/*
 * Copyright (C) 2017 MediaTek Inc.
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 */


#include <linux/clk.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/slab.h>
#include <linux/phy/phy.h>
#include <dt-bindings/phy/phy.h>
#include <linux/delay.h>

#include "phy-mtk.h"

#ifdef CONFIG_MTK_USB2JTAG_SUPPORT
#include <mt-plat/mtk_usb2jtag.h>
#endif

#define MTK_USB_PHY_BASE		(phy_drv->phy_base)
#define MTK_USB_PHY_PORT_BASE	(instance->port_base)
#define MTK_USB_PHY_MISC_BASE   (instance->sif_misc)
#define MTK_USB_PHY_FMREG_BASE	(instance->sif_fmreg)
#define MTK_USB_PHY_SPLLC_BASE	(instance->sif_spllc)
#define MTK_USB_PHY_U2_BASE		(instance->sif_u2phy_com)
#define MTK_USB_PHY_CHIP_BASE	(instance->sif_chip)
#define MTK_USB_PHY_U3PHYD_BASE	(instance->sif_u3phyd)
#define MTK_USB_PHY_B2_BASE		(instance->sif_u3phyd_bank2)
#define MTK_USB_PHY_PHYA_BASE	(instance->sif_u3phya)
#define MTK_USB_PHY_PHYA_DA_BASE	(instance->sif_u3phya_da)

#include "phy-mtk-ssusb-reg.h"

static DEFINE_MUTEX(prepare_lock);

enum mt_phy_version {
	MT_PHY_V1 = 1,
	MT_PHY_V2,
};

static bool usb_enable_clock(struct mtk_phy_drv *u3phy, bool enable)
{
	static int count;

	if (!u3phy->clk)
		return false;

	mutex_lock(&prepare_lock);
	phy_printk(K_INFO, "CG, enable<%d>, count<%d>\n", enable, count);

	if (enable && count == 0) {
		if (clk_prepare_enable(u3phy->clk) != 0)
			phy_printk(K_ERR, "clk enable fail\n");
	} else if (!enable && count == 1) {
		clk_disable_unprepare(u3phy->clk);
	}

	if (enable)
		count++;
	else
		count = (count == 0) ? 0 : (count - 1);

	mutex_unlock(&prepare_lock);
	return true;
}

static void u3phywrite32(void __iomem *addr, int offset, int mask, int value)
{
	int cur_value;
	int new_value;

	cur_value = readl(addr);
	new_value = (cur_value & (~mask)) | ((value << offset) & mask);
	writel(new_value, addr);
}

static int u3phyread32(void __iomem *addr)
{
	return readl(addr);
}

static void phy_advance_settings(struct mtk_phy_instance *instance)
{
	/* special request from DE */
	u32 val, offset;

	/* RG_SSUSB_TX_EIDLE_CM, 0x11F40B20[31:28] */
	/* 4'b1000, ssusb_USB30_PHYA_regmap_T12FF_TPHY */
	val = 0x8;
	offset = 0x20;
	u3phywrite32(
		(MTK_USB_PHY_PHYA_BASE + offset), 28,
		(0xf<<28), val);

	/* rg_ssusb_cdr_bir_ltr, 0x11F4095C[20:16]  5'b01101 */
	/* ssusb_USB30_PHYD_regmap_T12FF_TPHY */
	val = 0xd;
	offset = 0x5c;
	u3phywrite32(
		(MTK_USB_PHY_U3PHYD_BASE + offset), 16,
		(0x1f<<16), val);
}

static void phy_efuse_settings(struct mtk_phy_instance *instance)
{
	u32 evalue;

	evalue = (get_devinfo_with_index(108) & (0x1f<<0)) >> 0;
	/*#Dongru.Zhao@BSP.CHG.Basic, 2020/08/10, zdr Add for USB phy_tuning .*/
	evalue = 0x1E;
	/*END*/
	if (evalue) {
		phy_printk(K_INFO, "RG_USB20_INTR_CAL=0x%x\n",
			evalue);
		u3phywrite32(U3D_USBPHYACR1,
			RG_USB20_INTR_CAL_OFST,
			RG_USB20_INTR_CAL, evalue);
	}
	evalue = (get_devinfo_with_index(107) & (0x3f << 16)) >> 16;
	if (evalue) {
		phy_printk(K_INFO, "RG_SSUSB_IEXT_INTR_CTRL=0x%x\n",
			evalue);
		u3phywrite32(U3D_USB30_PHYA_REG0,
			RG_SSUSB_IEXT_INTR_CTRL_OFST,
			RG_SSUSB_IEXT_INTR_CTRL, evalue);
	}
	evalue = (get_devinfo_with_index(107) & (0x1f << 8)) >> 8;
	if (evalue) {
		phy_printk(K_INFO, "rg_ssusb_rx_impsel=0x%x\n",
			evalue);
		u3phywrite32(U3D_PHYD_IMPCAL1,
			RG_SSUSB_RX_IMPSEL_OFST,
			RG_SSUSB_RX_IMPSEL, evalue);
	}
	evalue = (get_devinfo_with_index(107) & (0x1f << 0)) >> 0;
	if (evalue) {
		phy_printk(K_INFO, "g_ssusb_tx_impsel=0x%x (R50)\n",
			evalue);

		if (evalue < 6)
			evalue += 2;
		else if (evalue >= 6 && evalue < 15)
			evalue += 3;
		else
			evalue = 15;
		phy_printk(K_INFO, "g_ssusb_tx_impsel=0x%x (R45)\n",
			evalue);
		u3phywrite32(U3D_PHYD_IMPCAL0,
			RG_SSUSB_TX_IMPSEL_OFST,
			RG_SSUSB_TX_IMPSEL, evalue);
	}
}

static int phy_slew_rate_calibration(struct mtk_phy_instance *instance)
{
	int i = 0;
	int fgRet = 0;
	int u4FmOut = 0;
	int u4Tmp = 0;

	phy_printk(K_DEBUG, "%s\n", __func__);

	/* enable USB ring oscillator */
	u3phywrite32(U3D_USBPHYACR5, RG_USB20_HSTX_SRCAL_EN_OFST,
		RG_USB20_HSTX_SRCAL_EN, 1);

	/* wait 1us */
	udelay(1);

	/* Enable free run clock */
	u3phywrite32(RG_SSUSB_SIFSLV_FMMONR1, RG_FRCK_EN_OFST,
		RG_FRCK_EN, 0x1);
	/* Setting cyclecnt */
	u3phywrite32(RG_SSUSB_SIFSLV_FMCR0, RG_CYCLECNT_OFST,
		RG_CYCLECNT, 0x400);
	/* Enable frequency meter */
	u3phywrite32(RG_SSUSB_SIFSLV_FMCR0, RG_FREQDET_EN_OFST,
		RG_FREQDET_EN, 0x1);
	phy_printk(K_DEBUG, "Freq_Valid=(0x%08X)\n",
		u3phyread32(RG_SSUSB_SIFSLV_FMMONR1));

	mdelay(1);

	/* wait for FM detection done, set 10ms timeout */
	for (i = 0; i < 10; i++) {
		u4FmOut = u3phyread32(RG_SSUSB_SIFSLV_FMMONR0);
		phy_printk(K_DEBUG, "FM_OUT u4FmOut = %d(0x%08X)\n",
			u4FmOut, u4FmOut);
		if (u4FmOut != 0) {
			fgRet = 0;
			phy_printk(K_DEBUG, "FM detect loop = %d\n", i);
			break;
		}
		fgRet = 1;
		mdelay(1);
	}
	u3phywrite32(RG_SSUSB_SIFSLV_FMCR0, RG_FREQDET_EN_OFST,
		RG_FREQDET_EN, 0);
	u3phywrite32(RG_SSUSB_SIFSLV_FMMONR1, RG_FRCK_EN_OFST,
		RG_FRCK_EN, 0);

	if (u4FmOut == 0) {
		u3phywrite32(U3D_USBPHYACR5, RG_USB20_HSTX_SRCTRL_OFST,
			RG_USB20_HSTX_SRCTRL, 0x4);
		fgRet = 1;
	} else {
		u4Tmp = (1024 * U3D_PHY_REF_CK * U2_SR_COEF);
		u4Tmp = u4Tmp / (u4FmOut * 1000);
		phy_printk(K_DEBUG, "SR cali u1SrCalVal = %d\n", u4Tmp);
		u3phywrite32(U3D_USBPHYACR5, RG_USB20_HSTX_SRCTRL_OFST,
			RG_USB20_HSTX_SRCTRL, u4Tmp);
	}

	u3phywrite32(U3D_USBPHYACR5, RG_USB20_HSTX_SRCAL_EN_OFST,
		RG_USB20_HSTX_SRCAL_EN, 0);

	return fgRet;
}

#ifdef CONFIG_MTK_UART_USB_SWITCH
static bool bFirstUartCheck = true;
static bool phy_check_in_uart_mode(struct mtk_phy_instance *instance);
#endif

static int phy_init_soc(struct mtk_phy_instance *instance)
{
	struct mtk_phy_drv *phy_drv = instance->phy_drv;

	phy_printk(K_DEBUG, "%s\n", __func__);
	usb_enable_clock(phy_drv, true);
	udelay(250);
	u3phywrite32(U3D_USB30_PHYA_REG1, RG_SSUSB_VUSB10_ON_OFST,
		RG_SSUSB_VUSB10_ON, 1);

#ifdef CONFIG_MTK_UART_USB_SWITCH
	if ((bFirstUartCheck && phy_check_in_uart_mode(instance)) ||
		instance->uart_mode) {
		phy_printk(K_ALET, "%s+ already in UART_MODE\n", __func__);
		bFirstUartCheck = false;
		instance->uart_mode = 1;
		goto reg_done;
	} else
		bFirstUartCheck = false;
#endif

#ifdef CONFIG_MTK_USB2JTAG_SUPPORT
	if (usb2jtag_mode()) {
		phy_printk(K_INFO, "%s, bypass in usb2jtag mode\n", __func__);
		return 0;
	}
#endif

	/*switch to USB function. (system register, force ip into usb mode) */
	u3phywrite32(U3D_U2PHYDTM0, FORCE_UART_EN_OFST,
		FORCE_UART_EN, 0);
	u3phywrite32(U3D_U2PHYDTM1, RG_UART_EN_OFST,
		RG_UART_EN, 0);
	u3phywrite32(U3D_U2PHYACR4, RG_USB20_GPIO_CTL_OFST,
		RG_USB20_GPIO_CTL, 0);
	u3phywrite32(U3D_U2PHYACR4, USB20_GPIO_MODE_OFST,
		USB20_GPIO_MODE, 0);
	u3phywrite32(U3D_U2PHYDTM0, RG_UART_MODE_OFST,
		RG_UART_MODE, 0);
	u3phywrite32(U3D_USBPHYACR6, RG_USB20_BC11_SW_EN_OFST,
		RG_USB20_BC11_SW_EN, 0);
	u3phywrite32(U3D_U2PHYACR4, RG_USB20_DP_100K_MODE_OFST,
		RG_USB20_DP_100K_MODE, 1);
	u3phywrite32(U3D_U2PHYACR4, USB20_DP_100K_EN_OFST,
		USB20_DP_100K_EN, 0);
	u3phywrite32(U3D_U2PHYACR4, RG_USB20_DM_100K_EN_OFST,
		RG_USB20_DM_100K_EN, 0);
	u3phywrite32(U3D_USBPHYACR6, RG_USB20_OTG_VBUSCMP_EN_OFST,
		RG_USB20_OTG_VBUSCMP_EN, 0);
	u3phywrite32(U3D_U2PHYDTM0, FORCE_SUSPENDM_OFST,
		FORCE_SUSPENDM, 0);

	udelay(800);

	u3phywrite32(U3D_U2PHYDTM1, FORCE_VBUSVALID_OFST,
		FORCE_VBUSVALID, 1);
	u3phywrite32(U3D_U2PHYDTM1, FORCE_AVALID_OFST,
		FORCE_AVALID, 1);
	u3phywrite32(U3D_U2PHYDTM1, FORCE_SESSEND_OFST,
		FORCE_SESSEND, 1);

#ifdef CONFIG_MTK_UART_USB_SWITCH
reg_done:
#endif
	usb_enable_clock(phy_drv, false);

	return 0;
}


static void phy_savecurrent(struct mtk_phy_instance *instance)
{
	struct mtk_phy_drv *phy_drv = instance->phy_drv;

	phy_printk(K_ALET, "%s\n", __func__);
	if (instance->sib_mode) {
		phy_printk(K_INFO, "%s sib_mode can't savecurrent\n", __func__);
		return;
	}

#ifdef CONFIG_MTK_UART_USB_SWITCH
	if (instance->uart_mode)
		goto reg_done;
#endif

#ifdef CONFIG_MTK_USB2JTAG_SUPPORT
	if (usb2jtag_mode()) {
		phy_printk(K_INFO, "%s, bypass in usb2jtag mode\n", __func__);
		return;
	}
#endif

	u3phywrite32(U3D_U2PHYDTM0, FORCE_UART_EN_OFST,
	FORCE_UART_EN, 0);
	u3phywrite32(U3D_U2PHYDTM1, RG_UART_EN_OFST,
		RG_UART_EN, 0);
	u3phywrite32(U3D_U2PHYACR4, RG_USB20_GPIO_CTL_OFST,
		RG_USB20_GPIO_CTL, 0);
	u3phywrite32(U3D_U2PHYACR4, USB20_GPIO_MODE_OFST,
		USB20_GPIO_MODE, 0);
	u3phywrite32(U3D_USBPHYACR6, RG_USB20_BC11_SW_EN_OFST,
		RG_USB20_BC11_SW_EN, 0);
	/*u3phywrite32(U3D_USBPHYACR6,
	 *RG_USB20_OTG_VBUSCMP_EN_OFST,
	 *RG_USB20_OTG_VBUSCMP_EN, 0);
	 */
	u3phywrite32(U3D_U2PHYDTM0, RG_SUSPENDM_OFST,
	RG_SUSPENDM, 1);
	u3phywrite32(U3D_U2PHYDTM0, FORCE_SUSPENDM_OFST,
		FORCE_SUSPENDM, 1);
	udelay(2000);
	u3phywrite32(U3D_U2PHYDTM0, RG_DPPULLDOWN_OFST,
#ifndef OPLUS_FEATURE_CHG_BASIC
/* LiYue@BSP.CHG.Basic, 2019.12.05, Set internal pull down instead */
		RG_DPPULLDOWN, 1);
#else
		RG_DPPULLDOWN, 0);
#endif
	u3phywrite32(U3D_U2PHYDTM0, RG_DMPULLDOWN_OFST,
#ifndef OPLUS_FEATURE_CHG_BASIC
/* LiYue@BSP.CHG.Basic, 2019.12.05, Set internal pull down instead */
		RG_DMPULLDOWN, 1);
#else
		RG_DMPULLDOWN, 0);
	/* set internal pull down*/
	u3phywrite32(U3D_USBPHYACR6, RG_USB20_PHY_REV_OFST, (0x2 << 24), 0x2);
#endif
	u3phywrite32(U3D_U2PHYDTM0, RG_XCVRSEL_OFST,
		RG_XCVRSEL, 0x1);
	u3phywrite32(U3D_U2PHYDTM0, RG_TERMSEL_OFST,
		RG_TERMSEL, 1);
	u3phywrite32(U3D_U2PHYDTM0, RG_DATAIN_OFST,
		RG_DATAIN, 0);
	u3phywrite32(U3D_U2PHYDTM0, FORCE_DP_PULLDOWN_OFST,
		FORCE_DP_PULLDOWN, 1);
	u3phywrite32(U3D_U2PHYDTM0, FORCE_DM_PULLDOWN_OFST,
		FORCE_DM_PULLDOWN, 1);
	u3phywrite32(U3D_U2PHYDTM0, FORCE_XCVRSEL_OFST,
		FORCE_XCVRSEL, 1);
	u3phywrite32(U3D_U2PHYDTM0, FORCE_TERMSEL_OFST,
		FORCE_TERMSEL, 1);
	u3phywrite32(U3D_U2PHYDTM0, FORCE_DATAIN_OFST,
		FORCE_DATAIN, 1);
	udelay(800);

	u3phywrite32(U3D_U2PHYDTM0, RG_SUSPENDM_OFST,
		RG_SUSPENDM, 0);

	udelay(1);

	u3phywrite32(U3D_U2PHYDTM1, RG_VBUSVALID_OFST,
		RG_VBUSVALID, 0);
	u3phywrite32(U3D_U2PHYDTM1, RG_AVALID_OFST,
		RG_AVALID, 0);
	u3phywrite32(U3D_U2PHYDTM1, RG_SESSEND_OFST,
		RG_SESSEND, 1);

#ifdef CONFIG_MTK_UART_USB_SWITCH
reg_done:
#endif
	u3phywrite32(U3D_USB30_PHYA_REG1, RG_SSUSB_VUSB10_ON_OFST,
		RG_SSUSB_VUSB10_ON, 1);

	udelay(10);
	usb_enable_clock(phy_drv, false);
}

#define VAL_MAX_WIDTH_2	0x3
#define VAL_MAX_WIDTH_3	0x7
extern unsigned int usb_mode;
static void usb_phy_tuning(struct mtk_phy_instance *instance)
{
	s32 u2_vrt_ref, u2_term_ref, u2_enhance;
	s32 host_u2_vrt_ref, host_u2_term_ref, host_u2_enhance;
	struct device_node *of_node;

	if (!instance->phy_tuning.inited) {
		instance->phy_tuning.u2_vrt_ref = 6;
		instance->phy_tuning.u2_term_ref = 6;
		instance->phy_tuning.u2_enhance = 1;
		instance->phy_tuning.host_u2_vrt_ref = 6;
		instance->phy_tuning.host_u2_term_ref = 6;
		instance->phy_tuning.host_u2_enhance = 1;
		of_node = of_find_compatible_node(NULL, NULL,
			instance->phycfg->tuning_node_name);
		if (of_node) {
			/* value won't be updated if property not being found */
			of_property_read_u32(of_node, "u2_vrt_ref",
				(u32 *) &instance->phy_tuning.u2_vrt_ref);
			of_property_read_u32(of_node, "u2_term_ref",
				(u32 *) &instance->phy_tuning.u2_term_ref);
			of_property_read_u32(of_node, "u2_enhance",
				(u32 *) &instance->phy_tuning.u2_enhance);
				of_property_read_u32(of_node, "host_u2_vrt_ref",
					(u32 *) &instance->phy_tuning.host_u2_vrt_ref);
				of_property_read_u32(of_node, "host_u2_term_ref",
					(u32 *) &instance->phy_tuning.host_u2_term_ref);
				of_property_read_u32(of_node, "host_u2_enhance",
					(u32 *) &instance->phy_tuning.host_u2_enhance);
		}
		instance->phy_tuning.inited = true;
		}
	if (usb_mode == 0){          //host
		u3phywrite32(U3D_USBPHYACR6, RG_USB20_DISCTH_OFST,RG_USB20_DISCTH, 0xD);
		u3phywrite32(U3D_USBPHYACR1, RG_USB20_INTR_CAL_OFST,RG_USB20_INTR_CAL, 0X1E);
		u2_vrt_ref = instance->phy_tuning.host_u2_vrt_ref;
		u2_term_ref = instance->phy_tuning.host_u2_term_ref;
		u2_enhance = instance->phy_tuning.host_u2_enhance;
	}
	else{                        //device
		u2_vrt_ref = instance->phy_tuning.u2_vrt_ref;
		u2_term_ref = instance->phy_tuning.u2_term_ref;
		u2_enhance = instance->phy_tuning.u2_enhance;
	}
	if (u2_vrt_ref != -1) {
		if (u2_vrt_ref <= VAL_MAX_WIDTH_3) {
			u3phywrite32(U3D_USBPHYACR1,
				RG_USB20_VRT_VREF_SEL_OFST,
				RG_USB20_VRT_VREF_SEL, u2_vrt_ref);
		}
	}
	if (u2_term_ref != -1) {
		if (u2_term_ref <= VAL_MAX_WIDTH_3) {
			u3phywrite32(U3D_USBPHYACR1,
				RG_USB20_TERM_VREF_SEL_OFST,
				RG_USB20_TERM_VREF_SEL, u2_term_ref);
		}
	}
	if (u2_enhance != -1) {
		if (u2_enhance <= VAL_MAX_WIDTH_2) {
			u3phywrite32(U3D_USBPHYACR6,
				RG_USB20_PHY_REV_6_OFST,
				RG_USB20_PHY_REV_6, u2_enhance);
		}
	}

	phy_printk(K_INFO, "%s - SSUSB TX EYE Tuning\n", __func__);
	u3phywrite32(U3D_PHYD_MIX6, RG_SSUSB_IDRVSEL_OFST,
		RG_SSUSB_IDRVSEL, 0x19);
	u3phywrite32(U3D_PHYD_MIX6, RG_SSUSB_FORCE_IDRVSEL_OFST,
		RG_SSUSB_FORCE_IDRVSEL, 1);

	u3phywrite32(U3D_PHYD_MIX6, RG_SSUSB_IDEMSEL_OFST,
		RG_SSUSB_IDEMSEL, 0x1a);
	u3phywrite32(U3D_PHYD_MIX6, RG_SSUSB_FORCE_IDEMSEL_OFST,
		RG_SSUSB_FORCE_IDEMSEL, 1);
}


static void phy_recover(struct mtk_phy_instance *instance)
{
	struct mtk_phy_drv *phy_drv = instance->phy_drv;

	phy_printk(K_INFO, "%s+\n", __func__);
	usb_enable_clock(phy_drv, true);
	udelay(250);
	u3phywrite32(U3D_USB30_PHYA_REG1, RG_SSUSB_VUSB10_ON_OFST,
		RG_SSUSB_VUSB10_ON, 1);

#ifdef CONFIG_MTK_UART_USB_SWITCH
	if (instance->uart_mode)
		return;
#endif

#ifdef CONFIG_MTK_USB2JTAG_SUPPORT
	if (usb2jtag_mode()) {
		phy_printk(K_INFO, "%s, bypass in usb2jtag mode\n", __func__);
		return;
	}
#endif

	u3phywrite32(U3D_U2PHYDTM0, FORCE_UART_EN_OFST,
	FORCE_UART_EN, 0);
	u3phywrite32(U3D_U2PHYDTM1, RG_UART_EN_OFST,
		RG_UART_EN, 0);
	u3phywrite32(U3D_U2PHYACR4, RG_USB20_GPIO_CTL_OFST,
		RG_USB20_GPIO_CTL, 0);
	u3phywrite32(U3D_U2PHYACR4, USB20_GPIO_MODE_OFST,
		USB20_GPIO_MODE, 0);

	u3phywrite32(U3D_U2PHYDTM0, FORCE_SUSPENDM_OFST,
		FORCE_SUSPENDM, 0);
	u3phywrite32(U3D_U2PHYDTM0, RG_DPPULLDOWN_OFST,
		RG_DPPULLDOWN, 0);
	u3phywrite32(U3D_U2PHYDTM0, RG_DMPULLDOWN_OFST,
		RG_DMPULLDOWN, 0);
#ifdef OPLUS_FEATURE_CHG_BASIC
/* LiYue@BSP.CHG.Basic, 2019.12.05, Set internal pull down instead */
	/* clean internal pull down*/
	u3phywrite32(U3D_USBPHYACR6, RG_USB20_PHY_REV_OFST, (0x2 << 24), 0x0);
#endif
	u3phywrite32(U3D_U2PHYDTM0, RG_XCVRSEL_OFST,
		RG_XCVRSEL, 0);
	u3phywrite32(U3D_U2PHYDTM0, RG_TERMSEL_OFST,
		RG_TERMSEL, 0);
	u3phywrite32(U3D_U2PHYDTM0, RG_DATAIN_OFST,
		RG_DATAIN, 0);
	u3phywrite32(U3D_U2PHYDTM0, FORCE_DP_PULLDOWN_OFST,
		FORCE_DP_PULLDOWN, 0);
	u3phywrite32(U3D_U2PHYDTM0, FORCE_DM_PULLDOWN_OFST,
		FORCE_DM_PULLDOWN, 0);
	u3phywrite32(U3D_U2PHYDTM0, FORCE_XCVRSEL_OFST,
		FORCE_XCVRSEL, 0);
	u3phywrite32(U3D_U2PHYDTM0, FORCE_TERMSEL_OFST,
		FORCE_TERMSEL, 0);
	u3phywrite32(U3D_U2PHYDTM0, FORCE_DATAIN_OFST,
		FORCE_DATAIN, 0);
	u3phywrite32(U3D_USBPHYACR6, RG_USB20_BC11_SW_EN_OFST,
		RG_USB20_BC11_SW_EN, 0);
	/*u3phywrite32(U3D_USBPHYACR6, RG_USB20_OTG_VBUSCMP_EN_OFST,
	 * RG_USB20_OTG_VBUSCMP_EN, 1);
	 */
	/* Wait 800 usec */
	udelay(800);

	u3phywrite32(U3D_U2PHYDTM1, RG_VBUSVALID_OFST,
		RG_VBUSVALID, 1);
	u3phywrite32(U3D_U2PHYDTM1, RG_AVALID_OFST,
		RG_AVALID, 1);
	u3phywrite32(U3D_U2PHYDTM1, RG_SESSEND_OFST,
		RG_SESSEND, 0);

	phy_efuse_settings(instance);

/*#Dongru.Zhao@BSP.CHG.Basic, 2020/08/10, zdr Add for USB phy_tuning .*/
	u3phywrite32(U3D_USBPHYACR6, RG_USB20_DISCTH_OFST,
		RG_USB20_DISCTH, 0xD);
/*ELSE*/
/*
	u3phywrite32(U3D_USBPHYACR6, RG_USB20_DISCTH_OFST,
		RG_USB20_DISCTH, 0x7);
*/
/*END*/

	usb_phy_tuning(instance);
	phy_advance_settings(instance);

	phy_slew_rate_calibration(instance);

	phy_printk(K_INFO, "%s-\n", __func__);
}


static int charger_detect_init(struct mtk_phy_instance *instance)
{
	struct mtk_phy_drv *phy_drv = instance->phy_drv;


	phy_printk(K_INFO, "%s+\n", __func__);

	usb_enable_clock(phy_drv, true);
	udelay(250);
	u3phywrite32(U3D_USBPHYACR6, RG_USB20_BC11_SW_EN_OFST,
		RG_USB20_BC11_SW_EN, 1);
	udelay(1);
	usb_enable_clock(phy_drv, false);

	phy_printk(K_INFO, "%s-\n", __func__);
	return 0;
}

static int charger_detect_release(struct mtk_phy_instance *instance)
{
	struct mtk_phy_drv *phy_drv = instance->phy_drv;

	phy_printk(K_INFO, "%s+\n", __func__);

	usb_enable_clock(phy_drv, true);
	udelay(250);
	u3phywrite32(U3D_USBPHYACR6, RG_USB20_BC11_SW_EN_OFST,
		RG_USB20_BC11_SW_EN, 0);
	udelay(1);
	usb_enable_clock(phy_drv, false);

	phy_printk(K_INFO, "%s-\n", __func__);
	return 0;
}

static void phy_charger_switch_bc11(struct mtk_phy_instance *instance,
					bool on)
{
	if (on)
		charger_detect_init(instance);
	else
		charger_detect_release(instance);
}

static void phy_dpdm_pulldown(struct mtk_phy_instance *instance,
					bool enable)
{
	struct mtk_phy_drv *phy_drv = instance->phy_drv;

	phy_printk(K_INFO, "%s+\n", __func__);

	usb_enable_clock(phy_drv, true);
	udelay(250);
	if (enable) {
		u3phywrite32(U3D_U2PHYDTM0, RG_DPPULLDOWN_OFST,
			RG_DPPULLDOWN, 1);
		u3phywrite32(U3D_U2PHYDTM0, RG_DMPULLDOWN_OFST,
			RG_DMPULLDOWN, 1);

		u3phywrite32(U3D_USBPHYACR6,
			RG_USB20_PHY_REV_OFST, (0x2<<24), 0x0);
	} else {
		u3phywrite32(U3D_U2PHYDTM0, RG_DPPULLDOWN_OFST,
			RG_DPPULLDOWN, 0);
		u3phywrite32(U3D_U2PHYDTM0, RG_DMPULLDOWN_OFST,
			RG_DMPULLDOWN, 0);

		/*For water detection function,
		 *need to set DPPULLDOWN and DMPULLDOWN 0
		 *Also adjust RG_USB20_PHY_REV to prevent power leakage
		 */
		u3phywrite32(U3D_USBPHYACR6,
			RG_USB20_PHY_REV_OFST, (0x2<<24), 0x2);
	}
	udelay(1);
	usb_enable_clock(phy_drv, false);

	phy_printk(K_INFO, "%s-\n", __func__);
}

static int phy_lpm_enable(struct mtk_phy_instance  *instance, bool on)
{
	phy_printk(K_DEBUG, "%s+ = %d\n", __func__, on);

	if (on)
		u3phywrite32(U3D_U2PHYDCR1, RG_USB20_SW_PLLMODE_OFST,
			RG_USB20_SW_PLLMODE, 0x1);
	else
		u3phywrite32(U3D_U2PHYDCR1, RG_USB20_SW_PLLMODE_OFST,
			RG_USB20_SW_PLLMODE, 0x0);

	return 0;
}

static int phy_host_mode(struct mtk_phy_instance  *instance, bool on)
{
	phy_printk(K_DEBUG, "%s+ = %d\n", __func__, on);

	return 0;
}

static int phy_ioread(struct mtk_phy_instance  *instance, u32 reg)
{
	if (reg < instance->port_rgsz)
		return readl(instance->sif_u2phy_com + reg);
	else
		return 0;
}

static int phy_iowrite(struct mtk_phy_instance  *instance,
	u32 val, u32 reg)
{
	if (reg < instance->port_rgsz)
		writel(val, instance->sif_u2phy_com + reg);

	return 0;
}


static bool phy_u3_loop_back_test(struct mtk_phy_instance *instance)
{
	int reg;
	bool loop_back_ret = false;
	struct mtk_phy_drv *phy_drv = instance->phy_drv;
	int r_pipe0, r_rx0, rx_mix0, r_t2rlb;

	/* VA10 is shared by U3/UFS */
	/* default on and set voltage by PMIC */
	/* off/on in SPM suspend/resume */

	usb_enable_clock(phy_drv, true);

	r_pipe0 = readl(U3D_PHYD_PIPE0);
	r_rx0 = readl(U3D_PHYD_RX0);
	rx_mix0 = readl(U3D_PHYD_MIX0);
	r_t2rlb = readl(U3D_PHYD_T2RLB);

	writel((readl(U3D_PHYD_PIPE0) & ~(0x01<<30)) | 0x01<<30,
							U3D_PHYD_PIPE0);
	writel((readl(U3D_PHYD_PIPE0) & ~(0x01<<28)) | 0x00<<28,
							U3D_PHYD_PIPE0);
	writel((readl(U3D_PHYD_PIPE0) & ~(0x03<<26)) | 0x01<<26,
							U3D_PHYD_PIPE0);
	writel((readl(U3D_PHYD_PIPE0) & ~(0x03<<24)) | 0x00<<24,
							U3D_PHYD_PIPE0);
	writel((readl(U3D_PHYD_PIPE0) & ~(0x01<<22)) | 0x00<<22,
							U3D_PHYD_PIPE0);
	writel((readl(U3D_PHYD_PIPE0) & ~(0x01<<21)) | 0x00<<21,
							U3D_PHYD_PIPE0);
	writel((readl(U3D_PHYD_PIPE0) & ~(0x01<<20)) | 0x01<<20,
							U3D_PHYD_PIPE0);
	mdelay(10);

	/*T2R loop back disable*/
	writel((readl(U3D_PHYD_RX0)&~(0x01<<15)) | 0x00<<15,
							U3D_PHYD_RX0);
	mdelay(10);

	/* TSEQ lock detect threshold */
	writel((readl(U3D_PHYD_MIX0) & ~(0x07<<24)) | 0x07<<24,
							U3D_PHYD_MIX0);
	/* set default TSEQ polarity check value = 1 */
	writel((readl(U3D_PHYD_MIX0) & ~(0x01<<28)) | 0x01<<28,
							U3D_PHYD_MIX0);
	/* TSEQ polarity check enable */
	writel((readl(U3D_PHYD_MIX0) & ~(0x01<<29)) | 0x01<<29,
							U3D_PHYD_MIX0);
	/* TSEQ decoder enable */
	writel((readl(U3D_PHYD_MIX0) & ~(0x01<<30)) | 0x01<<30,
							U3D_PHYD_MIX0);
	mdelay(10);

	/* set T2R loop back TSEQ length (x 16us) */
	writel((readl(U3D_PHYD_T2RLB) & ~(0xff<<0)) | 0xF0<<0,
							U3D_PHYD_T2RLB);
	/* set T2R loop back BDAT reset period (x 16us) */
	writel((readl(U3D_PHYD_T2RLB) & ~(0x0f<<12)) | 0x0F<<12,
							U3D_PHYD_T2RLB);
	/* T2R loop back pattern select */
	writel((readl(U3D_PHYD_T2RLB) & ~(0x03<<8)) | 0x00<<8,
							U3D_PHYD_T2RLB);
	mdelay(10);

	/* T2R loop back serial mode */
	writel((readl(U3D_PHYD_RX0) & ~(0x01<<13)) | 0x01<<13,
							U3D_PHYD_RX0);
	/* T2R loop back parallel mode = 0 */
	writel((readl(U3D_PHYD_RX0) & ~(0x01<<12)) | 0x00<<12,
							U3D_PHYD_RX0);
	/* T2R loop back mode enable */
	writel((readl(U3D_PHYD_RX0) & ~(0x01<<11)) | 0x01<<11,
							U3D_PHYD_RX0);
	/* T2R loop back enable */
	writel((readl(U3D_PHYD_RX0) & ~(0x01<<15)) | 0x01<<15,
							U3D_PHYD_RX0);
	mdelay(100);

	reg = u3phyread32(SSUSB_SIFSLV_U3PHYD_BASE + 0xb4);
	phy_printk(K_INFO, "rb back             : 0x%x\n", reg);
	phy_printk(K_INFO, "rb t2rlb_lock  : %d\n", (reg >> 2) & 0x01);
	phy_printk(K_INFO, "rb t2rlb_pass  : %d\n", (reg >> 3) & 0x01);
	phy_printk(K_INFO, "rb t2rlb_passth: %d\n", (reg >> 4) & 0x01);

	if ((reg & 0x0E) == 0x0E)
		loop_back_ret = true;
	else
		loop_back_ret = false;

	writel(r_rx0, U3D_PHYD_RX0);
	writel(r_pipe0, U3D_PHYD_PIPE0);
	writel(rx_mix0, U3D_PHYD_MIX0);
	writel(r_t2rlb, U3D_PHYD_T2RLB);

	usb_enable_clock(phy_drv, false);
	return loop_back_ret;
}


#ifdef CONFIG_MTK_SIB_USB_SWITCH
static void phy_sib_enable(struct mtk_phy_instance *instance, bool enable)
{
	struct mtk_phy_drv *phy_drv = instance->phy_drv;

	phy_printk(K_DEBUG, "usb_phy_sib_enable_switch =%d\n", enable);

	usb_enable_clock(phy_drv, true);
	udelay(250);

	u3phywrite32(U3D_USB30_PHYA_REG1, RG_SSUSB_VUSB10_ON_OFST,
		RG_SSUSB_VUSB10_ON, 1);

	/* SSUSB_SIFSLV_IPPC_BASE SSUSB_IP_SW_RST = 0 */
	writel(0x00031000, (void __iomem *)phy_drv->ippc_base + 0x0);
	/* SSUSB_IP_HOST_PDN = 0 */
	writel(0x00000000, (void __iomem *)phy_drv->ippc_base + 0x4);
	/* SSUSB_IP_DEV_PDN = 0 */
	writel(0x00000000, (void __iomem *)phy_drv->ippc_base + 0x8);
	/* SSUSB_IP_PCIE_PDN = 0 */
	writel(0x00000000, (void __iomem *)phy_drv->ippc_base + 0xC);
	/* SSUSB_U3_PORT_DIS/SSUSB_U3_PORT_PDN = 0*/
	writel(0x0000000C, (void __iomem *)phy_drv->ippc_base + 0x30);

	/*
	 * USBMAC mode is 0x62910002 (bit 1)
	 * MDSIB  mode is 0x62910008 (bit 3)
	 * 0x0629 just likes a signature. Can't be removed.
	 */
	if (enable) {
		writel(0x62910008, MTK_USB_PHY_CHIP_BASE);
		instance->sib_mode = true;
	} else {
		writel(0x62910002, MTK_USB_PHY_CHIP_BASE);
		instance->sib_mode = false;
	}
}

static bool phy_sib_switch_status(struct mtk_phy_instance *instance)
{
	struct mtk_phy_drv *phy_drv = instance->phy_drv;
	int reg;
	bool ret;

	usb_enable_clock(phy_drv, true);
	udelay(250);

	u3phywrite32(U3D_USB30_PHYA_REG1, RG_SSUSB_VUSB10_ON_OFST,
		RG_SSUSB_VUSB10_ON, 1);

	reg = u3phyread32(MTK_USB_PHY_CHIP_BASE);
	phy_printk(K_DEBUG, "%s reg=%d\n", __func__, reg);

	if (reg == 0x62910008)
		ret = true;
	else
		ret = false;

	return ret;
}

#endif

#ifdef CONFIG_MTK_UART_USB_SWITCH
#include <linux/phy/mediatek/mtk_usb_phy.h>

static void phy_dump_usb2uart_reg(struct mtk_phy_instance *instance)
{
	struct mtk_phy_drv *phy_drv = instance->phy_drv;

	usb_enable_clock(phy_drv, true);
	udelay(250);

	phy_printk(K_ALET, "addr: 0x18, value: 0x%x\n",
		u3phyread32(U3D_USBPHYACR6));
	phy_printk(K_ALET, "addr: 0x20, value: 0x%x\n",
		u3phyread32(U3D_U2PHYACR4));
	phy_printk(K_ALET, "addr: 0x68, value: 0x%x\n",
		u3phyread32(U3D_U2PHYDTM0));
	phy_printk(K_ALET, "addr: 0x6C, value: 0x%x\n",
		u3phyread32(U3D_U2PHYDTM1));

	usb_enable_clock(phy_drv, false);
}

bool phy_check_in_uart_mode(struct mtk_phy_instance *instance)
{
	struct mtk_phy_drv *phy_drv = instance->phy_drv;
	int usb_port_mode;

	usb_enable_clock(phy_drv, true);
	udelay(250);

	usb_port_mode = u3phyread32(U3D_U2PHYDTM0) >> RG_UART_MODE_OFST;

	usb_enable_clock(phy_drv, false);
	phy_printk(K_ALET, "%s - usb_port_mode = %d, ",
			__func__, usb_port_mode);
	phy_printk(K_ALET, "%s - instance->uart_mode = %d\n",
			__func__, instance->uart_mode);

	if (usb_port_mode == 0x1)
		return true;
	else
		return false;
}

static int phy_switch_usb2uart_gpio(enum PORT_MODE portmode)
{
	struct device_node *node;
	void __iomem *gpio_base;

	/* SET USB to UART GPIO to UART0 */
	node = of_find_compatible_node(NULL, NULL, "mediatek,gpio");
	if (!node) {
		pr_info("error: can't find GPIO node\n");
		return -EINVAL;
	}

	gpio_base = of_iomap(node, 0);
	if (!gpio_base) {
		pr_info("error: iomap fail for GPIO\n");
		return -EINVAL;
	}

	if (portmode == PORT_MODE_UART)
		writel((readl(gpio_base + RG_GPIO_SELECT) |
			(GPIO_SEL_UART0<<GPIO_SEL_OFFSET)),
			gpio_base + RG_GPIO_SELECT);
	else
		writel((readl(gpio_base + RG_GPIO_SELECT) &
			~(GPIO_SEL_MASK<<GPIO_SEL_OFFSET)),
			gpio_base + RG_GPIO_SELECT);

	return 0;
}

static void phy_switch_to_uart(struct mtk_phy_instance *instance)
{
	struct mtk_phy_drv *phy_drv = instance->phy_drv;

	if (phy_check_in_uart_mode(instance)) {
		phy_printk(K_DEBUG, "%s+ UART_MODE\n", __func__);
		return;
	}

	phy_printk(K_DEBUG, "%s+ USB_MODE\n", __func__);

	usb_enable_clock(phy_drv, true);
	udelay(250);

	u3phywrite32(U3D_USBPHYACR6, RG_USB20_BC11_SW_EN_OFST,
		RG_USB20_BC11_SW_EN, 0);
	u3phywrite32(U3D_U2PHYDTM0, RG_SUSPENDM_OFST,
		RG_SUSPENDM, 1);
	u3phywrite32(U3D_U2PHYDTM0, FORCE_SUSPENDM_OFST,
		FORCE_SUSPENDM, 1);
	u3phywrite32(U3D_U2PHYDTM0, RG_UART_MODE_OFST,
		RG_UART_MODE, 1);
	u3phywrite32(U3D_U2PHYDTM1, RG_UART_EN_OFST,
		RG_UART_EN, 1);
	u3phywrite32(U3D_U2PHYDTM0, FORCE_UART_EN_OFST,
		FORCE_UART_EN, 1);
	u3phywrite32(U3D_U2PHYDTM0, FORCE_UART_TX_OE_OFST,
		FORCE_UART_TX_OE, 1);
	u3phywrite32(U3D_U2PHYDTM0, FORCE_UART_BIAS_EN_OFST,
		FORCE_UART_BIAS_EN, 1);
	u3phywrite32(U3D_U2PHYDTM1, RG_UART_EN_OFST,
		RG_UART_EN, 1);
	u3phywrite32(U3D_U2PHYDTM1, RG_UART_TX_OE_OFST,
		RG_UART_TX_OE, 1);
	u3phywrite32(U3D_U2PHYDTM1, RG_UART_BIAS_EN_OFST,
		RG_UART_BIAS_EN, 1);
	u3phywrite32(U3D_U2PHYACR4, RG_USB20_DM_100K_EN_OFST,
		RG_USB20_DM_100K_EN, 1);
	u3phywrite32(U3D_U2PHYDTM0, RG_DPPULLDOWN_OFST,
		RG_DPPULLDOWN, 0);
	u3phywrite32(U3D_U2PHYDTM0, RG_DMPULLDOWN_OFST,
		RG_DMPULLDOWN, 0);

	usb_enable_clock(phy_drv, false);

	phy_switch_usb2uart_gpio(PORT_MODE_UART);

	instance->uart_mode = true;
}


static void phy_switch_to_usb(struct mtk_phy_instance *instance)
{
	instance->uart_mode = false;

	u3phywrite32(U3D_U2PHYDTM0, FORCE_UART_EN_OFST,
		FORCE_UART_EN, 0);

	phy_switch_usb2uart_gpio(PORT_MODE_USB);

	phy_init_soc(instance);
}
#endif

#ifdef CONFIG_MTK_USB2JTAG_SUPPORT
int usb2jtag_usb_init(void)
{
	struct device_node *node = NULL;
	void __iomem *usb3_sif2_base;
	u32 temp;

	pr_notice("[USB2JTAG] %s ++\n", __func__);

	node = of_find_compatible_node(NULL, NULL, "mediatek,usb3");
	if (!node) {
		pr_notice("[USB2JTAG] map node @ mediatek,usb3 failed\n");
		return -1;
	}

	usb3_sif2_base = of_iomap(node, 2);
	if (!usb3_sif2_base) {
		pr_notice("[USB2JTAG] iomap usb3_sif2_base failed\n");
		return -1;
	}

	/* rg_usb20_gpio_ctl: bit[9] = 1 */
	temp = readl(usb3_sif2_base + 0x320);
	writel(temp | (1 << 9), usb3_sif2_base + 0x320);

	/* RG_USB20_BC11_SW_EN: bit[23] = 0 */
	temp = readl(usb3_sif2_base + 0x318);
	writel(temp & ~(1 << 23), usb3_sif2_base + 0x318);

	/* RG_USB20_BGR_EN: bit[0] = 1 */
	temp = readl(usb3_sif2_base + 0x300);
	writel(temp | (1 << 0), usb3_sif2_base + 0x300);

	/* rg_sifslv_mac_bandgap_en: bit[17] = 0 */
	temp = readl(usb3_sif2_base + 0x308);
	writel(temp & ~(1 << 17), usb3_sif2_base + 0x308);

	/* wait stable */
	mdelay(1);

	iounmap(usb3_sif2_base);

	return 0;
}
#endif

static int mtk_phy_drv_init(struct platform_device *pdev,
	struct mtk_phy_drv *mtkphy)
{
	int ret = 0;
	struct device *dev = &pdev->dev;
	struct resource *res;

	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sif_base");
	if (!res)
		return -EINVAL;

	mtkphy->phy_base = devm_ioremap(dev, res->start, resource_size(res));
	if (IS_ERR(mtkphy->phy_base)) {
		dev_info(dev, "failed to remap phy regs\n");
		return PTR_ERR(mtkphy->phy_base);
	}

	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ippc");
	if (!res)
		return -EINVAL;

	mtkphy->ippc_base = devm_ioremap(dev, res->start, resource_size(res));
	if (IS_ERR(mtkphy->ippc_base)) {
		dev_info(dev, "failed to remap ippc_base regs\n");
		return PTR_ERR(mtkphy->ippc_base);
	}

	mtkphy->clk = devm_clk_get(dev, "ref_clk");
	if (IS_ERR(mtkphy->clk)) {
		if (PTR_ERR(mtkphy->clk) == -EPROBE_DEFER) {
			dev_info(dev, "mtkphy->clk EPROBE_DEFER\n");
			return -EPROBE_DEFER;
		}
		mtkphy->clk = NULL;
	}

	return ret;
}

static int mtk_phy_drv_exit(struct platform_device *pdev,
	struct mtk_phy_drv *mtkphy)
{
	if (!IS_ERR_OR_NULL(mtkphy->clk))
		clk_disable_unprepare(mtkphy->clk);
	return 0;
}

static int phy_inst_init(struct mtk_phy_instance *instance)
{
	struct mtk_phy_drv *phy_drv = instance->phy_drv;
	void __iomem *port_base;

	phy_printk(K_DEBUG, "%s+\n", __func__);

	port_base = instance->port_base;

	if (phy_drv->phycfg->version == MT_PHY_V1) {
		instance->sif_misc = NULL;
		instance->sif_fmreg = phy_drv->phy_base + 0x100;
		instance->sif_u2phy_com = port_base;
		if (instance->phycfg->port_type == PHY_TYPE_USB3) {
			instance->sif_spllc = phy_drv->phy_base;
			instance->sif_chip = NULL;
			instance->sif_u3phyd = port_base + 0x100;
			instance->sif_u3phyd_bank2 = port_base + 0x200;
			instance->sif_u3phya = port_base + 0x300;
			instance->sif_u3phya_da = port_base + 0x400;
		}
		instance->port_rgsz = 0x800;
	} else if (phy_drv->phycfg->version == MT_PHY_V2) {
		instance->sif_misc = port_base;
		instance->sif_fmreg = port_base + 0x100;
		instance->sif_u2phy_com = port_base + 0x300;
		instance->port_rgsz = 0x500;
		if (instance->phycfg->port_type == PHY_TYPE_USB3) {
			instance->sif_spllc = port_base + 0x700;
			instance->sif_chip = port_base + 0x800;
			instance->sif_u3phyd = port_base + 0x900;
			instance->sif_u3phyd_bank2 = port_base + 0xa00;
			instance->sif_u3phya = port_base + 0xb00;
			instance->sif_u3phya_da = port_base + 0xc00;
			instance->port_rgsz = 0x1000;
		}
	}
	return 0;
}


static const struct mtk_phy_interface ssusb_phys[] = {
{
	.name		= "port0",
	.tuning_node_name = "mediatek,phy_tuning",
	.port_num	= 0,
	.reg_offset = 0,
	.port_type = PHY_TYPE_USB3,
	.usb_phy_inst_init = phy_inst_init,
	.usb_phy_init = phy_init_soc,
	.usb_phy_savecurrent = phy_savecurrent,
	.usb_phy_recover  = phy_recover,
	.usb_phy_switch_to_bc11 = phy_charger_switch_bc11,
	.usb_phy_dpdm_pulldown = phy_dpdm_pulldown,
	.usb_phy_lpm_enable = phy_lpm_enable,
	.usb_phy_host_mode = phy_host_mode,
	.usb_phy_io_read = phy_ioread,
	.usb_phy_io_write = phy_iowrite,
#ifdef CONFIG_MTK_UART_USB_SWITCH
	.usb_phy_switch_to_usb = phy_switch_to_usb,
	.usb_phy_switch_to_uart = phy_switch_to_uart,
	.usb_phy_check_in_uart_mode = phy_check_in_uart_mode,
	.usb_phy_dump_usb2uart_reg  = phy_dump_usb2uart_reg,
#endif
#ifdef CONFIG_MTK_SIB_USB_SWITCH
	.usb_phy_sib_enable_switch = phy_sib_enable,
	.usb_phy_sib_switch_status = phy_sib_switch_status,
#endif
	.usb_phy_u3_loop_back_test = phy_u3_loop_back_test,
	},
};

static const struct mtk_usbphy_config ssusb_phy_config = {
	.phys			= ssusb_phys,
	.num_phys		= 1,
	.version		= MT_PHY_V2,
	.usb_drv_init = mtk_phy_drv_init,
	.usb_drv_exit = mtk_phy_drv_exit,
};

const struct of_device_id mtk_phy_of_match[] = {
	{
		.compatible = "mediatek,mt6885-phy",
		.data = &ssusb_phy_config,
	},
	{ },
};