[PATCH] Have x86 use add_active_range() and free_area_init_nodes
Size zones and holes in an architecture independent manner for x86.
[akpm@osdl.org: build fix]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Keith Mannthey" <kmannth@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index 758044f..3fd9f1e 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -598,12 +598,10 @@
def_bool y
depends on ARCH_SPARSEMEM_ENABLE
-source "mm/Kconfig"
+config ARCH_POPULATES_NODE_MAP
+ def_bool y
-config HAVE_ARCH_EARLY_PFN_TO_NID
- bool
- default y
- depends on NUMA
+source "mm/Kconfig"
config HIGHPTE
bool "Allocate 3rd-level pagetables from highmem"
diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c
index 76a524b..814cdeb 100644
--- a/arch/i386/kernel/setup.c
+++ b/arch/i386/kernel/setup.c
@@ -1089,22 +1089,20 @@
void __init zone_sizes_init(void)
{
- unsigned long zones_size[MAX_NR_ZONES] = { 0, };
- unsigned int max_dma, low;
-
- max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
- low = max_low_pfn;
-
- if (low < max_dma)
- zones_size[ZONE_DMA] = low;
- else {
- zones_size[ZONE_DMA] = max_dma;
- zones_size[ZONE_NORMAL] = low - max_dma;
#ifdef CONFIG_HIGHMEM
- zones_size[ZONE_HIGHMEM] = highend_pfn - low;
+ unsigned long max_zone_pfns[MAX_NR_ZONES] = {
+ virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT,
+ max_low_pfn,
+ highend_pfn};
+ add_active_range(0, 0, highend_pfn);
+#else
+ unsigned long max_zone_pfns[MAX_NR_ZONES] = {
+ virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT,
+ max_low_pfn};
+ add_active_range(0, 0, max_low_pfn);
#endif
- }
- free_area_init(zones_size);
+
+ free_area_init_nodes(max_zone_pfns);
}
#else
extern unsigned long __init setup_memory(void);
diff --git a/arch/i386/kernel/srat.c b/arch/i386/kernel/srat.c
index 83db411..3241312 100644
--- a/arch/i386/kernel/srat.c
+++ b/arch/i386/kernel/srat.c
@@ -54,8 +54,6 @@
static struct node_memory_chunk_s node_memory_chunk[MAXCHUNKS];
static int num_memory_chunks; /* total number of memory chunks */
-static int zholes_size_init;
-static unsigned long zholes_size[MAX_NUMNODES * MAX_NR_ZONES];
extern void * boot_ioremap(unsigned long, unsigned long);
@@ -135,47 +133,6 @@
"enabled and removable" : "enabled" ) );
}
-/* Take a chunk of pages from page frame cstart to cend and count the number
- * of pages in each zone, returned via zones[].
- */
-static __init void chunk_to_zones(unsigned long cstart, unsigned long cend,
- unsigned long *zones)
-{
- unsigned long max_dma;
- extern unsigned long max_low_pfn;
-
- int z;
- unsigned long rend;
-
- /* FIXME: MAX_DMA_ADDRESS and max_low_pfn are trying to provide
- * similarly scoped information and should be handled in a consistant
- * manner.
- */
- max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
-
- /* Split the hole into the zones in which it falls. Repeatedly
- * take the segment in which the remaining hole starts, round it
- * to the end of that zone.
- */
- memset(zones, 0, MAX_NR_ZONES * sizeof(long));
- while (cstart < cend) {
- if (cstart < max_dma) {
- z = ZONE_DMA;
- rend = (cend < max_dma)? cend : max_dma;
-
- } else if (cstart < max_low_pfn) {
- z = ZONE_NORMAL;
- rend = (cend < max_low_pfn)? cend : max_low_pfn;
-
- } else {
- z = ZONE_HIGHMEM;
- rend = cend;
- }
- zones[z] += rend - cstart;
- cstart = rend;
- }
-}
-
/*
* The SRAT table always lists ascending addresses, so can always
* assume that the first "start" address that you see is the real
@@ -220,7 +177,6 @@
memset(pxm_bitmap, 0, sizeof(pxm_bitmap)); /* init proximity domain bitmap */
memset(node_memory_chunk, 0, sizeof(node_memory_chunk));
- memset(zholes_size, 0, sizeof(zholes_size));
num_memory_chunks = 0;
while (p < end) {
@@ -284,6 +240,7 @@
printk("chunk %d nid %d start_pfn %08lx end_pfn %08lx\n",
j, chunk->nid, chunk->start_pfn, chunk->end_pfn);
node_read_chunk(chunk->nid, chunk);
+ add_active_range(chunk->nid, chunk->start_pfn, chunk->end_pfn);
}
for_each_online_node(nid) {
@@ -392,57 +349,7 @@
return acpi20_parse_srat((struct acpi_table_srat *)header);
}
out_err:
+ remove_all_active_ranges();
printk("failed to get NUMA memory information from SRAT table\n");
return 0;
}
-
-/* For each node run the memory list to determine whether there are
- * any memory holes. For each hole determine which ZONE they fall
- * into.
- *
- * NOTE#1: this requires knowledge of the zone boundries and so
- * _cannot_ be performed before those are calculated in setup_memory.
- *
- * NOTE#2: we rely on the fact that the memory chunks are ordered by
- * start pfn number during setup.
- */
-static void __init get_zholes_init(void)
-{
- int nid;
- int c;
- int first;
- unsigned long end = 0;
-
- for_each_online_node(nid) {
- first = 1;
- for (c = 0; c < num_memory_chunks; c++){
- if (node_memory_chunk[c].nid == nid) {
- if (first) {
- end = node_memory_chunk[c].end_pfn;
- first = 0;
-
- } else {
- /* Record any gap between this chunk
- * and the previous chunk on this node
- * against the zones it spans.
- */
- chunk_to_zones(end,
- node_memory_chunk[c].start_pfn,
- &zholes_size[nid * MAX_NR_ZONES]);
- }
- }
- }
- }
-}
-
-unsigned long * __init get_zholes_size(int nid)
-{
- if (!zholes_size_init) {
- zholes_size_init++;
- get_zholes_init();
- }
- if (nid >= MAX_NUMNODES || !node_online(nid))
- printk("%s: nid = %d is invalid/offline. num_online_nodes = %d",
- __FUNCTION__, nid, num_online_nodes());
- return &zholes_size[nid * MAX_NR_ZONES];
-}
diff --git a/arch/i386/mm/discontig.c b/arch/i386/mm/discontig.c
index 941d1a5..51e3739 100644
--- a/arch/i386/mm/discontig.c
+++ b/arch/i386/mm/discontig.c
@@ -157,21 +157,6 @@
BUG();
}
-/* Find the owning node for a pfn. */
-int early_pfn_to_nid(unsigned long pfn)
-{
- int nid;
-
- for_each_node(nid) {
- if (node_end_pfn[nid] == 0)
- break;
- if (node_start_pfn[nid] <= pfn && node_end_pfn[nid] >= pfn)
- return nid;
- }
-
- return 0;
-}
-
/*
* Allocate memory for the pg_data_t for this node via a crude pre-bootmem
* method. For node zero take this from the bottom of memory, for
@@ -227,6 +212,8 @@
unsigned long pfn;
for_each_online_node(nid) {
+ unsigned old_end_pfn = node_end_pfn[nid];
+
/*
* The acpi/srat node info can show hot-add memroy zones
* where memory could be added but not currently present.
@@ -276,6 +263,7 @@
node_end_pfn[nid] -= size;
node_remap_start_pfn[nid] = node_end_pfn[nid];
+ shrink_active_range(nid, old_end_pfn, node_end_pfn[nid]);
}
printk("Reserving total of %ld pages for numa KVA remap\n",
reserve_pages);
@@ -369,45 +357,22 @@
void __init zone_sizes_init(void)
{
int nid;
+ unsigned long max_zone_pfns[MAX_NR_ZONES] = {
+ virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT,
+ max_low_pfn,
+ highend_pfn
+ };
-
- for_each_online_node(nid) {
- unsigned long zones_size[MAX_NR_ZONES] = {0, };
- unsigned long *zholes_size;
- unsigned int max_dma;
-
- unsigned long low = max_low_pfn;
- unsigned long start = node_start_pfn[nid];
- unsigned long high = node_end_pfn[nid];
-
- max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
-
- if (node_has_online_mem(nid)){
- if (start > low) {
-#ifdef CONFIG_HIGHMEM
- BUG_ON(start > high);
- zones_size[ZONE_HIGHMEM] = high - start;
-#endif
- } else {
- if (low < max_dma)
- zones_size[ZONE_DMA] = low;
- else {
- BUG_ON(max_dma > low);
- BUG_ON(low > high);
- zones_size[ZONE_DMA] = max_dma;
- zones_size[ZONE_NORMAL] = low - max_dma;
-#ifdef CONFIG_HIGHMEM
- zones_size[ZONE_HIGHMEM] = high - low;
-#endif
- }
- }
+ /* If SRAT has not registered memory, register it now */
+ if (find_max_pfn_with_active_regions() == 0) {
+ for_each_online_node(nid) {
+ if (node_has_online_mem(nid))
+ add_active_range(nid, node_start_pfn[nid],
+ node_end_pfn[nid]);
}
-
- zholes_size = get_zholes_size(nid);
-
- free_area_init_node(nid, NODE_DATA(nid), zones_size, start,
- zholes_size);
}
+
+ free_area_init_nodes(max_zone_pfns);
return;
}