treewide: Fix typo in Kconfig
Correct spelling typo in Kconfig.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
index ca900be..0363dba 100644
--- a/arch/arm/mach-at91/Kconfig.non_dt
+++ b/arch/arm/mach-at91/Kconfig.non_dt
@@ -241,7 +241,7 @@
bool "PControl G20 CPU module"
help
Select this if you are using taskit's Stamp9G20 CPU module on this
- carrier board, beeing the decentralized unit of a building automation
+ carrier board, being the decentralized unit of a building automation
system; featuring nvram, eth-switch, iso-rs485, display, io
config MACH_GSIA18S
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 5c0ed72..96c52bb 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -948,7 +948,7 @@
depends on X86_32 && X86_MCE
---help---
Include support for machine check handling on old Pentium 5 or WinChip
- systems. These typically need to be enabled explicitely on the command
+ systems. These typically need to be enabled explicitly on the command
line.
config X86_MCE_THRESHOLD
diff --git a/drivers/isdn/mISDN/Kconfig b/drivers/isdn/mISDN/Kconfig
index 1747a02..c0730d5 100644
--- a/drivers/isdn/mISDN/Kconfig
+++ b/drivers/isdn/mISDN/Kconfig
@@ -17,7 +17,7 @@
This module may be used for special applications that require
cross connecting of bchannels, conferencing, dtmf decoding,
- echo cancelation, tone generation, and Blowfish encryption and
+ echo cancellation, tone generation, and Blowfish encryption and
decryption. It may use hardware features if available.
E.g. it is required for PBX4Linux. Go to http://isdn.eversberg.eu
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index fe25677..a2d61d0 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -204,9 +204,9 @@
Some devices support more than one LUN (Logical Unit Number) in order
to allow access to several media, e.g. CD jukebox, USB card reader,
mobile phone in mass storage mode. This option forces the kernel to
- probe for all LUNs by default. This setting can be overriden by
+ probe for all LUNs by default. This setting can be overridden by
max_luns boot/module parameter. Note that this option does not affect
- devices conforming to SCSI-3 or higher as they can explicitely report
+ devices conforming to SCSI-3 or higher as they can explicitly report
their number of LUNs. It is safe to say Y here unless you have one of
those rare devices which reacts in an unexpected way when probed for
multiple LUNs.
diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig
index 23eae5c..e8dc72c 100644
--- a/drivers/xen/Kconfig
+++ b/drivers/xen/Kconfig
@@ -223,7 +223,7 @@
To do that the driver parses the Power Management data and uploads
said information to the Xen hypervisor. Then the Xen hypervisor can
- select the proper Cx and Pxx states. It also registers itslef as the
+ select the proper Cx and Pxx states. It also registers itself as the
SMM so that other drivers (such as ACPI cpufreq scaling driver) will
not load.
diff --git a/net/netfilter/ipset/Kconfig b/net/netfilter/ipset/Kconfig
index ba36c28..95e7d62 100644
--- a/net/netfilter/ipset/Kconfig
+++ b/net/netfilter/ipset/Kconfig
@@ -21,7 +21,7 @@
You can define here default value of the maximum number
of IP sets for the kernel.
- The value can be overriden by the 'max_sets' module
+ The value can be overridden by the 'max_sets' module
parameter of the 'ip_set' module.
config IP_SET_BITMAP_IP