ASoC: Specify target bias state directly as a bias state
Rather than a simple flag to say if we want the DAPM context to be at full
power specify the target bias state. This should have no current effect
but is a bit more direct and so makes it easier to change our decisions
about the which bias state to go into in future.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
index c46e7d8..7415878 100644
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -510,7 +510,7 @@
struct snd_soc_card *card; /* parent card */
/* used during DAPM updates */
- int dev_power;
+ enum snd_soc_bias_level target_bias_level;
struct list_head list;
#ifdef CONFIG_DEBUG_FS
diff --git a/include/sound/soc.h b/include/sound/soc.h
index f1de3e0..0f29700 100644
--- a/include/sound/soc.h
+++ b/include/sound/soc.h
@@ -214,10 +214,10 @@
* @OFF: Power Off. No restrictions on transition times.
*/
enum snd_soc_bias_level {
- SND_SOC_BIAS_OFF,
- SND_SOC_BIAS_STANDBY,
- SND_SOC_BIAS_PREPARE,
- SND_SOC_BIAS_ON,
+ SND_SOC_BIAS_OFF = 0,
+ SND_SOC_BIAS_STANDBY = 1,
+ SND_SOC_BIAS_PREPARE = 2,
+ SND_SOC_BIAS_ON = 3,
};
struct snd_jack;
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 776e6f4..0bbded4 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -1042,16 +1042,17 @@
struct snd_soc_dapm_context *d = data;
int ret;
- if (d->dev_power && d->bias_level == SND_SOC_BIAS_OFF) {
+ /* If we're off and we're not supposed to be go into STANDBY */
+ if (d->bias_level == SND_SOC_BIAS_OFF &&
+ d->target_bias_level != SND_SOC_BIAS_OFF) {
ret = snd_soc_dapm_set_bias_level(d, SND_SOC_BIAS_STANDBY);
if (ret != 0)
dev_err(d->dev,
"Failed to turn on bias: %d\n", ret);
}
- /* If we're changing to all on or all off then prepare */
- if ((d->dev_power && d->bias_level == SND_SOC_BIAS_STANDBY) ||
- (!d->dev_power && d->bias_level == SND_SOC_BIAS_ON)) {
+ /* Prepare for a STADDBY->ON or ON->STANDBY transition */
+ if (d->bias_level != d->target_bias_level) {
ret = snd_soc_dapm_set_bias_level(d, SND_SOC_BIAS_PREPARE);
if (ret != 0)
dev_err(d->dev,
@@ -1068,7 +1069,9 @@
int ret;
/* If we just powered the last thing off drop to standby bias */
- if (d->bias_level == SND_SOC_BIAS_PREPARE && !d->dev_power) {
+ if (d->bias_level == SND_SOC_BIAS_PREPARE &&
+ (d->target_bias_level == SND_SOC_BIAS_STANDBY ||
+ d->target_bias_level == SND_SOC_BIAS_OFF)) {
ret = snd_soc_dapm_set_bias_level(d, SND_SOC_BIAS_STANDBY);
if (ret != 0)
dev_err(d->dev, "Failed to apply standby bias: %d\n",
@@ -1076,14 +1079,16 @@
}
/* If we're in standby and can support bias off then do that */
- if (d->bias_level == SND_SOC_BIAS_STANDBY && d->idle_bias_off) {
+ if (d->bias_level == SND_SOC_BIAS_STANDBY &&
+ d->target_bias_level == SND_SOC_BIAS_OFF) {
ret = snd_soc_dapm_set_bias_level(d, SND_SOC_BIAS_OFF);
if (ret != 0)
dev_err(d->dev, "Failed to turn off bias: %d\n", ret);
}
/* If we just powered up then move to active bias */
- if (d->bias_level == SND_SOC_BIAS_PREPARE && d->dev_power) {
+ if (d->bias_level == SND_SOC_BIAS_PREPARE &&
+ d->target_bias_level == SND_SOC_BIAS_ON) {
ret = snd_soc_dapm_set_bias_level(d, SND_SOC_BIAS_ON);
if (ret != 0)
dev_err(d->dev, "Failed to apply active bias: %d\n",
@@ -1108,13 +1113,19 @@
LIST_HEAD(up_list);
LIST_HEAD(down_list);
LIST_HEAD(async_domain);
+ enum snd_soc_bias_level bias;
int power;
trace_snd_soc_dapm_start(card);
- list_for_each_entry(d, &card->dapm_list, list)
- if (d->n_widgets || d->codec == NULL)
- d->dev_power = 0;
+ list_for_each_entry(d, &card->dapm_list, list) {
+ if (d->n_widgets || d->codec == NULL) {
+ if (d->idle_bias_off)
+ d->target_bias_level = SND_SOC_BIAS_OFF;
+ else
+ d->target_bias_level = SND_SOC_BIAS_STANDBY;
+ }
+ }
/* Check which widgets we need to power and store them in
* lists indicating if they should be powered up or down.
@@ -1137,7 +1148,7 @@
else
power = 1;
if (power)
- w->dapm->dev_power = 1;
+ w->dapm->target_bias_level = SND_SOC_BIAS_ON;
if (w->power == power)
continue;
@@ -1161,24 +1172,19 @@
switch (event) {
case SND_SOC_DAPM_STREAM_START:
case SND_SOC_DAPM_STREAM_RESUME:
- dapm->dev_power = 1;
+ dapm->target_bias_level = SND_SOC_BIAS_ON;
break;
case SND_SOC_DAPM_STREAM_STOP:
- dapm->dev_power = !!dapm->codec->active;
+ if (dapm->codec->active)
+ dapm->target_bias_level = SND_SOC_BIAS_ON;
+ else
+ dapm->target_bias_level = SND_SOC_BIAS_STANDBY;
break;
case SND_SOC_DAPM_STREAM_SUSPEND:
- dapm->dev_power = 0;
+ dapm->target_bias_level = SND_SOC_BIAS_STANDBY;
break;
case SND_SOC_DAPM_STREAM_NOP:
- switch (dapm->bias_level) {
- case SND_SOC_BIAS_STANDBY:
- case SND_SOC_BIAS_OFF:
- dapm->dev_power = 0;
- break;
- default:
- dapm->dev_power = 1;
- break;
- }
+ dapm->target_bias_level = dapm->bias_level;
break;
default:
break;
@@ -1186,12 +1192,12 @@
}
/* Force all contexts in the card to the same bias state */
- power = 0;
+ bias = SND_SOC_BIAS_OFF;
list_for_each_entry(d, &card->dapm_list, list)
- if (d->dev_power)
- power = 1;
+ if (d->target_bias_level > bias)
+ bias = d->target_bias_level;
list_for_each_entry(d, &card->dapm_list, list)
- d->dev_power = power;
+ d->target_bias_level = bias;
/* Run all the bias changes in parallel */