Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (29 commits)
ide-tape: bump minor driver version
ide-tape: cleanup the remaining codestyle issues
ide-tape: fix syntax error in idetape_identify_device()
ide-tape: remove leftover OnStream support warning
ide-tape: collect module-related macro calls at the end
ide-tape: include proper headers
ide-tape: remove unused "length" arg from idetape_create_read_buffer_cmd()
ide-tape: remove struct idetape_id_gcw
ide-tape: cleanup and fix comments
ide-tape: shorten some function names
ide-tape: remove idetape_increase_max_pipeline_stages()
ide-tape: struct idetape_tape_t: shorten member names v2
ide-tape: struct idetape_tape_t: remove unused members
ide-tape: remove typedef idetape_chrdev_direction_t
ide-tape: simplify code branching in the interrupt handler
ide-tape: remove unreachable code chunk
ide-tape: remove struct idetape_read_position_result_t
ide-tape: refactor the debug logging facility
ide: add ide_read_error() inline helper
ide: add ide_read_[alt]status() inline helpers
...
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 9ad4e6f..8fd5aa4 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -780,6 +780,9 @@
loop use the MONITOR/MWAIT idle loop anyways. Performance should be the same
as idle=poll.
+ ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem
+ Claim all unknown PCI IDE storage controllers.
+
ignore_loglevel [KNL]
Ignore loglevel setting - this will print /all/
kernel messages to the console. Useful for debugging.
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 45b26ed..ab8fb25 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -1009,6 +1009,15 @@
normally be on; disable it only if you are running a custom hard
drive subsystem through an expansion card.
+config BLK_DEV_PALMCHIP_BK3710
+ tristate "Palmchip bk3710 IDE controller support"
+ depends on ARCH_DAVINCI
+ select BLK_DEV_IDEDMA_PCI
+ help
+ Say Y here if you want to support the onchip IDE controller on the
+ TI DaVinci SoC
+
+
config BLK_DEV_MPC8xx_IDE
tristate "MPC8xx IDE support"
depends on 8xx && (LWMON || IVMS8 || IVML24 || TQM8xxL) && IDE=y && BLK_DEV_IDE=y && !PPC_MERGE
diff --git a/drivers/ide/arm/Makefile b/drivers/ide/arm/Makefile
index 5f63ad2..936e7b0 100644
--- a/drivers/ide/arm/Makefile
+++ b/drivers/ide/arm/Makefile
@@ -2,6 +2,7 @@
obj-$(CONFIG_BLK_DEV_IDE_ICSIDE) += icside.o
obj-$(CONFIG_BLK_DEV_IDE_RAPIDE) += rapide.o
obj-$(CONFIG_BLK_DEV_IDE_BAST) += bast-ide.o
+obj-$(CONFIG_BLK_DEV_PALMCHIP_BK3710) += palm_bk3710.o
ifeq ($(CONFIG_IDE_ARM), m)
obj-m += ide_arm.o
diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c
index fb00f38..e816b0f 100644
--- a/drivers/ide/arm/icside.c
+++ b/drivers/ide/arm/icside.c
@@ -365,7 +365,7 @@
if (icside_dma_test_irq(drive))
return;
- ide_dump_status(drive, "DMA timeout", HWIF(drive)->INB(IDE_STATUS_REG));
+ ide_dump_status(drive, "DMA timeout", ide_read_status(drive));
icside_dma_end(drive);
}
diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c
new file mode 100644
index 0000000..c306997
--- /dev/null
+++ b/drivers/ide/arm/palm_bk3710.c
@@ -0,0 +1,395 @@
+/*
+ * Palmchip bk3710 IDE controller
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2007 MontaVista Software, Inc., <source@mvista.com>
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ----------------------------------------------------------------------------
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/hdreg.h>
+#include <linux/ide.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+/* Offset of the primary interface registers */
+#define IDE_PALM_ATA_PRI_REG_OFFSET 0x1F0
+
+/* Primary Control Offset */
+#define IDE_PALM_ATA_PRI_CTL_OFFSET 0x3F6
+
+/*
+ * PalmChip 3710 IDE Controller UDMA timing structure Definition
+ */
+struct palm_bk3710_udmatiming {
+ unsigned int rptime; /* Ready to pause time */
+ unsigned int cycletime; /* Cycle Time */
+};
+
+#define BK3710_BMICP 0x00
+#define BK3710_BMISP 0x02
+#define BK3710_BMIDTP 0x04
+#define BK3710_BMICS 0x08
+#define BK3710_BMISS 0x0A
+#define BK3710_BMIDTS 0x0C
+#define BK3710_IDETIMP 0x40
+#define BK3710_IDETIMS 0x42
+#define BK3710_SIDETIM 0x44
+#define BK3710_SLEWCTL 0x45
+#define BK3710_IDESTATUS 0x47
+#define BK3710_UDMACTL 0x48
+#define BK3710_UDMATIM 0x4A
+#define BK3710_MISCCTL 0x50
+#define BK3710_REGSTB 0x54
+#define BK3710_REGRCVR 0x58
+#define BK3710_DATSTB 0x5C
+#define BK3710_DATRCVR 0x60
+#define BK3710_DMASTB 0x64
+#define BK3710_DMARCVR 0x68
+#define BK3710_UDMASTB 0x6C
+#define BK3710_UDMATRP 0x70
+#define BK3710_UDMAENV 0x74
+#define BK3710_IORDYTMP 0x78
+#define BK3710_IORDYTMS 0x7C
+
+#include "../ide-timing.h"
+
+static long ide_palm_clk;
+
+static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = {
+ {160, 240}, /* UDMA Mode 0 */
+ {125, 160}, /* UDMA Mode 1 */
+ {100, 120}, /* UDMA Mode 2 */
+ {100, 90}, /* UDMA Mode 3 */
+ {85, 60}, /* UDMA Mode 4 */
+};
+
+static struct clk *ideclkp;
+
+static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev,
+ unsigned int mode)
+{
+ u8 tenv, trp, t0;
+ u32 val32;
+ u16 val16;
+
+ /* DMA Data Setup */
+ t0 = (palm_bk3710_udmatimings[mode].cycletime + ide_palm_clk - 1)
+ / ide_palm_clk - 1;
+ tenv = (20 + ide_palm_clk - 1) / ide_palm_clk - 1;
+ trp = (palm_bk3710_udmatimings[mode].rptime + ide_palm_clk - 1)
+ / ide_palm_clk - 1;
+
+ /* udmatim Register */
+ val16 = readw(base + BK3710_UDMATIM) & (dev ? 0xFF0F : 0xFFF0);
+ val16 |= (mode << (dev ? 4 : 0));
+ writew(val16, base + BK3710_UDMATIM);
+
+ /* udmastb Ultra DMA Access Strobe Width */
+ val32 = readl(base + BK3710_UDMASTB) & (0xFF << (dev ? 0 : 8));
+ val32 |= (t0 << (dev ? 8 : 0));
+ writel(val32, base + BK3710_UDMASTB);
+
+ /* udmatrp Ultra DMA Ready to Pause Time */
+ val32 = readl(base + BK3710_UDMATRP) & (0xFF << (dev ? 0 : 8));
+ val32 |= (trp << (dev ? 8 : 0));
+ writel(val32, base + BK3710_UDMATRP);
+
+ /* udmaenv Ultra DMA envelop Time */
+ val32 = readl(base + BK3710_UDMAENV) & (0xFF << (dev ? 0 : 8));
+ val32 |= (tenv << (dev ? 8 : 0));
+ writel(val32, base + BK3710_UDMAENV);
+
+ /* Enable UDMA for Device */
+ val16 = readw(base + BK3710_UDMACTL) | (1 << dev);
+ writew(val16, base + BK3710_UDMACTL);
+}
+
+static void palm_bk3710_setdmamode(void __iomem *base, unsigned int dev,
+ unsigned short min_cycle,
+ unsigned int mode)
+{
+ u8 td, tkw, t0;
+ u32 val32;
+ u16 val16;
+ struct ide_timing *t;
+ int cycletime;
+
+ t = ide_timing_find_mode(mode);
+ cycletime = max_t(int, t->cycle, min_cycle);
+
+ /* DMA Data Setup */
+ t0 = (cycletime + ide_palm_clk - 1) / ide_palm_clk;
+ td = (t->active + ide_palm_clk - 1) / ide_palm_clk;
+ tkw = t0 - td - 1;
+ td -= 1;
+
+ val32 = readl(base + BK3710_DMASTB) & (0xFF << (dev ? 0 : 8));
+ val32 |= (td << (dev ? 8 : 0));
+ writel(val32, base + BK3710_DMASTB);
+
+ val32 = readl(base + BK3710_DMARCVR) & (0xFF << (dev ? 0 : 8));
+ val32 |= (tkw << (dev ? 8 : 0));
+ writel(val32, base + BK3710_DMARCVR);
+
+ /* Disable UDMA for Device */
+ val16 = readw(base + BK3710_UDMACTL) & ~(1 << dev);
+ writew(val16, base + BK3710_UDMACTL);
+}
+
+static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate,
+ unsigned int dev, unsigned int cycletime,
+ unsigned int mode)
+{
+ u8 t2, t2i, t0;
+ u32 val32;
+ struct ide_timing *t;
+
+ /* PIO Data Setup */
+ t0 = (cycletime + ide_palm_clk - 1) / ide_palm_clk;
+ t2 = (ide_timing_find_mode(XFER_PIO_0 + mode)->active +
+ ide_palm_clk - 1) / ide_palm_clk;
+
+ t2i = t0 - t2 - 1;
+ t2 -= 1;
+
+ val32 = readl(base + BK3710_DATSTB) & (0xFF << (dev ? 0 : 8));
+ val32 |= (t2 << (dev ? 8 : 0));
+ writel(val32, base + BK3710_DATSTB);
+
+ val32 = readl(base + BK3710_DATRCVR) & (0xFF << (dev ? 0 : 8));
+ val32 |= (t2i << (dev ? 8 : 0));
+ writel(val32, base + BK3710_DATRCVR);
+
+ if (mate && mate->present) {
+ u8 mode2 = ide_get_best_pio_mode(mate, 255, 4);
+
+ if (mode2 < mode)
+ mode = mode2;
+ }
+
+ /* TASKFILE Setup */
+ t = ide_timing_find_mode(XFER_PIO_0 + mode);
+ t0 = (t->cyc8b + ide_palm_clk - 1) / ide_palm_clk;
+ t2 = (t->act8b + ide_palm_clk - 1) / ide_palm_clk;
+
+ t2i = t0 - t2 - 1;
+ t2 -= 1;
+
+ val32 = readl(base + BK3710_REGSTB) & (0xFF << (dev ? 0 : 8));
+ val32 |= (t2 << (dev ? 8 : 0));
+ writel(val32, base + BK3710_REGSTB);
+
+ val32 = readl(base + BK3710_REGRCVR) & (0xFF << (dev ? 0 : 8));
+ val32 |= (t2i << (dev ? 8 : 0));
+ writel(val32, base + BK3710_REGRCVR);
+}
+
+static void palm_bk3710_set_dma_mode(ide_drive_t *drive, u8 xferspeed)
+{
+ int is_slave = drive->dn & 1;
+ void __iomem *base = (void *)drive->hwif->dma_base;
+
+ if (xferspeed >= XFER_UDMA_0) {
+ palm_bk3710_setudmamode(base, is_slave,
+ xferspeed - XFER_UDMA_0);
+ } else {
+ palm_bk3710_setdmamode(base, is_slave, drive->id->eide_dma_min,
+ xferspeed);
+ }
+}
+
+static void palm_bk3710_set_pio_mode(ide_drive_t *drive, u8 pio)
+{
+ unsigned int cycle_time;
+ int is_slave = drive->dn & 1;
+ ide_drive_t *mate;
+ void __iomem *base = (void *)drive->hwif->dma_base;
+
+ /*
+ * Obtain the drive PIO data for tuning the Palm Chip registers
+ */
+ cycle_time = ide_pio_cycle_time(drive, pio);
+ mate = ide_get_paired_drive(drive);
+ palm_bk3710_setpiomode(base, mate, is_slave, cycle_time, pio);
+}
+
+static void __devinit palm_bk3710_chipinit(void __iomem *base)
+{
+ /*
+ * enable the reset_en of ATA controller so that when ata signals
+ * are brought out, by writing into device config. at that
+ * time por_n signal should not be 'Z' and have a stable value.
+ */
+ writel(0x0300, base + BK3710_MISCCTL);
+
+ /* wait for some time and deassert the reset of ATA Device. */
+ mdelay(100);
+
+ /* Deassert the Reset */
+ writel(0x0200, base + BK3710_MISCCTL);
+
+ /*
+ * Program the IDETIMP Register Value based on the following assumptions
+ *
+ * (ATA_IDETIMP_IDEEN , ENABLE ) |
+ * (ATA_IDETIMP_SLVTIMEN , DISABLE) |
+ * (ATA_IDETIMP_RDYSMPL , 70NS) |
+ * (ATA_IDETIMP_RDYRCVRY , 50NS) |
+ * (ATA_IDETIMP_DMAFTIM1 , PIOCOMP) |
+ * (ATA_IDETIMP_PREPOST1 , DISABLE) |
+ * (ATA_IDETIMP_RDYSEN1 , DISABLE) |
+ * (ATA_IDETIMP_PIOFTIM1 , DISABLE) |
+ * (ATA_IDETIMP_DMAFTIM0 , PIOCOMP) |
+ * (ATA_IDETIMP_PREPOST0 , DISABLE) |
+ * (ATA_IDETIMP_RDYSEN0 , DISABLE) |
+ * (ATA_IDETIMP_PIOFTIM0 , DISABLE)
+ */
+ writew(0xB388, base + BK3710_IDETIMP);
+
+ /*
+ * Configure SIDETIM Register
+ * (ATA_SIDETIM_RDYSMPS1 ,120NS ) |
+ * (ATA_SIDETIM_RDYRCYS1 ,120NS )
+ */
+ writeb(0, base + BK3710_SIDETIM);
+
+ /*
+ * UDMACTL Ultra-ATA DMA Control
+ * (ATA_UDMACTL_UDMAP1 , 0 ) |
+ * (ATA_UDMACTL_UDMAP0 , 0 )
+ *
+ */
+ writew(0, base + BK3710_UDMACTL);
+
+ /*
+ * MISCCTL Miscellaneous Conrol Register
+ * (ATA_MISCCTL_RSTMODEP , 1) |
+ * (ATA_MISCCTL_RESETP , 0) |
+ * (ATA_MISCCTL_TIMORIDE , 1)
+ */
+ writel(0x201, base + BK3710_MISCCTL);
+
+ /*
+ * IORDYTMP IORDY Timer for Primary Register
+ * (ATA_IORDYTMP_IORDYTMP , 0xffff )
+ */
+ writel(0xFFFF, base + BK3710_IORDYTMP);
+
+ /*
+ * Configure BMISP Register
+ * (ATA_BMISP_DMAEN1 , DISABLE ) |
+ * (ATA_BMISP_DMAEN0 , DISABLE ) |
+ * (ATA_BMISP_IORDYINT , CLEAR) |
+ * (ATA_BMISP_INTRSTAT , CLEAR) |
+ * (ATA_BMISP_DMAERROR , CLEAR)
+ */
+ writew(0, base + BK3710_BMISP);
+
+ palm_bk3710_setpiomode(base, NULL, 0, 600, 0);
+ palm_bk3710_setpiomode(base, NULL, 1, 600, 0);
+}
+static int __devinit palm_bk3710_probe(struct platform_device *pdev)
+{
+ hw_regs_t ide_ctlr_info;
+ int index = 0;
+ int pribase;
+ struct clk *clkp;
+ struct resource *mem, *irq;
+ ide_hwif_t *hwif;
+ void __iomem *base;
+
+ clkp = clk_get(NULL, "IDECLK");
+ if (IS_ERR(clkp))
+ return -ENODEV;
+
+ ideclkp = clkp;
+ clk_enable(ideclkp);
+ ide_palm_clk = clk_get_rate(ideclkp)/100000;
+ ide_palm_clk = (10000/ide_palm_clk) + 1;
+ /* Register the IDE interface with Linux ATA Interface */
+ memset(&ide_ctlr_info, 0, sizeof(ide_ctlr_info));
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (mem == NULL) {
+ printk(KERN_ERR "failed to get memory region resource\n");
+ return -ENODEV;
+ }
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (irq == NULL) {
+ printk(KERN_ERR "failed to get IRQ resource\n");
+ return -ENODEV;
+ }
+
+ base = (void *)mem->start;
+
+ /* Configure the Palm Chip controller */
+ palm_bk3710_chipinit(base);
+
+ pribase = mem->start + IDE_PALM_ATA_PRI_REG_OFFSET;
+ for (index = 0; index < IDE_NR_PORTS - 2; index++)
+ ide_ctlr_info.io_ports[index] = pribase + index;
+ ide_ctlr_info.io_ports[IDE_CONTROL_OFFSET] = mem->start +
+ IDE_PALM_ATA_PRI_CTL_OFFSET;
+ ide_ctlr_info.irq = irq->start;
+ ide_ctlr_info.chipset = ide_palm3710;
+
+ if (ide_register_hw(&ide_ctlr_info, NULL, &hwif) < 0) {
+ printk(KERN_WARNING "Palm Chip BK3710 IDE Register Fail\n");
+ return -ENODEV;
+ }
+
+ hwif->set_pio_mode = &palm_bk3710_set_pio_mode;
+ hwif->set_dma_mode = &palm_bk3710_set_dma_mode;
+ hwif->mmio = 1;
+ default_hwif_mmiops(hwif);
+ hwif->cbl = ATA_CBL_PATA80;
+ hwif->ultra_mask = 0x1f; /* Ultra DMA Mode 4 Max
+ (input clk 99MHz) */
+ hwif->mwdma_mask = 0x7;
+ hwif->drives[0].autotune = 1;
+ hwif->drives[1].autotune = 1;
+
+ ide_setup_dma(hwif, mem->start);
+
+ return 0;
+}
+
+static struct platform_driver platform_bk_driver = {
+ .driver = {
+ .name = "palm_bk3710",
+ },
+ .probe = palm_bk3710_probe,
+ .remove = NULL,
+};
+
+static int __init palm_bk3710_init(void)
+{
+ return platform_driver_register(&platform_bk_driver);
+}
+
+module_init(palm_bk3710_init);
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c
index 00587a8..e79bf8f 100644
--- a/drivers/ide/cris/ide-cris.c
+++ b/drivers/ide/cris/ide-cris.c
@@ -753,6 +753,25 @@
cris_ide_set_speed(TYPE_DMA, 0, strobe, hold);
}
+static void __init cris_setup_ports(hw_regs_t *hw, unsigned long base)
+{
+ int i;
+
+ memset(hw, 0, sizeof(*hw));
+
+ for (i = 0; i <= 7; i++)
+ hw->io_ports[i] = base + cris_ide_reg_addr(i, 0, 1);
+
+ /*
+ * the IDE control register is at ATA address 6,
+ * with CS1 active instead of CS0
+ */
+ hw->io_ports[IDE_CONTROL_OFFSET] = base + cris_ide_reg_addr(6, 1, 0);
+
+ hw->irq = ide_default_irq(0);
+ hw->ack_intr = cris_ide_ack_intr;
+}
+
static const struct ide_port_info cris_port_info __initdata = {
.chipset = ide_etrax100,
.host_flags = IDE_HFLAG_NO_ATAPI_DMA |
@@ -765,24 +784,16 @@
static int __init init_e100_ide(void)
{
hw_regs_t hw;
- int ide_offsets[IDE_NR_PORTS], h, i;
+ int h;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
printk("ide: ETRAX FS built-in ATA DMA controller\n");
- for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
- ide_offsets[i] = cris_ide_reg_addr(i, 0, 1);
-
- /* the IDE control register is at ATA address 6, with CS1 active instead of CS0 */
- ide_offsets[IDE_CONTROL_OFFSET] = cris_ide_reg_addr(6, 1, 0);
-
for (h = 0; h < 4; h++) {
ide_hwif_t *hwif = NULL;
- ide_setup_ports(&hw, cris_ide_base_address(h),
- ide_offsets,
- 0, 0, cris_ide_ack_intr,
- ide_default_irq(0));
+ cris_setup_ports(&hw, cris_ide_base_address(h));
+
hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]);
if (hwif == NULL)
continue;
diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c
index 25aaeae..e07b189 100644
--- a/drivers/ide/ide-acpi.c
+++ b/drivers/ide/ide-acpi.c
@@ -171,7 +171,7 @@
static acpi_handle ide_acpi_hwif_get_handle(ide_hwif_t *hwif)
{
struct device *dev = hwif->gendev.parent;
- acpi_handle dev_handle;
+ acpi_handle uninitialized_var(dev_handle);
acpi_integer pcidevfn;
acpi_handle chan_handle;
int err;
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index ee4d458..5e42c19 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -295,7 +295,8 @@
int stat, err, sense_key;
/* Check for errors. */
- stat = HWIF(drive)->INB(IDE_STATUS_REG);
+ stat = ide_read_status(drive);
+
if (stat_ret)
*stat_ret = stat;
@@ -303,7 +304,7 @@
return 0;
/* Get the IDE error register. */
- err = HWIF(drive)->INB(IDE_ERROR_REG);
+ err = ide_read_error(drive);
sense_key = err >> 4;
if (rq == NULL) {
@@ -692,7 +693,7 @@
/* Some drives (ASUS) seem to tell us that status
* info is available. just get it and ignore.
*/
- (void) HWIF(drive)->INB(IDE_STATUS_REG);
+ (void)ide_read_status(drive);
return 0;
} else {
/* Drive wants a command packet, or invalid ireason... */
@@ -1326,7 +1327,7 @@
if (blk_fs_request(rq)) {
if (info->cd_flags & IDE_CD_FLAG_SEEKING) {
unsigned long elapsed = jiffies - info->start_seek;
- int stat = HWIF(drive)->INB(IDE_STATUS_REG);
+ int stat = ide_read_status(drive);
if ((stat & SEEK_STAT) != SEEK_STAT) {
if (elapsed < IDECD_SEEK_TIMEOUT) {
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index 3cf59f2..a4bb328 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -147,7 +147,8 @@
u8 stat = 0, dma_stat = 0;
dma_stat = HWIF(drive)->ide_dma_end(drive);
- stat = HWIF(drive)->INB(IDE_STATUS_REG); /* get drive status */
+ stat = ide_read_status(drive);
+
if (OK_STAT(stat,DRIVE_READY,drive->bad_wstat|DRQ_STAT)) {
if (!dma_stat) {
struct request *rq = HWGROUP(drive)->rq;
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index f8fe6ee..faf22d7 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -465,7 +465,7 @@
idefloppy_pc_t *pc;
struct request *rq;
- (void)drive->hwif->INB(IDE_ERROR_REG);
+ (void)ide_read_error(drive);
pc = idefloppy_next_pc_storage(drive);
rq = idefloppy_next_rq_storage(drive);
idefloppy_create_request_sense_cmd(pc);
@@ -501,7 +501,7 @@
}
/* Clear the interrupt */
- stat = drive->hwif->INB(IDE_STATUS_REG);
+ stat = ide_read_status(drive);
/* No more interrupts */
if ((stat & DRQ_STAT) == 0) {
@@ -1246,7 +1246,7 @@
u8 stat;
local_irq_save(flags);
- stat = drive->hwif->INB(IDE_STATUS_REG);
+ stat = ide_read_status(drive);
local_irq_restore(flags);
progress_indication = ((stat & SEEK_STAT) == 0) ? 0 : 0x10000;
diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c
index be469db..709b9e4 100644
--- a/drivers/ide/ide-generic.c
+++ b/drivers/ide/ide-generic.c
@@ -20,8 +20,14 @@
if (ide_hwifs[0].io_ports[IDE_DATA_OFFSET])
ide_get_lock(NULL, NULL); /* for atari only */
- for (i = 0; i < MAX_HWIFS; i++)
- idx[i] = ide_hwifs[i].present ? 0xff : i;
+ for (i = 0; i < MAX_HWIFS; i++) {
+ ide_hwif_t *hwif = &ide_hwifs[i];
+
+ if (hwif->io_ports[IDE_DATA_OFFSET] && !hwif->present)
+ idx[i] = i;
+ else
+ idx[i] = 0xff;
+ }
ide_device_add_all(idx, NULL);
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 4bddef0..3addbe4 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -466,7 +466,7 @@
return ide_stopped;
}
- if (hwif->INB(IDE_STATUS_REG) & (BUSY_STAT|DRQ_STAT))
+ if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT))
rq->errors |= ERROR_RESET;
if ((rq->errors & ERROR_RESET) == ERROR_RESET) {
@@ -493,7 +493,7 @@
/* add decoding error stuff */
}
- if (hwif->INB(IDE_STATUS_REG) & (BUSY_STAT|DRQ_STAT))
+ if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT))
/* force an abort */
hwif->OUTB(WIN_IDLEIMMEDIATE, IDE_COMMAND_REG);
@@ -821,9 +821,8 @@
#ifdef DEBUG
printk("%s: DRIVE_CMD (null)\n", drive->name);
#endif
- ide_end_drive_cmd(drive,
- hwif->INB(IDE_STATUS_REG),
- hwif->INB(IDE_ERROR_REG));
+ ide_end_drive_cmd(drive, ide_read_status(drive), ide_read_error(drive));
+
return ide_stopped;
}
@@ -1231,7 +1230,7 @@
printk(KERN_WARNING "%s: DMA timeout error\n", drive->name);
(void)HWIF(drive)->ide_dma_end(drive);
ret = ide_error(drive, "dma timeout error",
- hwif->INB(IDE_STATUS_REG));
+ ide_read_status(drive));
} else {
printk(KERN_WARNING "%s: DMA timeout retry\n", drive->name);
hwif->dma_timeout(drive);
@@ -1355,7 +1354,8 @@
startstop = ide_dma_timeout_retry(drive, wait);
} else
startstop =
- ide_error(drive, "irq timeout", hwif->INB(IDE_STATUS_REG));
+ ide_error(drive, "irq timeout",
+ ide_read_status(drive));
}
drive->service_time = jiffies - drive->service_start;
spin_lock_irq(&ide_lock);
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index a95178f..c32e759 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -430,10 +430,10 @@
* about possible isa-pnp and pci-pnp issues yet.
*/
if (IDE_CONTROL_REG)
- stat = hwif->INB(IDE_ALTSTATUS_REG);
+ stat = ide_read_altstatus(drive);
else
/* Note: this may clear a pending IRQ!! */
- stat = hwif->INB(IDE_STATUS_REG);
+ stat = ide_read_status(drive);
if (stat & BUSY_STAT)
/* drive busy: definitely not interrupting */
@@ -458,23 +458,24 @@
*/
static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long timeout, u8 *rstat)
{
- ide_hwif_t *hwif = drive->hwif;
unsigned long flags;
int i;
u8 stat;
udelay(1); /* spec allows drive 400ns to assert "BUSY" */
- if ((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) {
+ stat = ide_read_status(drive);
+
+ if (stat & BUSY_STAT) {
local_irq_set(flags);
timeout += jiffies;
- while ((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) {
+ while ((stat = ide_read_status(drive)) & BUSY_STAT) {
if (time_after(jiffies, timeout)) {
/*
* One last read after the timeout in case
* heavy interrupt load made us not make any
* progress during the timeout..
*/
- stat = hwif->INB(IDE_STATUS_REG);
+ stat = ide_read_status(drive);
if (!(stat & BUSY_STAT))
break;
@@ -494,7 +495,9 @@
*/
for (i = 0; i < 10; i++) {
udelay(1);
- if (OK_STAT((stat = hwif->INB(IDE_STATUS_REG)), good, bad)) {
+ stat = ide_read_status(drive);
+
+ if (OK_STAT(stat, good, bad)) {
*rstat = stat;
return 0;
}
@@ -617,6 +620,7 @@
ide_hwif_t *hwif = drive->hwif;
struct hd_driveid *id;
unsigned long timeout, flags;
+ u8 stat;
/*
* Re-read drive->id for possible DMA mode
@@ -633,10 +637,15 @@
SELECT_MASK(drive, 0);
return 0; /* drive timed-out */
}
+
msleep(50); /* give drive a breather */
- } while (hwif->INB(IDE_ALTSTATUS_REG) & BUSY_STAT);
+ stat = ide_read_altstatus(drive);
+ } while (stat & BUSY_STAT);
+
msleep(50); /* wait for IRQ and DRQ_STAT */
- if (!OK_STAT(hwif->INB(IDE_STATUS_REG),DRQ_STAT,BAD_R_STAT)) {
+ stat = ide_read_status(drive);
+
+ if (!OK_STAT(stat, DRQ_STAT, BAD_R_STAT)) {
SELECT_MASK(drive, 0);
printk("%s: CHECK for good STATUS\n", drive->name);
return 0;
@@ -649,7 +658,7 @@
return 0;
}
ata_input_data(drive, id, SECTOR_WORDS);
- (void) hwif->INB(IDE_STATUS_REG); /* clear drive IRQ */
+ (void)ide_read_status(drive); /* clear drive IRQ */
local_irq_enable();
local_irq_restore(flags);
ide_fix_driveid(id);
@@ -850,17 +859,16 @@
static ide_startstop_t atapi_reset_pollfunc (ide_drive_t *drive)
{
ide_hwgroup_t *hwgroup = HWGROUP(drive);
- ide_hwif_t *hwif = HWIF(drive);
u8 stat;
SELECT_DRIVE(drive);
udelay (10);
+ stat = ide_read_status(drive);
- if (OK_STAT(stat = hwif->INB(IDE_STATUS_REG), 0, BUSY_STAT)) {
+ if (OK_STAT(stat, 0, BUSY_STAT))
printk("%s: ATAPI reset complete\n", drive->name);
- } else {
+ else {
if (time_before(jiffies, hwgroup->poll_timeout)) {
- BUG_ON(HWGROUP(drive)->handler != NULL);
ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20, NULL);
/* continue polling */
return ide_started;
@@ -898,9 +906,10 @@
}
}
- if (!OK_STAT(tmp = hwif->INB(IDE_STATUS_REG), 0, BUSY_STAT)) {
+ tmp = ide_read_status(drive);
+
+ if (!OK_STAT(tmp, 0, BUSY_STAT)) {
if (time_before(jiffies, hwgroup->poll_timeout)) {
- BUG_ON(HWGROUP(drive)->handler != NULL);
ide_set_handler(drive, &reset_pollfunc, HZ/20, NULL);
/* continue polling */
return ide_started;
@@ -909,7 +918,9 @@
drive->failures++;
} else {
printk("%s: reset: ", hwif->name);
- if ((tmp = hwif->INB(IDE_ERROR_REG)) == 1) {
+ tmp = ide_read_error(drive);
+
+ if (tmp == 1) {
printk("success\n");
drive->failures = 0;
} else {
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index b42940d..1ff676cc 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -578,7 +578,7 @@
}
printk("}\n");
if ((stat & (BUSY_STAT|ERR_STAT)) == ERR_STAT) {
- err = drive->hwif->INB(IDE_ERROR_REG);
+ err = ide_read_error(drive);
printk("%s: %s: error=0x%02x ", drive->name, msg, err);
if (drive->media == ide_disk)
ide_dump_ata_error(drive, err);
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 9c07bdb..fd0ef82 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -264,8 +264,7 @@
static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
{
ide_hwif_t *hwif = HWIF(drive);
- int rc;
- unsigned long hd_status;
+ int use_altstatus = 0, rc;
unsigned long timeout;
u8 s = 0, a = 0;
@@ -273,19 +272,17 @@
msleep(50);
if (IDE_CONTROL_REG) {
- a = hwif->INB(IDE_ALTSTATUS_REG);
- s = hwif->INB(IDE_STATUS_REG);
- if ((a ^ s) & ~INDEX_STAT) {
- printk(KERN_INFO "%s: probing with STATUS(0x%02x) instead of "
- "ALTSTATUS(0x%02x)\n", drive->name, s, a);
+ a = ide_read_altstatus(drive);
+ s = ide_read_status(drive);
+ if ((a ^ s) & ~INDEX_STAT)
/* ancient Seagate drives, broken interfaces */
- hd_status = IDE_STATUS_REG;
- } else {
+ printk(KERN_INFO "%s: probing with STATUS(0x%02x) "
+ "instead of ALTSTATUS(0x%02x)\n",
+ drive->name, s, a);
+ else
/* use non-intrusive polling */
- hd_status = IDE_ALTSTATUS_REG;
- }
- } else
- hd_status = IDE_STATUS_REG;
+ use_altstatus = 1;
+ }
/* set features register for atapi
* identify command to be sure of reply
@@ -306,11 +303,15 @@
}
/* give drive a breather */
msleep(50);
- } while ((hwif->INB(hd_status)) & BUSY_STAT);
+ s = use_altstatus ? ide_read_altstatus(drive)
+ : ide_read_status(drive);
+ } while (s & BUSY_STAT);
/* wait for IRQ and DRQ_STAT */
msleep(50);
- if (OK_STAT((hwif->INB(IDE_STATUS_REG)), DRQ_STAT, BAD_R_STAT)) {
+ s = ide_read_status(drive);
+
+ if (OK_STAT(s, DRQ_STAT, BAD_R_STAT)) {
unsigned long flags;
/* local CPU only; some systems need this */
@@ -320,7 +321,7 @@
/* drive responded with ID */
rc = 0;
/* clear drive IRQ */
- (void) hwif->INB(IDE_STATUS_REG);
+ (void)ide_read_status(drive);
local_irq_restore(flags);
} else {
/* drive refused ID */
@@ -367,7 +368,7 @@
ide_set_irq(drive, 0);
/* clear drive IRQ */
- (void) hwif->INB(IDE_STATUS_REG);
+ (void)ide_read_status(drive);
udelay(5);
irq = probe_irq_off(cookie);
if (!hwif->irq) {
@@ -455,7 +456,9 @@
return 3;
}
- if (OK_STAT((hwif->INB(IDE_STATUS_REG)), READY_STAT, BUSY_STAT) ||
+ stat = ide_read_status(drive);
+
+ if (OK_STAT(stat, READY_STAT, BUSY_STAT) ||
drive->present || cmd == WIN_PIDENTIFY) {
/* send cmd and wait */
if ((rc = try_to_identify(drive, cmd))) {
@@ -463,7 +466,7 @@
rc = try_to_identify(drive,cmd);
}
- stat = hwif->INB(IDE_STATUS_REG);
+ stat = ide_read_status(drive);
if (stat == (BUSY_STAT | READY_STAT))
return 4;
@@ -482,7 +485,7 @@
}
/* ensure drive IRQ is clear */
- stat = hwif->INB(IDE_STATUS_REG);
+ stat = ide_read_status(drive);
if (rc == 1)
printk(KERN_ERR "%s: no response (status = 0x%02x)\n",
@@ -496,7 +499,7 @@
SELECT_DRIVE(&hwif->drives[0]);
msleep(50);
/* ensure drive irq is clear */
- (void) hwif->INB(IDE_STATUS_REG);
+ (void)ide_read_status(drive);
}
return rc;
}
@@ -521,7 +524,7 @@
msleep(50);
- stat = hwif->INB(IDE_STATUS_REG);
+ stat = ide_read_status(drive);
if (!OK_STAT(stat, 0, BAD_STAT))
printk(KERN_CONT "failed (status = 0x%02x)\n", stat);
diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c
index 975c0ff..bab88ca 100644
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -65,6 +65,7 @@
case ide_4drives: name = "4drives"; break;
case ide_pmac: name = "mac-io"; break;
case ide_au1xxx: name = "au1xxx"; break;
+ case ide_palm3710: name = "palm3710"; break;
case ide_etrax100: name = "etrax100"; break;
case ide_acorn: name = "acorn"; break;
default: name = "(unknown)"; break;
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index bf40d8c..49dd2e7 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -15,7 +15,7 @@
* Documentation/ide/ChangeLog.ide-tape.1995-2002
*/
-#define IDETAPE_VERSION "1.19"
+#define IDETAPE_VERSION "1.20"
#include <linux/module.h>
#include <linux/types.h>
@@ -39,63 +39,70 @@
#include <scsi/scsi.h>
#include <asm/byteorder.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/irq.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
#include <asm/unaligned.h>
#include <linux/mtio.h>
+enum {
+ /* output errors only */
+ DBG_ERR = (1 << 0),
+ /* output all sense key/asc */
+ DBG_SENSE = (1 << 1),
+ /* info regarding all chrdev-related procedures */
+ DBG_CHRDEV = (1 << 2),
+ /* all remaining procedures */
+ DBG_PROCS = (1 << 3),
+ /* buffer alloc info (pc_stack & rq_stack) */
+ DBG_PCRQ_STACK = (1 << 4),
+};
+
+/* define to see debug info */
+#define IDETAPE_DEBUG_LOG 0
+
+#if IDETAPE_DEBUG_LOG
+#define debug_log(lvl, fmt, args...) \
+{ \
+ if (tape->debug_mask & lvl) \
+ printk(KERN_INFO "ide-tape: " fmt, ## args); \
+}
+#else
+#define debug_log(lvl, fmt, args...) do {} while (0)
+#endif
+
/**************************** Tunable parameters *****************************/
/*
- * Pipelined mode parameters.
+ * Pipelined mode parameters.
*
- * We try to use the minimum number of stages which is enough to
- * keep the tape constantly streaming. To accomplish that, we implement
- * a feedback loop around the maximum number of stages:
+ * We try to use the minimum number of stages which is enough to keep the tape
+ * constantly streaming. To accomplish that, we implement a feedback loop around
+ * the maximum number of stages:
*
- * We start from MIN maximum stages (we will not even use MIN stages
- * if we don't need them), increment it by RATE*(MAX-MIN)
- * whenever we sense that the pipeline is empty, until we reach
- * the optimum value or until we reach MAX.
+ * We start from MIN maximum stages (we will not even use MIN stages if we don't
+ * need them), increment it by RATE*(MAX-MIN) whenever we sense that the
+ * pipeline is empty, until we reach the optimum value or until we reach MAX.
*
- * Setting the following parameter to 0 is illegal: the pipelined mode
- * cannot be disabled (calculate_speeds() divides by tape->max_stages.)
+ * Setting the following parameter to 0 is illegal: the pipelined mode cannot be
+ * disabled (idetape_calculate_speeds() divides by tape->max_stages.)
*/
#define IDETAPE_MIN_PIPELINE_STAGES 1
#define IDETAPE_MAX_PIPELINE_STAGES 400
#define IDETAPE_INCREASE_STAGES_RATE 20
/*
- * The following are used to debug the driver:
+ * After each failed packet command we issue a request sense command and retry
+ * the packet command IDETAPE_MAX_PC_RETRIES times.
*
- * Setting IDETAPE_DEBUG_LOG to 1 will log driver flow control.
- *
- * Setting them to 0 will restore normal operation mode:
- *
- * 1. Disable logging normal successful operations.
- * 2. Disable self-sanity checks.
- * 3. Errors will still be logged, of course.
- *
- * All the #if DEBUG code will be removed some day, when the driver
- * is verified to be stable enough. This will make it much more
- * esthetic.
- */
-#define IDETAPE_DEBUG_LOG 0
-
-/*
- * After each failed packet command we issue a request sense command
- * and retry the packet command IDETAPE_MAX_PC_RETRIES times.
- *
- * Setting IDETAPE_MAX_PC_RETRIES to 0 will disable retries.
+ * Setting IDETAPE_MAX_PC_RETRIES to 0 will disable retries.
*/
#define IDETAPE_MAX_PC_RETRIES 3
/*
- * With each packet command, we allocate a buffer of
- * IDETAPE_PC_BUFFER_SIZE bytes. This is used for several packet
- * commands (Not for READ/WRITE commands).
+ * With each packet command, we allocate a buffer of IDETAPE_PC_BUFFER_SIZE
+ * bytes. This is used for several packet commands (Not for READ/WRITE commands)
*/
#define IDETAPE_PC_BUFFER_SIZE 256
@@ -114,48 +121,39 @@
#define IDETAPE_WAIT_CMD (900*HZ)
/*
- * The following parameter is used to select the point in the internal
- * tape fifo in which we will start to refill the buffer. Decreasing
- * the following parameter will improve the system's latency and
- * interactive response, while using a high value might improve system
- * throughput.
+ * The following parameter is used to select the point in the internal tape fifo
+ * in which we will start to refill the buffer. Decreasing the following
+ * parameter will improve the system's latency and interactive response, while
+ * using a high value might improve system throughput.
*/
-#define IDETAPE_FIFO_THRESHOLD 2
+#define IDETAPE_FIFO_THRESHOLD 2
/*
- * DSC polling parameters.
+ * DSC polling parameters.
*
- * Polling for DSC (a single bit in the status register) is a very
- * important function in ide-tape. There are two cases in which we
- * poll for DSC:
+ * Polling for DSC (a single bit in the status register) is a very important
+ * function in ide-tape. There are two cases in which we poll for DSC:
*
- * 1. Before a read/write packet command, to ensure that we
- * can transfer data from/to the tape's data buffers, without
- * causing an actual media access. In case the tape is not
- * ready yet, we take out our request from the device
- * request queue, so that ide.c will service requests from
- * the other device on the same interface meanwhile.
+ * 1. Before a read/write packet command, to ensure that we can transfer data
+ * from/to the tape's data buffers, without causing an actual media access.
+ * In case the tape is not ready yet, we take out our request from the device
+ * request queue, so that ide.c could service requests from the other device
+ * on the same interface in the meantime.
*
- * 2. After the successful initialization of a "media access
- * packet command", which is a command which can take a long
- * time to complete (it can be several seconds or even an hour).
+ * 2. After the successful initialization of a "media access packet command",
+ * which is a command that can take a long time to complete (the interval can
+ * range from several seconds to even an hour). Again, we postpone our request
+ * in the middle to free the bus for the other device. The polling frequency
+ * here should be lower than the read/write frequency since those media access
+ * commands are slow. We start from a "fast" frequency - IDETAPE_DSC_MA_FAST
+ * (1 second), and if we don't receive DSC after IDETAPE_DSC_MA_THRESHOLD
+ * (5 min), we switch it to a lower frequency - IDETAPE_DSC_MA_SLOW (1 min).
*
- * Again, we postpone our request in the middle to free the bus
- * for the other device. The polling frequency here should be
- * lower than the read/write frequency since those media access
- * commands are slow. We start from a "fast" frequency -
- * IDETAPE_DSC_MA_FAST (one second), and if we don't receive DSC
- * after IDETAPE_DSC_MA_THRESHOLD (5 minutes), we switch it to a
- * lower frequency - IDETAPE_DSC_MA_SLOW (1 minute).
- *
- * We also set a timeout for the timer, in case something goes wrong.
- * The timeout should be longer then the maximum execution time of a
- * tape operation.
+ * We also set a timeout for the timer, in case something goes wrong. The
+ * timeout should be longer then the maximum execution time of a tape operation.
*/
-
-/*
- * DSC timings.
- */
+
+/* DSC timings. */
#define IDETAPE_DSC_RW_MIN 5*HZ/100 /* 50 msec */
#define IDETAPE_DSC_RW_MAX 40*HZ/100 /* 400 msec */
#define IDETAPE_DSC_RW_TIMEOUT 2*60*HZ /* 2 minutes */
@@ -166,19 +164,15 @@
/*************************** End of tunable parameters ***********************/
-/*
- * Read/Write error simulation
- */
+/* Read/Write error simulation */
#define SIMULATE_ERRORS 0
-/*
- * For general magnetic tape device compatibility.
- */
-typedef enum {
- idetape_direction_none,
- idetape_direction_read,
- idetape_direction_write
-} idetape_chrdev_direction_t;
+/* tape directions */
+enum {
+ IDETAPE_DIR_NONE = (1 << 0),
+ IDETAPE_DIR_READ = (1 << 1),
+ IDETAPE_DIR_WRITE = (1 << 2),
+};
struct idetape_bh {
u32 b_size;
@@ -187,24 +181,32 @@
char *b_data;
};
-/*
- * Our view of a packet command.
- */
typedef struct idetape_packet_command_s {
- u8 c[12]; /* Actual packet bytes */
- int retries; /* On each retry, we increment retries */
- int error; /* Error code */
- int request_transfer; /* Bytes to transfer */
- int actually_transferred; /* Bytes actually transferred */
- int buffer_size; /* Size of our data buffer */
+ /* Actual packet bytes */
+ u8 c[12];
+ /* On each retry, we increment retries */
+ int retries;
+ /* Error code */
+ int error;
+ /* Bytes to transfer */
+ int request_transfer;
+ /* Bytes actually transferred */
+ int actually_transferred;
+ /* Size of our data buffer */
+ int buffer_size;
struct idetape_bh *bh;
char *b_data;
int b_count;
- u8 *buffer; /* Data buffer */
- u8 *current_position; /* Pointer into the above buffer */
- ide_startstop_t (*callback) (ide_drive_t *); /* Called when this packet command is completed */
- u8 pc_buffer[IDETAPE_PC_BUFFER_SIZE]; /* Temporary buffer */
- unsigned long flags; /* Status/Action bit flags: long for set_bit */
+ /* Data buffer */
+ u8 *buffer;
+ /* Pointer into the above buffer */
+ u8 *current_position;
+ /* Called when this packet command is completed */
+ ide_startstop_t (*callback) (ide_drive_t *);
+ /* Temporary buffer */
+ u8 pc_buffer[IDETAPE_PC_BUFFER_SIZE];
+ /* Status/Action bit flags: long for set_bit */
+ unsigned long flags;
} idetape_pc_t;
/*
@@ -223,9 +225,7 @@
/* Data direction */
#define PC_WRITING 5
-/*
- * A pipeline stage.
- */
+/* A pipeline stage. */
typedef struct idetape_stage_s {
struct request rq; /* The corresponding request */
struct idetape_bh *bh; /* The data buffers */
@@ -233,9 +233,8 @@
} idetape_stage_t;
/*
- * Most of our global data which we need to save even as we leave the
- * driver due to an interrupt or a timer event is stored in a variable
- * of type idetape_tape_t, defined below.
+ * Most of our global data which we need to save even as we leave the driver due
+ * to an interrupt or a timer event is stored in the struct defined below.
*/
typedef struct ide_tape_obj {
ide_drive_t *drive;
@@ -271,15 +270,14 @@
int rq_stack_index;
/*
- * DSC polling variables.
+ * DSC polling variables.
*
- * While polling for DSC we use postponed_rq to postpone the
- * current request so that ide.c will be able to service
- * pending requests on the other device. Note that at most
- * we will have only one DSC (usually data transfer) request
- * in the device request queue. Additional requests can be
- * queued in our internal pipeline, but they will be visible
- * to ide.c only one at a time.
+ * While polling for DSC we use postponed_rq to postpone the current
+ * request so that ide.c will be able to service pending requests on the
+ * other device. Note that at most we will have only one DSC (usually
+ * data transfer) request in the device request queue. Additional
+ * requests can be queued in our internal pipeline, but they will be
+ * visible to ide.c only one at a time.
*/
struct request *postponed_rq;
/* The time in which we started polling for DSC */
@@ -287,73 +285,57 @@
/* Timer used to poll for dsc */
struct timer_list dsc_timer;
/* Read/Write dsc polling frequency */
- unsigned long best_dsc_rw_frequency;
- /* The current polling frequency */
- unsigned long dsc_polling_frequency;
- /* Maximum waiting time */
+ unsigned long best_dsc_rw_freq;
+ unsigned long dsc_poll_freq;
unsigned long dsc_timeout;
- /*
- * Read position information
- */
+ /* Read position information */
u8 partition;
/* Current block */
- unsigned int first_frame_position;
- unsigned int last_frame_position;
- unsigned int blocks_in_buffer;
+ unsigned int first_frame;
- /*
- * Last error information
- */
+ /* Last error information */
u8 sense_key, asc, ascq;
- /*
- * Character device operation
- */
+ /* Character device operation */
unsigned int minor;
/* device name */
char name[4];
/* Current character device data transfer direction */
- idetape_chrdev_direction_t chrdev_direction;
+ u8 chrdev_dir;
- /*
- * Device information
- */
- /* Usually 512 or 1024 bytes */
- unsigned short tape_block_size;
+ /* tape block size, usually 512 or 1024 bytes */
+ unsigned short blk_size;
int user_bs_factor;
/* Copy of the tape's Capabilities and Mechanical Page */
u8 caps[20];
/*
- * Active data transfer request parameters.
+ * Active data transfer request parameters.
*
- * At most, there is only one ide-tape originated data transfer
- * request in the device request queue. This allows ide.c to
- * easily service requests from the other device when we
- * postpone our active request. In the pipelined operation
- * mode, we use our internal pipeline structure to hold
- * more data requests.
- *
- * The data buffer size is chosen based on the tape's
- * recommendation.
+ * At most, there is only one ide-tape originated data transfer request
+ * in the device request queue. This allows ide.c to easily service
+ * requests from the other device when we postpone our active request.
+ * In the pipelined operation mode, we use our internal pipeline
+ * structure to hold more data requests. The data buffer size is chosen
+ * based on the tape's recommendation.
*/
- /* Pointer to the request which is waiting in the device request queue */
- struct request *active_data_request;
- /* Data buffer size (chosen based on the tape's recommendation */
+ /* ptr to the request which is waiting in the device request queue */
+ struct request *active_data_rq;
+ /* Data buffer size chosen based on the tape's recommendation */
int stage_size;
idetape_stage_t *merge_stage;
int merge_stage_size;
struct idetape_bh *bh;
char *b_data;
int b_count;
-
+
/*
- * Pipeline parameters.
+ * Pipeline parameters.
*
- * To accomplish non-pipelined mode, we simply set the following
- * variables to zero (or NULL, where appropriate).
+ * To accomplish non-pipelined mode, we simply set the following
+ * variables to zero (or NULL, where appropriate).
*/
/* Number of currently used stages */
int nr_stages;
@@ -378,20 +360,13 @@
/* Status/Action flags: long for set_bit */
unsigned long flags;
/* protects the ide-tape queue */
- spinlock_t spinlock;
+ spinlock_t lock;
- /*
- * Measures average tape speed
- */
+ /* Measures average tape speed */
unsigned long avg_time;
int avg_size;
int avg_speed;
- char vendor_id[10];
- char product_id[18];
- char firmware_revision[6];
- int firmware_revision_num;
-
/* the door is currently locked */
int door_locked;
/* the tape hardware is write protected */
@@ -400,11 +375,9 @@
char write_prot;
/*
- * Limit the number of times a request can
- * be postponed, to avoid an infinite postpone
- * deadlock.
+ * Limit the number of times a request can be postponed, to avoid an
+ * infinite postpone deadlock.
*/
- /* request postpone count limit */
int postpone_cnt;
/*
@@ -419,30 +392,19 @@
int tape_head;
int last_tape_head;
- /*
- * Speed control at the tape buffers input/output
- */
+ /* Speed control at the tape buffers input/output */
unsigned long insert_time;
int insert_size;
int insert_speed;
int max_insert_speed;
int measure_insert_time;
- /*
- * Measure tape still time, in milliseconds
- */
- unsigned long tape_still_time_begin;
- int tape_still_time;
-
- /*
- * Speed regulation negative feedback loop
- */
+ /* Speed regulation negative feedback loop */
int speed_control;
int pipeline_head_speed;
int controlled_pipeline_head_speed;
int uncontrolled_pipeline_head_speed;
int controlled_last_pipeline_head;
- int uncontrolled_last_pipeline_head;
unsigned long uncontrolled_pipeline_head_time;
unsigned long controlled_pipeline_head_time;
int controlled_previous_pipeline_head;
@@ -451,18 +413,7 @@
unsigned long uncontrolled_previous_head_time;
int restart_speed_control_req;
- /*
- * Debug_level determines amount of debugging output;
- * can be changed using /proc/ide/hdx/settings
- * 0 : almost no debugging output
- * 1 : 0+output errors only
- * 2 : 1+output all sensekey/asc
- * 3 : 2+follow all chrdev related procedures
- * 4 : 3+follow all procedures
- * 5 : 4+include pc_stack rq_stack info
- * 6 : 5+USE_COUNT updates
- */
- int debug_level;
+ u32 debug_mask;
} idetape_tape_t;
static DEFINE_MUTEX(idetape_ref_mutex);
@@ -495,9 +446,7 @@
mutex_unlock(&idetape_ref_mutex);
}
-/*
- * Tape door status
- */
+/* Tape door status */
#define DOOR_UNLOCKED 0
#define DOOR_LOCKED 1
#define DOOR_EXPLICITLY_LOCKED 2
@@ -517,30 +466,23 @@
/* 0 = no tape is loaded, so we don't rewind after ejecting */
#define IDETAPE_MEDIUM_PRESENT 9
-/*
- * Some defines for the READ BUFFER command
- */
+/* A define for the READ BUFFER command */
#define IDETAPE_RETRIEVE_FAULTY_BLOCK 6
-/*
- * Some defines for the SPACE command
- */
+/* Some defines for the SPACE command */
#define IDETAPE_SPACE_OVER_FILEMARK 1
#define IDETAPE_SPACE_TO_EOD 3
-/*
- * Some defines for the LOAD UNLOAD command
- */
+/* Some defines for the LOAD UNLOAD command */
#define IDETAPE_LU_LOAD_MASK 1
#define IDETAPE_LU_RETENSION_MASK 2
#define IDETAPE_LU_EOT_MASK 4
/*
- * Special requests for our block device strategy routine.
+ * Special requests for our block device strategy routine.
*
- * In order to service a character device command, we add special
- * requests to the tail of our block device request queue and wait
- * for their completion.
+ * In order to service a character device command, we add special requests to
+ * the tail of our block device request queue and wait for their completion.
*/
enum {
@@ -551,55 +493,20 @@
REQ_IDETAPE_READ_BUFFER = (1 << 4),
};
-/*
- * Error codes which are returned in rq->errors to the higher part
- * of the driver.
- */
+/* Error codes returned in rq->errors to the higher part of the driver. */
#define IDETAPE_ERROR_GENERAL 101
#define IDETAPE_ERROR_FILEMARK 102
#define IDETAPE_ERROR_EOD 103
-/*
- * The following is used to format the general configuration word of
- * the ATAPI IDENTIFY DEVICE command.
- */
-struct idetape_id_gcw {
- unsigned packet_size :2; /* Packet Size */
- unsigned reserved234 :3; /* Reserved */
- unsigned drq_type :2; /* Command packet DRQ type */
- unsigned removable :1; /* Removable media */
- unsigned device_type :5; /* Device type */
- unsigned reserved13 :1; /* Reserved */
- unsigned protocol :2; /* Protocol type */
-};
-
-/*
- * READ POSITION packet command - Data Format (From Table 6-57)
- */
-typedef struct {
- unsigned reserved0_10 :2; /* Reserved */
- unsigned bpu :1; /* Block Position Unknown */
- unsigned reserved0_543 :3; /* Reserved */
- unsigned eop :1; /* End Of Partition */
- unsigned bop :1; /* Beginning Of Partition */
- u8 partition; /* Partition Number */
- u8 reserved2, reserved3; /* Reserved */
- u32 first_block; /* First Block Location */
- u32 last_block; /* Last Block Location (Optional) */
- u8 reserved12; /* Reserved */
- u8 blocks_in_buffer[3]; /* Blocks In Buffer - (Optional) */
- u32 bytes_in_buffer; /* Bytes In Buffer (Optional) */
-} idetape_read_position_result_t;
-
/* Structures related to the SELECT SENSE / MODE SENSE packet commands. */
#define IDETAPE_BLOCK_DESCRIPTOR 0
#define IDETAPE_CAPABILITIES_PAGE 0x2a
/*
- * The variables below are used for the character device interface.
- * Additional state variables are defined in our ide_drive_t structure.
+ * The variables below are used for the character device interface. Additional
+ * state variables are defined in our ide_drive_t structure.
*/
-static struct ide_tape_obj * idetape_devs[MAX_HWIFS * MAX_DRIVES];
+static struct ide_tape_obj *idetape_devs[MAX_HWIFS * MAX_DRIVES];
#define ide_tape_f(file) ((file)->private_data)
@@ -616,23 +523,17 @@
}
/*
- * Function declarations
- *
- */
-static int idetape_chrdev_release (struct inode *inode, struct file *filp);
-static void idetape_write_release (ide_drive_t *drive, unsigned int minor);
-
-/*
* Too bad. The drive wants to send us data which we are not ready to accept.
* Just throw it away.
*/
-static void idetape_discard_data (ide_drive_t *drive, unsigned int bcount)
+static void idetape_discard_data(ide_drive_t *drive, unsigned int bcount)
{
while (bcount--)
(void) HWIF(drive)->INB(IDE_DATA_REG);
}
-static void idetape_input_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsigned int bcount)
+static void idetape_input_buffers(ide_drive_t *drive, idetape_pc_t *pc,
+ unsigned int bcount)
{
struct idetape_bh *bh = pc->bh;
int count;
@@ -644,8 +545,11 @@
idetape_discard_data(drive, bcount);
return;
}
- count = min((unsigned int)(bh->b_size - atomic_read(&bh->b_count)), bcount);
- HWIF(drive)->atapi_input_bytes(drive, bh->b_data + atomic_read(&bh->b_count), count);
+ count = min(
+ (unsigned int)(bh->b_size - atomic_read(&bh->b_count)),
+ bcount);
+ HWIF(drive)->atapi_input_bytes(drive, bh->b_data +
+ atomic_read(&bh->b_count), count);
bcount -= count;
atomic_add(count, &bh->b_count);
if (atomic_read(&bh->b_count) == bh->b_size) {
@@ -657,15 +561,16 @@
pc->bh = bh;
}
-static void idetape_output_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsigned int bcount)
+static void idetape_output_buffers(ide_drive_t *drive, idetape_pc_t *pc,
+ unsigned int bcount)
{
struct idetape_bh *bh = pc->bh;
int count;
while (bcount) {
if (bh == NULL) {
- printk(KERN_ERR "ide-tape: bh == NULL in "
- "idetape_output_buffers\n");
+ printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
+ __func__);
return;
}
count = min((unsigned int)pc->b_count, (unsigned int)bcount);
@@ -674,7 +579,8 @@
pc->b_data += count;
pc->b_count -= count;
if (!pc->b_count) {
- pc->bh = bh = bh->b_reqnext;
+ bh = bh->b_reqnext;
+ pc->bh = bh;
if (bh) {
pc->b_data = bh->b_data;
pc->b_count = atomic_read(&bh->b_count);
@@ -683,7 +589,7 @@
}
}
-static void idetape_update_buffers (idetape_pc_t *pc)
+static void idetape_update_buffers(idetape_pc_t *pc)
{
struct idetape_bh *bh = pc->bh;
int count;
@@ -693,8 +599,8 @@
return;
while (bcount) {
if (bh == NULL) {
- printk(KERN_ERR "ide-tape: bh == NULL in "
- "idetape_update_buffers\n");
+ printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
+ __func__);
return;
}
count = min((unsigned int)bh->b_size, (unsigned int)bcount);
@@ -712,17 +618,14 @@
* driver. A storage space for a maximum of IDETAPE_PC_STACK packet
* commands is allocated at initialization time.
*/
-static idetape_pc_t *idetape_next_pc_storage (ide_drive_t *drive)
+static idetape_pc_t *idetape_next_pc_storage(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 5)
- printk(KERN_INFO "ide-tape: pc_stack_index=%d\n",
- tape->pc_stack_index);
-#endif /* IDETAPE_DEBUG_LOG */
+ debug_log(DBG_PCRQ_STACK, "pc_stack_index=%d\n", tape->pc_stack_index);
+
if (tape->pc_stack_index == IDETAPE_PC_STACK)
- tape->pc_stack_index=0;
+ tape->pc_stack_index = 0;
return (&tape->pc_stack[tape->pc_stack_index++]);
}
@@ -731,32 +634,26 @@
* Since we queue packet commands in the request queue, we need to
* allocate a request, along with the allocation of a packet command.
*/
-
+
/**************************************************************
* *
* This should get fixed to use kmalloc(.., GFP_ATOMIC) *
* followed later on by kfree(). -ml *
* *
**************************************************************/
-
-static struct request *idetape_next_rq_storage (ide_drive_t *drive)
+
+static struct request *idetape_next_rq_storage(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 5)
- printk(KERN_INFO "ide-tape: rq_stack_index=%d\n",
- tape->rq_stack_index);
-#endif /* IDETAPE_DEBUG_LOG */
+ debug_log(DBG_PCRQ_STACK, "rq_stack_index=%d\n", tape->rq_stack_index);
+
if (tape->rq_stack_index == IDETAPE_PC_STACK)
- tape->rq_stack_index=0;
+ tape->rq_stack_index = 0;
return (&tape->rq_stack[tape->rq_stack_index++]);
}
-/*
- * idetape_init_pc initializes a packet command.
- */
-static void idetape_init_pc (idetape_pc_t *pc)
+static void idetape_init_pc(idetape_pc_t *pc)
{
memset(pc->c, 0, 12);
pc->retries = 0;
@@ -780,22 +677,14 @@
tape->sense_key = sense[2] & 0xF;
tape->asc = sense[12];
tape->ascq = sense[13];
-#if IDETAPE_DEBUG_LOG
- /*
- * Without debugging, we only log an error if we decided to give up
- * retrying.
- */
- if (tape->debug_level >= 1)
- printk(KERN_INFO "ide-tape: pc = %x, sense key = %x, "
- "asc = %x, ascq = %x\n",
- pc->c[0], tape->sense_key,
- tape->asc, tape->ascq);
-#endif /* IDETAPE_DEBUG_LOG */
+
+ debug_log(DBG_ERR, "pc = %x, sense key = %x, asc = %x, ascq = %x\n",
+ pc->c[0], tape->sense_key, tape->asc, tape->ascq);
/* Correct pc->actually_transferred by asking the tape. */
if (test_bit(PC_DMA_ERROR, &pc->flags)) {
pc->actually_transferred = pc->request_transfer -
- tape->tape_block_size *
+ tape->blk_size *
be32_to_cpu(get_unaligned((u32 *)&sense[3]));
idetape_update_buffers(pc);
}
@@ -843,50 +732,24 @@
idetape_stage_t *stage = tape->next_stage;
struct request *rq = &stage->rq;
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 4)
- printk(KERN_INFO "ide-tape: Reached idetape_active_next_stage\n");
-#endif /* IDETAPE_DEBUG_LOG */
+ debug_log(DBG_PROCS, "Enter %s\n", __func__);
+
if (stage == NULL) {
- printk(KERN_ERR "ide-tape: bug: Trying to activate a non existing stage\n");
+ printk(KERN_ERR "ide-tape: bug: Trying to activate a non"
+ " existing stage\n");
return;
}
rq->rq_disk = tape->disk;
rq->buffer = NULL;
rq->special = (void *)stage->bh;
- tape->active_data_request = rq;
+ tape->active_data_rq = rq;
tape->active_stage = stage;
tape->next_stage = stage->next;
}
-/*
- * idetape_increase_max_pipeline_stages is a part of the feedback
- * loop which tries to find the optimum number of stages. In the
- * feedback loop, we are starting from a minimum maximum number of
- * stages, and if we sense that the pipeline is empty, we try to
- * increase it, until we reach the user compile time memory limit.
- */
-static void idetape_increase_max_pipeline_stages (ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
- int increase = (tape->max_pipeline - tape->min_pipeline) / 10;
-
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 4)
- printk (KERN_INFO "ide-tape: Reached idetape_increase_max_pipeline_stages\n");
-#endif /* IDETAPE_DEBUG_LOG */
-
- tape->max_stages += max(increase, 1);
- tape->max_stages = max(tape->max_stages, tape->min_pipeline);
- tape->max_stages = min(tape->max_stages, tape->max_pipeline);
-}
-
-/*
- * idetape_kfree_stage calls kfree to completely free a stage, along with
- * its related buffers.
- */
-static void __idetape_kfree_stage (idetape_stage_t *stage)
+/* Free a stage along with its related buffers completely. */
+static void __idetape_kfree_stage(idetape_stage_t *stage)
{
struct idetape_bh *prev_bh, *bh = stage->bh;
int size;
@@ -907,30 +770,29 @@
kfree(stage);
}
-static void idetape_kfree_stage (idetape_tape_t *tape, idetape_stage_t *stage)
+static void idetape_kfree_stage(idetape_tape_t *tape, idetape_stage_t *stage)
{
__idetape_kfree_stage(stage);
}
/*
- * idetape_remove_stage_head removes tape->first_stage from the pipeline.
- * The caller should avoid race conditions.
+ * Remove tape->first_stage from the pipeline. The caller should avoid race
+ * conditions.
*/
-static void idetape_remove_stage_head (ide_drive_t *drive)
+static void idetape_remove_stage_head(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
idetape_stage_t *stage;
-
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 4)
- printk(KERN_INFO "ide-tape: Reached idetape_remove_stage_head\n");
-#endif /* IDETAPE_DEBUG_LOG */
+
+ debug_log(DBG_PROCS, "Enter %s\n", __func__);
+
if (tape->first_stage == NULL) {
printk(KERN_ERR "ide-tape: bug: tape->first_stage is NULL\n");
return;
}
if (tape->active_stage == tape->first_stage) {
- printk(KERN_ERR "ide-tape: bug: Trying to free our active pipeline stage\n");
+ printk(KERN_ERR "ide-tape: bug: Trying to free our active "
+ "pipeline stage\n");
return;
}
stage = tape->first_stage;
@@ -940,9 +802,11 @@
if (tape->first_stage == NULL) {
tape->last_stage = NULL;
if (tape->next_stage != NULL)
- printk(KERN_ERR "ide-tape: bug: tape->next_stage != NULL\n");
+ printk(KERN_ERR "ide-tape: bug: tape->next_stage !="
+ " NULL\n");
if (tape->nr_stages)
- printk(KERN_ERR "ide-tape: bug: nr_stages should be 0 now\n");
+ printk(KERN_ERR "ide-tape: bug: nr_stages should be 0 "
+ "now\n");
}
}
@@ -957,10 +821,8 @@
idetape_stage_t *stage = new_last_stage->next;
idetape_stage_t *nstage;
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 4)
- printk(KERN_INFO "ide-tape: %s: idetape_abort_pipeline called\n", tape->name);
-#endif
+ debug_log(DBG_PROCS, "%s: Enter %s\n", tape->name, __func__);
+
while (stage) {
nstage = stage->next;
idetape_kfree_stage(tape, stage);
@@ -975,8 +837,8 @@
}
/*
- * idetape_end_request is used to finish servicing a request, and to
- * insert a pending pipeline request into the main device queue.
+ * Finish servicing a request and insert a pending pipeline request into the
+ * main device queue.
*/
static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
{
@@ -987,15 +849,12 @@
int remove_stage = 0;
idetape_stage_t *active_stage;
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 4)
- printk(KERN_INFO "ide-tape: Reached idetape_end_request\n");
-#endif /* IDETAPE_DEBUG_LOG */
+ debug_log(DBG_PROCS, "Enter %s\n", __func__);
switch (uptodate) {
- case 0: error = IDETAPE_ERROR_GENERAL; break;
- case 1: error = 0; break;
- default: error = uptodate;
+ case 0: error = IDETAPE_ERROR_GENERAL; break;
+ case 1: error = 0; break;
+ default: error = uptodate;
}
rq->errors = error;
if (error)
@@ -1006,20 +865,21 @@
return 0;
}
- spin_lock_irqsave(&tape->spinlock, flags);
+ spin_lock_irqsave(&tape->lock, flags);
/* The request was a pipelined data transfer request */
- if (tape->active_data_request == rq) {
+ if (tape->active_data_rq == rq) {
active_stage = tape->active_stage;
tape->active_stage = NULL;
- tape->active_data_request = NULL;
+ tape->active_data_rq = NULL;
tape->nr_pending_stages--;
if (rq->cmd[0] & REQ_IDETAPE_WRITE) {
remove_stage = 1;
if (error) {
set_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
if (error == IDETAPE_ERROR_EOD)
- idetape_abort_pipeline(drive, active_stage);
+ idetape_abort_pipeline(drive,
+ active_stage);
}
} else if (rq->cmd[0] & REQ_IDETAPE_READ) {
if (error == IDETAPE_ERROR_EOD) {
@@ -1030,48 +890,57 @@
if (tape->next_stage != NULL) {
idetape_activate_next_stage(drive);
- /*
- * Insert the next request into the request queue.
- */
- (void) ide_do_drive_cmd(drive, tape->active_data_request, ide_end);
+ /* Insert the next request into the request queue. */
+ (void)ide_do_drive_cmd(drive, tape->active_data_rq,
+ ide_end);
} else if (!error) {
- idetape_increase_max_pipeline_stages(drive);
+ /*
+ * This is a part of the feedback loop which tries to
+ * find the optimum number of stages. We are starting
+ * from a minimum maximum number of stages, and if we
+ * sense that the pipeline is empty, we try to increase
+ * it, until we reach the user compile time memory
+ * limit.
+ */
+ int i = (tape->max_pipeline - tape->min_pipeline) / 10;
+
+ tape->max_stages += max(i, 1);
+ tape->max_stages = max(tape->max_stages,
+ tape->min_pipeline);
+ tape->max_stages = min(tape->max_stages,
+ tape->max_pipeline);
}
}
ide_end_drive_cmd(drive, 0, 0);
-// blkdev_dequeue_request(rq);
-// drive->rq = NULL;
-// end_that_request_last(rq);
if (remove_stage)
idetape_remove_stage_head(drive);
- if (tape->active_data_request == NULL)
+ if (tape->active_data_rq == NULL)
clear_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags);
- spin_unlock_irqrestore(&tape->spinlock, flags);
+ spin_unlock_irqrestore(&tape->lock, flags);
return 0;
}
-static ide_startstop_t idetape_request_sense_callback (ide_drive_t *drive)
+static ide_startstop_t idetape_request_sense_callback(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 4)
- printk(KERN_INFO "ide-tape: Reached idetape_request_sense_callback\n");
-#endif /* IDETAPE_DEBUG_LOG */
+ debug_log(DBG_PROCS, "Enter %s\n", __func__);
+
if (!tape->pc->error) {
idetape_analyze_error(drive, tape->pc->buffer);
idetape_end_request(drive, 1, 0);
} else {
- printk(KERN_ERR "ide-tape: Error in REQUEST SENSE itself - Aborting request!\n");
+ printk(KERN_ERR "ide-tape: Error in REQUEST SENSE itself - "
+ "Aborting request!\n");
idetape_end_request(drive, 0, 0);
}
return ide_stopped;
}
-static void idetape_create_request_sense_cmd (idetape_pc_t *pc)
+static void idetape_create_request_sense_cmd(idetape_pc_t *pc)
{
- idetape_init_pc(pc);
+ idetape_init_pc(pc);
pc->c[0] = REQUEST_SENSE;
pc->c[4] = 20;
pc->request_transfer = 20;
@@ -1086,25 +955,22 @@
}
/*
- * idetape_queue_pc_head generates a new packet command request in front
- * of the request queue, before the current request, so that it will be
- * processed immediately, on the next pass through the driver.
+ * Generate a new packet command request in front of the request queue, before
+ * the current request, so that it will be processed immediately, on the next
+ * pass through the driver. The function below is called from the request
+ * handling part of the driver (the "bottom" part). Safe storage for the request
+ * should be allocated with ide_tape_next_{pc,rq}_storage() prior to that.
*
- * idetape_queue_pc_head is called from the request handling part of
- * the driver (the "bottom" part). Safe storage for the request should
- * be allocated with idetape_next_pc_storage and idetape_next_rq_storage
- * before calling idetape_queue_pc_head.
+ * Memory for those requests is pre-allocated at initialization time, and is
+ * limited to IDETAPE_PC_STACK requests. We assume that we have enough space for
+ * the maximum possible number of inter-dependent packet commands.
*
- * Memory for those requests is pre-allocated at initialization time, and
- * is limited to IDETAPE_PC_STACK requests. We assume that we have enough
- * space for the maximum possible number of inter-dependent packet commands.
- *
- * The higher level of the driver - The ioctl handler and the character
- * device handling functions should queue request to the lower level part
- * and wait for their completion using idetape_queue_pc_tail or
- * idetape_queue_rw_tail.
+ * The higher level of the driver - The ioctl handler and the character device
+ * handling functions should queue request to the lower level part and wait for
+ * their completion using idetape_queue_pc_tail or idetape_queue_rw_tail.
*/
-static void idetape_queue_pc_head (ide_drive_t *drive, idetape_pc_t *pc,struct request *rq)
+static void idetape_queue_pc_head(ide_drive_t *drive, idetape_pc_t *pc,
+ struct request *rq)
{
struct ide_tape_obj *tape = drive->driver_data;
@@ -1125,7 +991,7 @@
idetape_pc_t *pc;
struct request *rq;
- (void)drive->hwif->INB(IDE_ERROR_REG);
+ (void)ide_read_error(drive);
pc = idetape_next_pc_storage(drive);
rq = idetape_next_rq_storage(drive);
idetape_create_request_sense_cmd(pc);
@@ -1135,50 +1001,46 @@
}
/*
- * idetape_postpone_request postpones the current request so that
- * ide.c will be able to service requests from another device on
- * the same hwgroup while we are polling for DSC.
+ * Postpone the current request so that ide.c will be able to service requests
+ * from another device on the same hwgroup while we are polling for DSC.
*/
-static void idetape_postpone_request (ide_drive_t *drive)
+static void idetape_postpone_request(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 4)
- printk(KERN_INFO "ide-tape: idetape_postpone_request\n");
-#endif
+ debug_log(DBG_PROCS, "Enter %s\n", __func__);
+
tape->postponed_rq = HWGROUP(drive)->rq;
- ide_stall_queue(drive, tape->dsc_polling_frequency);
+ ide_stall_queue(drive, tape->dsc_poll_freq);
}
+typedef void idetape_io_buf(ide_drive_t *, idetape_pc_t *, unsigned int);
+
/*
- * idetape_pc_intr is the usual interrupt handler which will be called
- * during a packet command. We will transfer some of the data (as
- * requested by the drive) and will re-point interrupt handler to us.
- * When data transfer is finished, we will act according to the
- * algorithm described before idetape_issue_packet_command.
- *
+ * This is the usual interrupt handler which will be called during a packet
+ * command. We will transfer some of the data (as requested by the drive) and
+ * will re-point interrupt handler to us. When data transfer is finished, we
+ * will act according to the algorithm described before
+ * idetape_issue_pc.
*/
-static ide_startstop_t idetape_pc_intr (ide_drive_t *drive)
+static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
idetape_tape_t *tape = drive->driver_data;
idetape_pc_t *pc = tape->pc;
+ xfer_func_t *xferfunc;
+ idetape_io_buf *iobuf;
unsigned int temp;
#if SIMULATE_ERRORS
- static int error_sim_count = 0;
+ static int error_sim_count;
#endif
u16 bcount;
u8 stat, ireason;
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 4)
- printk(KERN_INFO "ide-tape: Reached idetape_pc_intr "
- "interrupt handler\n");
-#endif /* IDETAPE_DEBUG_LOG */
+ debug_log(DBG_PROCS, "Enter %s - interrupt handler\n", __func__);
/* Clear the interrupt */
- stat = hwif->INB(IDE_STATUS_REG);
+ stat = ide_read_status(drive);
if (test_bit(PC_DMA_IN_PROGRESS, &pc->flags)) {
if (hwif->ide_dma_end(drive) || (stat & ERR_STAT)) {
@@ -1208,20 +1070,16 @@
pc->actually_transferred = pc->request_transfer;
idetape_update_buffers(pc);
}
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 4)
- printk(KERN_INFO "ide-tape: DMA finished\n");
-#endif /* IDETAPE_DEBUG_LOG */
+ debug_log(DBG_PROCS, "DMA finished\n");
+
}
/* No more interrupts */
if ((stat & DRQ_STAT) == 0) {
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 2)
- printk(KERN_INFO "ide-tape: Packet command completed, %d bytes transferred\n", pc->actually_transferred);
-#endif /* IDETAPE_DEBUG_LOG */
- clear_bit(PC_DMA_IN_PROGRESS, &pc->flags);
+ debug_log(DBG_SENSE, "Packet command completed, %d bytes"
+ " transferred\n", pc->actually_transferred);
+ clear_bit(PC_DMA_IN_PROGRESS, &pc->flags);
local_irq_enable();
#if SIMULATE_ERRORS
@@ -1236,19 +1094,16 @@
stat &= ~ERR_STAT;
if ((stat & ERR_STAT) || test_bit(PC_DMA_ERROR, &pc->flags)) {
/* Error detected */
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 1)
- printk(KERN_INFO "ide-tape: %s: I/O error\n",
- tape->name);
-#endif /* IDETAPE_DEBUG_LOG */
+ debug_log(DBG_ERR, "%s: I/O error\n", tape->name);
+
if (pc->c[0] == REQUEST_SENSE) {
- printk(KERN_ERR "ide-tape: I/O error in request sense command\n");
+ printk(KERN_ERR "ide-tape: I/O error in request"
+ " sense command\n");
return ide_do_reset(drive);
}
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 1)
- printk(KERN_INFO "ide-tape: [cmd %x]: check condition\n", pc->c[0]);
-#endif
+ debug_log(DBG_ERR, "[cmd %x]: check condition\n",
+ pc->c[0]);
+
/* Retry operation */
return idetape_retry_pc(drive);
}
@@ -1257,7 +1112,7 @@
(stat & SEEK_STAT) == 0) {
/* Media access command */
tape->dsc_polling_start = jiffies;
- tape->dsc_polling_frequency = IDETAPE_DSC_MA_FAST;
+ tape->dsc_poll_freq = IDETAPE_DSC_MA_FAST;
tape->dsc_timeout = jiffies + IDETAPE_DSC_MA_TIMEOUT;
/* Allow ide.c to handle other requests */
idetape_postpone_request(drive);
@@ -1282,7 +1137,7 @@
ireason = hwif->INB(IDE_IREASON_REG);
if (ireason & CD) {
- printk(KERN_ERR "ide-tape: CoD != 0 in idetape_pc_intr\n");
+ printk(KERN_ERR "ide-tape: CoD != 0 in %s\n", __func__);
return ide_do_reset(drive);
}
if (((ireason & IO) == IO) == test_bit(PC_WRITING, &pc->flags)) {
@@ -1298,86 +1153,76 @@
temp = pc->actually_transferred + bcount;
if (temp > pc->request_transfer) {
if (temp > pc->buffer_size) {
- printk(KERN_ERR "ide-tape: The tape wants to send us more data than expected - discarding data\n");
+ printk(KERN_ERR "ide-tape: The tape wants to "
+ "send us more data than expected "
+ "- discarding data\n");
idetape_discard_data(drive, bcount);
- ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL);
+ ide_set_handler(drive, &idetape_pc_intr,
+ IDETAPE_WAIT_CMD, NULL);
return ide_started;
}
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 2)
- printk(KERN_NOTICE "ide-tape: The tape wants to send us more data than expected - allowing transfer\n");
-#endif /* IDETAPE_DEBUG_LOG */
+ debug_log(DBG_SENSE, "The tape wants to send us more "
+ "data than expected - allowing transfer\n");
}
- }
- if (test_bit(PC_WRITING, &pc->flags)) {
- if (pc->bh != NULL)
- idetape_output_buffers(drive, pc, bcount);
- else
- /* Write the current buffer */
- hwif->atapi_output_bytes(drive, pc->current_position,
- bcount);
+ iobuf = &idetape_input_buffers;
+ xferfunc = hwif->atapi_input_bytes;
} else {
- if (pc->bh != NULL)
- idetape_input_buffers(drive, pc, bcount);
- else
- /* Read the current buffer */
- hwif->atapi_input_bytes(drive, pc->current_position,
- bcount);
+ iobuf = &idetape_output_buffers;
+ xferfunc = hwif->atapi_output_bytes;
}
+
+ if (pc->bh)
+ iobuf(drive, pc, bcount);
+ else
+ xferfunc(drive, pc->current_position, bcount);
+
/* Update the current position */
pc->actually_transferred += bcount;
pc->current_position += bcount;
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 2)
- printk(KERN_INFO "ide-tape: [cmd %x] transferred %d bytes "
- "on that interrupt\n", pc->c[0], bcount);
-#endif
+
+ debug_log(DBG_SENSE, "[cmd %x] transferred %d bytes on that intr.\n",
+ pc->c[0], bcount);
+
/* And set the interrupt handler again */
ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL);
return ide_started;
}
/*
- * Packet Command Interface
+ * Packet Command Interface
*
- * The current Packet Command is available in tape->pc, and will not
- * change until we finish handling it. Each packet command is associated
- * with a callback function that will be called when the command is
- * finished.
+ * The current Packet Command is available in tape->pc, and will not change
+ * until we finish handling it. Each packet command is associated with a
+ * callback function that will be called when the command is finished.
*
- * The handling will be done in three stages:
+ * The handling will be done in three stages:
*
- * 1. idetape_issue_packet_command will send the packet command to the
- * drive, and will set the interrupt handler to idetape_pc_intr.
+ * 1. idetape_issue_pc will send the packet command to the drive, and will set
+ * the interrupt handler to idetape_pc_intr.
*
- * 2. On each interrupt, idetape_pc_intr will be called. This step
- * will be repeated until the device signals us that no more
- * interrupts will be issued.
+ * 2. On each interrupt, idetape_pc_intr will be called. This step will be
+ * repeated until the device signals us that no more interrupts will be issued.
*
- * 3. ATAPI Tape media access commands have immediate status with a
- * delayed process. In case of a successful initiation of a
- * media access packet command, the DSC bit will be set when the
- * actual execution of the command is finished.
- * Since the tape drive will not issue an interrupt, we have to
- * poll for this event. In this case, we define the request as
- * "low priority request" by setting rq_status to
- * IDETAPE_RQ_POSTPONED, set a timer to poll for DSC and exit
- * the driver.
+ * 3. ATAPI Tape media access commands have immediate status with a delayed
+ * process. In case of a successful initiation of a media access packet command,
+ * the DSC bit will be set when the actual execution of the command is finished.
+ * Since the tape drive will not issue an interrupt, we have to poll for this
+ * event. In this case, we define the request as "low priority request" by
+ * setting rq_status to IDETAPE_RQ_POSTPONED, set a timer to poll for DSC and
+ * exit the driver.
*
- * ide.c will then give higher priority to requests which
- * originate from the other device, until will change rq_status
- * to RQ_ACTIVE.
+ * ide.c will then give higher priority to requests which originate from the
+ * other device, until will change rq_status to RQ_ACTIVE.
*
- * 4. When the packet command is finished, it will be checked for errors.
+ * 4. When the packet command is finished, it will be checked for errors.
*
- * 5. In case an error was found, we queue a request sense packet
- * command in front of the request queue and retry the operation
- * up to IDETAPE_MAX_PC_RETRIES times.
+ * 5. In case an error was found, we queue a request sense packet command in
+ * front of the request queue and retry the operation up to
+ * IDETAPE_MAX_PC_RETRIES times.
*
- * 6. In case no error was found, or we decided to give up and not
- * to retry again, the callback function will be called and then
- * we will handle the next request.
- *
+ * 6. In case no error was found, or we decided to give up and not to retry
+ * again, the callback function will be called and then we will handle the next
+ * request.
*/
static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive)
{
@@ -1388,8 +1233,9 @@
ide_startstop_t startstop;
u8 ireason;
- if (ide_wait_stat(&startstop,drive,DRQ_STAT,BUSY_STAT,WAIT_READY)) {
- printk(KERN_ERR "ide-tape: Strange, packet command initiated yet DRQ isn't asserted\n");
+ if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
+ printk(KERN_ERR "ide-tape: Strange, packet command initiated "
+ "yet DRQ isn't asserted\n");
return startstop;
}
ireason = hwif->INB(IDE_IREASON_REG);
@@ -1422,7 +1268,7 @@
return ide_started;
}
-static ide_startstop_t idetape_issue_packet_command (ide_drive_t *drive, idetape_pc_t *pc)
+static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, idetape_pc_t *pc)
{
ide_hwif_t *hwif = drive->hwif;
idetape_tape_t *tape = drive->driver_data;
@@ -1443,9 +1289,9 @@
if (pc->retries > IDETAPE_MAX_PC_RETRIES ||
test_bit(PC_ABORT, &pc->flags)) {
/*
- * We will "abort" retrying a packet command in case
- * a legitimate error code was received (crossing a
- * filemark, or end of the media, for example).
+ * We will "abort" retrying a packet command in case legitimate
+ * error code was received (crossing a filemark, or end of the
+ * media, for example).
*/
if (!test_bit(PC_ABORT, &pc->flags)) {
if (!(pc->c[0] == TEST_UNIT_READY &&
@@ -1464,10 +1310,7 @@
tape->failed_pc = NULL;
return pc->callback(drive);
}
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 2)
- printk(KERN_INFO "ide-tape: Retry number - %d, cmd = %02X\n", pc->retries, pc->c[0]);
-#endif /* IDETAPE_DEBUG_LOG */
+ debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]);
pc->retries++;
/* We haven't transferred any data yet */
@@ -1499,31 +1342,24 @@
}
}
-/*
- * General packet command callback function.
- */
-static ide_startstop_t idetape_pc_callback (ide_drive_t *drive)
+static ide_startstop_t idetape_pc_callback(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
-
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 4)
- printk(KERN_INFO "ide-tape: Reached idetape_pc_callback\n");
-#endif /* IDETAPE_DEBUG_LOG */
+
+ debug_log(DBG_PROCS, "Enter %s\n", __func__);
idetape_end_request(drive, tape->pc->error ? 0 : 1, 0);
return ide_stopped;
}
-/*
- * A mode sense command is used to "sense" tape parameters.
- */
-static void idetape_create_mode_sense_cmd (idetape_pc_t *pc, u8 page_code)
+/* A mode sense command is used to "sense" tape parameters. */
+static void idetape_create_mode_sense_cmd(idetape_pc_t *pc, u8 page_code)
{
idetape_init_pc(pc);
pc->c[0] = MODE_SENSE;
if (page_code != IDETAPE_BLOCK_DESCRIPTOR)
- pc->c[1] = 8; /* DBD = 1 - Don't return block descriptors */
+ /* DBD = 1 - Don't return block descriptors */
+ pc->c[1] = 8;
pc->c[2] = page_code;
/*
* Changed pc->c[3] to 0 (255 will at best return unused info).
@@ -1533,7 +1369,8 @@
* and return an error when 255 is used.
*/
pc->c[3] = 0;
- pc->c[4] = 255; /* (We will just discard data in that case) */
+ /* We will just discard data in that case */
+ pc->c[4] = 255;
if (page_code == IDETAPE_BLOCK_DESCRIPTOR)
pc->request_transfer = 12;
else if (page_code == IDETAPE_CAPABILITIES_PAGE)
@@ -1543,62 +1380,77 @@
pc->callback = &idetape_pc_callback;
}
-static void calculate_speeds(ide_drive_t *drive)
+static void idetape_calculate_speeds(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
- int full = 125, empty = 75;
- if (time_after(jiffies, tape->controlled_pipeline_head_time + 120 * HZ)) {
- tape->controlled_previous_pipeline_head = tape->controlled_last_pipeline_head;
- tape->controlled_previous_head_time = tape->controlled_pipeline_head_time;
+ if (time_after(jiffies,
+ tape->controlled_pipeline_head_time + 120 * HZ)) {
+ tape->controlled_previous_pipeline_head =
+ tape->controlled_last_pipeline_head;
+ tape->controlled_previous_head_time =
+ tape->controlled_pipeline_head_time;
tape->controlled_last_pipeline_head = tape->pipeline_head;
tape->controlled_pipeline_head_time = jiffies;
}
if (time_after(jiffies, tape->controlled_pipeline_head_time + 60 * HZ))
- tape->controlled_pipeline_head_speed = (tape->pipeline_head - tape->controlled_last_pipeline_head) * 32 * HZ / (jiffies - tape->controlled_pipeline_head_time);
+ tape->controlled_pipeline_head_speed = (tape->pipeline_head -
+ tape->controlled_last_pipeline_head) * 32 * HZ /
+ (jiffies - tape->controlled_pipeline_head_time);
else if (time_after(jiffies, tape->controlled_previous_head_time))
- tape->controlled_pipeline_head_speed = (tape->pipeline_head - tape->controlled_previous_pipeline_head) * 32 * HZ / (jiffies - tape->controlled_previous_head_time);
+ tape->controlled_pipeline_head_speed = (tape->pipeline_head -
+ tape->controlled_previous_pipeline_head) * 32 *
+ HZ / (jiffies - tape->controlled_previous_head_time);
- if (tape->nr_pending_stages < tape->max_stages /*- 1 */) {
+ if (tape->nr_pending_stages < tape->max_stages/*- 1 */) {
/* -1 for read mode error recovery */
- if (time_after(jiffies, tape->uncontrolled_previous_head_time + 10 * HZ)) {
+ if (time_after(jiffies, tape->uncontrolled_previous_head_time +
+ 10 * HZ)) {
tape->uncontrolled_pipeline_head_time = jiffies;
- tape->uncontrolled_pipeline_head_speed = (tape->pipeline_head - tape->uncontrolled_previous_pipeline_head) * 32 * HZ / (jiffies - tape->uncontrolled_previous_head_time);
+ tape->uncontrolled_pipeline_head_speed =
+ (tape->pipeline_head -
+ tape->uncontrolled_previous_pipeline_head) *
+ 32 * HZ / (jiffies -
+ tape->uncontrolled_previous_head_time);
}
} else {
tape->uncontrolled_previous_head_time = jiffies;
tape->uncontrolled_previous_pipeline_head = tape->pipeline_head;
- if (time_after(jiffies, tape->uncontrolled_pipeline_head_time + 30 * HZ)) {
+ if (time_after(jiffies, tape->uncontrolled_pipeline_head_time +
+ 30 * HZ))
tape->uncontrolled_pipeline_head_time = jiffies;
- }
+
}
- tape->pipeline_head_speed = max(tape->uncontrolled_pipeline_head_speed, tape->controlled_pipeline_head_speed);
- if (tape->speed_control == 0) {
- tape->max_insert_speed = 5000;
- } else if (tape->speed_control == 1) {
+ tape->pipeline_head_speed = max(tape->uncontrolled_pipeline_head_speed,
+ tape->controlled_pipeline_head_speed);
+
+ if (tape->speed_control == 1) {
if (tape->nr_pending_stages >= tape->max_stages / 2)
tape->max_insert_speed = tape->pipeline_head_speed +
- (1100 - tape->pipeline_head_speed) * 2 * (tape->nr_pending_stages - tape->max_stages / 2) / tape->max_stages;
+ (1100 - tape->pipeline_head_speed) * 2 *
+ (tape->nr_pending_stages - tape->max_stages / 2)
+ / tape->max_stages;
else
tape->max_insert_speed = 500 +
- (tape->pipeline_head_speed - 500) * 2 * tape->nr_pending_stages / tape->max_stages;
+ (tape->pipeline_head_speed - 500) * 2 *
+ tape->nr_pending_stages / tape->max_stages;
+
if (tape->nr_pending_stages >= tape->max_stages * 99 / 100)
tape->max_insert_speed = 5000;
- } else if (tape->speed_control == 2) {
- tape->max_insert_speed = tape->pipeline_head_speed * empty / 100 +
- (tape->pipeline_head_speed * full / 100 - tape->pipeline_head_speed * empty / 100) * tape->nr_pending_stages / tape->max_stages;
} else
tape->max_insert_speed = tape->speed_control;
+
tape->max_insert_speed = max(tape->max_insert_speed, 500);
}
-static ide_startstop_t idetape_media_access_finished (ide_drive_t *drive)
+static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
idetape_pc_t *pc = tape->pc;
u8 stat;
- stat = drive->hwif->INB(IDE_STATUS_REG);
+ stat = ide_read_status(drive);
+
if (stat & SEEK_STAT) {
if (stat & ERR_STAT) {
/* Error detected */
@@ -1618,14 +1470,14 @@
return pc->callback(drive);
}
-static ide_startstop_t idetape_rw_callback (ide_drive_t *drive)
+static ide_startstop_t idetape_rw_callback(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
struct request *rq = HWGROUP(drive)->rq;
- int blocks = tape->pc->actually_transferred / tape->tape_block_size;
+ int blocks = tape->pc->actually_transferred / tape->blk_size;
- tape->avg_size += blocks * tape->tape_block_size;
- tape->insert_size += blocks * tape->tape_block_size;
+ tape->avg_size += blocks * tape->blk_size;
+ tape->insert_size += blocks * tape->blk_size;
if (tape->insert_size > 1024 * 1024)
tape->measure_insert_time = 1;
if (tape->measure_insert_time) {
@@ -1634,19 +1486,17 @@
tape->insert_size = 0;
}
if (time_after(jiffies, tape->insert_time))
- tape->insert_speed = tape->insert_size / 1024 * HZ / (jiffies - tape->insert_time);
+ tape->insert_speed = tape->insert_size / 1024 * HZ /
+ (jiffies - tape->insert_time);
if (time_after_eq(jiffies, tape->avg_time + HZ)) {
- tape->avg_speed = tape->avg_size * HZ / (jiffies - tape->avg_time) / 1024;
+ tape->avg_speed = tape->avg_size * HZ /
+ (jiffies - tape->avg_time) / 1024;
tape->avg_size = 0;
tape->avg_time = jiffies;
}
+ debug_log(DBG_PROCS, "Enter %s\n", __func__);
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 4)
- printk(KERN_INFO "ide-tape: Reached idetape_rw_callback\n");
-#endif /* IDETAPE_DEBUG_LOG */
-
- tape->first_frame_position += blocks;
+ tape->first_frame += blocks;
rq->current_nr_sectors -= blocks;
if (!tape->pc->error)
@@ -1656,7 +1506,8 @@
return ide_stopped;
}
-static void idetape_create_read_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsigned int length, struct idetape_bh *bh)
+static void idetape_create_read_cmd(idetape_tape_t *tape, idetape_pc_t *pc,
+ unsigned int length, struct idetape_bh *bh)
{
idetape_init_pc(pc);
pc->c[0] = READ_6;
@@ -1666,12 +1517,14 @@
pc->bh = bh;
atomic_set(&bh->b_count, 0);
pc->buffer = NULL;
- pc->request_transfer = pc->buffer_size = length * tape->tape_block_size;
+ pc->buffer_size = length * tape->blk_size;
+ pc->request_transfer = pc->buffer_size;
if (pc->request_transfer == tape->stage_size)
set_bit(PC_DMA_RECOMMENDED, &pc->flags);
}
-static void idetape_create_read_buffer_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsigned int length, struct idetape_bh *bh)
+static void idetape_create_read_buffer_cmd(idetape_tape_t *tape,
+ idetape_pc_t *pc, struct idetape_bh *bh)
{
int size = 32768;
struct idetape_bh *p = bh;
@@ -1689,10 +1542,12 @@
atomic_set(&p->b_count, 0);
p = p->b_reqnext;
}
- pc->request_transfer = pc->buffer_size = size;
+ pc->request_transfer = size;
+ pc->buffer_size = size;
}
-static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsigned int length, struct idetape_bh *bh)
+static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc,
+ unsigned int length, struct idetape_bh *bh)
{
idetape_init_pc(pc);
pc->c[0] = WRITE_6;
@@ -1704,14 +1559,12 @@
pc->b_data = bh->b_data;
pc->b_count = atomic_read(&bh->b_count);
pc->buffer = NULL;
- pc->request_transfer = pc->buffer_size = length * tape->tape_block_size;
+ pc->buffer_size = length * tape->blk_size;
+ pc->request_transfer = pc->buffer_size;
if (pc->request_transfer == tape->stage_size)
set_bit(PC_DMA_RECOMMENDED, &pc->flags);
}
-/*
- * idetape_do_request is our request handling function.
- */
static ide_startstop_t idetape_do_request(ide_drive_t *drive,
struct request *rq, sector_t block)
{
@@ -1720,30 +1573,22 @@
struct request *postponed_rq = tape->postponed_rq;
u8 stat;
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 2)
- printk(KERN_INFO "ide-tape: sector: %ld, "
- "nr_sectors: %ld, current_nr_sectors: %d\n",
+ debug_log(DBG_SENSE, "sector: %ld, nr_sectors: %ld,"
+ " current_nr_sectors: %d\n",
rq->sector, rq->nr_sectors, rq->current_nr_sectors);
-#endif /* IDETAPE_DEBUG_LOG */
if (!blk_special_request(rq)) {
- /*
- * We do not support buffer cache originated requests.
- */
+ /* We do not support buffer cache originated requests. */
printk(KERN_NOTICE "ide-tape: %s: Unsupported request in "
"request queue (%d)\n", drive->name, rq->cmd_type);
ide_end_request(drive, 0, 0);
return ide_stopped;
}
- /*
- * Retry a failed packet command
- */
- if (tape->failed_pc != NULL &&
- tape->pc->c[0] == REQUEST_SENSE) {
- return idetape_issue_packet_command(drive, tape->failed_pc);
- }
+ /* Retry a failed packet command */
+ if (tape->failed_pc && tape->pc->c[0] == REQUEST_SENSE)
+ return idetape_issue_pc(drive, tape->failed_pc);
+
if (postponed_rq != NULL)
if (rq != postponed_rq) {
printk(KERN_ERR "ide-tape: ide-tape.c bug - "
@@ -1758,7 +1603,7 @@
* If the tape is still busy, postpone our request and service
* the other device meanwhile.
*/
- stat = drive->hwif->INB(IDE_STATUS_REG);
+ stat = ide_read_status(drive);
if (!drive->dsc_overlap && !(rq->cmd[0] & REQ_IDETAPE_PC2))
set_bit(IDETAPE_IGNORE_DSC, &tape->flags);
@@ -1768,16 +1613,15 @@
drive->post_reset = 0;
}
- if (tape->tape_still_time > 100 && tape->tape_still_time < 200)
- tape->measure_insert_time = 1;
if (time_after(jiffies, tape->insert_time))
- tape->insert_speed = tape->insert_size / 1024 * HZ / (jiffies - tape->insert_time);
- calculate_speeds(drive);
+ tape->insert_speed = tape->insert_size / 1024 * HZ /
+ (jiffies - tape->insert_time);
+ idetape_calculate_speeds(drive);
if (!test_and_clear_bit(IDETAPE_IGNORE_DSC, &tape->flags) &&
(stat & SEEK_STAT) == 0) {
if (postponed_rq == NULL) {
tape->dsc_polling_start = jiffies;
- tape->dsc_polling_frequency = tape->best_dsc_rw_frequency;
+ tape->dsc_poll_freq = tape->best_dsc_rw_freq;
tape->dsc_timeout = jiffies + IDETAPE_DSC_RW_TIMEOUT;
} else if (time_after(jiffies, tape->dsc_timeout)) {
printk(KERN_ERR "ide-tape: %s: DSC timeout\n",
@@ -1788,8 +1632,10 @@
} else {
return ide_do_reset(drive);
}
- } else if (time_after(jiffies, tape->dsc_polling_start + IDETAPE_DSC_MA_THRESHOLD))
- tape->dsc_polling_frequency = IDETAPE_DSC_MA_SLOW;
+ } else if (time_after(jiffies,
+ tape->dsc_polling_start +
+ IDETAPE_DSC_MA_THRESHOLD))
+ tape->dsc_poll_freq = IDETAPE_DSC_MA_SLOW;
idetape_postpone_request(drive);
return ide_stopped;
}
@@ -1797,20 +1643,23 @@
tape->buffer_head++;
tape->postpone_cnt = 0;
pc = idetape_next_pc_storage(drive);
- idetape_create_read_cmd(tape, pc, rq->current_nr_sectors, (struct idetape_bh *)rq->special);
+ idetape_create_read_cmd(tape, pc, rq->current_nr_sectors,
+ (struct idetape_bh *)rq->special);
goto out;
}
if (rq->cmd[0] & REQ_IDETAPE_WRITE) {
tape->buffer_head++;
tape->postpone_cnt = 0;
pc = idetape_next_pc_storage(drive);
- idetape_create_write_cmd(tape, pc, rq->current_nr_sectors, (struct idetape_bh *)rq->special);
+ idetape_create_write_cmd(tape, pc, rq->current_nr_sectors,
+ (struct idetape_bh *)rq->special);
goto out;
}
if (rq->cmd[0] & REQ_IDETAPE_READ_BUFFER) {
tape->postpone_cnt = 0;
pc = idetape_next_pc_storage(drive);
- idetape_create_read_buffer_cmd(tape, pc, rq->current_nr_sectors, (struct idetape_bh *)rq->special);
+ idetape_create_read_buffer_cmd(tape, pc,
+ (struct idetape_bh *)rq->special);
goto out;
}
if (rq->cmd[0] & REQ_IDETAPE_PC1) {
@@ -1825,49 +1674,51 @@
}
BUG();
out:
- return idetape_issue_packet_command(drive, pc);
+ return idetape_issue_pc(drive, pc);
}
-/*
- * Pipeline related functions
- */
-static inline int idetape_pipeline_active (idetape_tape_t *tape)
+/* Pipeline related functions */
+static inline int idetape_pipeline_active(idetape_tape_t *tape)
{
int rc1, rc2;
rc1 = test_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags);
- rc2 = (tape->active_data_request != NULL);
+ rc2 = (tape->active_data_rq != NULL);
return rc1;
}
/*
- * idetape_kmalloc_stage uses __get_free_page to allocate a pipeline
- * stage, along with all the necessary small buffers which together make
- * a buffer of size tape->stage_size (or a bit more). We attempt to
- * combine sequential pages as much as possible.
+ * The function below uses __get_free_page to allocate a pipeline stage, along
+ * with all the necessary small buffers which together make a buffer of size
+ * tape->stage_size (or a bit more). We attempt to combine sequential pages as
+ * much as possible.
*
- * Returns a pointer to the new allocated stage, or NULL if we
- * can't (or don't want to) allocate a stage.
+ * It returns a pointer to the new allocated stage, or NULL if we can't (or
+ * don't want to) allocate a stage.
*
- * Pipeline stages are optional and are used to increase performance.
- * If we can't allocate them, we'll manage without them.
+ * Pipeline stages are optional and are used to increase performance. If we
+ * can't allocate them, we'll manage without them.
*/
-static idetape_stage_t *__idetape_kmalloc_stage (idetape_tape_t *tape, int full, int clear)
+static idetape_stage_t *__idetape_kmalloc_stage(idetape_tape_t *tape, int full,
+ int clear)
{
idetape_stage_t *stage;
struct idetape_bh *prev_bh, *bh;
int pages = tape->pages_per_stage;
char *b_data = NULL;
- if ((stage = kmalloc(sizeof (idetape_stage_t),GFP_KERNEL)) == NULL)
+ stage = kmalloc(sizeof(idetape_stage_t), GFP_KERNEL);
+ if (!stage)
return NULL;
stage->next = NULL;
- bh = stage->bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL);
+ stage->bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL);
+ bh = stage->bh;
if (bh == NULL)
goto abort;
bh->b_reqnext = NULL;
- if ((bh->b_data = (char *) __get_free_page (GFP_KERNEL)) == NULL)
+ bh->b_data = (char *) __get_free_page(GFP_KERNEL);
+ if (!bh->b_data)
goto abort;
if (clear)
memset(bh->b_data, 0, PAGE_SIZE);
@@ -1875,7 +1726,8 @@
atomic_set(&bh->b_count, full ? bh->b_size : 0);
while (--pages) {
- if ((b_data = (char *) __get_free_page (GFP_KERNEL)) == NULL)
+ b_data = (char *) __get_free_page(GFP_KERNEL);
+ if (!b_data)
goto abort;
if (clear)
memset(b_data, 0, PAGE_SIZE);
@@ -1893,7 +1745,8 @@
continue;
}
prev_bh = bh;
- if ((bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL)) == NULL) {
+ bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL);
+ if (!bh) {
free_page((unsigned long) b_data);
goto abort;
}
@@ -1912,14 +1765,11 @@
return NULL;
}
-static idetape_stage_t *idetape_kmalloc_stage (idetape_tape_t *tape)
+static idetape_stage_t *idetape_kmalloc_stage(idetape_tape_t *tape)
{
idetape_stage_t *cache_stage = tape->cache_stage;
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 4)
- printk(KERN_INFO "ide-tape: Reached idetape_kmalloc_stage\n");
-#endif /* IDETAPE_DEBUG_LOG */
+ debug_log(DBG_PROCS, "Enter %s\n", __func__);
if (tape->nr_stages >= tape->max_stages)
return NULL;
@@ -1930,7 +1780,8 @@
return __idetape_kmalloc_stage(tape, 0, 0);
}
-static int idetape_copy_stage_from_user (idetape_tape_t *tape, idetape_stage_t *stage, const char __user *buf, int n)
+static int idetape_copy_stage_from_user(idetape_tape_t *tape,
+ idetape_stage_t *stage, const char __user *buf, int n)
{
struct idetape_bh *bh = tape->bh;
int count;
@@ -1938,12 +1789,15 @@
while (n) {
if (bh == NULL) {
- printk(KERN_ERR "ide-tape: bh == NULL in "
- "idetape_copy_stage_from_user\n");
+ printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
+ __func__);
return 1;
}
- count = min((unsigned int)(bh->b_size - atomic_read(&bh->b_count)), (unsigned int)n);
- if (copy_from_user(bh->b_data + atomic_read(&bh->b_count), buf, count))
+ count = min((unsigned int)
+ (bh->b_size - atomic_read(&bh->b_count)),
+ (unsigned int)n);
+ if (copy_from_user(bh->b_data + atomic_read(&bh->b_count), buf,
+ count))
ret = 1;
n -= count;
atomic_add(count, &bh->b_count);
@@ -1958,7 +1812,8 @@
return ret;
}
-static int idetape_copy_stage_to_user (idetape_tape_t *tape, char __user *buf, idetape_stage_t *stage, int n)
+static int idetape_copy_stage_to_user(idetape_tape_t *tape, char __user *buf,
+ idetape_stage_t *stage, int n)
{
struct idetape_bh *bh = tape->bh;
int count;
@@ -1966,8 +1821,8 @@
while (n) {
if (bh == NULL) {
- printk(KERN_ERR "ide-tape: bh == NULL in "
- "idetape_copy_stage_to_user\n");
+ printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
+ __func__);
return 1;
}
count = min(tape->b_count, n);
@@ -1978,7 +1833,8 @@
tape->b_count -= count;
buf += count;
if (!tape->b_count) {
- tape->bh = bh = bh->b_reqnext;
+ bh = bh->b_reqnext;
+ tape->bh = bh;
if (bh) {
tape->b_data = bh->b_data;
tape->b_count = atomic_read(&bh->b_count);
@@ -1988,12 +1844,12 @@
return ret;
}
-static void idetape_init_merge_stage (idetape_tape_t *tape)
+static void idetape_init_merge_stage(idetape_tape_t *tape)
{
struct idetape_bh *bh = tape->merge_stage->bh;
-
+
tape->bh = bh;
- if (tape->chrdev_direction == idetape_direction_write)
+ if (tape->chrdev_dir == IDETAPE_DIR_WRITE)
atomic_set(&bh->b_count, 0);
else {
tape->b_data = bh->b_data;
@@ -2001,7 +1857,7 @@
}
}
-static void idetape_switch_buffers (idetape_tape_t *tape, idetape_stage_t *stage)
+static void idetape_switch_buffers(idetape_tape_t *tape, idetape_stage_t *stage)
{
struct idetape_bh *tmp;
@@ -2011,87 +1867,76 @@
idetape_init_merge_stage(tape);
}
-/*
- * idetape_add_stage_tail adds a new stage at the end of the pipeline.
- */
-static void idetape_add_stage_tail (ide_drive_t *drive,idetape_stage_t *stage)
+/* Add a new stage at the end of the pipeline. */
+static void idetape_add_stage_tail(ide_drive_t *drive, idetape_stage_t *stage)
{
idetape_tape_t *tape = drive->driver_data;
unsigned long flags;
-
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 4)
- printk (KERN_INFO "ide-tape: Reached idetape_add_stage_tail\n");
-#endif /* IDETAPE_DEBUG_LOG */
- spin_lock_irqsave(&tape->spinlock, flags);
+
+ debug_log(DBG_PROCS, "Enter %s\n", __func__);
+
+ spin_lock_irqsave(&tape->lock, flags);
stage->next = NULL;
if (tape->last_stage != NULL)
- tape->last_stage->next=stage;
+ tape->last_stage->next = stage;
else
- tape->first_stage = tape->next_stage=stage;
+ tape->first_stage = stage;
+ tape->next_stage = stage;
tape->last_stage = stage;
if (tape->next_stage == NULL)
tape->next_stage = tape->last_stage;
tape->nr_stages++;
tape->nr_pending_stages++;
- spin_unlock_irqrestore(&tape->spinlock, flags);
+ spin_unlock_irqrestore(&tape->lock, flags);
}
-/*
- * idetape_wait_for_request installs a completion in a pending request
- * and sleeps until it is serviced.
- *
- * The caller should ensure that the request will not be serviced
- * before we install the completion (usually by disabling interrupts).
+/* Install a completion in a pending request and sleep until it is serviced. The
+ * caller should ensure that the request will not be serviced before we install
+ * the completion (usually by disabling interrupts).
*/
-static void idetape_wait_for_request (ide_drive_t *drive, struct request *rq)
+static void idetape_wait_for_request(ide_drive_t *drive, struct request *rq)
{
DECLARE_COMPLETION_ONSTACK(wait);
idetape_tape_t *tape = drive->driver_data;
if (rq == NULL || !blk_special_request(rq)) {
- printk (KERN_ERR "ide-tape: bug: Trying to sleep on non-valid request\n");
+ printk(KERN_ERR "ide-tape: bug: Trying to sleep on non-valid"
+ " request\n");
return;
}
rq->end_io_data = &wait;
rq->end_io = blk_end_sync_rq;
- spin_unlock_irq(&tape->spinlock);
+ spin_unlock_irq(&tape->lock);
wait_for_completion(&wait);
/* The stage and its struct request have been deallocated */
- spin_lock_irq(&tape->spinlock);
+ spin_lock_irq(&tape->lock);
}
-static ide_startstop_t idetape_read_position_callback (ide_drive_t *drive)
+static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
- idetape_read_position_result_t *result;
-
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 4)
- printk(KERN_INFO "ide-tape: Reached idetape_read_position_callback\n");
-#endif /* IDETAPE_DEBUG_LOG */
+ u8 *readpos = tape->pc->buffer;
+
+ debug_log(DBG_PROCS, "Enter %s\n", __func__);
if (!tape->pc->error) {
- result = (idetape_read_position_result_t *) tape->pc->buffer;
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 2)
- printk(KERN_INFO "ide-tape: BOP - %s\n",result->bop ? "Yes":"No");
- if (tape->debug_level >= 2)
- printk(KERN_INFO "ide-tape: EOP - %s\n",result->eop ? "Yes":"No");
-#endif /* IDETAPE_DEBUG_LOG */
- if (result->bpu) {
- printk(KERN_INFO "ide-tape: Block location is unknown to the tape\n");
+ debug_log(DBG_SENSE, "BOP - %s\n",
+ (readpos[0] & 0x80) ? "Yes" : "No");
+ debug_log(DBG_SENSE, "EOP - %s\n",
+ (readpos[0] & 0x40) ? "Yes" : "No");
+
+ if (readpos[0] & 0x4) {
+ printk(KERN_INFO "ide-tape: Block location is unknown"
+ "to the tape\n");
clear_bit(IDETAPE_ADDRESS_VALID, &tape->flags);
idetape_end_request(drive, 0, 0);
} else {
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 2)
- printk(KERN_INFO "ide-tape: Block Location - %u\n", ntohl(result->first_block));
-#endif /* IDETAPE_DEBUG_LOG */
- tape->partition = result->partition;
- tape->first_frame_position = ntohl(result->first_block);
- tape->last_frame_position = ntohl(result->last_block);
- tape->blocks_in_buffer = result->blocks_in_buffer[2];
+ debug_log(DBG_SENSE, "Block Location - %u\n",
+ be32_to_cpu(*(u32 *)&readpos[4]));
+
+ tape->partition = readpos[1];
+ tape->first_frame =
+ be32_to_cpu(*(u32 *)&readpos[4]);
set_bit(IDETAPE_ADDRESS_VALID, &tape->flags);
idetape_end_request(drive, 1, 0);
}
@@ -2102,14 +1947,11 @@
}
/*
- * idetape_create_write_filemark_cmd will:
- *
- * 1. Write a filemark if write_filemark=1.
- * 2. Flush the device buffers without writing a filemark
- * if write_filemark=0.
- *
+ * Write a filemark if write_filemark=1. Flush the device buffers without
+ * writing a filemark otherwise.
*/
-static void idetape_create_write_filemark_cmd (ide_drive_t *drive, idetape_pc_t *pc,int write_filemark)
+static void idetape_create_write_filemark_cmd(ide_drive_t *drive,
+ idetape_pc_t *pc, int write_filemark)
{
idetape_init_pc(pc);
pc->c[0] = WRITE_FILEMARKS;
@@ -2126,26 +1968,19 @@
}
/*
- * idetape_queue_pc_tail is based on the following functions:
+ * We add a special packet command request to the tail of the request queue, and
+ * wait for it to be serviced. This is not to be called from within the request
+ * handling part of the driver! We allocate here data on the stack and it is
+ * valid until the request is finished. This is not the case for the bottom part
+ * of the driver, where we are always leaving the functions to wait for an
+ * interrupt or a timer event.
*
- * ide_do_drive_cmd from ide.c
- * cdrom_queue_request and cdrom_queue_packet_command from ide-cd.c
- *
- * We add a special packet command request to the tail of the request
- * queue, and wait for it to be serviced.
- *
- * This is not to be called from within the request handling part
- * of the driver ! We allocate here data in the stack, and it is valid
- * until the request is finished. This is not the case for the bottom
- * part of the driver, where we are always leaving the functions to wait
- * for an interrupt or a timer event.
- *
- * From the bottom part of the driver, we should allocate safe memory
- * using idetape_next_pc_storage and idetape_next_rq_storage, and add
- * the request to the request list without waiting for it to be serviced !
- * In that case, we usually use idetape_queue_pc_head.
+ * From the bottom part of the driver, we should allocate safe memory using
+ * idetape_next_pc_storage() and ide_tape_next_rq_storage(), and add the request
+ * to the request list without waiting for it to be serviced! In that case, we
+ * usually use idetape_queue_pc_head().
*/
-static int __idetape_queue_pc_tail (ide_drive_t *drive, idetape_pc_t *pc)
+static int __idetape_queue_pc_tail(ide_drive_t *drive, idetape_pc_t *pc)
{
struct ide_tape_obj *tape = drive->driver_data;
struct request rq;
@@ -2156,7 +1991,8 @@
return ide_do_drive_cmd(drive, &rq, ide_wait);
}
-static void idetape_create_load_unload_cmd (ide_drive_t *drive, idetape_pc_t *pc,int cmd)
+static void idetape_create_load_unload_cmd(ide_drive_t *drive, idetape_pc_t *pc,
+ int cmd)
{
idetape_init_pc(pc);
pc->c[0] = START_STOP;
@@ -2171,9 +2007,7 @@
idetape_pc_t pc;
int load_attempted = 0;
- /*
- * Wait for the tape to become ready
- */
+ /* Wait for the tape to become ready */
set_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags);
timeout += jiffies;
while (time_before(jiffies, timeout)) {
@@ -2181,10 +2015,12 @@
if (!__idetape_queue_pc_tail(drive, &pc))
return 0;
if ((tape->sense_key == 2 && tape->asc == 4 && tape->ascq == 2)
- || (tape->asc == 0x3A)) { /* no media */
+ || (tape->asc == 0x3A)) {
+ /* no media */
if (load_attempted)
return -ENOMEDIUM;
- idetape_create_load_unload_cmd(drive, &pc, IDETAPE_LU_LOAD_MASK);
+ idetape_create_load_unload_cmd(drive, &pc,
+ IDETAPE_LU_LOAD_MASK);
__idetape_queue_pc_tail(drive, &pc);
load_attempted = 1;
/* not about to be ready */
@@ -2196,24 +2032,25 @@
return -EIO;
}
-static int idetape_queue_pc_tail (ide_drive_t *drive,idetape_pc_t *pc)
+static int idetape_queue_pc_tail(ide_drive_t *drive, idetape_pc_t *pc)
{
return __idetape_queue_pc_tail(drive, pc);
}
-static int idetape_flush_tape_buffers (ide_drive_t *drive)
+static int idetape_flush_tape_buffers(ide_drive_t *drive)
{
idetape_pc_t pc;
int rc;
idetape_create_write_filemark_cmd(drive, &pc, 0);
- if ((rc = idetape_queue_pc_tail(drive, &pc)))
+ rc = idetape_queue_pc_tail(drive, &pc);
+ if (rc)
return rc;
idetape_wait_ready(drive, 60 * 5 * HZ);
return 0;
}
-static void idetape_create_read_position_cmd (idetape_pc_t *pc)
+static void idetape_create_read_position_cmd(idetape_pc_t *pc)
{
idetape_init_pc(pc);
pc->c[0] = READ_POSITION;
@@ -2221,25 +2058,23 @@
pc->callback = &idetape_read_position_callback;
}
-static int idetape_read_position (ide_drive_t *drive)
+static int idetape_read_position(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
idetape_pc_t pc;
int position;
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 4)
- printk(KERN_INFO "ide-tape: Reached idetape_read_position\n");
-#endif /* IDETAPE_DEBUG_LOG */
+ debug_log(DBG_PROCS, "Enter %s\n", __func__);
idetape_create_read_position_cmd(&pc);
if (idetape_queue_pc_tail(drive, &pc))
return -1;
- position = tape->first_frame_position;
+ position = tape->first_frame;
return position;
}
-static void idetape_create_locate_cmd (ide_drive_t *drive, idetape_pc_t *pc, unsigned int block, u8 partition, int skip)
+static void idetape_create_locate_cmd(ide_drive_t *drive, idetape_pc_t *pc,
+ unsigned int block, u8 partition, int skip)
{
idetape_init_pc(pc);
pc->c[0] = POSITION_TO_ELEMENT;
@@ -2250,7 +2085,8 @@
pc->callback = &idetape_pc_callback;
}
-static int idetape_create_prevent_cmd (ide_drive_t *drive, idetape_pc_t *pc, int prevent)
+static int idetape_create_prevent_cmd(ide_drive_t *drive, idetape_pc_t *pc,
+ int prevent)
{
idetape_tape_t *tape = drive->driver_data;
@@ -2265,17 +2101,17 @@
return 1;
}
-static int __idetape_discard_read_pipeline (ide_drive_t *drive)
+static int __idetape_discard_read_pipeline(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
unsigned long flags;
int cnt;
- if (tape->chrdev_direction != idetape_direction_read)
+ if (tape->chrdev_dir != IDETAPE_DIR_READ)
return 0;
/* Remove merge stage. */
- cnt = tape->merge_stage_size / tape->tape_block_size;
+ cnt = tape->merge_stage_size / tape->blk_size;
if (test_and_clear_bit(IDETAPE_FILEMARK, &tape->flags))
++cnt; /* Filemarks count as 1 sector */
tape->merge_stage_size = 0;
@@ -2286,22 +2122,22 @@
/* Clear pipeline flags. */
clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
- tape->chrdev_direction = idetape_direction_none;
+ tape->chrdev_dir = IDETAPE_DIR_NONE;
/* Remove pipeline stages. */
if (tape->first_stage == NULL)
return 0;
- spin_lock_irqsave(&tape->spinlock, flags);
+ spin_lock_irqsave(&tape->lock, flags);
tape->next_stage = NULL;
if (idetape_pipeline_active(tape))
- idetape_wait_for_request(drive, tape->active_data_request);
- spin_unlock_irqrestore(&tape->spinlock, flags);
+ idetape_wait_for_request(drive, tape->active_data_rq);
+ spin_unlock_irqrestore(&tape->lock, flags);
while (tape->first_stage != NULL) {
struct request *rq_ptr = &tape->first_stage->rq;
- cnt += rq_ptr->nr_sectors - rq_ptr->current_nr_sectors;
+ cnt += rq_ptr->nr_sectors - rq_ptr->current_nr_sectors;
if (rq_ptr->errors == IDETAPE_ERROR_FILEMARK)
++cnt;
idetape_remove_stage_head(drive);
@@ -2312,21 +2148,19 @@
}
/*
- * idetape_position_tape positions the tape to the requested block
- * using the LOCATE packet command. A READ POSITION command is then
- * issued to check where we are positioned.
- *
- * Like all higher level operations, we queue the commands at the tail
- * of the request queue and wait for their completion.
- *
+ * Position the tape to the requested block using the LOCATE packet command.
+ * A READ POSITION command is then issued to check where we are positioned. Like
+ * all higher level operations, we queue the commands at the tail of the request
+ * queue and wait for their completion.
*/
-static int idetape_position_tape (ide_drive_t *drive, unsigned int block, u8 partition, int skip)
+static int idetape_position_tape(ide_drive_t *drive, unsigned int block,
+ u8 partition, int skip)
{
idetape_tape_t *tape = drive->driver_data;
int retval;
idetape_pc_t pc;
- if (tape->chrdev_direction == idetape_direction_read)
+ if (tape->chrdev_dir == IDETAPE_DIR_READ)
__idetape_discard_read_pipeline(drive);
idetape_wait_ready(drive, 60 * 5 * HZ);
idetape_create_locate_cmd(drive, &pc, block, partition, skip);
@@ -2338,7 +2172,8 @@
return (idetape_queue_pc_tail(drive, &pc));
}
-static void idetape_discard_read_pipeline (ide_drive_t *drive, int restore_position)
+static void idetape_discard_read_pipeline(ide_drive_t *drive,
+ int restore_position)
{
idetape_tape_t *tape = drive->driver_data;
int cnt;
@@ -2349,35 +2184,37 @@
position = idetape_read_position(drive);
seek = position > cnt ? position - cnt : 0;
if (idetape_position_tape(drive, seek, 0, 0)) {
- printk(KERN_INFO "ide-tape: %s: position_tape failed in discard_pipeline()\n", tape->name);
+ printk(KERN_INFO "ide-tape: %s: position_tape failed in"
+ " discard_pipeline()\n", tape->name);
return;
}
}
}
/*
- * idetape_queue_rw_tail generates a read/write request for the block
- * device interface and wait for it to be serviced.
+ * Generate a read/write request for the block device interface and wait for it
+ * to be serviced.
*/
-static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, struct idetape_bh *bh)
+static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks,
+ struct idetape_bh *bh)
{
idetape_tape_t *tape = drive->driver_data;
struct request rq;
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 2)
- printk(KERN_INFO "ide-tape: idetape_queue_rw_tail: cmd=%d\n",cmd);
-#endif /* IDETAPE_DEBUG_LOG */
+ debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd);
+
if (idetape_pipeline_active(tape)) {
- printk(KERN_ERR "ide-tape: bug: the pipeline is active in idetape_queue_rw_tail\n");
+ printk(KERN_ERR "ide-tape: bug: the pipeline is active in %s\n",
+ __func__);
return (0);
}
idetape_init_rq(&rq, cmd);
rq.rq_disk = tape->disk;
rq.special = (void *)bh;
- rq.sector = tape->first_frame_position;
- rq.nr_sectors = rq.current_nr_sectors = blocks;
+ rq.sector = tape->first_frame;
+ rq.nr_sectors = blocks;
+ rq.current_nr_sectors = blocks;
(void) ide_do_drive_cmd(drive, &rq, ide_wait);
if ((cmd & (REQ_IDETAPE_READ | REQ_IDETAPE_WRITE)) == 0)
@@ -2387,14 +2224,11 @@
idetape_init_merge_stage(tape);
if (rq.errors == IDETAPE_ERROR_GENERAL)
return -EIO;
- return (tape->tape_block_size * (blocks-rq.current_nr_sectors));
+ return (tape->blk_size * (blocks-rq.current_nr_sectors));
}
-/*
- * idetape_insert_pipeline_into_queue is used to start servicing the
- * pipeline stages, starting from tape->next_stage.
- */
-static void idetape_insert_pipeline_into_queue (ide_drive_t *drive)
+/* start servicing the pipeline stages, starting from tape->next_stage. */
+static void idetape_plug_pipeline(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
@@ -2403,19 +2237,20 @@
if (!idetape_pipeline_active(tape)) {
set_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags);
idetape_activate_next_stage(drive);
- (void) ide_do_drive_cmd(drive, tape->active_data_request, ide_end);
+ (void) ide_do_drive_cmd(drive, tape->active_data_rq, ide_end);
}
}
-static void idetape_create_inquiry_cmd (idetape_pc_t *pc)
+static void idetape_create_inquiry_cmd(idetape_pc_t *pc)
{
idetape_init_pc(pc);
pc->c[0] = INQUIRY;
- pc->c[4] = pc->request_transfer = 254;
+ pc->c[4] = 254;
+ pc->request_transfer = 254;
pc->callback = &idetape_pc_callback;
}
-static void idetape_create_rewind_cmd (ide_drive_t *drive, idetape_pc_t *pc)
+static void idetape_create_rewind_cmd(ide_drive_t *drive, idetape_pc_t *pc)
{
idetape_init_pc(pc);
pc->c[0] = REZERO_UNIT;
@@ -2423,7 +2258,7 @@
pc->callback = &idetape_pc_callback;
}
-static void idetape_create_erase_cmd (idetape_pc_t *pc)
+static void idetape_create_erase_cmd(idetape_pc_t *pc)
{
idetape_init_pc(pc);
pc->c[0] = ERASE;
@@ -2432,7 +2267,7 @@
pc->callback = &idetape_pc_callback;
}
-static void idetape_create_space_cmd (idetape_pc_t *pc,int count, u8 cmd)
+static void idetape_create_space_cmd(idetape_pc_t *pc, int count, u8 cmd)
{
idetape_init_pc(pc);
pc->c[0] = SPACE;
@@ -2442,89 +2277,87 @@
pc->callback = &idetape_pc_callback;
}
-static void idetape_wait_first_stage (ide_drive_t *drive)
+static void idetape_wait_first_stage(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
unsigned long flags;
if (tape->first_stage == NULL)
return;
- spin_lock_irqsave(&tape->spinlock, flags);
+ spin_lock_irqsave(&tape->lock, flags);
if (tape->active_stage == tape->first_stage)
- idetape_wait_for_request(drive, tape->active_data_request);
- spin_unlock_irqrestore(&tape->spinlock, flags);
+ idetape_wait_for_request(drive, tape->active_data_rq);
+ spin_unlock_irqrestore(&tape->lock, flags);
}
/*
- * idetape_add_chrdev_write_request tries to add a character device
- * originated write request to our pipeline. In case we don't succeed,
- * we revert to non-pipelined operation mode for this request.
+ * Try to add a character device originated write request to our pipeline. In
+ * case we don't succeed, we revert to non-pipelined operation mode for this
+ * request. In order to accomplish that, we
*
- * 1. Try to allocate a new pipeline stage.
- * 2. If we can't, wait for more and more requests to be serviced
- * and try again each time.
- * 3. If we still can't allocate a stage, fallback to
- * non-pipelined operation mode for this request.
+ * 1. Try to allocate a new pipeline stage.
+ * 2. If we can't, wait for more and more requests to be serviced and try again
+ * each time.
+ * 3. If we still can't allocate a stage, fallback to non-pipelined operation
+ * mode for this request.
*/
-static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks)
+static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks)
{
idetape_tape_t *tape = drive->driver_data;
idetape_stage_t *new_stage;
unsigned long flags;
struct request *rq;
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 3)
- printk(KERN_INFO "ide-tape: Reached idetape_add_chrdev_write_request\n");
-#endif /* IDETAPE_DEBUG_LOG */
+ debug_log(DBG_CHRDEV, "Enter %s\n", __func__);
- /*
- * Attempt to allocate a new stage.
- * Pay special attention to possible race conditions.
- */
+ /* Attempt to allocate a new stage. Beware possible race conditions. */
while ((new_stage = idetape_kmalloc_stage(tape)) == NULL) {
- spin_lock_irqsave(&tape->spinlock, flags);
+ spin_lock_irqsave(&tape->lock, flags);
if (idetape_pipeline_active(tape)) {
- idetape_wait_for_request(drive, tape->active_data_request);
- spin_unlock_irqrestore(&tape->spinlock, flags);
+ idetape_wait_for_request(drive, tape->active_data_rq);
+ spin_unlock_irqrestore(&tape->lock, flags);
} else {
- spin_unlock_irqrestore(&tape->spinlock, flags);
- idetape_insert_pipeline_into_queue(drive);
+ spin_unlock_irqrestore(&tape->lock, flags);
+ idetape_plug_pipeline(drive);
if (idetape_pipeline_active(tape))
continue;
/*
- * Linux is short on memory. Fallback to
- * non-pipelined operation mode for this request.
+ * The machine is short on memory. Fallback to non-
+ * pipelined operation mode for this request.
*/
- return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks, tape->merge_stage->bh);
+ return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE,
+ blocks, tape->merge_stage->bh);
}
}
rq = &new_stage->rq;
idetape_init_rq(rq, REQ_IDETAPE_WRITE);
/* Doesn't actually matter - We always assume sequential access */
- rq->sector = tape->first_frame_position;
- rq->nr_sectors = rq->current_nr_sectors = blocks;
+ rq->sector = tape->first_frame;
+ rq->current_nr_sectors = blocks;
+ rq->nr_sectors = blocks;
idetape_switch_buffers(tape, new_stage);
idetape_add_stage_tail(drive, new_stage);
tape->pipeline_head++;
- calculate_speeds(drive);
+ idetape_calculate_speeds(drive);
/*
- * Estimate whether the tape has stopped writing by checking
- * if our write pipeline is currently empty. If we are not
- * writing anymore, wait for the pipeline to be full enough
- * (90%) before starting to service requests, so that we will
- * be able to keep up with the higher speeds of the tape.
+ * Estimate whether the tape has stopped writing by checking if our
+ * write pipeline is currently empty. If we are not writing anymore,
+ * wait for the pipeline to be almost completely full (90%) before
+ * starting to service requests, so that we will be able to keep up with
+ * the higher speeds of the tape.
*/
if (!idetape_pipeline_active(tape)) {
if (tape->nr_stages >= tape->max_stages * 9 / 10 ||
- tape->nr_stages >= tape->max_stages - tape->uncontrolled_pipeline_head_speed * 3 * 1024 / tape->tape_block_size) {
+ tape->nr_stages >= tape->max_stages -
+ tape->uncontrolled_pipeline_head_speed * 3 * 1024 /
+ tape->blk_size) {
tape->measure_insert_time = 1;
tape->insert_time = jiffies;
tape->insert_size = 0;
tape->insert_speed = 0;
- idetape_insert_pipeline_into_queue(drive);
+ idetape_plug_pipeline(drive);
}
}
if (test_and_clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags))
@@ -2534,31 +2367,32 @@
}
/*
- * idetape_wait_for_pipeline will wait until all pending pipeline
- * requests are serviced. Typically called on device close.
+ * Wait until all pending pipeline requests are serviced. Typically called on
+ * device close.
*/
-static void idetape_wait_for_pipeline (ide_drive_t *drive)
+static void idetape_wait_for_pipeline(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
unsigned long flags;
while (tape->next_stage || idetape_pipeline_active(tape)) {
- idetape_insert_pipeline_into_queue(drive);
- spin_lock_irqsave(&tape->spinlock, flags);
+ idetape_plug_pipeline(drive);
+ spin_lock_irqsave(&tape->lock, flags);
if (idetape_pipeline_active(tape))
- idetape_wait_for_request(drive, tape->active_data_request);
- spin_unlock_irqrestore(&tape->spinlock, flags);
+ idetape_wait_for_request(drive, tape->active_data_rq);
+ spin_unlock_irqrestore(&tape->lock, flags);
}
}
-static void idetape_empty_write_pipeline (ide_drive_t *drive)
+static void idetape_empty_write_pipeline(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
int blocks, min;
struct idetape_bh *bh;
- if (tape->chrdev_direction != idetape_direction_write) {
- printk(KERN_ERR "ide-tape: bug: Trying to empty write pipeline, but we are not writing.\n");
+ if (tape->chrdev_dir != IDETAPE_DIR_WRITE) {
+ printk(KERN_ERR "ide-tape: bug: Trying to empty write pipeline,"
+ " but we are not writing.\n");
return;
}
if (tape->merge_stage_size > tape->stage_size) {
@@ -2566,12 +2400,13 @@
tape->merge_stage_size = tape->stage_size;
}
if (tape->merge_stage_size) {
- blocks = tape->merge_stage_size / tape->tape_block_size;
- if (tape->merge_stage_size % tape->tape_block_size) {
+ blocks = tape->merge_stage_size / tape->blk_size;
+ if (tape->merge_stage_size % tape->blk_size) {
unsigned int i;
blocks++;
- i = tape->tape_block_size - tape->merge_stage_size % tape->tape_block_size;
+ i = tape->blk_size - tape->merge_stage_size %
+ tape->blk_size;
bh = tape->bh->b_reqnext;
while (bh) {
atomic_set(&bh->b_count, 0);
@@ -2580,12 +2415,14 @@
bh = tape->bh;
while (i) {
if (bh == NULL) {
-
- printk(KERN_INFO "ide-tape: bug, bh NULL\n");
+ printk(KERN_INFO "ide-tape: bug,"
+ " bh NULL\n");
break;
}
- min = min(i, (unsigned int)(bh->b_size - atomic_read(&bh->b_count)));
- memset(bh->b_data + atomic_read(&bh->b_count), 0, min);
+ min = min(i, (unsigned int)(bh->b_size -
+ atomic_read(&bh->b_count)));
+ memset(bh->b_data + atomic_read(&bh->b_count),
+ 0, min);
atomic_add(min, &bh->b_count);
i -= min;
bh = bh->b_reqnext;
@@ -2600,13 +2437,13 @@
tape->merge_stage = NULL;
}
clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
- tape->chrdev_direction = idetape_direction_none;
+ tape->chrdev_dir = IDETAPE_DIR_NONE;
/*
- * On the next backup, perform the feedback loop again.
- * (I don't want to keep sense information between backups,
- * as some systems are constantly on, and the system load
- * can be totally different on the next backup).
+ * On the next backup, perform the feedback loop again. (I don't want to
+ * keep sense information between backups, as some systems are
+ * constantly on, and the system load can be totally different on the
+ * next backup).
*/
tape->max_stages = tape->min_pipeline;
if (tape->first_stage != NULL ||
@@ -2621,21 +2458,25 @@
}
}
-static void idetape_restart_speed_control (ide_drive_t *drive)
+static void idetape_restart_speed_control(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
tape->restart_speed_control_req = 0;
tape->pipeline_head = 0;
- tape->controlled_last_pipeline_head = tape->uncontrolled_last_pipeline_head = 0;
- tape->controlled_previous_pipeline_head = tape->uncontrolled_previous_pipeline_head = 0;
- tape->pipeline_head_speed = tape->controlled_pipeline_head_speed = 5000;
+ tape->controlled_last_pipeline_head = 0;
+ tape->controlled_previous_pipeline_head = 0;
+ tape->uncontrolled_previous_pipeline_head = 0;
+ tape->controlled_pipeline_head_speed = 5000;
+ tape->pipeline_head_speed = 5000;
tape->uncontrolled_pipeline_head_speed = 0;
- tape->controlled_pipeline_head_time = tape->uncontrolled_pipeline_head_time = jiffies;
- tape->controlled_previous_head_time = tape->uncontrolled_previous_head_time = jiffies;
+ tape->controlled_pipeline_head_time =
+ tape->uncontrolled_pipeline_head_time = jiffies;
+ tape->controlled_previous_head_time =
+ tape->uncontrolled_previous_head_time = jiffies;
}
-static int idetape_initiate_read (ide_drive_t *drive, int max_stages)
+static int idetape_init_read(ide_drive_t *drive, int max_stages)
{
idetape_tape_t *tape = drive->driver_data;
idetape_stage_t *new_stage;
@@ -2644,32 +2485,35 @@
u16 blocks = *(u16 *)&tape->caps[12];
/* Initialize read operation */
- if (tape->chrdev_direction != idetape_direction_read) {
- if (tape->chrdev_direction == idetape_direction_write) {
+ if (tape->chrdev_dir != IDETAPE_DIR_READ) {
+ if (tape->chrdev_dir == IDETAPE_DIR_WRITE) {
idetape_empty_write_pipeline(drive);
idetape_flush_tape_buffers(drive);
}
if (tape->merge_stage || tape->merge_stage_size) {
- printk (KERN_ERR "ide-tape: merge_stage_size should be 0 now\n");
+ printk(KERN_ERR "ide-tape: merge_stage_size should be"
+ " 0 now\n");
tape->merge_stage_size = 0;
}
- if ((tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0)) == NULL)
+ tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0);
+ if (!tape->merge_stage)
return -ENOMEM;
- tape->chrdev_direction = idetape_direction_read;
+ tape->chrdev_dir = IDETAPE_DIR_READ;
/*
- * Issue a read 0 command to ensure that DSC handshake
- * is switched from completion mode to buffer available
- * mode.
- * No point in issuing this if DSC overlap isn't supported,
- * some drives (Seagate STT3401A) will return an error.
+ * Issue a read 0 command to ensure that DSC handshake is
+ * switched from completion mode to buffer available mode.
+ * No point in issuing this if DSC overlap isn't supported, some
+ * drives (Seagate STT3401A) will return an error.
*/
if (drive->dsc_overlap) {
- bytes_read = idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, 0, tape->merge_stage->bh);
+ bytes_read = idetape_queue_rw_tail(drive,
+ REQ_IDETAPE_READ, 0,
+ tape->merge_stage->bh);
if (bytes_read < 0) {
__idetape_kfree_stage(tape->merge_stage);
tape->merge_stage = NULL;
- tape->chrdev_direction = idetape_direction_none;
+ tape->chrdev_dir = IDETAPE_DIR_NONE;
return bytes_read;
}
}
@@ -2677,8 +2521,9 @@
if (tape->restart_speed_control_req)
idetape_restart_speed_control(drive);
idetape_init_rq(&rq, REQ_IDETAPE_READ);
- rq.sector = tape->first_frame_position;
- rq.nr_sectors = rq.current_nr_sectors = blocks;
+ rq.sector = tape->first_frame;
+ rq.nr_sectors = blocks;
+ rq.current_nr_sectors = blocks;
if (!test_bit(IDETAPE_PIPELINE_ERROR, &tape->flags) &&
tape->nr_stages < max_stages) {
new_stage = idetape_kmalloc_stage(tape);
@@ -2696,50 +2541,43 @@
tape->insert_time = jiffies;
tape->insert_size = 0;
tape->insert_speed = 0;
- idetape_insert_pipeline_into_queue(drive);
+ idetape_plug_pipeline(drive);
}
}
return 0;
}
/*
- * idetape_add_chrdev_read_request is called from idetape_chrdev_read
- * to service a character device read request and add read-ahead
- * requests to our pipeline.
+ * Called from idetape_chrdev_read() to service a character device read request
+ * and add read-ahead requests to our pipeline.
*/
-static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks)
+static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks)
{
idetape_tape_t *tape = drive->driver_data;
unsigned long flags;
struct request *rq_ptr;
int bytes_read;
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 4)
- printk(KERN_INFO "ide-tape: Reached idetape_add_chrdev_read_request, %d blocks\n", blocks);
-#endif /* IDETAPE_DEBUG_LOG */
+ debug_log(DBG_PROCS, "Enter %s, %d blocks\n", __func__, blocks);
- /*
- * If we are at a filemark, return a read length of 0
- */
+ /* If we are at a filemark, return a read length of 0 */
if (test_bit(IDETAPE_FILEMARK, &tape->flags))
return 0;
- /*
- * Wait for the next block to be available at the head
- * of the pipeline
- */
- idetape_initiate_read(drive, tape->max_stages);
+ /* Wait for the next block to reach the head of the pipeline. */
+ idetape_init_read(drive, tape->max_stages);
if (tape->first_stage == NULL) {
if (test_bit(IDETAPE_PIPELINE_ERROR, &tape->flags))
return 0;
- return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks, tape->merge_stage->bh);
+ return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks,
+ tape->merge_stage->bh);
}
idetape_wait_first_stage(drive);
rq_ptr = &tape->first_stage->rq;
- bytes_read = tape->tape_block_size * (rq_ptr->nr_sectors - rq_ptr->current_nr_sectors);
- rq_ptr->nr_sectors = rq_ptr->current_nr_sectors = 0;
-
+ bytes_read = tape->blk_size * (rq_ptr->nr_sectors -
+ rq_ptr->current_nr_sectors);
+ rq_ptr->nr_sectors = 0;
+ rq_ptr->current_nr_sectors = 0;
if (rq_ptr->errors == IDETAPE_ERROR_EOD)
return 0;
@@ -2747,43 +2585,46 @@
idetape_switch_buffers(tape, tape->first_stage);
if (rq_ptr->errors == IDETAPE_ERROR_FILEMARK)
set_bit(IDETAPE_FILEMARK, &tape->flags);
- spin_lock_irqsave(&tape->spinlock, flags);
+ spin_lock_irqsave(&tape->lock, flags);
idetape_remove_stage_head(drive);
- spin_unlock_irqrestore(&tape->spinlock, flags);
+ spin_unlock_irqrestore(&tape->lock, flags);
tape->pipeline_head++;
- calculate_speeds(drive);
+ idetape_calculate_speeds(drive);
}
- if (bytes_read > blocks * tape->tape_block_size) {
- printk(KERN_ERR "ide-tape: bug: trying to return more bytes than requested\n");
- bytes_read = blocks * tape->tape_block_size;
+ if (bytes_read > blocks * tape->blk_size) {
+ printk(KERN_ERR "ide-tape: bug: trying to return more bytes"
+ " than requested\n");
+ bytes_read = blocks * tape->blk_size;
}
return (bytes_read);
}
-static void idetape_pad_zeros (ide_drive_t *drive, int bcount)
+static void idetape_pad_zeros(ide_drive_t *drive, int bcount)
{
idetape_tape_t *tape = drive->driver_data;
struct idetape_bh *bh;
int blocks;
-
+
while (bcount) {
unsigned int count;
bh = tape->merge_stage->bh;
count = min(tape->stage_size, bcount);
bcount -= count;
- blocks = count / tape->tape_block_size;
+ blocks = count / tape->blk_size;
while (count) {
- atomic_set(&bh->b_count, min(count, (unsigned int)bh->b_size));
+ atomic_set(&bh->b_count,
+ min(count, (unsigned int)bh->b_size));
memset(bh->b_data, 0, atomic_read(&bh->b_count));
count -= atomic_read(&bh->b_count);
bh = bh->b_reqnext;
}
- idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks, tape->merge_stage->bh);
+ idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks,
+ tape->merge_stage->bh);
}
}
-static int idetape_pipeline_size (ide_drive_t *drive)
+static int idetape_pipeline_size(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
idetape_stage_t *stage;
@@ -2794,9 +2635,10 @@
stage = tape->first_stage;
while (stage != NULL) {
rq = &stage->rq;
- size += tape->tape_block_size * (rq->nr_sectors-rq->current_nr_sectors);
+ size += tape->blk_size * (rq->nr_sectors -
+ rq->current_nr_sectors);
if (rq->errors == IDETAPE_ERROR_FILEMARK)
- size += tape->tape_block_size;
+ size += tape->blk_size;
stage = stage->next;
}
size += tape->merge_stage_size;
@@ -2804,20 +2646,18 @@
}
/*
- * Rewinds the tape to the Beginning Of the current Partition (BOP).
- *
- * We currently support only one partition.
- */
-static int idetape_rewind_tape (ide_drive_t *drive)
+ * Rewinds the tape to the Beginning Of the current Partition (BOP). We
+ * currently support only one partition.
+ */
+static int idetape_rewind_tape(ide_drive_t *drive)
{
int retval;
idetape_pc_t pc;
-#if IDETAPE_DEBUG_LOG
- idetape_tape_t *tape = drive->driver_data;
- if (tape->debug_level >= 2)
- printk(KERN_INFO "ide-tape: Reached idetape_rewind_tape\n");
-#endif /* IDETAPE_DEBUG_LOG */
-
+ idetape_tape_t *tape;
+ tape = drive->driver_data;
+
+ debug_log(DBG_SENSE, "Enter %s\n", __func__);
+
idetape_create_rewind_cmd(drive, &pc);
retval = idetape_queue_pc_tail(drive, &pc);
if (retval)
@@ -2830,14 +2670,9 @@
return 0;
}
-/*
- * Our special ide-tape ioctl's.
- *
- * Currently there aren't any ioctl's.
- * mtio.h compatible commands should be issued to the character device
- * interface.
- */
-static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, unsigned long arg)
+/* mtio.h compatible commands should be issued to the chrdev interface. */
+static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd,
+ unsigned long arg)
{
idetape_tape_t *tape = drive->driver_data;
void __user *argp = (void __user *)arg;
@@ -2848,44 +2683,41 @@
int nr_stages;
} config;
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 4)
- printk(KERN_INFO "ide-tape: Reached idetape_blkdev_ioctl\n");
-#endif /* IDETAPE_DEBUG_LOG */
+ debug_log(DBG_PROCS, "Enter %s\n", __func__);
+
switch (cmd) {
- case 0x0340:
- if (copy_from_user(&config, argp, sizeof(config)))
- return -EFAULT;
- tape->best_dsc_rw_frequency = config.dsc_rw_frequency;
- tape->max_stages = config.nr_stages;
- break;
- case 0x0350:
- config.dsc_rw_frequency = (int) tape->best_dsc_rw_frequency;
- config.nr_stages = tape->max_stages;
- if (copy_to_user(argp, &config, sizeof(config)))
- return -EFAULT;
- break;
- default:
- return -EIO;
+ case 0x0340:
+ if (copy_from_user(&config, argp, sizeof(config)))
+ return -EFAULT;
+ tape->best_dsc_rw_freq = config.dsc_rw_frequency;
+ tape->max_stages = config.nr_stages;
+ break;
+ case 0x0350:
+ config.dsc_rw_frequency = (int) tape->best_dsc_rw_freq;
+ config.nr_stages = tape->max_stages;
+ if (copy_to_user(argp, &config, sizeof(config)))
+ return -EFAULT;
+ break;
+ default:
+ return -EIO;
}
return 0;
}
/*
- * idetape_space_over_filemarks is now a bit more complicated than just
- * passing the command to the tape since we may have crossed some
- * filemarks during our pipelined read-ahead mode.
- *
- * As a minor side effect, the pipeline enables us to support MTFSFM when
- * the filemark is in our internal pipeline even if the tape doesn't
- * support spacing over filemarks in the reverse direction.
+ * The function below is now a bit more complicated than just passing the
+ * command to the tape since we may have crossed some filemarks during our
+ * pipelined read-ahead mode. As a minor side effect, the pipeline enables us to
+ * support MTFSFM when the filemark is in our internal pipeline even if the tape
+ * doesn't support spacing over filemarks in the reverse direction.
*/
-static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_count)
+static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op,
+ int mt_count)
{
idetape_tape_t *tape = drive->driver_data;
idetape_pc_t pc;
unsigned long flags;
- int retval,count=0;
+ int retval, count = 0;
int sprev = !!(tape->caps[4] & 0x20);
if (mt_count == 0)
@@ -2893,14 +2725,11 @@
if (MTBSF == mt_op || MTBSFM == mt_op) {
if (!sprev)
return -EIO;
- mt_count = - mt_count;
+ mt_count = -mt_count;
}
- if (tape->chrdev_direction == idetape_direction_read) {
- /*
- * We have a read-ahead buffer. Scan it for crossed
- * filemarks.
- */
+ if (tape->chrdev_dir == IDETAPE_DIR_READ) {
+ /* its a read-ahead buffer, scan it for crossed filemarks. */
tape->merge_stage_size = 0;
if (test_and_clear_bit(IDETAPE_FILEMARK, &tape->flags))
++count;
@@ -2910,24 +2739,27 @@
set_bit(IDETAPE_FILEMARK, &tape->flags);
return 0;
}
- spin_lock_irqsave(&tape->spinlock, flags);
+ spin_lock_irqsave(&tape->lock, flags);
if (tape->first_stage == tape->active_stage) {
/*
- * We have reached the active stage in the read pipeline.
- * There is no point in allowing the drive to continue
- * reading any farther, so we stop the pipeline.
+ * We have reached the active stage in the read
+ * pipeline. There is no point in allowing the
+ * drive to continue reading any farther, so we
+ * stop the pipeline.
*
- * This section should be moved to a separate subroutine,
- * because a similar function is performed in
- * __idetape_discard_read_pipeline(), for example.
+ * This section should be moved to a separate
+ * subroutine because similar operations are
+ * done in __idetape_discard_read_pipeline(),
+ * for example.
*/
tape->next_stage = NULL;
- spin_unlock_irqrestore(&tape->spinlock, flags);
+ spin_unlock_irqrestore(&tape->lock, flags);
idetape_wait_first_stage(drive);
tape->next_stage = tape->first_stage->next;
} else
- spin_unlock_irqrestore(&tape->spinlock, flags);
- if (tape->first_stage->rq.errors == IDETAPE_ERROR_FILEMARK)
+ spin_unlock_irqrestore(&tape->lock, flags);
+ if (tape->first_stage->rq.errors ==
+ IDETAPE_ERROR_FILEMARK)
++count;
idetape_remove_stage_head(drive);
}
@@ -2935,73 +2767,74 @@
}
/*
- * The filemark was not found in our internal pipeline.
- * Now we can issue the space command.
+ * The filemark was not found in our internal pipeline; now we can issue
+ * the space command.
*/
switch (mt_op) {
- case MTFSF:
- case MTBSF:
- idetape_create_space_cmd(&pc,mt_count-count,IDETAPE_SPACE_OVER_FILEMARK);
- return (idetape_queue_pc_tail(drive, &pc));
- case MTFSFM:
- case MTBSFM:
- if (!sprev)
- return (-EIO);
- retval = idetape_space_over_filemarks(drive, MTFSF, mt_count-count);
- if (retval) return (retval);
- count = (MTBSFM == mt_op ? 1 : -1);
- return (idetape_space_over_filemarks(drive, MTFSF, count));
- default:
- printk(KERN_ERR "ide-tape: MTIO operation %d not supported\n",mt_op);
- return (-EIO);
+ case MTFSF:
+ case MTBSF:
+ idetape_create_space_cmd(&pc, mt_count - count,
+ IDETAPE_SPACE_OVER_FILEMARK);
+ return idetape_queue_pc_tail(drive, &pc);
+ case MTFSFM:
+ case MTBSFM:
+ if (!sprev)
+ return -EIO;
+ retval = idetape_space_over_filemarks(drive, MTFSF,
+ mt_count - count);
+ if (retval)
+ return retval;
+ count = (MTBSFM == mt_op ? 1 : -1);
+ return idetape_space_over_filemarks(drive, MTFSF, count);
+ default:
+ printk(KERN_ERR "ide-tape: MTIO operation %d not supported\n",
+ mt_op);
+ return -EIO;
}
}
-
/*
- * Our character device read / write functions.
+ * Our character device read / write functions.
*
- * The tape is optimized to maximize throughput when it is transferring
- * an integral number of the "continuous transfer limit", which is
- * a parameter of the specific tape (26 KB on my particular tape).
- * (32 kB for Onstream)
+ * The tape is optimized to maximize throughput when it is transferring an
+ * integral number of the "continuous transfer limit", which is a parameter of
+ * the specific tape (26kB on my particular tape, 32kB for Onstream).
*
- * As of version 1.3 of the driver, the character device provides an
- * abstract continuous view of the media - any mix of block sizes (even 1
- * byte) on the same backup/restore procedure is supported. The driver
- * will internally convert the requests to the recommended transfer unit,
- * so that an unmatch between the user's block size to the recommended
- * size will only result in a (slightly) increased driver overhead, but
- * will no longer hit performance.
- * This is not applicable to Onstream.
+ * As of version 1.3 of the driver, the character device provides an abstract
+ * continuous view of the media - any mix of block sizes (even 1 byte) on the
+ * same backup/restore procedure is supported. The driver will internally
+ * convert the requests to the recommended transfer unit, so that an unmatch
+ * between the user's block size to the recommended size will only result in a
+ * (slightly) increased driver overhead, but will no longer hit performance.
+ * This is not applicable to Onstream.
*/
-static ssize_t idetape_chrdev_read (struct file *file, char __user *buf,
- size_t count, loff_t *ppos)
+static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
{
struct ide_tape_obj *tape = ide_tape_f(file);
ide_drive_t *drive = tape->drive;
- ssize_t bytes_read,temp, actually_read = 0, rc;
+ ssize_t bytes_read, temp, actually_read = 0, rc;
ssize_t ret = 0;
u16 ctl = *(u16 *)&tape->caps[12];
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 3)
- printk(KERN_INFO "ide-tape: Reached idetape_chrdev_read, count %Zd\n", count);
-#endif /* IDETAPE_DEBUG_LOG */
+ debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
- if (tape->chrdev_direction != idetape_direction_read) {
+ if (tape->chrdev_dir != IDETAPE_DIR_READ) {
if (test_bit(IDETAPE_DETECT_BS, &tape->flags))
- if (count > tape->tape_block_size &&
- (count % tape->tape_block_size) == 0)
- tape->user_bs_factor = count / tape->tape_block_size;
+ if (count > tape->blk_size &&
+ (count % tape->blk_size) == 0)
+ tape->user_bs_factor = count / tape->blk_size;
}
- if ((rc = idetape_initiate_read(drive, tape->max_stages)) < 0)
+ rc = idetape_init_read(drive, tape->max_stages);
+ if (rc < 0)
return rc;
if (count == 0)
return (0);
if (tape->merge_stage_size) {
- actually_read = min((unsigned int)(tape->merge_stage_size), (unsigned int)count);
- if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, actually_read))
+ actually_read = min((unsigned int)(tape->merge_stage_size),
+ (unsigned int)count);
+ if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage,
+ actually_read))
ret = -EFAULT;
buf += actually_read;
tape->merge_stage_size -= actually_read;
@@ -3011,7 +2844,8 @@
bytes_read = idetape_add_chrdev_read_request(drive, ctl);
if (bytes_read <= 0)
goto finish;
- if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, bytes_read))
+ if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage,
+ bytes_read))
ret = -EFAULT;
buf += bytes_read;
count -= bytes_read;
@@ -3022,25 +2856,24 @@
if (bytes_read <= 0)
goto finish;
temp = min((unsigned long)count, (unsigned long)bytes_read);
- if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, temp))
+ if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage,
+ temp))
ret = -EFAULT;
actually_read += temp;
tape->merge_stage_size = bytes_read-temp;
}
finish:
if (!actually_read && test_bit(IDETAPE_FILEMARK, &tape->flags)) {
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 2)
- printk(KERN_INFO "ide-tape: %s: spacing over filemark\n", tape->name);
-#endif
+ debug_log(DBG_SENSE, "%s: spacing over filemark\n", tape->name);
+
idetape_space_over_filemarks(drive, MTFSF, 1);
return 0;
}
- return (ret) ? ret : actually_read;
+ return ret ? ret : actually_read;
}
-static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf,
+static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
struct ide_tape_obj *tape = ide_tape_f(file);
@@ -3053,39 +2886,37 @@
if (tape->write_prot)
return -EACCES;
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 3)
- printk(KERN_INFO "ide-tape: Reached idetape_chrdev_write, "
- "count %Zd\n", count);
-#endif /* IDETAPE_DEBUG_LOG */
+ debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
/* Initialize write operation */
- if (tape->chrdev_direction != idetape_direction_write) {
- if (tape->chrdev_direction == idetape_direction_read)
+ if (tape->chrdev_dir != IDETAPE_DIR_WRITE) {
+ if (tape->chrdev_dir == IDETAPE_DIR_READ)
idetape_discard_read_pipeline(drive, 1);
if (tape->merge_stage || tape->merge_stage_size) {
printk(KERN_ERR "ide-tape: merge_stage_size "
"should be 0 now\n");
tape->merge_stage_size = 0;
}
- if ((tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0)) == NULL)
+ tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0);
+ if (!tape->merge_stage)
return -ENOMEM;
- tape->chrdev_direction = idetape_direction_write;
+ tape->chrdev_dir = IDETAPE_DIR_WRITE;
idetape_init_merge_stage(tape);
/*
- * Issue a write 0 command to ensure that DSC handshake
- * is switched from completion mode to buffer available
- * mode.
- * No point in issuing this if DSC overlap isn't supported,
- * some drives (Seagate STT3401A) will return an error.
+ * Issue a write 0 command to ensure that DSC handshake is
+ * switched from completion mode to buffer available mode. No
+ * point in issuing this if DSC overlap isn't supported, some
+ * drives (Seagate STT3401A) will return an error.
*/
if (drive->dsc_overlap) {
- ssize_t retval = idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, 0, tape->merge_stage->bh);
+ ssize_t retval = idetape_queue_rw_tail(drive,
+ REQ_IDETAPE_WRITE, 0,
+ tape->merge_stage->bh);
if (retval < 0) {
__idetape_kfree_stage(tape->merge_stage);
tape->merge_stage = NULL;
- tape->chrdev_direction = idetape_direction_none;
+ tape->chrdev_dir = IDETAPE_DIR_NONE;
return retval;
}
}
@@ -3096,11 +2927,14 @@
idetape_restart_speed_control(drive);
if (tape->merge_stage_size) {
if (tape->merge_stage_size >= tape->stage_size) {
- printk(KERN_ERR "ide-tape: bug: merge buffer too big\n");
+ printk(KERN_ERR "ide-tape: bug: merge buf too big\n");
tape->merge_stage_size = 0;
}
- actually_written = min((unsigned int)(tape->stage_size - tape->merge_stage_size), (unsigned int)count);
- if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, actually_written))
+ actually_written = min((unsigned int)
+ (tape->stage_size - tape->merge_stage_size),
+ (unsigned int)count);
+ if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf,
+ actually_written))
ret = -EFAULT;
buf += actually_written;
tape->merge_stage_size += actually_written;
@@ -3116,7 +2950,8 @@
}
while (count >= tape->stage_size) {
ssize_t retval;
- if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, tape->stage_size))
+ if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf,
+ tape->stage_size))
ret = -EFAULT;
buf += tape->stage_size;
count -= tape->stage_size;
@@ -3127,14 +2962,15 @@
}
if (count) {
actually_written += count;
- if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, count))
+ if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf,
+ count))
ret = -EFAULT;
tape->merge_stage_size += count;
}
- return (ret) ? ret : actually_written;
+ return ret ? ret : actually_written;
}
-static int idetape_write_filemark (ide_drive_t *drive)
+static int idetape_write_filemark(ide_drive_t *drive)
{
idetape_pc_t pc;
@@ -3165,113 +3001,117 @@
{
idetape_tape_t *tape = drive->driver_data;
idetape_pc_t pc;
- int i,retval;
+ int i, retval;
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 1)
- printk(KERN_INFO "ide-tape: Handling MTIOCTOP ioctl: "
- "mt_op=%d, mt_count=%d\n", mt_op, mt_count);
-#endif /* IDETAPE_DEBUG_LOG */
- /*
- * Commands which need our pipelined read-ahead stages.
- */
+ debug_log(DBG_ERR, "Handling MTIOCTOP ioctl: mt_op=%d, mt_count=%d\n",
+ mt_op, mt_count);
+
+ /* Commands which need our pipelined read-ahead stages. */
switch (mt_op) {
- case MTFSF:
- case MTFSFM:
- case MTBSF:
- case MTBSFM:
- if (!mt_count)
- return (0);
- return (idetape_space_over_filemarks(drive,mt_op,mt_count));
- default:
- break;
+ case MTFSF:
+ case MTFSFM:
+ case MTBSF:
+ case MTBSFM:
+ if (!mt_count)
+ return 0;
+ return idetape_space_over_filemarks(drive, mt_op, mt_count);
+ default:
+ break;
}
+
switch (mt_op) {
- case MTWEOF:
- if (tape->write_prot)
- return -EACCES;
- idetape_discard_read_pipeline(drive, 1);
- for (i = 0; i < mt_count; i++) {
- retval = idetape_write_filemark(drive);
- if (retval)
- return retval;
- }
- return (0);
- case MTREW:
- idetape_discard_read_pipeline(drive, 0);
- if (idetape_rewind_tape(drive))
+ case MTWEOF:
+ if (tape->write_prot)
+ return -EACCES;
+ idetape_discard_read_pipeline(drive, 1);
+ for (i = 0; i < mt_count; i++) {
+ retval = idetape_write_filemark(drive);
+ if (retval)
+ return retval;
+ }
+ return 0;
+ case MTREW:
+ idetape_discard_read_pipeline(drive, 0);
+ if (idetape_rewind_tape(drive))
+ return -EIO;
+ return 0;
+ case MTLOAD:
+ idetape_discard_read_pipeline(drive, 0);
+ idetape_create_load_unload_cmd(drive, &pc,
+ IDETAPE_LU_LOAD_MASK);
+ return idetape_queue_pc_tail(drive, &pc);
+ case MTUNLOAD:
+ case MTOFFL:
+ /*
+ * If door is locked, attempt to unlock before
+ * attempting to eject.
+ */
+ if (tape->door_locked) {
+ if (idetape_create_prevent_cmd(drive, &pc, 0))
+ if (!idetape_queue_pc_tail(drive, &pc))
+ tape->door_locked = DOOR_UNLOCKED;
+ }
+ idetape_discard_read_pipeline(drive, 0);
+ idetape_create_load_unload_cmd(drive, &pc,
+ !IDETAPE_LU_LOAD_MASK);
+ retval = idetape_queue_pc_tail(drive, &pc);
+ if (!retval)
+ clear_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags);
+ return retval;
+ case MTNOP:
+ idetape_discard_read_pipeline(drive, 0);
+ return idetape_flush_tape_buffers(drive);
+ case MTRETEN:
+ idetape_discard_read_pipeline(drive, 0);
+ idetape_create_load_unload_cmd(drive, &pc,
+ IDETAPE_LU_RETENSION_MASK | IDETAPE_LU_LOAD_MASK);
+ return idetape_queue_pc_tail(drive, &pc);
+ case MTEOM:
+ idetape_create_space_cmd(&pc, 0, IDETAPE_SPACE_TO_EOD);
+ return idetape_queue_pc_tail(drive, &pc);
+ case MTERASE:
+ (void)idetape_rewind_tape(drive);
+ idetape_create_erase_cmd(&pc);
+ return idetape_queue_pc_tail(drive, &pc);
+ case MTSETBLK:
+ if (mt_count) {
+ if (mt_count < tape->blk_size ||
+ mt_count % tape->blk_size)
return -EIO;
+ tape->user_bs_factor = mt_count / tape->blk_size;
+ clear_bit(IDETAPE_DETECT_BS, &tape->flags);
+ } else
+ set_bit(IDETAPE_DETECT_BS, &tape->flags);
+ return 0;
+ case MTSEEK:
+ idetape_discard_read_pipeline(drive, 0);
+ return idetape_position_tape(drive,
+ mt_count * tape->user_bs_factor, tape->partition, 0);
+ case MTSETPART:
+ idetape_discard_read_pipeline(drive, 0);
+ return idetape_position_tape(drive, 0, mt_count, 0);
+ case MTFSR:
+ case MTBSR:
+ case MTLOCK:
+ if (!idetape_create_prevent_cmd(drive, &pc, 1))
return 0;
- case MTLOAD:
- idetape_discard_read_pipeline(drive, 0);
- idetape_create_load_unload_cmd(drive, &pc, IDETAPE_LU_LOAD_MASK);
- return (idetape_queue_pc_tail(drive, &pc));
- case MTUNLOAD:
- case MTOFFL:
- /*
- * If door is locked, attempt to unlock before
- * attempting to eject.
- */
- if (tape->door_locked) {
- if (idetape_create_prevent_cmd(drive, &pc, 0))
- if (!idetape_queue_pc_tail(drive, &pc))
- tape->door_locked = DOOR_UNLOCKED;
- }
- idetape_discard_read_pipeline(drive, 0);
- idetape_create_load_unload_cmd(drive, &pc,!IDETAPE_LU_LOAD_MASK);
- retval = idetape_queue_pc_tail(drive, &pc);
- if (!retval)
- clear_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags);
+ retval = idetape_queue_pc_tail(drive, &pc);
+ if (retval)
return retval;
- case MTNOP:
- idetape_discard_read_pipeline(drive, 0);
- return (idetape_flush_tape_buffers(drive));
- case MTRETEN:
- idetape_discard_read_pipeline(drive, 0);
- idetape_create_load_unload_cmd(drive, &pc,IDETAPE_LU_RETENSION_MASK | IDETAPE_LU_LOAD_MASK);
- return (idetape_queue_pc_tail(drive, &pc));
- case MTEOM:
- idetape_create_space_cmd(&pc, 0, IDETAPE_SPACE_TO_EOD);
- return (idetape_queue_pc_tail(drive, &pc));
- case MTERASE:
- (void) idetape_rewind_tape(drive);
- idetape_create_erase_cmd(&pc);
- return (idetape_queue_pc_tail(drive, &pc));
- case MTSETBLK:
- if (mt_count) {
- if (mt_count < tape->tape_block_size || mt_count % tape->tape_block_size)
- return -EIO;
- tape->user_bs_factor = mt_count / tape->tape_block_size;
- clear_bit(IDETAPE_DETECT_BS, &tape->flags);
- } else
- set_bit(IDETAPE_DETECT_BS, &tape->flags);
+ tape->door_locked = DOOR_EXPLICITLY_LOCKED;
+ return 0;
+ case MTUNLOCK:
+ if (!idetape_create_prevent_cmd(drive, &pc, 0))
return 0;
- case MTSEEK:
- idetape_discard_read_pipeline(drive, 0);
- return idetape_position_tape(drive, mt_count * tape->user_bs_factor, tape->partition, 0);
- case MTSETPART:
- idetape_discard_read_pipeline(drive, 0);
- return (idetape_position_tape(drive, 0, mt_count, 0));
- case MTFSR:
- case MTBSR:
- case MTLOCK:
- if (!idetape_create_prevent_cmd(drive, &pc, 1))
- return 0;
- retval = idetape_queue_pc_tail(drive, &pc);
- if (retval) return retval;
- tape->door_locked = DOOR_EXPLICITLY_LOCKED;
- return 0;
- case MTUNLOCK:
- if (!idetape_create_prevent_cmd(drive, &pc, 0))
- return 0;
- retval = idetape_queue_pc_tail(drive, &pc);
- if (retval) return retval;
- tape->door_locked = DOOR_UNLOCKED;
- return 0;
- default:
- printk(KERN_ERR "ide-tape: MTIO operation %d not "
- "supported\n", mt_op);
- return (-EIO);
+ retval = idetape_queue_pc_tail(drive, &pc);
+ if (retval)
+ return retval;
+ tape->door_locked = DOOR_UNLOCKED;
+ return 0;
+ default:
+ printk(KERN_ERR "ide-tape: MTIO operation %d not supported\n",
+ mt_op);
+ return -EIO;
}
}
@@ -3288,50 +3128,51 @@
struct mtop mtop;
struct mtget mtget;
struct mtpos mtpos;
- int block_offset = 0, position = tape->first_frame_position;
+ int block_offset = 0, position = tape->first_frame;
void __user *argp = (void __user *)arg;
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 3)
- printk(KERN_INFO "ide-tape: Reached idetape_chrdev_ioctl, "
- "cmd=%u\n", cmd);
-#endif /* IDETAPE_DEBUG_LOG */
+ debug_log(DBG_CHRDEV, "Enter %s, cmd=%u\n", __func__, cmd);
tape->restart_speed_control_req = 1;
- if (tape->chrdev_direction == idetape_direction_write) {
+ if (tape->chrdev_dir == IDETAPE_DIR_WRITE) {
idetape_empty_write_pipeline(drive);
idetape_flush_tape_buffers(drive);
}
if (cmd == MTIOCGET || cmd == MTIOCPOS) {
- block_offset = idetape_pipeline_size(drive) / (tape->tape_block_size * tape->user_bs_factor);
- if ((position = idetape_read_position(drive)) < 0)
+ block_offset = idetape_pipeline_size(drive) /
+ (tape->blk_size * tape->user_bs_factor);
+ position = idetape_read_position(drive);
+ if (position < 0)
return -EIO;
}
switch (cmd) {
- case MTIOCTOP:
- if (copy_from_user(&mtop, argp, sizeof (struct mtop)))
- return -EFAULT;
- return (idetape_mtioctop(drive,mtop.mt_op,mtop.mt_count));
- case MTIOCGET:
- memset(&mtget, 0, sizeof (struct mtget));
- mtget.mt_type = MT_ISSCSI2;
- mtget.mt_blkno = position / tape->user_bs_factor - block_offset;
- mtget.mt_dsreg = ((tape->tape_block_size * tape->user_bs_factor) << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK;
- if (tape->drv_write_prot) {
- mtget.mt_gstat |= GMT_WR_PROT(0xffffffff);
- }
- if (copy_to_user(argp, &mtget, sizeof(struct mtget)))
- return -EFAULT;
- return 0;
- case MTIOCPOS:
- mtpos.mt_blkno = position / tape->user_bs_factor - block_offset;
- if (copy_to_user(argp, &mtpos, sizeof(struct mtpos)))
- return -EFAULT;
- return 0;
- default:
- if (tape->chrdev_direction == idetape_direction_read)
- idetape_discard_read_pipeline(drive, 1);
- return idetape_blkdev_ioctl(drive, cmd, arg);
+ case MTIOCTOP:
+ if (copy_from_user(&mtop, argp, sizeof(struct mtop)))
+ return -EFAULT;
+ return idetape_mtioctop(drive, mtop.mt_op, mtop.mt_count);
+ case MTIOCGET:
+ memset(&mtget, 0, sizeof(struct mtget));
+ mtget.mt_type = MT_ISSCSI2;
+ mtget.mt_blkno = position / tape->user_bs_factor - block_offset;
+ mtget.mt_dsreg =
+ ((tape->blk_size * tape->user_bs_factor)
+ << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK;
+
+ if (tape->drv_write_prot)
+ mtget.mt_gstat |= GMT_WR_PROT(0xffffffff);
+
+ if (copy_to_user(argp, &mtget, sizeof(struct mtget)))
+ return -EFAULT;
+ return 0;
+ case MTIOCPOS:
+ mtpos.mt_blkno = position / tape->user_bs_factor - block_offset;
+ if (copy_to_user(argp, &mtpos, sizeof(struct mtpos)))
+ return -EFAULT;
+ return 0;
+ default:
+ if (tape->chrdev_dir == IDETAPE_DIR_READ)
+ idetape_discard_read_pipeline(drive, 1);
+ return idetape_blkdev_ioctl(drive, cmd, arg);
}
}
@@ -3347,23 +3188,20 @@
idetape_create_mode_sense_cmd(&pc, IDETAPE_BLOCK_DESCRIPTOR);
if (idetape_queue_pc_tail(drive, &pc)) {
printk(KERN_ERR "ide-tape: Can't get block descriptor\n");
- if (tape->tape_block_size == 0) {
+ if (tape->blk_size == 0) {
printk(KERN_WARNING "ide-tape: Cannot deal with zero "
"block size, assuming 32k\n");
- tape->tape_block_size = 32768;
+ tape->blk_size = 32768;
}
return;
}
- tape->tape_block_size = (pc.buffer[4 + 5] << 16) +
+ tape->blk_size = (pc.buffer[4 + 5] << 16) +
(pc.buffer[4 + 6] << 8) +
pc.buffer[4 + 7];
tape->drv_write_prot = (pc.buffer[2] & 0x80) >> 7;
}
-/*
- * Our character device open function.
- */
-static int idetape_chrdev_open (struct inode *inode, struct file *filp)
+static int idetape_chrdev_open(struct inode *inode, struct file *filp)
{
unsigned int minor = iminor(inode), i = minor & ~0xc0;
ide_drive_t *drive;
@@ -3371,6 +3209,15 @@
idetape_pc_t pc;
int retval;
+ if (i >= MAX_HWIFS * MAX_DRIVES)
+ return -ENXIO;
+
+ tape = ide_tape_chrdev_get(i);
+ if (!tape)
+ return -ENXIO;
+
+ debug_log(DBG_CHRDEV, "Enter %s\n", __func__);
+
/*
* We really want to do nonseekable_open(inode, filp); here, but some
* versions of tar incorrectly call lseek on tapes and bail out if that
@@ -3378,16 +3225,6 @@
*/
filp->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE);
-#if IDETAPE_DEBUG_LOG
- printk(KERN_INFO "ide-tape: Reached idetape_chrdev_open\n");
-#endif /* IDETAPE_DEBUG_LOG */
-
- if (i >= MAX_HWIFS * MAX_DRIVES)
- return -ENXIO;
-
- if (!(tape = ide_tape_chrdev_get(i)))
- return -ENXIO;
-
drive = tape->drive;
filp->private_data = tape;
@@ -3408,7 +3245,7 @@
if (!test_bit(IDETAPE_ADDRESS_VALID, &tape->flags))
(void)idetape_rewind_tape(drive);
- if (tape->chrdev_direction != idetape_direction_read)
+ if (tape->chrdev_dir != IDETAPE_DIR_READ)
clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
/* Read block size and write protect status from drive. */
@@ -3430,10 +3267,8 @@
}
}
- /*
- * Lock the tape drive door so user can't eject.
- */
- if (tape->chrdev_direction == idetape_direction_none) {
+ /* Lock the tape drive door so user can't eject. */
+ if (tape->chrdev_dir == IDETAPE_DIR_NONE) {
if (idetape_create_prevent_cmd(drive, &pc, 1)) {
if (!idetape_queue_pc_tail(drive, &pc)) {
if (tape->door_locked != DOOR_EXPLICITLY_LOCKED)
@@ -3450,14 +3285,15 @@
return retval;
}
-static void idetape_write_release (ide_drive_t *drive, unsigned int minor)
+static void idetape_write_release(ide_drive_t *drive, unsigned int minor)
{
idetape_tape_t *tape = drive->driver_data;
idetape_empty_write_pipeline(drive);
tape->merge_stage = __idetape_kmalloc_stage(tape, 1, 0);
if (tape->merge_stage != NULL) {
- idetape_pad_zeros(drive, tape->tape_block_size * (tape->user_bs_factor - 1));
+ idetape_pad_zeros(drive, tape->blk_size *
+ (tape->user_bs_factor - 1));
__idetape_kfree_stage(tape->merge_stage);
tape->merge_stage = NULL;
}
@@ -3466,10 +3302,7 @@
idetape_flush_tape_buffers(drive);
}
-/*
- * Our character device release function.
- */
-static int idetape_chrdev_release (struct inode *inode, struct file *filp)
+static int idetape_chrdev_release(struct inode *inode, struct file *filp)
{
struct ide_tape_obj *tape = ide_tape_f(filp);
ide_drive_t *drive = tape->drive;
@@ -3478,14 +3311,12 @@
lock_kernel();
tape = drive->driver_data;
-#if IDETAPE_DEBUG_LOG
- if (tape->debug_level >= 3)
- printk(KERN_INFO "ide-tape: Reached idetape_chrdev_release\n");
-#endif /* IDETAPE_DEBUG_LOG */
- if (tape->chrdev_direction == idetape_direction_write)
+ debug_log(DBG_CHRDEV, "Enter %s\n", __func__);
+
+ if (tape->chrdev_dir == IDETAPE_DIR_WRITE)
idetape_write_release(drive, minor);
- if (tape->chrdev_direction == idetape_direction_read) {
+ if (tape->chrdev_dir == IDETAPE_DIR_READ) {
if (minor < 128)
idetape_discard_read_pipeline(drive, 1);
else
@@ -3497,7 +3328,7 @@
}
if (minor < 128 && test_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags))
(void) idetape_rewind_tape(drive);
- if (tape->chrdev_direction == idetape_direction_none) {
+ if (tape->chrdev_dir == IDETAPE_DIR_NONE) {
if (tape->door_locked == DOOR_LOCKED) {
if (idetape_create_prevent_cmd(drive, &pc, 0)) {
if (!idetape_queue_pc_tail(drive, &pc))
@@ -3512,37 +3343,39 @@
}
/*
- * idetape_identify_device is called to check the contents of the
- * ATAPI IDENTIFY command results. We return:
+ * check the contents of the ATAPI IDENTIFY command results. We return:
*
- * 1 If the tape can be supported by us, based on the information
- * we have so far.
+ * 1 - If the tape can be supported by us, based on the information we have so
+ * far.
*
- * 0 If this tape driver is not currently supported by us.
+ * 0 - If this tape driver is not currently supported by us.
*/
-static int idetape_identify_device (ide_drive_t *drive)
+static int idetape_identify_device(ide_drive_t *drive)
{
- struct idetape_id_gcw gcw;
- struct hd_driveid *id = drive->id;
+ u8 gcw[2], protocol, device_type, removable, packet_size;
if (drive->id_read == 0)
return 1;
- *((unsigned short *) &gcw) = id->config;
+ *((unsigned short *) &gcw) = drive->id->config;
+
+ protocol = (gcw[1] & 0xC0) >> 6;
+ device_type = gcw[1] & 0x1F;
+ removable = !!(gcw[0] & 0x80);
+ packet_size = gcw[0] & 0x3;
/* Check that we can support this device */
-
- if (gcw.protocol != 2)
+ if (protocol != 2)
printk(KERN_ERR "ide-tape: Protocol (0x%02x) is not ATAPI\n",
- gcw.protocol);
- else if (gcw.device_type != 1)
+ protocol);
+ else if (device_type != 1)
printk(KERN_ERR "ide-tape: Device type (0x%02x) is not set "
- "to tape\n", gcw.device_type);
- else if (!gcw.removable)
+ "to tape\n", device_type);
+ else if (!removable)
printk(KERN_ERR "ide-tape: The removable flag is not set\n");
- else if (gcw.packet_size != 0) {
- printk(KERN_ERR "ide-tape: Packet size (0x%02x) is not 12 "
- "bytes long\n", gcw.packet_size);
+ else if (packet_size != 0) {
+ printk(KERN_ERR "ide-tape: Packet size (0x%02x) is not 12"
+ " bytes\n", packet_size);
} else
return 1;
return 0;
@@ -3550,9 +3383,9 @@
static void idetape_get_inquiry_results(ide_drive_t *drive)
{
- char *r;
idetape_tape_t *tape = drive->driver_data;
idetape_pc_t pc;
+ char fw_rev[6], vendor_id[10], product_id[18];
idetape_create_inquiry_cmd(&pc);
if (idetape_queue_pc_tail(drive, &pc)) {
@@ -3560,27 +3393,23 @@
tape->name);
return;
}
- memcpy(tape->vendor_id, &pc.buffer[8], 8);
- memcpy(tape->product_id, &pc.buffer[16], 16);
- memcpy(tape->firmware_revision, &pc.buffer[32], 4);
+ memcpy(vendor_id, &pc.buffer[8], 8);
+ memcpy(product_id, &pc.buffer[16], 16);
+ memcpy(fw_rev, &pc.buffer[32], 4);
- ide_fixstring(tape->vendor_id, 10, 0);
- ide_fixstring(tape->product_id, 18, 0);
- ide_fixstring(tape->firmware_revision, 6, 0);
- r = tape->firmware_revision;
- if (*(r + 1) == '.')
- tape->firmware_revision_num = (*r - '0') * 100 +
- (*(r + 2) - '0') * 10 + *(r + 3) - '0';
+ ide_fixstring(vendor_id, 10, 0);
+ ide_fixstring(product_id, 18, 0);
+ ide_fixstring(fw_rev, 6, 0);
+
printk(KERN_INFO "ide-tape: %s <-> %s: %s %s rev %s\n",
- drive->name, tape->name, tape->vendor_id,
- tape->product_id, tape->firmware_revision);
+ drive->name, tape->name, vendor_id, product_id, fw_rev);
}
/*
* Ask the tape about its various parameters. In particular, we will adjust our
* data transfer buffer size to the recommended value as returned by the tape.
*/
-static void idetape_get_mode_sense_results (ide_drive_t *drive)
+static void idetape_get_mode_sense_results(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
idetape_pc_t pc;
@@ -3591,7 +3420,7 @@
if (idetape_queue_pc_tail(drive, &pc)) {
printk(KERN_ERR "ide-tape: Can't get tape parameters - assuming"
" some default values\n");
- tape->tape_block_size = 512;
+ tape->blk_size = 512;
put_unaligned(52, (u16 *)&tape->caps[12]);
put_unaligned(540, (u16 *)&tape->caps[14]);
put_unaligned(6*52, (u16 *)&tape->caps[16]);
@@ -3621,62 +3450,75 @@
memcpy(&tape->caps, caps, 20);
if (caps[7] & 0x02)
- tape->tape_block_size = 512;
+ tape->blk_size = 512;
else if (caps[7] & 0x04)
- tape->tape_block_size = 1024;
+ tape->blk_size = 1024;
}
#ifdef CONFIG_IDE_PROC_FS
-static void idetape_add_settings (ide_drive_t *drive)
+static void idetape_add_settings(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
-/*
- * drive setting name read/write data type min max mul_factor div_factor data pointer set function
- */
ide_add_setting(drive, "buffer", SETTING_READ, TYPE_SHORT, 0, 0xffff,
1, 2, (u16 *)&tape->caps[16], NULL);
- ide_add_setting(drive, "pipeline_min", SETTING_RW, TYPE_INT, 1, 0xffff, tape->stage_size / 1024, 1, &tape->min_pipeline, NULL);
- ide_add_setting(drive, "pipeline", SETTING_RW, TYPE_INT, 1, 0xffff, tape->stage_size / 1024, 1, &tape->max_stages, NULL);
- ide_add_setting(drive, "pipeline_max", SETTING_RW, TYPE_INT, 1, 0xffff, tape->stage_size / 1024, 1, &tape->max_pipeline, NULL);
- ide_add_setting(drive, "pipeline_used", SETTING_READ, TYPE_INT, 0, 0xffff, tape->stage_size / 1024, 1, &tape->nr_stages, NULL);
- ide_add_setting(drive, "pipeline_pending", SETTING_READ, TYPE_INT, 0, 0xffff, tape->stage_size / 1024, 1, &tape->nr_pending_stages, NULL);
+ ide_add_setting(drive, "pipeline_min", SETTING_RW, TYPE_INT, 1, 0xffff,
+ tape->stage_size / 1024, 1, &tape->min_pipeline, NULL);
+ ide_add_setting(drive, "pipeline", SETTING_RW, TYPE_INT, 1, 0xffff,
+ tape->stage_size / 1024, 1, &tape->max_stages, NULL);
+ ide_add_setting(drive, "pipeline_max", SETTING_RW, TYPE_INT, 1, 0xffff,
+ tape->stage_size / 1024, 1, &tape->max_pipeline, NULL);
+ ide_add_setting(drive, "pipeline_used", SETTING_READ, TYPE_INT, 0,
+ 0xffff, tape->stage_size / 1024, 1, &tape->nr_stages,
+ NULL);
+ ide_add_setting(drive, "pipeline_pending", SETTING_READ, TYPE_INT, 0,
+ 0xffff, tape->stage_size / 1024, 1,
+ &tape->nr_pending_stages, NULL);
ide_add_setting(drive, "speed", SETTING_READ, TYPE_SHORT, 0, 0xffff,
1, 1, (u16 *)&tape->caps[14], NULL);
- ide_add_setting(drive, "stage", SETTING_READ, TYPE_INT, 0, 0xffff, 1, 1024, &tape->stage_size, NULL);
- ide_add_setting(drive, "tdsc", SETTING_RW, TYPE_INT, IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX, 1000, HZ, &tape->best_dsc_rw_frequency, NULL);
- ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->dsc_overlap, NULL);
- ide_add_setting(drive, "pipeline_head_speed_c",SETTING_READ, TYPE_INT, 0, 0xffff, 1, 1, &tape->controlled_pipeline_head_speed, NULL);
- ide_add_setting(drive, "pipeline_head_speed_u",SETTING_READ, TYPE_INT, 0, 0xffff, 1, 1, &tape->uncontrolled_pipeline_head_speed,NULL);
- ide_add_setting(drive, "avg_speed", SETTING_READ, TYPE_INT, 0, 0xffff, 1, 1, &tape->avg_speed, NULL);
- ide_add_setting(drive, "debug_level", SETTING_RW, TYPE_INT, 0, 0xffff, 1, 1, &tape->debug_level, NULL);
+ ide_add_setting(drive, "stage", SETTING_READ, TYPE_INT, 0, 0xffff, 1,
+ 1024, &tape->stage_size, NULL);
+ ide_add_setting(drive, "tdsc", SETTING_RW, TYPE_INT, IDETAPE_DSC_RW_MIN,
+ IDETAPE_DSC_RW_MAX, 1000, HZ, &tape->best_dsc_rw_freq,
+ NULL);
+ ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1,
+ 1, &drive->dsc_overlap, NULL);
+ ide_add_setting(drive, "pipeline_head_speed_c", SETTING_READ, TYPE_INT,
+ 0, 0xffff, 1, 1, &tape->controlled_pipeline_head_speed,
+ NULL);
+ ide_add_setting(drive, "pipeline_head_speed_u", SETTING_READ, TYPE_INT,
+ 0, 0xffff, 1, 1,
+ &tape->uncontrolled_pipeline_head_speed, NULL);
+ ide_add_setting(drive, "avg_speed", SETTING_READ, TYPE_INT, 0, 0xffff,
+ 1, 1, &tape->avg_speed, NULL);
+ ide_add_setting(drive, "debug_mask", SETTING_RW, TYPE_INT, 0, 0xffff, 1,
+ 1, &tape->debug_mask, NULL);
}
#else
static inline void idetape_add_settings(ide_drive_t *drive) { ; }
#endif
/*
- * ide_setup is called to:
+ * The function below is called to:
*
- * 1. Initialize our various state variables.
- * 2. Ask the tape for its capabilities.
- * 3. Allocate a buffer which will be used for data
- * transfer. The buffer size is chosen based on
- * the recommendation which we received in step (2).
+ * 1. Initialize our various state variables.
+ * 2. Ask the tape for its capabilities.
+ * 3. Allocate a buffer which will be used for data transfer. The buffer size
+ * is chosen based on the recommendation which we received in step 2.
*
- * Note that at this point ide.c already assigned us an irq, so that
- * we can queue requests here and wait for their completion.
+ * Note that at this point ide.c already assigned us an irq, so that we can
+ * queue requests here and wait for their completion.
*/
-static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
+static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
{
unsigned long t1, tmid, tn, t;
int speed;
- struct idetape_id_gcw gcw;
int stage_size;
+ u8 gcw[2];
struct sysinfo si;
u16 *ctl = (u16 *)&tape->caps[12];
- spin_lock_init(&tape->spinlock);
+ spin_lock_init(&tape->lock);
drive->dsc_overlap = 1;
if (drive->hwif->host_flags & IDE_HFLAG_NO_DSC) {
printk(KERN_INFO "ide-tape: %s: disabling DSC overlap\n",
@@ -3690,25 +3532,29 @@
tape->name[0] = 'h';
tape->name[1] = 't';
tape->name[2] = '0' + minor;
- tape->chrdev_direction = idetape_direction_none;
+ tape->chrdev_dir = IDETAPE_DIR_NONE;
tape->pc = tape->pc_stack;
tape->max_insert_speed = 10000;
tape->speed_control = 1;
*((unsigned short *) &gcw) = drive->id->config;
- if (gcw.drq_type == 1)
+
+ /* Command packet DRQ type */
+ if (((gcw[0] & 0x60) >> 5) == 1)
set_bit(IDETAPE_DRQ_INTERRUPT, &tape->flags);
- tape->min_pipeline = tape->max_pipeline = tape->max_stages = 10;
-
+ tape->min_pipeline = 10;
+ tape->max_pipeline = 10;
+ tape->max_stages = 10;
+
idetape_get_inquiry_results(drive);
idetape_get_mode_sense_results(drive);
ide_tape_get_bsize_from_bdesc(drive);
tape->user_bs_factor = 1;
- tape->stage_size = *ctl * tape->tape_block_size;
+ tape->stage_size = *ctl * tape->blk_size;
while (tape->stage_size > 0xffff) {
printk(KERN_NOTICE "ide-tape: decreasing stage size\n");
*ctl /= 2;
- tape->stage_size = *ctl * tape->tape_block_size;
+ tape->stage_size = *ctl * tape->blk_size;
}
stage_size = tape->stage_size;
tape->pages_per_stage = stage_size / PAGE_SIZE;
@@ -3722,17 +3568,22 @@
tape->max_stages = speed * 1000 * 10 / tape->stage_size;
- /*
- * Limit memory use for pipeline to 10% of physical memory
- */
+ /* Limit memory use for pipeline to 10% of physical memory */
si_meminfo(&si);
- if (tape->max_stages * tape->stage_size > si.totalram * si.mem_unit / 10)
- tape->max_stages = si.totalram * si.mem_unit / (10 * tape->stage_size);
+ if (tape->max_stages * tape->stage_size >
+ si.totalram * si.mem_unit / 10)
+ tape->max_stages =
+ si.totalram * si.mem_unit / (10 * tape->stage_size);
+
tape->max_stages = min(tape->max_stages, IDETAPE_MAX_PIPELINE_STAGES);
tape->min_pipeline = min(tape->max_stages, IDETAPE_MIN_PIPELINE_STAGES);
- tape->max_pipeline = min(tape->max_stages * 2, IDETAPE_MAX_PIPELINE_STAGES);
- if (tape->max_stages == 0)
- tape->max_stages = tape->min_pipeline = tape->max_pipeline = 1;
+ tape->max_pipeline =
+ min(tape->max_stages * 2, IDETAPE_MAX_PIPELINE_STAGES);
+ if (tape->max_stages == 0) {
+ tape->max_stages = 1;
+ tape->min_pipeline = 1;
+ tape->max_pipeline = 1;
+ }
t1 = (tape->stage_size * HZ) / (speed * 1000);
tmid = (*(u16 *)&tape->caps[16] * 32 * HZ) / (speed * 125);
@@ -3744,17 +3595,19 @@
t = t1;
/*
- * Ensure that the number we got makes sense; limit
- * it within IDETAPE_DSC_RW_MIN and IDETAPE_DSC_RW_MAX.
+ * Ensure that the number we got makes sense; limit it within
+ * IDETAPE_DSC_RW_MIN and IDETAPE_DSC_RW_MAX.
*/
- tape->best_dsc_rw_frequency = max_t(unsigned long, min_t(unsigned long, t, IDETAPE_DSC_RW_MAX), IDETAPE_DSC_RW_MIN);
+ tape->best_dsc_rw_freq = max_t(unsigned long,
+ min_t(unsigned long, t, IDETAPE_DSC_RW_MAX),
+ IDETAPE_DSC_RW_MIN);
printk(KERN_INFO "ide-tape: %s <-> %s: %dKBps, %d*%dkB buffer, "
"%dkB pipeline, %lums tDSC%s\n",
drive->name, tape->name, *(u16 *)&tape->caps[14],
(*(u16 *)&tape->caps[16] * 512) / tape->stage_size,
tape->stage_size / 1024,
tape->max_stages * tape->stage_size / 1024,
- tape->best_dsc_rw_frequency * 1000 / HZ,
+ tape->best_dsc_rw_freq * 1000 / HZ,
drive->using_dma ? ", DMA":"");
idetape_add_settings(drive);
@@ -3782,7 +3635,8 @@
drive->dsc_overlap = 0;
drive->driver_data = NULL;
device_destroy(idetape_sysfs_class, MKDEV(IDETAPE_MAJOR, tape->minor));
- device_destroy(idetape_sysfs_class, MKDEV(IDETAPE_MAJOR, tape->minor + 128));
+ device_destroy(idetape_sysfs_class,
+ MKDEV(IDETAPE_MAJOR, tape->minor + 128));
idetape_devs[tape->minor] = NULL;
g->private_data = NULL;
put_disk(g);
@@ -3831,9 +3685,7 @@
#endif
};
-/*
- * Our character device supporting functions, passed to register_chrdev.
- */
+/* Our character device supporting functions, passed to register_chrdev. */
static const struct file_operations idetape_fops = {
.owner = THIS_MODULE,
.read = idetape_chrdev_read,
@@ -3848,7 +3700,8 @@
struct gendisk *disk = inode->i_bdev->bd_disk;
struct ide_tape_obj *tape;
- if (!(tape = ide_tape_get(disk)))
+ tape = ide_tape_get(disk);
+ if (!tape)
return -ENXIO;
return 0;
@@ -3895,21 +3748,20 @@
goto failed;
if (drive->media != ide_tape)
goto failed;
- if (!idetape_identify_device (drive)) {
- printk(KERN_ERR "ide-tape: %s: not supported by this version of ide-tape\n", drive->name);
+ if (!idetape_identify_device(drive)) {
+ printk(KERN_ERR "ide-tape: %s: not supported by this version of"
+ " the driver\n", drive->name);
goto failed;
}
if (drive->scsi) {
- printk("ide-tape: passing drive %s to ide-scsi emulation.\n", drive->name);
+ printk(KERN_INFO "ide-tape: passing drive %s to ide-scsi"
+ " emulation.\n", drive->name);
goto failed;
}
- if (strstr(drive->id->model, "OnStream DI-")) {
- printk(KERN_WARNING "ide-tape: Use drive %s with ide-scsi emulation and osst.\n", drive->name);
- printk(KERN_WARNING "ide-tape: OnStream support will be removed soon from ide-tape!\n");
- }
- tape = kzalloc(sizeof (idetape_tape_t), GFP_KERNEL);
+ tape = kzalloc(sizeof(idetape_tape_t), GFP_KERNEL);
if (tape == NULL) {
- printk(KERN_ERR "ide-tape: %s: Can't allocate a tape structure\n", drive->name);
+ printk(KERN_ERR "ide-tape: %s: Can't allocate a tape struct\n",
+ drive->name);
goto failed;
}
@@ -3955,10 +3807,7 @@
return -ENODEV;
}
-MODULE_DESCRIPTION("ATAPI Streaming TAPE Driver");
-MODULE_LICENSE("GPL");
-
-static void __exit idetape_exit (void)
+static void __exit idetape_exit(void)
{
driver_unregister(&idetape_driver.gen_driver);
class_destroy(idetape_sysfs_class);
@@ -3977,7 +3826,8 @@
}
if (register_chrdev(IDETAPE_MAJOR, "ht", &idetape_fops)) {
- printk(KERN_ERR "ide-tape: Failed to register character device interface\n");
+ printk(KERN_ERR "ide-tape: Failed to register chrdev"
+ " interface\n");
error = -EBUSY;
goto out_free_class;
}
@@ -4000,3 +3850,5 @@
module_init(idetape_init);
module_exit(idetape_exit);
MODULE_ALIAS_CHARDEV_MAJOR(IDETAPE_MAJOR);
+MODULE_DESCRIPTION("ATAPI Streaming TAPE Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index 4e1da1c..0518a2e 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -189,12 +189,11 @@
*/
static ide_startstop_t set_multmode_intr(ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- u8 stat;
+ u8 stat = ide_read_status(drive);
- if (OK_STAT(stat = hwif->INB(IDE_STATUS_REG),READY_STAT,BAD_STAT)) {
+ if (OK_STAT(stat, READY_STAT, BAD_STAT))
drive->mult_count = drive->mult_req;
- } else {
+ else {
drive->mult_req = drive->mult_count = 0;
drive->special.b.recalibrate = 1;
(void) ide_dump_status(drive, "set_multmode", stat);
@@ -207,11 +206,10 @@
*/
static ide_startstop_t set_geometry_intr(ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
int retries = 5;
u8 stat;
- while (((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) && retries--)
+ while (((stat = ide_read_status(drive)) & BUSY_STAT) && retries--)
udelay(10);
if (OK_STAT(stat, READY_STAT, BAD_STAT))
@@ -230,10 +228,9 @@
*/
static ide_startstop_t recal_intr(ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- u8 stat;
+ u8 stat = ide_read_status(drive);
- if (!OK_STAT(stat = hwif->INB(IDE_STATUS_REG), READY_STAT, BAD_STAT))
+ if (!OK_STAT(stat, READY_STAT, BAD_STAT))
return ide_error(drive, "recal_intr", stat);
return ide_stopped;
}
@@ -244,23 +241,23 @@
static ide_startstop_t task_no_data_intr(ide_drive_t *drive)
{
ide_task_t *args = HWGROUP(drive)->rq->special;
- ide_hwif_t *hwif = HWIF(drive);
u8 stat;
local_irq_enable_in_hardirq();
- if (!OK_STAT(stat = hwif->INB(IDE_STATUS_REG),READY_STAT,BAD_STAT)) {
+ stat = ide_read_status(drive);
+
+ if (!OK_STAT(stat, READY_STAT, BAD_STAT))
return ide_error(drive, "task_no_data_intr", stat);
/* calls ide_end_drive_cmd */
- }
+
if (args)
- ide_end_drive_cmd(drive, stat, hwif->INB(IDE_ERROR_REG));
+ ide_end_drive_cmd(drive, stat, ide_read_error(drive));
return ide_stopped;
}
static u8 wait_drive_not_busy(ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
int retries;
u8 stat;
@@ -269,7 +266,9 @@
* This can take up to 10 usec, but we will wait max 1 ms.
*/
for (retries = 0; retries < 100; retries++) {
- if ((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT)
+ stat = ide_read_status(drive);
+
+ if (stat & BUSY_STAT)
udelay(10);
else
break;
@@ -408,7 +407,7 @@
void task_end_request(ide_drive_t *drive, struct request *rq, u8 stat)
{
if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) {
- u8 err = drive->hwif->INB(IDE_ERROR_REG);
+ u8 err = ide_read_error(drive);
ide_end_drive_cmd(drive, stat, err);
return;
@@ -430,7 +429,7 @@
{
ide_hwif_t *hwif = drive->hwif;
struct request *rq = HWGROUP(drive)->rq;
- u8 stat = hwif->INB(IDE_STATUS_REG);
+ u8 stat = ide_read_status(drive);
/* new way for dealing with premature shared PCI interrupts */
if (!OK_STAT(stat, DRQ_STAT, BAD_R_STAT)) {
@@ -465,7 +464,7 @@
{
ide_hwif_t *hwif = drive->hwif;
struct request *rq = HWGROUP(drive)->rq;
- u8 stat = hwif->INB(IDE_STATUS_REG);
+ u8 stat = ide_read_status(drive);
if (!OK_STAT(stat, DRIVE_READY, drive->bad_wstat))
return task_error(drive, rq, __FUNCTION__, stat);
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index ac61360..ad0e995 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -618,60 +618,6 @@
EXPORT_SYMBOL(ide_unregister);
-
-/**
- * ide_setup_ports - set up IDE interface ports
- * @hw: register descriptions
- * @base: base register
- * @offsets: table of register offsets
- * @ctrl: control register
- * @ack_irq: IRQ ack
- * @irq: interrupt lie
- *
- * Setup hw_regs_t structure described by parameters. You
- * may set up the hw structure yourself OR use this routine to
- * do it for you. This is basically a helper
- *
- */
-
-void ide_setup_ports ( hw_regs_t *hw,
- unsigned long base, int *offsets,
- unsigned long ctrl, unsigned long intr,
- ide_ack_intr_t *ack_intr,
-/*
- * ide_io_ops_t *iops,
- */
- int irq)
-{
- int i;
-
- memset(hw, 0, sizeof(hw_regs_t));
- for (i = 0; i < IDE_NR_PORTS; i++) {
- if (offsets[i] == -1) {
- switch(i) {
- case IDE_CONTROL_OFFSET:
- hw->io_ports[i] = ctrl;
- break;
-#if defined(CONFIG_AMIGA) || defined(CONFIG_MAC)
- case IDE_IRQ_OFFSET:
- hw->io_ports[i] = intr;
- break;
-#endif /* (CONFIG_AMIGA) || (CONFIG_MAC) */
- default:
- hw->io_ports[i] = 0;
- break;
- }
- } else {
- hw->io_ports[i] = base + offsets[i];
- }
- }
- hw->irq = irq;
- hw->ack_intr = ack_intr;
-/*
- * hw->iops = iops;
- */
-}
-
void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw)
{
memcpy(hwif->io_ports, hw->io_ports, sizeof(hwif->io_ports));
diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c
index 8bdb79d..50ffa87 100644
--- a/drivers/ide/legacy/buddha.c
+++ b/drivers/ide/legacy/buddha.c
@@ -56,31 +56,11 @@
XSURF_BASE1, XSURF_BASE2
};
-
/*
* Offsets from one of the above bases
*/
-#define BUDDHA_DATA 0x00
-#define BUDDHA_ERROR 0x06 /* see err-bits */
-#define BUDDHA_NSECTOR 0x0a /* nr of sectors to read/write */
-#define BUDDHA_SECTOR 0x0e /* starting sector */
-#define BUDDHA_LCYL 0x12 /* starting cylinder */
-#define BUDDHA_HCYL 0x16 /* high byte of starting cyl */
-#define BUDDHA_SELECT 0x1a /* 101dhhhh , d=drive, hhhh=head */
-#define BUDDHA_STATUS 0x1e /* see status-bits */
#define BUDDHA_CONTROL 0x11a
-#define XSURF_CONTROL -1 /* X-Surf has no CS1* (Control/AltStat) */
-
-static int buddha_offsets[IDE_NR_PORTS] __initdata = {
- BUDDHA_DATA, BUDDHA_ERROR, BUDDHA_NSECTOR, BUDDHA_SECTOR, BUDDHA_LCYL,
- BUDDHA_HCYL, BUDDHA_SELECT, BUDDHA_STATUS, BUDDHA_CONTROL, -1
-};
-
-static int xsurf_offsets[IDE_NR_PORTS] __initdata = {
- BUDDHA_DATA, BUDDHA_ERROR, BUDDHA_NSECTOR, BUDDHA_SECTOR, BUDDHA_LCYL,
- BUDDHA_HCYL, BUDDHA_SELECT, BUDDHA_STATUS, XSURF_CONTROL, -1
-};
/*
* Other registers
@@ -140,6 +120,26 @@
return 1;
}
+static void __init buddha_setup_ports(hw_regs_t *hw, unsigned long base,
+ unsigned long ctl, unsigned long irq_port,
+ ide_ack_intr_t *ack_intr)
+{
+ int i;
+
+ memset(hw, 0, sizeof(*hw));
+
+ hw->io_ports[IDE_DATA_OFFSET] = base;
+
+ for (i = 1; i < 8; i++)
+ hw->io_ports[i] = base + 2 + i * 4;
+
+ hw->io_ports[IDE_CONTROL_OFFSET] = ctl;
+ hw->io_ports[IDE_IRQ_OFFSET] = irq_port;
+
+ hw->irq = IRQ_AMIGA_PORTS;
+ hw->ack_intr = ack_intr;
+}
+
/*
* Probe for a Buddha or Catweasel IDE interface
*/
@@ -202,22 +202,24 @@
printk(KERN_INFO "ide: %s IDE controller\n",
buddha_board_name[type]);
- for(i=0;i<buddha_num_hwifs;i++) {
- if(type != BOARD_XSURF) {
- ide_setup_ports(&hw, (buddha_board+buddha_bases[i]),
- buddha_offsets, 0,
- (buddha_board+buddha_irqports[i]),
- buddha_ack_intr,
-// budda_iops,
- IRQ_AMIGA_PORTS);
+ for (i = 0; i < buddha_num_hwifs; i++) {
+ unsigned long base, ctl, irq_port;
+ ide_ack_intr_t *ack_intr;
+
+ if (type != BOARD_XSURF) {
+ base = buddha_board + buddha_bases[i];
+ ctl = base + BUDDHA_CONTROL;
+ irq_port = buddha_board + buddha_irqports[i];
+ ack_intr = buddha_ack_intr;
} else {
- ide_setup_ports(&hw, (buddha_board+xsurf_bases[i]),
- xsurf_offsets, 0,
- (buddha_board+xsurf_irqports[i]),
- xsurf_ack_intr,
-// xsurf_iops,
- IRQ_AMIGA_PORTS);
- }
+ base = buddha_board + xsurf_bases[i];
+ /* X-Surf has no CS1* (Control/AltStat) */
+ ctl = 0;
+ irq_port = buddha_board + xsurf_irqports[i];
+ ack_intr = xsurf_ack_intr;
+ }
+
+ buddha_setup_ports(&hw, base, ctl, irq_port, ack_intr);
hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]);
if (hwif) {
diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c
index 85b69a8..f044048 100644
--- a/drivers/ide/legacy/falconide.c
+++ b/drivers/ide/legacy/falconide.c
@@ -33,22 +33,8 @@
* Offsets from the above base
*/
-#define ATA_HD_DATA 0x00
-#define ATA_HD_ERROR 0x05 /* see err-bits */
-#define ATA_HD_NSECTOR 0x09 /* nr of sectors to read/write */
-#define ATA_HD_SECTOR 0x0d /* starting sector */
-#define ATA_HD_LCYL 0x11 /* starting cylinder */
-#define ATA_HD_HCYL 0x15 /* high byte of starting cyl */
-#define ATA_HD_SELECT 0x19 /* 101dhhhh , d=drive, hhhh=head */
-#define ATA_HD_STATUS 0x1d /* see status-bits */
#define ATA_HD_CONTROL 0x39
-static int falconide_offsets[IDE_NR_PORTS] __initdata = {
- ATA_HD_DATA, ATA_HD_ERROR, ATA_HD_NSECTOR, ATA_HD_SECTOR, ATA_HD_LCYL,
- ATA_HD_HCYL, ATA_HD_SELECT, ATA_HD_STATUS, ATA_HD_CONTROL, -1
-};
-
-
/*
* falconide_intr_lock is used to obtain access to the IDE interrupt,
* which is shared between several drivers.
@@ -57,6 +43,22 @@
int falconide_intr_lock;
EXPORT_SYMBOL(falconide_intr_lock);
+static void __init falconide_setup_ports(hw_regs_t *hw)
+{
+ int i;
+
+ memset(hw, 0, sizeof(*hw));
+
+ hw->io_ports[IDE_DATA_OFFSET] = ATA_HD_BASE;
+
+ for (i = 1; i < 8; i++)
+ hw->io_ports[i] = ATA_HD_BASE + 1 + i * 4;
+
+ hw->io_ports[IDE_CONTROL_OFFSET] = ATA_HD_CONTROL;
+
+ hw->irq = IRQ_MFP_IDE;
+ hw->ack_intr = NULL;
+}
/*
* Probe for a Falcon IDE interface
@@ -64,16 +66,15 @@
static int __init falconide_init(void)
{
- if (MACH_IS_ATARI && ATARIHW_PRESENT(IDE)) {
hw_regs_t hw;
ide_hwif_t *hwif;
+ if (!MACH_IS_ATARI || !ATARIHW_PRESENT(IDE))
+ return 0;
+
printk(KERN_INFO "ide: Falcon IDE controller\n");
- ide_setup_ports(&hw, ATA_HD_BASE, falconide_offsets,
- 0, 0, NULL,
-// falconide_iops,
- IRQ_MFP_IDE);
+ falconide_setup_ports(&hw);
hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]);
if (hwif) {
@@ -85,9 +86,8 @@
ide_device_add(idx, NULL);
}
- }
- return 0;
+ return 0;
}
module_init(falconide_init);
diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c
index fc29ce7..9d3851d 100644
--- a/drivers/ide/legacy/gayle.c
+++ b/drivers/ide/legacy/gayle.c
@@ -34,22 +34,8 @@
* Offsets from one of the above bases
*/
-#define GAYLE_DATA 0x00
-#define GAYLE_ERROR 0x06 /* see err-bits */
-#define GAYLE_NSECTOR 0x0a /* nr of sectors to read/write */
-#define GAYLE_SECTOR 0x0e /* starting sector */
-#define GAYLE_LCYL 0x12 /* starting cylinder */
-#define GAYLE_HCYL 0x16 /* high byte of starting cyl */
-#define GAYLE_SELECT 0x1a /* 101dhhhh , d=drive, hhhh=head */
-#define GAYLE_STATUS 0x1e /* see status-bits */
#define GAYLE_CONTROL 0x101a
-static int gayle_offsets[IDE_NR_PORTS] __initdata = {
- GAYLE_DATA, GAYLE_ERROR, GAYLE_NSECTOR, GAYLE_SECTOR, GAYLE_LCYL,
- GAYLE_HCYL, GAYLE_SELECT, GAYLE_STATUS, -1, -1
-};
-
-
/*
* These are at different offsets from the base
*/
@@ -106,6 +92,26 @@
return 1;
}
+static void __init gayle_setup_ports(hw_regs_t *hw, unsigned long base,
+ unsigned long ctl, unsigned long irq_port,
+ ide_ack_intr_t *ack_intr);
+{
+ int i;
+
+ memset(hw, 0, sizeof(*hw));
+
+ hw->io_ports[IDE_DATA_OFFSET] = base;
+
+ for (i = 1; i < 8; i++)
+ hw->io_ports[i] = base + 2 + i * 4;
+
+ hw->io_ports[IDE_CONTROL_OFFSET] = ctl;
+ hw->io_ports[IDE_IRQ_OFFSET] = irq_port;
+
+ hw->irq = IRQ_AMIGA_PORTS;
+ hw->ack_intr = ack_intr;
+}
+
/*
* Probe for a Gayle IDE interface (and optionally for an IDE doubler)
*/
@@ -167,10 +173,7 @@
base = (unsigned long)ZTWO_VADDR(phys_base);
ctrlport = GAYLE_HAS_CONTROL_REG ? (base + GAYLE_CONTROL) : 0;
- ide_setup_ports(&hw, base, gayle_offsets,
- ctrlport, irqport, ack_intr,
-// &gayle_iops,
- IRQ_AMIGA_PORTS);
+ gayle_setup_ports(&hw, base, ctrlport, irqport, ack_intr);
hwif = ide_find_port(base);
if (hwif) {
diff --git a/drivers/ide/legacy/hd.c b/drivers/ide/legacy/hd.c
index 8e05d88..0b0d867 100644
--- a/drivers/ide/legacy/hd.c
+++ b/drivers/ide/legacy/hd.c
@@ -421,11 +421,14 @@
static inline int wait_DRQ(void)
{
- int retries = 100000, stat;
+ int retries;
+ int stat;
- while (--retries > 0)
- if ((stat = inb_p(HD_STATUS)) & DRQ_STAT)
+ for (retries = 0; retries < 100000; retries++) {
+ stat = inb_p(HD_STATUS);
+ if (stat & DRQ_STAT)
return 0;
+ }
dump_status("wait_DRQ", stat);
return -1;
}
diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c
index 06df8df..a61e607 100644
--- a/drivers/ide/legacy/macide.c
+++ b/drivers/ide/legacy/macide.c
@@ -31,14 +31,6 @@
* These match MkLinux so they should be correct.
*/
-#define IDE_DATA 0x00
-#define IDE_ERROR 0x04 /* see err-bits */
-#define IDE_NSECTOR 0x08 /* nr of sectors to read/write */
-#define IDE_SECTOR 0x0c /* starting sector */
-#define IDE_LCYL 0x10 /* starting cylinder */
-#define IDE_HCYL 0x14 /* high byte of starting cyl */
-#define IDE_SELECT 0x18 /* 101dhhhh , d=drive, hhhh=head */
-#define IDE_STATUS 0x1c /* see status-bits */
#define IDE_CONTROL 0x38 /* control/altstatus */
/*
@@ -63,11 +55,6 @@
volatile unsigned char *ide_ifr = (unsigned char *) (IDE_BASE + IDE_IFR);
-static int macide_offsets[IDE_NR_PORTS] = {
- IDE_DATA, IDE_ERROR, IDE_NSECTOR, IDE_SECTOR, IDE_LCYL,
- IDE_HCYL, IDE_SELECT, IDE_STATUS, IDE_CONTROL
-};
-
int macide_ack_intr(ide_hwif_t* hwif)
{
if (*ide_ifr & 0x20) {
@@ -77,6 +64,22 @@
return 0;
}
+static void __init macide_setup_ports(hw_regs_t *hw, unsigned long base,
+ int irq, ide_ack_intr_t *ack_intr)
+{
+ int i;
+
+ memset(hw, 0, sizeof(*hw));
+
+ for (i = 0; i < 8; i++)
+ hw->io_ports[i] = base + i * 4;
+
+ hw->io_ports[IDE_CONTROL_OFFSET] = IDE_CONTROL;
+
+ hw->irq = irq;
+ hw->ack_intr = ack_intr;
+}
+
static const char *mac_ide_name[] =
{ "Quadra", "Powerbook", "Powerbook Baboon" };
@@ -86,27 +89,27 @@
static int __init macide_init(void)
{
- hw_regs_t hw;
ide_hwif_t *hwif;
+ ide_ack_intr_t *ack_intr;
+ unsigned long base;
+ int irq;
+ hw_regs_t hw;
switch (macintosh_config->ide_type) {
case MAC_IDE_QUADRA:
- ide_setup_ports(&hw, IDE_BASE, macide_offsets,
- 0, 0, macide_ack_intr,
-// quadra_ide_iops,
- IRQ_NUBUS_F);
+ base = IDE_BASE;
+ ack_intr = macide_ack_intr;
+ irq = IRQ_NUBUS_F;
break;
case MAC_IDE_PB:
- ide_setup_ports(&hw, IDE_BASE, macide_offsets,
- 0, 0, macide_ack_intr,
-// macide_pb_iops,
- IRQ_NUBUS_C);
+ base = IDE_BASE;
+ ack_intr = macide_ack_intr;
+ irq = IRQ_NUBUS_C;
break;
case MAC_IDE_BABOON:
- ide_setup_ports(&hw, BABOON_BASE, macide_offsets,
- 0, 0, NULL,
-// macide_baboon_iops,
- IRQ_BABOON_1);
+ base = BABOON_BASE;
+ ack_intr = NULL;
+ irq = IRQ_BABOON_1;
break;
default:
return -ENODEV;
@@ -115,6 +118,8 @@
printk(KERN_INFO "ide: Macintosh %s IDE controller\n",
mac_ide_name[macintosh_config->ide_type - 1]);
+ macide_setup_ports(&hw, base, irq, ack_intr);
+
hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]);
if (hwif) {
u8 index = hwif->index;
diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c
index 2f0b34d..1381b91 100644
--- a/drivers/ide/legacy/q40ide.c
+++ b/drivers/ide/legacy/q40ide.c
@@ -66,16 +66,12 @@
/*
- * This is very similar to ide_setup_ports except that addresses
- * are pretranslated for q40 ISA access
+ * Addresses are pretranslated for Q40 ISA access.
*/
void q40_ide_setup_ports ( hw_regs_t *hw,
unsigned long base, int *offsets,
unsigned long ctrl, unsigned long intr,
ide_ack_intr_t *ack_intr,
-/*
- * ide_io_ops_t *iops,
- */
int irq)
{
int i;
@@ -92,9 +88,6 @@
hw->irq = irq;
hw->ack_intr = ack_intr;
-/*
- * hw->iops = iops;
- */
}
diff --git a/drivers/ide/pci/Makefile b/drivers/ide/pci/Makefile
index 9480325..02e6ee7 100644
--- a/drivers/ide/pci/Makefile
+++ b/drivers/ide/pci/Makefile
@@ -34,7 +34,8 @@
obj-$(CONFIG_BLK_DEV_VIA82CXXX) += via82cxxx.o
# Must appear at the end of the block
-obj-$(CONFIG_BLK_DEV_GENERIC) += generic.o
+obj-$(CONFIG_BLK_DEV_GENERIC) += ide-pci-generic.o
+ide-pci-generic-y += generic.o
ifeq ($(CONFIG_BLK_DEV_CMD640), m)
obj-m += cmd640.o
diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c
index 9262a91..7fd83a9 100644
--- a/drivers/ide/pci/generic.c
+++ b/drivers/ide/pci/generic.c
@@ -29,19 +29,6 @@
static int ide_generic_all; /* Set to claim all devices */
-/*
- * the module_param_named() was added for the modular case
- * the __setup() is left as compatibility for existing setups
- */
-#ifndef MODULE
-static int __init ide_generic_all_on(char *unused)
-{
- ide_generic_all = 1;
- printk(KERN_INFO "IDE generic will claim all unknown PCI IDE storage controllers.\n");
- return 1;
-}
-const __setup("all-generic-ide", ide_generic_all_on);
-#endif
module_param_named(all_generic_ide, ide_generic_all, bool, 0444);
MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE storage controllers.");
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index ef5b39f..cc4be96 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -704,9 +704,6 @@
hwif->sata_scr[SATA_STATUS_OFFSET] = base + 0x104;
hwif->sata_scr[SATA_ERROR_OFFSET] = base + 0x108;
hwif->sata_scr[SATA_CONTROL_OFFSET] = base + 0x100;
- hwif->sata_misc[SATA_MISC_OFFSET] = base + 0x140;
- hwif->sata_misc[SATA_PHY_OFFSET] = base + 0x144;
- hwif->sata_misc[SATA_IEN_OFFSET] = base + 0x148;
}
memcpy(hwif->io_ports, hw.io_ports, sizeof(hwif->io_ports));
diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c
index de9ebbf..9367882 100644
--- a/drivers/macintosh/mediabay.c
+++ b/drivers/macintosh/mediabay.c
@@ -78,12 +78,14 @@
int cached_gpio;
int sleeping;
struct semaphore lock;
-#ifdef CONFIG_BLK_DEV_IDE
+#ifdef CONFIG_BLK_DEV_IDE_PMAC
void __iomem *cd_base;
- int cd_index;
int cd_irq;
int cd_retry;
#endif
+#if defined(CONFIG_BLK_DEV_IDE_PMAC) || defined(CONFIG_MAC_FLOPPY)
+ int cd_index;
+#endif
};
#define MAX_BAYS 2
@@ -91,7 +93,7 @@
static struct media_bay_info media_bays[MAX_BAYS];
int media_bay_count = 0;
-#ifdef CONFIG_BLK_DEV_IDE
+#ifdef CONFIG_BLK_DEV_IDE_PMAC
/* check the busy bit in the media-bay ide interface
(assumes the media-bay contains an ide device) */
#define MB_IDE_READY(i) ((readb(media_bays[i].cd_base + 0x70) & 0x80) == 0)
@@ -401,7 +403,7 @@
set_mb_power(bay, id != MB_NO);
bay->content_id = id;
if (id == MB_NO) {
-#ifdef CONFIG_BLK_DEV_IDE
+#ifdef CONFIG_BLK_DEV_IDE_PMAC
bay->cd_retry = 0;
#endif
printk(KERN_INFO "media bay %d is empty\n", bay->index);
@@ -414,9 +416,9 @@
}
}
+#ifdef CONFIG_MAC_FLOPPY
int check_media_bay(struct device_node *which_bay, int what)
{
-#ifdef CONFIG_BLK_DEV_IDE
int i;
for (i=0; i<media_bay_count; i++)
@@ -426,14 +428,14 @@
media_bays[i].cd_index = -1;
return -EINVAL;
}
-#endif /* CONFIG_BLK_DEV_IDE */
return -ENODEV;
}
EXPORT_SYMBOL(check_media_bay);
+#endif /* CONFIG_MAC_FLOPPY */
+#ifdef CONFIG_BLK_DEV_IDE_PMAC
int check_media_bay_by_base(unsigned long base, int what)
{
-#ifdef CONFIG_BLK_DEV_IDE
int i;
for (i=0; i<media_bay_count; i++)
@@ -443,15 +445,13 @@
media_bays[i].cd_index = -1;
return -EINVAL;
}
-#endif
-
+
return -ENODEV;
}
int media_bay_set_ide_infos(struct device_node* which_bay, unsigned long base,
- int irq, int index)
+ int irq, int index)
{
-#ifdef CONFIG_BLK_DEV_IDE
int i;
for (i=0; i<media_bay_count; i++) {
@@ -483,10 +483,10 @@
return -ENODEV;
}
}
-#endif /* CONFIG_BLK_DEV_IDE */
-
+
return -ENODEV;
}
+#endif /* CONFIG_BLK_DEV_IDE_PMAC */
static void media_bay_step(int i)
{
@@ -521,14 +521,13 @@
bay->state = mb_resetting;
MBDBG("mediabay%d: waiting reset (kind:%d)\n", i, bay->content_id);
break;
-
case mb_resetting:
if (bay->content_id != MB_CD) {
MBDBG("mediabay%d: bay is up (kind:%d)\n", i, bay->content_id);
bay->state = mb_up;
break;
}
-#ifdef CONFIG_BLK_DEV_IDE
+#ifdef CONFIG_BLK_DEV_IDE_PMAC
MBDBG("mediabay%d: waiting IDE reset (kind:%d)\n", i, bay->content_id);
bay->ops->un_reset_ide(bay);
bay->timer = msecs_to_jiffies(MB_IDE_WAIT);
@@ -536,16 +535,14 @@
#else
printk(KERN_DEBUG "media-bay %d is ide (not compiled in kernel)\n", i);
set_mb_power(bay, 0);
-#endif /* CONFIG_BLK_DEV_IDE */
+#endif /* CONFIG_BLK_DEV_IDE_PMAC */
break;
-
-#ifdef CONFIG_BLK_DEV_IDE
+#ifdef CONFIG_BLK_DEV_IDE_PMAC
case mb_ide_resetting:
bay->timer = msecs_to_jiffies(MB_IDE_TIMEOUT);
bay->state = mb_ide_waiting;
MBDBG("mediabay%d: waiting IDE ready (kind:%d)\n", i, bay->content_id);
break;
-
case mb_ide_waiting:
if (bay->cd_base == NULL) {
bay->timer = 0;
@@ -587,11 +584,10 @@
bay->timer = 0;
}
break;
-#endif /* CONFIG_BLK_DEV_IDE */
-
+#endif /* CONFIG_BLK_DEV_IDE_PMAC */
case mb_powering_down:
bay->state = mb_empty;
-#ifdef CONFIG_BLK_DEV_IDE
+#ifdef CONFIG_BLK_DEV_IDE_PMAC
if (bay->cd_index >= 0) {
printk(KERN_DEBUG "Unregistering mb %d ide, index:%d\n", i,
bay->cd_index);
@@ -607,7 +603,7 @@
bay->content_id = MB_NO;
}
}
-#endif /* CONFIG_BLK_DEV_IDE */
+#endif /* CONFIG_BLK_DEV_IDE_PMAC */
MBDBG("mediabay%d: end of power down\n", i);
break;
}
@@ -739,7 +735,7 @@
bay->last_value = bay->content_id;
bay->value_count = msecs_to_jiffies(MB_STABLE_DELAY);
bay->timer = msecs_to_jiffies(MB_POWER_DELAY);
-#ifdef CONFIG_BLK_DEV_IDE
+#ifdef CONFIG_BLK_DEV_IDE_PMAC
bay->cd_retry = 0;
#endif
do {
@@ -829,7 +825,7 @@
for (i=0; i<MAX_BAYS; i++) {
memset((char *)&media_bays[i], 0, sizeof(struct media_bay_info));
media_bays[i].content_id = -1;
-#ifdef CONFIG_BLK_DEV_IDE
+#ifdef CONFIG_BLK_DEV_IDE_PMAC
media_bays[i].cd_index = -1;
#endif
}
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index 6c4f0f0..68e5c632 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -287,7 +287,7 @@
static ide_startstop_t
idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err)
{
- if (HWIF(drive)->INB(IDE_STATUS_REG) & (BUSY_STAT|DRQ_STAT))
+ if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT))
/* force an abort */
HWIF(drive)->OUTB(WIN_IDLEIMMEDIATE,IDE_COMMAND_REG);
@@ -423,7 +423,7 @@
}
/* Clear the interrupt */
- stat = drive->hwif->INB(IDE_STATUS_REG);
+ stat = ide_read_status(drive);
if ((stat & DRQ_STAT) == 0) {
/* No more interrupts */
diff --git a/include/asm-powerpc/mediabay.h b/include/asm-powerpc/mediabay.h
index 9daa325..de83fe1 100644
--- a/include/asm-powerpc/mediabay.h
+++ b/include/asm-powerpc/mediabay.h
@@ -18,14 +18,14 @@
#define MB_NO 7 /* media bay contains nothing */
int check_media_bay(struct device_node *which_bay, int what);
-int check_media_bay_by_base(unsigned long base, int what);
/* Number of bays in the machine or 0 */
extern int media_bay_count;
-/* called by pmac-ide.c to register IDE controller for media bay */
-extern int media_bay_set_ide_infos(struct device_node* which_bay,
- unsigned long base, int irq, int index);
+int check_media_bay_by_base(unsigned long base, int what);
+/* called by IDE PMAC host driver to register IDE controller for media bay */
+int media_bay_set_ide_infos(struct device_node *which_bay, unsigned long base,
+ int irq, int index);
#endif /* __KERNEL__ */
#endif /* _PPC_MEDIABAY_H */
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 367c170..acec99d 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -115,10 +115,6 @@
#define SATA_ERROR_OFFSET (1)
#define SATA_CONTROL_OFFSET (2)
-#define SATA_MISC_OFFSET (0)
-#define SATA_PHY_OFFSET (1)
-#define SATA_IEN_OFFSET (2)
-
/*
* Our Physical Region Descriptor (PRD) table should be large enough
* to handle the biggest I/O request we are likely to see. Since requests
@@ -173,7 +169,7 @@
ide_rz1000, ide_trm290,
ide_cmd646, ide_cy82c693, ide_4drives,
ide_pmac, ide_etrax100, ide_acorn,
- ide_au1xxx, ide_forced
+ ide_au1xxx, ide_palm3710, ide_forced
};
typedef u8 hwif_chipset_t;
@@ -198,17 +194,6 @@
int ide_register_hw(hw_regs_t *, void (*)(struct ide_drive_s *),
struct hwif_s **);
-void ide_setup_ports( hw_regs_t *hw,
- unsigned long base,
- int *offsets,
- unsigned long ctrl,
- unsigned long intr,
- ide_ack_intr_t *ack_intr,
-#if 0
- ide_io_ops_t *iops,
-#endif
- int irq);
-
static inline void ide_std_init_ports(hw_regs_t *hw,
unsigned long io_addr,
unsigned long ctl_addr)
@@ -473,7 +458,6 @@
/* task file registers for pata and sata */
unsigned long io_ports[IDE_NR_PORTS];
unsigned long sata_scr[SATA_NR_PORTS];
- unsigned long sata_misc[SATA_NR_PORTS];
ide_drive_t drives[MAX_DRIVES]; /* drive info */
@@ -1014,7 +998,8 @@
void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *, int, u8 *);
void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
-#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
+/* FIXME: palm_bk3710 uses BLK_DEV_IDEDMA_PCI without BLK_DEV_IDEPCI! */
+#if defined(CONFIG_BLK_DEV_IDEPCI) && defined(CONFIG_BLK_DEV_IDEDMA_PCI)
void ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *);
#else
static inline void ide_hwif_setup_dma(ide_hwif_t *hwif,
@@ -1324,4 +1309,25 @@
drive->hwif->OUTB(drive->ctl | (on ? 0 : 2), IDE_CONTROL_REG);
}
+static inline u8 ide_read_status(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+
+ return hwif->INB(hwif->io_ports[IDE_STATUS_OFFSET]);
+}
+
+static inline u8 ide_read_altstatus(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+
+ return hwif->INB(hwif->io_ports[IDE_CONTROL_OFFSET]);
+}
+
+static inline u8 ide_read_error(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+
+ return hwif->INB(hwif->io_ports[IDE_ERROR_OFFSET]);
+}
+
#endif /* _IDE_H */