ec5
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -0,0 +1,557 @@
+/*
+ * Device Tree Source for Qualcomm MDM9615 SoC
+ *
+ * Copyright (C) 2016 BayLibre, SAS.
+ * Author : Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-mdm9615.h>
+#include <dt-bindings/reset/qcom,gcc-mdm9615.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+
+/ {
+	model = "Qualcomm MDM9615";
+	compatible = "qcom,mdm9615";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a5";
+			device_type = "cpu";
+			next-level-cache = <&L2>;
+		};
+	};
+
+	cpu-pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	clocks {
+		cxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+	};
+
+	regulators {
+		vsdcc_fixed: vsdcc-regulator {
+			compatible = "regulator-fixed";
+			regulator-name = "SDCC Power";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-always-on;
+		};
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		L2: l2-cache@2040000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x02040000 0x1000>;
+			arm,data-latency = <2 2 0>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		intc: interrupt-controller@2000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x02000000 0x1000>,
+			      <0x02002000 0x1000>;
+		};
+
+		timer@200a000 {
+			compatible = "qcom,kpss-timer", "qcom,msm-timer";
+			interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>;
+			reg = <0x0200a000 0x100>;
+			clock-frequency = <27000000>,
+					  <32768>;
+			cpu-offset = <0x80000>;
+		};
+
+		msmgpio: pinctrl@800000 {
+			compatible = "qcom,mdm9615-pinctrl";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x800000 0x4000>;
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-mdm9615";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x900000 0x4000>;
+		};
+
+		lcc: clock-controller@28000000 {
+			compatible = "qcom,lcc-mdm9615";
+			reg = <0x28000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		l2cc: clock-controller@2011000 {
+			compatible = "syscon";
+			reg = <0x02011000 0x1000>;
+		};
+
+		rng@1a500000 {
+			compatible = "qcom,prng";
+			reg = <0x1a500000 0x200>;
+			clocks = <&gcc PRNG_CLK>;
+			clock-names = "core";
+			assigned-clocks = <&gcc PRNG_CLK>;
+			assigned-clock-rates = <32000000>;
+		};
+
+		gsbi2: gsbi@16100000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <2>;
+			reg = <0x16100000 0x100>;
+			clocks = <&gcc GSBI2_H_CLK>;
+			clock-names = "iface";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi2_i2c: i2c@16180000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x16180000 0x1000>;
+				interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		gsbi3: gsbi@16200000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <3>;
+			reg = <0x16200000 0x100>;
+			clocks = <&gcc GSBI3_H_CLK>;
+			clock-names = "iface";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi3_spi: spi@16280000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x16280000 0x1000>;
+				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <24000000>;
+
+				clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		gsbi4: gsbi@16300000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <4>;
+			reg = <0x16300000 0x100>;
+			clocks = <&gcc GSBI4_H_CLK>;
+			clock-names = "iface";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi4_serial: serial@16340000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16340000 0x1000>,
+				      <0x16300000 0x1000>;
+				interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		gsbi5: gsbi@16400000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <5>;
+			reg = <0x16400000 0x100>;
+			clocks = <&gcc GSBI5_H_CLK>;
+			clock-names = "iface";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi5_i2c: i2c@16480000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x16480000 0x1000>;
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+
+				/* QUP clock is not initialized, set rate */
+				assigned-clocks = <&gcc GSBI5_QUP_CLK>;
+				assigned-clock-rates = <24000000>;
+
+				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi5_serial: serial@16440000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16440000 0x1000>,
+				      <0x16400000 0x1000>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		qcom,ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+
+			pmicintc: pmic@0 {
+				compatible = "qcom,pm8018", "qcom,pm8921";
+				interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pwrkey@1c {
+					compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey";
+					reg = <0x1c>;
+					interrupt-parent = <&pmicintc>;
+					interrupts = <50 IRQ_TYPE_EDGE_RISING>,
+						     <51 IRQ_TYPE_EDGE_RISING>;
+					debounce = <15625>;
+					pull-up;
+				};
+
+				pmicmpp: mpp@50 {
+					compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
+					interrupt-parent = <&pmicintc>;
+					interrupts = <24 IRQ_TYPE_NONE>,
+						     <25 IRQ_TYPE_NONE>,
+						     <26 IRQ_TYPE_NONE>,
+						     <27 IRQ_TYPE_NONE>,
+						     <28 IRQ_TYPE_NONE>,
+						     <29 IRQ_TYPE_NONE>;
+					reg = <0x50>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+
+				rtc@11d {
+					compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
+					interrupt-parent = <&pmicintc>;
+					interrupts = <39 IRQ_TYPE_EDGE_RISING>;
+					reg = <0x11d>;
+					allow-set-time;
+				};
+
+				pmicgpio: gpio@150 {
+					compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
+					interrupt-parent = <&pmicintc>;
+					interrupts = <24 IRQ_TYPE_NONE>,
+						     <25 IRQ_TYPE_NONE>,
+						     <26 IRQ_TYPE_NONE>,
+						     <27 IRQ_TYPE_NONE>,
+						     <28 IRQ_TYPE_NONE>,
+						     <29 IRQ_TYPE_NONE>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+			};
+		};
+
+		sdcc1bam: dma@12182000{
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12182000 0x8000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		sdcc2bam: dma@12142000{
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12142000 0x8000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC2_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		amba {
+			compatible = "arm,amba-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			sdcc1: sdcc@12180000 {
+				status = "disabled";
+				compatible = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				reg = <0x12180000 0x2000>;
+				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names	= "cmd_irq";
+				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <8>;
+				max-frequency = <48000000>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				vmmc-supply = <&vsdcc_fixed>;
+				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+				dma-names = "tx", "rx";
+				assigned-clocks = <&gcc SDC1_CLK>;
+				assigned-clock-rates = <400000>;
+			};
+
+			sdcc2: sdcc@12140000 {
+				compatible = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				status = "disabled";
+				reg = <0x12140000 0x2000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names	= "cmd_irq";
+				clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <4>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency = <48000000>;
+				no-1-8-v;
+				vmmc-supply = <&vsdcc_fixed>;
+				dmas = <&sdcc2bam 2>, <&sdcc2bam 1>;
+				dma-names = "tx", "rx";
+				assigned-clocks = <&gcc SDC2_CLK>;
+				assigned-clock-rates = <400000>;
+			};
+		};
+
+		tcsr: syscon@1a400000 {
+			compatible = "qcom,tcsr-mdm9615", "syscon";
+			reg = <0x1a400000 0x100>;
+		};
+
+		rpm: rpm@108000 {
+			compatible = "qcom,rpm-mdm9615";
+			reg = <0x108000 0x1000>;
+
+			qcom,ipc = <&l2cc 0x8 2>;
+
+			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names	= "ack", "err", "wakeup";
+
+			regulators {
+				compatible = "qcom,rpm-pm8018-regulators";
+
+				vin_lvs1-supply = <&pm8018_s3>;
+
+				vdd_l7-supply = <&pm8018_s4>;
+				vdd_l8-supply = <&pm8018_s3>;
+				vdd_l9_l10_l11_l12-supply = <&pm8018_s5>;
+
+				/* Buck SMPS */
+				pm8018_s1: s1 {
+					regulator-min-microvolt = <500000>;
+					regulator-max-microvolt = <1150000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				pm8018_s2: s2 {
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				pm8018_s3: s3 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				pm8018_s4: s4 {
+					regulator-min-microvolt = <2100000>;
+					regulator-max-microvolt = <2200000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				pm8018_s5: s5 {
+					regulator-always-on;
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				/* PMOS LDO */
+				pm8018_l2: l2 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8018_l3: l3 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8018_l4: l4 {
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					bias-pull-down;
+				};
+
+				pm8018_l5: l5 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					bias-pull-down;
+				};
+
+				pm8018_l6: l6 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <2850000>;
+					bias-pull-down;
+				};
+
+				pm8018_l7: l7 {
+					regulator-min-microvolt = <1850000>;
+					regulator-max-microvolt = <1900000>;
+					bias-pull-down;
+				};
+
+				pm8018_l8: l8 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				pm8018_l9: l9 {
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1150000>;
+					bias-pull-down;
+				};
+
+				pm8018_l10: l10 {
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					bias-pull-down;
+				};
+
+				pm8018_l11: l11 {
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					bias-pull-down;
+				};
+
+				pm8018_l12: l12 {
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					bias-pull-down;
+				};
+
+				pm8018_l13: l13 {
+					regulator-min-microvolt = <1850000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8018_l14: l14 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					bias-pull-down;
+				};
+
+				/* Low Voltage Switch */
+				pm8018_lvs1: lvs1 {
+					bias-pull-down;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index 8c65e0d..4d828f8 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -141,6 +141,23 @@
 			};
 		};
 
+		external-bus@1a100000 {
+			compatible = "qcom,msm8660-ebi2";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x1a800000 0x00800000>,
+				 <1 0x0 0x1b000000 0x00800000>,
+				 <2 0x0 0x1b800000 0x00800000>,
+				 <3 0x0 0x1d000000 0x08000000>,
+				 <4 0x0 0x1c800000 0x00800000>,
+				 <5 0x0 0x1c000000 0x00800000>;
+			reg = <0x1a100000 0x1000>, <0x1a110000 0x1000>;
+			reg-names = "ebi2", "xmem";
+			clocks = <&gcc EBI2_2X_CLK>, <&gcc EBI2_CLK>;
+			clock-names = "ebi2x", "ebi2";
+			status = "disabled";
+		};
+
 		qcom,ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x500000 0x1000>;
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index c0fb4a6..382bcc3 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -224,6 +224,35 @@
 		status = "ok";
 	};
 
+	pinctrl@fd510000 {
+		sdhc1_pin_a: sdhc1-pin-active {
+			clk {
+				pins = "sdc1_clk";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			cmd-data {
+				pins = "sdc1_cmd", "sdc1_data";
+				drive-strength = <10>;
+				bias-pull-up;
+			};
+		};
+	};
+
+	sdhci@f9824900 {
+		status = "ok";
+
+		vmmc-supply = <&pm8941_l20>;
+		vqmmc-supply = <&pm8941_s3>;
+
+		bus-width = <8>;
+		non-removable;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdhc1_pin_a>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		input-name = "gpio-keys";
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index d210947..49d579f 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -220,13 +220,13 @@
 	};
 
 	clocks {
-		xo_board {
+		xo_board: xo_board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <19200000>;
 		};
 
-		sleep_clk {
+		sleep_clk: sleep_clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
@@ -558,8 +558,10 @@
 			reg-names = "hc_mem", "core_mem";
 			interrupts = <0 123 0>, <0 138 0>;
 			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
-			clock-names = "core", "iface";
+			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "core", "iface", "xo";
 			status = "disabled";
 		};
 
@@ -569,8 +571,10 @@
 			reg-names = "hc_mem", "core_mem";
 			interrupts = <0 125 0>, <0 221 0>;
 			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>;
-			clock-names = "core", "iface";
+			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "core", "iface", "xo";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts
index e5dea5b..dd44181 100644
--- a/arch/arm/boot/dts/r7s72100-rskrza1.dts
+++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts
@@ -56,6 +56,11 @@
 	};
 };
 
+&sdhi1 {
+	bus-width = <4>;
+	status = "okay";
+};
+
 &scif2 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index fb9ef9c..3dd427d 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -117,6 +117,15 @@
 			clock-output-names = "ether";
 		};
 
+		mstp8_clks: mstp8_clks@fcfe0434 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0434 4>;
+			clocks = <&p1_clk>;
+			clock-indices = <R7S72100_CLK_MMCIF>;
+			clock-output-names = "mmcif";
+		};
+
 		mstp9_clks: mstp9_clks@fcfe0438 {
 			#clock-cells = <1>;
 			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -140,6 +149,14 @@
 			>;
 			clock-output-names = "spi0", "spi1", "spi2", "spi3", "spi4";
 		};
+		mstp12_clks: mstp12_clks@fcfe0444 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0444 4>;
+			clocks = <&p1_clk>, <&p1_clk>;
+			clock-indices = <R7S72100_CLK_SDHI1 R7S72100_CLK_SDHI0>;
+			clock-output-names = "sdhi1", "sdhi0";
+		};
 	};
 
 	cpus {
@@ -441,4 +458,42 @@
 		#size-cells = <0>;
 		status = "disabled";
 	};
+
+	mmcif: mmc@e804c800 {
+		compatible = "renesas,mmcif-r7s72100", "renesas,sh-mmcif";
+		reg = <0xe804c800 0x80>;
+		interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R7S72100_CLK_MMCIF>;
+		reg-io-width = <4>;
+		bus-width = <8>;
+		status = "disabled";
+	};
+
+	sdhi0: sd@e804e000 {
+		compatible = "renesas,sdhi-r7s72100";
+		reg = <0xe804e000 0x100>;
+		interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&mstp12_clks R7S72100_CLK_SDHI0>;
+		cap-sd-highspeed;
+		cap-sdio-irq;
+		status = "disabled";
+	};
+
+	sdhi1: sd@e804e800 {
+		compatible = "renesas,sdhi-r7s72100";
+		reg = <0xe804e800 0x100>;
+		interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&mstp12_clks R7S72100_CLK_SDHI1>;
+		cap-sd-highspeed;
+		cap-sdio-irq;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index ca86727..53183ff 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -751,6 +751,11 @@
 		};
 	};
 
+	prr: chipid@ff000044 {
+		compatible = "renesas,prr";
+		reg = <0 0xff000044 0 4>;
+	};
+
 	sysc: system-controller@e6180000 {
 		compatible = "renesas,sysc-r8a73a4", "renesas,sysc-rmobile";
 		reg = <0 0xe6180000 0 0x8000>, <0 0xe6188000 0 0x8000>;
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 159e04e..34159a8 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -8,8 +8,6 @@
  * kind, whether express or implied.
  */
 
-/include/ "skeleton.dtsi"
-
 #include <dt-bindings/clock/r8a7740-clock.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -17,6 +15,8 @@
 / {
 	compatible = "renesas,r8a7740";
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	cpus {
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
new file mode 100644
index 0000000..3a22538
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
@@ -0,0 +1,57 @@
+/*
+ * Device Tree Source for the SK-RZG1M board
+ *
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7743.dtsi"
+
+/ {
+	model = "SK-RZG1M";
+	compatible = "renesas,sk-rzg1m", "renesas,r8a7743";
+
+	aliases {
+		serial0 = &scif0;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	memory@200000000 {
+		device_type = "memory";
+		reg = <2 0x00000000 0 0x40000000>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&scif0 {
+	status = "okay";
+};
+
+&ether {
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
new file mode 100644
index 0000000..216cb1f
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -0,0 +1,476 @@
+/*
+ * Device Tree Source for the r8a7743 SoC
+ *
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r8a7743-cpg-mssr.h>
+#include <dt-bindings/power/r8a7743-sysc.h>
+
+/ {
+	compatible = "renesas,r8a7743";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1500000000>;
+			clocks = <&cpg CPG_CORE R8A7743_CLK_Z>;
+			power-domains = <&sysc R8A7743_PD_CA15_CPU0>;
+			next-level-cache = <&L2_CA15>;
+		};
+
+		L2_CA15: cache-controller@0 {
+			compatible = "cache";
+			reg = <0>;
+			cache-unified;
+			cache-level = <2>;
+			power-domains = <&sysc R8A7743_PD_CA15_SCU>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@f1001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0 0xf1001000 0 0x1000>,
+			      <0 0xf1002000 0 0x1000>,
+			      <0 0xf1004000 0 0x2000>,
+			      <0 0xf1006000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		irqc: interrupt-controller@e61c0000 {
+			compatible = "renesas,irqc-r8a7743", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+		};
+
+		timer {
+			compatible = "arm,armv7-timer";
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a7743-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&usb_extal_clk>;
+			clock-names = "extal", "usb_extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7743-sysc";
+			reg = <0 0xe6180000 0 0x200>;
+			#power-domain-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a7743-rst";
+			reg = <0 0xe6160000 0 0x100>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a7743",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x20000>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		dmac1: dma-controller@e6720000 {
+			compatible = "renesas,dmac-r8a7743",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6720000 0 0x20000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		scifa0: serial@e6c40000 {
+			compatible = "renesas,scifa-r8a7743",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c40000 0 0x40>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+			       <&dmac1 0x21>, <&dmac1 0x22>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifa1: serial@e6c50000 {
+			compatible = "renesas,scifa-r8a7743",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c50000 0 0x40>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+			       <&dmac1 0x25>, <&dmac1 0x26>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifa2: serial@e6c60000 {
+			compatible = "renesas,scifa-r8a7743",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c60000 0 0x40>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+			       <&dmac1 0x27>, <&dmac1 0x28>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifa3: serial@e6c70000 {
+			compatible = "renesas,scifa-r8a7743",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c70000 0 0x40>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1106>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+			       <&dmac1 0x1b>, <&dmac1 0x1c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifa4: serial@e6c78000 {
+			compatible = "renesas,scifa-r8a7743",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c78000 0 0x40>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1107>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+			       <&dmac1 0x1f>, <&dmac1 0x20>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifa5: serial@e6c80000 {
+			compatible = "renesas,scifa-r8a7743",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c80000 0 0x40>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1108>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+			       <&dmac1 0x23>, <&dmac1 0x24>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifb0: serial@e6c20000 {
+			compatible = "renesas,scifb-r8a7743",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c20000 0 0x100>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+		       <&dmac1 0x3d>, <&dmac1 0x3e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifb1: serial@e6c30000 {
+			compatible = "renesas,scifb-r8a7743",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c30000 0 0x100>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+			       <&dmac1 0x19>, <&dmac1 0x1a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifb2: serial@e6ce0000 {
+			compatible = "renesas,scifb-r8a7743",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6ce0000 0 0x100>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 216>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+			       <&dmac1 0x1d>, <&dmac1 0x1e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a7743",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 0x40>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 721>,
+				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+			       <&dmac1 0x29>, <&dmac1 0x2a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a7743",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 0x40>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 720>,
+				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+			       <&dmac1 0x2d>, <&dmac1 0x2e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e58000 {
+			compatible = "renesas,scif-r8a7743",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e58000 0 0x40>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 719>,
+				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+			       <&dmac1 0x2b>, <&dmac1 0x2c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6ea8000 {
+			compatible = "renesas,scif-r8a7743",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ea8000 0 0x40>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 718>,
+				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+			       <&dmac1 0x2f>, <&dmac1 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6ee0000 {
+			compatible = "renesas,scif-r8a7743",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ee0000 0 0x40>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 715>,
+				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+			       <&dmac1 0xfb>, <&dmac1 0xfc>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6ee8000 {
+			compatible = "renesas,scif-r8a7743",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ee8000 0 0x40>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>,
+				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+			       <&dmac1 0xfd>, <&dmac1 0xfe>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e62c0000 {
+			compatible = "renesas,hscif-r8a7743",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c0000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 717>,
+				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+			       <&dmac1 0x39>, <&dmac1 0x3a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e62c8000 {
+			compatible = "renesas,hscif-r8a7743",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c8000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>,
+				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+			       <&dmac1 0x4d>, <&dmac1 0x4e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e62d0000 {
+			compatible = "renesas,hscif-r8a7743",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62d0000 0 0x60>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 713>,
+				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+			       <&dmac1 0x3b>, <&dmac1 0x3c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		ether: ethernet@ee700000 {
+			compatible = "renesas,ether-r8a7743";
+			reg = <0 0xee700000 0 0x400>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 813>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			phy-mode = "rmii";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+	};
+
+	/* External root clock */
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	/* External USB clock - can be overridden by the board */
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+
+	/* External SCIF clock */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
new file mode 100644
index 0000000..97840b3
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
@@ -0,0 +1,52 @@
+/*
+ * Device Tree Source for the SK-RZG1E board
+ *
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7745.dtsi"
+
+/ {
+	model = "SK-RZG1E";
+	compatible = "renesas,sk-rzg1e", "renesas,r8a7745";
+
+	aliases {
+		serial0 = &scif2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&scif2 {
+	status = "okay";
+};
+
+&ether {
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
new file mode 100644
index 0000000..0b2e2f3
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -0,0 +1,476 @@
+/*
+ * Device Tree Source for the r8a7745 SoC
+ *
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r8a7745-cpg-mssr.h>
+#include <dt-bindings/power/r8a7745-sysc.h>
+
+/ {
+	compatible = "renesas,r8a7745";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+			clock-frequency = <1000000000>;
+			clocks = <&cpg CPG_CORE R8A7745_CLK_Z2>;
+			power-domains = <&sysc R8A7745_PD_CA7_CPU0>;
+			next-level-cache = <&L2_CA7>;
+		};
+
+		L2_CA7: cache-controller@0 {
+			compatible = "cache";
+			reg = <0>;
+			cache-unified;
+			cache-level = <2>;
+			power-domains = <&sysc R8A7745_PD_CA7_SCU>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@f1001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0 0xf1001000 0 0x1000>,
+			      <0 0xf1002000 0 0x1000>,
+			      <0 0xf1004000 0 0x2000>,
+			      <0 0xf1006000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		irqc: interrupt-controller@e61c0000 {
+			compatible = "renesas,irqc-r8a7745", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+		};
+
+		timer {
+			compatible = "arm,armv7-timer";
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a7745-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&usb_extal_clk>;
+			clock-names = "extal", "usb_extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7745-sysc";
+			reg = <0 0xe6180000 0 0x200>;
+			#power-domain-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a7745-rst";
+			reg = <0 0xe6160000 0 0x100>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a7745",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x20000>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		dmac1: dma-controller@e6720000 {
+			compatible = "renesas,dmac-r8a7745",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6720000 0 0x20000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		scifa0: serial@e6c40000 {
+			compatible = "renesas,scifa-r8a7745",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c40000 0 0x40>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+			       <&dmac1 0x21>, <&dmac1 0x22>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifa1: serial@e6c50000 {
+			compatible = "renesas,scifa-r8a7745",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c50000 0 0x40>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+			       <&dmac1 0x25>, <&dmac1 0x26>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifa2: serial@e6c60000 {
+			compatible = "renesas,scifa-r8a7745",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c60000 0 0x40>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+			       <&dmac1 0x27>, <&dmac1 0x28>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifa3: serial@e6c70000 {
+			compatible = "renesas,scifa-r8a7745",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c70000 0 0x40>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1106>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+			       <&dmac1 0x1b>, <&dmac1 0x1c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifa4: serial@e6c78000 {
+			compatible = "renesas,scifa-r8a7745",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c78000 0 0x40>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1107>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+			       <&dmac1 0x1f>, <&dmac1 0x20>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifa5: serial@e6c80000 {
+			compatible = "renesas,scifa-r8a7745",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c80000 0 0x40>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1108>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+			       <&dmac1 0x23>, <&dmac1 0x24>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifb0: serial@e6c20000 {
+			compatible = "renesas,scifb-r8a7745",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c20000 0 0x100>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+		       <&dmac1 0x3d>, <&dmac1 0x3e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifb1: serial@e6c30000 {
+			compatible = "renesas,scifb-r8a7745",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c30000 0 0x100>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+			       <&dmac1 0x19>, <&dmac1 0x1a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifb2: serial@e6ce0000 {
+			compatible = "renesas,scifb-r8a7745",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6ce0000 0 0x100>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 216>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+			       <&dmac1 0x1d>, <&dmac1 0x1e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a7745",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 0x40>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 721>,
+				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+			       <&dmac1 0x29>, <&dmac1 0x2a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a7745",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 0x40>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 720>,
+				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+			       <&dmac1 0x2d>, <&dmac1 0x2e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e58000 {
+			compatible = "renesas,scif-r8a7745",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e58000 0 0x40>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 719>,
+				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+			       <&dmac1 0x2b>, <&dmac1 0x2c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6ea8000 {
+			compatible = "renesas,scif-r8a7745",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ea8000 0 0x40>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 718>,
+				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+			       <&dmac1 0x2f>, <&dmac1 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6ee0000 {
+			compatible = "renesas,scif-r8a7745",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ee0000 0 0x40>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 715>,
+				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+			       <&dmac1 0xfb>, <&dmac1 0xfc>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6ee8000 {
+			compatible = "renesas,scif-r8a7745",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ee8000 0 0x40>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>,
+				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+			       <&dmac1 0xfd>, <&dmac1 0xfe>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e62c0000 {
+			compatible = "renesas,hscif-r8a7745",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c0000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 717>,
+				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+			       <&dmac1 0x39>, <&dmac1 0x3a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e62c8000 {
+			compatible = "renesas,hscif-r8a7745",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c8000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>,
+				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+			       <&dmac1 0x4d>, <&dmac1 0x4e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e62d0000 {
+			compatible = "renesas,hscif-r8a7745",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62d0000 0 0x60>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 713>,
+				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+			       <&dmac1 0x3b>, <&dmac1 0x3c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		ether: ethernet@ee700000 {
+			compatible = "renesas,ether-r8a7745";
+			reg = <0 0xee700000 0 0x400>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 813>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			phy-mode = "rmii";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+	};
+
+	/* External root clock */
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	/* External USB clock - can be overridden by the board */
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+
+	/* External SCIF clock */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 3d0a18a..d0db998 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -14,8 +14,6 @@
  * kind, whether express or implied.
  */
 
-/include/ "skeleton.dtsi"
-
 #include <dt-bindings/clock/r8a7778-clock.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -23,6 +21,8 @@
 / {
 	compatible = "renesas,r8a7778";
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	cpus {
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
index 541678d..676151b 100644
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -170,7 +170,7 @@
 
 	du_pins: du {
 		du0 {
-			groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0";
+			groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0", "du0_clk_in";
 			function = "du0";
 		};
 		du1 {
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 8cf16008a..55a7c1e 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -9,8 +9,6 @@
  * kind, whether express or implied.
  */
 
-/include/ "skeleton.dtsi"
-
 #include <dt-bindings/clock/r8a7779-clock.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -19,6 +17,8 @@
 / {
 	compatible = "renesas,r8a7779";
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	cpus {
 		#address-cells = <1>;
@@ -420,7 +420,7 @@
 
 	du: display@fff80000 {
 		compatible = "renesas,du-r8a7779";
-		reg = <0 0xfff80000 0 0x40000>;
+		reg = <0xfff80000 0x40000>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7779_CLK_DU>;
 		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
@@ -590,6 +590,11 @@
 		};
 	};
 
+	prr: chipid@ff000044 {
+		compatible = "renesas,prr";
+		reg = <0xff000044 4>;
+	};
+
 	rst: reset-controller@ffcc0000 {
 		compatible = "renesas,r8a7779-reset-wdt";
 		reg = <0xffcc0000 0x48>;
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 52b56fc..bd512c8 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -50,7 +50,9 @@
 	aliases {
 		serial0 = &scif0;
 		serial1 = &scifa1;
-		i2c8 = "i2cexio";
+		i2c8 = &gpioi2c1;
+		i2c10 = &i2cexio0;
+		i2c11 = &i2cexio1;
 	};
 
 	chosen {
@@ -231,12 +233,23 @@
 		};
 	};
 
+	hdmi-in {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&adv7612_in>;
+			};
+		};
+	};
+
 	hdmi-out {
 		compatible = "hdmi-connector";
 		type = "a";
 
 		port {
-			hdmi_con: endpoint {
+			hdmi_con_out: endpoint {
 				remote-endpoint = <&adv7511_out>;
 			};
 		};
@@ -254,6 +267,17 @@
 		clock-frequency = <148500000>;
 	};
 
+	gpioi2c1: i2c-8 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		status = "disabled";
+		gpios = <&gpio1 17 GPIO_ACTIVE_HIGH /* sda */
+			 &gpio1 16 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,delay-us = <5>;
+	};
+
 	/*
 	 * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only.
 	 * We use the I2C demuxer, so the desired IP core can be selected at runtime
@@ -262,11 +286,26 @@
 	 * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and
 	 * instantiate the slave device at runtime according to the documentation.
 	 * You can then communicate with the slave via IIC3.
+	 *
+	 * IIC0/I2C0 does not appear to support fallback to GPIO.
 	 */
-	i2cexio: i2c-8 {
+	i2cexio0: i2c-10 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&iic0>, <&i2c0>;
-		i2c-bus-name = "i2c-exio";
+		i2c-bus-name = "i2c-exio0";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	/*
+	 * IIC1/I2C1 is routed to EXIO connector A, pins 78 (SCL) + 80 (SDA).
+	 * This is similar to the arangement described for i2cexio0 (above)
+	 * with a fallback to GPIO also provided.
+	 */
+	i2cexio1: i2c-11 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>;
+		i2c-bus-name = "i2c-exio1";
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
@@ -392,6 +431,11 @@
 		function = "iic0";
 	};
 
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
 	iic1_pins: iic1 {
 		groups = "iic1";
 		function = "iic1";
@@ -427,6 +471,11 @@
 		function = "usb2";
 	};
 
+	vin0_pins: vin0 {
+		groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
+		function = "vin0";
+	};
+
 	vin1_pins: vin1 {
 		groups = "vin1_data8", "vin1_clk";
 		function = "vin1";
@@ -559,6 +608,7 @@
 	vqmmc-supply = <&vccq_sdhi0>;
 	cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
 	sd-uhs-sdr50;
+	sd-uhs-sdr104;
 	status = "okay";
 };
 
@@ -580,18 +630,22 @@
 
 &i2c0	{
 	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "i2c-exio";
+	pinctrl-names = "i2c-exio0";
 };
 
 &iic0	{
 	pinctrl-0 = <&iic0_pins>;
-	pinctrl-names = "i2c-exio";
+	pinctrl-names = "i2c-exio0";
+};
+
+&i2c1	{
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "i2c-exio1";
 };
 
 &iic1	{
-	status = "okay";
 	pinctrl-0 = <&iic1_pins>;
-	pinctrl-names = "default";
+	pinctrl-names = "i2c-exio1";
 };
 
 &iic2	{
@@ -646,7 +700,34 @@
 			port@1 {
 				reg = <1>;
 				adv7511_out: endpoint {
-					remote-endpoint = <&hdmi_con>;
+					remote-endpoint = <&hdmi_con_out>;
+				};
+			};
+		};
+	};
+
+	hdmi-in@4c {
+		compatible = "adi,adv7612";
+		reg = <0x4c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		default-input = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7612_in: endpoint {
+					remote-endpoint = <&hdmi_con_in>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				adv7612_out: endpoint {
+					remote-endpoint = <&vin0ep2>;
 				};
 			};
 		};
@@ -722,6 +803,25 @@
 	status = "okay";
 };
 
+/* HDMI video input */
+&vin0 {
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	port {
+		vin0ep2: endpoint {
+			remote-endpoint = <&adv7612_out>;
+			bus-width = <24>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			pclk-sample = <1>;
+			data-active = <1>;
+		};
+	};
+};
+
 /* composite video input */
 &vin1 {
 	pinctrl-0 = <&vin1_pins>;
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 3f10b0b..0c8900d 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -711,7 +711,7 @@
 	scifb0: serial@e6c20000 {
 		compatible = "renesas,scifb-r8a7790",
 			     "renesas,rcar-gen2-scifb", "renesas,scifb";
-		reg = <0 0xe6c20000 0 64>;
+		reg = <0 0xe6c20000 0 0x100>;
 		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>;
 		clock-names = "fck";
@@ -725,7 +725,7 @@
 	scifb1: serial@e6c30000 {
 		compatible = "renesas,scifb-r8a7790",
 			     "renesas,rcar-gen2-scifb", "renesas,scifb";
-		reg = <0 0xe6c30000 0 64>;
+		reg = <0 0xe6c30000 0 0x100>;
 		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>;
 		clock-names = "fck";
@@ -739,7 +739,7 @@
 	scifb2: serial@e6ce0000 {
 		compatible = "renesas,scifb-r8a7790",
 			     "renesas,rcar-gen2-scifb", "renesas,scifb";
-		reg = <0 0xe6ce0000 0 64>;
+		reg = <0 0xe6ce0000 0 0x100>;
 		interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>;
 		clock-names = "fck";
@@ -1471,6 +1471,11 @@
 		};
 	};
 
+	prr: chipid@ff000044 {
+		compatible = "renesas,prr";
+		reg = <0 0xff000044 0 4>;
+	};
+
 	rst: reset-controller@e6160000 {
 		compatible = "renesas,r8a7790-rst";
 		reg = <0 0xe6160000 0 0x0100>;
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index f8a7d09..5405d33 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -50,6 +50,8 @@
 	aliases {
 		serial0 = &scif0;
 		serial1 = &scif1;
+		i2c9 = &gpioi2c1;
+		i2c12 = &i2cexio1;
 	};
 
 	chosen {
@@ -265,12 +267,23 @@
 		};
 	};
 
+	hdmi-in {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&adv7612_in>;
+			};
+		};
+	};
+
 	hdmi-out {
 		compatible = "hdmi-connector";
 		type = "a";
 
 		port {
-			hdmi_con: endpoint {
+			hdmi_con_out: endpoint {
 				remote-endpoint = <&adv7511_out>;
 			};
 		};
@@ -287,6 +300,29 @@
 		#clock-cells = <0>;
 		clock-frequency = <148500000>;
 	};
+
+	gpioi2c1: i2c-9 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		status = "disabled";
+		gpios = <&gpio7 16 GPIO_ACTIVE_HIGH /* sda */
+			 &gpio7 15 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,delay-us = <5>;
+	};
+
+	/*
+	 * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
+	 * A fallback to GPIO is provided.
+	 */
+	i2cexio1: i2c-12 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&i2c1>, <&gpioi2c1>;
+		i2c-bus-name = "i2c-exio1";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
 };
 
 &du {
@@ -322,6 +358,11 @@
 	pinctrl-0 = <&scif_clk_pins>;
 	pinctrl-names = "default";
 
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
 	i2c2_pins: i2c2 {
 		groups = "i2c2";
 		function = "i2c2";
@@ -360,16 +401,37 @@
 	sdhi0_pins: sd0 {
 		groups = "sdhi0_data4", "sdhi0_ctrl";
 		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
 	};
 
 	sdhi1_pins: sd1 {
 		groups = "sdhi1_data4", "sdhi1_ctrl";
 		function = "sdhi1";
+		power-source = <3300>;
+	};
+
+	sdhi1_pins_uhs: sd1_uhs {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <1800>;
 	};
 
 	sdhi2_pins: sd2 {
 		groups = "sdhi2_data4", "sdhi2_ctrl";
 		function = "sdhi2";
+		power-source = <3300>;
+	};
+
+	sdhi2_pins_uhs: sd2_uhs {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <1800>;
 	};
 
 	qspi_pins: qspi {
@@ -393,6 +455,11 @@
 		function = "usb1";
 	};
 
+	vin0_pins: vin0 {
+		groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
+		function = "vin0";
+	};
+
 	vin1_pins: vin1 {
 		groups = "vin1_data8", "vin1_clk";
 		function = "vin1";
@@ -454,33 +521,40 @@
 
 &sdhi0 {
 	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
 
 	vmmc-supply = <&vcc_sdhi0>;
 	vqmmc-supply = <&vccq_sdhi0>;
 	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
 	status = "okay";
 };
 
 &sdhi1 {
 	pinctrl-0 = <&sdhi1_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdhi1_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
 
 	vmmc-supply = <&vcc_sdhi1>;
 	vqmmc-supply = <&vccq_sdhi1>;
 	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+	sd-uhs-sdr50;
 	status = "okay";
 };
 
 &sdhi2 {
 	pinctrl-0 = <&sdhi2_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdhi2_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
 
 	vmmc-supply = <&vcc_sdhi2>;
 	vqmmc-supply = <&vccq_sdhi2>;
 	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
+	sd-uhs-sdr50;
 	status = "okay";
 };
 
@@ -538,6 +612,11 @@
 	};
 };
 
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "i2c-exio1";
+};
+
 &i2c2 {
 	pinctrl-0 = <&i2c2_pins>;
 	pinctrl-names = "default";
@@ -590,7 +669,34 @@
 			port@1 {
 				reg = <1>;
 				adv7511_out: endpoint {
-					remote-endpoint = <&hdmi_con>;
+					remote-endpoint = <&hdmi_con_out>;
+				};
+			};
+		};
+	};
+
+	hdmi-in@4c {
+		compatible = "adi,adv7612";
+		reg = <0x4c>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		default-input = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7612_in: endpoint {
+					remote-endpoint = <&hdmi_con_in>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				adv7612_out: endpoint {
+					remote-endpoint = <&vin0ep2>;
 				};
 			};
 		};
@@ -672,6 +778,27 @@
 	cpu0-supply = <&vdd_dvfs>;
 };
 
+/* HDMI video input */
+&vin0 {
+	status = "okay";
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin0ep2: endpoint {
+			remote-endpoint = <&adv7612_out>;
+			bus-width = <24>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			pclk-sample = <1>;
+			data-active = <1>;
+		};
+	};
+};
+
 /* composite video input */
 &vin1 {
 	status = "okay";
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index c465c79..8721466 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -584,6 +584,7 @@
 		dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
 		       <&dmac1 0xcd>, <&dmac1 0xce>;
 		dma-names = "tx", "rx", "tx", "rx";
+		max-frequency = <195000000>;
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -596,6 +597,7 @@
 		dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
 		       <&dmac1 0xc1>, <&dmac1 0xc2>;
 		dma-names = "tx", "rx", "tx", "rx";
+		max-frequency = <97500000>;
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -608,6 +610,7 @@
 		dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
 		       <&dmac1 0xd3>, <&dmac1 0xd4>;
 		dma-names = "tx", "rx", "tx", "rx";
+		max-frequency = <97500000>;
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -699,7 +702,7 @@
 	scifb0: serial@e6c20000 {
 		compatible = "renesas,scifb-r8a7791",
 			     "renesas,rcar-gen2-scifb", "renesas,scifb";
-		reg = <0 0xe6c20000 0 64>;
+		reg = <0 0xe6c20000 0 0x100>;
 		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>;
 		clock-names = "fck";
@@ -713,7 +716,7 @@
 	scifb1: serial@e6c30000 {
 		compatible = "renesas,scifb-r8a7791",
 			     "renesas,rcar-gen2-scifb", "renesas,scifb";
-		reg = <0 0xe6c30000 0 64>;
+		reg = <0 0xe6c30000 0 0x100>;
 		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>;
 		clock-names = "fck";
@@ -727,7 +730,7 @@
 	scifb2: serial@e6ce0000 {
 		compatible = "renesas,scifb-r8a7791",
 			     "renesas,rcar-gen2-scifb", "renesas,scifb";
-		reg = <0 0xe6ce0000 0 64>;
+		reg = <0 0xe6ce0000 0 0x100>;
 		interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>;
 		clock-names = "fck";
@@ -1487,6 +1490,11 @@
 		reg = <0 0xe6160000 0 0x0100>;
 	};
 
+	prr: chipid@ff000044 {
+		compatible = "renesas,prr";
+		reg = <0 0xff000044 0 4>;
+	};
+
 	sysc: system-controller@e6180000 {
 		compatible = "renesas,r8a7791-sysc";
 		reg = <0 0xe6180000 0 0x0200>;
diff --git a/arch/arm/boot/dts/r8a7792-wheat.dts b/arch/arm/boot/dts/r8a7792-wheat.dts
index 6dbb941..c24f26f 100644
--- a/arch/arm/boot/dts/r8a7792-wheat.dts
+++ b/arch/arm/boot/dts/r8a7792-wheat.dts
@@ -86,6 +86,34 @@
 		gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	hdmi-out0 {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con0: endpoint {
+				remote-endpoint = <&adv7513_0_out>;
+			};
+		};
+	};
+
+	hdmi-out1 {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con1: endpoint {
+				remote-endpoint = <&adv7513_1_out>;
+			};
+		};
+	};
+
+	osc2_clk: osc2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
 };
 
 &extal_clk {
@@ -128,6 +156,16 @@
 		groups = "qspi_ctrl", "qspi_data4";
 		function = "qspi";
 	};
+
+	du0_pins: du0 {
+		groups = "du0_rgb888", "du0_sync", "du0_disp";
+		function = "du0";
+	};
+
+	du1_pins: du1 {
+		groups = "du1_rgb666", "du1_sync", "du1_disp";
+		function = "du1";
+	};
 };
 
 &scif0 {
@@ -197,3 +235,91 @@
 		};
 	};
 };
+
+&i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	hdmi@3d {
+		compatible = "adi,adv7513";
+		reg = <0x3d>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7513_0_in: endpoint {
+					remote-endpoint = <&du_out_rgb0>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7513_0_out: endpoint {
+					remote-endpoint = <&hdmi_con0>;
+				};
+			};
+		};
+	};
+
+	hdmi@39 {
+		compatible = "adi,adv7513";
+		reg = <0x39>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7513_1_in: endpoint {
+					remote-endpoint = <&du_out_rgb1>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7513_1_out: endpoint {
+					remote-endpoint = <&hdmi_con1>;
+				};
+			};
+		};
+	};
+};
+
+&du {
+	pinctrl-0 = <&du0_pins &du1_pins>;
+	pinctrl-names = "default";
+
+	clocks = <&mstp7_clks R8A7792_CLK_DU0>, <&mstp7_clks R8A7792_CLK_DU1>,
+		 <&osc2_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0";
+	status = "okay";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7513_0_in>;
+			};
+		};
+		port@1 {
+			endpoint {
+				remote-endpoint = <&adv7513_1_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index 6e1f61f6..6ced3c1 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -26,6 +26,8 @@
 		i2c4 = &i2c4;
 		i2c5 = &i2c5;
 		spi0 = &qspi;
+		spi1 = &msiof0;
+		spi2 = &msiof1;
 		vin0 = &vin0;
 		vin1 = &vin1;
 		vin2 = &vin2;
@@ -123,6 +125,11 @@
 			reg = <0 0xe6160000 0 0x0100>;
 		};
 
+		prr: chipid@ff000044 {
+			compatible = "renesas,prr";
+			reg = <0 0xff000044 0 4>;
+		};
+
 		sysc: system-controller@e6180000 {
 			compatible = "renesas,r8a7792-sysc";
 			reg = <0 0xe6180000 0 0x0200>;
@@ -577,6 +584,34 @@
 			status = "disabled";
 		};
 
+		msiof0: spi@e6e20000 {
+			compatible = "renesas,msiof-r8a7792";
+			reg = <0 0xe6e20000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp0_clks R8A7792_CLK_MSIOF0>;
+			dmas = <&dmac0 0x51>, <&dmac0 0x52>,
+			       <&dmac1 0x51>, <&dmac1 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6e10000 {
+			compatible = "renesas,msiof-r8a7792";
+			reg = <0 0xe6e10000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp2_clks R8A7792_CLK_MSIOF1>;
+			dmas = <&dmac0 0x55>, <&dmac0 0x56>,
+			       <&dmac1 0x55>, <&dmac1 0x56>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		du: display@feb00000 {
 			compatible = "renesas,du-r8a7792";
 			reg = <0 0xfeb00000 0 0x40000>;
@@ -768,6 +803,13 @@
 			clock-div = <48>;
 			clock-mult = <1>;
 		};
+		mp_clk: mp {
+			compatible = "fixed-factor-clock";
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-div = <15>;
+			clock-mult = <1>;
+		};
 		m2_clk: m2 {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
@@ -798,6 +840,15 @@
 		};
 
 		/* Gate clocks */
+		mstp0_clks: mstp0_clks@e6150130 {
+			compatible = "renesas,r8a7792-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>;
+			clocks = <&mp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <R8A7792_CLK_MSIOF0>;
+			clock-output-names = "msiof0";
+		};
 		mstp1_clks: mstp1_clks@e6150134 {
 			compatible = "renesas,r8a7792-mstp-clocks",
 				     "renesas,cpg-mstp-clocks";
@@ -816,12 +867,13 @@
 			compatible = "renesas,r8a7792-mstp-clocks",
 				     "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
-			clocks = <&zs_clk>, <&zs_clk>;
+			clocks = <&mp_clk>, <&zs_clk>, <&zs_clk>;
 			#clock-cells = <1>;
 			clock-indices = <
+				R8A7792_CLK_MSIOF1
 				R8A7792_CLK_SYS_DMAC1 R8A7792_CLK_SYS_DMAC0
 			>;
-			clock-output-names = "sys-dmac1", "sys-dmac0";
+			clock-output-names = "msiof1", "sys-dmac1", "sys-dmac0";
 		};
 		mstp3_clks: mstp3_clks@e615013c {
 			compatible = "renesas,r8a7792-mstp-clocks",
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 90af186..dc311eb 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -346,18 +346,18 @@
 	};
 
 	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
-		renesas,function = "sdhi0";
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
 	};
 
 	sdhi1_pins: sd1 {
-		renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
-		renesas,function = "sdhi1";
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
 	};
 
 	sdhi2_pins: sd2 {
-		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
-		renesas,function = "sdhi2";
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
 	};
 
 	qspi_pins: qspi {
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index e4b385e..2fb527c 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -666,7 +666,7 @@
 	scifb0: serial@e6c20000 {
 		compatible = "renesas,scifb-r8a7793",
 			     "renesas,rcar-gen2-scifb", "renesas,scifb";
-		reg = <0 0xe6c20000 0 64>;
+		reg = <0 0xe6c20000 0 0x100>;
 		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7793_CLK_SCIFB0>;
 		clock-names = "fck";
@@ -680,7 +680,7 @@
 	scifb1: serial@e6c30000 {
 		compatible = "renesas,scifb-r8a7793",
 			     "renesas,rcar-gen2-scifb", "renesas,scifb";
-		reg = <0 0xe6c30000 0 64>;
+		reg = <0 0xe6c30000 0 0x100>;
 		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7793_CLK_SCIFB1>;
 		clock-names = "fck";
@@ -694,7 +694,7 @@
 	scifb2: serial@e6ce0000 {
 		compatible = "renesas,scifb-r8a7793",
 			     "renesas,rcar-gen2-scifb", "renesas,scifb";
-		reg = <0 0xe6ce0000 0 64>;
+		reg = <0 0xe6ce0000 0 0x100>;
 		interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7793_CLK_SCIFB2>;
 		clock-names = "fck";
@@ -852,6 +852,33 @@
 		status = "disabled";
 	};
 
+	vin0: video@e6ef0000 {
+		compatible = "renesas,vin-r8a7793", "renesas,rcar-gen2-vin";
+		reg = <0 0xe6ef0000 0 0x1000>;
+		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7793_CLK_VIN0>;
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	vin1: video@e6ef1000 {
+		compatible = "renesas,vin-r8a7793", "renesas,rcar-gen2-vin";
+		reg = <0 0xe6ef1000 0 0x1000>;
+		interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7793_CLK_VIN1>;
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	vin2: video@e6ef2000 {
+		compatible = "renesas,vin-r8a7793", "renesas,rcar-gen2-vin";
+		reg = <0 0xe6ef2000 0 0x1000>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7793_CLK_VIN2>;
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
 	qspi: spi@e6b10000 {
 		compatible = "renesas,qspi-r8a7793", "renesas,qspi";
 		reg = <0 0xe6b10000 0 0x2c>;
@@ -1284,6 +1311,11 @@
 		reg = <0 0xe6160000 0 0x0100>;
 	};
 
+	prr: chipid@ff000044 {
+		compatible = "renesas,prr";
+		reg = <0 0xff000044 0 4>;
+	};
+
 	sysc: system-controller@e6180000 {
 		compatible = "renesas,r8a7793-sysc";
 		reg = <0 0xe6180000 0 0x0200>;
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index 8d1b35a..569e3f0 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -18,6 +18,8 @@
 
 	aliases {
 		serial0 = &scif2;
+		i2c10 = &gpioi2c4;
+		i2c12 = &i2cexio4;
 	};
 
 	chosen {
@@ -135,6 +137,29 @@
 		#clock-cells = <0>;
 		clock-frequency = <148500000>;
 	};
+
+	gpioi2c4: i2c-10 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		status = "disabled";
+		gpios = <&gpio4 9 GPIO_ACTIVE_HIGH /* sda */
+			 &gpio4 8 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,delay-us = <5>;
+	};
+
+	/*
+	 * I2C4 is routed to EXIO connector B, pins 73 (SCL) + 74 (SDA).
+	 * A fallback to GPIO is provided.
+	 */
+	i2cexio4: i2c-14 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&i2c4>, <&gpioi2c4>;
+		i2c-bus-name = "i2c-exio4";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
 };
 
 &du {
@@ -165,8 +190,8 @@
 	pinctrl-names = "default";
 
 	du_pins: du {
-		groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_dotclkout0";
-		function = "du";
+		groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
+		function = "du1";
 	};
 
 	scif2_pins: scif2 {
@@ -194,6 +219,11 @@
 		function = "i2c1";
 	};
 
+	i2c4_pins: i2c4 {
+		groups = "i2c4";
+		function = "i2c4";
+	};
+
 	vin0_pins: vin0 {
 		groups = "vin0_data8", "vin0_clk";
 		function = "vin0";
@@ -207,11 +237,25 @@
 	sdhi0_pins: sd0 {
 		groups = "sdhi0_data4", "sdhi0_ctrl";
 		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
 	};
 
 	sdhi1_pins: sd1 {
 		groups = "sdhi1_data4", "sdhi1_ctrl";
 		function = "sdhi1";
+		power-source = <3300>;
+	};
+
+	sdhi1_pins_uhs: sd1_uhs {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <1800>;
 	};
 };
 
@@ -255,23 +299,28 @@
 
 &sdhi0 {
 	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
 
 	vmmc-supply = <&vcc_sdhi0>;
 	vqmmc-supply = <&vccq_sdhi0>;
 	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
 	status = "okay";
 };
 
 &sdhi1 {
 	pinctrl-0 = <&sdhi1_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdhi1_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
 
 	vmmc-supply = <&vcc_sdhi1>;
 	vqmmc-supply = <&vccq_sdhi1>;
 	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+	sd-uhs-sdr50;
 	status = "okay";
 };
 
@@ -296,6 +345,11 @@
 	};
 };
 
+&i2c4 {
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-names = "i2c-exio4";
+};
+
 &vin0 {
 	status = "okay";
 	pinctrl-0 = <&vin0_pins>;
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 69e4f4fa..fb576db 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -319,7 +319,7 @@
 				  "ch12";
 		clocks = <&mstp5_clks R8A7794_CLK_AUDIO_DMAC0>;
 		clock-names = "fck";
-		power-domains = <&cpg_clocks>;
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		#dma-cells = <1>;
 		dma-channels = <13>;
 	};
@@ -411,7 +411,7 @@
 	scifb0: serial@e6c20000 {
 		compatible = "renesas,scifb-r8a7794",
 			     "renesas,rcar-gen2-scifb", "renesas,scifb";
-		reg = <0 0xe6c20000 0 64>;
+		reg = <0 0xe6c20000 0 0x100>;
 		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>;
 		clock-names = "fck";
@@ -425,7 +425,7 @@
 	scifb1: serial@e6c30000 {
 		compatible = "renesas,scifb-r8a7794",
 			     "renesas,rcar-gen2-scifb", "renesas,scifb";
-		reg = <0 0xe6c30000 0 64>;
+		reg = <0 0xe6c30000 0 0x100>;
 		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>;
 		clock-names = "fck";
@@ -439,7 +439,7 @@
 	scifb2: serial@e6ce0000 {
 		compatible = "renesas,scifb-r8a7794",
 			     "renesas,rcar-gen2-scifb", "renesas,scifb";
-		reg = <0 0xe6ce0000 0 64>;
+		reg = <0 0xe6ce0000 0 0x100>;
 		interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>;
 		clock-names = "fck";
@@ -731,6 +731,7 @@
 		dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
 		       <&dmac1 0xcd>, <&dmac1 0xce>;
 		dma-names = "tx", "rx", "tx", "rx";
+		max-frequency = <195000000>;
 		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -743,6 +744,7 @@
 		dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
 		       <&dmac1 0xc1>, <&dmac1 0xc2>;
 		dma-names = "tx", "rx", "tx", "rx";
+		max-frequency = <97500000>;
 		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -755,6 +757,7 @@
 		dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
 		       <&dmac1 0xd3>, <&dmac1 0xd4>;
 		dma-names = "tx", "rx", "tx", "rx";
+		max-frequency = <97500000>;
 		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -1025,8 +1028,7 @@
 			clocks = <&extal_clk &usb_extal_clk>;
 			#clock-cells = <1>;
 			clock-output-names = "main", "pll0", "pll1", "pll3",
-					     "lb", "qspi", "sdh", "sd0", "z",
-					     "rcan";
+					     "lb", "qspi", "sdh", "sd0", "rcan";
 			#power-domain-cells = <0>;
 		};
 		/* Variable factor clocks */
@@ -1260,7 +1262,7 @@
 		mstp7_clks: mstp7_clks@e615014c {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
-			clocks = <&mp_clk>, <&mp_clk>,
+			clocks = <&mp_clk>, <&hp_clk>,
 				 <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
 				 <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
 				 <&zx_clk>;
@@ -1380,6 +1382,11 @@
 		reg = <0 0xe6160000 0 0x0100>;
 	};
 
+	prr: chipid@ff000044 {
+		compatible = "renesas,prr";
+		reg = <0 0xff000044 0 4>;
+	};
+
 	sysc: system-controller@e6180000 {
 		compatible = "renesas,r8a7794-sysc";
 		reg = <0 0xe6180000 0 0x0200>;
@@ -1488,67 +1495,67 @@
 			      "mix.0", "mix.1",
 			      "dvc.0", "dvc.1",
 			      "clk_a", "clk_b", "clk_c", "clk_i";
-		power-domains = <&cpg_clocks>;
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 
 		status = "disabled";
 
 		rcar_sound,dvc {
-			dvc0: dvc@0 {
+			dvc0: dvc-0 {
 				dmas = <&audma0 0xbc>;
 				dma-names = "tx";
 			};
-			dvc1: dvc@1 {
+			dvc1: dvc-1 {
 				dmas = <&audma0 0xbe>;
 				dma-names = "tx";
 			};
 		};
 
 		rcar_sound,mix {
-			mix0: mix@0 { };
-			mix1: mix@1 { };
+			mix0: mix-0 { };
+			mix1: mix-1 { };
 		};
 
 		rcar_sound,ctu {
-			ctu00: ctu@0 { };
-			ctu01: ctu@1 { };
-			ctu02: ctu@2 { };
-			ctu03: ctu@3 { };
-			ctu10: ctu@4 { };
-			ctu11: ctu@5 { };
-			ctu12: ctu@6 { };
-			ctu13: ctu@7 { };
+			ctu00: ctu-0 { };
+			ctu01: ctu-1 { };
+			ctu02: ctu-2 { };
+			ctu03: ctu-3 { };
+			ctu10: ctu-4 { };
+			ctu11: ctu-5 { };
+			ctu12: ctu-6 { };
+			ctu13: ctu-7 { };
 		};
 
 		rcar_sound,src {
-			src@0 {
+			src-0 {
 				status = "disabled";
 			};
-			src1: src@1 {
+			src1: src-1 {
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x87>, <&audma0 0x9c>;
 				dma-names = "rx", "tx";
 			};
-			src2: src@2 {
+			src2: src-2 {
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x89>, <&audma0 0x9e>;
 				dma-names = "rx", "tx";
 			};
-			src3: src@3 {
+			src3: src-3 {
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x8b>, <&audma0 0xa0>;
 				dma-names = "rx", "tx";
 			};
-			src4: src@4 {
+			src4: src-4 {
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x8d>, <&audma0 0xb0>;
 				dma-names = "rx", "tx";
 			};
-			src5: src@5 {
+			src5: src-5 {
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x8f>, <&audma0 0xb2>;
 				dma-names = "rx", "tx";
 			};
-			src6: src@6 {
+			src6: src-6 {
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x91>, <&audma0 0xb4>;
 				dma-names = "rx", "tx";
@@ -1556,61 +1563,61 @@
 		};
 
 		rcar_sound,ssi {
-			ssi0: ssi@0 {
+			ssi0: ssi-0 {
 				interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x01>, <&audma0 0x02>,
 				       <&audma0 0x15>, <&audma0 0x16>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi1: ssi@1 {
+			ssi1: ssi-1 {
 				interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x03>, <&audma0 0x04>,
 				       <&audma0 0x49>, <&audma0 0x4a>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi2: ssi@2 {
+			ssi2: ssi-2 {
 				interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x05>, <&audma0 0x06>,
 				       <&audma0 0x63>, <&audma0 0x64>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi3: ssi@3 {
+			ssi3: ssi-3 {
 				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x07>, <&audma0 0x08>,
 				       <&audma0 0x6f>, <&audma0 0x70>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi4: ssi@4 {
+			ssi4: ssi-4 {
 				interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x09>, <&audma0 0x0a>,
 				       <&audma0 0x71>, <&audma0 0x72>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi5: ssi@5 {
+			ssi5: ssi-5 {
 				interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x0b>, <&audma0 0x0c>,
 				       <&audma0 0x73>, <&audma0 0x74>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi6: ssi@6 {
+			ssi6: ssi-6 {
 				interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x0d>, <&audma0 0x0e>,
 				       <&audma0 0x75>, <&audma0 0x76>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi7: ssi@7 {
+			ssi7: ssi-7 {
 				interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x0f>, <&audma0 0x10>,
 				       <&audma0 0x79>, <&audma0 0x7a>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi8: ssi@8 {
+			ssi8: ssi-8 {
 				interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x11>, <&audma0 0x12>,
 				       <&audma0 0x7b>, <&audma0 0x7c>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi9: ssi@9 {
+			ssi9: ssi-9 {
 				interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x13>, <&audma0 0x14>,
 				       <&audma0 0x7d>, <&audma0 0x7e>;
diff --git a/arch/arm/boot/dts/rk1108-evb.dts b/arch/arm/boot/dts/rk1108-evb.dts
new file mode 100644
index 0000000..3956cff
--- /dev/null
+++ b/arch/arm/boot/dts/rk1108-evb.dts
@@ -0,0 +1,69 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk1108.dtsi"
+
+/ {
+	model = "Rockchip RK1108 Evaluation board";
+	compatible = "rockchip,rk1108-evb", "rockchip,rk1108";
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x08000000>;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk1108.dtsi b/arch/arm/boot/dts/rk1108.dtsi
new file mode 100644
index 0000000..d770023
--- /dev/null
+++ b/arch/arm/boot/dts/rk1108.dtsi
@@ -0,0 +1,452 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/rk1108-cru.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	compatible = "rockchip,rk1108";
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@f00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <24000000>;
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	amba {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pdma: pdma@102a0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x102a0000 0x4000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
+			clocks = <&cru ACLK_DMAC>;
+			clock-names = "apb_pclk";
+		};
+	};
+
+	bus_intmem@10080000 {
+		compatible = "mmio-sram";
+		reg = <0x10080000 0x2000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x10080000 0x2000>;
+	};
+
+	uart2: serial@10210000 {
+		compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart";
+		reg = <0x10210000 0x100>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2m0_xfer>;
+		status = "disabled";
+	};
+
+	uart1: serial@10220000 {
+		compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart";
+		reg = <0x10220000 0x100>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer>;
+		status = "disabled";
+	};
+
+	uart0: serial@10230000 {
+		compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart";
+		reg = <0x10230000 0x100>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+		status = "disabled";
+	};
+
+	grf: syscon@10300000 {
+		compatible = "rockchip,rk1108-grf", "syscon";
+		reg = <0x10300000 0x1000>;
+	};
+
+	pmugrf: syscon@20060000 {
+		compatible = "rockchip,rk1108-pmugrf", "syscon";
+		reg = <0x20060000 0x1000>;
+	};
+
+	cru: clock-controller@20200000 {
+		compatible = "rockchip,rk1108-cru";
+		reg = <0x20200000 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	emmc: dwmmc@30110000 {
+		compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc";
+		clock-freq-min-max = <400000 150000000>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x30110000 0x4000>;
+		status = "disabled";
+	};
+
+	sdio: dwmmc@30120000 {
+		compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc";
+		clock-freq-min-max = <400000 150000000>;
+		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x30120000 0x4000>;
+		status = "disabled";
+	};
+
+	sdmmc: dwmmc@30130000 {
+		compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc";
+		clock-freq-min-max = <400000 100000000>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x30130000 0x4000>;
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@32010000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+
+		reg = <0x32011000 0x1000>,
+		      <0x32012000 0x1000>,
+		      <0x32014000 0x2000>,
+		      <0x32016000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk1108-pinctrl";
+		rockchip,grf = <&grf>;
+		rockchip,pmu = <&pmugrf>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio0@20030000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20030000 0x100>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&xin24m>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1@10310000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x10310000 0x100>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&xin24m>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2@10320000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x10320000 0x100>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&xin24m>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio3@10330000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x10330000 0x100>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&xin24m>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_none_drv_12ma: pcfg-pull-none-drv-12ma {
+			drive-strength = <12>;
+		};
+
+		pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+			bias-pull-up;
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_none_drv_4ma: pcfg-pull-none-drv-4ma {
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_up_drv_4ma: pcfg-pull-up-drv-4ma {
+			bias-pull-up;
+			drive-strength = <4>;
+		};
+
+		pcfg_output_high: pcfg-output-high {
+			output-high;
+		};
+
+		pcfg_output_low: pcfg-output-low {
+			output-low;
+		};
+
+		pcfg_input_high: pcfg-input-high {
+			bias-pull-up;
+			input-enable;
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_up>,
+						<2 RK_PD4 RK_FUNC_1 &pcfg_pull_up>;
+			};
+		};
+
+		i2c2m1 {
+			i2c2m1_xfer: i2c2m1-xfer {
+				rockchip,pins = <0 RK_PC2 RK_FUNC_2 &pcfg_pull_none>,
+						<0 RK_PC6 RK_FUNC_3 &pcfg_pull_none>;
+			};
+
+			i2c2m1_gpio: i2c2m1-gpio {
+				rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>,
+						<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		i2c2m05v {
+			i2c2m05v_xfer: i2c2m05v-xfer {
+				rockchip,pins = <1 RK_PD5 RK_FUNC_2 &pcfg_pull_none>,
+						<1 RK_PD4 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			i2c2m05v_gpio: i2c2m05v-gpio {
+				rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
+						<1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins = <0 RK_PB6 RK_FUNC_1 &pcfg_pull_none>,
+						<0 RK_PC4 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		sdmmc {
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins = <3 RK_PC4 RK_FUNC_1 &pcfg_pull_none_drv_4ma>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins = <3 RK_PC5 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
+			};
+
+			sdmmc_cd: sdmmc-cd {
+				rockchip,pins = <0 RK_PA1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
+			};
+
+			sdmmc_bus1: sdmmc-bus1 {
+				rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>,
+						<3 RK_PC2 RK_FUNC_1 &pcfg_pull_up_drv_4ma>,
+						<3 RK_PC1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>,
+						<3 RK_PC0 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <3 RK_PA6 RK_FUNC_1 &pcfg_pull_up>,
+						<3 RK_PA5 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <3 RK_PA4 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <3 RK_PA3 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_rts_gpio: uart0-rts-gpio {
+				rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <1 RK_PD3 RK_FUNC_1 &pcfg_pull_up>,
+						<1 RK_PD2 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins = <1 RK_PD0 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins = <1 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2m0 {
+			uart2m0_xfer: uart2m0-xfer {
+				rockchip,pins = <2 RK_PD2 RK_FUNC_1 &pcfg_pull_up>,
+						<2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2m1 {
+			uart2m1_xfer: uart2m1-xfer {
+				rockchip,pins = <3 RK_PC3 RK_FUNC_2 &pcfg_pull_up>,
+						<3 RK_PC2 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		uart2_5v {
+			uart2_5v_cts: uart2_5v-cts {
+				rockchip,pins = <1 RK_PD4 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart2_5v_rts: uart2_5v-rts {
+				rockchip,pins = <1 RK_PD5 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts
index 8db9e9b..2f5f155 100644
--- a/arch/arm/boot/dts/rk3036-evb.dts
+++ b/arch/arm/boot/dts/rk3036-evb.dts
@@ -46,7 +46,7 @@
 	model = "Rockchip RK3036 Evaluation board";
 	compatible = "rockchip,rk3036-evb", "rockchip,rk3036";
 
-	memory {
+	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x40000000>;
 	};
diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
index 1df1557..3de958e 100644
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -46,7 +46,7 @@
 	model = "Rockchip RK3036 KylinBoard";
 	compatible = "rockchip,rk3036-kylin", "rockchip,rk3036";
 
-	memory {
+	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x20000000>;
 	};
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index 7c2dc19..4ed49a2 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -44,9 +44,11 @@
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/clock/rk3036-cru.h>
 #include <dt-bindings/soc/rockchip,boot-mode.h>
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	compatible = "rockchip,rk3036";
 
 	interrupt-parent = <&gic>;
@@ -243,7 +245,7 @@
 		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x10214000 0x4000>;
 		clock-frequency = <37500000>;
-		clock-freq-min-max = <400000 37500000>;
+		max-frequency = <37500000>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
 		clock-names = "biu", "ciu";
 		fifo-depth = <0x100>;
@@ -254,7 +256,7 @@
 	sdio: dwmmc@10218000 {
 		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x10218000 0x4000>;
-		clock-freq-min-max = <400000 37500000>;
+		max-frequency = <37500000>;
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
 			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
@@ -270,7 +272,7 @@
 		bus-width = <8>;
 		cap-mmc-highspeed;
 		clock-frequency = <37500000>;
-		clock-freq-min-max = <400000 37500000>;
+		max-frequency = <37500000>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index bc674ee..c0d8b54 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -49,7 +49,7 @@
 	model = "bq Curie 2";
 	compatible = "mundoreader,bq-curie2", "rockchip,rk3066a";
 
-	memory {
+	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x40000000>;
 	};
diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts
index a2b763e..0a54c4b 100644
--- a/arch/arm/boot/dts/rk3066a-marsboard.dts
+++ b/arch/arm/boot/dts/rk3066a-marsboard.dts
@@ -47,7 +47,7 @@
 	model = "MarsBoard RK3066";
 	compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a";
 
-	memory {
+	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x40000000>;
 	};
diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts
new file mode 100644
index 0000000..658eb7d
--- /dev/null
+++ b/arch/arm/boot/dts/rk3066a-mk808.dts
@@ -0,0 +1,195 @@
+/*
+ * Copyright (c) 2016 Paweł Jarosz <paweljarosz3691@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3066a.dtsi"
+
+/ {
+	model = "Rikomagic MK808";
+	compatible = "rikomagic,mk808", "rockchip,rk3066a";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@60000000 {
+		reg = <0x60000000 0x40000000>;
+		device_type = "memory";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "mk808:blue:power";
+			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	vcc_io: vcc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_host: usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&host_drv>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-name = "host-pwr";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_otg: usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&otg_drv>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-name = "vcc_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&sdmmc_pwr>;
+		pinctrl-names = "default";
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_wifi: sdio-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&wifi_pwr>;
+		pinctrl-names = "default";
+		regulator-name = "vcc_wifi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	num-slots = <1>;
+	vmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <4>;
+	disable-wp;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_wifi>;
+	status = "okay";
+};
+
+&pinctrl {
+	usb-host {
+		host_drv: host-drv {
+			rockchip,pins = <RK_GPIO0 6 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	usb-otg {
+		otg_drv: otg-drv {
+			rockchip,pins = <RK_GPIO0 5 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <RK_GPIO3 7 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	sdio {
+		wifi_pwr: wifi-pwr {
+			rockchip,pins = <RK_GPIO3 24 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts
index 6e7f218..82465b6 100644
--- a/arch/arm/boot/dts/rk3066a-rayeager.dts
+++ b/arch/arm/boot/dts/rk3066a-rayeager.dts
@@ -48,7 +48,7 @@
 	model = "Rayeager PX2";
 	compatible = "chipspark,rayeager-px2", "rockchip,rk3066a";
 
-	memory {
+	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x40000000>;
 	};
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 0d0dae3..e498c36 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -151,6 +151,14 @@
 
 		#clock-cells = <1>;
 		#reset-cells = <1>;
+		assigned-clocks = <&cru PLL_CPLL>, <&cru PLL_GPLL>,
+				  <&cru ACLK_CPU>, <&cru HCLK_CPU>,
+				  <&cru PCLK_CPU>, <&cru ACLK_PERI>,
+				  <&cru HCLK_PERI>, <&cru PCLK_PERI>;
+		assigned-clock-rates = <400000000>, <594000000>,
+				       <300000000>, <150000000>,
+				       <75000000>, <300000000>,
+				       <150000000>, <75000000>;
 	};
 
 	timer@2000e000 {
@@ -162,7 +170,7 @@
 	};
 
 	efuse: efuse@20010000 {
-		compatible = "rockchip,rockchip-efuse";
+		compatible = "rockchip,rk3066a-efuse";
 		reg = <0x20010000 0x4000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -197,7 +205,7 @@
 		clock-names = "saradc", "apb_pclk";
 		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 		#io-channel-cells = <1>;
-		resets = <&cru SRST_SARADC>;
+		resets = <&cru SRST_TSADC>;
 		reset-names = "saradc-apb";
 		status = "disabled";
 	};
@@ -628,15 +636,26 @@
 };
 
 &mmc0 {
+	clock-frequency = <50000000>;
+	dmas = <&dmac2 1>;
+	dma-names = "rx-tx";
+	max-frequency = <50000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
 };
 
 &mmc1 {
+	dmas = <&dmac2 3>;
+	dma-names = "rx-tx";
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
 };
 
+&emmc {
+	dmas = <&dmac2 4>;
+	dma-names = "rx-tx";
+};
+
 &pwm0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_out>;
@@ -668,21 +687,29 @@
 };
 
 &uart0 {
+	dmas = <&dmac1_s 0>, <&dmac1_s 1>;
+	dma-names = "tx", "rx";
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_xfer>;
 };
 
 &uart1 {
+	dmas = <&dmac1_s 2>, <&dmac1_s 3>;
+	dma-names = "tx", "rx";
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart1_xfer>;
 };
 
 &uart2 {
+	dmas = <&dmac2 6>, <&dmac2 7>;
+	dma-names = "tx", "rx";
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart2_xfer>;
 };
 
 &uart3 {
+	dmas = <&dmac2 8>, <&dmac2 9>;
+	dma-names = "tx", "rx";
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_xfer>;
 };
diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts
new file mode 100644
index 0000000..df727ba
--- /dev/null
+++ b/arch/arm/boot/dts/rk3188-px3-evb.dts
@@ -0,0 +1,328 @@
+/*
+ * Copyright (c) 2016 Andy Yan <andy.yan@rock-chips.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3188.dtsi"
+
+/ {
+	model = "Rockchip PX3-EVB";
+	compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@60000000 {
+		reg = <0x60000000 0x80000000>;
+		device_type = "memory";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		power {
+			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "GPIO Key Power";
+			linux,input-type = <1>;
+			wakeup-source;
+			debounce-interval = <100>;
+		};
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	accelerometer@18 {
+		compatible = "bosch,bma250";
+		reg = <0x18>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	rk808: pmic@1c {
+		compatible = "rockchip,rk818";
+		reg = <0x1c>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_io>;
+		vcc9-supply = <&vcc_io>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "vdd_arm";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_io";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_cif: LDO_REG1 {
+				 regulator-min-microvolt = <3300000>;
+				 regulator-max-microvolt = <3300000>;
+				 regulator-name = "vcc_cif";
+			};
+
+			vcc_jetta33: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_jetta33";
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd_10";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			lvds_12: LDO_REG4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "lvds_12";
+			};
+
+			lvds_25: LDO_REG5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "lvds_25";
+			};
+
+			cif_18: LDO_REG6 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "cif_18";
+			};
+
+			vcc_sd: LDO_REG7 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_sd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			wl_18: LDO_REG8 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "wl_18";
+			};
+
+			lcd_33: SWITCH_REG1 {
+				regulator-name = "lcd_33";
+			};
+		};
+	};
+
+};
+
+&i2c2 {
+	gsl1680: touchscreen@40 {
+		compatible = "silead,gsl1680";
+		reg = <0x40>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+		power-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <1280>;
+		silead,max-fingers = <5>;
+	};
+};
+
+&mmc0 {
+	num-slots = <1>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+	vmmc-supply = <&vcc_sd>;
+
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+};
+
+&pinctrl {
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index 1da46d1..5e8a235 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -48,7 +48,7 @@
 	model = "Radxa Rock";
 	compatible = "radxa,rock", "rockchip,rk3188";
 
-	memory {
+	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x80000000>;
 	};
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 31f81b2..869e189 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -147,7 +147,7 @@
 	};
 
 	efuse: efuse@20010000 {
-		compatible = "rockchip,rockchip-efuse";
+		compatible = "rockchip,rk3188-efuse";
 		reg = <0x20010000 0x4000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/rk3228-evb.dts b/arch/arm/boot/dts/rk3228-evb.dts
index 904668e..5883433 100644
--- a/arch/arm/boot/dts/rk3228-evb.dts
+++ b/arch/arm/boot/dts/rk3228-evb.dts
@@ -46,7 +46,7 @@
 	model = "Rockchip RK3228 Evaluation board";
 	compatible = "rockchip,rk3228-evb", "rockchip,rk3228";
 
-	memory {
+	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x40000000>;
 	};
diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts
index b6a1203..dcdd0ce 100644
--- a/arch/arm/boot/dts/rk3229-evb.dts
+++ b/arch/arm/boot/dts/rk3229-evb.dts
@@ -46,7 +46,7 @@
 	model = "Rockchip RK3229 Evaluation board";
 	compatible = "rockchip,rk3229-evb", "rockchip,rk3229";
 
-	memory {
+	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x40000000>;
 	};
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 9e6bf0e..9d3aee5 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -44,9 +44,11 @@
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/clock/rk3228-cru.h>
 #include <dt-bindings/thermal/thermal.h>
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	interrupt-parent = <&gic>;
 
 	aliases {
@@ -402,7 +404,7 @@
 		reg = <0x30020000 0x4000>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <37500000>;
-		clock-freq-min-max = <400000 37500000>;
+		max-frequency = <37500000>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index d59208b..bf7ccfa 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -43,7 +43,7 @@
 #include "rk3288.dtsi"
 
 / {
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x80000000>;
 	};
diff --git a/arch/arm/boot/dts/rk3288-fennec.dts b/arch/arm/boot/dts/rk3288-fennec.dts
index 2e3c341..805c0d2 100644
--- a/arch/arm/boot/dts/rk3288-fennec.dts
+++ b/arch/arm/boot/dts/rk3288-fennec.dts
@@ -46,7 +46,7 @@
 	model = "Rockchip RK3288 Fennec Board";
 	compatible = "rockchip,rk3288-fennec", "rockchip,rk3288";
 
-	memory {
+	memory@0 {
 		reg = <0x0 0x80000000>;
 		device_type = "memory";
 	};
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
index ec418c9..d242588 100644
--- a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
@@ -45,7 +45,7 @@
 #include "rk3288.dtsi"
 
 / {
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0 0x80000000>;
 	};
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index 114c90fb..44935af 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -44,7 +44,7 @@
 #include "rk3288.dtsi"
 
 / {
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0 0x80000000>;
 	};
diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts
index 2448842..441d450 100644
--- a/arch/arm/boot/dts/rk3288-miqi.dts
+++ b/arch/arm/boot/dts/rk3288-miqi.dts
@@ -52,7 +52,7 @@
 		stdout-path = "serial2:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0 0x80000000>;
 	};
diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
index 56dd377..bc6d100 100644
--- a/arch/arm/boot/dts/rk3288-popmetal.dts
+++ b/arch/arm/boot/dts/rk3288-popmetal.dts
@@ -48,7 +48,7 @@
 	model = "PopMetal-RK3288";
 	compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
 
-	memory{
+	memory@0 {
 		device_type = "memory";
 		reg = <0 0x80000000>;
 	};
@@ -68,7 +68,7 @@
 		pinctrl-0 = <&pwrbtn>;
 
 		power {
-			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
 			linux,input-type = <1>;
@@ -79,7 +79,7 @@
 
 	ir: ir-receiver {
 		compatible = "gpio-ir-receiver";
-		gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&ir_int>;
 	};
@@ -94,7 +94,7 @@
 
 	vcc_sd: sdmmc-regulator {
 		compatible = "regulator-fixed";
-		gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+		gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sdmmc_pwr>;
 		regulator-name = "vcc_sd";
@@ -128,7 +128,7 @@
 	vcc28_dvp: vcc28-dvp-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
-		gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&dvp_pwr>;
 		regulator-name = "vcc28_dvp";
@@ -147,6 +147,8 @@
 	bus-width = <8>;
 	cap-mmc-highspeed;
 	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
 	non-removable;
 	num-slots = <1>;
 	pinctrl-names = "default";
@@ -165,6 +167,10 @@
 	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
 	vmmc-supply = <&vcc_sd>;
 	vqmmc-supply = <&vccio_sd>;
 	status = "okay";
@@ -174,7 +180,7 @@
 	phy-supply = <&vcc_lan>;
 	phy-mode = "rgmii";
 	clock_in_out = "input";
-	snps,reset-gpio = <&gpio4 7 0>;
+	snps,reset-gpio = <&gpio4 RK_PB0 0>;
 	snps,reset-active-low;
 	snps,reset-delays-us = <0 10000 1000000>;
 	assigned-clocks = <&cru SCLK_MAC>;
@@ -280,7 +286,7 @@
 			vccio_sd: LDO_REG2 {
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-name = "vccio_sd";
 				regulator-state-mem {
@@ -443,43 +449,43 @@
 &pinctrl {
 	ak8963 {
 		comp_int: comp-int {
-			rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	buttons {
 		pwrbtn: pwrbtn {
-			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	dvp {
 		dvp_pwr: dvp-pwr {
-			rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	ir {
 		ir_int: ir-int {
-			rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	mma8452 {
 		gsensor_int: gsensor-int {
-			rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <8 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	pmic {
 		pmic_int: pmic-int {
-			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	sdmmc {
 		sdmmc_pwr: sdmmc-pwr {
-			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts
index 4b8a8ad..04faa72 100644
--- a/arch/arm/boot/dts/rk3288-r89.dts
+++ b/arch/arm/boot/dts/rk3288-r89.dts
@@ -48,7 +48,7 @@
 / {
 	compatible = "netxeon,r89", "rockchip,rk3288";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x80000000>;
 	};
diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
index bb1f01e..b25ba80 100644
--- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
@@ -42,7 +42,7 @@
 #include "rk3288.dtsi"
 
 / {
-	memory {
+	memory@0 {
 		reg = <0x0 0x80000000>;
 		device_type = "memory";
 	};
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 3dd2cca..2251d28 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -47,7 +47,7 @@
 #include "rk3288.dtsi"
 
 / {
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x80000000>;
 	};
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 74a749c..4fad133 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -46,9 +46,11 @@
 #include <dt-bindings/thermal/thermal.h>
 #include <dt-bindings/power/rk3288-power.h>
 #include <dt-bindings/soc/rockchip,boot-mode.h>
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	compatible = "rockchip,rk3288";
 
 	interrupt-parent = <&gic>;
@@ -227,7 +229,7 @@
 
 	sdmmc: dwmmc@ff0c0000 {
 		compatible = "rockchip,rk3288-dw-mshc";
-		clock-freq-min-max = <400000 150000000>;
+		max-frequency = <150000000>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
 			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
@@ -239,7 +241,7 @@
 
 	sdio0: dwmmc@ff0d0000 {
 		compatible = "rockchip,rk3288-dw-mshc";
-		clock-freq-min-max = <400000 150000000>;
+		max-frequency = <150000000>;
 		clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>,
 			 <&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
@@ -251,7 +253,7 @@
 
 	sdio1: dwmmc@ff0e0000 {
 		compatible = "rockchip,rk3288-dw-mshc";
-		clock-freq-min-max = <400000 150000000>;
+		max-frequency = <150000000>;
 		clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>,
 			 <&cru SCLK_SDIO1_DRV>, <&cru SCLK_SDIO1_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
@@ -263,7 +265,7 @@
 
 	emmc: dwmmc@ff0f0000 {
 		compatible = "rockchip,rk3288-dw-mshc";
-		clock-freq-min-max = <400000 150000000>;
+		max-frequency = <150000000>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
@@ -1115,7 +1117,7 @@
 	};
 
 	efuse: efuse@ffb40000 {
-		compatible = "rockchip,rockchip-efuse";
+		compatible = "rockchip,rk3288-efuse";
 		reg = <0xffb40000 0x20>;
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 8fbd3c8..0b45811 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -44,9 +44,11 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/soc/rockchip,boot-mode.h>
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	interrupt-parent = <&gic>;
 
 	aliases {
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 7173ec9..ceb9783 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -735,6 +735,11 @@
 						atmel,clk-output-range = <0 83000000>;
 					};
 
+					securam_clk: securam_clk {
+						#clock-cells = <0>;
+						reg = <51>;
+					};
+
 					i2s0_clk: i2s0_clk {
 						#clock-cells = <0>;
 						reg = <54>;
@@ -1030,6 +1035,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&twi0_clk>;
+				atmel,fifo-size = <16>;
 				status = "disabled";
 			};
 
@@ -1058,6 +1064,15 @@
 				status = "disabled";
 			};
 
+			securam: sram@f8044000 {
+				compatible = "atmel,sama5d2-securam", "mmio-sram";
+				reg = <0xf8044000 0x1420>;
+				clocks = <&securam_clk>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0xf8044000 0x1420>;
+			};
+
 			rstc@f8048000 {
 				compatible = "atmel,sama5d3-rstc";
 				reg = <0xf8048000 0x10>;
@@ -1088,30 +1103,12 @@
 				status = "disabled";
 			};
 
-			sckc@f8048050 {
-				compatible = "atmel,at91sam9x5-sckc";
+			clk32k: sckc@f8048050 {
+				compatible = "atmel,sama5d4-sckc";
 				reg = <0xf8048050 0x4>;
 
-				slow_rc_osc: slow_rc_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
-					#clock-cells = <0>;
-					clock-frequency = <32768>;
-					clock-accuracy = <250000000>;
-					atmel,startup-time-usec = <75>;
-				};
-
-				slow_osc: slow_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-osc";
-					#clock-cells = <0>;
-					clocks = <&slow_xtal>;
-					atmel,startup-time-usec = <1200000>;
-				};
-
-				clk32k: slowck {
-					compatible = "atmel,at91sam9x5-clk-slow";
-					#clock-cells = <0>;
-					clocks = <&slow_rc_osc &slow_osc>;
-				};
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
 			};
 
 			rtc@f80480b0 {
@@ -1231,6 +1228,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&twi1_clk>;
+				atmel,fifo-size = <16>;
 				status = "disabled";
 			};
 
@@ -1260,6 +1258,11 @@
 				clocks = <&pioA_clk>;
 			};
 
+			secumod@fc040000 {
+				compatible = "atmel,sama5d2-secumod", "syscon";
+				reg = <0xfc040000 0x100>;
+			};
+
 			tdes@fc044000 {
 				compatible = "atmel,at91sam9g46-tdes";
 				reg = <0xfc044000 0x100>;
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 4c84d33..b06448b 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -549,8 +549,8 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB30 periph A */
-							 AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PB31 periph A with pullup */
+							<AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 65e725f..4f60c1b 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -1314,30 +1314,11 @@
 				status = "disabled";
 			};
 
-			sckc@fc068650 {
-				compatible = "atmel,at91sam9x5-sckc";
+			clk32k: sckc@fc068650 {
+				compatible = "atmel,sama5d4-sckc";
 				reg = <0xfc068650 0x4>;
-
-				slow_rc_osc: slow_rc_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
-					#clock-cells = <0>;
-					clock-frequency = <32768>;
-					clock-accuracy = <250000000>;
-					atmel,startup-time-usec = <75>;
-				};
-
-				slow_osc: slow_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-osc";
-					#clock-cells = <0>;
-					clocks = <&slow_xtal>;
-					atmel,startup-time-usec = <1200000>;
-				};
-
-				clk32k: slowck {
-					compatible = "atmel,at91sam9x5-clk-slow";
-					#clock-cells = <0>;
-					clocks = <&slow_rc_osc &slow_osc>;
-				};
+				#clock-cells = <0>;
+				clocks = <&slow_xtal>;
 			};
 
 			rtc@fc0686b0 {
@@ -1461,8 +1442,8 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>,     /* conflicts with D14 and TDI */
-							<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;  /* conflicts with D15 and TDO */
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* conflicts with D14 and TDI */
+							 AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;		/* conflicts with D15 and TDO */
 					};
 				};
 
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index 032fe2f..e126759 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -8,8 +8,6 @@
  * kind, whether express or implied.
  */
 
-/include/ "skeleton.dtsi"
-
 #include <dt-bindings/clock/sh73a0-clock.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -17,6 +15,8 @@
 / {
 	compatible = "renesas,sh73a0";
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	cpus {
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 9f48141..da68965 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -686,6 +686,12 @@
 			arm,data-latency = <2 1 1>;
 			prefetch-data = <1>;
 			prefetch-instr = <1>;
+			arm,shared-override;
+			arm,double-linefill = <1>;
+			arm,double-linefill-incr = <0>;
+			arm,double-linefill-wrap = <1>;
+			arm,prefetch-drop = <0>;
+			arm,prefetch-offset = <7>;
 		};
 
 		mmc: dwmmc0@ff704000 {
@@ -700,11 +706,38 @@
 			status = "disabled";
 		};
 
+		nand0: nand@ff900000 {
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			compatible = "denali,denali-nand-dt";
+			reg = <0xff900000 0x100000>,
+			      <0xffb80000 0x10000>;
+			reg-names = "nand_data", "denali_reg";
+			interrupts = <0x0 0x90 0x4>;
+			dma-mask = <0xffffffff>;
+			clocks = <&nand_clk>;
+			status = "disabled";
+		};
+
 		ocram: sram@ffff0000 {
 			compatible = "mmio-sram";
 			reg = <0xffff0000 0x10000>;
 		};
 
+		qspi: spi@ff705000 {
+			compatible = "cdns,qspi-nor";
+                        #address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xff705000 0x1000>,
+			      <0xffa00000 0x1000>;
+			interrupts = <0 151 4>;
+			cdns,fifo-depth = <128>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x00000000>;
+			clocks = <&qspi_clk>;
+			status = "disabled";
+		};
+
 		rst: rstmgr@ffd05000 {
 			#reset-cells = <1>;
 			compatible = "altr,rst-mgr";
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index f520cbf..551c636 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -562,6 +562,21 @@
 			status = "disabled";
 		};
 
+		spi1: spi@ffda5000 {
+			compatible = "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xffda5000 0x100>;
+			interrupts = <0 102 4>;
+			num-chipselect = <4>;
+			bus-num = <0>;
+			/*32bit_access;*/
+			tx-dma-channel = <&pdma 16>;
+			rx-dma-channel = <&pdma 17>;
+			clocks = <&spi_m_clk>;
+			status = "disabled";
+		};
+
 		sdr: sdr@ffc25000 {
 			compatible = "syscon";
 			reg = <0xffcfb100 0x80>;
@@ -573,6 +588,9 @@
 			interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
 			cache-unified;
 			cache-level = <2>;
+			prefetch-data = <1>;
+			prefetch-instr = <1>;
+			arm,shared-override;
 		};
 
 		mmc: dwmmc0@ff808000 {
@@ -657,6 +675,20 @@
 			};
 		};
 
+		qspi: spi@ff809000 {
+			compatible = "cdns,qspi-nor";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xff809000 0x100>,
+			      <0xffa00000 0x100000>;
+			interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <128>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x00000000>;
+			clocks = <&qspi_clk>;
+			status = "disabled";
+		};
+
 		rst: rstmgr@ffd05000 {
 			#reset-cells = <1>;
 			compatible = "altr,rst-mgr";
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
index 8e3a4ad..eb00ae3 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
@@ -36,6 +36,30 @@
 		reg = <0x0 0x40000000>; /* 1GB */
 	};
 
+	a10leds {
+		compatible = "gpio-leds";
+
+		a10sr_led0 {
+			label = "a10sr-led0";
+			gpios = <&a10sr_gpio 0 1>;
+		};
+
+		a10sr_led1 {
+			label = "a10sr-led1";
+			gpios = <&a10sr_gpio 1 1>;
+		};
+
+		a10sr_led2 {
+			label = "a10sr-led2";
+			gpios = <&a10sr_gpio 2 1>;
+		};
+
+		a10sr_led3 {
+			label = "a10sr-led3";
+			gpios = <&a10sr_gpio 3 1>;
+		};
+	};
+
 	soc {
 		clkmgr@ffd04000 {
 			clocks {
@@ -75,6 +99,31 @@
 	status = "okay";
 };
 
+&gpio1 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+
+	resource-manager@0 {
+		compatible = "altr,a10sr";
+		reg = <0>;
+		spi-max-frequency = <100000>;
+		/* low-level active IRQ at GPIO1_5 */
+		interrupt-parent = <&portb>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		a10sr_gpio: gpio-controller {
+			compatible = "altr,a10sr-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+};
+
 &i2c1 {
 	speed-mode = <0>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
new file mode 100644
index 0000000..beb2fc6
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2016 Intel. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+#include "socfpga_arria10_socdk.dtsi"
+
+&qspi {
+	status = "okay";
+
+	flash0: n25q00@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q00aa";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partition@qspi-boot {
+			label = "Boot and fpga data";
+			reg = <0x0 0x2720000>;
+		};
+
+		partition@qspi-rootfs {
+			label = "Root Filesystem - JFFS2";
+			reg = <0x2720000 0x58E0000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
index 3c88678..f739ead 100644
--- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
@@ -82,6 +82,39 @@
 	status = "okay";
 };
 
+&qspi {
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q256a";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partition@qspi-boot {
+			/* 8MB for raw data. */
+			label = "Flash 0 Raw Data";
+			reg = <0x0 0x800000>;
+		};
+
+		partition@qspi-rootfs {
+			/* 120MB for jffs2 data. */
+			label = "Flash 0 jffs2 Filesystem";
+			reg = <0x800000 0x7800000>;
+		};
+	};
+};
+
 &usb1 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
index afea364..5ecd2ef 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
@@ -18,7 +18,7 @@
 
 / {
 	model = "Terasic DE-0(Atlas)";
-	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+	compatible = "terasic,de0-atlas", "altr,socfpga-cyclone5", "altr,socfpga";
 
 	chosen {
 		bootargs = "earlyprintk";
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
index f86f9c0..6ad3b1e 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
+++ b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
@@ -18,7 +18,7 @@
 #include "socfpga_cyclone5.dtsi"
 
 / {
-	model = "DENX MCV";
+	model = "Aries/DENX MCV";
 	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
 
 	memory {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
index 7186a29..e5a98e5 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
@@ -18,8 +18,8 @@
 #include "socfpga_cyclone5_mcv.dtsi"
 
 / {
-	model = "DENX MCV EVK";
-	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+	model = "Aries/DENX MCV EVK";
+	compatible = "denx,mcvevk", "altr,socfpga-cyclone5", "altr,socfpga";
 
 	aliases {
 		ethernet0 = &gmac0;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
index 15e43f4..6306d00 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
@@ -19,7 +19,7 @@
 
 / {
 	model = "Altera SOCFPGA Cyclone V SoC Development Kit";
-	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+	compatible = "altr,socfpga-cyclone5-socdk", "altr,socfpga-cyclone5", "altr,socfpga";
 
 	chosen {
 		bootargs = "earlyprintk";
@@ -87,6 +87,39 @@
 	status = "okay";
 };
 
+&qspi {
+	status = "okay";
+
+	flash0: n25q00@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q00";
+		reg = <0>;	/* chip select */
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partition@qspi-boot {
+			/* 8MB for raw data. */
+			label = "Flash 0 Raw Data";
+			reg = <0x0 0x800000>;
+		};
+
+		partition@qspi-rootfs {
+			/* 120MB for jffs2 data. */
+			label = "Flash 0 jffs2 Filesystem";
+			reg = <0x800000 0x7800000>;
+		};
+	};
+};
+
 &usb1 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
index 02e22f5..a0c90b3b 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -19,7 +19,7 @@
 
 / {
 	model = "Terasic SoCkit";
-	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+	compatible = "terasic,socfpga-cyclone5-sockit", "altr,socfpga-cyclone5", "altr,socfpga";
 
 	chosen {
 		bootargs = "earlyprintk";
@@ -175,6 +175,27 @@
 	status = "okay";
 };
 
+&qspi {
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q00";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+	};
+};
+
 &usb1 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
index d798537..c3d52f2 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
@@ -80,3 +80,22 @@
 &mmc {
 	status = "okay";
 };
+
+&qspi {
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q256a";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+		m25p,fast-read;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
new file mode 100644
index 0000000..5b7e3c2
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
@@ -0,0 +1,123 @@
+/*
+ *  Copyright (C) 2016 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "socfpga_cyclone5.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Altera SOCFPGA Cyclone V SoC Macnica Sodia board";
+	compatible = "macnica,sodia", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
+	regulator_3_3v: 3-3-v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+
+		hps_led0 {
+			label = "hps:green:led0";
+			gpios = <&portb 12 GPIO_ACTIVE_LOW>;
+		};
+
+		hps_led1 {
+			label = "hps:green:led1";
+			gpios = <&portb 13 GPIO_ACTIVE_LOW>;
+		};
+
+		hps_led2 {
+			label = "hps:green:led2";
+			gpios = <&portb 14 GPIO_ACTIVE_LOW>;
+		};
+
+		hps_led3 {
+			label = "hps:green:led3";
+			gpios = <&portb 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy = <&phy0>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <3000>;
+			txen-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&mmc0 {
+	cd-gpios = <&portb 18 0>;
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
index b844473..363ee62 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
@@ -51,7 +51,7 @@
 
 / {
 	model = "samtec VIN|ING FPGA";
-	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+	compatible = "samtec,vining", "altr,socfpga-cyclone5", "altr,socfpga";
 
 	chosen {
 		bootargs = "console=ttyS0,115200";
diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
index 13029c0..34c119a 100644
--- a/arch/arm/boot/dts/stih407-clock.dtsi
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -101,6 +101,7 @@
 				clocks = <&clk_sysin>;
 
 				clock-output-names = "clk-s-a0-pll-ofd-0";
+				clock-critical = <0>; /* clk-s-a0-pll-ofd-0 */
 			};
 
 			clk_s_a0_flexgen: clk-s-a0-flexgen {
@@ -112,6 +113,7 @@
 					 <&clk_sysin>;
 
 				clock-output-names = "clk-ic-lmi0";
+				clock-critical = <CLK_IC_LMI0>;
 			};
 		};
 
@@ -126,6 +128,7 @@
 					     "clk-s-c0-fs0-ch1",
 					     "clk-s-c0-fs0-ch2",
 					     "clk-s-c0-fs0-ch3";
+			clock-critical = <0>; /* clk-s-c0-fs0-ch0 */
 		};
 
 		clk_s_c0: clockgen-c@09103000 {
@@ -139,6 +142,7 @@
 				clocks = <&clk_sysin>;
 
 				clock-output-names = "clk-s-c0-pll0-odf-0";
+				clock-critical = <0>; /* clk-s-c0-pll0-odf-0 */
 			};
 
 			clk_s_c0_pll1: clk-s-c0-pll1 {
@@ -194,6 +198,12 @@
 						     "clk-main-disp",
 						     "clk-aux-disp",
 						     "clk-compo-dvp";
+				clock-critical = <CLK_PROC_STFE>,
+						 <CLK_ICN_CPU>,
+						 <CLK_TX_ICN_DMU>,
+						 <CLK_EXT2F_A9>,
+						 <CLK_ICN_LMI>,
+						 <CLK_ICN_SBC>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 8f79b41..c8b2944 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -916,7 +916,7 @@
 		};
 
 		sti_uni_player0: sti-uni-player@8d80000 {
-			compatible = "st,sti-uni-player";
+			compatible = "st,stih407-uni-player-hdmi";
 			#sound-dai-cells = <0>;
 			st,syscfg = <&syscfg_core>;
 			clocks = <&clk_s_d0_flexgen CLK_PCM_0>;
@@ -926,17 +926,13 @@
 			reg = <0x8d80000 0x158>;
 			interrupts = <GIC_SPI 84 IRQ_TYPE_NONE>;
 			dmas = <&fdma0 2 0 1>;
-			dai-name = "Uni Player #0 (HDMI)";
 			dma-names = "tx";
-			st,uniperiph-id = <0>;
-			st,version = <5>;
-			st,mode = "HDMI";
 
 			status		= "disabled";
 		};
 
 		sti_uni_player1: sti-uni-player@8d81000 {
-			compatible = "st,sti-uni-player";
+			compatible = "st,stih407-uni-player-pcm-out";
 			#sound-dai-cells = <0>;
 			st,syscfg = <&syscfg_core>;
 			clocks = <&clk_s_d0_flexgen CLK_PCM_1>;
@@ -946,17 +942,13 @@
 			reg = <0x8d81000 0x158>;
 			interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
 			dmas = <&fdma0 3 0 1>;
-			dai-name = "Uni Player #1 (PIO)";
 			dma-names = "tx";
-			st,uniperiph-id = <1>;
-			st,version = <5>;
-			st,mode = "PCM";
 
 			status = "disabled";
 		};
 
 		sti_uni_player2: sti-uni-player@8d82000 {
-			compatible = "st,sti-uni-player";
+			compatible = "st,stih407-uni-player-dac";
 			#sound-dai-cells = <0>;
 			st,syscfg = <&syscfg_core>;
 			clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
@@ -966,17 +958,13 @@
 			reg = <0x8d82000 0x158>;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
 			dmas = <&fdma0 4 0 1>;
-			dai-name = "Uni Player #1 (DAC)";
 			dma-names = "tx";
-			st,uniperiph-id = <2>;
-			st,version = <5>;
-			st,mode = "PCM";
 
 			status = "disabled";
 		};
 
 		sti_uni_player3: sti-uni-player@8d85000 {
-			compatible = "st,sti-uni-player";
+			compatible = "st,stih407-uni-player-spdif";
 			#sound-dai-cells = <0>;
 			st,syscfg = <&syscfg_core>;
 			clocks = <&clk_s_d0_flexgen CLK_SPDIFF>;
@@ -987,38 +975,30 @@
 			interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
 			dmas = <&fdma0 7 0 1>;
 			dma-names = "tx";
-			dai-name = "Uni Player #1 (PIO)";
-			st,uniperiph-id = <3>;
-			st,version = <5>;
-			st,mode = "SPDIF";
 
 			status = "disabled";
 		};
 
 		sti_uni_reader0: sti-uni-reader@8d83000 {
-			compatible = "st,sti-uni-reader";
+			compatible = "st,stih407-uni-reader-pcm_in";
 			#sound-dai-cells = <0>;
 			st,syscfg = <&syscfg_core>;
 			reg = <0x8d83000 0x158>;
 			interrupts = <GIC_SPI 87 IRQ_TYPE_NONE>;
 			dmas = <&fdma0 5 0 1>;
 			dma-names = "rx";
-			dai-name = "Uni Reader #0 (PCM IN)";
-			st,version = <3>;
 
 			status = "disabled";
 		};
 
 		sti_uni_reader1: sti-uni-reader@8d84000 {
-			compatible = "st,sti-uni-reader";
+			compatible = "st,stih407-uni-reader-hdmi";
 			#sound-dai-cells = <0>;
 			st,syscfg = <&syscfg_core>;
 			reg = <0x8d84000 0x158>;
 			interrupts = <GIC_SPI 88 IRQ_TYPE_NONE>;
 			dmas = <&fdma0 6 0 1>;
 			dma-names = "rx";
-			dai-name = "Uni Reader #1 (HDMI RX)";
-			st,version = <3>;
 
 			status = "disabled";
 		};
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index c325cc0..daab16b 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -1157,7 +1157,7 @@
 			reg = <0x0923f080 0x4>;
 			reg-names = "irqmux";
 			interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>;
-			interrupts-names = "irqmux";
+			interrupt-names = "irqmux";
 			ranges = <0 0x09230000 0x3000>;
 
 			pio40: gpio@09230000 {
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
index 291ffac..fa14983 100644
--- a/arch/arm/boot/dts/stih407.dtsi
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -102,7 +102,7 @@
 							 <&clk_s_d2_quadfs 0>;
 			};
 
-			sti-hdmi@8d04000 {
+			sti_hdmi: sti-hdmi@8d04000 {
 				compatible = "st,stih407-hdmi";
 				reg = <0x8d04000 0x1000>;
 				reg-names = "hdmi-reg";
diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
index 7fb507f..06b0696 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -165,6 +165,9 @@
 			status = "okay";
 		};
 
+		sti_uni_player0: sti-uni-player@8d80000 {
+			status = "okay";
+		};
 		/* SSC11 to HDMI */
 		hdmiddc: i2c@9541000 {
 			/* HDMI V1.3a supports Standard mode only */
@@ -174,9 +177,22 @@
 			status = "okay";
 		};
 
-		sti-display-subsystem {
-			sti_hdmi: sti-hdmi@8d04000 {
-				status = "okay";
+		sound {
+			compatible = "simple-audio-card";
+			simple-audio-card,name = "STI-B2260";
+			status = "okay";
+
+			simple-audio-card,dai-link@0 {
+				/* DAC */
+				format = "i2s";
+				mclk-fs = <128>;
+				cpu {
+					sound-dai = <&sti_uni_player0>;
+				};
+
+				codec {
+					sound-dai = <&sti_hdmi>;
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi
index 8598eff..07c8ef9 100644
--- a/arch/arm/boot/dts/stih410-clock.dtsi
+++ b/arch/arm/boot/dts/stih410-clock.dtsi
@@ -208,7 +208,8 @@
 						     "clk-clust-hades",
 						     "clk-hwpe-hades",
 						     "clk-fc-hades";
-				clock-critical = <CLK_ICN_CPU>,
+				clock-critical = <CLK_PROC_STFE>,
+						 <CLK_ICN_CPU>,
 						 <CLK_TX_ICN_DMU>,
 						 <CLK_EXT2F_A9>,
 						 <CLK_ICN_LMI>,
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index a3ef734..281a124 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -193,7 +193,7 @@
 							 <&clk_s_d2_quadfs 0>;
 			};
 
-			sti-hdmi@8d04000 {
+			sti_hdmi: sti-hdmi@8d04000 {
 				compatible = "st,stih407-hdmi";
 				reg = <0x8d04000 0x1000>;
 				reg-names = "hdmi-reg";
diff --git a/arch/arm/boot/dts/stih415-b2000.dts b/arch/arm/boot/dts/stih415-b2000.dts
deleted file mode 100644
index bdfbd37..0000000
--- a/arch/arm/boot/dts/stih415-b2000.dts
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-/dts-v1/;
-#include "stih415.dtsi"
-#include "stih41x-b2000.dtsi"
-/ {
-	model = "STiH415 B2000 Board";
-	compatible = "st,stih415-b2000", "st,stih415";
-};
diff --git a/arch/arm/boot/dts/stih415-b2020.dts b/arch/arm/boot/dts/stih415-b2020.dts
deleted file mode 100644
index 71903a8..0000000
--- a/arch/arm/boot/dts/stih415-b2020.dts
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-/dts-v1/;
-#include "stih415.dtsi"
-#include "stih41x-b2020.dtsi"
-/ {
-	model = "STiH415 B2020 Board";
-	compatible = "st,stih415-b2020", "st,stih415";
-};
diff --git a/arch/arm/boot/dts/stih415-clock.dtsi b/arch/arm/boot/dts/stih415-clock.dtsi
deleted file mode 100644
index 3ee3451..0000000
--- a/arch/arm/boot/dts/stih415-clock.dtsi
+++ /dev/null
@@ -1,533 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <dt-bindings/clock/stih415-clks.h>
-
-/ {
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * Fixed 30MHz oscillator input to SoC
-		 */
-		clk_sysin: clk-sysin {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <30000000>;
-		};
-
-		/*
-		 * ClockGenAs on SASG1
-		 */
-		clockgen-a@fee62000 {
-			reg = <0xfee62000 0xb48>;
-
-			clk_s_a0_pll: clk-s-a0-pll {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-plls-c65";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a0-pll0-hs",
-						     "clk-s-a0-pll0-ls",
-						     "clk-s-a0-pll1";
-			};
-
-			clk_s_a0_osc_prediv: clk-s-a0-osc-prediv {
-				#clock-cells = <0>;
-				compatible = "st,clkgena-prediv-c65",
-					     "st,clkgena-prediv";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a0-osc-prediv";
-			};
-
-			clk_s_a0_hs: clk-s-a0-hs {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c65-hs",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_s_a0_osc_prediv>,
-					 <&clk_s_a0_pll 0>, /* PLL0 HS */
-					 <&clk_s_a0_pll 2>; /* PLL1 */
-
-				clock-output-names = "clk-s-fdma-0",
-						     "clk-s-fdma-1",
-						     ""; /* clk-s-jit-sense */
-						     /* Fourth output unused */
-			};
-
-			clk_s_a0_ls: clk-s-a0-ls {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c65-ls",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_s_a0_osc_prediv>,
-					 <&clk_s_a0_pll 1>, /* PLL0 LS */
-					 <&clk_s_a0_pll 2>; /* PLL1 */
-
-				clock-output-names = "clk-s-icn-reg-0",
-						     "clk-s-icn-if-0",
-						     "clk-s-icn-reg-lp-0",
-						     "clk-s-emiss",
-						     "clk-s-eth1-phy",
-						     "clk-s-mii-ref-out";
-						 /* Remaining outputs unused */
-			};
-		};
-
-		clockgen-a@fee81000 {
-			reg = <0xfee81000 0xb48>;
-
-			clk_s_a1_pll: clk-s-a1-pll {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-plls-c65";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a1-pll0-hs",
-						     "clk-s-a1-pll0-ls",
-						     "clk-s-a1-pll1";
-			};
-
-			clk_s_a1_osc_prediv: clk-s-a1-osc-prediv {
-				#clock-cells = <0>;
-				compatible = "st,clkgena-prediv-c65",
-					     "st,clkgena-prediv";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a1-osc-prediv";
-			};
-
-			clk_s_a1_hs: clk-s-a1-hs {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c65-hs",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_s_a1_osc_prediv>,
-					 <&clk_s_a1_pll 0>, /* PLL0 HS */
-					 <&clk_s_a1_pll 2>; /* PLL1 */
-
-				clock-output-names = "", /* Reserved */
-						     "", /* Reserved */
-						     "clk-s-stac-phy",
-						     "clk-s-vtac-tx-phy";
-			};
-
-			clk_s_a1_ls: clk-s-a1-ls {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c65-ls",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_s_a1_osc_prediv>,
-					 <&clk_s_a1_pll 1>, /* PLL0 LS */
-					 <&clk_s_a1_pll 2>; /* PLL1 */
-
-				clock-output-names = "clk-s-icn-if-2",
-						     "clk-s-card-mmc",
-						     "clk-s-icn-if-1",
-						     "clk-s-gmac0-phy",
-						     "clk-s-nand-ctrl",
-						     "", /* Reserved */
-						     "clk-s-mii0-ref-out",
-						     ""; /* clk-s-stac-sys */
-						 /* Remaining outputs unused */
-			};
-		};
-
-		/*
-		 * ClockGenAs on MPE41
-		 */
-		clockgen-a@fde12000 {
-			reg = <0xfde12000 0xb50>;
-
-			clk_m_a0_pll0: clk-m-a0-pll0 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a0-pll0-phi0",
-						     "clk-m-a0-pll0-phi1",
-						     "clk-m-a0-pll0-phi2",
-						     "clk-m-a0-pll0-phi3";
-			};
-
-			clk_m_a0_pll1: clk-m-a0-pll1 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a0-pll1-phi0",
-						     "clk-m-a0-pll1-phi1",
-						     "clk-m-a0-pll1-phi2",
-						     "clk-m-a0-pll1-phi3";
-			};
-
-			clk_m_a0_osc_prediv: clk-m-a0-osc-prediv {
-				#clock-cells = <0>;
-				compatible = "st,clkgena-prediv-c32",
-					     "st,clkgena-prediv";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a0-osc-prediv";
-			};
-
-			clk_m_a0_div0: clk-m-a0-div0 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf0",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a0_osc_prediv>,
-					 <&clk_m_a0_pll0 0>, /* PLL0 PHI0 */
-					 <&clk_m_a0_pll1 0>; /* PLL1 PHI0 */
-
-				clock-output-names = "clk-m-apb-pm", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "clk-m-pp-dmu-0",
-						     "clk-m-pp-dmu-1",
-						     "clk-m-icm-disp",
-						     ""; /* Unused */
-			};
-
-			clk_m_a0_div1: clk-m-a0-div1 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf1",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a0_osc_prediv>,
-					 <&clk_m_a0_pll0 1>, /* PLL0 PHI1 */
-					 <&clk_m_a0_pll1 1>; /* PLL1 PHI1 */
-
-				clock-output-names = "", /* Unused */
-						     "", /* Unused */
-						     "clk-m-a9-ext2f",
-						     "clk-m-st40rt",
-						     "clk-m-st231-dmu-0",
-						     "clk-m-st231-dmu-1",
-						     "clk-m-st231-aud",
-						     "clk-m-st231-gp-0";
-			};
-
-			clk_m_a0_div2: clk-m-a0-div2 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf2",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a0_osc_prediv>,
-					 <&clk_m_a0_pll0 2>, /* PLL0 PHI2 */
-					 <&clk_m_a0_pll1 2>; /* PLL1 PHI2 */
-
-				clock-output-names = "clk-m-st231-gp-1",
-						     "clk-m-icn-cpu",
-						     "clk-m-icn-stac",
-						     "clk-m-icn-dmu-0",
-						     "clk-m-icn-dmu-1",
-						     "", /* Unused */
-						     "", /* Unused */
-						     ""; /* Unused */
-			};
-
-			clk_m_a0_div3: clk-m-a0-div3 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf3",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a0_osc_prediv>,
-					 <&clk_m_a0_pll0 3>, /* PLL0 PHI3 */
-					 <&clk_m_a0_pll1 3>; /* PLL1 PHI3 */
-
-				clock-output-names = "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "clk-m-icn-eram",
-						     "clk-m-a9-trace";
-			};
-		};
-
-		clockgen-a@fd6db000 {
-			reg = <0xfd6db000 0xb50>;
-
-			clk_m_a1_pll0: clk-m-a1-pll0 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a1-pll0-phi0",
-						     "clk-m-a1-pll0-phi1",
-						     "clk-m-a1-pll0-phi2",
-						     "clk-m-a1-pll0-phi3";
-			};
-
-			clk_m_a1_pll1: clk-m-a1-pll1 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a1-pll1-phi0",
-						     "clk-m-a1-pll1-phi1",
-						     "clk-m-a1-pll1-phi2",
-						     "clk-m-a1-pll1-phi3";
-			};
-
-			clk_m_a1_osc_prediv: clk-m-a1-osc-prediv {
-				#clock-cells = <0>;
-				compatible = "st,clkgena-prediv-c32",
-					     "st,clkgena-prediv";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a1-osc-prediv";
-			};
-
-			clk_m_a1_div0: clk-m-a1-div0 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf0",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a1_osc_prediv>,
-					 <&clk_m_a1_pll0 0>, /* PLL0 PHI0 */
-					 <&clk_m_a1_pll1 0>; /* PLL1 PHI0 */
-
-				clock-output-names = "clk-m-fdma-12",
-						     "clk-m-fdma-10",
-						     "clk-m-fdma-11",
-						     "clk-m-hva-lmi",
-						     "clk-m-proc-sc",
-						     "clk-m-tp",
-						     "clk-m-icn-gpu",
-						     "clk-m-icn-vdp-0";
-			};
-
-			clk_m_a1_div1: clk-m-a1-div1 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf1",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a1_osc_prediv>,
-					 <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */
-					 <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */
-
-				clock-output-names = "clk-m-icn-vdp-1",
-						     "clk-m-icn-vdp-2",
-						     "clk-m-icn-vdp-3",
-						     "clk-m-prv-t1-bus",
-						     "clk-m-icn-vdp-4",
-						     "clk-m-icn-reg-10",
-						     "", /* Unused */
-						     ""; /* clk-m-icn-st231 */
-			};
-
-			clk_m_a1_div2: clk-m-a1-div2 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf2",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a1_osc_prediv>,
-					 <&clk_m_a1_pll0 2>, /* PLL0 PHI2 */
-					 <&clk_m_a1_pll1 2>; /* PLL1 PHI2 */
-
-				clock-output-names = "clk-m-fvdp-proc-alt",
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     ""; /* Unused */
-			};
-
-			clk_m_a1_div3: clk-m-a1-div3 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf3",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a1_osc_prediv>,
-					 <&clk_m_a1_pll0 3>, /* PLL0 PHI3 */
-					 <&clk_m_a1_pll1 3>; /* PLL1 PHI3 */
-
-				clock-output-names = "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     ""; /* Unused */
-			};
-		};
-
-		clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2 {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&clk_m_a0_div1 2>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-
-		clockgen-a@fd345000 {
-			reg = <0xfd345000 0xb50>;
-
-			clk_m_a2_pll0: clk-m-a2-pll0 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a2-pll0-phi0",
-						     "clk-m-a2-pll0-phi1",
-						     "clk-m-a2-pll0-phi2",
-						     "clk-m-a2-pll0-phi3";
-			};
-
-			clk_m_a2_pll1: clk-m-a2-pll1 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a2-pll1-phi0",
-						     "clk-m-a2-pll1-phi1",
-						     "clk-m-a2-pll1-phi2",
-						     "clk-m-a2-pll1-phi3";
-			};
-
-			clk_m_a2_osc_prediv: clk-m-a2-osc-prediv {
-				#clock-cells = <0>;
-				compatible = "st,clkgena-prediv-c32",
-					     "st,clkgena-prediv";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a2-osc-prediv";
-			};
-
-			clk_m_a2_div0: clk-m-a2-div0 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf0",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a2_osc_prediv>,
-					 <&clk_m_a2_pll0 0>, /* PLL0 PHI0 */
-					 <&clk_m_a2_pll1 0>; /* PLL1 PHI0 */
-
-				clock-output-names = "clk-m-vtac-main-phy",
-						     "clk-m-vtac-aux-phy",
-						     "clk-m-stac-phy",
-						     "clk-m-stac-sys",
-						     "", /* clk-m-mpestac-pg */
-						     "", /* clk-m-mpestac-wc */
-						     "", /* clk-m-mpevtacaux-pg*/
-						     ""; /* clk-m-mpevtacmain-pg*/
-			};
-
-			clk_m_a2_div1: clk-m-a2-div1 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf1",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a2_osc_prediv>,
-					 <&clk_m_a2_pll0 1>, /* PLL0 PHI1 */
-					 <&clk_m_a2_pll1 1>; /* PLL1 PHI1 */
-
-				clock-output-names = "", /* clk-m-mpevtacrx0-wc */
-						     "", /* clk-m-mpevtacrx1-wc */
-						     "clk-m-compo-main",
-						     "clk-m-compo-aux",
-						     "clk-m-bdisp-0",
-						     "clk-m-bdisp-1",
-						     "clk-m-icn-bdisp-0",
-						     "clk-m-icn-bdisp-1";
-			};
-
-			clk_m_a2_div2: clk-m-a2-div2 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf2",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a2_osc_prediv>,
-					 <&clk_m_a2_pll0 2>, /* PLL0 PHI2 */
-					 <&clk_m_a2_pll1 2>; /* PLL1 PHI2 */
-
-				clock-output-names = "", /* clk-m-icn-hqvdp0 */
-						     "", /* clk-m-icn-hqvdp1 */
-						     "clk-m-icn-compo",
-						     "", /* clk-m-icn-vdpaux */
-						     "clk-m-icn-ts",
-						     "clk-m-icn-reg-lp-10",
-						     "clk-m-dcephy-impctrl",
-						     ""; /* Unused */
-			};
-
-			clk_m_a2_div3: clk-m-a2-div3 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf3",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a2_osc_prediv>,
-					 <&clk_m_a2_pll0 3>, /* PLL0 PHI3 */
-					 <&clk_m_a2_pll1 3>; /* PLL1 PHI3 */
-
-				clock-output-names = ""; /* Unused */
-						/* Remaining outputs unused */
-			};
-		};
-
-		/*
-		 * A9 PLL
-		 */
-		clockgen-a9@fdde00d8 {
-			reg = <0xfdde00d8 0x70>;
-
-			clockgen_a9_pll: clockgen-a9-pll {
-				#clock-cells = <1>;
-				compatible = "st,stih415-plls-c32-a9", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-				clock-output-names = "clockgen-a9-pll-odf";
-			};
-		};
-
-		/*
-		 * ARM CPU related clocks
-		 */
-		clk_m_a9: clk-m-a9@fdde00d8 {
-			#clock-cells = <0>;
-			compatible = "st,stih415-clkgen-a9-mux", "st,clkgen-mux";
-			reg = <0xfdde00d8 0x4>;
-			clocks = <&clockgen_a9_pll 0>,
-				 <&clockgen_a9_pll 0>,
-				 <&clk_m_a0_div1 2>,
-				 <&clk_m_a9_ext2f_div2>;
-		};
-
-		/*
-		 * ARM Peripheral clock for timers
-		 */
-		arm_periph_clk: clk-m-a9-periphs {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&clk_m_a9>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi
deleted file mode 100644
index bd028ce..0000000
--- a/arch/arm/boot/dts/stih415-pinctrl.dtsi
+++ /dev/null
@@ -1,545 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-#include "st-pincfg.h"
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-/ {
-
-	aliases {
-		gpio0	= &pio0;
-		gpio1	= &pio1;
-		gpio2	= &pio2;
-		gpio3	= &pio3;
-		gpio4	= &pio4;
-		gpio5	= &pio5;
-		gpio6	= &pio6;
-		gpio7	= &pio7;
-		gpio8	= &pio8;
-		gpio9	= &pio9;
-		gpio10	= &pio10;
-		gpio11	= &pio11;
-		gpio12	= &pio12;
-		gpio13	= &pio13;
-		gpio14	= &pio14;
-		gpio15	= &pio15;
-		gpio16	= &pio16;
-		gpio17	= &pio17;
-		gpio18	= &pio18;
-		gpio19	= &pio100;
-		gpio20	= &pio101;
-		gpio21	= &pio102;
-		gpio22	= &pio103;
-		gpio23	= &pio104;
-		gpio24	= &pio105;
-		gpio25	= &pio106;
-		gpio26	= &pio107;
-	};
-
-	soc {
-		pin-controller-sbc {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih415-sbc-pinctrl";
-			st,syscfg	= <&syscfg_sbc>;
-			reg 		= <0xfe61f080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges 		= <0 0xfe610000 0x5000>;
-
-			pio0: gpio@fe610000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO0";
-			};
-			pio1: gpio@fe611000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO1";
-			};
-			pio2: gpio@fe612000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO2";
-			};
-			pio3: gpio@fe613000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x3000 0x100>;
-				st,bank-name	= "PIO3";
-			};
-			pio4: gpio@fe614000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x4000 0x100>;
-				st,bank-name	= "PIO4";
-			};
-
-			sbc_serial1 {
-				pinctrl_sbc_serial1:sbc_serial1 {
-					st,pins {
-						tx	= <&pio2 6 ALT3 OUT>;
-						rx	= <&pio2 7 ALT3 IN>;
-					};
-				};
-			};
-
-			keyscan {
-				pinctrl_keyscan: keyscan {
-					st,pins {
-						keyin0 = <&pio0 2 ALT2 IN>;
-						keyin1 = <&pio0 3 ALT2 IN>;
-						keyin2 = <&pio0 4 ALT2 IN>;
-						keyin3 = <&pio2 6 ALT2 IN>;
-
-						keyout0 = <&pio1 6 ALT2 OUT>;
-						keyout1 = <&pio1 7 ALT2 OUT>;
-						keyout2 = <&pio0 6 ALT2 OUT>;
-						keyout3 = <&pio2 7 ALT2 OUT>;
-					};
-				};
-			};
-
-			sbc_i2c0 {
-				pinctrl_sbc_i2c0_default: sbc_i2c0-default {
-					st,pins {
-						sda = <&pio4 6 ALT1 BIDIR>;
-						scl = <&pio4 5 ALT1 BIDIR>;
-					};
-				};
-			};
-
-			sbc_i2c1 {
-				pinctrl_sbc_i2c1_default: sbc_i2c1-default {
-					st,pins {
-						sda = <&pio3 2 ALT2 BIDIR>;
-						scl = <&pio3 1 ALT2 BIDIR>;
-					};
-				};
-			};
-
-			rc{
-				pinctrl_ir: ir0 {
-					st,pins {
-						ir = <&pio4 0 ALT2 IN>;
-					};
-				};
-			};
-
-			gmac1 {
-				pinctrl_mii1: mii1 {
-						st,pins {
-						 txd0   = <&pio0 0 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
-						 txd1   = <&pio0 1 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
-						 txd2   = <&pio0 2 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
-						 txd3   = <&pio0 3 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
-						 txer   = <&pio0 4 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
-						 txen   = <&pio0 5 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
-						 txclk  = <&pio0 6 ALT1 IN   NICLK	0	CLK_A>;
-						 col    = <&pio0 7 ALT1 IN   BYPASS	1000>;
-						 mdio   = <&pio1 0 ALT1 OUT  BYPASS	0>;
-						 mdc    = <&pio1 1 ALT1 OUT  NICLK	0	CLK_A>;
-						 crs    = <&pio1 2 ALT1 IN   BYPASS	1000>;
-						 mdint  = <&pio1 3 ALT1 IN   BYPASS	0>;
-						 rxd0   = <&pio1 4 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
-						 rxd1   = <&pio1 5 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
-						 rxd2   = <&pio1 6 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
-						 rxd3   = <&pio1 7 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
-						 rxdv   = <&pio2 0 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
-						 rx_er  = <&pio2 1 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
-						 rxclk  = <&pio2 2 ALT1 IN   NICLK	0	CLK_A>;
-						 phyclk = <&pio2 3 ALT1 IN   NICLK	1000	CLK_A>;
-					};
-				};
-
-				pinctrl_rgmii1: rgmii1-0 {
-					st,pins {
-						 txd0 =	 <&pio0 0 ALT1 OUT DE_IO	1000	CLK_A>;
-						 txd1 =	 <&pio0 1 ALT1 OUT DE_IO	1000	CLK_A>;
-						 txd2 =	 <&pio0 2 ALT1 OUT DE_IO	1000	CLK_A>;
-						 txd3 =	 <&pio0 3 ALT1 OUT DE_IO	1000	CLK_A>;
-						 txen =	 <&pio0 5 ALT1 OUT DE_IO	0	CLK_A>;
-						 txclk = <&pio0 6 ALT1 IN	NICLK	0	CLK_A>;
-						 mdio =	 <&pio1 0 ALT1 OUT	BYPASS	0>;
-						 mdc =	 <&pio1 1 ALT1 OUT	NICLK	0	CLK_A>;
-						 rxd0 =	 <&pio1 4 ALT1 IN DE_IO	0	CLK_A>;
-						 rxd1 =	 <&pio1 5 ALT1 IN DE_IO	0	CLK_A>;
-						 rxd2 =	 <&pio1 6 ALT1 IN DE_IO	0	CLK_A>;
-						 rxd3 =	 <&pio1 7 ALT1 IN DE_IO	0	CLK_A>;
-
-						 rxdv =	  <&pio2 0 ALT1 IN DE_IO	500	CLK_A>;
-						 rxclk =  <&pio2 2 ALT1 IN	NICLK	0	CLK_A>;
-						 phyclk = <&pio2 3 ALT4 OUT	NICLK	0	CLK_B>;
-
-						 clk125= <&pio3 7 ALT4 IN 	NICLK	0	CLK_A>;
-					};
-				};
-			};
-		};
-
-		pin-controller-front {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih415-front-pinctrl";
-			st,syscfg	= <&syscfg_front>;
-			reg 		= <0xfee0f080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges		= <0 0xfee00000 0x8000>;
-
-			pio5: gpio@fee00000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO5";
-			};
-			pio6: gpio@fee01000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO6";
-			};
-			pio7: gpio@fee02000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO7";
-			};
-			pio8: gpio@fee03000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x3000 0x100>;
-				st,bank-name	= "PIO8";
-			};
-			pio9: gpio@fee04000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x4000 0x100>;
-				st,bank-name	= "PIO9";
-			};
-			pio10: gpio@fee05000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x5000 0x100>;
-				st,bank-name	= "PIO10";
-			};
-			pio11: gpio@fee06000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x6000 0x100>;
-				st,bank-name	= "PIO11";
-			};
-			pio12: gpio@fee07000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x7000 0x100>;
-				st,bank-name	= "PIO12";
-			};
-
-			i2c0 {
-				pinctrl_i2c0_default: i2c0-default {
-					st,pins {
-						sda = <&pio9 3 ALT1 BIDIR>;
-						scl = <&pio9 2 ALT1 BIDIR>;
-					};
-				};
-			};
-
-			i2c1 {
-				pinctrl_i2c1_default: i2c1-default {
-					st,pins {
-						sda = <&pio12 1 ALT1 BIDIR>;
-						scl = <&pio12 0 ALT1 BIDIR>;
-					};
-				};
-			};
-		};
-
-		pin-controller-rear {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih415-rear-pinctrl";
-			st,syscfg	= <&syscfg_rear>;
-			reg 		= <0xfe82f080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges		= <0 0xfe820000 0x8000>;
-
-			pio13: gpio@fe820000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO13";
-			};
-			pio14: gpio@fe821000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO14";
-			};
-			pio15: gpio@fe822000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO15";
-			};
-			pio16: gpio@fe823000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x3000 0x100>;
-				st,bank-name	= "PIO16";
-			};
-			pio17: gpio@fe824000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x4000 0x100>;
-				st,bank-name	= "PIO17";
-			};
-			pio18: gpio@fe825000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x5000 0x100>;
-				st,bank-name	= "PIO18";
-			};
-
-			serial2 {
-				pinctrl_serial2: serial2-0 {
-					st,pins {
-						tx	= <&pio17 4 ALT2 OUT>;
-						rx	= <&pio17 5 ALT2 IN>;
-					};
-				};
-			};
-
-			gmac0{
-				pinctrl_mii0: mii0 {
-					st,pins {
-					 mdint =	<&pio13 6 ALT2	IN	BYPASS		0>;
-					 txen =		<&pio13 7 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
-
-					 txd0 =		<&pio14 0 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
-					 txd1 =		<&pio14 1 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
-					 txd2 =		<&pio14 2 ALT2	OUT	SE_NICLK_IO	0	CLK_B>;
-					 txd3 =		<&pio14 3 ALT2	OUT	SE_NICLK_IO	0	CLK_B>;
-
-					 txclk =	<&pio15 0 ALT2	IN	NICLK		0	CLK_A>;
-					 txer =		<&pio15 1 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
-					 crs =		<&pio15 2 ALT2	IN	BYPASS		1000>;
-					 col =		<&pio15 3 ALT2	IN	BYPASS		1000>;
-					 mdio  =        <&pio15 4 ALT2	OUT	BYPASS 	3000>;
-					 mdc   =        <&pio15 5 ALT2	OUT     NICLK  	0    	CLK_B>;
-
-					 rxd0 =		<&pio16 0 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
-					 rxd1 =		<&pio16 1 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
-					 rxd2 =		<&pio16 2 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
-					 rxd3 =		<&pio16 3 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
-					 rxdv =		<&pio15 6 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
-					 rx_er =	<&pio15 7 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
-					 rxclk =	<&pio17 0 ALT2	IN	NICLK		0	CLK_A>;
-					 phyclk =	<&pio13 5 ALT2	OUT	NICLK	1000	CLK_A>;
-
-					};
-				};
-
-			pinctrl_gmii0: gmii0 {
-				st,pins {
-					 mdint =	<&pio13 6	ALT2 IN		BYPASS	0>;
-					 mdio  =        <&pio15 4 	ALT2 OUT	BYPASS 	3000>;
-					 mdc   =        <&pio15 5 	ALT2 OUT    	NICLK  	0    	CLK_B>;
-					 txen =		<&pio13 7	ALT2 OUT	SE_NICLK_IO	3000	CLK_A>;
-
-					 txd0 =		<&pio14 0	ALT2 OUT	SE_NICLK_IO	3000	CLK_A>;
-					 txd1 =		<&pio14 1	ALT2 OUT	SE_NICLK_IO	3000	CLK_A>;
-					 txd2 =		<&pio14 2	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
-					 txd3 =		<&pio14 3	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
-					 txd4 =		<&pio14 4	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
-					 txd5 =		<&pio14 5	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
-					 txd6 =		<&pio14 6	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
-					 txd7 =		<&pio14 7	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
-
-					 txclk =	<&pio15 0	ALT2 IN		NICLK	0	CLK_A>;
-					 txer =		<&pio15 1	ALT2 OUT 	SE_NICLK_IO	3000	CLK_A>;
-					 crs =		<&pio15 2	ALT2 IN		BYPASS	1000>;
-					 col =		<&pio15 3	ALT2 IN		BYPASS	1000>;
-					 rxdv =		<&pio15 6	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rx_er =	<&pio15 7	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-
-					 rxd0 =		<&pio16 0	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rxd1 =		<&pio16 1	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rxd2 =		<&pio16 2	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rxd3 =		<&pio16 3	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rxd4 =		<&pio16 4	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rxd5 =		<&pio16 5	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rxd6 =		<&pio16 6	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rxd7 =		<&pio16 7	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-
-					 rxclk =	<&pio17 0	ALT2 IN	NICLK	0	CLK_A>;
-					 clk125 =	<&pio17 6	ALT1 IN	NICLK	0	CLK_A>;
-                                         phyclk =       <&pio13 5       ALT4 OUT NICLK   0       CLK_B>;
-
-
-					};
-				};
-			};
-
-			mmc0 {
-				pinctrl_mmc0: mmc0 {
-					st,pins {
-						mmcclk = <&pio13 4 ALT4 BIDIR_PU NICLK 0 CLK_B>;
-						data0  = <&pio14 4 ALT4 BIDIR_PU BYPASS 0>;
-						data1  = <&pio14 5 ALT4 BIDIR_PU BYPASS 0>;
-						data2  = <&pio14 6 ALT4 BIDIR_PU BYPASS 0>;
-						data3  = <&pio14 7 ALT4 BIDIR_PU BYPASS 0>;
-						cmd    = <&pio15 1 ALT4 BIDIR_PU BYPASS 0>;
-						wp     = <&pio15 3 ALT4 IN>;
-						data4  = <&pio16 4 ALT4 BIDIR_PU BYPASS 0>;
-						data5  = <&pio16 5 ALT4 BIDIR_PU BYPASS 0>;
-						data6  = <&pio16 6 ALT4 BIDIR_PU BYPASS 0>;
-						data7  = <&pio16 7 ALT4 BIDIR_PU BYPASS 0>;
-						pwr    = <&pio17 1 ALT4 OUT>;
-						cd     = <&pio17 2 ALT4 IN>;
-						led    = <&pio17 3 ALT4 OUT>;
-					};
-				};
-			};
-		};
-
-		pin-controller-left {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih415-left-pinctrl";
-			st,syscfg	= <&syscfg_left>;
-			reg 		= <0xfd6bf080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges		= <0 0xfd6b0000 0x3000>;
-
-			pio100: gpio@fd6b0000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO100";
-			};
-			pio101: gpio@fd6b1000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO101";
-			};
-			pio102: gpio@fd6b2000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO102";
-			};
-		};
-
-		pin-controller-right {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih415-right-pinctrl";
-			st,syscfg	= <&syscfg_right>;
-			reg 		= <0xfd33f080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges		= <0 0xfd330000 0x5000>;
-
-			pio103: gpio@fd330000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO103";
-			};
-			pio104: gpio@fd331000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO104";
-			};
-			pio105: gpio@fd332000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO105";
-			};
-			pio106: gpio@fd333000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x3000 0x100>;
-				st,bank-name	= "PIO106";
-			};
-			pio107: gpio@fd334000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x4000 0x100>;
-				st,bank-name	= "PIO107";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi
deleted file mode 100644
index 12427e6..0000000
--- a/arch/arm/boot/dts/stih415.dtsi
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-#include "stih41x.dtsi"
-#include "stih415-clock.dtsi"
-#include "stih415-pinctrl.dtsi"
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/reset/stih415-resets.h>
-/ {
-
-	L2: cache-controller {
-		compatible = "arm,pl310-cache";
-		reg = <0xfffe2000 0x1000>;
-		arm,data-latency = <3 2 2>;
-		arm,tag-latency = <1 1 1>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupt-parent = <&intc>;
-		ranges;
-		compatible	= "simple-bus";
-
-		powerdown: powerdown-controller {
-			#reset-cells = <1>;
-			compatible = "st,stih415-powerdown";
-		};
-
-		softreset: softreset-controller {
-			#reset-cells = <1>;
-			compatible = "st,stih415-softreset";
-		};
-
-		syscfg_sbc: sbc-syscfg@fe600000{
-			compatible      = "st,stih415-sbc-syscfg", "syscon";
-			reg		= <0xfe600000 0xb4>;
-		};
-
-		syscfg_front: front-syscfg@fee10000{
-			compatible      = "st,stih415-front-syscfg", "syscon";
-			reg		= <0xfee10000 0x194>;
-		};
-
-		syscfg_rear: rear-syscfg@fe830000{
-			compatible      = "st,stih415-rear-syscfg", "syscon";
-			reg		= <0xfe830000 0x190>;
-		};
-
-		/* MPE syscfgs */
-		syscfg_left: left-syscfg@fd690000{
-			compatible      = "st,stih415-left-syscfg", "syscon";
-			reg		= <0xfd690000 0x78>;
-		};
-
-		syscfg_right: right-syscfg@fd320000{
-			compatible      = "st,stih415-right-syscfg", "syscon";
-			reg		= <0xfd320000 0x180>;
-		};
-
-		syscfg_system: system-syscfg@fdde0000  {
-			compatible      = "st,stih415-system-syscfg", "syscon";
-			reg		= <0xfdde0000 0x15c>;
-		};
-
-		syscfg_lpm: lpm-syscfg@fe4b5100{
-			compatible      = "st,stih415-lpm-syscfg", "syscon";
-			reg		= <0xfe4b5100 0x08>;
-		};
-
-		serial2: serial@fed32000 {
-			compatible	= "st,asc";
-			status 		= "disabled";
-			reg		= <0xfed32000 0x2c>;
-			interrupts	= <0 197 0>;
-			pinctrl-names 	= "default";
-			pinctrl-0 	= <&pinctrl_serial2>;
-			clocks		= <&clk_s_a0_ls CLK_ICN_REG>;
-		};
-
-		/* SBC comms block ASCs in SASG1 */
-		sbc_serial1: serial@fe531000 {
-			compatible	= "st,asc";
-			status 		= "disabled";
-			reg		= <0xfe531000 0x2c>;
-			interrupts	= <0 210 0>;
-			clocks		= <&clk_sysin>;
-			pinctrl-names 	= "default";
-			pinctrl-0	= <&pinctrl_sbc_serial1>;
-		};
-
-		i2c@fed40000 {
-			compatible	= "st,comms-ssc4-i2c";
-			reg		= <0xfed40000 0x110>;
-			interrupts	= <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
-			clocks		= <&clk_s_a0_ls CLK_ICN_REG>;
-			clock-names	= "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_i2c0_default>;
-
-			status		= "disabled";
-		};
-
-		i2c@fed41000 {
-			compatible	= "st,comms-ssc4-i2c";
-			reg		= <0xfed41000 0x110>;
-			interrupts	= <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-			clocks		= <&clk_s_a0_ls CLK_ICN_REG>;
-			clock-names	= "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_i2c1_default>;
-
-			status		= "disabled";
-		};
-
-		i2c@fe540000 {
-			compatible	= "st,comms-ssc4-i2c";
-			reg		= <0xfe540000 0x110>;
-			interrupts	= <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
-			clocks		= <&clk_sysin>;
-			clock-names	= "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_sbc_i2c0_default>;
-
-			status		= "disabled";
-		};
-
-		i2c@fe541000 {
-			compatible	= "st,comms-ssc4-i2c";
-			reg		= <0xfe541000 0x110>;
-			interrupts	= <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
-			clocks		= <&clk_sysin>;
-			clock-names	= "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_sbc_i2c1_default>;
-
-			status		= "disabled";
-		};
-
-		ethernet0: dwmac@fe810000 {
-			device_type 	= "network";
-			compatible	= "st,stih415-dwmac", "snps,dwmac", "snps,dwmac-3.610";
-			status 		= "disabled";
-
-			reg		= <0xfe810000 0x8000>;
-			reg-names	= "stmmaceth";
-
-			interrupts 	= <0 147 0>, <0 148 0>, <0 149 0>;
-			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
-			resets			= <&softreset STIH415_ETH0_SOFTRESET>;
-			reset-names		= "stmmaceth";
-
-			snps,pbl 	= <32>;
-			snps,mixed-burst;
-			snps,force_sf_dma_mode;
-
-			st,syscon	= <&syscfg_rear 0x148>;
-
-			pinctrl-names 	= "default";
-			pinctrl-0	= <&pinctrl_mii0>;
-			clock-names	= "stmmaceth", "sti-ethclk";
-			clocks		= <&clk_s_a1_ls CLK_ICN_IF_2>, <&clk_s_a1_ls CLK_GMAC0_PHY>;
-		};
-
-		ethernet1: dwmac@fef08000 {
-			device_type = "network";
-			compatible	= "st,stih415-dwmac", "snps,dwmac", "snps,dwmac-3.610";
-			status 		= "disabled";
-			reg		= <0xfef08000 0x8000>;
-			reg-names	= "stmmaceth";
-			interrupts 	= <0 150 0>, <0 151 0>, <0 152 0>;
-			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
-
-			snps,pbl	= <32>;
-			snps,mixed-burst;
-			snps,force_sf_dma_mode;
-
-			st,syscon		= <&syscfg_sbc 0x74>;
-
-			resets			= <&softreset STIH415_ETH1_SOFTRESET>;
-			reset-names		= "stmmaceth";
-			pinctrl-names 	= "default";
-			pinctrl-0	= <&pinctrl_mii1>;
-			clock-names	= "stmmaceth", "sti-ethclk";
-			clocks		= <&clk_s_a0_ls CLK_ICN_REG>, <&clk_s_a0_ls CLK_ETH1_PHY>;
-		};
-
-		rc: rc@fe518000 {
-			compatible	= "st,comms-irb";
-			reg		= <0xfe518000 0x234>;
-			interrupts	=  <0 203 0>;
-			clocks		= <&clk_sysin>;
-			rx-mode		= "infrared";
-			pinctrl-names 	= "default";
-			pinctrl-0	= <&pinctrl_ir>;
-			resets		= <&softreset STIH415_IRB_SOFTRESET>;
-		};
-
-		keyscan: keyscan@fe4b0000 {
-			compatible = "st,sti-keyscan";
-			status = "disabled";
-			reg = <0xfe4b0000 0x2000>;
-			interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>;
-			clocks = <&clk_sysin>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_keyscan>;
-			resets	= <&powerdown STIH415_KEYSCAN_POWERDOWN>,
-				  <&softreset STIH415_KEYSCAN_SOFTRESET>;
-		};
-
-		mmc0: sdhci@fe81e000 {
-			compatible      = "st,sdhci";
-			status          = "disabled";
-			reg             = <0xfe81e000 0x1000>;
-			interrupts      = <GIC_SPI 145 IRQ_TYPE_NONE>;
-			interrupt-names = "mmcirq";
-			pinctrl-names   = "default";
-			pinctrl-0       = <&pinctrl_mmc0>;
-			clock-names     = "mmc";
-			clocks          = <&clk_s_a1_ls 1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/stih416-b2000.dts b/arch/arm/boot/dts/stih416-b2000.dts
deleted file mode 100644
index 488e80a..0000000
--- a/arch/arm/boot/dts/stih416-b2000.dts
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-/dts-v1/;
-#include "stih416.dtsi"
-#include "stih41x-b2000.dtsi"
-/ {
-	model = "STiH416 B2000";
-	compatible = "st,stih416-b2000", "st,stih416";
-};
diff --git a/arch/arm/boot/dts/stih416-b2020.dts b/arch/arm/boot/dts/stih416-b2020.dts
deleted file mode 100644
index 200a818..0000000
--- a/arch/arm/boot/dts/stih416-b2020.dts
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-/dts-v1/;
-#include "stih416.dtsi"
-#include "stih41x-b2020.dtsi"
-/ {
-	model = "STiH416 B2020";
-	compatible = "st,stih416-b2020", "st,stih416";
-
-	soc {
-		mmc1: sdhci@fe81f000 {
-			status       = "okay";
-			bus-width    = <8>;
-			non-removable;
-		};
-
-		miphy365x_phy: phy@fe382000 {
-			phy_port0: port@fe382000 {
-				st,sata-gen = <3>;
-			};
-
-			phy_port1: port@fe38a000 {
-				st,pcie-tx-pol-inv;
-			};
-		};
-
-		sata0: sata@fe380000{
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/stih416-b2020e.dts b/arch/arm/boot/dts/stih416-b2020e.dts
deleted file mode 100644
index de320cd..0000000
--- a/arch/arm/boot/dts/stih416-b2020e.dts
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
- * Author: Lee Jones <lee.jones@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-/dts-v1/;
-#include "stih416.dtsi"
-#include "stih41x-b2020.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-/ {
-	model = "STiH416 B2020 REV-E";
-	compatible = "st,stih416-b2020", "st,stih416";
-
-	soc {
-		leds {
-			compatible = "gpio-leds";
-			red {
-				label			= "Front Panel LED";
-				gpios			= <&pio4 1 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger	= "heartbeat";
-			};
-			green {
-				gpios			= <&pio1 3 GPIO_ACTIVE_HIGH>;
-				default-state 		= "off";
-			};
-		};
-
-		ethernet1: dwmac@fef08000 {
-			snps,reset-gpio = <&pio0 7>;
-		};
-
-		mmc1: sdhci@fe81f000 {
-			status       = "okay";
-			bus-width    = <8>;
-			non-removable;
-		};
-
-		miphy365x_phy: phy@fe382000 {
-			phy_port0: port@fe382000 {
-				st,sata-gen = <3>;
-			};
-
-			phy_port1: port@fe38a000 {
-				st,pcie-tx-pol-inv;
-			};
-		};
-
-		sata0: sata@fe380000{
-			status = "okay";
-		};
-
-		/* SAS PWM Module */
-		pwm0: pwm@fed10000 {
-			status		= "okay";
-		};
-
-		/* SBC PWM Module */
-		pwm1: pwm@fe510000 {
-			status		= "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/stih416-clock.dtsi b/arch/arm/boot/dts/stih416-clock.dtsi
deleted file mode 100644
index 5b4fb83..0000000
--- a/arch/arm/boot/dts/stih416-clock.dtsi
+++ /dev/null
@@ -1,756 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics R&D Limited
- * <stlinux-devel@stlinux.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <dt-bindings/clock/stih416-clks.h>
-
-/ {
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * Fixed 30MHz oscillator inputs to SoC
-		 */
-		clk_sysin: clk-sysin {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <30000000>;
-		};
-
-		/*
-		 * ClockGenAs on SASG2
-		 */
-		clockgen-a@fee62000 {
-			reg = <0xfee62000 0xb48>;
-
-			clk_s_a0_pll: clk-s-a0-pll {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-plls-c65";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a0-pll0-hs",
-						     "clk-s-a0-pll0-ls",
-						     "clk-s-a0-pll1";
-			};
-
-			clk_s_a0_osc_prediv: clk-s-a0-osc-prediv {
-				#clock-cells = <0>;
-				compatible = "st,clkgena-prediv-c65",
-					     "st,clkgena-prediv";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a0-osc-prediv";
-			};
-
-			clk_s_a0_hs: clk-s-a0-hs {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c65-hs",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_s_a0_osc_prediv>,
-					 <&clk_s_a0_pll 0>, /* PLL0 HS */
-					 <&clk_s_a0_pll 2>; /* PLL1 */
-
-				clock-output-names = "clk-s-fdma-0",
-						     "clk-s-fdma-1",
-						     ""; /* clk-s-jit-sense */
-						     /* Fourth output unused */
-			};
-
-			clk_s_a0_ls: clk-s-a0-ls {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c65-ls",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_s_a0_osc_prediv>,
-					 <&clk_s_a0_pll 1>, /* PLL0 LS */
-					 <&clk_s_a0_pll 2>; /* PLL1 */
-
-				clock-output-names = "clk-s-icn-reg-0",
-						     "clk-s-icn-if-0",
-						     "clk-s-icn-reg-lp-0",
-						     "clk-s-emiss",
-						     "clk-s-eth1-phy",
-						     "clk-s-mii-ref-out";
-						     /* Remaining outputs unused */
-			};
-		};
-
-		clockgen-a@fee81000 {
-			reg = <0xfee81000 0xb48>;
-
-			clk_s_a1_pll: clk-s-a1-pll {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-plls-c65";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a1-pll0-hs",
-						     "clk-s-a1-pll0-ls",
-						     "clk-s-a1-pll1";
-			};
-
-			clk_s_a1_osc_prediv: clk-s-a1-osc-prediv {
-				#clock-cells = <0>;
-				compatible = "st,clkgena-prediv-c65",
-					     "st,clkgena-prediv";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a1-osc-prediv";
-			};
-
-			clk_s_a1_hs: clk-s-a1-hs {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c65-hs",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_s_a1_osc_prediv>,
-					 <&clk_s_a1_pll 0>, /* PLL0 HS */
-					 <&clk_s_a1_pll 2>; /* PLL1 */
-
-				clock-output-names = "", /* Reserved */
-						     "", /* Reserved */
-						     "clk-s-stac-phy",
-						     "clk-s-vtac-tx-phy";
-			};
-
-			clk_s_a1_ls: clk-s-a1-ls {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c65-ls",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_s_a1_osc_prediv>,
-					 <&clk_s_a1_pll 1>, /* PLL0 LS */
-					 <&clk_s_a1_pll 2>; /* PLL1 */
-
-				clock-output-names = "clk-s-icn-if-2",
-						     "clk-s-card-mmc-0",
-						     "clk-s-icn-if-1",
-						     "clk-s-gmac0-phy",
-						     "clk-s-nand-ctrl",
-						     "", /* Reserved */
-						     "clk-s-mii0-ref-out",
-						     "clk-s-stac-sys",
-						     "clk-s-card-mmc-1";
-						     /* Remaining outputs unused */
-			};
-		};
-
-		/*
-		 * ClockGenAs on MPE42
-		 */
-		clockgen-a@fde12000 {
-			reg = <0xfde12000 0xb50>;
-
-			clk_m_a0_pll0: clk-m-a0-pll0 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a0-pll0-phi0",
-						     "clk-m-a0-pll0-phi1",
-						     "clk-m-a0-pll0-phi2",
-						     "clk-m-a0-pll0-phi3";
-			};
-
-			clk_m_a0_pll1: clk-m-a0-pll1 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a0-pll1-phi0",
-						     "clk-m-a0-pll1-phi1",
-						     "clk-m-a0-pll1-phi2",
-						     "clk-m-a0-pll1-phi3";
-			};
-
-			clk_m_a0_osc_prediv: clk-m-a0-osc-prediv {
-				#clock-cells = <0>;
-				compatible = "st,clkgena-prediv-c32",
-					     "st,clkgena-prediv";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a0-osc-prediv";
-			};
-
-			clk_m_a0_div0: clk-m-a0-div0 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf0",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a0_osc_prediv>,
-					 <&clk_m_a0_pll0 0>, /* PLL0 PHI0 */
-					 <&clk_m_a0_pll1 0>; /* PLL1 PHI0 */
-
-				clock-output-names = "", /* Unused */
-						     "", /* Unused */
-						     "clk-m-fdma-12",
-						     "", /* Unused */
-						     "clk-m-pp-dmu-0",
-						     "clk-m-pp-dmu-1",
-						     "clk-m-icm-lmi",
-						     "clk-m-vid-dmu-0";
-			};
-
-			clk_m_a0_div1: clk-m-a0-div1 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf1",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a0_osc_prediv>,
-					 <&clk_m_a0_pll0 1>, /* PLL0 PHI1 */
-					 <&clk_m_a0_pll1 1>; /* PLL1 PHI1 */
-
-				clock-output-names = "clk-m-vid-dmu-1",
-						     "", /* Unused */
-						     "clk-m-a9-ext2f",
-						     "clk-m-st40rt",
-						     "clk-m-st231-dmu-0",
-						     "clk-m-st231-dmu-1",
-						     "clk-m-st231-aud",
-						     "clk-m-st231-gp-0";
-			};
-
-			clk_m_a0_div2: clk-m-a0-div2 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf2",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a0_osc_prediv>,
-					 <&clk_m_a0_pll0 2>, /* PLL0 PHI2 */
-					 <&clk_m_a0_pll1 2>; /* PLL1 PHI2 */
-
-				clock-output-names = "clk-m-st231-gp-1",
-						     "clk-m-icn-cpu",
-						     "clk-m-icn-stac",
-						     "clk-m-tx-icn-dmu-0",
-						     "clk-m-tx-icn-dmu-1",
-						     "clk-m-tx-icn-ts",
-						     "clk-m-icn-vdp-0",
-						     "clk-m-icn-vdp-1";
-			};
-
-			clk_m_a0_div3: clk-m-a0-div3 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf3",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a0_osc_prediv>,
-					 <&clk_m_a0_pll0 3>, /* PLL0 PHI3 */
-					 <&clk_m_a0_pll1 3>; /* PLL1 PHI3 */
-
-				clock-output-names = "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "clk-m-icn-vp8",
-						     "", /* Unused */
-						     "clk-m-icn-reg-11",
-						     "clk-m-a9-trace";
-			};
-		};
-
-		clockgen-a@fd6db000 {
-			reg = <0xfd6db000 0xb50>;
-
-			clk_m_a1_pll0: clk-m-a1-pll0 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a1-pll0-phi0",
-						     "clk-m-a1-pll0-phi1",
-						     "clk-m-a1-pll0-phi2",
-						     "clk-m-a1-pll0-phi3";
-			};
-
-			clk_m_a1_pll1: clk-m-a1-pll1 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a1-pll1-phi0",
-						     "clk-m-a1-pll1-phi1",
-						     "clk-m-a1-pll1-phi2",
-						     "clk-m-a1-pll1-phi3";
-			};
-
-			clk_m_a1_osc_prediv: clk-m-a1-osc-prediv {
-				#clock-cells = <0>;
-				compatible = "st,clkgena-prediv-c32",
-					     "st,clkgena-prediv";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a1-osc-prediv";
-			};
-
-			clk_m_a1_div0: clk-m-a1-div0 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf0",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a1_osc_prediv>,
-					 <&clk_m_a1_pll0 0>, /* PLL0 PHI0 */
-					 <&clk_m_a1_pll1 0>; /* PLL1 PHI0 */
-
-				clock-output-names = "", /* Unused */
-						     "clk-m-fdma-10",
-						     "clk-m-fdma-11",
-						     "clk-m-hva-alt",
-						     "clk-m-proc-sc",
-						     "clk-m-tp",
-						     "clk-m-rx-icn-dmu-0",
-						     "clk-m-rx-icn-dmu-1";
-			};
-
-			clk_m_a1_div1: clk-m-a1-div1 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf1",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a1_osc_prediv>,
-					 <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */
-					 <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */
-
-				clock-output-names = "clk-m-rx-icn-ts",
-						     "clk-m-rx-icn-vdp-0",
-						     "", /* Unused */
-						     "clk-m-prv-t1-bus",
-						     "clk-m-icn-reg-12",
-						     "clk-m-icn-reg-10",
-						     "", /* Unused */
-						     "clk-m-icn-st231";
-			};
-
-			clk_m_a1_div2: clk-m-a1-div2 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf2",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a1_osc_prediv>,
-					 <&clk_m_a1_pll0 2>, /* PLL0 PHI2 */
-					 <&clk_m_a1_pll1 2>; /* PLL1 PHI2 */
-
-				clock-output-names = "clk-m-fvdp-proc-alt",
-						     "clk-m-icn-reg-13",
-						     "clk-m-tx-icn-gpu",
-						     "clk-m-rx-icn-gpu",
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* clk-m-apb-pm-12 */
-						     ""; /* Unused */
-			};
-
-			clk_m_a1_div3: clk-m-a1-div3 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf3",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a1_osc_prediv>,
-					 <&clk_m_a1_pll0 3>, /* PLL0 PHI3 */
-					 <&clk_m_a1_pll1 3>; /* PLL1 PHI3 */
-
-				clock-output-names = "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     ""; /* clk-m-gpu-alt */
-			};
-		};
-
-		clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2 {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&clk_m_a0_div1 2>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-
-		clockgen-a@fd345000 {
-			reg = <0xfd345000 0xb50>;
-
-			clk_m_a2_pll0: clk-m-a2-pll0 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a2-pll0-phi0",
-						     "clk-m-a2-pll0-phi1",
-						     "clk-m-a2-pll0-phi2",
-						     "clk-m-a2-pll0-phi3";
-			};
-
-			clk_m_a2_pll1: clk-m-a2-pll1 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a2-pll1-phi0",
-						     "clk-m-a2-pll1-phi1",
-						     "clk-m-a2-pll1-phi2",
-						     "clk-m-a2-pll1-phi3";
-			};
-
-			clk_m_a2_osc_prediv: clk-m-a2-osc-prediv {
-				#clock-cells = <0>;
-				compatible = "st,clkgena-prediv-c32",
-					     "st,clkgena-prediv";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a2-osc-prediv";
-			};
-
-			clk_m_a2_div0: clk-m-a2-div0 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf0",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a2_osc_prediv>,
-					 <&clk_m_a2_pll0 0>, /* PLL0 PHI0 */
-					 <&clk_m_a2_pll1 0>; /* PLL1 PHI0 */
-
-				clock-output-names = "clk-m-vtac-main-phy",
-						     "clk-m-vtac-aux-phy",
-						     "clk-m-stac-phy",
-						     "clk-m-stac-sys",
-						     "", /* clk-m-mpestac-pg */
-						     "", /* clk-m-mpestac-wc */
-						     "", /* clk-m-mpevtacaux-pg*/
-						     ""; /* clk-m-mpevtacmain-pg*/
-			};
-
-			clk_m_a2_div1: clk-m-a2-div1 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf1",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a2_osc_prediv>,
-					 <&clk_m_a2_pll0 1>, /* PLL0 PHI1 */
-					 <&clk_m_a2_pll1 1>; /* PLL1 PHI1 */
-
-				clock-output-names = "", /* clk-m-mpevtacrx0-wc */
-						     "", /* clk-m-mpevtacrx1-wc */
-						     "clk-m-compo-main",
-						     "clk-m-compo-aux",
-						     "clk-m-bdisp-0",
-						     "clk-m-bdisp-1",
-						     "clk-m-icn-bdisp",
-						     "clk-m-icn-compo";
-			};
-
-			clk_m_a2_div2: clk-m-a2-div2 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf2",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a2_osc_prediv>,
-					 <&clk_m_a2_pll0 2>, /* PLL0 PHI2 */
-					 <&clk_m_a2_pll1 2>; /* PLL1 PHI2 */
-
-				clock-output-names = "clk-m-icn-vdp-2",
-						     "", /* Unused */
-						     "clk-m-icn-reg-14",
-						     "clk-m-mdtp",
-						     "clk-m-jpegdec",
-						     "", /* Unused */
-						     "clk-m-dcephy-impctrl",
-						     ""; /* Unused */
-			};
-
-			clk_m_a2_div3: clk-m-a2-div3 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf3",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a2_osc_prediv>,
-					 <&clk_m_a2_pll0 3>, /* PLL0 PHI3 */
-					 <&clk_m_a2_pll1 3>; /* PLL1 PHI3 */
-
-				clock-output-names = "", /* Unused */
-						     ""; /* clk-m-apb-pm-11 */
-						     /* Remaining outputs unused */
-			};
-		};
-
-		/*
-		 * A9 PLL
-		 */
-		clockgen-a9@fdde08b0 {
-			reg = <0xfdde08b0 0x70>;
-
-			clockgen_a9_pll: clockgen-a9-pll {
-				#clock-cells = <1>;
-				compatible = "st,stih416-plls-c32-a9", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-				clock-output-names = "clockgen-a9-pll-odf";
-			};
-		};
-
-		/*
-		 * ARM CPU related clocks
-		 */
-		clk_m_a9: clk-m-a9@fdde08ac {
-			#clock-cells = <0>;
-			compatible = "st,stih416-clkgen-a9-mux", "st,clkgen-mux";
-			reg = <0xfdde08ac 0x4>;
-			clocks = <&clockgen_a9_pll 0>,
-				 <&clockgen_a9_pll 0>,
-				 <&clk_m_a0_div1 2>,
-				 <&clk_m_a9_ext2f_div2>;
-		};
-
-		/*
-		 * ARM Peripheral clock for timers
-		 */
-		arm_periph_clk: clk-m-a9-periphs {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&clk_m_a9>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-
-		/*
-		 * Frequency synthesizers on the SASG2
-		 */
-		clockgen_b0: clockgen-b0@fee108b4 {
-			#clock-cells = <1>;
-			compatible = "st,stih416-quadfs216", "st,quadfs";
-			reg = <0xfee108b4 0x44>;
-
-			clocks = <&clk_sysin>;
-			clock-output-names = "clk-s-usb48",
-					     "clk-s-dss",
-					     "clk-s-stfe-frc-2",
-					     "clk-s-thsens-scard";
-		};
-
-		clockgen_b1: clockgen-b1@fe8308c4 {
-			#clock-cells = <1>;
-			compatible = "st,stih416-quadfs216", "st,quadfs";
-			reg = <0xfe8308c4 0x44>;
-
-			clocks = <&clk_sysin>;
-			clock-output-names = "clk-s-pcm-0",
-					     "clk-s-pcm-1",
-					     "clk-s-pcm-2",
-					     "clk-s-pcm-3";
-		};
-
-		clockgen_c: clockgen-c@fe8307d0 {
-			#clock-cells = <1>;
-			compatible = "st,stih416-quadfs432", "st,quadfs";
-			reg = <0xfe8307d0 0x44>;
-
-			clocks = <&clk_sysin>;
-			clock-output-names = "clk-s-c-fs0-ch0",
-					     "clk-s-c-vcc-sd",
-					     "clk-s-c-fs0-ch2";
-		};
-
-		clk_s_vcc_hd: clk-s-vcc-hd@fe8308b8 {
-			#clock-cells = <0>;
-			compatible = "st,stih416-clkgenc-vcc-hd", "st,clkgen-mux";
-			reg = <0xfe8308b8 0x4>; /* SYSCFG2558 */
-
-			clocks = <&clk_sysin>,
-				 <&clockgen_c 0>;
-		};
-
-		/*
-		 * Add a dummy clock for the HDMI PHY for the VCC input mux
-		 */
-		clk_s_tmds_fromphy: clk-s-tmds-fromphy {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-		};
-
-		clockgen_c_vcc: clockgen-c-vcc@fe8308ac {
-			#clock-cells = <1>;
-			compatible = "st,stih416-clkgenc", "st,clkgen-vcc";
-			reg = <0xfe8308ac 0xc>; /* SYSCFG2555,2556,2557 */
-
-			clocks = <&clk_s_vcc_hd>,
-				 <&clockgen_c 1>,
-				 <&clk_s_tmds_fromphy>,
-				 <&clockgen_c 2>;
-
-			clock-output-names  = "clk-s-pix-hdmi",
-					      "clk-s-pix-dvo",
-					      "clk-s-out-dvo",
-					      "clk-s-pix-hd",
-					      "clk-s-hddac",
-					      "clk-s-denc",
-					      "clk-s-sddac",
-					      "clk-s-pix-main",
-					      "clk-s-pix-aux",
-					      "clk-s-stfe-frc-0",
-					      "clk-s-ref-mcru",
-					      "clk-s-slave-mcru",
-					      "clk-s-tmds-hdmi",
-					      "clk-s-hdmi-reject-pll",
-					      "clk-s-thsens";
-		};
-
-		clockgen_d: clockgen-d@fee107e0 {
-			#clock-cells = <1>;
-			compatible = "st,stih416-quadfs216", "st,quadfs";
-			reg = <0xfee107e0 0x44>;
-
-			clocks = <&clk_sysin>;
-			clock-output-names = "clk-s-ccsc",
-					     "clk-s-stfe-frc-1",
-					     "clk-s-tsout-1",
-					     "clk-s-mchi";
-		};
-
-		/*
-		 * Frequency synthesizers on the MPE42
-		 */
-		clockgen_e: clockgen-e@fd3208bc {
-			#clock-cells = <1>;
-			compatible = "st,stih416-quadfs660-E", "st,quadfs";
-			reg = <0xfd3208bc 0xb0>;
-
-			clocks = <&clk_sysin>;
-			clock-output-names = "clk-m-pix-mdtp-0",
-					     "clk-m-pix-mdtp-1",
-					     "clk-m-pix-mdtp-2",
-					     "clk-m-mpelpc";
-		};
-
-		clockgen_f: clockgen-f@fd320878 {
-			#clock-cells = <1>;
-			compatible = "st,stih416-quadfs660-F", "st,quadfs";
-			reg = <0xfd320878 0xf0>;
-
-			clocks = <&clk_sysin>;
-			clock-output-names = "clk-m-main-vidfs",
-					     "clk-m-hva-fs",
-					     "clk-m-fvdp-vcpu",
-					     "clk-m-fvdp-proc-fs";
-		};
-
-		clk_m_fvdp_proc: clk-m-fvdp-proc@fd320910 {
-			#clock-cells = <0>;
-			compatible = "st,stih416-clkgenf-vcc-fvdp", "st,clkgen-mux";
-			reg = <0xfd320910 0x4>; /* SYSCFG8580 */
-
-			clocks = <&clk_m_a1_div2 0>,
-				 <&clockgen_f 3>;
-		};
-
-		clk_m_hva: clk-m-hva@fd690868 {
-			#clock-cells = <0>;
-			compatible = "st,stih416-clkgenf-vcc-hva", "st,clkgen-mux";
-			reg = <0xfd690868 0x4>; /* SYSCFG9538 */
-
-			clocks = <&clockgen_f 1>,
-				 <&clk_m_a1_div0 3>;
-		};
-
-		clk_m_f_vcc_hd: clk-m-f-vcc-hd@fd32086c {
-			#clock-cells = <0>;
-			compatible = "st,stih416-clkgenf-vcc-hd", "st,clkgen-mux";
-			reg = <0xfd32086c 0x4>; /* SYSCFG8539 */
-
-			clocks = <&clockgen_c_vcc 7>,
-				 <&clockgen_f 0>;
-		};
-
-		clk_m_f_vcc_sd: clk-m-f-vcc-sd@fd32086c {
-			#clock-cells = <0>;
-			compatible = "st,stih416-clkgenf-vcc-sd", "st,clkgen-mux";
-			reg = <0xfd32086c 0x4>; /* SYSCFG8539 */
-
-			clocks = <&clockgen_c_vcc 8>,
-				 <&clockgen_f 1>;
-		};
-
-		/*
-		 * Add a dummy clock for the HDMIRx external signal clock
-		 */
-		clk_m_pix_hdmirx_sas: clk-m-pix-hdmirx-sas {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-		};
-
-		clockgen_f_vcc: clockgen-f-vcc@fd32086c {
-			#clock-cells = <1>;
-			compatible = "st,stih416-clkgenf", "st,clkgen-vcc";
-			reg = <0xfd32086c 0xc>; /* SYSCFG8539,8540,8541 */
-
-			clocks = <&clk_m_f_vcc_hd>,
-				 <&clk_m_f_vcc_sd>,
-				 <&clockgen_f 0>,
-				 <&clk_m_pix_hdmirx_sas>;
-
-			clock-output-names  = "clk-m-pix-main-pipe",
-					      "clk-m-pix-aux-pipe",
-					      "clk-m-pix-main-cru",
-					      "clk-m-pix-aux-cru",
-					      "clk-m-xfer-be-compo",
-					      "clk-m-xfer-pip-compo",
-					      "clk-m-xfer-aux-compo",
-					      "clk-m-vsens",
-					      "clk-m-pix-hdmirx-0",
-					      "clk-m-pix-hdmirx-1";
-		};
-
-		/*
-		 * DDR PLL
-		 */
-		clockgen-ddr@0xfdde07d8 {
-			reg = <0xfdde07d8 0x110>;
-
-			clockgen_ddr_pll: clockgen-ddr-pll {
-				#clock-cells = <1>;
-				compatible = "st,stih416-plls-c32-ddr", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-				clock-output-names = "clockgen-ddr0",
-						     "clockgen-ddr1";
-			};
-		};
-
-		/*
-		 * GPU PLL
-		 */
-		clockgen-gpu@fd68ff00 {
-			reg = <0xfd68ff00 0x910>;
-
-			clockgen_gpu_pll: clockgen-gpu-pll {
-				#clock-cells = <1>;
-				compatible = "st,stih416-gpu-pll-c32", "st,clkgengpu-pll-c32";
-
-				clocks = <&clk_sysin>;
-				clock-output-names = "clockgen-gpu-pll";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi
deleted file mode 100644
index 9c97f7e6..0000000
--- a/arch/arm/boot/dts/stih416-pinctrl.dtsi
+++ /dev/null
@@ -1,692 +0,0 @@
-
-/*
- * Copyright (C) 2013 STMicroelectronics Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-#include "st-pincfg.h"
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-/ {
-
-	aliases {
-		gpio0	= &pio0;
-		gpio1	= &pio1;
-		gpio2	= &pio2;
-		gpio3	= &pio3;
-		gpio4	= &pio4;
-		gpio5	= &pio40;
-		gpio6	= &pio5;
-		gpio7	= &pio6;
-		gpio8	= &pio7;
-		gpio9	= &pio8;
-		gpio10	= &pio9;
-		gpio11	= &pio10;
-		gpio12	= &pio11;
-		gpio13	= &pio12;
-		gpio14	= &pio30;
-		gpio15	= &pio31;
-		gpio16	= &pio13;
-		gpio17	= &pio14;
-		gpio18	= &pio15;
-		gpio19	= &pio16;
-		gpio20	= &pio17;
-		gpio21	= &pio18;
-		gpio22	= &pio100;
-		gpio23	= &pio101;
-		gpio24	= &pio102;
-		gpio25	= &pio103;
-		gpio26	= &pio104;
-		gpio27	= &pio105;
-		gpio28	= &pio106;
-		gpio29	= &pio107;
-	};
-
-	soc {
-		pin-controller-sbc {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih416-sbc-pinctrl";
-			st,syscfg	= <&syscfg_sbc>;
-			reg 		= <0xfe61f080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges		= <0 0xfe610000 0x6000>;
-
-			pio0: gpio@fe610000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO0";
-			};
-			pio1: gpio@fe611000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO1";
-			};
-			pio2: gpio@fe612000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO2";
-			};
-			pio3: gpio@fe613000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x3000 0x100>;
-				st,bank-name	= "PIO3";
-			};
-			pio4: gpio@fe614000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x4000 0x100>;
-				st,bank-name	= "PIO4";
-			};
-			pio40: gpio@fe615000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x5000 0x100>;
-				st,bank-name	= "PIO40";
-				st,retime-pin-mask = <0x7f>;
-			};
-
-			rc{
-				pinctrl_ir: ir0 {
-					st,pins {
-						ir = <&pio4 0 ALT2 IN>;
-					};
-				};
-			};
-			sbc_serial1 {
-				pinctrl_sbc_serial1: sbc_serial1 {
-					st,pins {
-						tx	= <&pio2 6 ALT3 OUT>;
-						rx	= <&pio2 7 ALT3 IN>;
-					};
-				};
-			};
-
-			keyscan {
-				pinctrl_keyscan: keyscan {
-					st,pins {
-						keyin0 = <&pio0 2 ALT2 IN>;
-						keyin1 = <&pio0 3 ALT2 IN>;
-						keyin2 = <&pio0 4 ALT2 IN>;
-						keyin3 = <&pio2 6 ALT2 IN>;
-
-						keyout0 = <&pio1 6 ALT2 OUT>;
-						keyout1 = <&pio1 7 ALT2 OUT>;
-						keyout2 = <&pio0 6 ALT2 OUT>;
-						keyout3 = <&pio2 7 ALT2 OUT>;
-					};
-				};
-			};
-
-			sbc_i2c0 {
-				pinctrl_sbc_i2c0_default: sbc_i2c0-default {
-					st,pins {
-						sda = <&pio4 6 ALT1 BIDIR>;
-						scl = <&pio4 5 ALT1 BIDIR>;
-					};
-				};
-			};
-
-			usb {
-				pinctrl_usb3: usb3 {
-					st,pins {
-						oc-detect = <&pio40 0 ALT1 IN>;
-						pwr-enable = <&pio40 1 ALT1 OUT>;
-					};
-				};
-			};
-
-			sbc_i2c1 {
-				pinctrl_sbc_i2c1_default: sbc_i2c1-default {
-					st,pins {
-						sda = <&pio3 2 ALT2 BIDIR>;
-						scl = <&pio3 1 ALT2 BIDIR>;
-					};
-				};
-			};
-
-			gmac1 {
-				pinctrl_mii1: mii1 {
-					st,pins {
-						txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
-						col =   <&pio0 7 ALT1 IN BYPASS 1000>;
-
-						mdio =  <&pio1 0 ALT1 OUT BYPASS 1500>;
-						mdc =   <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
-						crs =   <&pio1 2 ALT1 IN BYPASS 1000>;
-						mdint = <&pio1 3 ALT1 IN BYPASS 0>;
-						rxd0 =  <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rxd1 =  <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rxd2 =  <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rxd3 =  <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-
-						rxdv =  <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
-						phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
-					};
-				};
-				pinctrl_rgmii1: rgmii1-0 {
-					st,pins {
-						txd0 =  <&pio0 0 ALT1 OUT DE_IO 500 CLK_A>;
-						txd1 =  <&pio0 1 ALT1 OUT DE_IO 500 CLK_A>;
-						txd2 =  <&pio0 2 ALT1 OUT DE_IO 500 CLK_A>;
-						txd3 =  <&pio0 3 ALT1 OUT DE_IO 500 CLK_A>;
-						txen =  <&pio0 5 ALT1 OUT DE_IO 0   CLK_A>;
-						txclk = <&pio0 6 ALT1 IN  NICLK 0   CLK_A>;
-
-						mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
-						mdc  = <&pio1 1 ALT1 OUT NICLK  0 CLK_A>;
-						rxd0 = <&pio1 4 ALT1 IN DE_IO 500 CLK_A>;
-						rxd1 = <&pio1 5 ALT1 IN DE_IO 500 CLK_A>;
-						rxd2 = <&pio1 6 ALT1 IN DE_IO 500 CLK_A>;
-						rxd3 = <&pio1 7 ALT1 IN DE_IO 500 CLK_A>;
-
-						rxdv   = <&pio2 0 ALT1 IN  DE_IO 500 CLK_A>;
-						rxclk  = <&pio2 2 ALT1 IN  NICLK 0   CLK_A>;
-						phyclk = <&pio2 3 ALT4 OUT NICLK 0   CLK_B>;
-
-						clk125= <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
-					};
-				};
-			};
-
-			pwm1 {
-				pinctrl_pwm1_chan0_default: pwm1-0-default {
-					st,pins {
-						pwm-out    = <&pio3 0 ALT1 OUT>;
-						pwm-capturein = <&pio3 2 ALT1 IN>;
-
-					};
-				};
-				pinctrl_pwm1_chan1_default: pwm1-1-default {
-					st,pins {
-						pwm-out    = <&pio4 4 ALT1 OUT>;
-						pwm-capturein = <&pio4 3 ALT1 IN>;
-					};
-				};
-				pinctrl_pwm1_chan2_default: pwm1-2-default {
-					st,pins {
-						pwm-out    = <&pio4 6 ALT3 OUT>;
-					};
-				};
-				pinctrl_pwm1_chan3_default: pwm1-3-default {
-					st,pins {
-						pwm-out    = <&pio4 7 ALT3 OUT>;
-					};
-				};
-			};
-		};
-
-		pin-controller-front {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih416-front-pinctrl";
-			st,syscfg	= <&syscfg_front>;
-			reg 		= <0xfee0f080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges		= <0 0xfee00000 0x10000>;
-
-			pio5: gpio@fee00000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO5";
-			};
-			pio6: gpio@fee01000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO6";
-			};
-			pio7: gpio@fee02000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO7";
-			};
-			pio8: gpio@fee03000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x3000 0x100>;
-				st,bank-name	= "PIO8";
-			};
-			pio9: gpio@fee04000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x4000 0x100>;
-				st,bank-name	= "PIO9";
-			};
-			pio10: gpio@fee05000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x5000 0x100>;
-				st,bank-name	= "PIO10";
-			};
-			pio11: gpio@fee06000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x6000 0x100>;
-				st,bank-name	= "PIO11";
-			};
-			pio12: gpio@fee07000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x7000 0x100>;
-				st,bank-name	= "PIO12";
-			};
-			pio30: gpio@fee08000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x8000 0x100>;
-				st,bank-name	= "PIO30";
-			};
-			pio31: gpio@fee09000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x9000 0x100>;
-				st,bank-name	= "PIO31";
-			};
-
-			pwm0 {
-				pinctrl_pwm0_chan0_default: pwm0-0-default {
-					st,pins {
-						pwm-out    = <&pio9 7 ALT2 OUT>;
-						pwm-capturein = <&pio9 6 ALT2 IN>;
-					};
-				};
-			};
-
-			serial2-oe {
-				pinctrl_serial2_oe: serial2-1 {
-					st,pins {
-						output-enable	= <&pio11 3 ALT2 OUT>;
-					};
-				};
-			};
-
-			i2c0 {
-				pinctrl_i2c0_default: i2c0-default {
-					st,pins {
-						sda = <&pio9 3 ALT1 BIDIR>;
-						scl = <&pio9 2 ALT1 BIDIR>;
-					};
-				};
-			};
-
-			usb {
-				pinctrl_usb0: usb0 {
-					st,pins {
-						oc-detect = <&pio9 4 ALT1 IN>;
-						pwr-enable = <&pio9 5 ALT1 OUT>;
-					};
-				};
-			};
-
-
-			i2c1 {
-				pinctrl_i2c1_default: i2c1-default {
-					st,pins {
-						sda = <&pio12 1 ALT1 BIDIR>;
-						scl = <&pio12 0 ALT1 BIDIR>;
-					};
-				};
-			};
-
-			fsm {
-				pinctrl_fsm: fsm {
-					st,pins {
-						spi-fsm-clk  = <&pio12 2 ALT1 OUT>;
-						spi-fsm-cs   = <&pio12 3 ALT1 OUT>;
-						spi-fsm-mosi = <&pio12 4 ALT1 OUT>;
-						spi-fsm-miso = <&pio12 5 ALT1 IN>;
-						spi-fsm-hol  = <&pio12 6 ALT1 OUT>;
-						spi-fsm-wp   = <&pio12 7 ALT1 OUT>;
-					};
-				};
-			};
-		};
-
-		pin-controller-rear {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih416-rear-pinctrl";
-			st,syscfg	= <&syscfg_rear>;
-			reg 		= <0xfe82f080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges 		= <0 0xfe820000 0x6000>;
-
-			pio13: gpio@fe820000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO13";
-			};
-			pio14: gpio@fe821000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO14";
-			};
-			pio15: gpio@fe822000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO15";
-			};
-			pio16: gpio@fe823000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x3000 0x100>;
-				st,bank-name	= "PIO16";
-			};
-			pio17: gpio@fe824000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x4000 0x100>;
-				st,bank-name	= "PIO17";
-			};
-			pio18: gpio@fe825000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x5000 0x100>;
-				st,bank-name	= "PIO18";
-				st,retime-pin-mask = <0xf>;
-			};
-
-			serial2 {
-				pinctrl_serial2: serial2-0 {
-					st,pins {
-						tx	= <&pio17 4 ALT2 OUT>;
-						rx	= <&pio17 5 ALT2 IN>;
-					};
-				};
-			};
-
-			gmac0 {
-				pinctrl_mii0: mii0 {
-					st,pins {
-						mdint = <&pio13 6 ALT2 IN  BYPASS      0>;
-						txen =  <&pio13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
-						txd0 =  <&pio14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
-						txd1 =  <&pio14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
-						txd2 =  <&pio14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
-						txd3 =  <&pio14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
-
-						txclk = <&pio15 0 ALT2 IN  NICLK       0 CLK_A>;
-						txer =  <&pio15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
-						crs = <&pio15 2 ALT2 IN  BYPASS 1000>;
-						col = <&pio15 3 ALT2 IN  BYPASS 1000>;
-						mdio= <&pio15 4 ALT2 OUT BYPASS 1500>;
-						mdc = <&pio15 5 ALT2 OUT NICLK  0    CLK_B>;
-
-						rxd0 =  <&pio16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-						rxd1 =  <&pio16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-						rxd2 =  <&pio16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-						rxd3 =  <&pio16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-						rxdv =  <&pio15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-						rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-						rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>;
-						phyclk = <&pio13 5 ALT2 OUT NICLK 0 CLK_B>;
-					};
-				};
-
-				pinctrl_gmii0: gmii0 {
-					st,pins {
-						};
-				};
-				pinctrl_rgmii0: rgmii0 {
-					st,pins {
-						 phyclk = <&pio13  5 ALT4 OUT NICLK 0 CLK_B>;
-						 txen = <&pio13 7 ALT2 OUT DE_IO 0 CLK_A>;
-						 txd0  = <&pio14 0 ALT2 OUT DE_IO 500 CLK_A>;
-						 txd1  = <&pio14 1 ALT2 OUT DE_IO 500 CLK_A>;
-						 txd2  = <&pio14 2 ALT2 OUT DE_IO 500 CLK_B>;
-						 txd3  = <&pio14 3 ALT2 OUT DE_IO 500 CLK_B>;
-						 txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>;
-
-						 mdio = <&pio15 4 ALT2 OUT BYPASS 0>;
-						 mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>;
-
-						 rxdv = <&pio15 6 ALT2 IN DE_IO 500 CLK_A>;
-						 rxd0 =<&pio16 0 ALT2 IN DE_IO	500 CLK_A>;
-						 rxd1 =<&pio16 1 ALT2 IN DE_IO	500 CLK_A>;
-						 rxd2 =<&pio16 2 ALT2 IN DE_IO	500 CLK_A>;
-						 rxd3  =<&pio16 3 ALT2 IN DE_IO 500 CLK_A>;
-						 rxclk =<&pio17 0 ALT2 IN NICLK 0 CLK_A>;
-
-						 clk125=<&pio17 6 ALT1 IN NICLK 0 CLK_A>;
-					};
-				};
-			};
-
-			mmc0 {
-				pinctrl_mmc0: mmc0 {
-					st,pins {
-						mmcclk  = <&pio13 4 ALT4 BIDIR_PU NICLK 0 CLK_B>;
-						data0   = <&pio14 4 ALT4 BIDIR_PU BYPASS 0>;
-						data1   = <&pio14 5 ALT4 BIDIR_PU BYPASS 0>;
-						data2   = <&pio14 6 ALT4 BIDIR_PU BYPASS 0>;
-						data3   = <&pio14 7 ALT4 BIDIR_PU BYPASS 0>;
-						cmd     = <&pio15 1 ALT4 BIDIR_PU BYPASS 0>;
-						wp      = <&pio15 3 ALT4 IN>;
-						data4   = <&pio16 4 ALT4 BIDIR_PU BYPASS 0>;
-						data5   = <&pio16 5 ALT4 BIDIR_PU BYPASS 0>;
-						data6   = <&pio16 6 ALT4 BIDIR_PU BYPASS 0>;
-						data7   = <&pio16 7 ALT4 BIDIR_PU BYPASS 0>;
-						pwr     = <&pio17 1 ALT4 OUT>;
-						cd      = <&pio17 2 ALT4 IN>;
-						led     = <&pio17 3 ALT4 OUT>;
-					};
-				};
-			};
-			mmc1 {
-				pinctrl_mmc1: mmc1 {
-					st,pins {
-						mmcclk  = <&pio15 0 ALT3 BIDIR_PU NICLK 0 CLK_B>;
-						data0   = <&pio13 7 ALT3 BIDIR_PU BYPASS 0>;
-						data1   = <&pio14 1 ALT3 BIDIR_PU BYPASS 0>;
-						data2   = <&pio14 2 ALT3 BIDIR_PU BYPASS 0>;
-						data3   = <&pio14 3 ALT3 BIDIR_PU BYPASS 0>;
-						cmd     = <&pio15 4 ALT3 BIDIR_PU BYPASS 0>;
-						data4   = <&pio15 6 ALT3 BIDIR_PU BYPASS 0>;
-						data5   = <&pio15 7 ALT3 BIDIR_PU BYPASS 0>;
-						data6   = <&pio16 0 ALT3 BIDIR_PU BYPASS 0>;
-						data7   = <&pio16 1 ALT3 BIDIR_PU BYPASS 0>;
-						pwr     = <&pio16 2 ALT3 OUT>;
-						nreset  = <&pio13 6 ALT3 OUT>;
-					};
-				};
-			};
-
-			usb {
-				pinctrl_usb1: usb1 {
-					st,pins {
-						oc-detect = <&pio18 0 ALT1 IN>;
-						pwr-enable = <&pio18 1 ALT1 OUT>;
-					};
-				};
-				pinctrl_usb2: usb2 {
-					st,pins {
-						oc-detect = <&pio18 2 ALT1 IN>;
-						pwr-enable = <&pio18 3 ALT1 OUT>;
-					};
-				};
-			};
-
-			pwm0 {
-				pinctrl_pwm0_chan1_default: pwm0-1-default {
-					st,pins {
-						pwm-out    = <&pio13 2 ALT2 OUT>;
-						pwm-capturein = <&pio13 1 ALT2 IN>;
-					};
-				};
-				pinctrl_pwm0_chan2_default: pwm0-2-default {
-					st,pins {
-						pwm-out    = <&pio15 2 ALT4 OUT>;
-					};
-				};
-				pinctrl_pwm0_chan3_default: pwm0-3-default {
-					st,pins {
-						pwm-out    = <&pio17 4 ALT1 OUT>;
-					};
-				};
-			};
-
-		};
-
-		pin-controller-fvdp-fe {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih416-fvdp-fe-pinctrl";
-			st,syscfg	= <&syscfg_fvdp_fe>;
-			reg 		= <0xfd6bf080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges		= <0 0xfd6b0000 0x3000>;
-
-			pio100: gpio@fd6b0000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO100";
-			};
-			pio101: gpio@fd6b1000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO101";
-			};
-			pio102: gpio@fd6b2000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO102";
-			};
-		};
-
-		pin-controller-fvdp-lite {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih416-fvdp-lite-pinctrl";
-			st,syscfg		= <&syscfg_fvdp_lite>;
-			reg 		= <0xfd33f080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges			= <0 0xfd330000 0x5000>;
-
-			pio103: gpio@fd330000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO103";
-			};
-			pio104: gpio@fd331000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO104";
-			};
-			pio105: gpio@fd332000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO105";
-			};
-			pio106: gpio@fd333000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x3000 0x100>;
-				st,bank-name	= "PIO106";
-			};
-
-			pio107: gpio@fd334000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x4000 0x100>;
-				st,bank-name	= "PIO107";
-				st,retime-pin-mask = <0xf>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
deleted file mode 100644
index fe1f9cf77..0000000
--- a/arch/arm/boot/dts/stih416.dtsi
+++ /dev/null
@@ -1,517 +0,0 @@
-/*
- * Copyright (C) 2012 STMicroelectronics Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-#include "stih41x.dtsi"
-#include "stih416-clock.dtsi"
-#include "stih416-pinctrl.dtsi"
-
-#include <dt-bindings/phy/phy.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/reset/stih416-resets.h>
-#include <dt-bindings/interrupt-controller/irq-st.h>
-/ {
-	L2: cache-controller {
-		compatible = "arm,pl310-cache";
-		reg = <0xfffe2000 0x1000>;
-		arm,data-latency = <3 3 3>;
-		arm,tag-latency = <2 2 2>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	arm-pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupt-parent = <&intc>;
-		interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupt-parent = <&intc>;
-		ranges;
-		compatible	= "simple-bus";
-
-		restart {
-			compatible = "st,stih416-restart";
-			st,syscfg = <&syscfg_sbc>;
-			status = "okay";
-		};
-
-		powerdown: powerdown-controller {
-			#reset-cells = <1>;
-			compatible = "st,stih416-powerdown";
-		};
-
-		softreset: softreset-controller {
-			#reset-cells = <1>;
-			compatible = "st,stih416-softreset";
-		};
-
-		syscfg_sbc:sbc-syscfg@fe600000{
-			compatible	= "st,stih416-sbc-syscfg", "syscon";
-			reg		= <0xfe600000 0x1000>;
-		};
-
-		syscfg_front:front-syscfg@fee10000{
-			compatible	= "st,stih416-front-syscfg", "syscon";
-			reg		= <0xfee10000 0x1000>;
-		};
-
-		syscfg_rear:rear-syscfg@fe830000{
-			compatible	= "st,stih416-rear-syscfg", "syscon";
-			reg		= <0xfe830000 0x1000>;
-		};
-
-		/* MPE */
-		syscfg_fvdp_fe:fvdp-fe-syscfg@fddf0000{
-			compatible	= "st,stih416-fvdp-fe-syscfg", "syscon";
-			reg		= <0xfddf0000 0x1000>;
-		};
-
-		syscfg_fvdp_lite:fvdp-lite-syscfg@fd6a0000{
-			compatible	= "st,stih416-fvdp-lite-syscfg", "syscon";
-			reg		= <0xfd6a0000 0x1000>;
-		};
-
-		syscfg_cpu:cpu-syscfg@fdde0000{
-			compatible	= "st,stih416-cpu-syscfg", "syscon";
-			reg		= <0xfdde0000 0x1000>;
-		};
-
-		syscfg_compo:compo-syscfg@fd320000{
-			compatible	= "st,stih416-compo-syscfg", "syscon";
-			reg		= <0xfd320000 0x1000>;
-		};
-
-		syscfg_transport:transport-syscfg@fd690000{
-			compatible	= "st,stih416-transport-syscfg", "syscon";
-			reg		= <0xfd690000 0x1000>;
-		};
-
-		syscfg_lpm:lpm-syscfg@fe4b5100{
-			compatible	= "st,stih416-lpm-syscfg", "syscon";
-			reg		= <0xfe4b5100 0x8>;
-		};
-
-		irq-syscfg {
-			compatible    = "st,stih416-irq-syscfg";
-			st,syscfg     = <&syscfg_cpu>;
-			st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
-					<ST_IRQ_SYSCFG_PMU_1>;
-			st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
-					<ST_IRQ_SYSCFG_DISABLED>;
-		};
-
-		serial2: serial@fed32000{
-			compatible	= "st,asc";
-			status 		= "disabled";
-			reg		= <0xfed32000 0x2c>;
-			interrupts	= <0 197 0>;
-			clocks 		= <&clk_s_a0_ls CLK_ICN_REG>;
-			pinctrl-names 	= "default";
-			pinctrl-0 	= <&pinctrl_serial2 &pinctrl_serial2_oe>;
-		};
-
-		/* SBC_UART1 */
-		sbc_serial1: serial@fe531000 {
-			compatible	= "st,asc";
-			status 		= "disabled";
-			reg		= <0xfe531000 0x2c>;
-			interrupts	= <0 210 0>;
-			pinctrl-names 	= "default";
-			pinctrl-0 	= <&pinctrl_sbc_serial1>;
-			clocks		= <&clk_sysin>;
-		};
-
-		i2c@fed40000 {
-			compatible	= "st,comms-ssc4-i2c";
-			reg		= <0xfed40000 0x110>;
-			interrupts	= <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
-			clocks 		= <&clk_s_a0_ls CLK_ICN_REG>;
-			clock-names	= "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_i2c0_default>;
-
-			status		= "disabled";
-		};
-
-		i2c@fed41000 {
-			compatible	= "st,comms-ssc4-i2c";
-			reg		= <0xfed41000 0x110>;
-			interrupts	= <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-			clocks 		= <&clk_s_a0_ls CLK_ICN_REG>;
-			clock-names	= "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_i2c1_default>;
-
-			status		= "disabled";
-		};
-
-		i2c@fe540000 {
-			compatible	= "st,comms-ssc4-i2c";
-			reg		= <0xfe540000 0x110>;
-			interrupts	= <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
-			clocks		= <&clk_sysin>;
-			clock-names	= "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_sbc_i2c0_default>;
-
-			status		= "disabled";
-		};
-
-		i2c@fe541000 {
-			compatible	= "st,comms-ssc4-i2c";
-			reg		= <0xfe541000 0x110>;
-			interrupts	= <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
-			clocks		= <&clk_sysin>;
-			clock-names	= "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_sbc_i2c1_default>;
-
-			status		= "disabled";
-		};
-
-		ethernet0: dwmac@fe810000 {
-			device_type 	= "network";
-			compatible	= "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710";
-			status 		= "disabled";
-			reg		= <0xfe810000 0x8000>;
-			reg-names	= "stmmaceth";
-
-			interrupts = <0 133 0>, <0 134 0>, <0 135 0>;
-			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
-
-			snps,pbl 	= <32>;
-			snps,mixed-burst;
-
-			st,syscon		= <&syscfg_rear 0x8bc>;
-			resets			= <&softreset STIH416_ETH0_SOFTRESET>;
-			reset-names		= "stmmaceth";
-			pinctrl-names 	= "default";
-			pinctrl-0	= <&pinctrl_mii0>;
-			clock-names	= "stmmaceth", "sti-ethclk";
-			clocks		= <&clk_s_a1_ls CLK_ICN_IF_2>, <&clk_s_a1_ls CLK_GMAC0_PHY>;
-		};
-
-		ethernet1: dwmac@fef08000 {
-			device_type = "network";
-			compatible		= "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710";
-			status 		= "disabled";
-			reg		= <0xfef08000 0x8000>;
-			reg-names	= "stmmaceth";
-			interrupts = <0 136 0>, <0 137 0>, <0 138 0>;
-			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
-
-			snps,pbl	= <32>;
-			snps,mixed-burst;
-
-			st,syscon	= <&syscfg_sbc 0x7f0>;
-
-			resets		= <&softreset STIH416_ETH1_SOFTRESET>;
-			reset-names	= "stmmaceth";
-			pinctrl-names 	= "default";
-			pinctrl-0	= <&pinctrl_mii1>;
-			clock-names	= "stmmaceth", "sti-ethclk";
-			clocks		= <&clk_s_a0_ls CLK_ICN_REG>, <&clk_s_a0_ls CLK_ETH1_PHY>;
-		};
-
-		rc: rc@fe518000 {
-			compatible	= "st,comms-irb";
-			reg		= <0xfe518000 0x234>;
-			interrupts	=  <0 203 0>;
-			rx-mode         = "infrared";
-			clocks		= <&clk_sysin>;
-			pinctrl-names 	= "default";
-			pinctrl-0	= <&pinctrl_ir>;
-			resets		= <&softreset STIH416_IRB_SOFTRESET>;
-		};
-
-		/* FSM */
-		spifsm: spifsm@fe902000 {
-			compatible	   = "st,spi-fsm";
-			reg		   = <0xfe902000 0x1000>;
-			pinctrl-0	   = <&pinctrl_fsm>;
-
-			st,syscfg	   = <&syscfg_rear>;
-			st,boot-device-reg = <0x958>;
-			st,boot-device-spi = <0x1a>;
-
-			status = "disabled";
-		};
-
-		keyscan: keyscan@fe4b0000 {
-			compatible = "st,sti-keyscan";
-			status = "disabled";
-			reg = <0xfe4b0000 0x2000>;
-			interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>;
-			clocks = <&clk_sysin>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_keyscan>;
-			resets	= <&powerdown STIH416_KEYSCAN_POWERDOWN>,
-				  <&softreset STIH416_KEYSCAN_SOFTRESET>;
-		};
-
-		temp0 {
-			compatible = "st,stih416-sas-thermal";
-			clock-names = "thermal";
-			clocks = <&clockgen_c_vcc 14>;
-
-			status = "okay";
-		};
-
-		temp1@fdfe8000 {
-			compatible = "st,stih416-mpe-thermal";
-			reg = <0xfdfe8000 0x10>;
-			clocks = <&clockgen_e 3>;
-			clock-names = "thermal";
-			interrupts = <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>;
-
-			status = "okay";
-		};
-
-		mmc0: sdhci@fe81e000 {
-			compatible	= "st,sdhci";
-			status		= "disabled";
-			reg		= <0xfe81e000 0x1000>;
-			interrupts	= <GIC_SPI 127 IRQ_TYPE_NONE>;
-			interrupt-names	= "mmcirq";
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_mmc0>;
-			clock-names	= "mmc";
-			clocks		= <&clk_s_a1_ls 1>;
-		};
-
-		mmc1: sdhci@fe81f000 {
-			compatible	= "st,sdhci";
-			status		= "disabled";
-			reg		= <0xfe81f000 0x1000>;
-			interrupts	= <GIC_SPI 128 IRQ_TYPE_NONE>;
-			interrupt-names	= "mmcirq";
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_mmc1>;
-			clock-names	= "mmc";
-			clocks		= <&clk_s_a1_ls 8>;
-		};
-
-		miphy365x_phy: phy@fe382000 {
-			compatible      = "st,miphy365x-phy";
-			st,syscfg	= <&syscfg_rear 0x824 0x828>;
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			ranges;
-
-			phy_port0: port@fe382000 {
-				#phy-cells = <1>;
-				reg = <0xfe382000 0x100>, <0xfe394000 0x100>;
-				reg-names = "sata", "pcie";
-			};
-
-			phy_port1: port@fe38a000 {
-				#phy-cells = <1>;
-				reg = <0xfe38a000 0x100>, <0xfe804000 0x100>;
-				reg-names = "sata", "pcie";
-			};
-		};
-
-		sata0: sata@fe380000 {
-			compatible      = "st,sti-ahci";
-			reg             = <0xfe380000 0x1000>;
-			interrupts      = <GIC_SPI 157 IRQ_TYPE_NONE>;
-			interrupt-names = "hostc";
-			phys	        = <&phy_port0 PHY_TYPE_SATA>;
-			phy-names       = "sata-phy";
-			resets	        = <&powerdown STIH416_SATA0_POWERDOWN>,
-					  <&softreset STIH416_SATA0_SOFTRESET>;
-			reset-names     = "pwr-dwn", "sw-rst";
-			clock-names     = "ahci_clk";
-			clocks	        = <&clk_s_a0_ls CLK_ICN_REG>;
-
-			status	        = "disabled";
-		};
-
-		usb2_phy: phy@0 {
-			compatible = "st,stih416-usb-phy";
-			#phy-cells = <0>;
-			st,syscfg = <&syscfg_rear>;
-			clocks = <&clk_sysin>;
-			clock-names = "osc_phy";
-		};
-
-		ehci0: usb@fe1ffe00 {
-			compatible = "st,st-ehci-300x";
-			reg = <0xfe1ffe00 0x100>;
-			interrupts = <GIC_SPI 148 IRQ_TYPE_NONE>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb0>;
-			clocks = <&clk_s_a1_ls 0>,
-				 <&clockgen_b0 0>;
-			clock-names = "ic", "clk48";
-			phys = <&usb2_phy>;
-			phy-names = "usb";
-			resets = <&powerdown STIH416_USB0_POWERDOWN>,
-				 <&softreset STIH416_USB0_SOFTRESET>;
-			reset-names = "power", "softreset";
-		};
-
-		ohci0: usb@fe1ffc00 {
-			compatible = "st,st-ohci-300x";
-			reg = <0xfe1ffc00 0x100>;
-			interrupts = <GIC_SPI 149 IRQ_TYPE_NONE>;
-			clocks = <&clk_s_a1_ls 0>,
-				 <&clockgen_b0 0>;
-			clock-names = "ic", "clk48";
-			phys = <&usb2_phy>;
-			phy-names = "usb";
-			status = "okay";
-			resets = <&powerdown STIH416_USB0_POWERDOWN>,
-				 <&softreset STIH416_USB0_SOFTRESET>;
-			reset-names = "power", "softreset";
-		};
-
-		ehci1: usb@fe203e00 {
-			compatible = "st,st-ehci-300x";
-			reg = <0xfe203e00 0x100>;
-			interrupts = <GIC_SPI 150 IRQ_TYPE_NONE>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb1>;
-			clocks = <&clk_s_a1_ls 0>,
-				 <&clockgen_b0 0>;
-			clock-names = "ic", "clk48";
-			phys = <&usb2_phy>;
-			phy-names = "usb";
-			resets = <&powerdown STIH416_USB1_POWERDOWN>,
-				 <&softreset STIH416_USB1_SOFTRESET>;
-			reset-names = "power", "softreset";
-		};
-
-		ohci1: usb@fe203c00 {
-			compatible = "st,st-ohci-300x";
-			reg = <0xfe203c00 0x100>;
-			interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
-			clocks = <&clk_s_a1_ls 0>,
-				 <&clockgen_b0 0>;
-			clock-names = "ic", "clk48";
-			phys = <&usb2_phy>;
-			phy-names = "usb";
-			resets = <&powerdown STIH416_USB1_POWERDOWN>,
-				 <&softreset STIH416_USB1_SOFTRESET>;
-			reset-names = "power", "softreset";
-		};
-
-		ehci2: usb@fe303e00 {
-			compatible = "st,st-ehci-300x";
-			reg = <0xfe303e00 0x100>;
-			interrupts = <GIC_SPI 152 IRQ_TYPE_NONE>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb2>;
-			clocks = <&clk_s_a1_ls 0>,
-				 <&clockgen_b0 0>;
-			clock-names = "ic", "clk48";
-			phys = <&usb2_phy>;
-			phy-names = "usb";
-			resets = <&powerdown STIH416_USB2_POWERDOWN>,
-				 <&softreset STIH416_USB2_SOFTRESET>;
-			reset-names = "power", "softreset";
-		};
-
-		ohci2: usb@fe303c00 {
-			compatible = "st,st-ohci-300x";
-			reg = <0xfe303c00 0x100>;
-			interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
-			clocks = <&clk_s_a1_ls 0>,
-				 <&clockgen_b0 0>;
-			clock-names = "ic", "clk48";
-			phys = <&usb2_phy>;
-			phy-names = "usb";
-			resets = <&powerdown STIH416_USB2_POWERDOWN>,
-				 <&softreset STIH416_USB2_SOFTRESET>;
-			reset-names = "power", "softreset";
-		};
-
-		ehci3: usb@fe343e00 {
-			compatible = "st,st-ehci-300x";
-			reg = <0xfe343e00 0x100>;
-			interrupts = <GIC_SPI 154 IRQ_TYPE_NONE>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb3>;
-			clocks = <&clk_s_a1_ls 0>,
-				 <&clockgen_b0 0>;
-			clock-names = "ic", "clk48";
-			phys = <&usb2_phy>;
-			phy-names = "usb";
-			resets = <&powerdown STIH416_USB3_POWERDOWN>,
-				 <&softreset STIH416_USB3_SOFTRESET>;
-			reset-names = "power", "softreset";
-		};
-
-		ohci3: usb@fe343c00 {
-			compatible = "st,st-ohci-300x";
-			reg = <0xfe343c00 0x100>;
-			interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>;
-			clocks = <&clk_s_a1_ls 0>,
-				 <&clockgen_b0 0>;
-			clock-names = "ic", "clk48";
-			phys = <&usb2_phy>;
-			phy-names = "usb";
-			resets = <&powerdown STIH416_USB3_POWERDOWN>,
-				 <&softreset STIH416_USB3_SOFTRESET>;
-			reset-names = "power", "softreset";
-		};
-
-		/* SAS PWM Module */
-		pwm0: pwm@fed10000 {
-			compatible	= "st,sti-pwm";
-			status		= "disabled";
-			#pwm-cells	= <2>;
-			reg		= <0xfed10000 0x68>;
-			interrupts      = <GIC_SPI 200 IRQ_TYPE_NONE>;
-
-			pinctrl-names	= "default";
-			pinctrl-0 = 	<&pinctrl_pwm0_chan0_default
-					&pinctrl_pwm0_chan1_default
-					&pinctrl_pwm0_chan2_default
-					&pinctrl_pwm0_chan3_default>;
-
-			clock-names	= "pwm", "capture";
-			clocks		= <&clk_sysin>, <&clk_s_a0_ls CLK_ICN_REG>;
-
-			st,pwm-num-chan = <4>;
-			st,capture-num-chan = <2>;
-		};
-
-		/* SBC PWM Module */
-		pwm1: pwm@fe510000 {
-			compatible	= "st,sti-pwm";
-			status		= "disabled";
-			#pwm-cells	= <2>;
-			reg		= <0xfe510000 0x68>;
-			interrupts      = <GIC_SPI 202 IRQ_TYPE_NONE>;
-
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_pwm1_chan0_default
-					/*
-					 * Shared with SBC_OBS_NOTRST.  Don't
-					 * enable unless you really know what
-					 * you're doing.
-					 *
-					 * &pinctrl_pwm1_chan1_default
-					 */
-					&pinctrl_pwm1_chan2_default
-					&pinctrl_pwm1_chan3_default>;
-
-			clock-names	= "pwm";
-			clocks		= <&clk_sysin>;
-			st,pwm-num-chan = <3>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/stih41x-b2000.dtsi b/arch/arm/boot/dts/stih41x-b2000.dtsi
deleted file mode 100644
index 9bfa067..0000000
--- a/arch/arm/boot/dts/stih41x-b2000.dtsi
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-
-	memory{
-		device_type = "memory";
-		reg = <0x60000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyAS0,115200 clk_ignore_unused";
-		linux,stdout-path = &serial2;
-	};
-
-	aliases {
-		ttyAS0 = &serial2;
-		ethernet0 = &ethernet0;
-		ethernet1 = &ethernet1;
-	};
-
-	soc {
-		serial2: serial@fed32000 {
-			status = "okay";
-		};
-
-		leds {
-			compatible	= "gpio-leds";
-			fp_led {
-				label	= "Front Panel LED";
-				gpios	= <&pio105 7 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger	= "heartbeat";
-			};
-		};
-
-		/* HDMI Tx I2C */
-		i2c@fed41000 {
-			/* HDMI V1.3a supports Standard mode only */
-			clock-frequency = <100000>;
-			i2c-min-scl-pulse-width-us = <0>;
-			i2c-min-sda-pulse-width-us = <5>;
-
-			status = "okay";
-		};
-
-		ethernet0: dwmac@fe810000 {
-			status			= "okay";
-			phy-mode		= "mii";
-			pinctrl-0		= <&pinctrl_mii0>;
-
-			snps,reset-gpio 	= <&pio106 2>;
-			snps,reset-active-low;
-			snps,reset-delays-us 	= <0 10000 10000>;
-		};
-
-		ethernet1: dwmac@fef08000 {
-			status			= "disabled";
-			phy-mode		= "mii";
-			st,tx-retime-src	= "txclk";
-
-			snps,reset-gpio 	= <&pio4 7>;
-			snps,reset-active-low;
-			snps,reset-delays-us 	= <0 10000 10000>;
-		};
-
-		keyscan: keyscan@fe4b0000 {
-			keypad,num-rows = <4>;
-			keypad,num-columns = <4>;
-			st,debounce-us = <5000>;
-			linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_F13)
-					 MATRIX_KEY(0x00, 0x01, KEY_F9)
-					 MATRIX_KEY(0x00, 0x02, KEY_F5)
-					 MATRIX_KEY(0x00, 0x03, KEY_F1)
-					 MATRIX_KEY(0x01, 0x00, KEY_F14)
-					 MATRIX_KEY(0x01, 0x01, KEY_F10)
-					 MATRIX_KEY(0x01, 0x02, KEY_F6)
-					 MATRIX_KEY(0x01, 0x03, KEY_F2)
-					 MATRIX_KEY(0x02, 0x00, KEY_F15)
-					 MATRIX_KEY(0x02, 0x01, KEY_F11)
-					 MATRIX_KEY(0x02, 0x02, KEY_F7)
-					 MATRIX_KEY(0x02, 0x03, KEY_F3)
-					 MATRIX_KEY(0x03, 0x00, KEY_F16)
-					 MATRIX_KEY(0x03, 0x01, KEY_F12)
-					 MATRIX_KEY(0x03, 0x02, KEY_F8)
-					 MATRIX_KEY(0x03, 0x03, KEY_F4) >;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/stih41x-b2020.dtsi b/arch/arm/boot/dts/stih41x-b2020.dtsi
deleted file mode 100644
index 322e0e9..0000000
--- a/arch/arm/boot/dts/stih41x-b2020.dtsi
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-#include "stih41x-b2020x.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-/ {
-	memory{
-		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyAS0,115200 clk_ignore_unused";
-		linux,stdout-path = &sbc_serial1;
-	};
-
-	aliases {
-		ttyAS0 = &sbc_serial1;
-		ethernet1 = &ethernet1;
-	};
-	soc {
-		sbc_serial1: serial@fe531000 {
-			status = "okay";
-		};
-
-		leds {
-			compatible	= "gpio-leds";
-			red {
-				label	= "Front Panel LED";
-				gpios	= <&pio4 1 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger	= "heartbeat";
-			};
-			green {
-				gpios	= <&pio4 7 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-		};
-
-		i2c@fed40000 {
-			status = "okay";
-		};
-
-		/* HDMI Tx I2C */
-		i2c@fed41000 {
-			/* HDMI V1.3a supports Standard mode only */
-			clock-frequency = <100000>;
-			i2c-min-scl-pulse-width-us = <0>;
-			i2c-min-sda-pulse-width-us = <5>;
-
-			status = "okay";
-		};
-
-		i2c@fe540000 {
-			status = "okay";
-		};
-
-		i2c@fe541000 {
-			status = "okay";
-		};
-
-		ethernet1: dwmac@fef08000 {
-			status			= "okay";
-			phy-mode		= "rgmii-id";
-			max-speed		= <1000>;
-			st,tx-retime-src	= "clk_125";
-			snps,reset-gpio 	= <&pio3 0>;
-			snps,reset-active-low;
-			snps,reset-delays-us 	= <0 10000 10000>;
-
-			pinctrl-0	= <&pinctrl_rgmii1>;
-		};
-
-		mmc0: sdhci@fe81e000 {
-			bus-width = <8>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/stih41x-b2020x.dtsi b/arch/arm/boot/dts/stih41x-b2020x.dtsi
deleted file mode 100644
index f797a06..0000000
--- a/arch/arm/boot/dts/stih41x-b2020x.dtsi
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
- * Author: Lee Jones <lee.jones@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-/ {
-	soc {
-		mmc0: sdhci@fe81e000 {
-			status = "okay";
-		};
-
-		spifsm: spifsm@fe902000 {
-			#address-cells = <1>;
-			#size-cells    = <1>;
-
-			status = "okay";
-
-			partition@0 {
-				label = "SerialFlash1";
-				reg   = <0x00000000 0x00500000>;
-			};
-
-			partition@500000 {
-				label = "SerialFlash2";
-				reg   = <0x00500000 0x00b00000>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/stih41x.dtsi b/arch/arm/boot/dts/stih41x.dtsi
deleted file mode 100644
index 5cb0e63..0000000
--- a/arch/arm/boot/dts/stih41x.dtsi
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Copyright (C) 2014 STMicroelectronics Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-		};
-	};
-
-	intc: interrupt-controller@fffe1000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0xfffe1000 0x1000>,
-		      <0xfffe0100 0x100>;
-	};
-
-	scu@fffe0000 {
-		compatible = "arm,cortex-a9-scu";
-		reg = <0xfffe0000 0x1000>;
-	};
-
-	timer@fffe0200 {
-		interrupt-parent = <&intc>;
-		compatible = "arm,cortex-a9-global-timer";
-		reg = <0xfffe0200 0x100>;
-		interrupts = <1 11 0x04>;
-		clocks = <&arm_periph_clk>;
-	};
-};
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index ed2b7a9..4b8f62f 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -135,6 +135,10 @@
 			};
 		};
 
+		sti_uni_player0: sti-uni-player@8d80000 {
+			status = "okay";
+		};
+
 		sti_uni_player2: sti-uni-player@8d82000 {
 			status = "okay";
 		};
@@ -151,13 +155,26 @@
 
 		sound {
 			compatible = "simple-audio-card";
-			simple-audio-card,name = "sti audio card";
+			simple-audio-card,name = "STI-B2120";
 			status = "okay";
 
 			simple-audio-card,dai-link@0 {
+				/* HDMI */
+				format = "i2s";
+				mclk-fs = <128>;
+				cpu {
+					sound-dai = <&sti_uni_player0>;
+				};
+
+				codec {
+					sound-dai = <&sti_hdmi>;
+				};
+			};
+			simple-audio-card,dai-link@1 {
 				/* DAC */
 				format = "i2s";
 				mclk-fs = <256>;
+				frame-inversion = <1>;
 				cpu {
 					sound-dai = <&sti_uni_player2>;
 				};
@@ -166,7 +183,7 @@
 					sound-dai = <&sti_sasg_codec 1>;
 				};
 			};
-			simple-audio-card,dai-link@1 {
+			simple-audio-card,dai-link@2 {
 				/* SPDIF */
 				format = "left_j";
 				mclk-fs = <128>;
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index 6bfc595..5436e88 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -47,6 +47,7 @@
 
 /dts-v1/;
 #include "stm32f429.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "STMicroelectronics STM32429i-EVAL board";
@@ -65,6 +66,10 @@
 		serial0 = &usart1;
 	};
 
+	soc {
+		dma-ranges = <0xc0000000 0x0 0x10000000>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		green {
@@ -82,6 +87,23 @@
 		};
 	};
 
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+		button@0 {
+			label = "Wake up";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpioa 0 0>;
+		};
+		button@1 {
+			label = "Tamper";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpioc 13 0>;
+		};
+	};
+
 	usbotg_hs_phy: usbphy {
 		#phy-cells = <0>;
 		compatible = "usb-nop-xceiv";
@@ -94,11 +116,12 @@
 	clock-frequency = <25000000>;
 };
 
-&ethernet0 {
+&mac {
 	status = "okay";
-	pinctrl-0	= <&ethernet0_mii>;
+	pinctrl-0	= <&ethernet_mii>;
 	pinctrl-names	= "default";
-	phy-mode	= "mii-id";
+	phy-mode	= "mii";
+	phy-handle	= <&phy1>;
 	mdio0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts
new file mode 100644
index 0000000..aa03fac
--- /dev/null
+++ b/arch/arm/boot/dts/stm32746g-eval.dts
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f746.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "STMicroelectronics STM32746g-EVAL board";
+	compatible = "st,stm32746g-eval", "st,stm32f746";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0xc0000000 0x2000000>;
+	};
+
+	aliases {
+		serial0 = &usart1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		green {
+			gpios = <&gpiof 10 1>;
+			linux,default-trigger = "heartbeat";
+		};
+		red {
+			gpios = <&gpiob 7 1>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+		button@0 {
+			label = "Wake up";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpioc 13 0>;
+		};
+	};
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&usart1 {
+	pinctrl-0 = <&usart1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
index 0140807..7d0415e 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -47,6 +47,7 @@
 
 /dts-v1/;
 #include "stm32f429.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "STMicroelectronics STM32F429i-DISCO board";
@@ -75,6 +76,18 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+		button@0 {
+			label = "User";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpioa 0 0>;
+		};
+	};
 };
 
 &clk_hse {
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 336ee4f..e4dae0e 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -56,11 +56,21 @@
 			compatible = "fixed-clock";
 			clock-frequency = <0>;
 		};
+
+		clk-lse {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		clk-lsi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+		};
 	};
 
 	soc {
-		dma-ranges = <0xc0000000 0x0 0x10000000>;
-
 		timer2: timer@40000000 {
 			compatible = "st,stm32-timer";
 			reg = <0x40000000 0x400>;
@@ -122,6 +132,9 @@
 			interrupts = <39>;
 			clocks = <&rcc 0 146>;
 			status = "disabled";
+			dmas = <&dma1 1 4 0x400 0x0>,
+			       <&dma1 3 4 0x400 0x0>;
+			dma-names = "rx", "tx";
 		};
 
 		usart4: serial@40004c00 {
@@ -162,6 +175,9 @@
 			interrupts = <37>;
 			clocks = <&rcc 0 164>;
 			status = "disabled";
+			dmas = <&dma2 2 4 0x400 0x0>,
+			       <&dma2 7 4 0x400 0x0>;
+			dma-names = "rx", "tx";
 		};
 
 		usart6: serial@40011400 {
@@ -185,11 +201,18 @@
 			interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
 		};
 
+		pwrcfg: power-config@40007000 {
+			compatible = "syscon";
+			reg = <0x40007000 0x400>;
+		};
+
 		pin-controller {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "st,stm32f429-pinctrl";
 			ranges = <0 0x40020000 0x3000>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&syscfg 0x8>;
 			pins-are-numbered;
 
 			gpioa: gpio@40020000 {
@@ -313,7 +336,7 @@
 				};
 			};
 
-			ethernet0_mii: mii@0 {
+			ethernet_mii: mii@0 {
 				pins {
 					pinmux = <STM32F429_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
 						 <STM32F429_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
@@ -340,6 +363,7 @@
 			compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
 			reg = <0x40023800 0x400>;
 			clocks = <&clk_hse>;
+			st,syscfg = <&pwrcfg>;
 		};
 
 		dma1: dma-controller@40026000 {
@@ -373,24 +397,22 @@
 			st,mem2mem;
 		};
 
-		ethernet0: dwmac@40028000 {
+		mac: ethernet@40028000 {
 			compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
 			reg = <0x40028000 0x8000>;
 			reg-names = "stmmaceth";
-			interrupts = <61>, <62>;
-			interrupt-names = "macirq", "eth_wake_irq";
-			clock-names = "stmmaceth", "tx-clk", "rx-clk";
+			interrupts = <61>;
+			interrupt-names = "macirq";
+			clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
 			clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
 			st,syscon = <&syscfg 0x4>;
 			snps,pbl = <8>;
 			snps,mixed-burst;
-			dma-ranges;
 			status = "disabled";
 		};
 
 		usbotg_hs: usb@40040000 {
 			compatible = "snps,dwc2";
-			dma-ranges;
 			reg = <0x40040000 0x40000>;
 			interrupts = <77>;
 			clocks = <&rcc 0 29>;
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index e911af8..8877c00 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -64,6 +64,14 @@
 	aliases {
 		serial0 = &usart3;
 	};
+
+	soc {
+		dma-ranges = <0xc0000000 0x0 0x10000000>;
+	};
+};
+
+&rcc {
+	compatible = "st,stm32f469-rcc", "st,stm32f42xx-rcc", "st,stm32-rcc";
 };
 
 &clk_hse {
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
new file mode 100644
index 0000000..f321ffe
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -0,0 +1,304 @@
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+#include "armv7-m.dtsi"
+#include <dt-bindings/pinctrl/stm32f746-pinfunc.h>
+
+/ {
+	clocks {
+		clk_hse: clk-hse {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+	};
+
+	soc {
+		timer2: timer@40000000 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000000 0x400>;
+			interrupts = <28>;
+			clocks = <&rcc 0 128>;
+			status = "disabled";
+		};
+
+		timer3: timer@40000400 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000400 0x400>;
+			interrupts = <29>;
+			clocks = <&rcc 0 129>;
+			status = "disabled";
+		};
+
+		timer4: timer@40000800 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000800 0x400>;
+			interrupts = <30>;
+			clocks = <&rcc 0 130>;
+			status = "disabled";
+		};
+
+		timer5: timer@40000c00 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000c00 0x400>;
+			interrupts = <50>;
+			clocks = <&rcc 0 131>;
+		};
+
+		timer6: timer@40001000 {
+			compatible = "st,stm32-timer";
+			reg = <0x40001000 0x400>;
+			interrupts = <54>;
+			clocks = <&rcc 0 132>;
+			status = "disabled";
+		};
+
+		timer7: timer@40001400 {
+			compatible = "st,stm32-timer";
+			reg = <0x40001400 0x400>;
+			interrupts = <55>;
+			clocks = <&rcc 0 133>;
+			status = "disabled";
+		};
+
+		usart2: serial@40004400 {
+			compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+			reg = <0x40004400 0x400>;
+			interrupts = <38>;
+			clocks =  <&rcc 0 145>;
+			status = "disabled";
+		};
+
+		usart3: serial@40004800 {
+			compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+			reg = <0x40004800 0x400>;
+			interrupts = <39>;
+			clocks = <&rcc 0 146>;
+			status = "disabled";
+		};
+
+		usart4: serial@40004c00 {
+			compatible = "st,stm32f7-uart";
+			reg = <0x40004c00 0x400>;
+			interrupts = <52>;
+			clocks = <&rcc 0 147>;
+			status = "disabled";
+		};
+
+		usart5: serial@40005000 {
+			compatible = "st,stm32f7-uart";
+			reg = <0x40005000 0x400>;
+			interrupts = <53>;
+			clocks = <&rcc 0 148>;
+			status = "disabled";
+		};
+
+		usart7: serial@40007800 {
+			compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+			reg = <0x40007800 0x400>;
+			interrupts = <82>;
+			clocks = <&rcc 0 158>;
+			status = "disabled";
+		};
+
+		usart8: serial@40007c00 {
+			compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+			reg = <0x40007c00 0x400>;
+			interrupts = <83>;
+			clocks = <&rcc 0 159>;
+			status = "disabled";
+		};
+
+		usart1: serial@40011000 {
+			compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+			reg = <0x40011000 0x400>;
+			interrupts = <37>;
+			clocks = <&rcc 0 164>;
+			status = "disabled";
+		};
+
+		usart6: serial@40011400 {
+			compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+			reg = <0x40011400 0x400>;
+			interrupts = <71>;
+			clocks = <&rcc 0 165>;
+			status = "disabled";
+		};
+
+		syscfg: system-config@40013800 {
+			compatible = "syscon";
+			reg = <0x40013800 0x400>;
+		};
+
+		exti: interrupt-controller@40013c00 {
+			compatible = "st,stm32-exti";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x40013C00 0x400>;
+			interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
+		};
+
+		pin-controller {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32f746-pinctrl";
+			ranges = <0 0x40020000 0x3000>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&syscfg 0x8>;
+			pins-are-numbered;
+
+			gpioa: gpio@40020000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&rcc 0 256>;
+				st,bank-name = "GPIOA";
+			};
+
+			gpiob: gpio@40020400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x400 0x400>;
+				clocks = <&rcc 0 257>;
+				st,bank-name = "GPIOB";
+			};
+
+			gpioc: gpio@40020800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x800 0x400>;
+				clocks = <&rcc 0 258>;
+				st,bank-name = "GPIOC";
+			};
+
+			gpiod: gpio@40020c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0xc00 0x400>;
+				clocks = <&rcc 0 259>;
+				st,bank-name = "GPIOD";
+			};
+
+			gpioe: gpio@40021000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x1000 0x400>;
+				clocks = <&rcc 0 260>;
+				st,bank-name = "GPIOE";
+			};
+
+			gpiof: gpio@40021400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x1400 0x400>;
+				clocks = <&rcc 0 261>;
+				st,bank-name = "GPIOF";
+			};
+
+			gpiog: gpio@40021800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x1800 0x400>;
+				clocks = <&rcc 0 262>;
+				st,bank-name = "GPIOG";
+			};
+
+			gpioh: gpio@40021c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x1c00 0x400>;
+				clocks = <&rcc 0 263>;
+				st,bank-name = "GPIOH";
+			};
+
+			gpioi: gpio@40022000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x2000 0x400>;
+				clocks = <&rcc 0 264>;
+				st,bank-name = "GPIOI";
+			};
+
+			gpioj: gpio@40022400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x2400 0x400>;
+				clocks = <&rcc 0 265>;
+				st,bank-name = "GPIOJ";
+			};
+
+			gpiok: gpio@40022800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x2800 0x400>;
+				clocks = <&rcc 0 266>;
+				st,bank-name = "GPIOK";
+			};
+
+			usart1_pins_a: usart1@0 {
+				pins1 {
+					pinmux = <STM32F746_PA9_FUNC_USART1_TX>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32F746_PA10_FUNC_USART1_RX>;
+					bias-disable;
+				};
+			};
+		};
+
+		rcc: rcc@40023800 {
+			#clock-cells = <2>;
+			compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
+			reg = <0x40023800 0x400>;
+			clocks = <&clk_hse>;
+		};
+	};
+};
+
+&systick {
+	clocks = <&rcc 1 0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 7e7dfc2..b14a428 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -967,7 +967,8 @@
 			compatible = "allwinner,sun4i-a10-pinctrl";
 			reg = <0x01c20800 0x400>;
 			interrupts = <28>;
-			clocks = <&apb0_gates 5>;
+			clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
index aef9147..0684d79 100644
--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
@@ -250,8 +250,8 @@
 
 &spi2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spi2_pins_a>,
-		    <&spi2_cs0_pins_a>;
+	pinctrl-0 = <&spi2_pins_b>,
+		    <&spi2_cs0_pins_b>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index c41a2ba..7aa8c7a 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -243,14 +243,14 @@
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
-	spi2_pins_a: spi2@0 {
+	spi2_pins_b: spi2@1 {
 		allwinner,pins = "PB12", "PB13", "PB14";
 		allwinner,function = "spi2";
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
-	spi2_cs0_pins_a: spi2_cs0@0 {
+	spi2_cs0_pins_b: spi2_cs0@1 {
 		allwinner,pins = "PB11";
 		allwinner,function = "spi2";
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index b3c234c..bb7210e 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -72,6 +72,47 @@
 			default-state = "on";
 		};
 	};
+
+	bridge {
+		compatible = "dumb-vga-dac";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&tcon0_out_vga>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+};
+
+&be0 {
+	status = "okay";
 };
 
 &ehci0 {
@@ -211,6 +252,19 @@
 	status = "okay";
 };
 
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_vga: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&vga_bridge_in>;
+	};
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart1_pins_b>;
diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
index a8b0bcc..3d7ff10 100644
--- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
+++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
@@ -83,22 +83,6 @@
 	allwinner,pins = "PG3";
 };
 
-&i2c1 {
-	icn8318: touchscreen@40 {
-		compatible = "chipone,icn8318";
-		reg = <0x40>;
-		interrupt-parent = <&pio>;
-		interrupts = <6 9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
-		pinctrl-names = "default";
-		pinctrl-0 = <&ts_wake_pin_p66>;
-		wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
-		touchscreen-size-x = <800>;
-		touchscreen-size-y = <480>;
-		touchscreen-inverted-x;
-		touchscreen-swapped-x-y;
-	};
-};
-
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins_a>;
@@ -121,20 +105,26 @@
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
-
-	ts_wake_pin_p66: ts_wake_pin@0 {
-		allwinner,pins = "PB3";
-		allwinner,function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-	};
-
 };
 
 &reg_usb0_vbus {
 	gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
 };
 
+&touchscreen {
+	compatible = "chipone,icn8318";
+	reg = <0x40>;
+	/* The P66 uses a different EINT then the reference design */
+	interrupts = <6 9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
+	/* The icn8318 binding expects wake-gpios instead of power-gpios */
+	wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	touchscreen-size-x = <800>;
+	touchscreen-size-y = <480>;
+	touchscreen-inverted-x;
+	touchscreen-swapped-x-y;
+	status = "okay";
+};
+
 &uart1 {
 	/* The P66 uses the uart pins as gpios */
 	status = "disabled";
diff --git a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts
new file mode 100644
index 0000000..92a2dc6
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts
@@ -0,0 +1,266 @@
+/*
+ * Copyright 2016 Free Electrons
+ * Copyright 2016 NextThing Co
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-gr8.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NextThing C.H.I.P. Pro";
+	compatible = "nextthing,chip-pro", "nextthing,gr8";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status {
+			label = "chip-pro:white:status";
+			gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	mmc0_pwrseq: mmc0_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on_pin_chip_pro>;
+		reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+
+		/*
+		* The interrupt is routed through the "External Fast
+		* Interrupt Request" pin (ball G13 of the module)
+		* directly to the main interrupt controller, without
+		* any other controller interfering.
+		*/
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "disabled";
+};
+
+&i2s0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_mclk_pins_a>, <&i2s0_data_pins_a>;
+	status = "disabled";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc0_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>;
+	status = "okay";
+
+	nand@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0>;
+		allwinner,rb = <0>;
+		nand-ecc-mode = "hw";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_pin_chip_pro: usb0-id-pin@0 {
+		allwinner,pins = "PG2";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	wifi_reg_on_pin_chip_pro: wifi-reg-on-pin@0 {
+		allwinner,pins = "PB10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins>;
+	status = "disabled";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+	regulator-always-on;
+};
+
+&reg_dcdc3 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-sys";
+	regulator-always-on;
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+	regulator-always-on;
+};
+
+/*
+ * Both LDO3 and LDO4 are used in parallel to power up the
+ * WiFi/BT chip.
+ */
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-1";
+	regulator-always-on;
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-2";
+	regulator-always-on;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_a>, <&uart1_cts_rts_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_a>, <&uart2_cts_rts_pins_a>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins_a>, <&uart3_cts_rts_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	/*
+	 * The CHIP Pro doesn't have a controllable VBUS, nor does it
+	 * have any 5v rail on the board itself.
+	 *
+	 * If one wants to use it as a true OTG port, it should be
+	 * done in the baseboard, and its DT / overlay will add it.
+	 */
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_pin_chip_pro>;
+	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-gr8-evb.dts b/arch/arm/boot/dts/sun5i-gr8-evb.dts
index 714381f..030605a 100644
--- a/arch/arm/boot/dts/sun5i-gr8-evb.dts
+++ b/arch/arm/boot/dts/sun5i-gr8-evb.dts
@@ -75,6 +75,39 @@
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
 	};
+
+	sound-analog {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "gr8-evb-wm8978";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <512>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8978>;
+		};
+	};
+
+	sound-spdif {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
 };
 
 &be0 {
diff --git a/arch/arm/boot/dts/sun5i-gr8.dtsi b/arch/arm/boot/dts/sun5i-gr8.dtsi
index ca54e03..ea86d4d 100644
--- a/arch/arm/boot/dts/sun5i-gr8.dtsi
+++ b/arch/arm/boot/dts/sun5i-gr8.dtsi
@@ -792,7 +792,7 @@
 			};
 
 			i2s0_mclk_pins_a: i2s0-mclk@0 {
-				allwinner,pins = "PB6", "PB7", "PB8", "PB9";
+				allwinner,pins = "PB5";
 				allwinner,function = "i2s0";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
@@ -854,6 +854,13 @@
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
+			pwm1_pins: pwm1 {
+				allwinner,pins = "PG13";
+				allwinner,function = "pwm1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
 			spdif_tx_pins_a: spdif@0 {
 				allwinner,pins = "PB10";
 				allwinner,function = "spdif";
@@ -874,6 +881,34 @@
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
+
+			uart2_pins_a: uart2@1 {
+				allwinner,pins = "PD2", "PD3";
+				allwinner,function = "uart2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart2_cts_rts_pins_a: uart2-cts-rts@0 {
+				allwinner,pins = "PD4", "PD5";
+				allwinner,function = "uart2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart3_pins_a: uart3@1 {
+				allwinner,pins = "PG9", "PG10";
+				allwinner,function = "uart3";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart3_cts_rts_pins_a: uart3-cts-rts@0 {
+				allwinner,pins = "PG11", "PG12";
+				allwinner,function = "uart3";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
 		};
 
 		pwm: pwm@01c20e00 {
@@ -978,6 +1013,16 @@
 			status = "disabled";
 		};
 
+		uart3: serial@01c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 19>;
+			status = "disabled";
+		};
+
 		i2c0: i2c@01c2ac00 {
 			compatible = "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2ac00 0x400>;
diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts
index b68a123..c6da5ad 100644
--- a/arch/arm/boot/dts/sun5i-r8-chip.dts
+++ b/arch/arm/boot/dts/sun5i-r8-chip.dts
@@ -56,9 +56,11 @@
 
 	aliases {
 		i2c0 = &i2c0;
+		i2c1 = &i2c1;
 		i2c2 = &i2c2;
 		serial0 = &uart1;
 		serial1 = &uart3;
+		spi0 = &spi2;
 	};
 
 	chosen {
@@ -74,6 +76,20 @@
 			default-state = "on";
 		};
 	};
+
+	mmc0_pwrseq: mmc0_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&chip_wifi_reg_on_pin>;
+		reset-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&chip_w1_pin>;
+	};
 };
 
 &be0 {
@@ -112,6 +128,12 @@
 
 #include "axp209.dtsi"
 
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "disabled";
+};
+
 &i2c2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
@@ -131,10 +153,15 @@
 	};
 };
 
+&mmc0_pins_a {
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc0_pwrseq>;
 	bus-width = <4>;
 	non-removable;
 	status = "okay";
@@ -156,12 +183,26 @@
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
+	chip_wifi_reg_on_pin: chip_wifi_reg_on_pin@0 {
+	        allwinner,pins = "PC19";
+	        allwinner,function = "gpio_out";
+	        allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+	        allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
 	chip_id_det_pin: chip_id_det_pin@0 {
 		allwinner,pins = "PG2";
 		allwinner,function = "gpio_in";
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	chip_w1_pin: chip_w1_pin@0 {
+		allwinner,pins = "PD2";
+		allwinner,function = "gpio_in";
+	        allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+	        allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
 };
 
 &reg_dcdc2 {
@@ -189,6 +230,28 @@
 	regulator-always-on;
 };
 
+/*
+ * Both LDO3 and LDO4 are used in parallel to power up the WiFi/BT
+ * Chip.
+ *
+ * If those are not enabled, the SDIO part will not enumerate, and
+ * since there's no way currently to pass DT infos to an SDIO device,
+ * we cannot really do better than this ugly hack for now.
+ */
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-1";
+	regulator-always-on;
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-2";
+	regulator-always-on;
+};
+
 &reg_ldo5 {
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
@@ -202,6 +265,12 @@
 	status = "okay";
 };
 
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "disabled";
+};
+
 &tcon0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
index 20cc940..82f87cd 100644
--- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
@@ -41,6 +41,7 @@
  */
 #include "sunxi-reference-design-tablet.dtsi"
 
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pwm/pwm.h>
 
 / {
@@ -84,6 +85,23 @@
 };
 
 &i2c1 {
+	/*
+	 * The gsl1680 is rated at 400KHz and it will not work reliable at
+	 * 100KHz, this has been confirmed on multiple different q8 tablets.
+	 * All other devices on this bus are also rated for 400KHz.
+	 */
+	clock-frequency = <400000>;
+
+	touchscreen: touchscreen {
+		interrupt-parent = <&pio>;
+		interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; /* EINT11 (PG11) */
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_power_pin>;
+		power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+		/* Tablet dts must provide reg and compatible */
+		status = "disabled";
+	};
+
 	pcf8563: rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
@@ -125,6 +143,13 @@
 		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
 
+	ts_power_pin: ts_power_pin {
+		pins = "PB3";
+		function = "gpio_out";
+		drive-strength = <10>;
+		bias-disable;
+	};
+
 	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
 		allwinner,pins = "PG1";
 		allwinner,function = "gpio_in";
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index e374f4f..b0fca4e 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -547,7 +547,8 @@
 		pio: pinctrl@01c20800 {
 			reg = <0x01c20800 0x400>;
 			interrupts = <28>;
-			clocks = <&apb0_gates 5>;
+			clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
@@ -574,6 +575,16 @@
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
+			lcd_rgb565_pins: lcd_rgb565@0 {
+				allwinner,pins = "PD3", "PD4", "PD5", "PD6", "PD7",
+						 "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+						 "PD19", "PD20", "PD21", "PD22", "PD23",
+						 "PD24", "PD25", "PD26", "PD27";
+				allwinner,function = "lcd0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
 			mmc0_pins_a: mmc0@0 {
 				allwinner,pins = "PF0", "PF1", "PF2", "PF3",
 						 "PF4", "PF5";
@@ -591,6 +602,20 @@
 				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
 
+			spi2_pins_a: spi2@0 {
+				allwinner,pins = "PE1", "PE2", "PE3";
+				allwinner,function = "spi2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi2_cs0_pins_a: spi2-cs0@0 {
+				allwinner,pins = "PE0";
+				allwinner,function = "spi2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
 			uart3_pins_a: uart3@0 {
 				allwinner,pins = "PG9", "PG10";
 				allwinner,function = "uart3";
diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
index 9a74637..735914f 100644
--- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
+++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
@@ -63,12 +63,79 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	vga-connector {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_dac_out>;
+			};
+		};
+	};
+
+	vga-dac {
+		compatible = "dumb-vga-dac";
+		vdd-supply = <&reg_vga_3v3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				vga_dac_in: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&tcon0_out_vga>;
+				};
+			};
+
+			port@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+
+				vga_dac_out: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	reg_vga_3v3: vga_3v3_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vga-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
+	};
+
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
 	};
 };
 
+&codec {
+	allwinner,audio-routing =
+		"Headphone", "HP",
+		"Speaker", "LINEOUT",
+		"LINEIN", "Line In",
+		"MIC1", "Mic",
+		"MIC2", "Headset Mic",
+		"Mic",	"MBIAS",
+		"Headset Mic", "HBIAS";
+	allwinner,pa-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_dcdc3>;
 };
@@ -245,6 +312,19 @@
 	status = "okay";
 };
 
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd0_rgb888_pins>;
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_vga: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&vga_dac_in>;
+	};
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index ce196045..2b26175 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -231,6 +231,11 @@
 		};
 	};
 
+	de: display-engine {
+		compatible = "allwinner,sun6i-a31-display-engine";
+		allwinner,pipelines = <&fe0>;
+	};
+
 	soc@01c00000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -246,6 +251,44 @@
 			#dma-cells = <1>;
 		};
 
+		tcon0: lcd-controller@01c0c000 {
+			compatible = "allwinner,sun6i-a31-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_AHB1_LCD0>;
+			reset-names = "lcd";
+			clocks = <&ccu CLK_AHB1_LCD0>,
+				 <&ccu CLK_LCD0_CH0>,
+				 <&ccu CLK_LCD0_CH1>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon0-pixel-clock";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_drc0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&drc0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			};
+		};
+
 		mmc0: mmc@01c0f000 {
 			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c0f000 0x1000>;
@@ -428,19 +471,55 @@
 				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_APB1_PIO>;
+			clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
-			uart0_pins_a: uart0@0 {
-				allwinner,pins = "PH20", "PH21";
-				allwinner,function = "uart0";
+			gmac_pins_gmii_a: gmac_gmii@0 {
+				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+						"PA4", "PA5", "PA6", "PA7",
+						"PA8", "PA9", "PA10", "PA11",
+						"PA12", "PA13", "PA14",	"PA15",
+						"PA16", "PA17", "PA18", "PA19",
+						"PA20", "PA21", "PA22", "PA23",
+						"PA24", "PA25", "PA26", "PA27";
+				allwinner,function = "gmac";
+				/*
+				 * data lines in GMII mode run at 125MHz and
+				 * might need a higher signal drive strength
+				 */
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			gmac_pins_mii_a: gmac_mii@0 {
+				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+						"PA8", "PA9", "PA11",
+						"PA12", "PA13", "PA14", "PA19",
+						"PA20", "PA21", "PA22", "PA23",
+						"PA24", "PA26", "PA27";
+				allwinner,function = "gmac";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
+			gmac_pins_rgmii_a: gmac_rgmii@0 {
+				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+						"PA9", "PA10", "PA11",
+						"PA12", "PA13", "PA14", "PA19",
+						"PA20", "PA25", "PA26", "PA27";
+				allwinner,function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
 			i2c0_pins_a: i2c0@0 {
 				allwinner,pins = "PH14", "PH15";
 				allwinner,function = "i2c0";
@@ -462,6 +541,19 @@
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
+			lcd0_rgb888_pins: lcd0_rgb888 {
+				allwinner,pins = "PD0", "PD1", "PD2", "PD3",
+						 "PD4", "PD5", "PD6", "PD7",
+						 "PD8", "PD9", "PD10", "PD11",
+						 "PD12", "PD13", "PD14", "PD15",
+						 "PD16", "PD17", "PD18", "PD19",
+						 "PD20", "PD21", "PD22", "PD23",
+						 "PD24", "PD25", "PD26", "PD27";
+				allwinner,function = "lcd0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
 			mmc0_pins_a: mmc0@0 {
 				allwinner,pins = "PF0", "PF1", "PF2",
 						 "PF3", "PF4", "PF5";
@@ -506,47 +598,12 @@
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			gmac_pins_mii_a: gmac_mii@0 {
-				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
-						"PA8", "PA9", "PA11",
-						"PA12", "PA13", "PA14", "PA19",
-						"PA20", "PA21", "PA22", "PA23",
-						"PA24", "PA26", "PA27";
-				allwinner,function = "gmac";
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PH20", "PH21";
+				allwinner,function = "uart0";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
-
-			gmac_pins_gmii_a: gmac_gmii@0 {
-				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
-						"PA4", "PA5", "PA6", "PA7",
-						"PA8", "PA9", "PA10", "PA11",
-						"PA12", "PA13", "PA14",	"PA15",
-						"PA16", "PA17", "PA18", "PA19",
-						"PA20", "PA21", "PA22", "PA23",
-						"PA24", "PA25", "PA26", "PA27";
-				allwinner,function = "gmac";
-				/*
-				 * data lines in GMII mode run at 125MHz and
-				 * might need a higher signal drive strength
-				 */
-				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			gmac_pins_rgmii_a: gmac_rgmii@0 {
-				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
-						"PA9", "PA10", "PA11",
-						"PA12", "PA13", "PA14", "PA19",
-						"PA20", "PA25", "PA26", "PA27";
-				allwinner,function = "gmac";
-				/*
-				 * data lines in RGMII mode use DDR mode
-				 * and need a higher signal drive strength
-				 */
-				allwinner,drive = <SUN4I_PINCTRL_40_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
 		};
 
 		timer@01c20c00 {
@@ -728,6 +785,19 @@
 			reset-names = "ahb";
 		};
 
+		codec: codec@01c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun6i-a31-codec";
+			reg = <0x01c22c00 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_CODEC>, <&ccu CLK_CODEC>;
+			clock-names = "apb", "codec";
+			resets = <&ccu RST_APB1_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		timer@01c60000 {
 			compatible = "allwinner,sun6i-a31-hstimer",
 				     "allwinner,sun7i-a20-hstimer";
@@ -799,6 +869,115 @@
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
+		fe0: display-frontend@01e00000 {
+			compatible = "allwinner,sun6i-a31-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_FE0>, <&ccu CLK_FE0>,
+				 <&ccu CLK_DRAM_FE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_AHB1_FE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe0>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@01e60000 {
+			compatible = "allwinner,sun6i-a31-display-backend";
+			reg = <0x01e60000 0x10000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_BE0>,
+				 <&ccu CLK_DRAM_BE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_AHB1_BE0>;
+
+			assigned-clocks = <&ccu CLK_BE0>;
+			assigned-clock-rates = <300000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be0_out_drc0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&drc0_in_be0>;
+					};
+				};
+			};
+		};
+
+		drc0: drc@01e70000 {
+			compatible = "allwinner,sun6i-a31-drc";
+			reg = <0x01e70000 0x10000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_DRC0>, <&ccu CLK_IEP_DRC0>,
+				 <&ccu CLK_DRAM_DRC0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_AHB1_DRC0>;
+
+			assigned-clocks = <&ccu CLK_IEP_DRC0>;
+			assigned-clock-rates = <300000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					drc0_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_drc0>;
+					};
+				};
+
+				drc0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					drc0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_drc0>;
+					};
+				};
+			};
+		};
+
 		rtc: rtc@01f00000 {
 			compatible = "allwinner,sun6i-a31-rtc";
 			reg = <0x01f00000 0x54>;
@@ -886,7 +1065,8 @@
 			reg = <0x01f02c00 0x400>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 0>;
+			clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			resets = <&apb0_rst 0>;
 			gpio-controller;
 			interrupt-controller;
diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
index 6ead2f5..c35ec11 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
@@ -65,6 +65,14 @@
 	};
 };
 
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",	"MBIAS";
+	status = "okay";
+};
+
 &ehci0 {
 	/* USB 2.0 4 port hub IC */
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun6i-a31s.dtsi b/arch/arm/boot/dts/sun6i-a31s.dtsi
index c17a327..97e2c51 100644
--- a/arch/arm/boot/dts/sun6i-a31s.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31s.dtsi
@@ -48,6 +48,14 @@
 
 #include "sun6i-a31.dtsi"
 
+&de {
+	compatible = "allwinner,sun6i-a31s-display-engine";
+};
+
 &pio {
 	compatible = "allwinner,sun6i-a31s-pinctrl";
 };
+
+&tcon0 {
+	compatible = "allwinner,sun6i-a31s-tcon";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
index ba5bca0..532f1a1 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
@@ -105,6 +105,10 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -132,16 +136,14 @@
 	status = "okay";
 
 	axp209: pmic@34 {
-		compatible = "x-powers,axp209";
 		reg = <0x34>;
 		interrupt-parent = <&nmi_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
 	};
 };
 
+#include "axp209.dtsi"
+
 &ir0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir0_rx_pins_a>;
@@ -167,7 +169,7 @@
 	mmc-pwrseq = <&mmc3_pwrseq>;
 	bus-width = <4>;
 	non-removable;
-	enable-sdio-wakeup;
+	wakeup-source;
 	status = "okay";
 
 	brcmf: bcrmf@1 {
@@ -192,6 +194,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	gmac_power_pin_bpi_m1p: gmac_power_pin@0 {
 		allwinner,pins = "PH23";
@@ -222,8 +228,54 @@
 	};
 };
 
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
 	status = "okay";
 };
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	/* VBUS on usb host ports are tied to DC5V and therefore always on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
index 23aacce..134e0c1 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
@@ -88,6 +88,10 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &codec {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 94cf5a1..f7db067 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -1085,7 +1085,8 @@
 			compatible = "allwinner,sun7i-a20-pinctrl";
 			reg = <0x01c20800 0x400>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 5>;
+			clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index 300a1bd..e4991a7 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -266,7 +266,8 @@
 			/* compatible gets set in SoC specific dtsi file */
 			reg = <0x01c20800 0x400>;
 			/* interrupts get set in SoC specific dtsi file */
-			clocks = <&ccu CLK_BUS_PIO>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
@@ -575,7 +576,8 @@
 			compatible = "allwinner,sun8i-a23-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 0>;
+			clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			resets = <&apb0_rst 0>;
 			gpio-controller;
 			interrupt-controller;
diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts
index a86cbed..21bb291 100644
--- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts
+++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts
@@ -98,13 +98,6 @@
 	};
 };
 
-&reg_ldo_io1 {
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "vcc-touchscreen";
-	status = "okay";
-};
-
 &touchscreen {
 	reg = <0x40>;
 	compatible = "silead,gsl1680";
diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
index fef6abc..71bb941 100644
--- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
+++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
@@ -213,6 +213,11 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
 &usbphy {
 	status = "okay";
 	usb1_vbus-supply = <&reg_vcc5v0>; /* USB1 VBUS is always on */
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
new file mode 100644
index 0000000..ec63d10
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-h3-nanopi.dtsi"
+
+/ {
+	model = "FriendlyArm NanoPi M1";
+	compatible = "friendlyarm,nanopi-m1", "allwinner,sun8i-h3";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
index 3d64caf..8d2cc6e 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
@@ -40,86 +40,9 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-/dts-v1/;
-#include "sun8i-h3.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include "sun8i-h3-nanopi.dtsi"
 
 / {
 	model = "FriendlyARM NanoPi NEO";
 	compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
-
-		pwr {
-			label = "nanopi:green:pwr";
-			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
-			default-state = "on";
-		};
-
-		status {
-			label = "nanopi:blue:status";
-			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
-		};
-	};
-};
-
-&ehci3 {
-	status = "okay";
-};
-
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
-	vmmc-supply = <&reg_vcc3v3>;
-	bus-width = <4>;
-	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
-	cd-inverted;
-	status = "okay";
-};
-
-&ohci3 {
-	status = "okay";
-};
-
-&pio {
-	leds_opc: led-pins {
-		allwinner,pins = "PA10";
-		allwinner,function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-	};
-};
-
-&r_pio {
-	leds_r_opc: led-pins {
-		allwinner,pins = "PL10";
-		allwinner,function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
-	status = "okay";
-};
-
-&usbphy {
-	/* USB VBUS is always on */
-	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
new file mode 100644
index 0000000..8038aa2
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2016 James Pettigrew <james@innovum.com.au>
+ * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_npi>, <&leds_r_npi>;
+
+		status {
+			label = "nanopi:blue:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		pwr {
+			label = "nanopi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	r_gpio_keys {
+		compatible = "gpio-keys";
+		input-name = "k1";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sw_r_npi>;
+
+		k1@0 {
+			label = "k1";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	status = "okay";
+	vmmc-supply = <&reg_vcc3v3>;
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&pio {
+	leds_npi: led_pins@0 {
+		allwinner,pins = "PA10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&r_pio {
+	leds_r_npi: led_pins@0 {
+		allwinner,pins = "PL10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	sw_r_npi: key_pins@0 {
+		allwinner,pins = "PL3";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index f4ba088..6c14a6f 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -321,7 +321,8 @@
 			reg = <0x01c20800 0x400>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_PIO>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
 			interrupt-controller;
@@ -381,6 +382,20 @@
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
+			spi0_pins: spi0 {
+				allwinner,pins = "PC0", "PC1", "PC2", "PC3";
+				allwinner,function = "spi0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi1_pins: spi1 {
+				allwinner,pins = "PA15", "PA16", "PA14", "PA13";
+				allwinner,function = "spi1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
 			uart0_pins_a: uart0@0 {
 				allwinner,pins = "PA4", "PA5";
 				allwinner,function = "uart0";
@@ -425,6 +440,38 @@
 			clocks = <&osc24M>;
 		};
 
+		spi0: spi@01c68000 {
+			compatible = "allwinner,sun8i-h3-spi";
+			reg = <0x01c68000 0x1000>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_pins>;
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@01c69000 {
+			compatible = "allwinner,sun8i-h3-spi";
+			reg = <0x01c69000 0x1000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 24>, <&dma 24>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_pins>;
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		wdt0: watchdog@01c20ca0 {
 			compatible = "allwinner,sun6i-a31-wdt";
 			reg = <0x01c20ca0 0x20>;
@@ -568,7 +615,8 @@
 			compatible = "allwinner,sun8i-h3-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 0>;
+			clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			resets = <&apb0_reset 0>;
 			gpio-controller;
 			#gpio-cells = <3>;
diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
index 08cd001..69bc0cd 100644
--- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
@@ -209,6 +209,13 @@
 	status = "okay";
 };
 
+&reg_ldo_io1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-touchscreen";
+	status = "okay";
+};
+
 &reg_rtc_ldo {
 	regulator-name = "vcc-rtc";
 };
diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
index 439847a..67b02fe 100644
--- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
+++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
@@ -76,6 +76,14 @@
 			gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
 		};
 	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "ext_clock";
+		/* enables internal regulator and de-asserts reset */
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
+	};
 };
 
 &mmc0 {
@@ -88,6 +96,21 @@
 	status = "okay";
 };
 
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>, <&wifi_en_pin_cubieboard4>;
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_cldo3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc1_pins {
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_8bit_pins>;
@@ -128,6 +151,15 @@
 	status = "okay";
 };
 
+&r_pio {
+	wifi_en_pin_cubieboard4: wifi_en_pin@0 {
+		allwinner,pins = "PL2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
 &r_rsb {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index ceb6ef1..7e036b2 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -105,6 +105,14 @@
 		enable-active-high;
 		gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
 	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "ext_clock";
+		/* enables internal regulator and de-asserts reset */
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
+	};
 };
 
 &ehci0 {
@@ -130,6 +138,21 @@
 	status = "okay";
 };
 
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>, <&wifi_en_pin_optimus>;
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_cldo3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc1_pins {
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_8bit_pins>;
@@ -199,6 +222,13 @@
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	wifi_en_pin_optimus: wifi_en_pin@0 {
+		allwinner,pins = "PL2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
 };
 
 &r_rsb {
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 3c5214c..979ad1a 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -678,7 +678,8 @@
 				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 5>;
+			clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
@@ -700,6 +701,14 @@
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
+			mmc1_pins: mmc1 {
+				allwinner,pins = "PG0", "PG1" ,"PG2", "PG3",
+						 "PG4", "PG5";
+				allwinner,function = "mmc1";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
 			mmc2_8bit_pins: mmc2_8bit {
 				allwinner,pins = "PC6", "PC7", "PC8", "PC9",
 						 "PC10", "PC11", "PC12",
@@ -894,7 +903,8 @@
 			reg = <0x08002c00 0x400>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apbs_gates 0>;
+			clocks = <&apbs_gates 0>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			resets = <&apbs_rst 0>;
 			gpio-controller;
 			interrupt-controller;
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index e7a73db..0819721 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -1595,7 +1595,7 @@
 		clock-frequency = <400000>;
 
 		/* SGTL5000 audio codec */
-		sgtl5000: codec@0a {
+		sgtl5000: codec@a {
 			compatible = "fsl,sgtl5000";
 			reg = <0x0a>;
 			VDDA-supply = <&reg_3v3>;
diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi
index 271505e..eabfa65 100644
--- a/arch/arm/boot/dts/tegra124-nyan.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
@@ -42,6 +42,12 @@
 		};
 	};
 
+	gpu@0,57000000 {
+		status = "okay";
+
+		vdd-supply = <&vdd_gpu>;
+	};
+
 	serial@70006000 {
 		/* Debug connector on the bottom of the board near SD card. */
 		status = "okay";
@@ -214,7 +220,7 @@
 					regulator-always-on;
 				};
 
-				sd6 {
+				vdd_gpu: sd6 {
 					regulator-name = "+VDD_GPU_AP";
 					regulator-min-microvolt = <650000>;
 					regulator-max-microvolt = <1200000>;
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 2207c08..e880750 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -376,6 +376,19 @@
 		status = "disabled";
 	};
 
+	gmi@70009000 {
+		compatible = "nvidia,tegra20-gmi";
+		reg = <0x70009000 0x1000>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xd0000000 0xfffffff>;
+		clocks = <&tegra_car TEGRA20_CLK_NOR>;
+		clock-names = "gmi";
+		resets = <&tegra_car 42>;
+		reset-names = "gmi";
+		status = "disabled";
+	};
+
 	pwm: pwm@7000a000 {
 		compatible = "nvidia,tegra20-pwm";
 		reg = <0x7000a000 0x100>;
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index 192b951..f6c7c3e 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -48,6 +48,24 @@
 		pinctrl-0 = <&state_default>;
 
 		state_default: pinmux {
+			/* Analogue Audio (On-module) */
+			clk1_out_pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_fs_pp0 {
+				nvidia,pins =	"dap3_fs_pp0",
+						"dap3_sclk_pp3",
+						"dap3_din_pp1",
+						"dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
 			/* Apalis BKL1_ON */
 			pv2 {
 				nvidia,pins = "pv2";
@@ -429,6 +447,15 @@
 		status = "okay";
 		clock-frequency = <100000>;
 
+		/* SGTL5000 audio codec */
+		sgtl5000: codec@a {
+			compatible = "fsl,sgtl5000";
+			reg = <0x0a>;
+			VDDA-supply = <&sys_3v3_reg>;
+			VDDIO-supply = <&sys_3v3_reg>;
+			clocks = <&tegra_car TEGRA30_CLK_EXTERN1>;
+		};
+
 		pmic: tps65911@2d {
 			compatible = "ti,tps65911";
 			reg = <0x2d>;
@@ -660,6 +687,12 @@
 		nvidia,sys-clock-req-active-high;
 	};
 
+	ahub@70080000 {
+		i2s@70080500 {
+			status = "okay";
+		};
+	};
+
 	/* eMMC */
 	sdhci@78000600 {
 		status = "okay";
@@ -733,4 +766,20 @@
 			regulator-always-on;
 		};
 	};
+
+	sound {
+		compatible = "toradex,tegra-audio-sgtl5000-apalis_t30",
+			     "nvidia,tegra-audio-sgtl5000";
+		nvidia,model = "Toradex Apalis T30";
+		nvidia,audio-routing =
+			"Headphone Jack", "HP_OUT",
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack";
+		nvidia,i2s-controller = <&tegra_i2s2>;
+		nvidia,audio-codec = <&sgtl5000>;
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA30_CLK_EXTERN1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
 };
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index a265534..5360d63 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -29,6 +29,24 @@
 		pinctrl-0 = <&state_default>;
 
 		state_default: pinmux {
+			/* Analogue Audio (On-module) */
+			clk1_out_pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_fs_pp0 {
+				nvidia,pins =	"dap3_fs_pp0",
+						"dap3_sclk_pp3",
+						"dap3_din_pp1",
+						"dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
 			/* Colibri BL_ON */
 			pv2 {
 				nvidia,pins = "pv2";
@@ -207,6 +225,15 @@
 		status = "okay";
 		clock-frequency = <100000>;
 
+		/* SGTL5000 audio codec */
+		sgtl5000: codec@a {
+			compatible = "fsl,sgtl5000";
+			reg = <0x0a>;
+			VDDA-supply = <&sys_3v3_reg>;
+			VDDIO-supply = <&sys_3v3_reg>;
+			clocks = <&tegra_car TEGRA30_CLK_EXTERN1>;
+		};
+
 		pmic: tps65911@2d {
 			compatible = "ti,tps65911";
 			reg = <0x2d>;
@@ -396,6 +423,12 @@
 		nvidia,sys-clock-req-active-high;
 	};
 
+	ahub@70080000 {
+		i2s@70080500 {
+			status = "okay";
+		};
+	};
+
 	/* eMMC */
 	sdhci@78000600 {
 		status = "okay";
@@ -471,4 +504,20 @@
 			regulator-always-on;
 		};
 	};
+
+	sound {
+		compatible = "toradex,tegra-audio-sgtl5000-colibri_t30",
+			     "nvidia,tegra-audio-sgtl5000";
+		nvidia,model = "Toradex Colibri T30";
+		nvidia,audio-routing =
+			"Headphone Jack", "HP_OUT",
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack";
+		nvidia,i2s-controller = <&tegra_i2s2>;
+		nvidia,audio-codec = <&sgtl5000>;
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA30_CLK_EXTERN1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
 };
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 5030065..bbb1c00 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -439,6 +439,19 @@
 		status = "disabled";
 	};
 
+	gmi@70009000 {
+		compatible = "nvidia,tegra30-gmi";
+		reg = <0x70009000 0x1000>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0x48000000 0x7ffffff>;
+		clocks = <&tegra_car TEGRA30_CLK_NOR>;
+		clock-names = "gmi";
+		resets = <&tegra_car 42>;
+		reset-names = "gmi";
+		status = "disabled";
+	};
+
 	pwm: pwm@7000a000 {
 		compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm";
 		reg = <0x7000a000 0x100>;
diff --git a/arch/arm/boot/dts/tps65217.dtsi b/arch/arm/boot/dts/tps65217.dtsi
index a632724..02de56b 100644
--- a/arch/arm/boot/dts/tps65217.dtsi
+++ b/arch/arm/boot/dts/tps65217.dtsi
@@ -13,6 +13,18 @@
 
 &tps {
 	compatible = "ti,tps65217";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	charger {
+		compatible = "ti,tps65217-charger";
+		status = "disabled";
+	};
+
+	pwrbutton {
+		compatible = "ti,tps65217-pwrbutton";
+		status = "disabled";
+	};
 
 	regulators {
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/uniphier-common32.dtsi b/arch/arm/boot/dts/uniphier-common32.dtsi
deleted file mode 100644
index 8c8a851..0000000
--- a/arch/arm/boot/dts/uniphier-common32.dtsi
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * Device Tree Source commonly used by UniPhier ARM SoCs
- *
- * Copyright (C) 2015-2016 Socionext Inc.
- *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	psci {
-		compatible = "arm,psci-0.2";
-		method = "smc";
-	};
-
-	clocks {
-		refclk: ref {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-		};
-	};
-
-	soc: soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		interrupt-parent = <&intc>;
-
-		serial0: serial@54006800 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006800 0x40>;
-			interrupts = <0 33 4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart0>;
-			clocks = <&peri_clk 0>;
-		};
-
-		serial1: serial@54006900 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006900 0x40>;
-			interrupts = <0 35 4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart1>;
-			clocks = <&peri_clk 1>;
-		};
-
-		serial2: serial@54006a00 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006a00 0x40>;
-			interrupts = <0 37 4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart2>;
-			clocks = <&peri_clk 2>;
-		};
-
-		serial3: serial@54006b00 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006b00 0x40>;
-			interrupts = <0 177 4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart3>;
-			clocks = <&peri_clk 3>;
-		};
-
-		system_bus: system-bus@58c00000 {
-			compatible = "socionext,uniphier-system-bus";
-			status = "disabled";
-			reg = <0x58c00000 0x400>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_system_bus>;
-		};
-
-		smpctrl@59800000 {
-			compatible = "socionext,uniphier-smpctrl";
-			reg = <0x59801000 0x400>;
-		};
-
-		mioctrl@59810000 {
-			compatible = "socionext,uniphier-mioctrl",
-				     "simple-mfd", "syscon";
-			reg = <0x59810000 0x800>;
-
-			mio_clk: clock {
-				#clock-cells = <1>;
-			};
-
-			mio_rst: reset {
-				#reset-cells = <1>;
-			};
-		};
-
-		perictrl@59820000 {
-			compatible = "socionext,uniphier-perictrl",
-				     "simple-mfd", "syscon";
-			reg = <0x59820000 0x200>;
-
-			peri_clk: clock {
-				#clock-cells = <1>;
-			};
-
-			peri_rst: reset {
-				#reset-cells = <1>;
-			};
-		};
-
-		timer@60000200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x60000200 0x20>;
-			interrupts = <1 11 0x104>;
-			clocks = <&arm_timer_clk>;
-		};
-
-		timer@60000600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x60000600 0x20>;
-			interrupts = <1 13 0x104>;
-			clocks = <&arm_timer_clk>;
-		};
-
-		intc: interrupt-controller@60001000 {
-			compatible = "arm,cortex-a9-gic";
-			reg = <0x60001000 0x1000>,
-			      <0x60000100 0x100>;
-			#interrupt-cells = <3>;
-			interrupt-controller;
-		};
-
-		soc-glue@5f800000 {
-			compatible = "socionext,uniphier-soc-glue",
-				     "simple-mfd", "syscon";
-			reg = <0x5f800000 0x2000>;
-
-			pinctrl: pinctrl {
-				/* specify compatible in each SoC DTSI */
-			};
-		};
-
-		sysctrl@61840000 {
-			compatible = "socionext,uniphier-sysctrl",
-				     "simple-mfd", "syscon";
-			reg = <0x61840000 0x4000>;
-
-			sys_clk: clock {
-				#clock-cells = <1>;
-			};
-
-			sys_rst: reset {
-				#reset-cells = <1>;
-			};
-		};
-	};
-};
-
-/include/ "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi
index 95f342c..a7c494d 100644
--- a/arch/arm/boot/dts/uniphier-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ld4.dtsi
@@ -43,7 +43,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-/include/ "uniphier-common32.dtsi"
+/include/ "skeleton.dtsi"
 
 / {
 	compatible = "socionext,uniphier-ld4";
@@ -61,147 +61,267 @@
 		};
 	};
 
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
 	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24576000>;
+		};
+
 		arm_timer_clk: arm_timer_clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
 	};
-};
 
-&soc {
-	l2: l2-cache@500c0000 {
-		compatible = "socionext,uniphier-system-cache";
-		reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
-		interrupts = <0 174 4>, <0 175 4>;
-		cache-unified;
-		cache-size = <(512 * 1024)>;
-		cache-sets = <256>;
-		cache-line-size = <128>;
-		cache-level = <2>;
-	};
-
-	i2c0: i2c@58400000 {
-		compatible = "socionext,uniphier-i2c";
-		status = "disabled";
-		reg = <0x58400000 0x40>;
+	soc {
+		compatible = "simple-bus";
 		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 41 1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c0>;
-		clocks = <&peri_clk 4>;
-		clock-frequency = <100000>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		l2: l2-cache@500c0000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
+			      <0x506c0000 0x400>;
+			interrupts = <0 174 4>, <0 175 4>;
+			cache-unified;
+			cache-size = <(512 * 1024)>;
+			cache-sets = <256>;
+			cache-line-size = <128>;
+			cache-level = <2>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 29 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+		};
+
+		i2c0: i2c@58400000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58400000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58480000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58480000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			clock-frequency = <100000>;
+		};
+
+		/* chip-internal connection for DMD */
+		i2c2: i2c@58500000 {
+			compatible = "socionext,uniphier-i2c";
+			reg = <0x58500000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			clocks = <&peri_clk 6>;
+			clock-frequency = <400000>;
+		};
+
+		i2c3: i2c@58580000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58580000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			clock-frequency = <100000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59800000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		mioctrl@59810000 {
+			compatible = "socionext,uniphier-ld4-mioctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x800>;
+
+			mio_clk: clock {
+				compatible = "socionext,uniphier-ld4-mio-clock";
+				#clock-cells = <1>;
+			};
+
+			mio_rst: reset {
+				compatible = "socionext,uniphier-ld4-mio-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-ld4-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-ld4-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-ld4-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		usb0: usb@5a800100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a800100 0x100>;
+			interrupts = <0 80 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
+				 <&mio_rst 12>;
+		};
+
+		usb1: usb@5a810100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a810100 0x100>;
+			interrupts = <0 81 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
+				 <&mio_rst 13>;
+		};
+
+		usb2: usb@5a820100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a820100 0x100>;
+			interrupts = <0 82 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2>;
+			clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
+				 <&mio_rst 14>;
+		};
+
+		soc-glue@5f800000 {
+			compatible = "socionext,uniphier-ld4-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-ld4-pinctrl";
+			};
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-ld4-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-ld4-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-ld4-reset";
+				#reset-cells = <1>;
+			};
+		};
 	};
-
-	i2c1: i2c@58480000 {
-		compatible = "socionext,uniphier-i2c";
-		status = "disabled";
-		reg = <0x58480000 0x40>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 42 1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c1>;
-		clocks = <&peri_clk 5>;
-		clock-frequency = <100000>;
-	};
-
-	/* chip-internal connection for DMD */
-	i2c2: i2c@58500000 {
-		compatible = "socionext,uniphier-i2c";
-		reg = <0x58500000 0x40>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 43 1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c2>;
-		clocks = <&peri_clk 6>;
-		clock-frequency = <400000>;
-	};
-
-	i2c3: i2c@58580000 {
-		compatible = "socionext,uniphier-i2c";
-		status = "disabled";
-		reg = <0x58580000 0x40>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 44 1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c3>;
-		clocks = <&peri_clk 7>;
-		clock-frequency = <100000>;
-	};
-
-	usb0: usb@5a800100 {
-		compatible = "socionext,uniphier-ehci", "generic-ehci";
-		status = "disabled";
-		reg = <0x5a800100 0x100>;
-		interrupts = <0 80 4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb0>;
-		clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
-		resets = <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>, <&sys_rst 8>;
-	};
-
-	usb1: usb@5a810100 {
-		compatible = "socionext,uniphier-ehci", "generic-ehci";
-		status = "disabled";
-		reg = <0x5a810100 0x100>;
-		interrupts = <0 81 4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb1>;
-		clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
-		resets = <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>, <&sys_rst 8>;
-	};
-
-	usb2: usb@5a820100 {
-		compatible = "socionext,uniphier-ehci", "generic-ehci";
-		status = "disabled";
-		reg = <0x5a820100 0x100>;
-		interrupts = <0 82 4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb2>;
-		clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
-		resets = <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>, <&sys_rst 8>;
-	};
-
 };
 
-&refclk {
-	clock-frequency = <24576000>;
-};
-
-&serial3 {
-	interrupts = <0 29 4>;
-};
-
-&mio_clk {
-	compatible = "socionext,uniphier-ld4-mio-clock";
-};
-
-&mio_rst {
-	compatible = "socionext,uniphier-ld4-mio-reset";
-	resets = <&sys_rst 7>;
-};
-
-&peri_clk {
-	compatible = "socionext,uniphier-ld4-peri-clock";
-};
-
-&peri_rst {
-	compatible = "socionext,uniphier-ld4-peri-reset";
-};
-
-&pinctrl {
-	compatible = "socionext,uniphier-ld4-pinctrl";
-};
-
-&sys_clk {
-	compatible = "socionext,uniphier-ld4-clock";
-};
-
-&sys_rst {
-	compatible = "socionext,uniphier-ld4-reset";
-};
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi
index ba70026..e960b09 100644
--- a/arch/arm/boot/dts/uniphier-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro4.dtsi
@@ -43,7 +43,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-/include/ "uniphier-common32.dtsi"
+/include/ "skeleton.dtsi"
 
 / {
 	compatible = "socionext,uniphier-pro4";
@@ -69,155 +69,279 @@
 		};
 	};
 
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
 	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+
 		arm_timer_clk: arm_timer_clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
 	};
-};
 
-&soc {
-	l2: l2-cache@500c0000 {
-		compatible = "socionext,uniphier-system-cache";
-		reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
-		interrupts = <0 174 4>, <0 175 4>;
-		cache-unified;
-		cache-size = <(768 * 1024)>;
-		cache-sets = <256>;
-		cache-line-size = <128>;
-		cache-level = <2>;
-	};
-
-	i2c0: i2c@58780000 {
-		compatible = "socionext,uniphier-fi2c";
-		status = "disabled";
-		reg = <0x58780000 0x80>;
+	soc {
+		compatible = "simple-bus";
 		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 41 4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c0>;
-		clocks = <&peri_clk 4>;
-		clock-frequency = <100000>;
-	};
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
 
-	i2c1: i2c@58781000 {
-		compatible = "socionext,uniphier-fi2c";
-		status = "disabled";
-		reg = <0x58781000 0x80>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 42 4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c1>;
-		clocks = <&peri_clk 5>;
-		clock-frequency = <100000>;
-	};
+		l2: l2-cache@500c0000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
+			      <0x506c0000 0x400>;
+			interrupts = <0 174 4>, <0 175 4>;
+			cache-unified;
+			cache-size = <(768 * 1024)>;
+			cache-sets = <256>;
+			cache-line-size = <128>;
+			cache-level = <2>;
+		};
 
-	i2c2: i2c@58782000 {
-		compatible = "socionext,uniphier-fi2c";
-		status = "disabled";
-		reg = <0x58782000 0x80>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 43 4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c2>;
-		clocks = <&peri_clk 6>;
-		clock-frequency = <100000>;
-	};
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+		};
 
-	i2c3: i2c@58783000 {
-		compatible = "socionext,uniphier-fi2c";
-		status = "disabled";
-		reg = <0x58783000 0x80>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 44 4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c3>;
-		clocks = <&peri_clk 7>;
-		clock-frequency = <100000>;
-	};
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+		};
 
-	/* i2c4 does not exist */
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+		};
 
-	/* chip-internal connection for DMD */
-	i2c5: i2c@58785000 {
-		compatible = "socionext,uniphier-fi2c";
-		reg = <0x58785000 0x80>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 25 4>;
-		clocks = <&peri_clk 9>;
-		clock-frequency = <400000>;
-	};
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 177 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+		};
 
-	/* chip-internal connection for HDMI */
-	i2c6: i2c@58786000 {
-		compatible = "socionext,uniphier-fi2c";
-		reg = <0x58786000 0x80>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 26 4>;
-		clocks = <&peri_clk 10>;
-		clock-frequency = <400000>;
-	};
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			clock-frequency = <100000>;
+		};
 
-	usb2: usb@5a800100 {
-		compatible = "socionext,uniphier-ehci", "generic-ehci";
-		status = "disabled";
-		reg = <0x5a800100 0x100>;
-		interrupts = <0 80 4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb2>;
-		clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
-		resets = <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>, <&sys_rst 8>;
-	};
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			clock-frequency = <100000>;
+		};
 
-	usb3: usb@5a810100 {
-		compatible = "socionext,uniphier-ehci", "generic-ehci";
-		status = "disabled";
-		reg = <0x5a810100 0x100>;
-		interrupts = <0 81 4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb3>;
-		clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
-		resets = <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>, <&sys_rst 8>;
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			clocks = <&peri_clk 6>;
+			clock-frequency = <100000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			clock-frequency = <100000>;
+		};
+
+		/* i2c4 does not exist */
+
+		/* chip-internal connection for DMD */
+		i2c5: i2c@58785000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58785000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 25 4>;
+			clocks = <&peri_clk 9>;
+			clock-frequency = <400000>;
+		};
+
+		/* chip-internal connection for HDMI */
+		i2c6: i2c@58786000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58786000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 26 4>;
+			clocks = <&peri_clk 10>;
+			clock-frequency = <400000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59800000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		mioctrl@59810000 {
+			compatible = "socionext,uniphier-pro4-mioctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x800>;
+
+			mio_clk: clock {
+				compatible = "socionext,uniphier-pro4-mio-clock";
+				#clock-cells = <1>;
+			};
+
+			mio_rst: reset {
+				compatible = "socionext,uniphier-pro4-mio-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-pro4-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-pro4-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-pro4-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		usb2: usb@5a800100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a800100 0x100>;
+			interrupts = <0 80 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2>;
+			clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
+				 <&mio_rst 12>;
+		};
+
+		usb3: usb@5a810100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a810100 0x100>;
+			interrupts = <0 81 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb3>;
+			clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
+				 <&mio_rst 13>;
+		};
+
+		soc-glue@5f800000 {
+			compatible = "socionext,uniphier-pro4-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-pro4-pinctrl";
+			};
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-pro4-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-pro4-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-pro4-reset";
+				#reset-cells = <1>;
+			};
+		};
 	};
 };
 
-&refclk {
-	clock-frequency = <25000000>;
-};
-
-&mio_clk {
-	compatible = "socionext,uniphier-pro4-mio-clock";
-};
-
-&mio_rst {
-	compatible = "socionext,uniphier-pro4-mio-reset";
-	resets = <&sys_rst 7>;
-};
-
-&peri_clk {
-	compatible = "socionext,uniphier-pro4-peri-clock";
-};
-
-&peri_rst {
-	compatible = "socionext,uniphier-pro4-peri-reset";
-};
-
-&pinctrl {
-	compatible = "socionext,uniphier-pro4-pinctrl";
-};
-
-&sys_clk {
-	compatible = "socionext,uniphier-pro4-clock";
-};
-
-&sys_rst {
-	compatible = "socionext,uniphier-pro4-reset";
-};
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi
index 5357ea9..dbc5e53 100644
--- a/arch/arm/boot/dts/uniphier-pro5.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro5.dtsi
@@ -43,7 +43,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-/include/ "uniphier-common32.dtsi"
+/include/ "skeleton.dtsi"
 
 / {
 	compatible = "socionext,uniphier-pro5";
@@ -56,157 +56,355 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			clocks = <&sys_clk 32>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu_opp>;
 		};
 
 		cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
+			clocks = <&sys_clk 32>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu_opp>;
 		};
 	};
 
+	cpu_opp: opp_table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@116667000 {
+			opp-hz = /bits/ 64 <116667000>;
+			clock-latency-ns = <300>;
+		};
+		opp@150000000 {
+			opp-hz = /bits/ 64 <150000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@175000000 {
+			opp-hz = /bits/ 64 <175000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@233334000 {
+			opp-hz = /bits/ 64 <233334000>;
+			clock-latency-ns = <300>;
+		};
+		opp@300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@350000000 {
+			opp-hz = /bits/ 64 <350000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@466667000 {
+			opp-hz = /bits/ 64 <466667000>;
+			clock-latency-ns = <300>;
+		};
+		opp@600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@933334000 {
+			opp-hz = /bits/ 64 <933334000>;
+			clock-latency-ns = <300>;
+		};
+		opp@1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			clock-latency-ns = <300>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
 	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <20000000>;
+		};
+
 		arm_timer_clk: arm_timer_clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
 	};
-};
 
-&soc {
-	l2: l2-cache@500c0000 {
-		compatible = "socionext,uniphier-system-cache";
-		reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, <0x506c0000 0x400>;
-		interrupts = <0 190 4>, <0 191 4>;
-		cache-unified;
-		cache-size = <(2 * 1024 * 1024)>;
-		cache-sets = <512>;
-		cache-line-size = <128>;
-		cache-level = <2>;
-		next-level-cache = <&l3>;
-	};
-
-	l3: l3-cache@500c8000 {
-		compatible = "socionext,uniphier-system-cache";
-		reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, <0x506c8000 0x400>;
-		interrupts = <0 174 4>, <0 175 4>;
-		cache-unified;
-		cache-size = <(2 * 1024 * 1024)>;
-		cache-sets = <512>;
-		cache-line-size = <256>;
-		cache-level = <3>;
-	};
-
-	i2c0: i2c@58780000 {
-		compatible = "socionext,uniphier-fi2c";
-		status = "disabled";
-		reg = <0x58780000 0x80>;
+	soc {
+		compatible = "simple-bus";
 		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 41 4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c0>;
-		clocks = <&peri_clk 4>;
-		clock-frequency = <100000>;
-	};
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
 
-	i2c1: i2c@58781000 {
-		compatible = "socionext,uniphier-fi2c";
-		status = "disabled";
-		reg = <0x58781000 0x80>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 42 4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c1>;
-		clocks = <&peri_clk 5>;
-		clock-frequency = <100000>;
-	};
+		l2: l2-cache@500c0000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
+			      <0x506c0000 0x400>;
+			interrupts = <0 190 4>, <0 191 4>;
+			cache-unified;
+			cache-size = <(2 * 1024 * 1024)>;
+			cache-sets = <512>;
+			cache-line-size = <128>;
+			cache-level = <2>;
+			next-level-cache = <&l3>;
+		};
 
-	i2c2: i2c@58782000 {
-		compatible = "socionext,uniphier-fi2c";
-		status = "disabled";
-		reg = <0x58782000 0x80>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 43 4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c2>;
-		clocks = <&peri_clk 6>;
-		clock-frequency = <100000>;
-	};
+		l3: l3-cache@500c8000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c8000 0x2000>, <0x503c8100 0x8>,
+			      <0x506c8000 0x400>;
+			interrupts = <0 174 4>, <0 175 4>;
+			cache-unified;
+			cache-size = <(2 * 1024 * 1024)>;
+			cache-sets = <512>;
+			cache-line-size = <256>;
+			cache-level = <3>;
+		};
 
-	i2c3: i2c@58783000 {
-		compatible = "socionext,uniphier-fi2c";
-		status = "disabled";
-		reg = <0x58783000 0x80>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 44 4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c3>;
-		clocks = <&peri_clk 7>;
-		clock-frequency = <100000>;
-	};
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+		};
 
-	/* i2c4 does not exist */
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+		};
 
-	/* chip-internal connection for DMD */
-	i2c5: i2c@58785000 {
-		compatible = "socionext,uniphier-fi2c";
-		reg = <0x58785000 0x80>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 25 4>;
-		clocks = <&peri_clk 9>;
-		clock-frequency = <400000>;
-	};
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+		};
 
-	/* chip-internal connection for HDMI */
-	i2c6: i2c@58786000 {
-		compatible = "socionext,uniphier-fi2c";
-		reg = <0x58786000 0x80>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 26 4>;
-		clocks = <&peri_clk 10>;
-		clock-frequency = <400000>;
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 177 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+		};
+
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			clocks = <&peri_clk 6>;
+			clock-frequency = <100000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			clock-frequency = <100000>;
+		};
+
+		/* i2c4 does not exist */
+
+		/* chip-internal connection for DMD */
+		i2c5: i2c@58785000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58785000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 25 4>;
+			clocks = <&peri_clk 9>;
+			clock-frequency = <400000>;
+		};
+
+		/* chip-internal connection for HDMI */
+		i2c6: i2c@58786000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58786000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 26 4>;
+			clocks = <&peri_clk 10>;
+			clock-frequency = <400000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59800000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		sdctrl@59810000 {
+			compatible = "socionext,uniphier-pro5-sdctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x800>;
+
+			sd_clk: clock {
+				compatible = "socionext,uniphier-pro5-sd-clock";
+				#clock-cells = <1>;
+			};
+
+			sd_rst: reset {
+				compatible = "socionext,uniphier-pro5-sd-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-pro5-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-pro5-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-pro5-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		soc-glue@5f800000 {
+			compatible = "socionext,uniphier-pro5-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-pro5-pinctrl";
+			};
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-pro5-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-pro5-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-pro5-reset";
+				#reset-cells = <1>;
+			};
+		};
 	};
 };
 
-&refclk {
-	clock-frequency = <20000000>;
-};
-
-&mio_clk {
-	compatible = "socionext,uniphier-pro5-sd-clock";
-};
-
-&mio_rst {
-	compatible = "socionext,uniphier-pro5-sd-reset";
-};
-
-&peri_clk {
-	compatible = "socionext,uniphier-pro5-peri-clock";
-};
-
-&peri_rst {
-	compatible = "socionext,uniphier-pro5-peri-reset";
-};
-
-&pinctrl {
-	compatible = "socionext,uniphier-pro5-pinctrl";
-};
-
-&sys_clk {
-	compatible = "socionext,uniphier-pro5-clock";
-};
-
-&sys_rst {
-	compatible = "socionext,uniphier-pro5-reset";
-};
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index 950f07b..e9e031d 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -43,7 +43,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-/include/ "uniphier-common32.dtsi"
+/include/ "skeleton.dtsi"
 
 / {
 	compatible = "socionext,uniphier-pxs2";
@@ -56,170 +56,339 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			clocks = <&sys_clk 32>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu_opp>;
 		};
 
 		cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
+			clocks = <&sys_clk 32>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu_opp>;
 		};
 
 		cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <2>;
+			clocks = <&sys_clk 32>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu_opp>;
 		};
 
 		cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <3>;
+			clocks = <&sys_clk 32>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu_opp>;
 		};
 	};
 
+	cpu_opp: opp_table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@150000000 {
+			opp-hz = /bits/ 64 <150000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			clock-latency-ns = <300>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
 	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+
 		arm_timer_clk: arm_timer_clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
 	};
-};
 
-&soc {
-	l2: l2-cache@500c0000 {
-		compatible = "socionext,uniphier-system-cache";
-		reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
-		interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>;
-		cache-unified;
-		cache-size = <(1280 * 1024)>;
-		cache-sets = <512>;
-		cache-line-size = <128>;
-		cache-level = <2>;
-	};
-
-	i2c0: i2c@58780000 {
-		compatible = "socionext,uniphier-fi2c";
-		status = "disabled";
-		reg = <0x58780000 0x80>;
+	soc {
+		compatible = "simple-bus";
 		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 41 4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c0>;
-		clocks = <&peri_clk 4>;
-		clock-frequency = <100000>;
-	};
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
 
-	i2c1: i2c@58781000 {
-		compatible = "socionext,uniphier-fi2c";
-		status = "disabled";
-		reg = <0x58781000 0x80>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 42 4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c1>;
-		clocks = <&peri_clk 5>;
-		clock-frequency = <100000>;
-	};
+		l2: l2-cache@500c0000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
+			      <0x506c0000 0x400>;
+			interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>;
+			cache-unified;
+			cache-size = <(1280 * 1024)>;
+			cache-sets = <512>;
+			cache-line-size = <128>;
+			cache-level = <2>;
+		};
 
-	i2c2: i2c@58782000 {
-		compatible = "socionext,uniphier-fi2c";
-		status = "disabled";
-		reg = <0x58782000 0x80>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c2>;
-		interrupts = <0 43 4>;
-		clocks = <&peri_clk 6>;
-		clock-frequency = <100000>;
-	};
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+		};
 
-	i2c3: i2c@58783000 {
-		compatible = "socionext,uniphier-fi2c";
-		status = "disabled";
-		reg = <0x58783000 0x80>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 44 4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c3>;
-		clocks = <&peri_clk 7>;
-		clock-frequency = <100000>;
-	};
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+		};
 
-	/* chip-internal connection for DMD */
-	i2c4: i2c@58784000 {
-		compatible = "socionext,uniphier-fi2c";
-		reg = <0x58784000 0x80>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 45 4>;
-		clocks = <&peri_clk 8>;
-		clock-frequency = <400000>;
-	};
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+		};
 
-	/* chip-internal connection for STM */
-	i2c5: i2c@58785000 {
-		compatible = "socionext,uniphier-fi2c";
-		reg = <0x58785000 0x80>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 25 4>;
-		clocks = <&peri_clk 9>;
-		clock-frequency = <400000>;
-	};
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 177 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+		};
 
-	/* chip-internal connection for HDMI */
-	i2c6: i2c@58786000 {
-		compatible = "socionext,uniphier-fi2c";
-		reg = <0x58786000 0x80>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 26 4>;
-		clocks = <&peri_clk 10>;
-		clock-frequency = <400000>;
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			clocks = <&peri_clk 6>;
+			clock-frequency = <100000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			clock-frequency = <100000>;
+		};
+
+		/* chip-internal connection for DMD */
+		i2c4: i2c@58784000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58784000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 45 4>;
+			clocks = <&peri_clk 8>;
+			clock-frequency = <400000>;
+		};
+
+		/* chip-internal connection for STM */
+		i2c5: i2c@58785000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58785000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 25 4>;
+			clocks = <&peri_clk 9>;
+			clock-frequency = <400000>;
+		};
+
+		/* chip-internal connection for HDMI */
+		i2c6: i2c@58786000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58786000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 26 4>;
+			clocks = <&peri_clk 10>;
+			clock-frequency = <400000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59800000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		sdctrl@59810000 {
+			compatible = "socionext,uniphier-pxs2-sdctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x800>;
+
+			sd_clk: clock {
+				compatible = "socionext,uniphier-pxs2-sd-clock";
+				#clock-cells = <1>;
+			};
+
+			sd_rst: reset {
+				compatible = "socionext,uniphier-pxs2-sd-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-pxs2-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-pxs2-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-pxs2-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		soc-glue@5f800000 {
+			compatible = "socionext,uniphier-pxs2-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-pxs2-pinctrl";
+			};
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0xf04>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0xf04>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-pxs2-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-pxs2-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-pxs2-reset";
+				#reset-cells = <1>;
+			};
+		};
 	};
 };
 
-&refclk {
-	clock-frequency = <25000000>;
-};
-
-&mio_clk {
-	compatible = "socionext,uniphier-pxs2-sd-clock";
-};
-
-&mio_rst {
-	compatible = "socionext,uniphier-pxs2-sd-reset";
-};
-
-&peri_clk {
-	compatible = "socionext,uniphier-pxs2-peri-clock";
-};
-
-&peri_rst {
-	compatible = "socionext,uniphier-pxs2-peri-reset";
-};
-
-&pinctrl {
-	compatible = "socionext,uniphier-pxs2-pinctrl";
-};
-
-&sys_clk {
-	compatible = "socionext,uniphier-pxs2-clock";
-};
-
-&sys_rst {
-	compatible = "socionext,uniphier-pxs2-reset";
-};
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-sld3.dtsi b/arch/arm/boot/dts/uniphier-sld3.dtsi
index 5fa96c9..9fad6bd 100644
--- a/arch/arm/boot/dts/uniphier-sld3.dtsi
+++ b/arch/arm/boot/dts/uniphier-sld3.dtsi
@@ -135,7 +135,6 @@
 			reg = <0x54006800 0x40>;
 			interrupts = <0 33 4>;
 			clocks = <&sys_clk 0>;
-			fifo-size = <64>;
 		};
 
 		serial1: serial@54006900 {
@@ -144,7 +143,6 @@
 			reg = <0x54006900 0x40>;
 			interrupts = <0 35 4>;
 			clocks = <&sys_clk 0>;
-			fifo-size = <64>;
 		};
 
 		serial2: serial@54006a00 {
@@ -153,7 +151,6 @@
 			reg = <0x54006a00 0x40>;
 			interrupts = <0 37 4>;
 			clocks = <&sys_clk 0>;
-			fifo-size = <64>;
 		};
 
 		i2c0: i2c@58400000 {
@@ -225,7 +222,7 @@
 		};
 
 		mioctrl@59810000 {
-			compatible = "socionext,uniphier-mioctrl",
+			compatible = "socionext,uniphier-sld3-mioctrl",
 				     "simple-mfd", "syscon";
 			reg = <0x59810000 0x800>;
 
@@ -245,6 +242,9 @@
 			status = "disabled";
 			reg = <0x5a800100 0x100>;
 			interrupts = <0 80 4>;
+			clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
+				 <&mio_rst 12>;
 		};
 
 		usb1: usb@5a810100 {
@@ -252,6 +252,9 @@
 			status = "disabled";
 			reg = <0x5a810100 0x100>;
 			interrupts = <0 81 4>;
+			clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
+				 <&mio_rst 13>;
 		};
 
 		usb2: usb@5a820100 {
@@ -259,6 +262,9 @@
 			status = "disabled";
 			reg = <0x5a820100 0x100>;
 			interrupts = <0 82 4>;
+			clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
+				 <&mio_rst 14>;
 		};
 
 		usb3: usb@5a830100 {
@@ -266,12 +272,15 @@
 			status = "disabled";
 			reg = <0x5a830100 0x100>;
 			interrupts = <0 83 4>;
+			clocks = <&mio_clk 7>, <&mio_clk 11>, <&mio_clk 15>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 11>,
+				 <&mio_rst 15>;
 		};
 
 		sysctrl@f1840000 {
-			compatible = "socionext,uniphier-sysctrl",
+			compatible = "socionext,uniphier-sld3-sysctrl",
 				     "simple-mfd", "syscon";
-			reg = <0xf1840000 0x4000>;
+			reg = <0xf1840000 0x10000>;
 
 			sys_clk: clock {
 				compatible = "socionext,uniphier-sld3-clock";
diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi
index d8cf0e7..b2c980e 100644
--- a/arch/arm/boot/dts/uniphier-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-sld8.dtsi
@@ -43,7 +43,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-/include/ "uniphier-common32.dtsi"
+/include/ "skeleton.dtsi"
 
 / {
 	compatible = "socionext,uniphier-sld8";
@@ -61,146 +61,267 @@
 		};
 	};
 
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
 	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+
 		arm_timer_clk: arm_timer_clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
 	};
-};
 
-&soc {
-	l2: l2-cache@500c0000 {
-		compatible = "socionext,uniphier-system-cache";
-		reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
-		interrupts = <0 174 4>, <0 175 4>;
-		cache-unified;
-		cache-size = <(256 * 1024)>;
-		cache-sets = <256>;
-		cache-line-size = <128>;
-		cache-level = <2>;
-	};
-
-	i2c0: i2c@58400000 {
-		compatible = "socionext,uniphier-i2c";
-		status = "disabled";
-		reg = <0x58400000 0x40>;
+	soc {
+		compatible = "simple-bus";
 		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 41 1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c0>;
-		clocks = <&peri_clk 4>;
-		clock-frequency = <100000>;
-	};
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
 
-	i2c1: i2c@58480000 {
-		compatible = "socionext,uniphier-i2c";
-		status = "disabled";
-		reg = <0x58480000 0x40>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 42 1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c1>;
-		clocks = <&peri_clk 5>;
-		clock-frequency = <100000>;
-	};
+		l2: l2-cache@500c0000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
+			      <0x506c0000 0x400>;
+			interrupts = <0 174 4>, <0 175 4>;
+			cache-unified;
+			cache-size = <(256 * 1024)>;
+			cache-sets = <256>;
+			cache-line-size = <128>;
+			cache-level = <2>;
+		};
 
-	/* chip-internal connection for DMD */
-	i2c2: i2c@58500000 {
-		compatible = "socionext,uniphier-i2c";
-		reg = <0x58500000 0x40>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 43 1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c2>;
-		clocks = <&peri_clk 6>;
-		clock-frequency = <400000>;
-	};
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+		};
 
-	i2c3: i2c@58580000 {
-		compatible = "socionext,uniphier-i2c";
-		status = "disabled";
-		reg = <0x58580000 0x40>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 44 1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c3>;
-		clocks = <&peri_clk 7>;
-		clock-frequency = <100000>;
-	};
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+		};
 
-	usb0: usb@5a800100 {
-		compatible = "socionext,uniphier-ehci", "generic-ehci";
-		status = "disabled";
-		reg = <0x5a800100 0x100>;
-		interrupts = <0 80 4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb0>;
-		clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
-		resets = <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>, <&sys_rst 8>;
-	};
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+		};
 
-	usb1: usb@5a810100 {
-		compatible = "socionext,uniphier-ehci", "generic-ehci";
-		status = "disabled";
-		reg = <0x5a810100 0x100>;
-		interrupts = <0 81 4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb1>;
-		clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
-		resets = <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>, <&sys_rst 8>;
-	};
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 29 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+		};
 
-	usb2: usb@5a820100 {
-		compatible = "socionext,uniphier-ehci", "generic-ehci";
-		status = "disabled";
-		reg = <0x5a820100 0x100>;
-		interrupts = <0 82 4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb2>;
-		clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
-		resets = <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>, <&sys_rst 8>;
+		i2c0: i2c@58400000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58400000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58480000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58480000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			clock-frequency = <100000>;
+		};
+
+		/* chip-internal connection for DMD */
+		i2c2: i2c@58500000 {
+			compatible = "socionext,uniphier-i2c";
+			reg = <0x58500000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			clocks = <&peri_clk 6>;
+			clock-frequency = <400000>;
+		};
+
+		i2c3: i2c@58580000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58580000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			clock-frequency = <100000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59800000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		mioctrl@59810000 {
+			compatible = "socionext,uniphier-sld8-mioctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x800>;
+
+			mio_clk: clock {
+				compatible = "socionext,uniphier-sld8-mio-clock";
+				#clock-cells = <1>;
+			};
+
+			mio_rst: reset {
+				compatible = "socionext,uniphier-sld8-mio-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-sld8-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-sld8-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-sld8-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		usb0: usb@5a800100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a800100 0x100>;
+			interrupts = <0 80 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
+				 <&mio_rst 12>;
+		};
+
+		usb1: usb@5a810100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a810100 0x100>;
+			interrupts = <0 81 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
+				 <&mio_rst 13>;
+		};
+
+		usb2: usb@5a820100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a820100 0x100>;
+			interrupts = <0 82 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2>;
+			clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
+				 <&mio_rst 14>;
+		};
+
+		soc-glue@5f800000 {
+			compatible = "socionext,uniphier-sld8-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-sld8-pinctrl";
+			};
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-sld8-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-sld8-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-sld8-reset";
+				#reset-cells = <1>;
+			};
+		};
 	};
 };
 
-&refclk {
-	clock-frequency = <25000000>;
-};
-
-&serial3 {
-	interrupts = <0 29 4>;
-};
-
-&mio_clk {
-	compatible = "socionext,uniphier-sld8-mio-clock";
-};
-
-&mio_rst {
-	compatible = "socionext,uniphier-sld8-mio-reset";
-	resets = <&sys_rst 7>;
-};
-
-&peri_clk {
-	compatible = "socionext,uniphier-sld8-peri-clock";
-};
-
-&peri_rst {
-	compatible = "socionext,uniphier-sld8-peri-reset";
-};
-
-&pinctrl {
-	compatible = "socionext,uniphier-sld8-pinctrl";
-};
-
-&sys_clk {
-	compatible = "socionext,uniphier-sld8-clock";
-};
-
-&sys_rst {
-	compatible = "socionext,uniphier-sld8-reset";
-};
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index 0205c97..45d08cc 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -39,6 +39,7 @@
 			reg = <0>;
 			cci-control-port = <&cci_control1>;
 			cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
+			capacity-dmips-mhz = <1024>;
 		};
 
 		cpu1: cpu@1 {
@@ -47,6 +48,7 @@
 			reg = <1>;
 			cci-control-port = <&cci_control1>;
 			cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
+			capacity-dmips-mhz = <1024>;
 		};
 
 		cpu2: cpu@2 {
@@ -55,6 +57,7 @@
 			reg = <0x100>;
 			cci-control-port = <&cci_control2>;
 			cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
+			capacity-dmips-mhz = <516>;
 		};
 
 		cpu3: cpu@3 {
@@ -63,6 +66,7 @@
 			reg = <0x101>;
 			cci-control-port = <&cci_control2>;
 			cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
+			capacity-dmips-mhz = <516>;
 		};
 
 		cpu4: cpu@4 {
@@ -71,6 +75,7 @@
 			reg = <0x102>;
 			cci-control-port = <&cci_control2>;
 			cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
+			capacity-dmips-mhz = <516>;
 		};
 
 		idle-states {
diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi
index b741709..21bfef9 100644
--- a/arch/arm/boot/dts/vf-colibri.dtsi
+++ b/arch/arm/boot/dts/vf-colibri.dtsi
@@ -108,6 +108,10 @@
 	status = "okay";
 };
 
+&edma1 {
+	status = "okay";
+};
+
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
index 1552db0..7ea617e 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
@@ -538,13 +538,6 @@
 	};
 };
 
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart0>;
@@ -714,13 +707,6 @@
 		>;
 	};
 
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			VF610_PAD_PTA30__I2C3_SCL	0x37ff
-			VF610_PAD_PTA31__I2C3_SDA	0x37ff
-		>;
-	};
-
 	pinctrl_leds_debug: pinctrl-leds-debug {
 		fsl,pins = <
 			 VF610_PAD_PTD20__GPIO_74	0x31c2
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 2c13ec6..e9d2847 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -194,6 +194,9 @@
 				clocks = <&clks VF610_CLK_DSPI0>;
 				clock-names = "dspi";
 				spi-num-chipselects = <6>;
+				dmas = <&edma1 1 12>,
+					<&edma1 1 13>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -206,6 +209,9 @@
 				clocks = <&clks VF610_CLK_DSPI1>;
 				clock-names = "dspi";
 				spi-num-chipselects = <4>;
+				dmas = <&edma1 1 14>,
+					<&edma1 1 15>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -520,6 +526,12 @@
 				status = "disabled";
 			};
 
+			ocotp: ocotp@400a5000 {
+				compatible = "fsl,vf610-ocotp";
+				reg = <0x400a5000 0x1000>;
+				clocks = <&clks VF610_CLK_OCOTP>;
+			};
+
 			snvs0: snvs@400a7000 {
 			    compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
 				reg = <0x400a7000 0x2000>;
@@ -561,6 +573,9 @@
 				clocks = <&clks VF610_CLK_DSPI2>;
 				clock-names = "dspi";
 				spi-num-chipselects = <2>;
+				dmas = <&edma1 0 10>,
+					<&edma1 0 11>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -573,6 +588,9 @@
 				clocks = <&clks VF610_CLK_DSPI3>;
 				clock-names = "dspi";
 				spi-num-chipselects = <2>;
+				dmas = <&edma1 0 12>,
+					<&edma1 0 13>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index f283ff0..f3ac9bf 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -10,9 +10,10 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */
-/include/ "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "xlnx,zynq-7000";
 
 	cpus {
@@ -41,14 +42,15 @@
 		};
 	};
 
-	pmu {
+	pmu@f8891000 {
 		compatible = "arm,cortex-a9-pmu";
 		interrupts = <0 5 4>, <0 6 4>;
 		interrupt-parent = <&intc>;
-		reg = < 0xf8891000 0x1000 0xf8893000 0x1000 >;
+		reg = <0xf8891000 0x1000>,
+		      <0xf8893000 0x1000>;
 	};
 
-	regulator_vccpint: fixedregulator@0 {
+	regulator_vccpint: fixedregulator {
 		compatible = "regulator-fixed";
 		regulator-name = "VCCPINT";
 		regulator-min-microvolt = <1000000>;
diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
new file mode 100644
index 0000000..b9376a4
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-microzed.dts
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) 2011 - 2014 Xilinx
+ * Copyright (C) 2016 Jagan Teki <jteki@openedev.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+	model = "Zynq MicroZED Development Board";
+	compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+};
+
+&pinctrl0 {
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO29", "MIO31", "MIO36";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
+			       "MIO35", "MIO37", "MIO38", "MIO39";
+			bias-disable;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts
index 307ed20..64a6390 100644
--- a/arch/arm/boot/dts/zynq-parallella.dts
+++ b/arch/arm/boot/dts/zynq-parallella.dts
@@ -28,7 +28,7 @@
 		serial0 = &uart1;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x40000000>;
 	};
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index e96959b..0cdad2c 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -24,7 +24,7 @@
 		serial0 = &uart1;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x40000000>;
 	};
diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
index be6a986..ad4bb06 100644
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -24,7 +24,7 @@
 		serial0 = &uart1;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x40000000>;
 	};
diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts
index 7250c1e..325379f 100644
--- a/arch/arm/boot/dts/zynq-zed.dts
+++ b/arch/arm/boot/dts/zynq-zed.dts
@@ -23,7 +23,7 @@
 		serial0 = &uart1;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x20000000>;
 	};
diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/zynq-zybo.dts
index d9e0f3e..590ec24 100644
--- a/arch/arm/boot/dts/zynq-zybo.dts
+++ b/arch/arm/boot/dts/zynq-zybo.dts
@@ -23,7 +23,7 @@
 		serial0 = &uart1;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x20000000>;
 	};
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index e0ea603..470461d 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -364,6 +364,7 @@
 			reg = <0x0 0xf7010000  0x0 0x27c>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+			#pinctrl-cells = <1>;
 			#gpio-range-cells = <3>;
 			pinctrl-single,register-width = <32>;
 			pinctrl-single,function-mask = <7>;
@@ -402,6 +403,7 @@
 			reg = <0x0 0xf7010800 0x0 0x28c>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+			#pinctrl-cells = <1>;
 			pinctrl-single,register-width = <32>;
 		};
 
@@ -410,6 +412,7 @@
 			reg = <0x0 0xf8001800 0x0 0x78>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+			#pinctrl-cells = <1>;
 			pinctrl-single,register-width = <32>;
 		};
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index c2d588c..9c9fccb 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -450,6 +450,9 @@
 		auxadc: auxadc@11001000 {
 			compatible = "mediatek,mt8173-auxadc";
 			reg = <0 0x11001000 0 0x1000>;
+			clocks = <&pericfg CLK_PERI_AUXADC>;
+			clock-names = "main";
+			#io-channel-cells = <1>;
 		};
 
 		uart0: serial@11002000 {
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
index 1bb38d0..85d0091 100644
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -75,12 +75,6 @@ enum bcm2835_pinconf_param {
 	BCM2835_PINCONF_PARAM_PULL,
 };
 
-enum bcm2835_pinconf_pull {
-	BCM2835_PINCONFIG_PULL_NONE,
-	BCM2835_PINCONFIG_PULL_DOWN,
-	BCM2835_PINCONFIG_PULL_UP,
-};
-
 #define BCM2835_PINCONF_PACK(_param_, _arg_) ((_param_) << 16 | (_arg_))
 #define BCM2835_PINCONF_UNPACK_PARAM(_conf_) ((_conf_) >> 16)
 #define BCM2835_PINCONF_UNPACK_ARG(_conf_) ((_conf_) & 0xffff)
diff --git a/include/dt-bindings/clock/r7s72100-clock.h b/include/dt-bindings/clock/r7s72100-clock.h
index 3cd8138..29e01ed 100644
--- a/include/dt-bindings/clock/r7s72100-clock.h
+++ b/include/dt-bindings/clock/r7s72100-clock.h
@@ -28,6 +28,9 @@
 /* MSTP7 */
 #define R7S72100_CLK_ETHER	4
 
+/* MSTP8 */
+#define R7S72100_CLK_MMCIF	4
+
 /* MSTP9 */
 #define R7S72100_CLK_I2C0	7
 #define R7S72100_CLK_I2C1	6
@@ -41,4 +44,8 @@
 #define R7S72100_CLK_SPI3	4
 #define R7S72100_CLK_SPI4	3
 
+/* MSTP12 */
+#define R7S72100_CLK_SDHI0	3
+#define R7S72100_CLK_SDHI1	2
+
 #endif /* __DT_BINDINGS_CLOCK_R7S72100_H__ */
diff --git a/include/dt-bindings/clock/r8a7794-clock.h b/include/dt-bindings/clock/r8a7794-clock.h
index 9d02f53..88e6484 100644
--- a/include/dt-bindings/clock/r8a7794-clock.h
+++ b/include/dt-bindings/clock/r8a7794-clock.h
@@ -20,8 +20,7 @@
 #define R8A7794_CLK_QSPI		5
 #define R8A7794_CLK_SDH			6
 #define R8A7794_CLK_SD0			7
-#define R8A7794_CLK_Z			8
-#define R8A7794_CLK_RCAN		9
+#define R8A7794_CLK_RCAN		8
 
 /* MSTP0 */
 #define R8A7794_CLK_MSIOF0		0
diff --git a/include/dt-bindings/clock/stih415-clks.h b/include/dt-bindings/clock/stih415-clks.h
deleted file mode 100644
index d80caa6..0000000
--- a/include/dt-bindings/clock/stih415-clks.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * This header provides constants clk index STMicroelectronics
- * STiH415 SoC.
- */
-#ifndef _CLK_STIH415
-#define _CLK_STIH415
-
-/* CLOCKGEN A0 */
-#define CLK_ICN_REG		0
-#define CLK_ETH1_PHY		4
-
-/* CLOCKGEN A1 */
-#define CLK_ICN_IF_2		0
-#define CLK_GMAC0_PHY		3
-
-#endif
diff --git a/include/dt-bindings/mfd/tps65217.h b/include/dt-bindings/mfd/tps65217.h
new file mode 100644
index 0000000..cafb9e6
--- /dev/null
+++ b/include/dt-bindings/mfd/tps65217.h
@@ -0,0 +1,26 @@
+/*
+ * This header provides macros for TI TPS65217 DT bindings.
+ *
+ * Copyright (C) 2016 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __DT_BINDINGS_TPS65217_H__
+#define __DT_BINDINGS_TPS65217_H__
+
+#define TPS65217_IRQ_USB	0
+#define TPS65217_IRQ_AC		1
+#define TPS65217_IRQ_PB		2
+
+#endif
diff --git a/include/dt-bindings/pinctrl/bcm2835.h b/include/dt-bindings/pinctrl/bcm2835.h
index 6f0bc37..e4e4fdf 100644
--- a/include/dt-bindings/pinctrl/bcm2835.h
+++ b/include/dt-bindings/pinctrl/bcm2835.h
@@ -24,4 +24,9 @@
 #define BCM2835_FSEL_ALT2	6
 #define BCM2835_FSEL_ALT3	7
 
+/* brcm,pull property */
+#define BCM2835_PUD_OFF		0
+#define BCM2835_PUD_DOWN	1
+#define BCM2835_PUD_UP		2
+
 #endif /* __DT_BINDINGS_PINCTRL_BCM2835_H__ */
diff --git a/include/dt-bindings/pinctrl/rockchip.h b/include/dt-bindings/pinctrl/rockchip.h
index 743e66a..aaec8ba 100644
--- a/include/dt-bindings/pinctrl/rockchip.h
+++ b/include/dt-bindings/pinctrl/rockchip.h
@@ -25,6 +25,39 @@
 #define RK_GPIO4	4
 #define RK_GPIO6	6
 
+#define RK_PA0		0
+#define RK_PA1		1
+#define RK_PA2		2
+#define RK_PA3		3
+#define RK_PA4		4
+#define RK_PA5		5
+#define RK_PA6		6
+#define RK_PA7		7
+#define RK_PB0		8
+#define RK_PB1		9
+#define RK_PB2		10
+#define RK_PB3		11
+#define RK_PB4		12
+#define RK_PB5		13
+#define RK_PB6		14
+#define RK_PB7		15
+#define RK_PC0		16
+#define RK_PC1		17
+#define RK_PC2		18
+#define RK_PC3		19
+#define RK_PC4		20
+#define RK_PC5		21
+#define RK_PC6		22
+#define RK_PC7		23
+#define RK_PD0		24
+#define RK_PD1		25
+#define RK_PD2		26
+#define RK_PD3		27
+#define RK_PD4		28
+#define RK_PD5		29
+#define RK_PD6		30
+#define RK_PD7		31
+
 #define RK_FUNC_GPIO	0
 #define RK_FUNC_1	1
 #define RK_FUNC_2	2
diff --git a/include/dt-bindings/power/mt2701-power.h b/include/dt-bindings/power/mt2701-power.h
new file mode 100644
index 0000000..64cc826
--- /dev/null
+++ b/include/dt-bindings/power/mt2701-power.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2015 MediaTek Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_POWER_MT2701_POWER_H
+#define _DT_BINDINGS_POWER_MT2701_POWER_H
+
+#define MT2701_POWER_DOMAIN_CONN	0
+#define MT2701_POWER_DOMAIN_DISP	1
+#define MT2701_POWER_DOMAIN_MFG		2
+#define MT2701_POWER_DOMAIN_VDEC	3
+#define MT2701_POWER_DOMAIN_ISP		4
+#define MT2701_POWER_DOMAIN_BDP		5
+#define MT2701_POWER_DOMAIN_ETH		6
+#define MT2701_POWER_DOMAIN_HIF		7
+#define MT2701_POWER_DOMAIN_IFR_MSC	8
+
+#endif /* _DT_BINDINGS_POWER_MT2701_POWER_H */
diff --git a/include/dt-bindings/power/r8a7743-sysc.h b/include/dt-bindings/power/r8a7743-sysc.h
new file mode 100644
index 0000000..61cfbb2
--- /dev/null
+++ b/include/dt-bindings/power/r8a7743-sysc.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __DT_BINDINGS_POWER_R8A7743_SYSC_H__
+#define __DT_BINDINGS_POWER_R8A7743_SYSC_H__
+
+/*
+ * These power domain indices match the numbers of the interrupt bits
+ * representing the power areas in the various Interrupt Registers
+ * (e.g. SYSCISR, Interrupt Status Register)
+ */
+
+#define R8A7743_PD_CA15_CPU0		 0
+#define R8A7743_PD_CA15_CPU1		 1
+#define R8A7743_PD_CA15_SCU		12
+#define R8A7743_PD_SGX			20
+
+/* Always-on power area */
+#define R8A7743_PD_ALWAYS_ON		32
+
+#endif /* __DT_BINDINGS_POWER_R8A7743_SYSC_H__ */
diff --git a/include/dt-bindings/power/r8a7745-sysc.h b/include/dt-bindings/power/r8a7745-sysc.h
new file mode 100644
index 0000000..1844c11
--- /dev/null
+++ b/include/dt-bindings/power/r8a7745-sysc.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __DT_BINDINGS_POWER_R8A7745_SYSC_H__
+#define __DT_BINDINGS_POWER_R8A7745_SYSC_H__
+
+/*
+ * These power domain indices match the numbers of the interrupt bits
+ * representing the power areas in the various Interrupt Registers
+ * (e.g. SYSCISR, Interrupt Status Register)
+ */
+
+#define R8A7745_PD_CA7_CPU0		 5
+#define R8A7745_PD_CA7_CPU1		 6
+#define R8A7745_PD_SGX			20
+#define R8A7745_PD_CA7_SCU		21
+
+/* Always-on power area */
+#define R8A7745_PD_ALWAYS_ON		32
+
+#endif /* __DT_BINDINGS_POWER_R8A7745_SYSC_H__ */