[ARM] pxa: enable L2 if present in XSC3
Check whether L2 is present or not in XSC3. If it's present, enable L2
immediately.
Disabling L2 after L2 is enabled that would result in unpredicatable behavior
of XSC3 processor.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 96456f5..8e4f6dc 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -407,6 +407,13 @@
adr r5, xsc3_crval
ldmia r5, {r5, r6}
+
+#ifdef CONFIG_CACHE_XSC3L2
+ mrc p15, 1, r0, c0, c0, 1 @ get L2 present information
+ ands r0, r0, #0xf8
+ orrne r6, r6, #(1 << 26) @ enable L2 if present
+#endif
+
mrc p15, 0, r0, c1, c0, 0 @ get control register
bic r0, r0, r5 @ ..V. ..R. .... ..A.
orr r0, r0, r6 @ ..VI Z..S .... .C.M (mmu)