ne2k: convert to net_device_ops

Convert driver to new net_device_ops. Compile tested only.
This required some additional work to export common code ei_XXX.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/lib8390.c b/drivers/net/lib8390.c
index 9430167..46335af 100644
--- a/drivers/net/lib8390.c
+++ b/drivers/net/lib8390.c
@@ -108,14 +108,13 @@
 /* Index to functions. */
 static void ei_tx_intr(struct net_device *dev);
 static void ei_tx_err(struct net_device *dev);
-static void ei_tx_timeout(struct net_device *dev);
+void ei_tx_timeout(struct net_device *dev);
 static void ei_receive(struct net_device *dev);
 static void ei_rx_overrun(struct net_device *dev);
 
 /* Routines generic to NS8390-based boards. */
 static void NS8390_trigger_send(struct net_device *dev, unsigned int length,
 								int start_page);
-static void set_multicast_list(struct net_device *dev);
 static void do_set_multicast_list(struct net_device *dev);
 static void __NS8390_init(struct net_device *dev, int startp);
 
@@ -208,8 +207,10 @@
 
 	/* The card I/O part of the driver (e.g. 3c503) can hook a Tx timeout
 	    wrapper that does e.g. media check & then calls ei_tx_timeout. */
+#ifdef CONFIG_COMPAT_NET_DEV_OPS
 	if (dev->tx_timeout == NULL)
 		 dev->tx_timeout = ei_tx_timeout;
+#endif
 	if (dev->watchdog_timeo <= 0)
 		 dev->watchdog_timeo = TX_TIMEOUT;
 
@@ -258,7 +259,7 @@
  * completed (or failed) - i.e. never posted a Tx related interrupt.
  */
 
-static void ei_tx_timeout(struct net_device *dev)
+void ei_tx_timeout(struct net_device *dev)
 {
 	unsigned long e8390_base = dev->base_addr;
 	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
@@ -295,6 +296,7 @@
 	enable_irq_lockdep(dev->irq);
 	netif_wake_queue(dev);
 }
+EXPORT_SYMBOL_GPL(ei_tx_timeout);
 
 /**
  * ei_start_xmit - begin packet transmission
@@ -304,7 +306,7 @@
  * Sends a packet to an 8390 network device.
  */
 
-static int ei_start_xmit(struct sk_buff *skb, struct net_device *dev)
+int ei_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	unsigned long e8390_base = dev->base_addr;
 	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
@@ -421,6 +423,7 @@
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ei_start_xmit);
 
 /**
  * ei_interrupt - handle the interrupts from an 8390
@@ -882,7 +885,7 @@
  *	Collect the stats. This is called unlocked and from several contexts.
  */
 
-static struct net_device_stats *get_stats(struct net_device *dev)
+struct net_device_stats *ei_get_stats(struct net_device *dev)
 {
 	unsigned long ioaddr = dev->base_addr;
 	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
@@ -901,6 +904,7 @@
 
 	return &dev->stats;
 }
+EXPORT_SYMBOL_GPL(ei_get_stats);
 
 /*
  * Form the 64 bit 8390 multicast table from the linked list of addresses
@@ -991,7 +995,7 @@
  *	not called too often. Must protect against both bh and irq users
  */
 
-static void set_multicast_list(struct net_device *dev)
+void ei_set_multicast_list(struct net_device *dev)
 {
 	unsigned long flags;
 	struct ei_device *ei_local = (struct ei_device*)netdev_priv(dev);
@@ -1000,6 +1004,7 @@
 	do_set_multicast_list(dev);
 	spin_unlock_irqrestore(&ei_local->page_lock, flags);
 }
+EXPORT_SYMBOL_GPL(ei_set_multicast_list);
 
 /**
  * ethdev_setup - init rest of 8390 device struct
@@ -1015,10 +1020,11 @@
 	if (ei_debug > 1)
 		printk(version);
 
-	dev->hard_start_xmit = &ei_start_xmit;
-	dev->get_stats	= get_stats;
-	dev->set_multicast_list = &set_multicast_list;
-
+#ifdef CONFIG_COMPAT_NET_DEV_OPS
+	dev->hard_start_xmit = ei_start_xmit;
+	dev->get_stats	= ei_get_stats;
+	dev->set_multicast_list = ei_set_multicast_list;
+#endif
 	ether_setup(dev);
 
 	spin_lock_init(&ei_local->page_lock);