Merge branch 'serial-from-alan'
* serial-from-alan: (79 commits)
moxa: prevent opening unavailable ports
imx: serial: use tty_encode_baud_rate to set true rate
imx: serial: add IrDA support to serial driver
imx: serial: use rational library function
lib: isolate rational fractions helper function
imx: serial: handle initialisation failure correctly
imx: serial: be sure to stop xmit upon shutdown
imx: serial: notify higher layers in case xmit IRQ was not called
imx: serial: fix one bit field type
imx: serial: fix whitespaces (no changes in functionality)
tty: use prepare/finish_wait
tty: remove sleep_on
sierra: driver interface blacklisting
sierra: driver urb handling improvements
tty: resolve some sierra breakage
timbuart: Fix the termios logic
serial: Added Timberdale UART driver
tty: Add URL for ttydev queue
devpts: unregister the file system on error
tty: Untangle termios and mm mutex dependencies
...
diff --git a/MAINTAINERS b/MAINTAINERS
index cf4abdd..84285b5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -71,7 +71,7 @@
M: Mail patches to
L: Mailing list that is relevant to this area
W: Web-page with status/info
-T: SCM tree type and location. Type is one of: git, hg, quilt.
+T: SCM tree type and location. Type is one of: git, hg, quilt, stgit.
S: Status, one of the following:
Supported: Someone is actually paid to look after this.
@@ -159,7 +159,8 @@
8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
L: linux-serial@vger.kernel.org
W: http://serial.sourceforge.net
-S: Orphan
+M: alan@lxorguk.ukuu.org.uk
+S: Odd Fixes
F: drivers/serial/8250*
F: include/linux/serial_8250.h
@@ -5629,6 +5630,7 @@
M: alan@lxorguk.ukuu.org.uk
L: linux-kernel@vger.kernel.org
S: Maintained
+T: stgit http://zeniv.linux.org.uk/~alan/ttydev/
TULIP NETWORK DRIVERS
P: Grant Grundler
diff --git a/arch/arm/plat-mxc/include/mach/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h
index 599217b..f9bd17d 100644
--- a/arch/arm/plat-mxc/include/mach/imx-uart.h
+++ b/arch/arm/plat-mxc/include/mach/imx-uart.h
@@ -20,11 +20,16 @@
#define ASMARM_ARCH_UART_H
#define IMXUART_HAVE_RTSCTS (1<<0)
+#define IMXUART_IRDA (1<<1)
struct imxuart_platform_data {
int (*init)(struct platform_device *pdev);
int (*exit)(struct platform_device *pdev);
unsigned int flags;
+ void (*irda_enable)(int enable);
+ unsigned int irda_inv_rx:1;
+ unsigned int irda_inv_tx:1;
+ unsigned short transceiver_delay;
};
#endif
diff --git a/arch/x86/include/asm/termios.h b/arch/x86/include/asm/termios.h
index f729563..c4ee805 100644
--- a/arch/x86/include/asm/termios.h
+++ b/arch/x86/include/asm/termios.h
@@ -67,6 +67,7 @@
SET_LOW_TERMIOS_BITS(termios, termio, c_oflag);
SET_LOW_TERMIOS_BITS(termios, termio, c_cflag);
SET_LOW_TERMIOS_BITS(termios, termio, c_lflag);
+ get_user(termios->c_line, &termio->c_line);
return copy_from_user(termios->c_cc, termio->c_cc, NCC);
}
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index af761dc..4895f0e 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -277,8 +277,8 @@
/* FIXME: why is this needed. Note don't use ldisc_ref here as the
open path is before the ldisc is referencable */
- if (tty->ldisc.ops->flush_buffer)
- tty->ldisc.ops->flush_buffer(tty);
+ if (tty->ldisc->ops->flush_buffer)
+ tty->ldisc->ops->flush_buffer(tty);
tty_driver_flush_buffer(tty);
return 0;
@@ -463,7 +463,6 @@
clear_bit(HCI_UART_PROTO_SET, &hu->flags);
return err;
}
- tty->low_latency = 1;
} else
return -EBUSY;
break;
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 735bbe2..02ecfd5 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -97,6 +97,19 @@
kind of kernel debugging operations.
When in doubt, say "N".
+config BFIN_JTAG_COMM
+ tristate "Blackfin JTAG Communication"
+ depends on BLACKFIN
+ help
+ Add support for emulating a TTY device over the Blackfin JTAG.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bfin_jtag_comm.
+
+config BFIN_JTAG_COMM_CONSOLE
+ bool "Console on Blackfin JTAG"
+ depends on BFIN_JTAG_COMM=y
+
config SERIAL_NONSTANDARD
bool "Non-standard serial port support"
depends on HAS_IOMEM
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 9caf5b5..189efcf 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -13,6 +13,7 @@
obj-$(CONFIG_UNIX98_PTYS) += pty.o
obj-y += misc.o
obj-$(CONFIG_VT) += vt_ioctl.o vc_screen.o selection.o keyboard.o
+obj-$(CONFIG_BFIN_JTAG_COMM) += bfin_jtag_comm.o
obj-$(CONFIG_CONSOLE_TRANSLATIONS) += consolemap.o consolemap_deftbl.o
obj-$(CONFIG_HW_CONSOLE) += vt.o defkeymap.o
obj-$(CONFIG_AUDIT) += tty_audit.o
diff --git a/drivers/char/bfin_jtag_comm.c b/drivers/char/bfin_jtag_comm.c
new file mode 100644
index 0000000..44c113d
--- /dev/null
+++ b/drivers/char/bfin_jtag_comm.c
@@ -0,0 +1,365 @@
+/*
+ * TTY over Blackfin JTAG Communication
+ *
+ * Copyright 2008-2009 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/circ_buf.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <asm/atomic.h>
+
+/* See the Debug/Emulation chapter in the HRM */
+#define EMUDOF 0x00000001 /* EMUDAT_OUT full & valid */
+#define EMUDIF 0x00000002 /* EMUDAT_IN full & valid */
+#define EMUDOOVF 0x00000004 /* EMUDAT_OUT overflow */
+#define EMUDIOVF 0x00000008 /* EMUDAT_IN overflow */
+
+#define DRV_NAME "bfin-jtag-comm"
+#define DEV_NAME "ttyBFJC"
+
+#define pr_init(fmt, args...) ({ static const __initdata char __fmt[] = fmt; printk(__fmt, ## args); })
+#define debug(fmt, args...) pr_debug(DRV_NAME ": " fmt, ## args)
+
+static inline uint32_t bfin_write_emudat(uint32_t emudat)
+{
+ __asm__ __volatile__("emudat = %0;" : : "d"(emudat));
+ return emudat;
+}
+
+static inline uint32_t bfin_read_emudat(void)
+{
+ uint32_t emudat;
+ __asm__ __volatile__("%0 = emudat;" : "=d"(emudat));
+ return emudat;
+}
+
+static inline uint32_t bfin_write_emudat_chars(char a, char b, char c, char d)
+{
+ return bfin_write_emudat((a << 0) | (b << 8) | (c << 16) | (d << 24));
+}
+
+#define CIRC_SIZE 2048 /* see comment in tty_io.c:do_tty_write() */
+#define CIRC_MASK (CIRC_SIZE - 1)
+#define circ_empty(circ) ((circ)->head == (circ)->tail)
+#define circ_free(circ) CIRC_SPACE((circ)->head, (circ)->tail, CIRC_SIZE)
+#define circ_cnt(circ) CIRC_CNT((circ)->head, (circ)->tail, CIRC_SIZE)
+#define circ_byte(circ, idx) ((circ)->buf[(idx) & CIRC_MASK])
+
+static struct tty_driver *bfin_jc_driver;
+static struct task_struct *bfin_jc_kthread;
+static struct tty_struct * volatile bfin_jc_tty;
+static unsigned long bfin_jc_count;
+static DEFINE_MUTEX(bfin_jc_tty_mutex);
+static volatile struct circ_buf bfin_jc_write_buf;
+
+static int
+bfin_jc_emudat_manager(void *arg)
+{
+ uint32_t inbound_len = 0, outbound_len = 0;
+
+ while (!kthread_should_stop()) {
+ /* no one left to give data to, so sleep */
+ if (bfin_jc_tty == NULL && circ_empty(&bfin_jc_write_buf)) {
+ debug("waiting for readers\n");
+ __set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule();
+ __set_current_state(TASK_RUNNING);
+ }
+
+ /* no data available, so just chill */
+ if (!(bfin_read_DBGSTAT() & EMUDIF) && circ_empty(&bfin_jc_write_buf)) {
+ debug("waiting for data (in_len = %i) (circ: %i %i)\n",
+ inbound_len, bfin_jc_write_buf.tail, bfin_jc_write_buf.head);
+ if (inbound_len)
+ schedule();
+ else
+ schedule_timeout_interruptible(HZ);
+ continue;
+ }
+
+ /* if incoming data is ready, eat it */
+ if (bfin_read_DBGSTAT() & EMUDIF) {
+ struct tty_struct *tty;
+ mutex_lock(&bfin_jc_tty_mutex);
+ tty = (struct tty_struct *)bfin_jc_tty;
+ if (tty != NULL) {
+ uint32_t emudat = bfin_read_emudat();
+ if (inbound_len == 0) {
+ debug("incoming length: 0x%08x\n", emudat);
+ inbound_len = emudat;
+ } else {
+ size_t num_chars = (4 <= inbound_len ? 4 : inbound_len);
+ debug(" incoming data: 0x%08x (pushing %zu)\n", emudat, num_chars);
+ inbound_len -= num_chars;
+ tty_insert_flip_string(tty, (unsigned char *)&emudat, num_chars);
+ tty_flip_buffer_push(tty);
+ }
+ }
+ mutex_unlock(&bfin_jc_tty_mutex);
+ }
+
+ /* if outgoing data is ready, post it */
+ if (!(bfin_read_DBGSTAT() & EMUDOF) && !circ_empty(&bfin_jc_write_buf)) {
+ if (outbound_len == 0) {
+ outbound_len = circ_cnt(&bfin_jc_write_buf);
+ bfin_write_emudat(outbound_len);
+ debug("outgoing length: 0x%08x\n", outbound_len);
+ } else {
+ struct tty_struct *tty;
+ int tail = bfin_jc_write_buf.tail;
+ size_t ate = (4 <= outbound_len ? 4 : outbound_len);
+ uint32_t emudat =
+ bfin_write_emudat_chars(
+ circ_byte(&bfin_jc_write_buf, tail + 0),
+ circ_byte(&bfin_jc_write_buf, tail + 1),
+ circ_byte(&bfin_jc_write_buf, tail + 2),
+ circ_byte(&bfin_jc_write_buf, tail + 3)
+ );
+ bfin_jc_write_buf.tail += ate;
+ outbound_len -= ate;
+ mutex_lock(&bfin_jc_tty_mutex);
+ tty = (struct tty_struct *)bfin_jc_tty;
+ if (tty)
+ tty_wakeup(tty);
+ mutex_unlock(&bfin_jc_tty_mutex);
+ debug(" outgoing data: 0x%08x (pushing %zu)\n", emudat, ate);
+ }
+ }
+ }
+
+ __set_current_state(TASK_RUNNING);
+ return 0;
+}
+
+static int
+bfin_jc_open(struct tty_struct *tty, struct file *filp)
+{
+ mutex_lock(&bfin_jc_tty_mutex);
+ debug("open %lu\n", bfin_jc_count);
+ ++bfin_jc_count;
+ bfin_jc_tty = tty;
+ wake_up_process(bfin_jc_kthread);
+ mutex_unlock(&bfin_jc_tty_mutex);
+ return 0;
+}
+
+static void
+bfin_jc_close(struct tty_struct *tty, struct file *filp)
+{
+ mutex_lock(&bfin_jc_tty_mutex);
+ debug("close %lu\n", bfin_jc_count);
+ if (--bfin_jc_count == 0)
+ bfin_jc_tty = NULL;
+ wake_up_process(bfin_jc_kthread);
+ mutex_unlock(&bfin_jc_tty_mutex);
+}
+
+/* XXX: we dont handle the put_char() case where we must handle count = 1 */
+static int
+bfin_jc_circ_write(const unsigned char *buf, int count)
+{
+ int i;
+ count = min(count, circ_free(&bfin_jc_write_buf));
+ debug("going to write chunk of %i bytes\n", count);
+ for (i = 0; i < count; ++i)
+ circ_byte(&bfin_jc_write_buf, bfin_jc_write_buf.head + i) = buf[i];
+ bfin_jc_write_buf.head += i;
+ return i;
+}
+
+#ifndef CONFIG_BFIN_JTAG_COMM_CONSOLE
+# define acquire_console_sem()
+# define release_console_sem()
+#endif
+static int
+bfin_jc_write(struct tty_struct *tty, const unsigned char *buf, int count)
+{
+ int i;
+ acquire_console_sem();
+ i = bfin_jc_circ_write(buf, count);
+ release_console_sem();
+ wake_up_process(bfin_jc_kthread);
+ return i;
+}
+
+static void
+bfin_jc_flush_chars(struct tty_struct *tty)
+{
+ wake_up_process(bfin_jc_kthread);
+}
+
+static int
+bfin_jc_write_room(struct tty_struct *tty)
+{
+ return circ_free(&bfin_jc_write_buf);
+}
+
+static int
+bfin_jc_chars_in_buffer(struct tty_struct *tty)
+{
+ return circ_cnt(&bfin_jc_write_buf);
+}
+
+static void
+bfin_jc_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+ unsigned long expire = jiffies + timeout;
+ while (!circ_empty(&bfin_jc_write_buf)) {
+ if (signal_pending(current))
+ break;
+ if (time_after(jiffies, expire))
+ break;
+ }
+}
+
+static struct tty_operations bfin_jc_ops = {
+ .open = bfin_jc_open,
+ .close = bfin_jc_close,
+ .write = bfin_jc_write,
+ /*.put_char = bfin_jc_put_char,*/
+ .flush_chars = bfin_jc_flush_chars,
+ .write_room = bfin_jc_write_room,
+ .chars_in_buffer = bfin_jc_chars_in_buffer,
+ .wait_until_sent = bfin_jc_wait_until_sent,
+};
+
+static int __init bfin_jc_init(void)
+{
+ int ret;
+
+ bfin_jc_kthread = kthread_create(bfin_jc_emudat_manager, NULL, DRV_NAME);
+ if (IS_ERR(bfin_jc_kthread))
+ return PTR_ERR(bfin_jc_kthread);
+
+ ret = -ENOMEM;
+
+ bfin_jc_write_buf.head = bfin_jc_write_buf.tail = 0;
+ bfin_jc_write_buf.buf = kmalloc(CIRC_SIZE, GFP_KERNEL);
+ if (!bfin_jc_write_buf.buf)
+ goto err;
+
+ bfin_jc_driver = alloc_tty_driver(1);
+ if (!bfin_jc_driver)
+ goto err;
+
+ bfin_jc_driver->owner = THIS_MODULE;
+ bfin_jc_driver->driver_name = DRV_NAME;
+ bfin_jc_driver->name = DEV_NAME;
+ bfin_jc_driver->type = TTY_DRIVER_TYPE_SERIAL;
+ bfin_jc_driver->subtype = SERIAL_TYPE_NORMAL;
+ bfin_jc_driver->init_termios = tty_std_termios;
+ tty_set_operations(bfin_jc_driver, &bfin_jc_ops);
+
+ ret = tty_register_driver(bfin_jc_driver);
+ if (ret)
+ goto err;
+
+ pr_init(KERN_INFO DRV_NAME ": initialized\n");
+
+ return 0;
+
+ err:
+ put_tty_driver(bfin_jc_driver);
+ kfree(bfin_jc_write_buf.buf);
+ kthread_stop(bfin_jc_kthread);
+ return ret;
+}
+module_init(bfin_jc_init);
+
+static void __exit bfin_jc_exit(void)
+{
+ kthread_stop(bfin_jc_kthread);
+ kfree(bfin_jc_write_buf.buf);
+ tty_unregister_driver(bfin_jc_driver);
+ put_tty_driver(bfin_jc_driver);
+}
+module_exit(bfin_jc_exit);
+
+#if defined(CONFIG_BFIN_JTAG_COMM_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+static void
+bfin_jc_straight_buffer_write(const char *buf, unsigned count)
+{
+ unsigned ate = 0;
+ while (bfin_read_DBGSTAT() & EMUDOF)
+ continue;
+ bfin_write_emudat(count);
+ while (ate < count) {
+ while (bfin_read_DBGSTAT() & EMUDOF)
+ continue;
+ bfin_write_emudat_chars(buf[ate], buf[ate+1], buf[ate+2], buf[ate+3]);
+ ate += 4;
+ }
+}
+#endif
+
+#ifdef CONFIG_BFIN_JTAG_COMM_CONSOLE
+static void
+bfin_jc_console_write(struct console *co, const char *buf, unsigned count)
+{
+ if (bfin_jc_kthread == NULL)
+ bfin_jc_straight_buffer_write(buf, count);
+ else
+ bfin_jc_circ_write(buf, count);
+}
+
+static struct tty_driver *
+bfin_jc_console_device(struct console *co, int *index)
+{
+ *index = co->index;
+ return bfin_jc_driver;
+}
+
+static struct console bfin_jc_console = {
+ .name = DEV_NAME,
+ .write = bfin_jc_console_write,
+ .device = bfin_jc_console_device,
+ .flags = CON_ANYTIME | CON_PRINTBUFFER,
+ .index = -1,
+};
+
+static int __init bfin_jc_console_init(void)
+{
+ register_console(&bfin_jc_console);
+ return 0;
+}
+console_initcall(bfin_jc_console_init);
+#endif
+
+#ifdef CONFIG_EARLY_PRINTK
+static void __init
+bfin_jc_early_write(struct console *co, const char *buf, unsigned int count)
+{
+ bfin_jc_straight_buffer_write(buf, count);
+}
+
+static struct __initdata console bfin_jc_early_console = {
+ .name = "early_BFJC",
+ .write = bfin_jc_early_write,
+ .flags = CON_ANYTIME | CON_PRINTBUFFER,
+ .index = -1,
+};
+
+struct console * __init
+bfin_jc_early_init(unsigned int port, unsigned int cflag)
+{
+ return &bfin_jc_early_console;
+}
+#endif
+
+MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>");
+MODULE_DESCRIPTION("TTY over Blackfin JTAG Communication");
+MODULE_LICENSE("GPL");
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index 1fdb9f6..f3366d3 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -604,7 +604,6 @@
#define NR_PORTS 256
-#define ZE_V1_NPORTS 64
#define ZO_V1 0
#define ZO_V2 1
#define ZE_V1 2
@@ -663,18 +662,6 @@
static void cy_throttle(struct tty_struct *tty);
static void cy_send_xchar(struct tty_struct *tty, char ch);
-#define IS_CYC_Z(card) ((card).num_chips == (unsigned int)-1)
-
-#define Z_FPGA_CHECK(card) \
- ((readl(&((struct RUNTIME_9060 __iomem *) \
- ((card).ctl_addr))->init_ctrl) & (1<<17)) != 0)
-
-#define ISZLOADED(card) (((ZO_V1 == readl(&((struct RUNTIME_9060 __iomem *) \
- ((card).ctl_addr))->mail_box_0)) || \
- Z_FPGA_CHECK(card)) && \
- (ZFIRM_ID == readl(&((struct FIRM_ID __iomem *) \
- ((card).base_addr+ID_ADDRESS))->signature)))
-
#ifndef SERIAL_XMIT_SIZE
#define SERIAL_XMIT_SIZE (min(PAGE_SIZE, 4096))
#endif
@@ -687,8 +674,6 @@
#define DRIVER_VERSION 0x02010203
#define RAM_SIZE 0x80000
-#define Z_FPGA_LOADED(X) ((readl(&(X)->init_ctrl) & (1<<17)) != 0)
-
enum zblock_type {
ZBLOCK_PRG = 0,
ZBLOCK_FPGA = 1
@@ -883,6 +868,29 @@
static struct timer_list cyz_rx_full_timer[NR_PORTS];
#endif /* CONFIG_CYZ_INTR */
+static inline bool cy_is_Z(struct cyclades_card *card)
+{
+ return card->num_chips == (unsigned int)-1;
+}
+
+static inline bool __cyz_fpga_loaded(struct RUNTIME_9060 __iomem *ctl_addr)
+{
+ return readl(&ctl_addr->init_ctrl) & (1 << 17);
+}
+
+static inline bool cyz_fpga_loaded(struct cyclades_card *card)
+{
+ return __cyz_fpga_loaded(card->ctl_addr.p9060);
+}
+
+static inline bool cyz_is_loaded(struct cyclades_card *card)
+{
+ struct FIRM_ID __iomem *fw_id = card->base_addr + ID_ADDRESS;
+
+ return (card->hw_ver == ZO_V1 || cyz_fpga_loaded(card)) &&
+ readl(&fw_id->signature) == ZFIRM_ID;
+}
+
static inline int serial_paranoia_check(struct cyclades_port *info,
char *name, const char *routine)
{
@@ -1395,19 +1403,15 @@
unsigned long loc_doorbell;
firm_id = cinfo->base_addr + ID_ADDRESS;
- if (!ISZLOADED(*cinfo))
- return -1;
zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
board_ctrl = &zfw_ctrl->board_ctrl;
- loc_doorbell = readl(&((struct RUNTIME_9060 __iomem *)
- (cinfo->ctl_addr))->loc_doorbell);
+ loc_doorbell = readl(&cinfo->ctl_addr.p9060->loc_doorbell);
if (loc_doorbell) {
*cmd = (char)(0xff & loc_doorbell);
*channel = readl(&board_ctrl->fwcmd_channel);
*param = (__u32) readl(&board_ctrl->fwcmd_param);
- cy_writel(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->
- loc_doorbell, 0xffffffff);
+ cy_writel(&cinfo->ctl_addr.p9060->loc_doorbell, 0xffffffff);
return 1;
}
return 0;
@@ -1424,15 +1428,14 @@
unsigned int index;
firm_id = cinfo->base_addr + ID_ADDRESS;
- if (!ISZLOADED(*cinfo))
+ if (!cyz_is_loaded(cinfo))
return -1;
zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
board_ctrl = &zfw_ctrl->board_ctrl;
index = 0;
- pci_doorbell =
- &((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->pci_doorbell;
+ pci_doorbell = &cinfo->ctl_addr.p9060->pci_doorbell;
while ((readl(pci_doorbell) & 0xff) != 0) {
if (index++ == 1000)
return (int)(readl(pci_doorbell) & 0xff);
@@ -1624,10 +1627,8 @@
static struct BOARD_CTRL __iomem *board_ctrl;
static struct CH_CTRL __iomem *ch_ctrl;
static struct BUF_CTRL __iomem *buf_ctrl;
- __u32 channel;
+ __u32 channel, param, fw_ver;
__u8 cmd;
- __u32 param;
- __u32 hw_ver, fw_ver;
int special_count;
int delta_count;
@@ -1635,8 +1636,6 @@
zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
board_ctrl = &zfw_ctrl->board_ctrl;
fw_ver = readl(&board_ctrl->fw_version);
- hw_ver = readl(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->
- mail_box_0);
while (cyz_fetch_msg(cinfo, &channel, &cmd, ¶m) == 1) {
special_count = 0;
@@ -1737,15 +1736,7 @@
{
struct cyclades_card *cinfo = dev_id;
- if (unlikely(cinfo == NULL)) {
-#ifdef CY_DEBUG_INTERRUPTS
- printk(KERN_DEBUG "cyz_interrupt: spurious interrupt %d\n",
- irq);
-#endif
- return IRQ_NONE; /* spurious interrupt */
- }
-
- if (unlikely(!ISZLOADED(*cinfo))) {
+ if (unlikely(!cyz_is_loaded(cinfo))) {
#ifdef CY_DEBUG_INTERRUPTS
printk(KERN_DEBUG "cyz_interrupt: board not yet loaded "
"(IRQ%d).\n", irq);
@@ -1785,7 +1776,6 @@
struct tty_struct *tty;
struct FIRM_ID __iomem *firm_id;
struct ZFW_CTRL __iomem *zfw_ctrl;
- struct BOARD_CTRL __iomem *board_ctrl;
struct BUF_CTRL __iomem *buf_ctrl;
unsigned long expires = jiffies + HZ;
unsigned int port, card;
@@ -1793,19 +1783,17 @@
for (card = 0; card < NR_CARDS; card++) {
cinfo = &cy_card[card];
- if (!IS_CYC_Z(*cinfo))
+ if (!cy_is_Z(cinfo))
continue;
- if (!ISZLOADED(*cinfo))
+ if (!cyz_is_loaded(cinfo))
continue;
firm_id = cinfo->base_addr + ID_ADDRESS;
zfw_ctrl = cinfo->base_addr +
(readl(&firm_id->zfwctrl_addr) & 0xfffff);
- board_ctrl = &(zfw_ctrl->board_ctrl);
/* Skip first polling cycle to avoid racing conditions with the FW */
if (!cinfo->intr_enabled) {
- cinfo->nports = (int)readl(&board_ctrl->n_channel);
cinfo->intr_enabled = 1;
continue;
}
@@ -1874,7 +1862,7 @@
set_line_char(info);
- if (!IS_CYC_Z(*card)) {
+ if (!cy_is_Z(card)) {
chip = channel >> 2;
channel &= 0x03;
index = card->bus_index;
@@ -1931,7 +1919,7 @@
base_addr = card->base_addr;
firm_id = base_addr + ID_ADDRESS;
- if (!ISZLOADED(*card))
+ if (!cyz_is_loaded(card))
return -ENODEV;
zfw_ctrl = card->base_addr +
@@ -2026,7 +2014,7 @@
card = info->card;
channel = info->line - card->first_line;
- if (!IS_CYC_Z(*card)) {
+ if (!cy_is_Z(card)) {
chip = channel >> 2;
channel &= 0x03;
index = card->bus_index;
@@ -2070,7 +2058,7 @@
card = info->card;
channel = info->line - card->first_line;
- if (!IS_CYC_Z(*card)) {
+ if (!cy_is_Z(card)) {
chip = channel >> 2;
channel &= 0x03;
index = card->bus_index;
@@ -2126,7 +2114,7 @@
#endif
firm_id = base_addr + ID_ADDRESS;
- if (!ISZLOADED(*card))
+ if (!cyz_is_loaded(card))
return;
zfw_ctrl = card->base_addr +
@@ -2233,7 +2221,7 @@
#endif
info->port.blocked_open++;
- if (!IS_CYC_Z(*cinfo)) {
+ if (!cy_is_Z(cinfo)) {
chip = channel >> 2;
channel &= 0x03;
index = cinfo->bus_index;
@@ -2296,7 +2284,7 @@
base_addr = cinfo->base_addr;
firm_id = base_addr + ID_ADDRESS;
- if (!ISZLOADED(*cinfo)) {
+ if (!cyz_is_loaded(cinfo)) {
__set_current_state(TASK_RUNNING);
remove_wait_queue(&info->port.open_wait, &wait);
return -EINVAL;
@@ -2397,16 +2385,14 @@
treat it as absent from the system. This
will make the user pay attention.
*/
- if (IS_CYC_Z(*info->card)) {
+ if (cy_is_Z(info->card)) {
struct cyclades_card *cinfo = info->card;
struct FIRM_ID __iomem *firm_id = cinfo->base_addr + ID_ADDRESS;
- if (!ISZLOADED(*cinfo)) {
- if (((ZE_V1 == readl(&((struct RUNTIME_9060 __iomem *)
- (cinfo->ctl_addr))->mail_box_0)) &&
- Z_FPGA_CHECK(*cinfo)) &&
- (ZFIRM_HLT == readl(
- &firm_id->signature))) {
+ if (!cyz_is_loaded(cinfo)) {
+ if (cinfo->hw_ver == ZE_V1 && cyz_fpga_loaded(cinfo) &&
+ readl(&firm_id->signature) ==
+ ZFIRM_HLT) {
printk(KERN_ERR "cyc:Cyclades-Z Error: you "
"need an external power supply for "
"this number of ports.\nFirmware "
@@ -2423,18 +2409,13 @@
interrupts should be enabled as soon as the first open
happens to one of its ports. */
if (!cinfo->intr_enabled) {
- struct ZFW_CTRL __iomem *zfw_ctrl;
- struct BOARD_CTRL __iomem *board_ctrl;
-
- zfw_ctrl = cinfo->base_addr +
- (readl(&firm_id->zfwctrl_addr) &
- 0xfffff);
-
- board_ctrl = &zfw_ctrl->board_ctrl;
+ u16 intr;
/* Enable interrupts on the PLX chip */
- cy_writew(cinfo->ctl_addr + 0x68,
- readw(cinfo->ctl_addr + 0x68) | 0x0900);
+ intr = readw(&cinfo->ctl_addr.p9060->
+ intr_ctrl_stat) | 0x0900;
+ cy_writew(&cinfo->ctl_addr.p9060->
+ intr_ctrl_stat, intr);
/* Enable interrupts on the FW */
retval = cyz_issue_cmd(cinfo, 0,
C_CM_IRQ_ENBL, 0L);
@@ -2442,8 +2423,6 @@
printk(KERN_ERR "cyc:IRQ enable retval "
"was %x\n", retval);
}
- cinfo->nports =
- (int)readl(&board_ctrl->n_channel);
cinfo->intr_enabled = 1;
}
}
@@ -2556,7 +2535,7 @@
#endif
card = info->card;
channel = (info->line) - (card->first_line);
- if (!IS_CYC_Z(*card)) {
+ if (!cy_is_Z(card)) {
chip = channel >> 2;
channel &= 0x03;
index = card->bus_index;
@@ -2601,7 +2580,7 @@
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
spin_unlock_irqrestore(&card->card_lock, flags);
- if (IS_CYC_Z(*card)) { /* If it is a Z card, flush the on-board
+ if (cy_is_Z(card)) { /* If it is a Z card, flush the on-board
buffers as well */
spin_lock_irqsave(&card->card_lock, flags);
retval = cyz_issue_cmd(card, channel, C_CM_FLUSH_TX, 0L);
@@ -2682,7 +2661,7 @@
spin_lock_irqsave(&card->card_lock, flags);
- if (!IS_CYC_Z(*card)) {
+ if (!cy_is_Z(card)) {
int channel = info->line - card->first_line;
int index = card->bus_index;
void __iomem *base_addr = card->base_addr +
@@ -2902,7 +2881,7 @@
channel = (info->line) - (card->first_line);
#ifdef Z_EXT_CHARS_IN_BUFFER
- if (!IS_CYC_Z(cy_card[card])) {
+ if (!cy_is_Z(card)) {
#endif /* Z_EXT_CHARS_IN_BUFFER */
#ifdef CY_DEBUG_IO
printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n",
@@ -2984,7 +2963,6 @@
void __iomem *base_addr;
int chip, channel, index;
unsigned cflag, iflag;
- unsigned short chip_number;
int baud, baud_rate = 0;
int i;
@@ -3013,9 +2991,8 @@
card = info->card;
channel = info->line - card->first_line;
- chip_number = channel / 4;
- if (!IS_CYC_Z(*card)) {
+ if (!cy_is_Z(card)) {
index = card->bus_index;
@@ -3233,21 +3210,17 @@
} else {
struct FIRM_ID __iomem *firm_id;
struct ZFW_CTRL __iomem *zfw_ctrl;
- struct BOARD_CTRL __iomem *board_ctrl;
struct CH_CTRL __iomem *ch_ctrl;
- struct BUF_CTRL __iomem *buf_ctrl;
__u32 sw_flow;
int retval;
firm_id = card->base_addr + ID_ADDRESS;
- if (!ISZLOADED(*card))
+ if (!cyz_is_loaded(card))
return;
zfw_ctrl = card->base_addr +
(readl(&firm_id->zfwctrl_addr) & 0xfffff);
- board_ctrl = &zfw_ctrl->board_ctrl;
ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]);
- buf_ctrl = &zfw_ctrl->buf_ctrl[channel];
/* baud rate */
baud = tty_get_baud_rate(info->port.tty);
@@ -3457,7 +3430,7 @@
card = info->card;
channel = (info->line) - (card->first_line);
- if (!IS_CYC_Z(*card)) {
+ if (!cy_is_Z(card)) {
chip = channel >> 2;
channel &= 0x03;
index = card->bus_index;
@@ -3497,7 +3470,7 @@
card = info->card;
channel = info->line - card->first_line;
- if (!IS_CYC_Z(*card)) {
+ if (!cy_is_Z(card)) {
chip = channel >> 2;
channel &= 0x03;
index = card->bus_index;
@@ -3523,7 +3496,7 @@
} else {
base_addr = card->base_addr;
firm_id = card->base_addr + ID_ADDRESS;
- if (ISZLOADED(*card)) {
+ if (cyz_is_loaded(card)) {
zfw_ctrl = card->base_addr +
(readl(&firm_id->zfwctrl_addr) & 0xfffff);
board_ctrl = &zfw_ctrl->board_ctrl;
@@ -3566,7 +3539,7 @@
card = info->card;
channel = (info->line) - (card->first_line);
- if (!IS_CYC_Z(*card)) {
+ if (!cy_is_Z(card)) {
chip = channel >> 2;
channel &= 0x03;
index = card->bus_index;
@@ -3641,7 +3614,7 @@
base_addr = card->base_addr;
firm_id = card->base_addr + ID_ADDRESS;
- if (ISZLOADED(*card)) {
+ if (cyz_is_loaded(card)) {
zfw_ctrl = card->base_addr +
(readl(&firm_id->zfwctrl_addr) & 0xfffff);
board_ctrl = &zfw_ctrl->board_ctrl;
@@ -3713,7 +3686,7 @@
card = info->card;
spin_lock_irqsave(&card->card_lock, flags);
- if (!IS_CYC_Z(*card)) {
+ if (!cy_is_Z(card)) {
/* Let the transmit ISR take care of this (since it
requires stuffing characters into the output stream).
*/
@@ -3782,7 +3755,7 @@
card = info->card;
channel = info->line - card->first_line;
- if (!IS_CYC_Z(*card)) {
+ if (!cy_is_Z(card)) {
chip = channel >> 2;
channel &= 0x03;
index = card->bus_index;
@@ -3810,7 +3783,7 @@
card = info->card;
channel = info->line - card->first_line;
- if (!IS_CYC_Z(*card)) {
+ if (!cy_is_Z(card)) {
chip = channel >> 2;
channel &= 0x03;
index = card->bus_index;
@@ -3844,7 +3817,7 @@
card = info->card;
channel = info->line - card->first_line;
- if (!IS_CYC_Z(*card)) {
+ if (!cy_is_Z(card)) {
chip = channel >> 2;
channel &= 0x03;
index = card->bus_index;
@@ -3867,7 +3840,7 @@
card = info->card;
channel = info->line - card->first_line;
- if (!IS_CYC_Z(*card)) {
+ if (!cy_is_Z(card)) {
chip = channel >> 2;
channel &= 0x03;
index = card->bus_index;
@@ -4121,7 +4094,7 @@
card = info->card;
channel = info->line - card->first_line;
- if (IS_CYC_Z(*card)) {
+ if (cy_is_Z(card)) {
if (ch == STOP_CHAR(tty))
cyz_issue_cmd(card, channel, C_CM_SENDXOFF, 0L);
else if (ch == START_CHAR(tty))
@@ -4154,7 +4127,7 @@
card = info->card;
if (I_IXOFF(tty)) {
- if (!IS_CYC_Z(*card))
+ if (!cy_is_Z(card))
cy_send_xchar(tty, STOP_CHAR(tty));
else
info->throttle = 1;
@@ -4162,7 +4135,7 @@
if (tty->termios->c_cflag & CRTSCTS) {
channel = info->line - card->first_line;
- if (!IS_CYC_Z(*card)) {
+ if (!cy_is_Z(card)) {
chip = channel >> 2;
channel &= 0x03;
index = card->bus_index;
@@ -4219,7 +4192,7 @@
if (tty->termios->c_cflag & CRTSCTS) {
card = info->card;
channel = info->line - card->first_line;
- if (!IS_CYC_Z(*card)) {
+ if (!cy_is_Z(card)) {
chip = channel >> 2;
channel &= 0x03;
index = card->bus_index;
@@ -4263,7 +4236,7 @@
cinfo = info->card;
channel = info->line - cinfo->first_line;
- if (!IS_CYC_Z(*cinfo)) {
+ if (!cy_is_Z(cinfo)) {
index = cinfo->bus_index;
chip = channel >> 2;
channel &= 0x03;
@@ -4296,7 +4269,7 @@
cinfo = info->card;
channel = info->line - cinfo->first_line;
index = cinfo->bus_index;
- if (!IS_CYC_Z(*cinfo)) {
+ if (!cy_is_Z(cinfo)) {
chip = channel >> 2;
channel &= 0x03;
base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index);
@@ -4347,33 +4320,20 @@
static int __devinit cy_init_card(struct cyclades_card *cinfo)
{
struct cyclades_port *info;
- u32 uninitialized_var(mailbox);
- unsigned int nports, port;
+ unsigned int port;
unsigned short chip_number;
- int uninitialized_var(index);
spin_lock_init(&cinfo->card_lock);
+ cinfo->intr_enabled = 0;
- if (IS_CYC_Z(*cinfo)) { /* Cyclades-Z */
- mailbox = readl(&((struct RUNTIME_9060 __iomem *)
- cinfo->ctl_addr)->mail_box_0);
- nports = (mailbox == ZE_V1) ? ZE_V1_NPORTS : 8;
- cinfo->intr_enabled = 0;
- cinfo->nports = 0; /* Will be correctly set later, after
- Z FW is loaded */
- } else {
- index = cinfo->bus_index;
- nports = cinfo->nports = CyPORTS_PER_CHIP * cinfo->num_chips;
- }
-
- cinfo->ports = kzalloc(sizeof(*cinfo->ports) * nports, GFP_KERNEL);
+ cinfo->ports = kcalloc(cinfo->nports, sizeof(*cinfo->ports),
+ GFP_KERNEL);
if (cinfo->ports == NULL) {
printk(KERN_ERR "Cyclades: cannot allocate ports\n");
- cinfo->nports = 0;
return -ENOMEM;
}
- for (port = cinfo->first_line; port < cinfo->first_line + nports;
+ for (port = cinfo->first_line; port < cinfo->first_line + cinfo->nports;
port++) {
info = &cinfo->ports[port - cinfo->first_line];
tty_port_init(&info->port);
@@ -4387,9 +4347,9 @@
init_completion(&info->shutdown_wait);
init_waitqueue_head(&info->delta_msr_wait);
- if (IS_CYC_Z(*cinfo)) {
+ if (cy_is_Z(cinfo)) {
info->type = PORT_STARTECH;
- if (mailbox == ZO_V1)
+ if (cinfo->hw_ver == ZO_V1)
info->xmit_fifo_size = CYZ_FIFO_SIZE;
else
info->xmit_fifo_size = 4 * CYZ_FIFO_SIZE;
@@ -4398,6 +4358,7 @@
cyz_rx_restart, (unsigned long)info);
#endif
} else {
+ int index = cinfo->bus_index;
info->type = PORT_CIRRUS;
info->xmit_fifo_size = CyMAX_CHAR_FIFO;
info->cor1 = CyPARITY_NONE | Cy_1_STOP | Cy_8_BITS;
@@ -4430,7 +4391,7 @@
}
#ifndef CONFIG_CYZ_INTR
- if (IS_CYC_Z(*cinfo) && !timer_pending(&cyz_timerlist)) {
+ if (cy_is_Z(cinfo) && !timer_pending(&cyz_timerlist)) {
mod_timer(&cyz_timerlist, jiffies + 1);
#ifdef CY_PCI_DEBUG
printk(KERN_DEBUG "Cyclades-Z polling initialized\n");
@@ -4621,11 +4582,12 @@
/* set cy_card */
cy_card[j].base_addr = cy_isa_address;
- cy_card[j].ctl_addr = NULL;
+ cy_card[j].ctl_addr.p9050 = NULL;
cy_card[j].irq = (int)cy_isa_irq;
cy_card[j].bus_index = 0;
cy_card[j].first_line = cy_next_channel;
- cy_card[j].num_chips = cy_isa_nchan / 4;
+ cy_card[j].num_chips = cy_isa_nchan / CyPORTS_PER_CHIP;
+ cy_card[j].nports = cy_isa_nchan;
if (cy_init_card(&cy_card[j])) {
cy_card[j].base_addr = NULL;
free_irq(cy_isa_irq, &cy_card[j]);
@@ -4781,7 +4743,7 @@
struct CUSTOM_REG __iomem *cust = base_addr;
struct ZFW_CTRL __iomem *pt_zfwctrl;
void __iomem *tmp;
- u32 mailbox, status;
+ u32 mailbox, status, nchan;
unsigned int i;
int retval;
@@ -4793,7 +4755,7 @@
/* Check whether the firmware is already loaded and running. If
positive, skip this board */
- if (Z_FPGA_LOADED(ctl_addr) && readl(&fid->signature) == ZFIRM_ID) {
+ if (__cyz_fpga_loaded(ctl_addr) && readl(&fid->signature) == ZFIRM_ID) {
u32 cntval = readl(base_addr + 0x190);
udelay(100);
@@ -4812,7 +4774,7 @@
mailbox = readl(&ctl_addr->mail_box_0);
- if (mailbox == 0 || Z_FPGA_LOADED(ctl_addr)) {
+ if (mailbox == 0 || __cyz_fpga_loaded(ctl_addr)) {
/* stops CPU and set window to beginning of RAM */
cy_writel(&ctl_addr->loc_addr_base, WIN_CREG);
cy_writel(&cust->cpu_stop, 0);
@@ -4828,7 +4790,7 @@
base_addr);
if (retval)
goto err_rel;
- if (!Z_FPGA_LOADED(ctl_addr)) {
+ if (!__cyz_fpga_loaded(ctl_addr)) {
dev_err(&pdev->dev, "fw upload successful, but fw is "
"not loaded\n");
goto err_rel;
@@ -4887,7 +4849,7 @@
"system before loading the new FW to the "
"Cyclades-Z.\n");
- if (Z_FPGA_LOADED(ctl_addr))
+ if (__cyz_fpga_loaded(ctl_addr))
plx_init(pdev, irq, ctl_addr);
retval = -EIO;
@@ -4902,16 +4864,16 @@
base_addr + ID_ADDRESS, readl(&fid->zfwctrl_addr),
base_addr + readl(&fid->zfwctrl_addr));
+ nchan = readl(&pt_zfwctrl->board_ctrl.n_channel);
dev_info(&pdev->dev, "Cyclades-Z FW loaded: version = %x, ports = %u\n",
- readl(&pt_zfwctrl->board_ctrl.fw_version),
- readl(&pt_zfwctrl->board_ctrl.n_channel));
+ readl(&pt_zfwctrl->board_ctrl.fw_version), nchan);
- if (readl(&pt_zfwctrl->board_ctrl.n_channel) == 0) {
+ if (nchan == 0) {
dev_warn(&pdev->dev, "no Cyclades-Z ports were found. Please "
"check the connection between the Z host card and the "
"serial expanders.\n");
- if (Z_FPGA_LOADED(ctl_addr))
+ if (__cyz_fpga_loaded(ctl_addr))
plx_init(pdev, irq, ctl_addr);
dev_info(&pdev->dev, "Null number of ports detected. Board "
@@ -4932,9 +4894,7 @@
cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) |
0x00030800UL);
- plx_init(pdev, irq, ctl_addr);
-
- return 0;
+ return nchan;
err_rel:
release_firmware(fw);
err:
@@ -4946,7 +4906,7 @@
{
void __iomem *addr0 = NULL, *addr2 = NULL;
char *card_name = NULL;
- u32 mailbox;
+ u32 uninitialized_var(mailbox);
unsigned int device_id, nchan = 0, card_no, i;
unsigned char plx_ver;
int retval, irq;
@@ -5023,11 +4983,12 @@
}
/* Disable interrupts on the PLX before resetting it */
- cy_writew(addr0 + 0x68, readw(addr0 + 0x68) & ~0x0900);
+ cy_writew(&ctl_addr->intr_ctrl_stat,
+ readw(&ctl_addr->intr_ctrl_stat) & ~0x0900);
plx_init(pdev, irq, addr0);
- mailbox = (u32)readl(&ctl_addr->mail_box_0);
+ mailbox = readl(&ctl_addr->mail_box_0);
addr2 = ioremap_nocache(pci_resource_start(pdev, 2),
mailbox == ZE_V1 ? CyPCI_Ze_win : CyPCI_Zwin);
@@ -5038,12 +4999,8 @@
if (mailbox == ZE_V1) {
card_name = "Cyclades-Ze";
-
- readl(&ctl_addr->mail_box_0);
- nchan = ZE_V1_NPORTS;
} else {
card_name = "Cyclades-8Zo";
-
#ifdef CY_PCI_DEBUG
if (mailbox == ZO_V1) {
cy_writel(&ctl_addr->loc_addr_base, WIN_CREG);
@@ -5065,15 +5022,12 @@
*/
if ((mailbox == ZO_V1) || (mailbox == ZO_V2))
cy_writel(addr2 + ID_ADDRESS, 0L);
-
- retval = cyz_load_fw(pdev, addr2, addr0, irq);
- if (retval)
- goto err_unmap;
- /* This must be a Cyclades-8Zo/PCI. The extendable
- version will have a different device_id and will
- be allocated its maximum number of ports. */
- nchan = 8;
}
+
+ retval = cyz_load_fw(pdev, addr2, addr0, irq);
+ if (retval <= 0)
+ goto err_unmap;
+ nchan = retval;
}
if ((cy_next_channel + nchan) > NR_PORTS) {
@@ -5103,8 +5057,10 @@
dev_err(&pdev->dev, "could not allocate IRQ\n");
goto err_unmap;
}
- cy_card[card_no].num_chips = nchan / 4;
+ cy_card[card_no].num_chips = nchan / CyPORTS_PER_CHIP;
} else {
+ cy_card[card_no].hw_ver = mailbox;
+ cy_card[card_no].num_chips = (unsigned int)-1;
#ifdef CONFIG_CYZ_INTR
/* allocate IRQ only if board has an IRQ */
if (irq != 0 && irq != 255) {
@@ -5117,15 +5073,15 @@
}
}
#endif /* CONFIG_CYZ_INTR */
- cy_card[card_no].num_chips = (unsigned int)-1;
}
/* set cy_card */
cy_card[card_no].base_addr = addr2;
- cy_card[card_no].ctl_addr = addr0;
+ cy_card[card_no].ctl_addr.p9050 = addr0;
cy_card[card_no].irq = irq;
cy_card[card_no].bus_index = 1;
cy_card[card_no].first_line = cy_next_channel;
+ cy_card[card_no].nports = nchan;
retval = cy_init_card(&cy_card[card_no]);
if (retval)
goto err_null;
@@ -5138,17 +5094,20 @@
plx_ver = readb(addr2 + CyPLX_VER) & 0x0f;
switch (plx_ver) {
case PLX_9050:
-
cy_writeb(addr0 + 0x4c, 0x43);
break;
case PLX_9060:
case PLX_9080:
default: /* Old boards, use PLX_9060 */
- plx_init(pdev, irq, addr0);
- cy_writew(addr0 + 0x68, readw(addr0 + 0x68) | 0x0900);
+ {
+ struct RUNTIME_9060 __iomem *ctl_addr = addr0;
+ plx_init(pdev, irq, ctl_addr);
+ cy_writew(&ctl_addr->intr_ctrl_stat,
+ readw(&ctl_addr->intr_ctrl_stat) | 0x0900);
break;
}
+ }
}
dev_info(&pdev->dev, "%s/PCI #%d found: %d channels starting from "
@@ -5179,22 +5138,23 @@
unsigned int i;
/* non-Z with old PLX */
- if (!IS_CYC_Z(*cinfo) && (readb(cinfo->base_addr + CyPLX_VER) & 0x0f) ==
+ if (!cy_is_Z(cinfo) && (readb(cinfo->base_addr + CyPLX_VER) & 0x0f) ==
PLX_9050)
- cy_writeb(cinfo->ctl_addr + 0x4c, 0);
+ cy_writeb(cinfo->ctl_addr.p9050 + 0x4c, 0);
else
#ifndef CONFIG_CYZ_INTR
- if (!IS_CYC_Z(*cinfo))
+ if (!cy_is_Z(cinfo))
#endif
- cy_writew(cinfo->ctl_addr + 0x68,
- readw(cinfo->ctl_addr + 0x68) & ~0x0900);
+ cy_writew(&cinfo->ctl_addr.p9060->intr_ctrl_stat,
+ readw(&cinfo->ctl_addr.p9060->intr_ctrl_stat) &
+ ~0x0900);
iounmap(cinfo->base_addr);
- if (cinfo->ctl_addr)
- iounmap(cinfo->ctl_addr);
+ if (cinfo->ctl_addr.p9050)
+ iounmap(cinfo->ctl_addr.p9050);
if (cinfo->irq
#ifndef CONFIG_CYZ_INTR
- && !IS_CYC_Z(*cinfo)
+ && !cy_is_Z(cinfo)
#endif /* CONFIG_CYZ_INTR */
)
free_irq(cinfo->irq, cinfo);
@@ -5240,7 +5200,7 @@
(cur_jifs - info->idle_stats.recv_idle)/
HZ, info->idle_stats.overruns,
/* FIXME: double check locking */
- (long)info->port.tty->ldisc.ops->num);
+ (long)info->port.tty->ldisc->ops->num);
else
seq_printf(m, "%3d %8lu %10lu %8lu "
"%10lu %8lu %9lu %6ld\n",
@@ -5386,11 +5346,11 @@
/* clear interrupt */
cy_writeb(card->base_addr + Cy_ClrIntr, 0);
iounmap(card->base_addr);
- if (card->ctl_addr)
- iounmap(card->ctl_addr);
+ if (card->ctl_addr.p9050)
+ iounmap(card->ctl_addr.p9050);
if (card->irq
#ifndef CONFIG_CYZ_INTR
- && !IS_CYC_Z(*card)
+ && !cy_is_Z(card)
#endif /* CONFIG_CYZ_INTR */
)
free_irq(card->irq, card);
diff --git a/drivers/char/epca.c b/drivers/char/epca.c
index af7c13c..abef1f7 100644
--- a/drivers/char/epca.c
+++ b/drivers/char/epca.c
@@ -745,7 +745,7 @@
return 0;
}
-static void epca_raise_dtr_rts(struct tty_port *port)
+static void epca_dtr_rts(struct tty_port *port, int onoff)
{
}
@@ -925,7 +925,7 @@
static const struct tty_port_operations epca_port_ops = {
.carrier_raised = epca_carrier_raised,
- .raise_dtr_rts = epca_raise_dtr_rts,
+ .dtr_rts = epca_dtr_rts,
};
static int info_open(struct tty_struct *tty, struct file *filp)
@@ -1518,7 +1518,7 @@
if (event & MODEMCHG_IND) {
/* A modem signal change has been indicated */
ch->imodem = mstat;
- if (test_bit(ASYNC_CHECK_CD, &ch->port.flags)) {
+ if (test_bit(ASYNCB_CHECK_CD, &ch->port.flags)) {
/* We are now receiving dcd */
if (mstat & ch->dcd)
wake_up_interruptible(&ch->port.open_wait);
@@ -1765,9 +1765,9 @@
* that the driver will wait on carrier detect.
*/
if (ts->c_cflag & CLOCAL)
- clear_bit(ASYNC_CHECK_CD, &ch->port.flags);
+ clear_bit(ASYNCB_CHECK_CD, &ch->port.flags);
else
- set_bit(ASYNC_CHECK_CD, &ch->port.flags);
+ set_bit(ASYNCB_CHECK_CD, &ch->port.flags);
mval = ch->m_dtr | ch->m_rts;
} /* End CBAUD not detected */
iflag = termios2digi_i(ch, ts->c_iflag);
@@ -2114,8 +2114,8 @@
tty_wait_until_sent(tty, 0);
} else {
/* ldisc lock already held in ioctl */
- if (tty->ldisc.ops->flush_buffer)
- tty->ldisc.ops->flush_buffer(tty);
+ if (tty->ldisc->ops->flush_buffer)
+ tty->ldisc->ops->flush_buffer(tty);
}
unlock_kernel();
/* Fall Thru */
@@ -2244,7 +2244,8 @@
if (test_and_clear_bit(EPCA_EVENT_HANGUP, &ch->event)) {
tty_hangup(tty);
wake_up_interruptible(&ch->port.open_wait);
- clear_bit(ASYNC_NORMAL_ACTIVE, &ch->port.flags);
+ clear_bit(ASYNCB_NORMAL_ACTIVE,
+ &ch->port.flags);
}
}
tty_kref_put(tty);
diff --git a/drivers/char/ip2/i2lib.c b/drivers/char/ip2/i2lib.c
index 0061e18..0d10b89 100644
--- a/drivers/char/ip2/i2lib.c
+++ b/drivers/char/ip2/i2lib.c
@@ -868,11 +868,11 @@
amountToMove = count;
}
// Move the first block
- pCh->pTTY->ldisc.ops->receive_buf( pCh->pTTY,
+ pCh->pTTY->ldisc->ops->receive_buf( pCh->pTTY,
&(pCh->Ibuf[stripIndex]), NULL, amountToMove );
// If we needed to wrap, do the second data move
if (count > amountToMove) {
- pCh->pTTY->ldisc.ops->receive_buf( pCh->pTTY,
+ pCh->pTTY->ldisc->ops->receive_buf( pCh->pTTY,
pCh->Ibuf, NULL, count - amountToMove );
}
// Bump and wrap the stripIndex all at once by the amount of data read. This
diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index afd9247..517271c 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -1315,8 +1315,8 @@
if (tty->pgrp)
kill_pgrp(tty->pgrp, sig, 1);
if (flush || !L_NOFLSH(tty)) {
- if ( tty->ldisc.ops->flush_buffer )
- tty->ldisc.ops->flush_buffer(tty);
+ if ( tty->ldisc->ops->flush_buffer )
+ tty->ldisc->ops->flush_buffer(tty);
i2InputFlush( tty->driver_data );
}
}
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index a59eac5..4d745a8 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -329,7 +329,7 @@
/* card->lock MUST NOT be held */
-static void isicom_raise_dtr_rts(struct tty_port *port)
+static void isicom_dtr_rts(struct tty_port *port, int on)
{
struct isi_port *ip = container_of(port, struct isi_port, port);
struct isi_board *card = ip->card;
@@ -339,10 +339,17 @@
if (!lock_card(card))
return;
- outw(0x8000 | (channel << card->shift_count) | 0x02, base);
- outw(0x0f04, base);
- InterruptTheCard(base);
- ip->status |= (ISI_DTR | ISI_RTS);
+ if (on) {
+ outw(0x8000 | (channel << card->shift_count) | 0x02, base);
+ outw(0x0f04, base);
+ InterruptTheCard(base);
+ ip->status |= (ISI_DTR | ISI_RTS);
+ } else {
+ outw(0x8000 | (channel << card->shift_count) | 0x02, base);
+ outw(0x0C04, base);
+ InterruptTheCard(base);
+ ip->status &= ~(ISI_DTR | ISI_RTS);
+ }
unlock_card(card);
}
@@ -1339,7 +1346,7 @@
static const struct tty_port_operations isicom_port_ops = {
.carrier_raised = isicom_carrier_raised,
- .raise_dtr_rts = isicom_raise_dtr_rts,
+ .dtr_rts = isicom_dtr_rts,
};
static int __devinit reset_card(struct pci_dev *pdev,
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index fff19f7..e18800c 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -1140,14 +1140,14 @@
return (portp->sigs & TIOCM_CD) ? 1 : 0;
}
-static void stli_raise_dtr_rts(struct tty_port *port)
+static void stli_dtr_rts(struct tty_port *port, int on)
{
struct stliport *portp = container_of(port, struct stliport, port);
struct stlibrd *brdp = stli_brds[portp->brdnr];
- stli_mkasysigs(&portp->asig, 1, 1);
+ stli_mkasysigs(&portp->asig, on, on);
if (stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig,
sizeof(asysigs_t), 0) < 0)
- printk(KERN_WARNING "istallion: dtr raise failed.\n");
+ printk(KERN_WARNING "istallion: dtr set failed.\n");
}
@@ -4417,7 +4417,7 @@
static const struct tty_port_operations stli_port_ops = {
.carrier_raised = stli_carrier_raised,
- .raise_dtr_rts = stli_raise_dtr_rts,
+ .dtr_rts = stli_dtr_rts,
};
/*****************************************************************************/
diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c
index 4a4cab7..65b6ff2 100644
--- a/drivers/char/moxa.c
+++ b/drivers/char/moxa.c
@@ -1184,6 +1184,11 @@
return -ENODEV;
}
+ if (port % MAX_PORTS_PER_BOARD >= brd->numPorts) {
+ mutex_unlock(&moxa_openlock);
+ return -ENODEV;
+ }
+
ch = &brd->ports[port % MAX_PORTS_PER_BOARD];
ch->port.count++;
tty->driver_data = ch;
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 13f8871..9533f43 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -547,14 +547,18 @@
return (inb(mp->ioaddr + UART_MSR) & UART_MSR_DCD)?1:0;
}
-static void mxser_raise_dtr_rts(struct tty_port *port)
+static void mxser_dtr_rts(struct tty_port *port, int on)
{
struct mxser_port *mp = container_of(port, struct mxser_port, port);
unsigned long flags;
spin_lock_irqsave(&mp->slock, flags);
- outb(inb(mp->ioaddr + UART_MCR) |
- UART_MCR_DTR | UART_MCR_RTS, mp->ioaddr + UART_MCR);
+ if (on)
+ outb(inb(mp->ioaddr + UART_MCR) |
+ UART_MCR_DTR | UART_MCR_RTS, mp->ioaddr + UART_MCR);
+ else
+ outb(inb(mp->ioaddr + UART_MCR)&~(UART_MCR_DTR | UART_MCR_RTS),
+ mp->ioaddr + UART_MCR);
spin_unlock_irqrestore(&mp->slock, flags);
}
@@ -2356,7 +2360,7 @@
struct tty_port_operations mxser_port_ops = {
.carrier_raised = mxser_carrier_raised,
- .raise_dtr_rts = mxser_raise_dtr_rts,
+ .dtr_rts = mxser_dtr_rts,
};
/*
diff --git a/drivers/char/n_hdlc.c b/drivers/char/n_hdlc.c
index bacb3e2..461ece5 100644
--- a/drivers/char/n_hdlc.c
+++ b/drivers/char/n_hdlc.c
@@ -342,8 +342,8 @@
#endif
/* Flush any pending characters in the driver and discipline. */
- if (tty->ldisc.ops->flush_buffer)
- tty->ldisc.ops->flush_buffer(tty);
+ if (tty->ldisc->ops->flush_buffer)
+ tty->ldisc->ops->flush_buffer(tty);
tty_driver_flush_buffer(tty);
diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c
index f6f0e4e..94a5d50 100644
--- a/drivers/char/n_tty.c
+++ b/drivers/char/n_tty.c
@@ -73,24 +73,6 @@
#define ECHO_OP_SET_CANON_COL 0x81
#define ECHO_OP_ERASE_TAB 0x82
-static inline unsigned char *alloc_buf(void)
-{
- gfp_t prio = in_interrupt() ? GFP_ATOMIC : GFP_KERNEL;
-
- if (PAGE_SIZE != N_TTY_BUF_SIZE)
- return kmalloc(N_TTY_BUF_SIZE, prio);
- else
- return (unsigned char *)__get_free_page(prio);
-}
-
-static inline void free_buf(unsigned char *buf)
-{
- if (PAGE_SIZE != N_TTY_BUF_SIZE)
- kfree(buf);
- else
- free_page((unsigned long) buf);
-}
-
static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
unsigned char __user *ptr)
{
@@ -1558,11 +1540,11 @@
{
n_tty_flush_buffer(tty);
if (tty->read_buf) {
- free_buf(tty->read_buf);
+ kfree(tty->read_buf);
tty->read_buf = NULL;
}
if (tty->echo_buf) {
- free_buf(tty->echo_buf);
+ kfree(tty->echo_buf);
tty->echo_buf = NULL;
}
}
@@ -1584,17 +1566,16 @@
/* These are ugly. Currently a malloc failure here can panic */
if (!tty->read_buf) {
- tty->read_buf = alloc_buf();
+ tty->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
if (!tty->read_buf)
return -ENOMEM;
}
if (!tty->echo_buf) {
- tty->echo_buf = alloc_buf();
+ tty->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
+
if (!tty->echo_buf)
return -ENOMEM;
}
- memset(tty->read_buf, 0, N_TTY_BUF_SIZE);
- memset(tty->echo_buf, 0, N_TTY_BUF_SIZE);
reset_buffer_flags(tty);
tty->column = 0;
n_tty_set_termios(tty, NULL);
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index 19d79fc..77b3648 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -383,7 +383,7 @@
static void tx_timeout(unsigned long context);
static int carrier_raised(struct tty_port *port);
-static void raise_dtr_rts(struct tty_port *port);
+static void dtr_rts(struct tty_port *port, int onoff);
#if SYNCLINK_GENERIC_HDLC
#define dev_to_port(D) (dev_to_hdlc(D)->priv)
@@ -513,7 +513,7 @@
static const struct tty_port_operations mgslpc_port_ops = {
.carrier_raised = carrier_raised,
- .raise_dtr_rts = raise_dtr_rts
+ .dtr_rts = dtr_rts
};
static int mgslpc_probe(struct pcmcia_device *link)
@@ -2528,13 +2528,16 @@
return 0;
}
-static void raise_dtr_rts(struct tty_port *port)
+static void dtr_rts(struct tty_port *port, int onoff)
{
MGSLPC_INFO *info = container_of(port, MGSLPC_INFO, port);
unsigned long flags;
spin_lock_irqsave(&info->lock,flags);
- info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+ if (onoff)
+ info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+ else
+ info->serial_signals &= ~SerialSignal_RTS + SerialSignal_DTR;
set_signals(info);
spin_unlock_irqrestore(&info->lock,flags);
}
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index 31038a0..5acd29e 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -30,7 +30,6 @@
#include <asm/system.h>
-/* These are global because they are accessed in tty_io.c */
#ifdef CONFIG_UNIX98_PTYS
static struct tty_driver *ptm_driver;
static struct tty_driver *pts_driver;
@@ -111,7 +110,7 @@
c = to->receive_room;
if (c > count)
c = count;
- to->ldisc.ops->receive_buf(to, buf, NULL, c);
+ to->ldisc->ops->receive_buf(to, buf, NULL, c);
return c;
}
@@ -149,11 +148,11 @@
int count;
/* We should get the line discipline lock for "tty->link" */
- if (!to || !to->ldisc.ops->chars_in_buffer)
+ if (!to || !to->ldisc->ops->chars_in_buffer)
return 0;
/* The ldisc must report 0 if no characters available to be read */
- count = to->ldisc.ops->chars_in_buffer(to);
+ count = to->ldisc->ops->chars_in_buffer(to);
if (tty->driver->subtype == PTY_TYPE_SLAVE)
return count;
@@ -187,8 +186,8 @@
if (!to)
return;
- if (to->ldisc.ops->flush_buffer)
- to->ldisc.ops->flush_buffer(to);
+ if (to->ldisc->ops->flush_buffer)
+ to->ldisc->ops->flush_buffer(to);
if (to->packet) {
spin_lock_irqsave(&tty->ctrl_lock, flags);
diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c
index f59fc5c..63d5b62 100644
--- a/drivers/char/rocket.c
+++ b/drivers/char/rocket.c
@@ -872,11 +872,16 @@
return (sGetChanStatusLo(&info->channel) & CD_ACT) ? 1 : 0;
}
-static void raise_dtr_rts(struct tty_port *port)
+static void dtr_rts(struct tty_port *port, int on)
{
struct r_port *info = container_of(port, struct r_port, port);
- sSetDTR(&info->channel);
- sSetRTS(&info->channel);
+ if (on) {
+ sSetDTR(&info->channel);
+ sSetRTS(&info->channel);
+ } else {
+ sClrDTR(&info->channel);
+ sClrRTS(&info->channel);
+ }
}
/*
@@ -934,7 +939,7 @@
/*
* Info->count is now 1; so it's safe to sleep now.
*/
- if (!test_bit(ASYNC_INITIALIZED, &port->flags)) {
+ if (!test_bit(ASYNCB_INITIALIZED, &port->flags)) {
cp = &info->channel;
sSetRxTrigger(cp, TRIG_1);
if (sGetChanStatus(cp) & CD_ACT)
@@ -958,7 +963,7 @@
sEnRxFIFO(cp);
sEnTransmit(cp);
- set_bit(ASYNC_INITIALIZED, &info->port.flags);
+ set_bit(ASYNCB_INITIALIZED, &info->port.flags);
/*
* Set up the tty->alt_speed kludge
@@ -1641,7 +1646,7 @@
/* Write remaining data into the port's xmit_buf */
while (1) {
/* Hung up ? */
- if (!test_bit(ASYNC_NORMAL_ACTIVE, &info->port.flags))
+ if (!test_bit(ASYNCB_NORMAL_ACTIVE, &info->port.flags))
goto end;
c = min(count, XMIT_BUF_SIZE - info->xmit_cnt - 1);
c = min(c, XMIT_BUF_SIZE - info->xmit_head);
@@ -2250,7 +2255,7 @@
static const struct tty_port_operations rocket_port_ops = {
.carrier_raised = carrier_raised,
- .raise_dtr_rts = raise_dtr_rts,
+ .dtr_rts = dtr_rts,
};
/*
diff --git a/drivers/char/selection.c b/drivers/char/selection.c
index cb8ca56..f97b9e8 100644
--- a/drivers/char/selection.c
+++ b/drivers/char/selection.c
@@ -327,7 +327,7 @@
}
count = sel_buffer_lth - pasted;
count = min(count, tty->receive_room);
- tty->ldisc.ops->receive_buf(tty, sel_buffer + pasted,
+ tty->ldisc->ops->receive_buf(tty, sel_buffer + pasted,
NULL, count);
pasted += count;
}
diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c
index 2ad813a..53e504f 100644
--- a/drivers/char/stallion.c
+++ b/drivers/char/stallion.c
@@ -772,11 +772,11 @@
return (portp->sigs & TIOCM_CD) ? 1 : 0;
}
-static void stl_raise_dtr_rts(struct tty_port *port)
+static void stl_dtr_rts(struct tty_port *port, int on)
{
struct stlport *portp = container_of(port, struct stlport, port);
/* Takes brd_lock internally */
- stl_setsignals(portp, 1, 1);
+ stl_setsignals(portp, on, on);
}
/*****************************************************************************/
@@ -2547,7 +2547,7 @@
static const struct tty_port_operations stl_port_ops = {
.carrier_raised = stl_carrier_raised,
- .raise_dtr_rts = stl_raise_dtr_rts,
+ .dtr_rts = stl_dtr_rts,
};
/*****************************************************************************/
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index afd0b26..afded3a 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -3247,13 +3247,16 @@
return (info->serial_signals & SerialSignal_DCD) ? 1 : 0;
}
-static void raise_dtr_rts(struct tty_port *port)
+static void dtr_rts(struct tty_port *port, int on)
{
struct mgsl_struct *info = container_of(port, struct mgsl_struct, port);
unsigned long flags;
spin_lock_irqsave(&info->irq_spinlock,flags);
- info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+ if (on)
+ info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+ else
+ info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
usc_set_serial_signals(info);
spin_unlock_irqrestore(&info->irq_spinlock,flags);
}
@@ -4258,7 +4261,7 @@
static const struct tty_port_operations mgsl_port_ops = {
.carrier_raised = carrier_raised,
- .raise_dtr_rts = raise_dtr_rts,
+ .dtr_rts = dtr_rts,
};
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 5e25649..1386625 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -214,6 +214,7 @@
#define set_desc_next(a,b) (a).next = cpu_to_le32((unsigned int)(b))
#define set_desc_count(a,b)(a).count = cpu_to_le16((unsigned short)(b))
#define set_desc_eof(a,b) (a).status = cpu_to_le16((b) ? (le16_to_cpu((a).status) | BIT0) : (le16_to_cpu((a).status) & ~BIT0))
+#define set_desc_status(a, b) (a).status = cpu_to_le16((unsigned short)(b))
#define desc_count(a) (le16_to_cpu((a).count))
#define desc_status(a) (le16_to_cpu((a).status))
#define desc_complete(a) (le16_to_cpu((a).status) & BIT15)
@@ -297,6 +298,7 @@
u32 max_frame_size; /* as set by device config */
unsigned int rbuf_fill_level;
+ unsigned int rx_pio;
unsigned int if_mode;
unsigned int base_clock;
@@ -331,6 +333,8 @@
struct slgt_desc *rbufs;
unsigned int rbuf_current;
unsigned int rbuf_index;
+ unsigned int rbuf_fill_index;
+ unsigned short rbuf_fill_count;
unsigned int tbuf_count;
struct slgt_desc *tbufs;
@@ -2110,6 +2114,40 @@
info->pending_bh |= BH_STATUS;
}
+static void isr_rxdata(struct slgt_info *info)
+{
+ unsigned int count = info->rbuf_fill_count;
+ unsigned int i = info->rbuf_fill_index;
+ unsigned short reg;
+
+ while (rd_reg16(info, SSR) & IRQ_RXDATA) {
+ reg = rd_reg16(info, RDR);
+ DBGISR(("isr_rxdata %s RDR=%04X\n", info->device_name, reg));
+ if (desc_complete(info->rbufs[i])) {
+ /* all buffers full */
+ rx_stop(info);
+ info->rx_restart = 1;
+ continue;
+ }
+ info->rbufs[i].buf[count++] = (unsigned char)reg;
+ /* async mode saves status byte to buffer for each data byte */
+ if (info->params.mode == MGSL_MODE_ASYNC)
+ info->rbufs[i].buf[count++] = (unsigned char)(reg >> 8);
+ if (count == info->rbuf_fill_level || (reg & BIT10)) {
+ /* buffer full or end of frame */
+ set_desc_count(info->rbufs[i], count);
+ set_desc_status(info->rbufs[i], BIT15 | (reg >> 8));
+ info->rbuf_fill_count = count = 0;
+ if (++i == info->rbuf_count)
+ i = 0;
+ info->pending_bh |= BH_RECEIVE;
+ }
+ }
+
+ info->rbuf_fill_index = i;
+ info->rbuf_fill_count = count;
+}
+
static void isr_serial(struct slgt_info *info)
{
unsigned short status = rd_reg16(info, SSR);
@@ -2125,6 +2163,8 @@
if (info->tx_count)
isr_txeom(info, status);
}
+ if (info->rx_pio && (status & IRQ_RXDATA))
+ isr_rxdata(info);
if ((status & IRQ_RXBREAK) && (status & RXBREAK)) {
info->icount.brk++;
/* process break detection if tty control allows */
@@ -2141,7 +2181,8 @@
} else {
if (status & (IRQ_TXIDLE + IRQ_TXUNDER))
isr_txeom(info, status);
-
+ if (info->rx_pio && (status & IRQ_RXDATA))
+ isr_rxdata(info);
if (status & IRQ_RXIDLE) {
if (status & RXIDLE)
info->icount.rxidle++;
@@ -2642,6 +2683,10 @@
return -EINVAL;
}
info->rbuf_fill_level = rbuf_fill_level;
+ if (rbuf_fill_level < 128)
+ info->rx_pio = 1; /* PIO mode */
+ else
+ info->rx_pio = 0; /* DMA mode */
rx_stop(info); /* restart receiver to use new fill level */
}
@@ -3099,13 +3144,16 @@
return (info->signals & SerialSignal_DCD) ? 1 : 0;
}
-static void raise_dtr_rts(struct tty_port *port)
+static void dtr_rts(struct tty_port *port, int on)
{
unsigned long flags;
struct slgt_info *info = container_of(port, struct slgt_info, port);
spin_lock_irqsave(&info->lock,flags);
- info->signals |= SerialSignal_RTS + SerialSignal_DTR;
+ if (on)
+ info->signals |= SerialSignal_RTS + SerialSignal_DTR;
+ else
+ info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
set_signals(info);
spin_unlock_irqrestore(&info->lock,flags);
}
@@ -3419,7 +3467,7 @@
static const struct tty_port_operations slgt_port_ops = {
.carrier_raised = carrier_raised,
- .raise_dtr_rts = raise_dtr_rts,
+ .dtr_rts = dtr_rts,
};
/*
@@ -3841,15 +3889,27 @@
rdma_reset(info);
reset_rbufs(info);
- /* set 1st descriptor address */
- wr_reg32(info, RDDAR, info->rbufs[0].pdesc);
-
- if (info->params.mode != MGSL_MODE_ASYNC) {
- /* enable rx DMA and DMA interrupt */
- wr_reg32(info, RDCSR, (BIT2 + BIT0));
+ if (info->rx_pio) {
+ /* rx request when rx FIFO not empty */
+ wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) & ~BIT14));
+ slgt_irq_on(info, IRQ_RXDATA);
+ if (info->params.mode == MGSL_MODE_ASYNC) {
+ /* enable saving of rx status */
+ wr_reg32(info, RDCSR, BIT6);
+ }
} else {
- /* enable saving of rx status, rx DMA and DMA interrupt */
- wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0));
+ /* rx request when rx FIFO half full */
+ wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT14));
+ /* set 1st descriptor address */
+ wr_reg32(info, RDDAR, info->rbufs[0].pdesc);
+
+ if (info->params.mode != MGSL_MODE_ASYNC) {
+ /* enable rx DMA and DMA interrupt */
+ wr_reg32(info, RDCSR, (BIT2 + BIT0));
+ } else {
+ /* enable saving of rx status, rx DMA and DMA interrupt */
+ wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0));
+ }
}
slgt_irq_on(info, IRQ_RXOVER);
@@ -4467,6 +4527,8 @@
static void reset_rbufs(struct slgt_info *info)
{
free_rbufs(info, 0, info->rbuf_count - 1);
+ info->rbuf_fill_index = 0;
+ info->rbuf_fill_count = 0;
}
/*
diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c
index 26de60e..6f727e3 100644
--- a/drivers/char/synclinkmp.c
+++ b/drivers/char/synclinkmp.c
@@ -3277,13 +3277,16 @@
return (info->serial_signals & SerialSignal_DCD) ? 1 : 0;
}
-static void raise_dtr_rts(struct tty_port *port)
+static void dtr_rts(struct tty_port *port, int on)
{
SLMP_INFO *info = container_of(port, SLMP_INFO, port);
unsigned long flags;
spin_lock_irqsave(&info->lock,flags);
- info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+ if (on)
+ info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+ else
+ info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
set_signals(info);
spin_unlock_irqrestore(&info->lock,flags);
}
@@ -3746,7 +3749,7 @@
static const struct tty_port_operations port_ops = {
.carrier_raised = carrier_raised,
- .raise_dtr_rts = raise_dtr_rts,
+ .dtr_rts = dtr_rts,
};
/* Allocate and initialize a device instance structure
diff --git a/drivers/char/tty_audit.c b/drivers/char/tty_audit.c
index 55ba6f1..ac16fbe 100644
--- a/drivers/char/tty_audit.c
+++ b/drivers/char/tty_audit.c
@@ -29,10 +29,7 @@
buf = kmalloc(sizeof(*buf), GFP_KERNEL);
if (!buf)
goto err;
- if (PAGE_SIZE != N_TTY_BUF_SIZE)
- buf->data = kmalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
- else
- buf->data = (unsigned char *)__get_free_page(GFP_KERNEL);
+ buf->data = kmalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
if (!buf->data)
goto err_buf;
atomic_set(&buf->count, 1);
@@ -52,10 +49,7 @@
static void tty_audit_buf_free(struct tty_audit_buf *buf)
{
WARN_ON(buf->valid != 0);
- if (PAGE_SIZE != N_TTY_BUF_SIZE)
- kfree(buf->data);
- else
- free_page((unsigned long)buf->data);
+ kfree(buf->data);
kfree(buf);
}
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 66b99a2..939e198 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -295,7 +295,7 @@
struct tty_driver *p, *res = NULL;
int tty_line = 0;
int len;
- char *str;
+ char *str, *stp;
for (str = name; *str; str++)
if ((*str >= '0' && *str <= '9') || *str == ',')
@@ -311,13 +311,14 @@
list_for_each_entry(p, &tty_drivers, tty_drivers) {
if (strncmp(name, p->name, len) != 0)
continue;
- if (*str == ',')
- str++;
- if (*str == '\0')
- str = NULL;
+ stp = str;
+ if (*stp == ',')
+ stp++;
+ if (*stp == '\0')
+ stp = NULL;
if (tty_line >= 0 && tty_line <= p->num && p->ops &&
- p->ops->poll_init && !p->ops->poll_init(p, tty_line, str)) {
+ p->ops->poll_init && !p->ops->poll_init(p, tty_line, stp)) {
res = tty_driver_kref_get(p);
*line = tty_line;
break;
@@ -470,43 +471,6 @@
EXPORT_SYMBOL_GPL(tty_wakeup);
/**
- * tty_ldisc_flush - flush line discipline queue
- * @tty: tty
- *
- * Flush the line discipline queue (if any) for this tty. If there
- * is no line discipline active this is a no-op.
- */
-
-void tty_ldisc_flush(struct tty_struct *tty)
-{
- struct tty_ldisc *ld = tty_ldisc_ref(tty);
- if (ld) {
- if (ld->ops->flush_buffer)
- ld->ops->flush_buffer(tty);
- tty_ldisc_deref(ld);
- }
- tty_buffer_flush(tty);
-}
-
-EXPORT_SYMBOL_GPL(tty_ldisc_flush);
-
-/**
- * tty_reset_termios - reset terminal state
- * @tty: tty to reset
- *
- * Restore a terminal to the driver default state
- */
-
-static void tty_reset_termios(struct tty_struct *tty)
-{
- mutex_lock(&tty->termios_mutex);
- *tty->termios = tty->driver->init_termios;
- tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios);
- tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios);
- mutex_unlock(&tty->termios_mutex);
-}
-
-/**
* do_tty_hangup - actual handler for hangup events
* @work: tty device
*
@@ -535,7 +499,6 @@
struct file *cons_filp = NULL;
struct file *filp, *f = NULL;
struct task_struct *p;
- struct tty_ldisc *ld;
int closecount = 0, n;
unsigned long flags;
int refs = 0;
@@ -566,40 +529,8 @@
filp->f_op = &hung_up_tty_fops;
}
file_list_unlock();
- /*
- * FIXME! What are the locking issues here? This may me overdoing
- * things... This question is especially important now that we've
- * removed the irqlock.
- */
- ld = tty_ldisc_ref(tty);
- if (ld != NULL) {
- /* We may have no line discipline at this point */
- if (ld->ops->flush_buffer)
- ld->ops->flush_buffer(tty);
- tty_driver_flush_buffer(tty);
- if ((test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) &&
- ld->ops->write_wakeup)
- ld->ops->write_wakeup(tty);
- if (ld->ops->hangup)
- ld->ops->hangup(tty);
- }
- /*
- * FIXME: Once we trust the LDISC code better we can wait here for
- * ldisc completion and fix the driver call race
- */
- wake_up_interruptible_poll(&tty->write_wait, POLLOUT);
- wake_up_interruptible_poll(&tty->read_wait, POLLIN);
- /*
- * Shutdown the current line discipline, and reset it to
- * N_TTY.
- */
- if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS)
- tty_reset_termios(tty);
- /* Defer ldisc switch */
- /* tty_deferred_ldisc_switch(N_TTY);
- This should get done automatically when the port closes and
- tty_release is called */
+ tty_ldisc_hangup(tty);
read_lock(&tasklist_lock);
if (tty->session) {
@@ -628,12 +559,15 @@
read_unlock(&tasklist_lock);
spin_lock_irqsave(&tty->ctrl_lock, flags);
- tty->flags = 0;
+ clear_bit(TTY_THROTTLED, &tty->flags);
+ clear_bit(TTY_PUSH, &tty->flags);
+ clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
put_pid(tty->session);
put_pid(tty->pgrp);
tty->session = NULL;
tty->pgrp = NULL;
tty->ctrl_status = 0;
+ set_bit(TTY_HUPPED, &tty->flags);
spin_unlock_irqrestore(&tty->ctrl_lock, flags);
/* Account for the p->signal references we killed */
@@ -659,10 +593,7 @@
* can't yet guarantee all that.
*/
set_bit(TTY_HUPPED, &tty->flags);
- if (ld) {
- tty_ldisc_enable(tty);
- tty_ldisc_deref(ld);
- }
+ tty_ldisc_enable(tty);
unlock_kernel();
if (f)
fput(f);
@@ -2480,6 +2411,24 @@
return tty->ops->tiocmset(tty, file, set, clear);
}
+struct tty_struct *tty_pair_get_tty(struct tty_struct *tty)
+{
+ if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
+ tty->driver->subtype == PTY_TYPE_MASTER)
+ tty = tty->link;
+ return tty;
+}
+EXPORT_SYMBOL(tty_pair_get_tty);
+
+struct tty_struct *tty_pair_get_pty(struct tty_struct *tty)
+{
+ if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
+ tty->driver->subtype == PTY_TYPE_MASTER)
+ return tty;
+ return tty->link;
+}
+EXPORT_SYMBOL(tty_pair_get_pty);
+
/*
* Split this up, as gcc can choke on it otherwise..
*/
@@ -2495,11 +2444,7 @@
if (tty_paranoia_check(tty, inode, "tty_ioctl"))
return -EINVAL;
- real_tty = tty;
- if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
- tty->driver->subtype == PTY_TYPE_MASTER)
- real_tty = tty->link;
-
+ real_tty = tty_pair_get_tty(tty);
/*
* Factor out some common prep work
@@ -2555,7 +2500,7 @@
case TIOCGSID:
return tiocgsid(tty, real_tty, p);
case TIOCGETD:
- return put_user(tty->ldisc.ops->num, (int __user *)p);
+ return put_user(tty->ldisc->ops->num, (int __user *)p);
case TIOCSETD:
return tiocsetd(tty, p);
/*
@@ -2770,6 +2715,7 @@
tty->buf.head = tty->buf.tail = NULL;
tty_buffer_init(tty);
mutex_init(&tty->termios_mutex);
+ mutex_init(&tty->ldisc_mutex);
init_waitqueue_head(&tty->write_wait);
init_waitqueue_head(&tty->read_wait);
INIT_WORK(&tty->hangup_work, do_tty_hangup);
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index 6f4c7d0..8116bb1c 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -97,14 +97,19 @@
* @tty: terminal
*
* Indicate that a tty should stop transmitting data down the stack.
+ * Takes the termios mutex to protect against parallel throttle/unthrottle
+ * and also to ensure the driver can consistently reference its own
+ * termios data at this point when implementing software flow control.
*/
void tty_throttle(struct tty_struct *tty)
{
+ mutex_lock(&tty->termios_mutex);
/* check TTY_THROTTLED first so it indicates our state */
if (!test_and_set_bit(TTY_THROTTLED, &tty->flags) &&
tty->ops->throttle)
tty->ops->throttle(tty);
+ mutex_unlock(&tty->termios_mutex);
}
EXPORT_SYMBOL(tty_throttle);
@@ -113,13 +118,21 @@
* @tty: terminal
*
* Indicate that a tty may continue transmitting data down the stack.
+ * Takes the termios mutex to protect against parallel throttle/unthrottle
+ * and also to ensure the driver can consistently reference its own
+ * termios data at this point when implementing software flow control.
+ *
+ * Drivers should however remember that the stack can issue a throttle,
+ * then change flow control method, then unthrottle.
*/
void tty_unthrottle(struct tty_struct *tty)
{
+ mutex_lock(&tty->termios_mutex);
if (test_and_clear_bit(TTY_THROTTLED, &tty->flags) &&
tty->ops->unthrottle)
tty->ops->unthrottle(tty);
+ mutex_unlock(&tty->termios_mutex);
}
EXPORT_SYMBOL(tty_unthrottle);
@@ -613,9 +626,25 @@
return 0;
}
+static void copy_termios(struct tty_struct *tty, struct ktermios *kterm)
+{
+ mutex_lock(&tty->termios_mutex);
+ memcpy(kterm, tty->termios, sizeof(struct ktermios));
+ mutex_unlock(&tty->termios_mutex);
+}
+
+static void copy_termios_locked(struct tty_struct *tty, struct ktermios *kterm)
+{
+ mutex_lock(&tty->termios_mutex);
+ memcpy(kterm, tty->termios_locked, sizeof(struct ktermios));
+ mutex_unlock(&tty->termios_mutex);
+}
+
static int get_termio(struct tty_struct *tty, struct termio __user *termio)
{
- if (kernel_termios_to_user_termio(termio, tty->termios))
+ struct ktermios kterm;
+ copy_termios(tty, &kterm);
+ if (kernel_termios_to_user_termio(termio, &kterm))
return -EFAULT;
return 0;
}
@@ -917,6 +946,8 @@
struct tty_struct *real_tty;
void __user *p = (void __user *)arg;
int ret = 0;
+ struct ktermios kterm;
+ struct termiox ktermx;
if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
tty->driver->subtype == PTY_TYPE_MASTER)
@@ -952,23 +983,20 @@
return set_termios(real_tty, p, TERMIOS_OLD);
#ifndef TCGETS2
case TCGETS:
- mutex_lock(&real_tty->termios_mutex);
- if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios))
+ copy_termios(real_tty, &kterm);
+ if (kernel_termios_to_user_termios((struct termios __user *)arg, &kterm))
ret = -EFAULT;
- mutex_unlock(&real_tty->termios_mutex);
return ret;
#else
case TCGETS:
- mutex_lock(&real_tty->termios_mutex);
- if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios))
+ copy_termios(real_tty, &kterm);
+ if (kernel_termios_to_user_termios_1((struct termios __user *)arg, &kterm))
ret = -EFAULT;
- mutex_unlock(&real_tty->termios_mutex);
return ret;
case TCGETS2:
- mutex_lock(&real_tty->termios_mutex);
- if (kernel_termios_to_user_termios((struct termios2 __user *)arg, real_tty->termios))
+ copy_termios(real_tty, &kterm);
+ if (kernel_termios_to_user_termios((struct termios2 __user *)arg, &kterm))
ret = -EFAULT;
- mutex_unlock(&real_tty->termios_mutex);
return ret;
case TCSETSF2:
return set_termios(real_tty, p, TERMIOS_FLUSH | TERMIOS_WAIT);
@@ -987,34 +1015,36 @@
return set_termios(real_tty, p, TERMIOS_TERMIO);
#ifndef TCGETS2
case TIOCGLCKTRMIOS:
- mutex_lock(&real_tty->termios_mutex);
- if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios_locked))
+ copy_termios_locked(real_tty, &kterm);
+ if (kernel_termios_to_user_termios((struct termios __user *)arg, &kterm))
ret = -EFAULT;
- mutex_unlock(&real_tty->termios_mutex);
return ret;
case TIOCSLCKTRMIOS:
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- mutex_lock(&real_tty->termios_mutex);
- if (user_termios_to_kernel_termios(real_tty->termios_locked,
+ copy_termios_locked(real_tty, &kterm);
+ if (user_termios_to_kernel_termios(&kterm,
(struct termios __user *) arg))
- ret = -EFAULT;
+ return -EFAULT;
+ mutex_lock(&real_tty->termios_mutex);
+ memcpy(real_tty->termios_locked, &kterm, sizeof(struct ktermios));
mutex_unlock(&real_tty->termios_mutex);
- return ret;
+ return 0;
#else
case TIOCGLCKTRMIOS:
- mutex_lock(&real_tty->termios_mutex);
- if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios_locked))
+ copy_termios_locked(real_tty, &kterm);
+ if (kernel_termios_to_user_termios_1((struct termios __user *)arg, &kterm))
ret = -EFAULT;
- mutex_unlock(&real_tty->termios_mutex);
return ret;
case TIOCSLCKTRMIOS:
if (!capable(CAP_SYS_ADMIN))
- ret = -EPERM;
- mutex_lock(&real_tty->termios_mutex);
- if (user_termios_to_kernel_termios_1(real_tty->termios_locked,
+ return -EPERM;
+ copy_termios_locked(real_tty, &kterm);
+ if (user_termios_to_kernel_termios_1(&kterm,
(struct termios __user *) arg))
- ret = -EFAULT;
+ return -EFAULT;
+ mutex_lock(&real_tty->termios_mutex);
+ memcpy(real_tty->termios_locked, &kterm, sizeof(struct ktermios));
mutex_unlock(&real_tty->termios_mutex);
return ret;
#endif
@@ -1023,9 +1053,10 @@
if (real_tty->termiox == NULL)
return -EINVAL;
mutex_lock(&real_tty->termios_mutex);
- if (copy_to_user(p, real_tty->termiox, sizeof(struct termiox)))
- ret = -EFAULT;
+ memcpy(&ktermx, real_tty->termiox, sizeof(struct termiox));
mutex_unlock(&real_tty->termios_mutex);
+ if (copy_to_user(p, &ktermx, sizeof(struct termiox)))
+ ret = -EFAULT;
return ret;
case TCSETX:
return set_termiox(real_tty, p, 0);
@@ -1035,10 +1066,9 @@
return set_termiox(real_tty, p, TERMIOS_FLUSH);
#endif
case TIOCGSOFTCAR:
- mutex_lock(&real_tty->termios_mutex);
- ret = put_user(C_CLOCAL(real_tty) ? 1 : 0,
+ copy_termios(real_tty, &kterm);
+ ret = put_user((kterm.c_cflag & CLOCAL) ? 1 : 0,
(int __user *)arg);
- mutex_unlock(&real_tty->termios_mutex);
return ret;
case TIOCSSOFTCAR:
if (get_user(arg, (unsigned int __user *) arg))
diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c
index f78f5b0..39c8f86 100644
--- a/drivers/char/tty_ldisc.c
+++ b/drivers/char/tty_ldisc.c
@@ -115,19 +115,22 @@
/**
* tty_ldisc_try_get - try and reference an ldisc
* @disc: ldisc number
- * @ld: tty ldisc structure to complete
*
* Attempt to open and lock a line discipline into place. Return
- * the line discipline refcounted and assigned in ld. On an error
- * report the error code back
+ * the line discipline refcounted or an error.
*/
-static int tty_ldisc_try_get(int disc, struct tty_ldisc *ld)
+static struct tty_ldisc *tty_ldisc_try_get(int disc)
{
unsigned long flags;
+ struct tty_ldisc *ld;
struct tty_ldisc_ops *ldops;
int err = -EINVAL;
-
+
+ ld = kmalloc(sizeof(struct tty_ldisc), GFP_KERNEL);
+ if (ld == NULL)
+ return ERR_PTR(-ENOMEM);
+
spin_lock_irqsave(&tty_ldisc_lock, flags);
ld->ops = NULL;
ldops = tty_ldiscs[disc];
@@ -140,17 +143,19 @@
/* lock it */
ldops->refcount++;
ld->ops = ldops;
+ ld->refcount = 0;
err = 0;
}
}
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
- return err;
+ if (err)
+ return ERR_PTR(err);
+ return ld;
}
/**
* tty_ldisc_get - take a reference to an ldisc
* @disc: ldisc number
- * @ld: tty line discipline structure to use
*
* Takes a reference to a line discipline. Deals with refcounts and
* module locking counts. Returns NULL if the discipline is not available.
@@ -161,52 +166,54 @@
* takes tty_ldisc_lock to guard against ldisc races
*/
-static int tty_ldisc_get(int disc, struct tty_ldisc *ld)
+static struct tty_ldisc *tty_ldisc_get(int disc)
{
- int err;
+ struct tty_ldisc *ld;
if (disc < N_TTY || disc >= NR_LDISCS)
- return -EINVAL;
- err = tty_ldisc_try_get(disc, ld);
- if (err < 0) {
+ return ERR_PTR(-EINVAL);
+ ld = tty_ldisc_try_get(disc);
+ if (IS_ERR(ld)) {
request_module("tty-ldisc-%d", disc);
- err = tty_ldisc_try_get(disc, ld);
+ ld = tty_ldisc_try_get(disc);
}
- return err;
+ return ld;
}
/**
* tty_ldisc_put - drop ldisc reference
- * @disc: ldisc number
+ * @ld: ldisc
*
* Drop a reference to a line discipline. Manage refcounts and
- * module usage counts
+ * module usage counts. Free the ldisc once the recount hits zero.
*
* Locking:
* takes tty_ldisc_lock to guard against ldisc races
*/
-static void tty_ldisc_put(struct tty_ldisc_ops *ld)
+static void tty_ldisc_put(struct tty_ldisc *ld)
{
unsigned long flags;
- int disc = ld->num;
+ int disc = ld->ops->num;
+ struct tty_ldisc_ops *ldo;
BUG_ON(disc < N_TTY || disc >= NR_LDISCS);
spin_lock_irqsave(&tty_ldisc_lock, flags);
- ld = tty_ldiscs[disc];
- BUG_ON(ld->refcount == 0);
- ld->refcount--;
- module_put(ld->owner);
+ ldo = tty_ldiscs[disc];
+ BUG_ON(ldo->refcount == 0);
+ ldo->refcount--;
+ module_put(ldo->owner);
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+ kfree(ld);
}
-static void * tty_ldiscs_seq_start(struct seq_file *m, loff_t *pos)
+static void *tty_ldiscs_seq_start(struct seq_file *m, loff_t *pos)
{
return (*pos < NR_LDISCS) ? pos : NULL;
}
-static void * tty_ldiscs_seq_next(struct seq_file *m, void *v, loff_t *pos)
+static void *tty_ldiscs_seq_next(struct seq_file *m, void *v, loff_t *pos)
{
(*pos)++;
return (*pos < NR_LDISCS) ? pos : NULL;
@@ -219,12 +226,13 @@
static int tty_ldiscs_seq_show(struct seq_file *m, void *v)
{
int i = *(loff_t *)v;
- struct tty_ldisc ld;
-
- if (tty_ldisc_get(i, &ld) < 0)
+ struct tty_ldisc *ld;
+
+ ld = tty_ldisc_try_get(i);
+ if (IS_ERR(ld))
return 0;
- seq_printf(m, "%-10s %2d\n", ld.ops->name ? ld.ops->name : "???", i);
- tty_ldisc_put(ld.ops);
+ seq_printf(m, "%-10s %2d\n", ld->ops->name ? ld->ops->name : "???", i);
+ tty_ldisc_put(ld);
return 0;
}
@@ -263,8 +271,7 @@
static void tty_ldisc_assign(struct tty_struct *tty, struct tty_ldisc *ld)
{
- ld->refcount = 0;
- tty->ldisc = *ld;
+ tty->ldisc = ld;
}
/**
@@ -286,7 +293,7 @@
int ret = 0;
spin_lock_irqsave(&tty_ldisc_lock, flags);
- ld = &tty->ldisc;
+ ld = tty->ldisc;
if (test_bit(TTY_LDISC, &tty->flags)) {
ld->refcount++;
ret = 1;
@@ -315,10 +322,9 @@
{
/* wait_event is a macro */
wait_event(tty_ldisc_wait, tty_ldisc_try(tty));
- WARN_ON(tty->ldisc.refcount == 0);
- return &tty->ldisc;
+ WARN_ON(tty->ldisc->refcount == 0);
+ return tty->ldisc;
}
-
EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait);
/**
@@ -335,10 +341,9 @@
struct tty_ldisc *tty_ldisc_ref(struct tty_struct *tty)
{
if (tty_ldisc_try(tty))
- return &tty->ldisc;
+ return tty->ldisc;
return NULL;
}
-
EXPORT_SYMBOL_GPL(tty_ldisc_ref);
/**
@@ -366,7 +371,6 @@
wake_up(&tty_ldisc_wait);
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
}
-
EXPORT_SYMBOL_GPL(tty_ldisc_deref);
/**
@@ -389,6 +393,26 @@
}
/**
+ * tty_ldisc_flush - flush line discipline queue
+ * @tty: tty
+ *
+ * Flush the line discipline queue (if any) for this tty. If there
+ * is no line discipline active this is a no-op.
+ */
+
+void tty_ldisc_flush(struct tty_struct *tty)
+{
+ struct tty_ldisc *ld = tty_ldisc_ref(tty);
+ if (ld) {
+ if (ld->ops->flush_buffer)
+ ld->ops->flush_buffer(tty);
+ tty_ldisc_deref(ld);
+ }
+ tty_buffer_flush(tty);
+}
+EXPORT_SYMBOL_GPL(tty_ldisc_flush);
+
+/**
* tty_set_termios_ldisc - set ldisc field
* @tty: tty structure
* @num: line discipline number
@@ -407,6 +431,39 @@
mutex_unlock(&tty->termios_mutex);
}
+/**
+ * tty_ldisc_open - open a line discipline
+ * @tty: tty we are opening the ldisc on
+ * @ld: discipline to open
+ *
+ * A helper opening method. Also a convenient debugging and check
+ * point.
+ */
+
+static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld)
+{
+ WARN_ON(test_and_set_bit(TTY_LDISC_OPEN, &tty->flags));
+ if (ld->ops->open)
+ return ld->ops->open(tty);
+ return 0;
+}
+
+/**
+ * tty_ldisc_close - close a line discipline
+ * @tty: tty we are opening the ldisc on
+ * @ld: discipline to close
+ *
+ * A helper close method. Also a convenient debugging and check
+ * point.
+ */
+
+static void tty_ldisc_close(struct tty_struct *tty, struct tty_ldisc *ld)
+{
+ WARN_ON(!test_bit(TTY_LDISC_OPEN, &tty->flags));
+ clear_bit(TTY_LDISC_OPEN, &tty->flags);
+ if (ld->ops->close)
+ ld->ops->close(tty);
+}
/**
* tty_ldisc_restore - helper for tty ldisc change
@@ -420,66 +477,136 @@
static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
{
char buf[64];
- struct tty_ldisc new_ldisc;
+ struct tty_ldisc *new_ldisc;
+ int r;
/* There is an outstanding reference here so this is safe */
- tty_ldisc_get(old->ops->num, old);
+ old = tty_ldisc_get(old->ops->num);
+ WARN_ON(IS_ERR(old));
tty_ldisc_assign(tty, old);
tty_set_termios_ldisc(tty, old->ops->num);
- if (old->ops->open && (old->ops->open(tty) < 0)) {
- tty_ldisc_put(old->ops);
+ if (tty_ldisc_open(tty, old) < 0) {
+ tty_ldisc_put(old);
/* This driver is always present */
- if (tty_ldisc_get(N_TTY, &new_ldisc) < 0)
+ new_ldisc = tty_ldisc_get(N_TTY);
+ if (IS_ERR(new_ldisc))
panic("n_tty: get");
- tty_ldisc_assign(tty, &new_ldisc);
+ tty_ldisc_assign(tty, new_ldisc);
tty_set_termios_ldisc(tty, N_TTY);
- if (new_ldisc.ops->open) {
- int r = new_ldisc.ops->open(tty);
- if (r < 0)
- panic("Couldn't open N_TTY ldisc for "
- "%s --- error %d.",
- tty_name(tty, buf), r);
- }
+ r = tty_ldisc_open(tty, new_ldisc);
+ if (r < 0)
+ panic("Couldn't open N_TTY ldisc for "
+ "%s --- error %d.",
+ tty_name(tty, buf), r);
}
}
/**
+ * tty_ldisc_halt - shut down the line discipline
+ * @tty: tty device
+ *
+ * Shut down the line discipline and work queue for this tty device.
+ * The TTY_LDISC flag being cleared ensures no further references can
+ * be obtained while the delayed work queue halt ensures that no more
+ * data is fed to the ldisc.
+ *
+ * In order to wait for any existing references to complete see
+ * tty_ldisc_wait_idle.
+ */
+
+static int tty_ldisc_halt(struct tty_struct *tty)
+{
+ clear_bit(TTY_LDISC, &tty->flags);
+ return cancel_delayed_work(&tty->buf.work);
+}
+
+/**
+ * tty_ldisc_wait_idle - wait for the ldisc to become idle
+ * @tty: tty to wait for
+ *
+ * Wait for the line discipline to become idle. The discipline must
+ * have been halted for this to guarantee it remains idle.
+ *
+ * tty_ldisc_lock protects the ref counts currently.
+ */
+
+static int tty_ldisc_wait_idle(struct tty_struct *tty)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&tty_ldisc_lock, flags);
+ while (tty->ldisc->refcount) {
+ spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+ if (wait_event_timeout(tty_ldisc_wait,
+ tty->ldisc->refcount == 0, 5 * HZ) == 0)
+ return -EBUSY;
+ spin_lock_irqsave(&tty_ldisc_lock, flags);
+ }
+ spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+ return 0;
+}
+
+/**
* tty_set_ldisc - set line discipline
* @tty: the terminal to set
* @ldisc: the line discipline
*
* Set the discipline of a tty line. Must be called from a process
- * context.
+ * context. The ldisc change logic has to protect itself against any
+ * overlapping ldisc change (including on the other end of pty pairs),
+ * the close of one side of a tty/pty pair, and eventually hangup.
*
- * Locking: takes tty_ldisc_lock.
- * called functions take termios_mutex
+ * Locking: takes tty_ldisc_lock, termios_mutex
*/
int tty_set_ldisc(struct tty_struct *tty, int ldisc)
{
int retval;
- struct tty_ldisc o_ldisc, new_ldisc;
- int work;
- unsigned long flags;
+ struct tty_ldisc *o_ldisc, *new_ldisc;
+ int work, o_work = 0;
struct tty_struct *o_tty;
-restart:
- /* This is a bit ugly for now but means we can break the 'ldisc
- is part of the tty struct' assumption later */
- retval = tty_ldisc_get(ldisc, &new_ldisc);
- if (retval)
- return retval;
+ new_ldisc = tty_ldisc_get(ldisc);
+ if (IS_ERR(new_ldisc))
+ return PTR_ERR(new_ldisc);
+
+ /*
+ * We need to look at the tty locking here for pty/tty pairs
+ * when both sides try to change in parallel.
+ */
+
+ o_tty = tty->link; /* o_tty is the pty side or NULL */
+
+
+ /*
+ * Check the no-op case
+ */
+
+ if (tty->ldisc->ops->num == ldisc) {
+ tty_ldisc_put(new_ldisc);
+ return 0;
+ }
/*
* Problem: What do we do if this blocks ?
+ * We could deadlock here
*/
tty_wait_until_sent(tty, 0);
- if (tty->ldisc.ops->num == ldisc) {
- tty_ldisc_put(new_ldisc.ops);
- return 0;
+ mutex_lock(&tty->ldisc_mutex);
+
+ /*
+ * We could be midstream of another ldisc change which has
+ * dropped the lock during processing. If so we need to wait.
+ */
+
+ while (test_bit(TTY_LDISC_CHANGING, &tty->flags)) {
+ mutex_unlock(&tty->ldisc_mutex);
+ wait_event(tty_ldisc_wait,
+ test_bit(TTY_LDISC_CHANGING, &tty->flags) == 0);
+ mutex_lock(&tty->ldisc_mutex);
}
+ set_bit(TTY_LDISC_CHANGING, &tty->flags);
/*
* No more input please, we are switching. The new ldisc
@@ -489,8 +616,6 @@
tty->receive_room = 0;
o_ldisc = tty->ldisc;
- o_tty = tty->link;
-
/*
* Make sure we don't change while someone holds a
* reference to the line discipline. The TTY_LDISC bit
@@ -501,108 +626,181 @@
* with a userspace app continually trying to use the tty in
* parallel to the change and re-referencing the tty.
*/
- clear_bit(TTY_LDISC, &tty->flags);
- if (o_tty)
- clear_bit(TTY_LDISC, &o_tty->flags);
- spin_lock_irqsave(&tty_ldisc_lock, flags);
- if (tty->ldisc.refcount || (o_tty && o_tty->ldisc.refcount)) {
- if (tty->ldisc.refcount) {
- /* Free the new ldisc we grabbed. Must drop the lock
- first. */
- spin_unlock_irqrestore(&tty_ldisc_lock, flags);
- tty_ldisc_put(o_ldisc.ops);
- /*
- * There are several reasons we may be busy, including
- * random momentary I/O traffic. We must therefore
- * retry. We could distinguish between blocking ops
- * and retries if we made tty_ldisc_wait() smarter.
- * That is up for discussion.
- */
- if (wait_event_interruptible(tty_ldisc_wait, tty->ldisc.refcount == 0) < 0)
- return -ERESTARTSYS;
- goto restart;
- }
- if (o_tty && o_tty->ldisc.refcount) {
- spin_unlock_irqrestore(&tty_ldisc_lock, flags);
- tty_ldisc_put(o_tty->ldisc.ops);
- if (wait_event_interruptible(tty_ldisc_wait, o_tty->ldisc.refcount == 0) < 0)
- return -ERESTARTSYS;
- goto restart;
- }
- }
- /*
- * If the TTY_LDISC bit is set, then we are racing against
- * another ldisc change
- */
- if (test_bit(TTY_LDISC_CHANGING, &tty->flags)) {
- struct tty_ldisc *ld;
- spin_unlock_irqrestore(&tty_ldisc_lock, flags);
- tty_ldisc_put(new_ldisc.ops);
- ld = tty_ldisc_ref_wait(tty);
- tty_ldisc_deref(ld);
- goto restart;
- }
- /*
- * This flag is used to avoid two parallel ldisc changes. Once
- * open and close are fine grained locked this may work better
- * as a mutex shared with the open/close/hup paths
- */
- set_bit(TTY_LDISC_CHANGING, &tty->flags);
+ work = tty_ldisc_halt(tty);
if (o_tty)
- set_bit(TTY_LDISC_CHANGING, &o_tty->flags);
- spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-
+ o_work = tty_ldisc_halt(o_tty);
+
/*
- * From this point on we know nobody has an ldisc
- * usage reference, nor can they obtain one until
- * we say so later on.
+ * Wait for ->hangup_work and ->buf.work handlers to terminate.
+ * We must drop the mutex here in case a hangup is also in process.
*/
- work = cancel_delayed_work(&tty->buf.work);
- /*
- * Wait for ->hangup_work and ->buf.work handlers to terminate
- * MUST NOT hold locks here.
- */
+ mutex_unlock(&tty->ldisc_mutex);
+
flush_scheduled_work();
+
+ /* Let any existing reference holders finish */
+ retval = tty_ldisc_wait_idle(tty);
+ if (retval < 0) {
+ clear_bit(TTY_LDISC_CHANGING, &tty->flags);
+ tty_ldisc_put(new_ldisc);
+ return retval;
+ }
+
+ mutex_lock(&tty->ldisc_mutex);
+ if (test_bit(TTY_HUPPED, &tty->flags)) {
+ /* We were raced by the hangup method. It will have stomped
+ the ldisc data and closed the ldisc down */
+ clear_bit(TTY_LDISC_CHANGING, &tty->flags);
+ mutex_unlock(&tty->ldisc_mutex);
+ tty_ldisc_put(new_ldisc);
+ return -EIO;
+ }
+
/* Shutdown the current discipline. */
- if (o_ldisc.ops->close)
- (o_ldisc.ops->close)(tty);
+ tty_ldisc_close(tty, o_ldisc);
/* Now set up the new line discipline. */
- tty_ldisc_assign(tty, &new_ldisc);
+ tty_ldisc_assign(tty, new_ldisc);
tty_set_termios_ldisc(tty, ldisc);
- if (new_ldisc.ops->open)
- retval = (new_ldisc.ops->open)(tty);
+
+ retval = tty_ldisc_open(tty, new_ldisc);
if (retval < 0) {
- tty_ldisc_put(new_ldisc.ops);
- tty_ldisc_restore(tty, &o_ldisc);
+ /* Back to the old one or N_TTY if we can't */
+ tty_ldisc_put(new_ldisc);
+ tty_ldisc_restore(tty, o_ldisc);
}
+
/* At this point we hold a reference to the new ldisc and a
a reference to the old ldisc. If we ended up flipping back
to the existing ldisc we have two references to it */
- if (tty->ldisc.ops->num != o_ldisc.ops->num && tty->ops->set_ldisc)
+ if (tty->ldisc->ops->num != o_ldisc->ops->num && tty->ops->set_ldisc)
tty->ops->set_ldisc(tty);
- tty_ldisc_put(o_ldisc.ops);
+ tty_ldisc_put(o_ldisc);
/*
- * Allow ldisc referencing to occur as soon as the driver
- * ldisc callback completes.
+ * Allow ldisc referencing to occur again
*/
tty_ldisc_enable(tty);
if (o_tty)
tty_ldisc_enable(o_tty);
- /* Restart it in case no characters kick it off. Safe if
+ /* Restart the work queue in case no characters kick it off. Safe if
already running */
if (work)
schedule_delayed_work(&tty->buf.work, 1);
+ if (o_work)
+ schedule_delayed_work(&o_tty->buf.work, 1);
+ mutex_unlock(&tty->ldisc_mutex);
return retval;
}
+/**
+ * tty_reset_termios - reset terminal state
+ * @tty: tty to reset
+ *
+ * Restore a terminal to the driver default state.
+ */
+
+static void tty_reset_termios(struct tty_struct *tty)
+{
+ mutex_lock(&tty->termios_mutex);
+ *tty->termios = tty->driver->init_termios;
+ tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios);
+ tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios);
+ mutex_unlock(&tty->termios_mutex);
+}
+
+
+/**
+ * tty_ldisc_reinit - reinitialise the tty ldisc
+ * @tty: tty to reinit
+ *
+ * Switch the tty back to N_TTY line discipline and leave the
+ * ldisc state closed
+ */
+
+static void tty_ldisc_reinit(struct tty_struct *tty)
+{
+ struct tty_ldisc *ld;
+
+ tty_ldisc_close(tty, tty->ldisc);
+ tty_ldisc_put(tty->ldisc);
+ tty->ldisc = NULL;
+ /*
+ * Switch the line discipline back
+ */
+ ld = tty_ldisc_get(N_TTY);
+ BUG_ON(IS_ERR(ld));
+ tty_ldisc_assign(tty, ld);
+ tty_set_termios_ldisc(tty, N_TTY);
+}
+
+/**
+ * tty_ldisc_hangup - hangup ldisc reset
+ * @tty: tty being hung up
+ *
+ * Some tty devices reset their termios when they receive a hangup
+ * event. In that situation we must also switch back to N_TTY properly
+ * before we reset the termios data.
+ *
+ * Locking: We can take the ldisc mutex as the rest of the code is
+ * careful to allow for this.
+ *
+ * In the pty pair case this occurs in the close() path of the
+ * tty itself so we must be careful about locking rules.
+ */
+
+void tty_ldisc_hangup(struct tty_struct *tty)
+{
+ struct tty_ldisc *ld;
+
+ /*
+ * FIXME! What are the locking issues here? This may me overdoing
+ * things... This question is especially important now that we've
+ * removed the irqlock.
+ */
+ ld = tty_ldisc_ref(tty);
+ if (ld != NULL) {
+ /* We may have no line discipline at this point */
+ if (ld->ops->flush_buffer)
+ ld->ops->flush_buffer(tty);
+ tty_driver_flush_buffer(tty);
+ if ((test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) &&
+ ld->ops->write_wakeup)
+ ld->ops->write_wakeup(tty);
+ if (ld->ops->hangup)
+ ld->ops->hangup(tty);
+ tty_ldisc_deref(ld);
+ }
+ /*
+ * FIXME: Once we trust the LDISC code better we can wait here for
+ * ldisc completion and fix the driver call race
+ */
+ wake_up_interruptible_poll(&tty->write_wait, POLLOUT);
+ wake_up_interruptible_poll(&tty->read_wait, POLLIN);
+ /*
+ * Shutdown the current line discipline, and reset it to
+ * N_TTY.
+ */
+ if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) {
+ /* Avoid racing set_ldisc */
+ mutex_lock(&tty->ldisc_mutex);
+ /* Switch back to N_TTY */
+ tty_ldisc_reinit(tty);
+ /* At this point we have a closed ldisc and we want to
+ reopen it. We could defer this to the next open but
+ it means auditing a lot of other paths so this is a FIXME */
+ WARN_ON(tty_ldisc_open(tty, tty->ldisc));
+ tty_ldisc_enable(tty);
+ mutex_unlock(&tty->ldisc_mutex);
+ tty_reset_termios(tty);
+ }
+}
/**
* tty_ldisc_setup - open line discipline
@@ -610,24 +808,23 @@
* @o_tty: pair tty for pty/tty pairs
*
* Called during the initial open of a tty/pty pair in order to set up the
- * line discplines and bind them to the tty.
+ * line disciplines and bind them to the tty. This has no locking issues
+ * as the device isn't yet active.
*/
int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty)
{
- struct tty_ldisc *ld = &tty->ldisc;
+ struct tty_ldisc *ld = tty->ldisc;
int retval;
- if (ld->ops->open) {
- retval = (ld->ops->open)(tty);
- if (retval)
- return retval;
- }
- if (o_tty && o_tty->ldisc.ops->open) {
- retval = (o_tty->ldisc.ops->open)(o_tty);
+ retval = tty_ldisc_open(tty, ld);
+ if (retval)
+ return retval;
+
+ if (o_tty) {
+ retval = tty_ldisc_open(o_tty, o_tty->ldisc);
if (retval) {
- if (ld->ops->close)
- (ld->ops->close)(tty);
+ tty_ldisc_close(tty, ld);
return retval;
}
tty_ldisc_enable(o_tty);
@@ -635,32 +832,25 @@
tty_ldisc_enable(tty);
return 0;
}
-
/**
* tty_ldisc_release - release line discipline
* @tty: tty being shut down
* @o_tty: pair tty for pty/tty pairs
*
- * Called during the final close of a tty/pty pair in order to shut down the
- * line discpline layer.
+ * Called during the final close of a tty/pty pair in order to shut down
+ * the line discpline layer. On exit the ldisc assigned is N_TTY and the
+ * ldisc has not been opened.
*/
void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty)
{
- unsigned long flags;
- struct tty_ldisc ld;
/*
* Prevent flush_to_ldisc() from rescheduling the work for later. Then
* kill any delayed work. As this is the final close it does not
* race with the set_ldisc code path.
*/
- clear_bit(TTY_LDISC, &tty->flags);
- cancel_delayed_work(&tty->buf.work);
- /*
- * Wait for ->hangup_work and ->buf.work handlers to terminate
- */
-
+ tty_ldisc_halt(tty);
flush_scheduled_work();
/*
@@ -668,38 +858,19 @@
* side waiters as the file is closing so user count on the file
* side is zero.
*/
- spin_lock_irqsave(&tty_ldisc_lock, flags);
- while (tty->ldisc.refcount) {
- spin_unlock_irqrestore(&tty_ldisc_lock, flags);
- wait_event(tty_ldisc_wait, tty->ldisc.refcount == 0);
- spin_lock_irqsave(&tty_ldisc_lock, flags);
- }
- spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+
+ tty_ldisc_wait_idle(tty);
+
/*
* Shutdown the current line discipline, and reset it to N_TTY.
*
* FIXME: this MUST get fixed for the new reflocking
*/
- if (tty->ldisc.ops->close)
- (tty->ldisc.ops->close)(tty);
- tty_ldisc_put(tty->ldisc.ops);
- /*
- * Switch the line discipline back
- */
- WARN_ON(tty_ldisc_get(N_TTY, &ld));
- tty_ldisc_assign(tty, &ld);
- tty_set_termios_ldisc(tty, N_TTY);
- if (o_tty) {
- /* FIXME: could o_tty be in setldisc here ? */
- clear_bit(TTY_LDISC, &o_tty->flags);
- if (o_tty->ldisc.ops->close)
- (o_tty->ldisc.ops->close)(o_tty);
- tty_ldisc_put(o_tty->ldisc.ops);
- WARN_ON(tty_ldisc_get(N_TTY, &ld));
- tty_ldisc_assign(o_tty, &ld);
- tty_set_termios_ldisc(o_tty, N_TTY);
- }
+ tty_ldisc_reinit(tty);
+ /* This will need doing differently if we need to lock */
+ if (o_tty)
+ tty_ldisc_release(o_tty, NULL);
}
/**
@@ -712,10 +883,10 @@
void tty_ldisc_init(struct tty_struct *tty)
{
- struct tty_ldisc ld;
- if (tty_ldisc_get(N_TTY, &ld) < 0)
+ struct tty_ldisc *ld = tty_ldisc_get(N_TTY);
+ if (IS_ERR(ld))
panic("n_tty: init_tty");
- tty_ldisc_assign(tty, &ld);
+ tty_ldisc_assign(tty, ld);
}
void tty_ldisc_begin(void)
diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c
index 9b8004c..62dadfc 100644
--- a/drivers/char/tty_port.c
+++ b/drivers/char/tty_port.c
@@ -137,7 +137,7 @@
EXPORT_SYMBOL(tty_port_carrier_raised);
/**
- * tty_port_raise_dtr_rts - Riase DTR/RTS
+ * tty_port_raise_dtr_rts - Raise DTR/RTS
* @port: tty port
*
* Wrapper for the DTR/RTS raise logic. For the moment this is used
@@ -147,12 +147,28 @@
void tty_port_raise_dtr_rts(struct tty_port *port)
{
- if (port->ops->raise_dtr_rts)
- port->ops->raise_dtr_rts(port);
+ if (port->ops->dtr_rts)
+ port->ops->dtr_rts(port, 1);
}
EXPORT_SYMBOL(tty_port_raise_dtr_rts);
/**
+ * tty_port_lower_dtr_rts - Lower DTR/RTS
+ * @port: tty port
+ *
+ * Wrapper for the DTR/RTS raise logic. For the moment this is used
+ * to hide some internal details. This will eventually become entirely
+ * internal to the tty port.
+ */
+
+void tty_port_lower_dtr_rts(struct tty_port *port)
+{
+ if (port->ops->dtr_rts)
+ port->ops->dtr_rts(port, 0);
+}
+EXPORT_SYMBOL(tty_port_lower_dtr_rts);
+
+/**
* tty_port_block_til_ready - Waiting logic for tty open
* @port: the tty port being opened
* @tty: the tty device being bound
@@ -167,7 +183,7 @@
* - port flags and counts
*
* The passed tty_port must implement the carrier_raised method if it can
- * do carrier detect and the raise_dtr_rts method if it supports software
+ * do carrier detect and the dtr_rts method if it supports software
* management of these lines. Note that the dtr/rts raise is done each
* iteration as a hangup may have previously dropped them while we wait.
*/
@@ -182,7 +198,8 @@
/* block if port is in the process of being closed */
if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
- interruptible_sleep_on(&port->close_wait);
+ wait_event_interruptible(port->close_wait,
+ !(port->flags & ASYNC_CLOSING));
if (port->flags & ASYNC_HUP_NOTIFY)
return -EAGAIN;
else
@@ -205,7 +222,6 @@
before the next open may complete */
retval = 0;
- add_wait_queue(&port->open_wait, &wait);
/* The port lock protects the port counts */
spin_lock_irqsave(&port->lock, flags);
@@ -219,7 +235,7 @@
if (tty->termios->c_cflag & CBAUD)
tty_port_raise_dtr_rts(port);
- set_current_state(TASK_INTERRUPTIBLE);
+ prepare_to_wait(&port->open_wait, &wait, TASK_INTERRUPTIBLE);
/* Check for a hangup or uninitialised port. Return accordingly */
if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) {
if (port->flags & ASYNC_HUP_NOTIFY)
@@ -240,8 +256,7 @@
}
schedule();
}
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&port->open_wait, &wait);
+ finish_wait(&port->open_wait, &wait);
/* Update counts. A parallel hangup will have set count to zero and
we must not mess that up further */
@@ -292,6 +307,17 @@
if (port->flags & ASYNC_INITIALIZED &&
port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
tty_wait_until_sent(tty, port->closing_wait);
+ if (port->drain_delay) {
+ unsigned int bps = tty_get_baud_rate(tty);
+ long timeout;
+
+ if (bps > 1200)
+ timeout = max_t(long, (HZ * 10 * port->drain_delay) / bps,
+ HZ / 10);
+ else
+ timeout = 2 * HZ;
+ schedule_timeout_interruptible(timeout);
+ }
return 1;
}
EXPORT_SYMBOL(tty_port_close_start);
@@ -302,6 +328,9 @@
tty_ldisc_flush(tty);
+ if (tty->termios->c_cflag & HUPCL)
+ tty_port_lower_dtr_rts(port);
+
spin_lock_irqsave(&port->lock, flags);
tty->closing = 0;
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index 4e63cc9..151bf5b 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -1,5 +1,5 @@
/* Low-level parallel-port routines for 8255-based PC-style hardware.
- *
+ *
* Authors: Phil Blundell <philb@gnu.org>
* Tim Waugh <tim@cyberelk.demon.co.uk>
* Jose Renau <renau@acm.org>
@@ -11,7 +11,7 @@
* Cleaned up include files - Russell King <linux@arm.uk.linux.org>
* DMA support - Bert De Jonghe <bert@sophis.be>
* Many ECP bugs fixed. Fred Barnes & Jamie Lokier, 1999
- * More PCI support now conditional on CONFIG_PCI, 03/2001, Paul G.
+ * More PCI support now conditional on CONFIG_PCI, 03/2001, Paul G.
* Various hacks, Fred Barnes, 04/2001
* Updated probing logic - Adam Belay <ambx1@neo.rr.com>
*/
@@ -56,10 +56,10 @@
#include <linux/pnp.h>
#include <linux/platform_device.h>
#include <linux/sysctl.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
-#include <asm/io.h>
#include <asm/dma.h>
-#include <asm/uaccess.h>
#include <linux/parport.h>
#include <linux/parport_pc.h>
@@ -82,7 +82,7 @@
#define ECR_TST 06
#define ECR_CNF 07
#define ECR_MODE_MASK 0xe0
-#define ECR_WRITE(p,v) frob_econtrol((p),0xff,(v))
+#define ECR_WRITE(p, v) frob_econtrol((p), 0xff, (v))
#undef DEBUG
@@ -109,27 +109,27 @@
static int pnp_registered_parport;
/* frob_control, but for ECR */
-static void frob_econtrol (struct parport *pb, unsigned char m,
+static void frob_econtrol(struct parport *pb, unsigned char m,
unsigned char v)
{
unsigned char ectr = 0;
if (m != 0xff)
- ectr = inb (ECONTROL (pb));
+ ectr = inb(ECONTROL(pb));
- DPRINTK (KERN_DEBUG "frob_econtrol(%02x,%02x): %02x -> %02x\n",
+ DPRINTK(KERN_DEBUG "frob_econtrol(%02x,%02x): %02x -> %02x\n",
m, v, ectr, (ectr & ~m) ^ v);
- outb ((ectr & ~m) ^ v, ECONTROL (pb));
+ outb((ectr & ~m) ^ v, ECONTROL(pb));
}
-static __inline__ void frob_set_mode (struct parport *p, int mode)
+static inline void frob_set_mode(struct parport *p, int mode)
{
- frob_econtrol (p, ECR_MODE_MASK, mode << 5);
+ frob_econtrol(p, ECR_MODE_MASK, mode << 5);
}
#ifdef CONFIG_PARPORT_PC_FIFO
-/* Safely change the mode bits in the ECR
+/* Safely change the mode bits in the ECR
Returns:
0 : Success
-EBUSY: Could not drain FIFO in some finite amount of time,
@@ -141,17 +141,18 @@
unsigned char oecr;
int mode;
- DPRINTK(KERN_INFO "parport change_mode ECP-ISA to mode 0x%02x\n",m);
+ DPRINTK(KERN_INFO "parport change_mode ECP-ISA to mode 0x%02x\n", m);
if (!priv->ecr) {
- printk (KERN_DEBUG "change_mode: but there's no ECR!\n");
+ printk(KERN_DEBUG "change_mode: but there's no ECR!\n");
return 0;
}
/* Bits <7:5> contain the mode. */
- oecr = inb (ECONTROL (p));
+ oecr = inb(ECONTROL(p));
mode = (oecr >> 5) & 0x7;
- if (mode == m) return 0;
+ if (mode == m)
+ return 0;
if (mode >= 2 && !(priv->ctr & 0x20)) {
/* This mode resets the FIFO, so we may
@@ -163,19 +164,21 @@
case ECR_ECP: /* ECP Parallel Port mode */
/* Busy wait for 200us */
for (counter = 0; counter < 40; counter++) {
- if (inb (ECONTROL (p)) & 0x01)
+ if (inb(ECONTROL(p)) & 0x01)
break;
- if (signal_pending (current)) break;
- udelay (5);
+ if (signal_pending(current))
+ break;
+ udelay(5);
}
/* Poll slowly. */
- while (!(inb (ECONTROL (p)) & 0x01)) {
- if (time_after_eq (jiffies, expire))
+ while (!(inb(ECONTROL(p)) & 0x01)) {
+ if (time_after_eq(jiffies, expire))
/* The FIFO is stuck. */
return -EBUSY;
- schedule_timeout_interruptible(msecs_to_jiffies(10));
- if (signal_pending (current))
+ schedule_timeout_interruptible(
+ msecs_to_jiffies(10));
+ if (signal_pending(current))
break;
}
}
@@ -185,20 +188,20 @@
/* We have to go through mode 001 */
oecr &= ~(7 << 5);
oecr |= ECR_PS2 << 5;
- ECR_WRITE (p, oecr);
+ ECR_WRITE(p, oecr);
}
/* Set the mode. */
oecr &= ~(7 << 5);
oecr |= m << 5;
- ECR_WRITE (p, oecr);
+ ECR_WRITE(p, oecr);
return 0;
}
#ifdef CONFIG_PARPORT_1284
/* Find FIFO lossage; FIFO is reset */
#if 0
-static int get_fifo_residue (struct parport *p)
+static int get_fifo_residue(struct parport *p)
{
int residue;
int cnfga;
@@ -206,26 +209,26 @@
/* Adjust for the contents of the FIFO. */
for (residue = priv->fifo_depth; ; residue--) {
- if (inb (ECONTROL (p)) & 0x2)
+ if (inb(ECONTROL(p)) & 0x2)
/* Full up. */
break;
- outb (0, FIFO (p));
+ outb(0, FIFO(p));
}
- printk (KERN_DEBUG "%s: %d PWords were left in FIFO\n", p->name,
+ printk(KERN_DEBUG "%s: %d PWords were left in FIFO\n", p->name,
residue);
/* Reset the FIFO. */
- frob_set_mode (p, ECR_PS2);
+ frob_set_mode(p, ECR_PS2);
/* Now change to config mode and clean up. FIXME */
- frob_set_mode (p, ECR_CNF);
- cnfga = inb (CONFIGA (p));
- printk (KERN_DEBUG "%s: cnfgA contains 0x%02x\n", p->name, cnfga);
+ frob_set_mode(p, ECR_CNF);
+ cnfga = inb(CONFIGA(p));
+ printk(KERN_DEBUG "%s: cnfgA contains 0x%02x\n", p->name, cnfga);
if (!(cnfga & (1<<2))) {
- printk (KERN_DEBUG "%s: Accounting for extra byte\n", p->name);
+ printk(KERN_DEBUG "%s: Accounting for extra byte\n", p->name);
residue++;
}
@@ -233,9 +236,11 @@
* PWord != 1 byte. */
/* Back to PS2 mode. */
- frob_set_mode (p, ECR_PS2);
+ frob_set_mode(p, ECR_PS2);
- DPRINTK (KERN_DEBUG "*** get_fifo_residue: done residue collecting (ecr = 0x%2.2x)\n", inb (ECONTROL (p)));
+ DPRINTK(KERN_DEBUG
+ "*** get_fifo_residue: done residue collecting (ecr = 0x%2.2x)\n",
+ inb(ECONTROL(p)));
return residue;
}
#endif /* 0 */
@@ -257,8 +262,8 @@
/* To clear timeout some chips require double read */
parport_pc_read_status(pb);
r = parport_pc_read_status(pb);
- outb (r | 0x01, STATUS (pb)); /* Some reset by writing 1 */
- outb (r & 0xfe, STATUS (pb)); /* Others by writing 0 */
+ outb(r | 0x01, STATUS(pb)); /* Some reset by writing 1 */
+ outb(r & 0xfe, STATUS(pb)); /* Others by writing 0 */
r = parport_pc_read_status(pb);
return !(r & 0x01);
@@ -272,7 +277,8 @@
* of these are in parport_pc.h.
*/
-static void parport_pc_init_state(struct pardevice *dev, struct parport_state *s)
+static void parport_pc_init_state(struct pardevice *dev,
+ struct parport_state *s)
{
s->u.pc.ctr = 0xc;
if (dev->irq_func &&
@@ -289,22 +295,23 @@
const struct parport_pc_private *priv = p->physport->private_data;
s->u.pc.ctr = priv->ctr;
if (priv->ecr)
- s->u.pc.ecr = inb (ECONTROL (p));
+ s->u.pc.ecr = inb(ECONTROL(p));
}
-static void parport_pc_restore_state(struct parport *p, struct parport_state *s)
+static void parport_pc_restore_state(struct parport *p,
+ struct parport_state *s)
{
struct parport_pc_private *priv = p->physport->private_data;
register unsigned char c = s->u.pc.ctr & priv->ctr_writable;
- outb (c, CONTROL (p));
+ outb(c, CONTROL(p));
priv->ctr = c;
if (priv->ecr)
- ECR_WRITE (p, s->u.pc.ecr);
+ ECR_WRITE(p, s->u.pc.ecr);
}
#ifdef CONFIG_PARPORT_1284
-static size_t parport_pc_epp_read_data (struct parport *port, void *buf,
- size_t length, int flags)
+static size_t parport_pc_epp_read_data(struct parport *port, void *buf,
+ size_t length, int flags)
{
size_t got = 0;
@@ -316,54 +323,52 @@
* nFault is 0 if there is at least 1 byte in the Warp's FIFO
* pError is 1 if there are 16 bytes in the Warp's FIFO
*/
- status = inb (STATUS (port));
+ status = inb(STATUS(port));
- while (!(status & 0x08) && (got < length)) {
- if ((left >= 16) && (status & 0x20) && !(status & 0x08)) {
+ while (!(status & 0x08) && got < length) {
+ if (left >= 16 && (status & 0x20) && !(status & 0x08)) {
/* can grab 16 bytes from warp fifo */
- if (!((long)buf & 0x03)) {
- insl (EPPDATA (port), buf, 4);
- } else {
- insb (EPPDATA (port), buf, 16);
- }
+ if (!((long)buf & 0x03))
+ insl(EPPDATA(port), buf, 4);
+ else
+ insb(EPPDATA(port), buf, 16);
buf += 16;
got += 16;
left -= 16;
} else {
/* grab single byte from the warp fifo */
- *((char *)buf) = inb (EPPDATA (port));
+ *((char *)buf) = inb(EPPDATA(port));
buf++;
got++;
left--;
}
- status = inb (STATUS (port));
+ status = inb(STATUS(port));
if (status & 0x01) {
/* EPP timeout should never occur... */
- printk (KERN_DEBUG "%s: EPP timeout occurred while talking to "
- "w91284pic (should not have done)\n", port->name);
- clear_epp_timeout (port);
+ printk(KERN_DEBUG
+"%s: EPP timeout occurred while talking to w91284pic (should not have done)\n", port->name);
+ clear_epp_timeout(port);
}
}
return got;
}
if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
- if (!(((long)buf | length) & 0x03)) {
- insl (EPPDATA (port), buf, (length >> 2));
- } else {
- insb (EPPDATA (port), buf, length);
- }
- if (inb (STATUS (port)) & 0x01) {
- clear_epp_timeout (port);
+ if (!(((long)buf | length) & 0x03))
+ insl(EPPDATA(port), buf, (length >> 2));
+ else
+ insb(EPPDATA(port), buf, length);
+ if (inb(STATUS(port)) & 0x01) {
+ clear_epp_timeout(port);
return -EIO;
}
return length;
}
for (; got < length; got++) {
- *((char*)buf) = inb (EPPDATA(port));
+ *((char *)buf) = inb(EPPDATA(port));
buf++;
- if (inb (STATUS (port)) & 0x01) {
+ if (inb(STATUS(port)) & 0x01) {
/* EPP timeout */
- clear_epp_timeout (port);
+ clear_epp_timeout(port);
break;
}
}
@@ -371,28 +376,27 @@
return got;
}
-static size_t parport_pc_epp_write_data (struct parport *port, const void *buf,
- size_t length, int flags)
+static size_t parport_pc_epp_write_data(struct parport *port, const void *buf,
+ size_t length, int flags)
{
size_t written = 0;
if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
- if (!(((long)buf | length) & 0x03)) {
- outsl (EPPDATA (port), buf, (length >> 2));
- } else {
- outsb (EPPDATA (port), buf, length);
- }
- if (inb (STATUS (port)) & 0x01) {
- clear_epp_timeout (port);
+ if (!(((long)buf | length) & 0x03))
+ outsl(EPPDATA(port), buf, (length >> 2));
+ else
+ outsb(EPPDATA(port), buf, length);
+ if (inb(STATUS(port)) & 0x01) {
+ clear_epp_timeout(port);
return -EIO;
}
return length;
}
for (; written < length; written++) {
- outb (*((char*)buf), EPPDATA(port));
+ outb(*((char *)buf), EPPDATA(port));
buf++;
- if (inb (STATUS(port)) & 0x01) {
- clear_epp_timeout (port);
+ if (inb(STATUS(port)) & 0x01) {
+ clear_epp_timeout(port);
break;
}
}
@@ -400,24 +404,24 @@
return written;
}
-static size_t parport_pc_epp_read_addr (struct parport *port, void *buf,
+static size_t parport_pc_epp_read_addr(struct parport *port, void *buf,
size_t length, int flags)
{
size_t got = 0;
if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
- insb (EPPADDR (port), buf, length);
- if (inb (STATUS (port)) & 0x01) {
- clear_epp_timeout (port);
+ insb(EPPADDR(port), buf, length);
+ if (inb(STATUS(port)) & 0x01) {
+ clear_epp_timeout(port);
return -EIO;
}
return length;
}
for (; got < length; got++) {
- *((char*)buf) = inb (EPPADDR (port));
+ *((char *)buf) = inb(EPPADDR(port));
buf++;
- if (inb (STATUS (port)) & 0x01) {
- clear_epp_timeout (port);
+ if (inb(STATUS(port)) & 0x01) {
+ clear_epp_timeout(port);
break;
}
}
@@ -425,25 +429,25 @@
return got;
}
-static size_t parport_pc_epp_write_addr (struct parport *port,
+static size_t parport_pc_epp_write_addr(struct parport *port,
const void *buf, size_t length,
int flags)
{
size_t written = 0;
if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
- outsb (EPPADDR (port), buf, length);
- if (inb (STATUS (port)) & 0x01) {
- clear_epp_timeout (port);
+ outsb(EPPADDR(port), buf, length);
+ if (inb(STATUS(port)) & 0x01) {
+ clear_epp_timeout(port);
return -EIO;
}
return length;
}
for (; written < length; written++) {
- outb (*((char*)buf), EPPADDR (port));
+ outb(*((char *)buf), EPPADDR(port));
buf++;
- if (inb (STATUS (port)) & 0x01) {
- clear_epp_timeout (port);
+ if (inb(STATUS(port)) & 0x01) {
+ clear_epp_timeout(port);
break;
}
}
@@ -451,74 +455,74 @@
return written;
}
-static size_t parport_pc_ecpepp_read_data (struct parport *port, void *buf,
- size_t length, int flags)
+static size_t parport_pc_ecpepp_read_data(struct parport *port, void *buf,
+ size_t length, int flags)
{
size_t got;
- frob_set_mode (port, ECR_EPP);
- parport_pc_data_reverse (port);
- parport_pc_write_control (port, 0x4);
- got = parport_pc_epp_read_data (port, buf, length, flags);
- frob_set_mode (port, ECR_PS2);
+ frob_set_mode(port, ECR_EPP);
+ parport_pc_data_reverse(port);
+ parport_pc_write_control(port, 0x4);
+ got = parport_pc_epp_read_data(port, buf, length, flags);
+ frob_set_mode(port, ECR_PS2);
return got;
}
-static size_t parport_pc_ecpepp_write_data (struct parport *port,
- const void *buf, size_t length,
- int flags)
+static size_t parport_pc_ecpepp_write_data(struct parport *port,
+ const void *buf, size_t length,
+ int flags)
{
size_t written;
- frob_set_mode (port, ECR_EPP);
- parport_pc_write_control (port, 0x4);
- parport_pc_data_forward (port);
- written = parport_pc_epp_write_data (port, buf, length, flags);
- frob_set_mode (port, ECR_PS2);
+ frob_set_mode(port, ECR_EPP);
+ parport_pc_write_control(port, 0x4);
+ parport_pc_data_forward(port);
+ written = parport_pc_epp_write_data(port, buf, length, flags);
+ frob_set_mode(port, ECR_PS2);
return written;
}
-static size_t parport_pc_ecpepp_read_addr (struct parport *port, void *buf,
- size_t length, int flags)
+static size_t parport_pc_ecpepp_read_addr(struct parport *port, void *buf,
+ size_t length, int flags)
{
size_t got;
- frob_set_mode (port, ECR_EPP);
- parport_pc_data_reverse (port);
- parport_pc_write_control (port, 0x4);
- got = parport_pc_epp_read_addr (port, buf, length, flags);
- frob_set_mode (port, ECR_PS2);
+ frob_set_mode(port, ECR_EPP);
+ parport_pc_data_reverse(port);
+ parport_pc_write_control(port, 0x4);
+ got = parport_pc_epp_read_addr(port, buf, length, flags);
+ frob_set_mode(port, ECR_PS2);
return got;
}
-static size_t parport_pc_ecpepp_write_addr (struct parport *port,
+static size_t parport_pc_ecpepp_write_addr(struct parport *port,
const void *buf, size_t length,
int flags)
{
size_t written;
- frob_set_mode (port, ECR_EPP);
- parport_pc_write_control (port, 0x4);
- parport_pc_data_forward (port);
- written = parport_pc_epp_write_addr (port, buf, length, flags);
- frob_set_mode (port, ECR_PS2);
+ frob_set_mode(port, ECR_EPP);
+ parport_pc_write_control(port, 0x4);
+ parport_pc_data_forward(port);
+ written = parport_pc_epp_write_addr(port, buf, length, flags);
+ frob_set_mode(port, ECR_PS2);
return written;
}
#endif /* IEEE 1284 support */
#ifdef CONFIG_PARPORT_PC_FIFO
-static size_t parport_pc_fifo_write_block_pio (struct parport *port,
+static size_t parport_pc_fifo_write_block_pio(struct parport *port,
const void *buf, size_t length)
{
int ret = 0;
const unsigned char *bufp = buf;
size_t left = length;
unsigned long expire = jiffies + port->physport->cad->timeout;
- const int fifo = FIFO (port);
+ const int fifo = FIFO(port);
int poll_for = 8; /* 80 usecs */
const struct parport_pc_private *priv = port->physport->private_data;
const int fifo_depth = priv->fifo_depth;
@@ -526,25 +530,25 @@
port = port->physport;
/* We don't want to be interrupted every character. */
- parport_pc_disable_irq (port);
+ parport_pc_disable_irq(port);
/* set nErrIntrEn and serviceIntr */
- frob_econtrol (port, (1<<4) | (1<<2), (1<<4) | (1<<2));
+ frob_econtrol(port, (1<<4) | (1<<2), (1<<4) | (1<<2));
/* Forward mode. */
- parport_pc_data_forward (port); /* Must be in PS2 mode */
+ parport_pc_data_forward(port); /* Must be in PS2 mode */
while (left) {
unsigned char byte;
- unsigned char ecrval = inb (ECONTROL (port));
+ unsigned char ecrval = inb(ECONTROL(port));
int i = 0;
- if (need_resched() && time_before (jiffies, expire))
+ if (need_resched() && time_before(jiffies, expire))
/* Can't yield the port. */
- schedule ();
+ schedule();
/* Anyone else waiting for the port? */
if (port->waithead) {
- printk (KERN_DEBUG "Somebody wants the port\n");
+ printk(KERN_DEBUG "Somebody wants the port\n");
break;
}
@@ -552,21 +556,22 @@
/* FIFO is full. Wait for interrupt. */
/* Clear serviceIntr */
- ECR_WRITE (port, ecrval & ~(1<<2));
- false_alarm:
- ret = parport_wait_event (port, HZ);
- if (ret < 0) break;
+ ECR_WRITE(port, ecrval & ~(1<<2));
+false_alarm:
+ ret = parport_wait_event(port, HZ);
+ if (ret < 0)
+ break;
ret = 0;
- if (!time_before (jiffies, expire)) {
+ if (!time_before(jiffies, expire)) {
/* Timed out. */
- printk (KERN_DEBUG "FIFO write timed out\n");
+ printk(KERN_DEBUG "FIFO write timed out\n");
break;
}
- ecrval = inb (ECONTROL (port));
+ ecrval = inb(ECONTROL(port));
if (!(ecrval & (1<<2))) {
if (need_resched() &&
- time_before (jiffies, expire))
- schedule ();
+ time_before(jiffies, expire))
+ schedule();
goto false_alarm;
}
@@ -577,38 +582,38 @@
/* Can't fail now. */
expire = jiffies + port->cad->timeout;
- poll:
- if (signal_pending (current))
+poll:
+ if (signal_pending(current))
break;
if (ecrval & 0x01) {
/* FIFO is empty. Blast it full. */
const int n = left < fifo_depth ? left : fifo_depth;
- outsb (fifo, bufp, n);
+ outsb(fifo, bufp, n);
bufp += n;
left -= n;
/* Adjust the poll time. */
- if (i < (poll_for - 2)) poll_for--;
+ if (i < (poll_for - 2))
+ poll_for--;
continue;
} else if (i++ < poll_for) {
- udelay (10);
- ecrval = inb (ECONTROL (port));
+ udelay(10);
+ ecrval = inb(ECONTROL(port));
goto poll;
}
- /* Half-full (call me an optimist) */
+ /* Half-full(call me an optimist) */
byte = *bufp++;
- outb (byte, fifo);
+ outb(byte, fifo);
left--;
- }
-
-dump_parport_state ("leave fifo_write_block_pio", port);
+ }
+ dump_parport_state("leave fifo_write_block_pio", port);
return length - left;
}
#ifdef HAS_DMA
-static size_t parport_pc_fifo_write_block_dma (struct parport *port,
+static size_t parport_pc_fifo_write_block_dma(struct parport *port,
const void *buf, size_t length)
{
int ret = 0;
@@ -621,7 +626,7 @@
unsigned long start = (unsigned long) buf;
unsigned long end = (unsigned long) buf + length - 1;
-dump_parport_state ("enter fifo_write_block_dma", port);
+ dump_parport_state("enter fifo_write_block_dma", port);
if (end < MAX_DMA_ADDRESS) {
/* If it would cross a 64k boundary, cap it at the end. */
if ((start ^ end) & ~0xffffUL)
@@ -629,8 +634,9 @@
dma_addr = dma_handle = dma_map_single(dev, (void *)buf, length,
DMA_TO_DEVICE);
- } else {
- /* above 16 MB we use a bounce buffer as ISA-DMA is not possible */
+ } else {
+ /* above 16 MB we use a bounce buffer as ISA-DMA
+ is not possible */
maxlen = PAGE_SIZE; /* sizeof(priv->dma_buf) */
dma_addr = priv->dma_handle;
dma_handle = 0;
@@ -639,12 +645,12 @@
port = port->physport;
/* We don't want to be interrupted every character. */
- parport_pc_disable_irq (port);
+ parport_pc_disable_irq(port);
/* set nErrIntrEn and serviceIntr */
- frob_econtrol (port, (1<<4) | (1<<2), (1<<4) | (1<<2));
+ frob_econtrol(port, (1<<4) | (1<<2), (1<<4) | (1<<2));
/* Forward mode. */
- parport_pc_data_forward (port); /* Must be in PS2 mode */
+ parport_pc_data_forward(port); /* Must be in PS2 mode */
while (left) {
unsigned long expire = jiffies + port->physport->cad->timeout;
@@ -665,10 +671,10 @@
set_dma_count(port->dma, count);
/* Set DMA mode */
- frob_econtrol (port, 1<<3, 1<<3);
+ frob_econtrol(port, 1<<3, 1<<3);
/* Clear serviceIntr */
- frob_econtrol (port, 1<<2, 0);
+ frob_econtrol(port, 1<<2, 0);
enable_dma(port->dma);
release_dma_lock(dmaflag);
@@ -676,20 +682,22 @@
/* assume DMA will be successful */
left -= count;
buf += count;
- if (dma_handle) dma_addr += count;
+ if (dma_handle)
+ dma_addr += count;
/* Wait for interrupt. */
- false_alarm:
- ret = parport_wait_event (port, HZ);
- if (ret < 0) break;
+false_alarm:
+ ret = parport_wait_event(port, HZ);
+ if (ret < 0)
+ break;
ret = 0;
- if (!time_before (jiffies, expire)) {
+ if (!time_before(jiffies, expire)) {
/* Timed out. */
- printk (KERN_DEBUG "DMA write timed out\n");
+ printk(KERN_DEBUG "DMA write timed out\n");
break;
}
/* Is serviceIntr set? */
- if (!(inb (ECONTROL (port)) & (1<<2))) {
+ if (!(inb(ECONTROL(port)) & (1<<2))) {
cond_resched();
goto false_alarm;
@@ -705,14 +713,15 @@
/* Anyone else waiting for the port? */
if (port->waithead) {
- printk (KERN_DEBUG "Somebody wants the port\n");
+ printk(KERN_DEBUG "Somebody wants the port\n");
break;
}
/* update for possible DMA residue ! */
buf -= count;
left += count;
- if (dma_handle) dma_addr -= count;
+ if (dma_handle)
+ dma_addr -= count;
}
/* Maybe got here through break, so adjust for DMA residue! */
@@ -723,12 +732,12 @@
release_dma_lock(dmaflag);
/* Turn off DMA mode */
- frob_econtrol (port, 1<<3, 0);
+ frob_econtrol(port, 1<<3, 0);
if (dma_handle)
dma_unmap_single(dev, dma_handle, length, DMA_TO_DEVICE);
-dump_parport_state ("leave fifo_write_block_dma", port);
+ dump_parport_state("leave fifo_write_block_dma", port);
return length - left;
}
#endif
@@ -738,13 +747,13 @@
{
#ifdef HAS_DMA
if (port->dma != PARPORT_DMA_NONE)
- return parport_pc_fifo_write_block_dma (port, buf, length);
+ return parport_pc_fifo_write_block_dma(port, buf, length);
#endif
- return parport_pc_fifo_write_block_pio (port, buf, length);
+ return parport_pc_fifo_write_block_pio(port, buf, length);
}
/* Parallel Port FIFO mode (ECP chipsets) */
-static size_t parport_pc_compat_write_block_pio (struct parport *port,
+static size_t parport_pc_compat_write_block_pio(struct parport *port,
const void *buf, size_t length,
int flags)
{
@@ -756,14 +765,16 @@
/* Special case: a timeout of zero means we cannot call schedule().
* Also if O_NONBLOCK is set then use the default implementation. */
if (port->physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
- return parport_ieee1284_write_compat (port, buf,
+ return parport_ieee1284_write_compat(port, buf,
length, flags);
/* Set up parallel port FIFO mode.*/
- parport_pc_data_forward (port); /* Must be in PS2 mode */
- parport_pc_frob_control (port, PARPORT_CONTROL_STROBE, 0);
- r = change_mode (port, ECR_PPF); /* Parallel port FIFO */
- if (r) printk (KERN_DEBUG "%s: Warning change_mode ECR_PPF failed\n", port->name);
+ parport_pc_data_forward(port); /* Must be in PS2 mode */
+ parport_pc_frob_control(port, PARPORT_CONTROL_STROBE, 0);
+ r = change_mode(port, ECR_PPF); /* Parallel port FIFO */
+ if (r)
+ printk(KERN_DEBUG "%s: Warning change_mode ECR_PPF failed\n",
+ port->name);
port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;
@@ -775,40 +786,39 @@
* the FIFO is empty, so allow 4 seconds for each position
* in the fifo.
*/
- expire = jiffies + (priv->fifo_depth * HZ * 4);
+ expire = jiffies + (priv->fifo_depth * HZ * 4);
do {
/* Wait for the FIFO to empty */
- r = change_mode (port, ECR_PS2);
- if (r != -EBUSY) {
+ r = change_mode(port, ECR_PS2);
+ if (r != -EBUSY)
break;
- }
- } while (time_before (jiffies, expire));
+ } while (time_before(jiffies, expire));
if (r == -EBUSY) {
- printk (KERN_DEBUG "%s: FIFO is stuck\n", port->name);
+ printk(KERN_DEBUG "%s: FIFO is stuck\n", port->name);
/* Prevent further data transfer. */
- frob_set_mode (port, ECR_TST);
+ frob_set_mode(port, ECR_TST);
/* Adjust for the contents of the FIFO. */
for (written -= priv->fifo_depth; ; written++) {
- if (inb (ECONTROL (port)) & 0x2) {
+ if (inb(ECONTROL(port)) & 0x2) {
/* Full up. */
break;
}
- outb (0, FIFO (port));
+ outb(0, FIFO(port));
}
/* Reset the FIFO and return to PS2 mode. */
- frob_set_mode (port, ECR_PS2);
+ frob_set_mode(port, ECR_PS2);
}
- r = parport_wait_peripheral (port,
+ r = parport_wait_peripheral(port,
PARPORT_STATUS_BUSY,
PARPORT_STATUS_BUSY);
if (r)
- printk (KERN_DEBUG
- "%s: BUSY timeout (%d) in compat_write_block_pio\n",
+ printk(KERN_DEBUG
+ "%s: BUSY timeout (%d) in compat_write_block_pio\n",
port->name, r);
port->physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
@@ -818,7 +828,7 @@
/* ECP */
#ifdef CONFIG_PARPORT_1284
-static size_t parport_pc_ecp_write_block_pio (struct parport *port,
+static size_t parport_pc_ecp_write_block_pio(struct parport *port,
const void *buf, size_t length,
int flags)
{
@@ -830,36 +840,38 @@
/* Special case: a timeout of zero means we cannot call schedule().
* Also if O_NONBLOCK is set then use the default implementation. */
if (port->physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
- return parport_ieee1284_ecp_write_data (port, buf,
+ return parport_ieee1284_ecp_write_data(port, buf,
length, flags);
/* Switch to forward mode if necessary. */
if (port->physport->ieee1284.phase != IEEE1284_PH_FWD_IDLE) {
/* Event 47: Set nInit high. */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_INIT
| PARPORT_CONTROL_AUTOFD,
PARPORT_CONTROL_INIT
| PARPORT_CONTROL_AUTOFD);
/* Event 49: PError goes high. */
- r = parport_wait_peripheral (port,
+ r = parport_wait_peripheral(port,
PARPORT_STATUS_PAPEROUT,
PARPORT_STATUS_PAPEROUT);
if (r) {
- printk (KERN_DEBUG "%s: PError timeout (%d) "
+ printk(KERN_DEBUG "%s: PError timeout (%d) "
"in ecp_write_block_pio\n", port->name, r);
}
}
/* Set up ECP parallel port mode.*/
- parport_pc_data_forward (port); /* Must be in PS2 mode */
- parport_pc_frob_control (port,
+ parport_pc_data_forward(port); /* Must be in PS2 mode */
+ parport_pc_frob_control(port,
PARPORT_CONTROL_STROBE |
PARPORT_CONTROL_AUTOFD,
0);
- r = change_mode (port, ECR_ECP); /* ECP FIFO */
- if (r) printk (KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n", port->name);
+ r = change_mode(port, ECR_ECP); /* ECP FIFO */
+ if (r)
+ printk(KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n",
+ port->name);
port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;
/* Write the data to the FIFO. */
@@ -873,55 +885,54 @@
expire = jiffies + (priv->fifo_depth * (HZ * 4));
do {
/* Wait for the FIFO to empty */
- r = change_mode (port, ECR_PS2);
- if (r != -EBUSY) {
+ r = change_mode(port, ECR_PS2);
+ if (r != -EBUSY)
break;
- }
- } while (time_before (jiffies, expire));
+ } while (time_before(jiffies, expire));
if (r == -EBUSY) {
- printk (KERN_DEBUG "%s: FIFO is stuck\n", port->name);
+ printk(KERN_DEBUG "%s: FIFO is stuck\n", port->name);
/* Prevent further data transfer. */
- frob_set_mode (port, ECR_TST);
+ frob_set_mode(port, ECR_TST);
/* Adjust for the contents of the FIFO. */
for (written -= priv->fifo_depth; ; written++) {
- if (inb (ECONTROL (port)) & 0x2) {
+ if (inb(ECONTROL(port)) & 0x2) {
/* Full up. */
break;
}
- outb (0, FIFO (port));
+ outb(0, FIFO(port));
}
/* Reset the FIFO and return to PS2 mode. */
- frob_set_mode (port, ECR_PS2);
+ frob_set_mode(port, ECR_PS2);
/* Host transfer recovery. */
- parport_pc_data_reverse (port); /* Must be in PS2 mode */
- udelay (5);
- parport_frob_control (port, PARPORT_CONTROL_INIT, 0);
- r = parport_wait_peripheral (port, PARPORT_STATUS_PAPEROUT, 0);
+ parport_pc_data_reverse(port); /* Must be in PS2 mode */
+ udelay(5);
+ parport_frob_control(port, PARPORT_CONTROL_INIT, 0);
+ r = parport_wait_peripheral(port, PARPORT_STATUS_PAPEROUT, 0);
if (r)
- printk (KERN_DEBUG "%s: PE,1 timeout (%d) "
+ printk(KERN_DEBUG "%s: PE,1 timeout (%d) "
"in ecp_write_block_pio\n", port->name, r);
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_INIT,
PARPORT_CONTROL_INIT);
- r = parport_wait_peripheral (port,
+ r = parport_wait_peripheral(port,
PARPORT_STATUS_PAPEROUT,
PARPORT_STATUS_PAPEROUT);
- if (r)
- printk (KERN_DEBUG "%s: PE,2 timeout (%d) "
+ if (r)
+ printk(KERN_DEBUG "%s: PE,2 timeout (%d) "
"in ecp_write_block_pio\n", port->name, r);
}
- r = parport_wait_peripheral (port,
- PARPORT_STATUS_BUSY,
+ r = parport_wait_peripheral(port,
+ PARPORT_STATUS_BUSY,
PARPORT_STATUS_BUSY);
- if(r)
- printk (KERN_DEBUG
+ if (r)
+ printk(KERN_DEBUG
"%s: BUSY timeout (%d) in ecp_write_block_pio\n",
port->name, r);
@@ -931,7 +942,7 @@
}
#if 0
-static size_t parport_pc_ecp_read_block_pio (struct parport *port,
+static size_t parport_pc_ecp_read_block_pio(struct parport *port,
void *buf, size_t length,
int flags)
{
@@ -944,13 +955,13 @@
char *bufp = buf;
port = port->physport;
-DPRINTK (KERN_DEBUG "parport_pc: parport_pc_ecp_read_block_pio\n");
-dump_parport_state ("enter fcn", port);
+ DPRINTK(KERN_DEBUG "parport_pc: parport_pc_ecp_read_block_pio\n");
+ dump_parport_state("enter fcn", port);
/* Special case: a timeout of zero means we cannot call schedule().
* Also if O_NONBLOCK is set then use the default implementation. */
if (port->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
- return parport_ieee1284_ecp_read_data (port, buf,
+ return parport_ieee1284_ecp_read_data(port, buf,
length, flags);
if (port->ieee1284.mode == IEEE1284_MODE_ECPRLE) {
@@ -966,173 +977,178 @@
* go through software emulation. Otherwise we may have to throw
* away data. */
if (length < fifofull)
- return parport_ieee1284_ecp_read_data (port, buf,
+ return parport_ieee1284_ecp_read_data(port, buf,
length, flags);
if (port->ieee1284.phase != IEEE1284_PH_REV_IDLE) {
/* change to reverse-idle phase (must be in forward-idle) */
/* Event 38: Set nAutoFd low (also make sure nStrobe is high) */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_AUTOFD
| PARPORT_CONTROL_STROBE,
PARPORT_CONTROL_AUTOFD);
- parport_pc_data_reverse (port); /* Must be in PS2 mode */
- udelay (5);
+ parport_pc_data_reverse(port); /* Must be in PS2 mode */
+ udelay(5);
/* Event 39: Set nInit low to initiate bus reversal */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_INIT,
0);
/* Event 40: Wait for nAckReverse (PError) to go low */
- r = parport_wait_peripheral (port, PARPORT_STATUS_PAPEROUT, 0);
- if (r) {
- printk (KERN_DEBUG "%s: PE timeout Event 40 (%d) "
+ r = parport_wait_peripheral(port, PARPORT_STATUS_PAPEROUT, 0);
+ if (r) {
+ printk(KERN_DEBUG "%s: PE timeout Event 40 (%d) "
"in ecp_read_block_pio\n", port->name, r);
return 0;
}
}
/* Set up ECP FIFO mode.*/
-/* parport_pc_frob_control (port,
+/* parport_pc_frob_control(port,
PARPORT_CONTROL_STROBE |
PARPORT_CONTROL_AUTOFD,
PARPORT_CONTROL_AUTOFD); */
- r = change_mode (port, ECR_ECP); /* ECP FIFO */
- if (r) printk (KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n", port->name);
+ r = change_mode(port, ECR_ECP); /* ECP FIFO */
+ if (r)
+ printk(KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n",
+ port->name);
port->ieee1284.phase = IEEE1284_PH_REV_DATA;
/* the first byte must be collected manually */
-dump_parport_state ("pre 43", port);
+ dump_parport_state("pre 43", port);
/* Event 43: Wait for nAck to go low */
- r = parport_wait_peripheral (port, PARPORT_STATUS_ACK, 0);
+ r = parport_wait_peripheral(port, PARPORT_STATUS_ACK, 0);
if (r) {
/* timed out while reading -- no data */
- printk (KERN_DEBUG "PIO read timed out (initial byte)\n");
+ printk(KERN_DEBUG "PIO read timed out (initial byte)\n");
goto out_no_data;
}
/* read byte */
- *bufp++ = inb (DATA (port));
+ *bufp++ = inb(DATA(port));
left--;
-dump_parport_state ("43-44", port);
+ dump_parport_state("43-44", port);
/* Event 44: nAutoFd (HostAck) goes high to acknowledge */
- parport_pc_frob_control (port,
+ parport_pc_frob_control(port,
PARPORT_CONTROL_AUTOFD,
0);
-dump_parport_state ("pre 45", port);
+ dump_parport_state("pre 45", port);
/* Event 45: Wait for nAck to go high */
-/* r = parport_wait_peripheral (port, PARPORT_STATUS_ACK, PARPORT_STATUS_ACK); */
-dump_parport_state ("post 45", port);
-r = 0;
+ /* r = parport_wait_peripheral(port, PARPORT_STATUS_ACK,
+ PARPORT_STATUS_ACK); */
+ dump_parport_state("post 45", port);
+ r = 0;
if (r) {
/* timed out while waiting for peripheral to respond to ack */
- printk (KERN_DEBUG "ECP PIO read timed out (waiting for nAck)\n");
+ printk(KERN_DEBUG "ECP PIO read timed out (waiting for nAck)\n");
/* keep hold of the byte we've got already */
goto out_no_data;
}
/* Event 46: nAutoFd (HostAck) goes low to accept more data */
- parport_pc_frob_control (port,
+ parport_pc_frob_control(port,
PARPORT_CONTROL_AUTOFD,
PARPORT_CONTROL_AUTOFD);
-dump_parport_state ("rev idle", port);
+ dump_parport_state("rev idle", port);
/* Do the transfer. */
while (left > fifofull) {
int ret;
unsigned long expire = jiffies + port->cad->timeout;
- unsigned char ecrval = inb (ECONTROL (port));
+ unsigned char ecrval = inb(ECONTROL(port));
- if (need_resched() && time_before (jiffies, expire))
+ if (need_resched() && time_before(jiffies, expire))
/* Can't yield the port. */
- schedule ();
+ schedule();
/* At this point, the FIFO may already be full. In
- * that case ECP is already holding back the
- * peripheral (assuming proper design) with a delayed
- * handshake. Work fast to avoid a peripheral
- * timeout. */
+ * that case ECP is already holding back the
+ * peripheral (assuming proper design) with a delayed
+ * handshake. Work fast to avoid a peripheral
+ * timeout. */
if (ecrval & 0x01) {
/* FIFO is empty. Wait for interrupt. */
-dump_parport_state ("FIFO empty", port);
+ dump_parport_state("FIFO empty", port);
/* Anyone else waiting for the port? */
if (port->waithead) {
- printk (KERN_DEBUG "Somebody wants the port\n");
+ printk(KERN_DEBUG "Somebody wants the port\n");
break;
}
/* Clear serviceIntr */
- ECR_WRITE (port, ecrval & ~(1<<2));
- false_alarm:
-dump_parport_state ("waiting", port);
- ret = parport_wait_event (port, HZ);
-DPRINTK (KERN_DEBUG "parport_wait_event returned %d\n", ret);
+ ECR_WRITE(port, ecrval & ~(1<<2));
+false_alarm:
+ dump_parport_state("waiting", port);
+ ret = parport_wait_event(port, HZ);
+ DPRINTK(KERN_DEBUG "parport_wait_event returned %d\n",
+ ret);
if (ret < 0)
break;
ret = 0;
- if (!time_before (jiffies, expire)) {
+ if (!time_before(jiffies, expire)) {
/* Timed out. */
-dump_parport_state ("timeout", port);
- printk (KERN_DEBUG "PIO read timed out\n");
+ dump_parport_state("timeout", port);
+ printk(KERN_DEBUG "PIO read timed out\n");
break;
}
- ecrval = inb (ECONTROL (port));
+ ecrval = inb(ECONTROL(port));
if (!(ecrval & (1<<2))) {
if (need_resched() &&
- time_before (jiffies, expire)) {
- schedule ();
+ time_before(jiffies, expire)) {
+ schedule();
}
goto false_alarm;
}
/* Depending on how the FIFO threshold was
- * set, how long interrupt service took, and
- * how fast the peripheral is, we might be
- * lucky and have a just filled FIFO. */
+ * set, how long interrupt service took, and
+ * how fast the peripheral is, we might be
+ * lucky and have a just filled FIFO. */
continue;
}
if (ecrval & 0x02) {
/* FIFO is full. */
-dump_parport_state ("FIFO full", port);
- insb (fifo, bufp, fifo_depth);
+ dump_parport_state("FIFO full", port);
+ insb(fifo, bufp, fifo_depth);
bufp += fifo_depth;
left -= fifo_depth;
continue;
}
-DPRINTK (KERN_DEBUG "*** ecp_read_block_pio: reading one byte from the FIFO\n");
+ DPRINTK(KERN_DEBUG
+ "*** ecp_read_block_pio: reading one byte from the FIFO\n");
/* FIFO not filled. We will cycle this loop for a while
- * and either the peripheral will fill it faster,
- * tripping a fast empty with insb, or we empty it. */
- *bufp++ = inb (fifo);
+ * and either the peripheral will fill it faster,
+ * tripping a fast empty with insb, or we empty it. */
+ *bufp++ = inb(fifo);
left--;
}
/* scoop up anything left in the FIFO */
- while (left && !(inb (ECONTROL (port) & 0x01))) {
- *bufp++ = inb (fifo);
+ while (left && !(inb(ECONTROL(port) & 0x01))) {
+ *bufp++ = inb(fifo);
left--;
}
port->ieee1284.phase = IEEE1284_PH_REV_IDLE;
-dump_parport_state ("rev idle2", port);
+ dump_parport_state("rev idle2", port);
out_no_data:
/* Go to forward idle mode to shut the peripheral up (event 47). */
- parport_frob_control (port, PARPORT_CONTROL_INIT, PARPORT_CONTROL_INIT);
+ parport_frob_control(port, PARPORT_CONTROL_INIT, PARPORT_CONTROL_INIT);
/* event 49: PError goes high */
- r = parport_wait_peripheral (port,
+ r = parport_wait_peripheral(port,
PARPORT_STATUS_PAPEROUT,
PARPORT_STATUS_PAPEROUT);
if (r) {
- printk (KERN_DEBUG
+ printk(KERN_DEBUG
"%s: PE timeout FWDIDLE (%d) in ecp_read_block_pio\n",
port->name, r);
}
@@ -1141,14 +1157,14 @@
/* Finish up. */
{
- int lost = get_fifo_residue (port);
+ int lost = get_fifo_residue(port);
if (lost)
/* Shouldn't happen with compliant peripherals. */
- printk (KERN_DEBUG "%s: DATA LOSS (%d bytes)!\n",
+ printk(KERN_DEBUG "%s: DATA LOSS (%d bytes)!\n",
port->name, lost);
}
-dump_parport_state ("fwd idle", port);
+ dump_parport_state("fwd idle", port);
return length - left;
}
#endif /* 0 */
@@ -1164,8 +1180,7 @@
/* GCC is not inlining extern inline function later overwriten to non-inline,
so we use outlined_ variants here. */
-static const struct parport_operations parport_pc_ops =
-{
+static const struct parport_operations parport_pc_ops = {
.write_data = parport_pc_write_data,
.read_data = parport_pc_read_data,
@@ -1202,88 +1217,107 @@
};
#ifdef CONFIG_PARPORT_PC_SUPERIO
+
+static struct superio_struct *find_free_superio(void)
+{
+ int i;
+ for (i = 0; i < NR_SUPERIOS; i++)
+ if (superios[i].io == 0)
+ return &superios[i];
+ return NULL;
+}
+
+
/* Super-IO chipset detection, Winbond, SMSC */
static void __devinit show_parconfig_smsc37c669(int io, int key)
{
- int cr1,cr4,cra,cr23,cr26,cr27,i=0;
- static const char *const modes[]={
+ int cr1, cr4, cra, cr23, cr26, cr27;
+ struct superio_struct *s;
+
+ static const char *const modes[] = {
"SPP and Bidirectional (PS/2)",
"EPP and SPP",
"ECP",
"ECP and EPP" };
- outb(key,io);
- outb(key,io);
- outb(1,io);
- cr1=inb(io+1);
- outb(4,io);
- cr4=inb(io+1);
- outb(0x0a,io);
- cra=inb(io+1);
- outb(0x23,io);
- cr23=inb(io+1);
- outb(0x26,io);
- cr26=inb(io+1);
- outb(0x27,io);
- cr27=inb(io+1);
- outb(0xaa,io);
+ outb(key, io);
+ outb(key, io);
+ outb(1, io);
+ cr1 = inb(io + 1);
+ outb(4, io);
+ cr4 = inb(io + 1);
+ outb(0x0a, io);
+ cra = inb(io + 1);
+ outb(0x23, io);
+ cr23 = inb(io + 1);
+ outb(0x26, io);
+ cr26 = inb(io + 1);
+ outb(0x27, io);
+ cr27 = inb(io + 1);
+ outb(0xaa, io);
if (verbose_probing) {
- printk (KERN_INFO "SMSC 37c669 LPT Config: cr_1=0x%02x, 4=0x%02x, "
+ printk(KERN_INFO
+ "SMSC 37c669 LPT Config: cr_1=0x%02x, 4=0x%02x, "
"A=0x%2x, 23=0x%02x, 26=0x%02x, 27=0x%02x\n",
- cr1,cr4,cra,cr23,cr26,cr27);
-
+ cr1, cr4, cra, cr23, cr26, cr27);
+
/* The documentation calls DMA and IRQ-Lines by letters, so
the board maker can/will wire them
appropriately/randomly... G=reserved H=IDE-irq, */
- printk (KERN_INFO "SMSC LPT Config: io=0x%04x, irq=%c, dma=%c, "
- "fifo threshold=%d\n", cr23*4,
- (cr27 &0x0f) ? 'A'-1+(cr27 &0x0f): '-',
- (cr26 &0x0f) ? 'A'-1+(cr26 &0x0f): '-', cra & 0x0f);
+ printk(KERN_INFO
+ "SMSC LPT Config: io=0x%04x, irq=%c, dma=%c, fifo threshold=%d\n",
+ cr23 * 4,
+ (cr27 & 0x0f) ? 'A' - 1 + (cr27 & 0x0f) : '-',
+ (cr26 & 0x0f) ? 'A' - 1 + (cr26 & 0x0f) : '-',
+ cra & 0x0f);
printk(KERN_INFO "SMSC LPT Config: enabled=%s power=%s\n",
- (cr23*4 >=0x100) ?"yes":"no", (cr1 & 4) ? "yes" : "no");
- printk(KERN_INFO "SMSC LPT Config: Port mode=%s, EPP version =%s\n",
- (cr1 & 0x08 ) ? "Standard mode only (SPP)" : modes[cr4 & 0x03],
- (cr4 & 0x40) ? "1.7" : "1.9");
+ (cr23 * 4 >= 0x100) ? "yes" : "no",
+ (cr1 & 4) ? "yes" : "no");
+ printk(KERN_INFO
+ "SMSC LPT Config: Port mode=%s, EPP version =%s\n",
+ (cr1 & 0x08) ? "Standard mode only (SPP)"
+ : modes[cr4 & 0x03],
+ (cr4 & 0x40) ? "1.7" : "1.9");
}
-
+
/* Heuristics ! BIOS setup for this mainboard device limits
the choices to standard settings, i.e. io-address and IRQ
are related, however DMA can be 1 or 3, assume DMA_A=DMA1,
DMA_C=DMA3 (this is true e.g. for TYAN 1564D Tomcat IV) */
- if(cr23*4 >=0x100) { /* if active */
- while((superios[i].io!= 0) && (i<NR_SUPERIOS))
- i++;
- if(i==NR_SUPERIOS)
+ if (cr23 * 4 >= 0x100) { /* if active */
+ s = find_free_superio();
+ if (s == NULL)
printk(KERN_INFO "Super-IO: too many chips!\n");
else {
int d;
- switch (cr23*4) {
- case 0x3bc:
- superios[i].io = 0x3bc;
- superios[i].irq = 7;
- break;
- case 0x378:
- superios[i].io = 0x378;
- superios[i].irq = 7;
- break;
- case 0x278:
- superios[i].io = 0x278;
- superios[i].irq = 5;
+ switch (cr23 * 4) {
+ case 0x3bc:
+ s->io = 0x3bc;
+ s->irq = 7;
+ break;
+ case 0x378:
+ s->io = 0x378;
+ s->irq = 7;
+ break;
+ case 0x278:
+ s->io = 0x278;
+ s->irq = 5;
}
- d=(cr26 &0x0f);
- if((d==1) || (d==3))
- superios[i].dma= d;
+ d = (cr26 & 0x0f);
+ if (d == 1 || d == 3)
+ s->dma = d;
else
- superios[i].dma= PARPORT_DMA_NONE;
+ s->dma = PARPORT_DMA_NONE;
}
- }
+ }
}
static void __devinit show_parconfig_winbond(int io, int key)
{
- int cr30,cr60,cr61,cr70,cr74,crf0,i=0;
+ int cr30, cr60, cr61, cr70, cr74, crf0;
+ struct superio_struct *s;
static const char *const modes[] = {
"Standard (SPP) and Bidirectional(PS/2)", /* 0 */
"EPP-1.9 and SPP",
@@ -1296,110 +1330,134 @@
static char *const irqtypes[] = {
"pulsed low, high-Z",
"follows nACK" };
-
+
/* The registers are called compatible-PnP because the
- register layout is modelled after ISA-PnP, the access
- method is just another ... */
- outb(key,io);
- outb(key,io);
- outb(0x07,io); /* Register 7: Select Logical Device */
- outb(0x01,io+1); /* LD1 is Parallel Port */
- outb(0x30,io);
- cr30=inb(io+1);
- outb(0x60,io);
- cr60=inb(io+1);
- outb(0x61,io);
- cr61=inb(io+1);
- outb(0x70,io);
- cr70=inb(io+1);
- outb(0x74,io);
- cr74=inb(io+1);
- outb(0xf0,io);
- crf0=inb(io+1);
- outb(0xaa,io);
+ register layout is modelled after ISA-PnP, the access
+ method is just another ... */
+ outb(key, io);
+ outb(key, io);
+ outb(0x07, io); /* Register 7: Select Logical Device */
+ outb(0x01, io + 1); /* LD1 is Parallel Port */
+ outb(0x30, io);
+ cr30 = inb(io + 1);
+ outb(0x60, io);
+ cr60 = inb(io + 1);
+ outb(0x61, io);
+ cr61 = inb(io + 1);
+ outb(0x70, io);
+ cr70 = inb(io + 1);
+ outb(0x74, io);
+ cr74 = inb(io + 1);
+ outb(0xf0, io);
+ crf0 = inb(io + 1);
+ outb(0xaa, io);
if (verbose_probing) {
- printk(KERN_INFO "Winbond LPT Config: cr_30=%02x 60,61=%02x%02x "
- "70=%02x 74=%02x, f0=%02x\n", cr30,cr60,cr61,cr70,cr74,crf0);
- printk(KERN_INFO "Winbond LPT Config: active=%s, io=0x%02x%02x irq=%d, ",
- (cr30 & 0x01) ? "yes":"no", cr60,cr61,cr70&0x0f );
+ printk(KERN_INFO
+ "Winbond LPT Config: cr_30=%02x 60,61=%02x%02x 70=%02x 74=%02x, f0=%02x\n",
+ cr30, cr60, cr61, cr70, cr74, crf0);
+ printk(KERN_INFO "Winbond LPT Config: active=%s, io=0x%02x%02x irq=%d, ",
+ (cr30 & 0x01) ? "yes" : "no", cr60, cr61, cr70 & 0x0f);
if ((cr74 & 0x07) > 3)
printk("dma=none\n");
else
- printk("dma=%d\n",cr74 & 0x07);
- printk(KERN_INFO "Winbond LPT Config: irqtype=%s, ECP fifo threshold=%d\n",
- irqtypes[crf0>>7], (crf0>>3)&0x0f);
- printk(KERN_INFO "Winbond LPT Config: Port mode=%s\n", modes[crf0 & 0x07]);
+ printk("dma=%d\n", cr74 & 0x07);
+ printk(KERN_INFO
+ "Winbond LPT Config: irqtype=%s, ECP fifo threshold=%d\n",
+ irqtypes[crf0>>7], (crf0>>3)&0x0f);
+ printk(KERN_INFO "Winbond LPT Config: Port mode=%s\n",
+ modes[crf0 & 0x07]);
}
- if(cr30 & 0x01) { /* the settings can be interrogated later ... */
- while((superios[i].io!= 0) && (i<NR_SUPERIOS))
- i++;
- if(i==NR_SUPERIOS)
+ if (cr30 & 0x01) { /* the settings can be interrogated later ... */
+ s = find_free_superio();
+ if (s == NULL)
printk(KERN_INFO "Super-IO: too many chips!\n");
else {
- superios[i].io = (cr60<<8)|cr61;
- superios[i].irq = cr70&0x0f;
- superios[i].dma = (((cr74 & 0x07) > 3) ?
+ s->io = (cr60 << 8) | cr61;
+ s->irq = cr70 & 0x0f;
+ s->dma = (((cr74 & 0x07) > 3) ?
PARPORT_DMA_NONE : (cr74 & 0x07));
}
}
}
-static void __devinit decode_winbond(int efer, int key, int devid, int devrev, int oldid)
+static void __devinit decode_winbond(int efer, int key, int devid,
+ int devrev, int oldid)
{
const char *type = "unknown";
- int id,progif=2;
+ int id, progif = 2;
if (devid == devrev)
/* simple heuristics, we happened to read some
- non-winbond register */
+ non-winbond register */
return;
- id=(devid<<8) | devrev;
+ id = (devid << 8) | devrev;
/* Values are from public data sheets pdf files, I can just
- confirm 83977TF is correct :-) */
- if (id == 0x9771) type="83977F/AF";
- else if (id == 0x9773) type="83977TF / SMSC 97w33x/97w34x";
- else if (id == 0x9774) type="83977ATF";
- else if ((id & ~0x0f) == 0x5270) type="83977CTF / SMSC 97w36x";
- else if ((id & ~0x0f) == 0x52f0) type="83977EF / SMSC 97w35x";
- else if ((id & ~0x0f) == 0x5210) type="83627";
- else if ((id & ~0x0f) == 0x6010) type="83697HF";
- else if ((oldid &0x0f ) == 0x0a) { type="83877F"; progif=1;}
- else if ((oldid &0x0f ) == 0x0b) { type="83877AF"; progif=1;}
- else if ((oldid &0x0f ) == 0x0c) { type="83877TF"; progif=1;}
- else if ((oldid &0x0f ) == 0x0d) { type="83877ATF"; progif=1;}
- else progif=0;
+ confirm 83977TF is correct :-) */
+ if (id == 0x9771)
+ type = "83977F/AF";
+ else if (id == 0x9773)
+ type = "83977TF / SMSC 97w33x/97w34x";
+ else if (id == 0x9774)
+ type = "83977ATF";
+ else if ((id & ~0x0f) == 0x5270)
+ type = "83977CTF / SMSC 97w36x";
+ else if ((id & ~0x0f) == 0x52f0)
+ type = "83977EF / SMSC 97w35x";
+ else if ((id & ~0x0f) == 0x5210)
+ type = "83627";
+ else if ((id & ~0x0f) == 0x6010)
+ type = "83697HF";
+ else if ((oldid & 0x0f) == 0x0a) {
+ type = "83877F";
+ progif = 1;
+ } else if ((oldid & 0x0f) == 0x0b) {
+ type = "83877AF";
+ progif = 1;
+ } else if ((oldid & 0x0f) == 0x0c) {
+ type = "83877TF";
+ progif = 1;
+ } else if ((oldid & 0x0f) == 0x0d) {
+ type = "83877ATF";
+ progif = 1;
+ } else
+ progif = 0;
if (verbose_probing)
printk(KERN_INFO "Winbond chip at EFER=0x%x key=0x%02x "
- "devid=%02x devrev=%02x oldid=%02x type=%s\n",
+ "devid=%02x devrev=%02x oldid=%02x type=%s\n",
efer, key, devid, devrev, oldid, type);
if (progif == 2)
- show_parconfig_winbond(efer,key);
+ show_parconfig_winbond(efer, key);
}
static void __devinit decode_smsc(int efer, int key, int devid, int devrev)
{
- const char *type = "unknown";
+ const char *type = "unknown";
void (*func)(int io, int key);
- int id;
+ int id;
- if (devid == devrev)
+ if (devid == devrev)
/* simple heuristics, we happened to read some
- non-smsc register */
+ non-smsc register */
return;
- func=NULL;
- id=(devid<<8) | devrev;
+ func = NULL;
+ id = (devid << 8) | devrev;
- if (id==0x0302) {type="37c669"; func=show_parconfig_smsc37c669;}
- else if (id==0x6582) type="37c665IR";
- else if (devid==0x65) type="37c665GT";
- else if (devid==0x66) type="37c666GT";
+ if (id == 0x0302) {
+ type = "37c669";
+ func = show_parconfig_smsc37c669;
+ } else if (id == 0x6582)
+ type = "37c665IR";
+ else if (devid == 0x65)
+ type = "37c665GT";
+ else if (devid == 0x66)
+ type = "37c666GT";
if (verbose_probing)
printk(KERN_INFO "SMSC chip at EFER=0x%x "
@@ -1407,138 +1465,138 @@
efer, key, devid, devrev, type);
if (func)
- func(efer,key);
+ func(efer, key);
}
static void __devinit winbond_check(int io, int key)
{
- int devid,devrev,oldid,x_devid,x_devrev,x_oldid;
+ int devid, devrev, oldid, x_devid, x_devrev, x_oldid;
if (!request_region(io, 3, __func__))
return;
/* First probe without key */
- outb(0x20,io);
- x_devid=inb(io+1);
- outb(0x21,io);
- x_devrev=inb(io+1);
- outb(0x09,io);
- x_oldid=inb(io+1);
+ outb(0x20, io);
+ x_devid = inb(io + 1);
+ outb(0x21, io);
+ x_devrev = inb(io + 1);
+ outb(0x09, io);
+ x_oldid = inb(io + 1);
- outb(key,io);
- outb(key,io); /* Write Magic Sequence to EFER, extended
- funtion enable register */
- outb(0x20,io); /* Write EFIR, extended function index register */
- devid=inb(io+1); /* Read EFDR, extended function data register */
- outb(0x21,io);
- devrev=inb(io+1);
- outb(0x09,io);
- oldid=inb(io+1);
- outb(0xaa,io); /* Magic Seal */
+ outb(key, io);
+ outb(key, io); /* Write Magic Sequence to EFER, extended
+ funtion enable register */
+ outb(0x20, io); /* Write EFIR, extended function index register */
+ devid = inb(io + 1); /* Read EFDR, extended function data register */
+ outb(0x21, io);
+ devrev = inb(io + 1);
+ outb(0x09, io);
+ oldid = inb(io + 1);
+ outb(0xaa, io); /* Magic Seal */
if ((x_devid == devid) && (x_devrev == devrev) && (x_oldid == oldid))
goto out; /* protection against false positives */
- decode_winbond(io,key,devid,devrev,oldid);
+ decode_winbond(io, key, devid, devrev, oldid);
out:
release_region(io, 3);
}
-static void __devinit winbond_check2(int io,int key)
+static void __devinit winbond_check2(int io, int key)
{
- int devid,devrev,oldid,x_devid,x_devrev,x_oldid;
+ int devid, devrev, oldid, x_devid, x_devrev, x_oldid;
if (!request_region(io, 3, __func__))
return;
/* First probe without the key */
- outb(0x20,io+2);
- x_devid=inb(io+2);
- outb(0x21,io+1);
- x_devrev=inb(io+2);
- outb(0x09,io+1);
- x_oldid=inb(io+2);
+ outb(0x20, io + 2);
+ x_devid = inb(io + 2);
+ outb(0x21, io + 1);
+ x_devrev = inb(io + 2);
+ outb(0x09, io + 1);
+ x_oldid = inb(io + 2);
- outb(key,io); /* Write Magic Byte to EFER, extended
- funtion enable register */
- outb(0x20,io+2); /* Write EFIR, extended function index register */
- devid=inb(io+2); /* Read EFDR, extended function data register */
- outb(0x21,io+1);
- devrev=inb(io+2);
- outb(0x09,io+1);
- oldid=inb(io+2);
- outb(0xaa,io); /* Magic Seal */
+ outb(key, io); /* Write Magic Byte to EFER, extended
+ funtion enable register */
+ outb(0x20, io + 2); /* Write EFIR, extended function index register */
+ devid = inb(io + 2); /* Read EFDR, extended function data register */
+ outb(0x21, io + 1);
+ devrev = inb(io + 2);
+ outb(0x09, io + 1);
+ oldid = inb(io + 2);
+ outb(0xaa, io); /* Magic Seal */
- if ((x_devid == devid) && (x_devrev == devrev) && (x_oldid == oldid))
+ if (x_devid == devid && x_devrev == devrev && x_oldid == oldid)
goto out; /* protection against false positives */
- decode_winbond(io,key,devid,devrev,oldid);
+ decode_winbond(io, key, devid, devrev, oldid);
out:
release_region(io, 3);
}
static void __devinit smsc_check(int io, int key)
{
- int id,rev,oldid,oldrev,x_id,x_rev,x_oldid,x_oldrev;
+ int id, rev, oldid, oldrev, x_id, x_rev, x_oldid, x_oldrev;
if (!request_region(io, 3, __func__))
return;
/* First probe without the key */
- outb(0x0d,io);
- x_oldid=inb(io+1);
- outb(0x0e,io);
- x_oldrev=inb(io+1);
- outb(0x20,io);
- x_id=inb(io+1);
- outb(0x21,io);
- x_rev=inb(io+1);
+ outb(0x0d, io);
+ x_oldid = inb(io + 1);
+ outb(0x0e, io);
+ x_oldrev = inb(io + 1);
+ outb(0x20, io);
+ x_id = inb(io + 1);
+ outb(0x21, io);
+ x_rev = inb(io + 1);
- outb(key,io);
- outb(key,io); /* Write Magic Sequence to EFER, extended
- funtion enable register */
- outb(0x0d,io); /* Write EFIR, extended function index register */
- oldid=inb(io+1); /* Read EFDR, extended function data register */
- outb(0x0e,io);
- oldrev=inb(io+1);
- outb(0x20,io);
- id=inb(io+1);
- outb(0x21,io);
- rev=inb(io+1);
- outb(0xaa,io); /* Magic Seal */
+ outb(key, io);
+ outb(key, io); /* Write Magic Sequence to EFER, extended
+ funtion enable register */
+ outb(0x0d, io); /* Write EFIR, extended function index register */
+ oldid = inb(io + 1); /* Read EFDR, extended function data register */
+ outb(0x0e, io);
+ oldrev = inb(io + 1);
+ outb(0x20, io);
+ id = inb(io + 1);
+ outb(0x21, io);
+ rev = inb(io + 1);
+ outb(0xaa, io); /* Magic Seal */
- if ((x_id == id) && (x_oldrev == oldrev) &&
- (x_oldid == oldid) && (x_rev == rev))
+ if (x_id == id && x_oldrev == oldrev &&
+ x_oldid == oldid && x_rev == rev)
goto out; /* protection against false positives */
- decode_smsc(io,key,oldid,oldrev);
+ decode_smsc(io, key, oldid, oldrev);
out:
release_region(io, 3);
}
-static void __devinit detect_and_report_winbond (void)
-{
+static void __devinit detect_and_report_winbond(void)
+{
if (verbose_probing)
printk(KERN_DEBUG "Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...\n");
- winbond_check(0x3f0,0x87);
- winbond_check(0x370,0x87);
- winbond_check(0x2e ,0x87);
- winbond_check(0x4e ,0x87);
- winbond_check(0x3f0,0x86);
- winbond_check2(0x250,0x88);
- winbond_check2(0x250,0x89);
+ winbond_check(0x3f0, 0x87);
+ winbond_check(0x370, 0x87);
+ winbond_check(0x2e , 0x87);
+ winbond_check(0x4e , 0x87);
+ winbond_check(0x3f0, 0x86);
+ winbond_check2(0x250, 0x88);
+ winbond_check2(0x250, 0x89);
}
-static void __devinit detect_and_report_smsc (void)
+static void __devinit detect_and_report_smsc(void)
{
if (verbose_probing)
printk(KERN_DEBUG "SMSC Super-IO detection, now testing Ports 2F0, 370 ...\n");
- smsc_check(0x3f0,0x55);
- smsc_check(0x370,0x55);
- smsc_check(0x3f0,0x44);
- smsc_check(0x370,0x44);
+ smsc_check(0x3f0, 0x55);
+ smsc_check(0x370, 0x55);
+ smsc_check(0x3f0, 0x44);
+ smsc_check(0x370, 0x44);
}
static void __devinit detect_and_report_it87(void)
@@ -1573,34 +1631,39 @@
}
#endif /* CONFIG_PARPORT_PC_SUPERIO */
-static int get_superio_dma (struct parport *p)
+static struct superio_struct *find_superio(struct parport *p)
{
- int i=0;
- while( (superios[i].io != p->base) && (i<NR_SUPERIOS))
- i++;
- if (i!=NR_SUPERIOS)
- return superios[i].dma;
+ int i;
+ for (i = 0; i < NR_SUPERIOS; i++)
+ if (superios[i].io != p->base)
+ return &superios[i];
+ return NULL;
+}
+
+static int get_superio_dma(struct parport *p)
+{
+ struct superio_struct *s = find_superio(p);
+ if (s)
+ return s->dma;
return PARPORT_DMA_NONE;
}
-static int get_superio_irq (struct parport *p)
+static int get_superio_irq(struct parport *p)
{
- int i=0;
- while( (superios[i].io != p->base) && (i<NR_SUPERIOS))
- i++;
- if (i!=NR_SUPERIOS)
- return superios[i].irq;
- return PARPORT_IRQ_NONE;
+ struct superio_struct *s = find_superio(p);
+ if (s)
+ return s->irq;
+ return PARPORT_IRQ_NONE;
}
-
+
/* --- Mode detection ------------------------------------- */
/*
* Checks for port existence, all ports support SPP MODE
- * Returns:
+ * Returns:
* 0 : No parallel port at this address
- * PARPORT_MODE_PCSPP : SPP port detected
+ * PARPORT_MODE_PCSPP : SPP port detected
* (if the user specified an ioport himself,
* this shall always be the case!)
*
@@ -1610,7 +1673,7 @@
unsigned char r, w;
/*
- * first clear an eventually pending EPP timeout
+ * first clear an eventually pending EPP timeout
* I (sailer@ife.ee.ethz.ch) have an SMSC chipset
* that does not even respond to SPP cycles if an EPP
* timeout is pending
@@ -1619,19 +1682,19 @@
/* Do a simple read-write test to make sure the port exists. */
w = 0xc;
- outb (w, CONTROL (pb));
+ outb(w, CONTROL(pb));
/* Is there a control register that we can read from? Some
* ports don't allow reads, so read_control just returns a
* software copy. Some ports _do_ allow reads, so bypass the
* software copy here. In addition, some bits aren't
* writable. */
- r = inb (CONTROL (pb));
+ r = inb(CONTROL(pb));
if ((r & 0xf) == w) {
w = 0xe;
- outb (w, CONTROL (pb));
- r = inb (CONTROL (pb));
- outb (0xc, CONTROL (pb));
+ outb(w, CONTROL(pb));
+ r = inb(CONTROL(pb));
+ outb(0xc, CONTROL(pb));
if ((r & 0xf) == w)
return PARPORT_MODE_PCSPP;
}
@@ -1639,18 +1702,18 @@
if (user_specified)
/* That didn't work, but the user thinks there's a
* port here. */
- printk (KERN_INFO "parport 0x%lx (WARNING): CTR: "
+ printk(KERN_INFO "parport 0x%lx (WARNING): CTR: "
"wrote 0x%02x, read 0x%02x\n", pb->base, w, r);
/* Try the data register. The data lines aren't tri-stated at
* this stage, so we expect back what we wrote. */
w = 0xaa;
- parport_pc_write_data (pb, w);
- r = parport_pc_read_data (pb);
+ parport_pc_write_data(pb, w);
+ r = parport_pc_read_data(pb);
if (r == w) {
w = 0x55;
- parport_pc_write_data (pb, w);
- r = parport_pc_read_data (pb);
+ parport_pc_write_data(pb, w);
+ r = parport_pc_read_data(pb);
if (r == w)
return PARPORT_MODE_PCSPP;
}
@@ -1658,9 +1721,9 @@
if (user_specified) {
/* Didn't work, but the user is convinced this is the
* place. */
- printk (KERN_INFO "parport 0x%lx (WARNING): DATA: "
+ printk(KERN_INFO "parport 0x%lx (WARNING): DATA: "
"wrote 0x%02x, read 0x%02x\n", pb->base, w, r);
- printk (KERN_INFO "parport 0x%lx: You gave this address, "
+ printk(KERN_INFO "parport 0x%lx: You gave this address, "
"but there is probably no parallel port there!\n",
pb->base);
}
@@ -1691,33 +1754,33 @@
struct parport_pc_private *priv = pb->private_data;
unsigned char r = 0xc;
- outb (r, CONTROL (pb));
- if ((inb (ECONTROL (pb)) & 0x3) == (r & 0x3)) {
- outb (r ^ 0x2, CONTROL (pb)); /* Toggle bit 1 */
+ outb(r, CONTROL(pb));
+ if ((inb(ECONTROL(pb)) & 0x3) == (r & 0x3)) {
+ outb(r ^ 0x2, CONTROL(pb)); /* Toggle bit 1 */
- r = inb (CONTROL (pb));
- if ((inb (ECONTROL (pb)) & 0x2) == (r & 0x2))
+ r = inb(CONTROL(pb));
+ if ((inb(ECONTROL(pb)) & 0x2) == (r & 0x2))
goto no_reg; /* Sure that no ECR register exists */
}
-
- if ((inb (ECONTROL (pb)) & 0x3 ) != 0x1)
+
+ if ((inb(ECONTROL(pb)) & 0x3) != 0x1)
goto no_reg;
- ECR_WRITE (pb, 0x34);
- if (inb (ECONTROL (pb)) != 0x35)
+ ECR_WRITE(pb, 0x34);
+ if (inb(ECONTROL(pb)) != 0x35)
goto no_reg;
priv->ecr = 1;
- outb (0xc, CONTROL (pb));
-
+ outb(0xc, CONTROL(pb));
+
/* Go to mode 000 */
- frob_set_mode (pb, ECR_SPP);
+ frob_set_mode(pb, ECR_SPP);
return 1;
no_reg:
- outb (0xc, CONTROL (pb));
- return 0;
+ outb(0xc, CONTROL(pb));
+ return 0;
}
#ifdef CONFIG_PARPORT_1284
@@ -1727,7 +1790,7 @@
* allows us to read data from the data lines. In theory we would get back
* 0xff but any peripheral attached to the port may drag some or all of the
* lines down to zero. So if we get back anything that isn't the contents
- * of the data register we deem PS/2 support to be present.
+ * of the data register we deem PS/2 support to be present.
*
* Some SPP ports have "half PS/2" ability - you can't turn off the line
* drivers, but an external peripheral with sufficiently beefy drivers of
@@ -1735,26 +1798,28 @@
* where they can then be read back as normal. Ports with this property
* and the right type of device attached are likely to fail the SPP test,
* (as they will appear to have stuck bits) and so the fact that they might
- * be misdetected here is rather academic.
+ * be misdetected here is rather academic.
*/
static int parport_PS2_supported(struct parport *pb)
{
int ok = 0;
-
+
clear_epp_timeout(pb);
/* try to tri-state the buffer */
- parport_pc_data_reverse (pb);
-
+ parport_pc_data_reverse(pb);
+
parport_pc_write_data(pb, 0x55);
- if (parport_pc_read_data(pb) != 0x55) ok++;
+ if (parport_pc_read_data(pb) != 0x55)
+ ok++;
parport_pc_write_data(pb, 0xaa);
- if (parport_pc_read_data(pb) != 0xaa) ok++;
+ if (parport_pc_read_data(pb) != 0xaa)
+ ok++;
/* cancel input mode */
- parport_pc_data_forward (pb);
+ parport_pc_data_forward(pb);
if (ok) {
pb->modes |= PARPORT_MODE_TRISTATE;
@@ -1773,68 +1838,68 @@
int config, configb;
int pword;
struct parport_pc_private *priv = pb->private_data;
- /* Translate ECP intrLine to ISA irq value */
- static const int intrline[]= { 0, 7, 9, 10, 11, 14, 15, 5 };
+ /* Translate ECP intrLine to ISA irq value */
+ static const int intrline[] = { 0, 7, 9, 10, 11, 14, 15, 5 };
/* If there is no ECR, we have no hope of supporting ECP. */
if (!priv->ecr)
return 0;
/* Find out FIFO depth */
- ECR_WRITE (pb, ECR_SPP << 5); /* Reset FIFO */
- ECR_WRITE (pb, ECR_TST << 5); /* TEST FIFO */
- for (i=0; i < 1024 && !(inb (ECONTROL (pb)) & 0x02); i++)
- outb (0xaa, FIFO (pb));
+ ECR_WRITE(pb, ECR_SPP << 5); /* Reset FIFO */
+ ECR_WRITE(pb, ECR_TST << 5); /* TEST FIFO */
+ for (i = 0; i < 1024 && !(inb(ECONTROL(pb)) & 0x02); i++)
+ outb(0xaa, FIFO(pb));
/*
* Using LGS chipset it uses ECR register, but
* it doesn't support ECP or FIFO MODE
*/
if (i == 1024) {
- ECR_WRITE (pb, ECR_SPP << 5);
+ ECR_WRITE(pb, ECR_SPP << 5);
return 0;
}
priv->fifo_depth = i;
if (verbose_probing)
- printk (KERN_DEBUG "0x%lx: FIFO is %d bytes\n", pb->base, i);
+ printk(KERN_DEBUG "0x%lx: FIFO is %d bytes\n", pb->base, i);
/* Find out writeIntrThreshold */
- frob_econtrol (pb, 1<<2, 1<<2);
- frob_econtrol (pb, 1<<2, 0);
+ frob_econtrol(pb, 1<<2, 1<<2);
+ frob_econtrol(pb, 1<<2, 0);
for (i = 1; i <= priv->fifo_depth; i++) {
- inb (FIFO (pb));
- udelay (50);
- if (inb (ECONTROL (pb)) & (1<<2))
+ inb(FIFO(pb));
+ udelay(50);
+ if (inb(ECONTROL(pb)) & (1<<2))
break;
}
if (i <= priv->fifo_depth) {
if (verbose_probing)
- printk (KERN_DEBUG "0x%lx: writeIntrThreshold is %d\n",
+ printk(KERN_DEBUG "0x%lx: writeIntrThreshold is %d\n",
pb->base, i);
} else
/* Number of bytes we know we can write if we get an
- interrupt. */
+ interrupt. */
i = 0;
priv->writeIntrThreshold = i;
/* Find out readIntrThreshold */
- frob_set_mode (pb, ECR_PS2); /* Reset FIFO and enable PS2 */
- parport_pc_data_reverse (pb); /* Must be in PS2 mode */
- frob_set_mode (pb, ECR_TST); /* Test FIFO */
- frob_econtrol (pb, 1<<2, 1<<2);
- frob_econtrol (pb, 1<<2, 0);
+ frob_set_mode(pb, ECR_PS2); /* Reset FIFO and enable PS2 */
+ parport_pc_data_reverse(pb); /* Must be in PS2 mode */
+ frob_set_mode(pb, ECR_TST); /* Test FIFO */
+ frob_econtrol(pb, 1<<2, 1<<2);
+ frob_econtrol(pb, 1<<2, 0);
for (i = 1; i <= priv->fifo_depth; i++) {
- outb (0xaa, FIFO (pb));
- if (inb (ECONTROL (pb)) & (1<<2))
+ outb(0xaa, FIFO(pb));
+ if (inb(ECONTROL(pb)) & (1<<2))
break;
}
if (i <= priv->fifo_depth) {
if (verbose_probing)
- printk (KERN_INFO "0x%lx: readIntrThreshold is %d\n",
+ printk(KERN_INFO "0x%lx: readIntrThreshold is %d\n",
pb->base, i);
} else
/* Number of bytes we can read if we get an interrupt. */
@@ -1842,23 +1907,23 @@
priv->readIntrThreshold = i;
- ECR_WRITE (pb, ECR_SPP << 5); /* Reset FIFO */
- ECR_WRITE (pb, 0xf4); /* Configuration mode */
- config = inb (CONFIGA (pb));
+ ECR_WRITE(pb, ECR_SPP << 5); /* Reset FIFO */
+ ECR_WRITE(pb, 0xf4); /* Configuration mode */
+ config = inb(CONFIGA(pb));
pword = (config >> 4) & 0x7;
switch (pword) {
case 0:
pword = 2;
- printk (KERN_WARNING "0x%lx: Unsupported pword size!\n",
+ printk(KERN_WARNING "0x%lx: Unsupported pword size!\n",
pb->base);
break;
case 2:
pword = 4;
- printk (KERN_WARNING "0x%lx: Unsupported pword size!\n",
+ printk(KERN_WARNING "0x%lx: Unsupported pword size!\n",
pb->base);
break;
default:
- printk (KERN_WARNING "0x%lx: Unknown implementation ID\n",
+ printk(KERN_WARNING "0x%lx: Unknown implementation ID\n",
pb->base);
/* Assume 1 */
case 1:
@@ -1867,28 +1932,29 @@
priv->pword = pword;
if (verbose_probing) {
- printk (KERN_DEBUG "0x%lx: PWord is %d bits\n", pb->base, 8 * pword);
-
- printk (KERN_DEBUG "0x%lx: Interrupts are ISA-%s\n", pb->base,
+ printk(KERN_DEBUG "0x%lx: PWord is %d bits\n",
+ pb->base, 8 * pword);
+
+ printk(KERN_DEBUG "0x%lx: Interrupts are ISA-%s\n", pb->base,
config & 0x80 ? "Level" : "Pulses");
- configb = inb (CONFIGB (pb));
- printk (KERN_DEBUG "0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n",
+ configb = inb(CONFIGB(pb));
+ printk(KERN_DEBUG "0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n",
pb->base, config, configb);
- printk (KERN_DEBUG "0x%lx: ECP settings irq=", pb->base);
- if ((configb >>3) & 0x07)
- printk("%d",intrline[(configb >>3) & 0x07]);
+ printk(KERN_DEBUG "0x%lx: ECP settings irq=", pb->base);
+ if ((configb >> 3) & 0x07)
+ printk("%d", intrline[(configb >> 3) & 0x07]);
else
printk("<none or set by other means>");
- printk (" dma=");
- if( (configb & 0x03 ) == 0x00)
+ printk(" dma=");
+ if ((configb & 0x03) == 0x00)
printk("<none or set by other means>\n");
else
- printk("%d\n",configb & 0x07);
+ printk("%d\n", configb & 0x07);
}
/* Go back to mode 000 */
- frob_set_mode (pb, ECR_SPP);
+ frob_set_mode(pb, ECR_SPP);
return 1;
}
@@ -1903,10 +1969,10 @@
if (!priv->ecr)
return 0;
- oecr = inb (ECONTROL (pb));
- ECR_WRITE (pb, ECR_PS2 << 5);
+ oecr = inb(ECONTROL(pb));
+ ECR_WRITE(pb, ECR_PS2 << 5);
result = parport_PS2_supported(pb);
- ECR_WRITE (pb, oecr);
+ ECR_WRITE(pb, oecr);
return result;
}
@@ -1930,16 +1996,15 @@
*/
/* If EPP timeout bit clear then EPP available */
- if (!clear_epp_timeout(pb)) {
+ if (!clear_epp_timeout(pb))
return 0; /* No way to clear timeout */
- }
/* Check for Intel bug. */
if (priv->ecr) {
unsigned char i;
for (i = 0x00; i < 0x80; i += 0x20) {
- ECR_WRITE (pb, i);
- if (clear_epp_timeout (pb)) {
+ ECR_WRITE(pb, i);
+ if (clear_epp_timeout(pb)) {
/* Phony EPP in ECP. */
return 0;
}
@@ -1963,17 +2028,16 @@
int result;
unsigned char oecr;
- if (!priv->ecr) {
+ if (!priv->ecr)
return 0;
- }
- oecr = inb (ECONTROL (pb));
+ oecr = inb(ECONTROL(pb));
/* Search for SMC style EPP+ECP mode */
- ECR_WRITE (pb, 0x80);
- outb (0x04, CONTROL (pb));
+ ECR_WRITE(pb, 0x80);
+ outb(0x04, CONTROL(pb));
result = parport_EPP_supported(pb);
- ECR_WRITE (pb, oecr);
+ ECR_WRITE(pb, oecr);
if (result) {
/* Set up access functions to use ECP+EPP hardware. */
@@ -1991,11 +2055,25 @@
/* Don't bother probing for modes we know we won't use. */
static int __devinit parport_PS2_supported(struct parport *pb) { return 0; }
#ifdef CONFIG_PARPORT_PC_FIFO
-static int parport_ECP_supported(struct parport *pb) { return 0; }
+static int parport_ECP_supported(struct parport *pb)
+{
+ return 0;
+}
#endif
-static int __devinit parport_EPP_supported(struct parport *pb) { return 0; }
-static int __devinit parport_ECPEPP_supported(struct parport *pb){return 0;}
-static int __devinit parport_ECPPS2_supported(struct parport *pb){return 0;}
+static int __devinit parport_EPP_supported(struct parport *pb)
+{
+ return 0;
+}
+
+static int __devinit parport_ECPEPP_supported(struct parport *pb)
+{
+ return 0;
+}
+
+static int __devinit parport_ECPPS2_supported(struct parport *pb)
+{
+ return 0;
+}
#endif /* No IEEE 1284 support */
@@ -2005,17 +2083,17 @@
static int programmable_irq_support(struct parport *pb)
{
int irq, intrLine;
- unsigned char oecr = inb (ECONTROL (pb));
+ unsigned char oecr = inb(ECONTROL(pb));
static const int lookup[8] = {
PARPORT_IRQ_NONE, 7, 9, 10, 11, 14, 15, 5
};
- ECR_WRITE (pb, ECR_CNF << 5); /* Configuration MODE */
+ ECR_WRITE(pb, ECR_CNF << 5); /* Configuration MODE */
- intrLine = (inb (CONFIGB (pb)) >> 3) & 0x07;
+ intrLine = (inb(CONFIGB(pb)) >> 3) & 0x07;
irq = lookup[intrLine];
- ECR_WRITE (pb, oecr);
+ ECR_WRITE(pb, oecr);
return irq;
}
@@ -2025,17 +2103,17 @@
unsigned long irqs;
irqs = probe_irq_on();
-
- ECR_WRITE (pb, ECR_SPP << 5); /* Reset FIFO */
- ECR_WRITE (pb, (ECR_TST << 5) | 0x04);
- ECR_WRITE (pb, ECR_TST << 5);
+
+ ECR_WRITE(pb, ECR_SPP << 5); /* Reset FIFO */
+ ECR_WRITE(pb, (ECR_TST << 5) | 0x04);
+ ECR_WRITE(pb, ECR_TST << 5);
/* If Full FIFO sure that writeIntrThreshold is generated */
- for (i=0; i < 1024 && !(inb (ECONTROL (pb)) & 0x02) ; i++)
- outb (0xaa, FIFO (pb));
-
+ for (i = 0; i < 1024 && !(inb(ECONTROL(pb)) & 0x02) ; i++)
+ outb(0xaa, FIFO(pb));
+
pb->irq = probe_irq_off(irqs);
- ECR_WRITE (pb, ECR_SPP << 5);
+ ECR_WRITE(pb, ECR_SPP << 5);
if (pb->irq <= 0)
pb->irq = PARPORT_IRQ_NONE;
@@ -2045,7 +2123,7 @@
/*
* This detection seems that only works in National Semiconductors
- * This doesn't work in SMC, LGS, and Winbond
+ * This doesn't work in SMC, LGS, and Winbond
*/
static int irq_probe_EPP(struct parport *pb)
{
@@ -2056,16 +2134,16 @@
unsigned char oecr;
if (pb->modes & PARPORT_MODE_PCECR)
- oecr = inb (ECONTROL (pb));
+ oecr = inb(ECONTROL(pb));
irqs = probe_irq_on();
if (pb->modes & PARPORT_MODE_PCECR)
- frob_econtrol (pb, 0x10, 0x10);
-
+ frob_econtrol(pb, 0x10, 0x10);
+
clear_epp_timeout(pb);
- parport_pc_frob_control (pb, 0x20, 0x20);
- parport_pc_frob_control (pb, 0x10, 0x10);
+ parport_pc_frob_control(pb, 0x20, 0x20);
+ parport_pc_frob_control(pb, 0x10, 0x10);
clear_epp_timeout(pb);
/* Device isn't expecting an EPP read
@@ -2074,9 +2152,9 @@
parport_pc_read_epp(pb);
udelay(20);
- pb->irq = probe_irq_off (irqs);
+ pb->irq = probe_irq_off(irqs);
if (pb->modes & PARPORT_MODE_PCECR)
- ECR_WRITE (pb, oecr);
+ ECR_WRITE(pb, oecr);
parport_pc_write_control(pb, 0xc);
if (pb->irq <= 0)
@@ -2133,28 +2211,28 @@
/* --- DMA detection -------------------------------------- */
/* Only if chipset conforms to ECP ISA Interface Standard */
-static int programmable_dma_support (struct parport *p)
+static int programmable_dma_support(struct parport *p)
{
- unsigned char oecr = inb (ECONTROL (p));
+ unsigned char oecr = inb(ECONTROL(p));
int dma;
- frob_set_mode (p, ECR_CNF);
-
- dma = inb (CONFIGB(p)) & 0x07;
+ frob_set_mode(p, ECR_CNF);
+
+ dma = inb(CONFIGB(p)) & 0x07;
/* 000: Indicates jumpered 8-bit DMA if read-only.
100: Indicates jumpered 16-bit DMA if read-only. */
if ((dma & 0x03) == 0)
dma = PARPORT_DMA_NONE;
- ECR_WRITE (p, oecr);
+ ECR_WRITE(p, oecr);
return dma;
}
-static int parport_dma_probe (struct parport *p)
+static int parport_dma_probe(struct parport *p)
{
const struct parport_pc_private *priv = p->private_data;
- if (priv->ecr)
- p->dma = programmable_dma_support(p); /* ask ECP chipset first */
+ if (priv->ecr) /* ask ECP chipset first */
+ p->dma = programmable_dma_support(p);
if (p->dma == PARPORT_DMA_NONE) {
/* ask known Super-IO chips proper, although these
claim ECP compatible, some don't report their DMA
@@ -2212,7 +2290,7 @@
if (!base_res)
goto out4;
- memcpy(ops, &parport_pc_ops, sizeof (struct parport_operations));
+ memcpy(ops, &parport_pc_ops, sizeof(struct parport_operations));
priv->ctr = 0xc;
priv->ctr_writable = ~0x10;
priv->ecr = 0;
@@ -2239,7 +2317,7 @@
if (!parport_EPP_supported(p))
parport_ECPEPP_supported(p);
}
- if (!parport_SPP_supported (p))
+ if (!parport_SPP_supported(p))
/* No port. */
goto out5;
if (priv->ecr)
@@ -2247,7 +2325,7 @@
else
parport_PS2_supported(p);
- p->size = (p->modes & PARPORT_MODE_EPP)?8:3;
+ p->size = (p->modes & PARPORT_MODE_EPP) ? 8 : 3;
printk(KERN_INFO "%s: PC-style at 0x%lx", p->name, p->base);
if (p->base_hi && priv->ecr)
@@ -2271,7 +2349,7 @@
}
}
if (p->dma == PARPORT_DMA_AUTO) /* To use DMA, giving the irq
- is mandatory (see above) */
+ is mandatory (see above) */
p->dma = PARPORT_DMA_NONE;
#ifdef CONFIG_PARPORT_PC_FIFO
@@ -2288,16 +2366,23 @@
if (p->dma != PARPORT_DMA_NONE) {
printk(", dma %d", p->dma);
p->modes |= PARPORT_MODE_DMA;
- }
- else printk(", using FIFO");
- }
- else
+ } else
+ printk(", using FIFO");
+ } else
/* We can't use the DMA channel after all. */
p->dma = PARPORT_DMA_NONE;
#endif /* Allowed to use FIFO/DMA */
printk(" [");
-#define printmode(x) {if(p->modes&PARPORT_MODE_##x){printk("%s%s",f?",":"",#x);f++;}}
+
+#define printmode(x) \
+ {\
+ if (p->modes & PARPORT_MODE_##x) {\
+ printk("%s%s", f ? "," : "", #x);\
+ f++;\
+ } \
+ }
+
{
int f = 0;
printmode(PCSPP);
@@ -2309,10 +2394,10 @@
}
#undef printmode
#ifndef CONFIG_PARPORT_1284
- printk ("(,...)");
+ printk("(,...)");
#endif /* CONFIG_PARPORT_1284 */
printk("]\n");
- if (probedirq != PARPORT_IRQ_NONE)
+ if (probedirq != PARPORT_IRQ_NONE)
printk(KERN_INFO "%s: irq %d detected\n", p->name, probedirq);
/* If No ECP release the ports grabbed above. */
@@ -2328,7 +2413,7 @@
if (p->irq != PARPORT_IRQ_NONE) {
if (request_irq(p->irq, parport_irq_handler,
irqflags, p->name, p)) {
- printk (KERN_WARNING "%s: irq %d in use, "
+ printk(KERN_WARNING "%s: irq %d in use, "
"resorting to polled operation\n",
p->name, p->irq);
p->irq = PARPORT_IRQ_NONE;
@@ -2338,8 +2423,8 @@
#ifdef CONFIG_PARPORT_PC_FIFO
#ifdef HAS_DMA
if (p->dma != PARPORT_DMA_NONE) {
- if (request_dma (p->dma, p->name)) {
- printk (KERN_WARNING "%s: dma %d in use, "
+ if (request_dma(p->dma, p->name)) {
+ printk(KERN_WARNING "%s: dma %d in use, "
"resorting to PIO operation\n",
p->name, p->dma);
p->dma = PARPORT_DMA_NONE;
@@ -2349,8 +2434,8 @@
PAGE_SIZE,
&priv->dma_handle,
GFP_KERNEL);
- if (! priv->dma_buf) {
- printk (KERN_WARNING "%s: "
+ if (!priv->dma_buf) {
+ printk(KERN_WARNING "%s: "
"cannot get buffer for DMA, "
"resorting to PIO operation\n",
p->name);
@@ -2369,10 +2454,10 @@
* Put the ECP detected port in PS2 mode.
* Do this also for ports that have ECR but don't do ECP.
*/
- ECR_WRITE (p, 0x34);
+ ECR_WRITE(p, 0x34);
parport_pc_write_data(p, 0);
- parport_pc_data_forward (p);
+ parport_pc_data_forward(p);
/* Now that we've told the sharing engine about the port, and
found out its characteristics, let the high-level drivers
@@ -2380,7 +2465,7 @@
spin_lock(&ports_lock);
list_add(&priv->list, &ports_list);
spin_unlock(&ports_lock);
- parport_announce_port (p);
+ parport_announce_port(p);
return p;
@@ -2393,18 +2478,17 @@
out4:
parport_put_port(p);
out3:
- kfree (priv);
+ kfree(priv);
out2:
- kfree (ops);
+ kfree(ops);
out1:
if (pdev)
platform_device_unregister(pdev);
return NULL;
}
+EXPORT_SYMBOL(parport_pc_probe_port);
-EXPORT_SYMBOL (parport_pc_probe_port);
-
-void parport_pc_unregister_port (struct parport *p)
+void parport_pc_unregister_port(struct parport *p)
{
struct parport_pc_private *priv = p->private_data;
struct parport_operations *ops = p->ops;
@@ -2430,17 +2514,16 @@
priv->dma_buf,
priv->dma_handle);
#endif
- kfree (p->private_data);
+ kfree(p->private_data);
parport_put_port(p);
- kfree (ops); /* hope no-one cached it */
+ kfree(ops); /* hope no-one cached it */
}
-
-EXPORT_SYMBOL (parport_pc_unregister_port);
+EXPORT_SYMBOL(parport_pc_unregister_port);
#ifdef CONFIG_PCI
/* ITE support maintained by Rich Liu <richliu@poorman.org> */
-static int __devinit sio_ite_8872_probe (struct pci_dev *pdev, int autoirq,
+static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq,
int autodma,
const struct parport_pc_via_data *via)
{
@@ -2452,73 +2535,74 @@
int irq;
int i;
- DPRINTK (KERN_DEBUG "sio_ite_8872_probe()\n");
-
- // make sure which one chip
- for(i = 0; i < 5; i++) {
+ DPRINTK(KERN_DEBUG "sio_ite_8872_probe()\n");
+
+ /* make sure which one chip */
+ for (i = 0; i < 5; i++) {
base_res = request_region(inta_addr[i], 32, "it887x");
if (base_res) {
int test;
- pci_write_config_dword (pdev, 0x60,
+ pci_write_config_dword(pdev, 0x60,
0xe5000000 | inta_addr[i]);
- pci_write_config_dword (pdev, 0x78,
+ pci_write_config_dword(pdev, 0x78,
0x00000000 | inta_addr[i]);
- test = inb (inta_addr[i]);
- if (test != 0xff) break;
+ test = inb(inta_addr[i]);
+ if (test != 0xff)
+ break;
release_region(inta_addr[i], 0x8);
}
}
- if(i >= 5) {
- printk (KERN_INFO "parport_pc: cannot find ITE8872 INTA\n");
+ if (i >= 5) {
+ printk(KERN_INFO "parport_pc: cannot find ITE8872 INTA\n");
return 0;
}
- type = inb (inta_addr[i] + 0x18);
+ type = inb(inta_addr[i] + 0x18);
type &= 0x0f;
switch (type) {
case 0x2:
- printk (KERN_INFO "parport_pc: ITE8871 found (1P)\n");
+ printk(KERN_INFO "parport_pc: ITE8871 found (1P)\n");
ite8872set = 0x64200000;
break;
case 0xa:
- printk (KERN_INFO "parport_pc: ITE8875 found (1P)\n");
+ printk(KERN_INFO "parport_pc: ITE8875 found (1P)\n");
ite8872set = 0x64200000;
break;
case 0xe:
- printk (KERN_INFO "parport_pc: ITE8872 found (2S1P)\n");
+ printk(KERN_INFO "parport_pc: ITE8872 found (2S1P)\n");
ite8872set = 0x64e00000;
break;
case 0x6:
- printk (KERN_INFO "parport_pc: ITE8873 found (1S)\n");
+ printk(KERN_INFO "parport_pc: ITE8873 found (1S)\n");
return 0;
case 0x8:
- DPRINTK (KERN_DEBUG "parport_pc: ITE8874 found (2S)\n");
+ DPRINTK(KERN_DEBUG "parport_pc: ITE8874 found (2S)\n");
return 0;
default:
- printk (KERN_INFO "parport_pc: unknown ITE887x\n");
- printk (KERN_INFO "parport_pc: please mail 'lspci -nvv' "
+ printk(KERN_INFO "parport_pc: unknown ITE887x\n");
+ printk(KERN_INFO "parport_pc: please mail 'lspci -nvv' "
"output to Rich.Liu@ite.com.tw\n");
return 0;
}
- pci_read_config_byte (pdev, 0x3c, &ite8872_irq);
- pci_read_config_dword (pdev, 0x1c, &ite8872_lpt);
+ pci_read_config_byte(pdev, 0x3c, &ite8872_irq);
+ pci_read_config_dword(pdev, 0x1c, &ite8872_lpt);
ite8872_lpt &= 0x0000ff00;
- pci_read_config_dword (pdev, 0x20, &ite8872_lpthi);
+ pci_read_config_dword(pdev, 0x20, &ite8872_lpthi);
ite8872_lpthi &= 0x0000ff00;
- pci_write_config_dword (pdev, 0x6c, 0xe3000000 | ite8872_lpt);
- pci_write_config_dword (pdev, 0x70, 0xe3000000 | ite8872_lpthi);
- pci_write_config_dword (pdev, 0x80, (ite8872_lpthi<<16) | ite8872_lpt);
- // SET SPP&EPP , Parallel Port NO DMA , Enable All Function
- // SET Parallel IRQ
- pci_write_config_dword (pdev, 0x9c,
+ pci_write_config_dword(pdev, 0x6c, 0xe3000000 | ite8872_lpt);
+ pci_write_config_dword(pdev, 0x70, 0xe3000000 | ite8872_lpthi);
+ pci_write_config_dword(pdev, 0x80, (ite8872_lpthi<<16) | ite8872_lpt);
+ /* SET SPP&EPP , Parallel Port NO DMA , Enable All Function */
+ /* SET Parallel IRQ */
+ pci_write_config_dword(pdev, 0x9c,
ite8872set | (ite8872_irq * 0x11111));
- DPRINTK (KERN_DEBUG "ITE887x: The IRQ is %d.\n", ite8872_irq);
- DPRINTK (KERN_DEBUG "ITE887x: The PARALLEL I/O port is 0x%x.\n",
+ DPRINTK(KERN_DEBUG "ITE887x: The IRQ is %d.\n", ite8872_irq);
+ DPRINTK(KERN_DEBUG "ITE887x: The PARALLEL I/O port is 0x%x.\n",
ite8872_lpt);
- DPRINTK (KERN_DEBUG "ITE887x: The PARALLEL I/O porthi is 0x%x.\n",
+ DPRINTK(KERN_DEBUG "ITE887x: The PARALLEL I/O porthi is 0x%x.\n",
ite8872_lpthi);
/* Let the user (or defaults) steer us away from interrupts */
@@ -2530,14 +2614,14 @@
* Release the resource so that parport_pc_probe_port can get it.
*/
release_resource(base_res);
- if (parport_pc_probe_port (ite8872_lpt, ite8872_lpthi,
+ if (parport_pc_probe_port(ite8872_lpt, ite8872_lpthi,
irq, PARPORT_DMA_NONE, &pdev->dev, 0)) {
- printk (KERN_INFO
+ printk(KERN_INFO
"parport_pc: ITE 8872 parallel port: io=0x%X",
- ite8872_lpt);
+ ite8872_lpt);
if (irq != PARPORT_IRQ_NONE)
- printk (", irq=%d", irq);
- printk ("\n");
+ printk(", irq=%d", irq);
+ printk("\n");
return 1;
}
@@ -2546,7 +2630,7 @@
/* VIA 8231 support by Pavel Fedin <sonic_amiga@rambler.ru>
based on VIA 686a support code by Jeff Garzik <jgarzik@pobox.com> */
-static int __devinitdata parport_init_mode = 0;
+static int __devinitdata parport_init_mode;
/* Data for two known VIA chips */
static struct parport_pc_via_data via_686a_data __devinitdata = {
@@ -2568,7 +2652,7 @@
0xF6
};
-static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq,
+static int __devinit sio_via_probe(struct pci_dev *pdev, int autoirq,
int autodma,
const struct parport_pc_via_data *via)
{
@@ -2580,38 +2664,38 @@
printk(KERN_DEBUG "parport_pc: VIA 686A/8231 detected\n");
- switch(parport_init_mode)
- {
+ switch (parport_init_mode) {
case 1:
- printk(KERN_DEBUG "parport_pc: setting SPP mode\n");
- siofunc = VIA_FUNCTION_PARPORT_SPP;
- break;
+ printk(KERN_DEBUG "parport_pc: setting SPP mode\n");
+ siofunc = VIA_FUNCTION_PARPORT_SPP;
+ break;
case 2:
- printk(KERN_DEBUG "parport_pc: setting PS/2 mode\n");
- siofunc = VIA_FUNCTION_PARPORT_SPP;
- ppcontrol = VIA_PARPORT_BIDIR;
- break;
+ printk(KERN_DEBUG "parport_pc: setting PS/2 mode\n");
+ siofunc = VIA_FUNCTION_PARPORT_SPP;
+ ppcontrol = VIA_PARPORT_BIDIR;
+ break;
case 3:
- printk(KERN_DEBUG "parport_pc: setting EPP mode\n");
- siofunc = VIA_FUNCTION_PARPORT_EPP;
- ppcontrol = VIA_PARPORT_BIDIR;
- have_epp = 1;
- break;
+ printk(KERN_DEBUG "parport_pc: setting EPP mode\n");
+ siofunc = VIA_FUNCTION_PARPORT_EPP;
+ ppcontrol = VIA_PARPORT_BIDIR;
+ have_epp = 1;
+ break;
case 4:
- printk(KERN_DEBUG "parport_pc: setting ECP mode\n");
- siofunc = VIA_FUNCTION_PARPORT_ECP;
- ppcontrol = VIA_PARPORT_BIDIR;
- break;
+ printk(KERN_DEBUG "parport_pc: setting ECP mode\n");
+ siofunc = VIA_FUNCTION_PARPORT_ECP;
+ ppcontrol = VIA_PARPORT_BIDIR;
+ break;
case 5:
- printk(KERN_DEBUG "parport_pc: setting EPP+ECP mode\n");
- siofunc = VIA_FUNCTION_PARPORT_ECP;
- ppcontrol = VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP;
- have_epp = 1;
- break;
- default:
- printk(KERN_DEBUG "parport_pc: probing current configuration\n");
- siofunc = VIA_FUNCTION_PROBE;
- break;
+ printk(KERN_DEBUG "parport_pc: setting EPP+ECP mode\n");
+ siofunc = VIA_FUNCTION_PARPORT_ECP;
+ ppcontrol = VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP;
+ have_epp = 1;
+ break;
+ default:
+ printk(KERN_DEBUG
+ "parport_pc: probing current configuration\n");
+ siofunc = VIA_FUNCTION_PROBE;
+ break;
}
/*
* unlock super i/o configuration
@@ -2622,38 +2706,36 @@
/* Bits 1-0: Parallel Port Mode / Enable */
outb(via->viacfg_function, VIA_CONFIG_INDEX);
- tmp = inb (VIA_CONFIG_DATA);
+ tmp = inb(VIA_CONFIG_DATA);
/* Bit 5: EPP+ECP enable; bit 7: PS/2 bidirectional port enable */
outb(via->viacfg_parport_control, VIA_CONFIG_INDEX);
- tmp2 = inb (VIA_CONFIG_DATA);
- if (siofunc == VIA_FUNCTION_PROBE)
- {
- siofunc = tmp & VIA_FUNCTION_PARPORT_DISABLE;
- ppcontrol = tmp2;
+ tmp2 = inb(VIA_CONFIG_DATA);
+ if (siofunc == VIA_FUNCTION_PROBE) {
+ siofunc = tmp & VIA_FUNCTION_PARPORT_DISABLE;
+ ppcontrol = tmp2;
+ } else {
+ tmp &= ~VIA_FUNCTION_PARPORT_DISABLE;
+ tmp |= siofunc;
+ outb(via->viacfg_function, VIA_CONFIG_INDEX);
+ outb(tmp, VIA_CONFIG_DATA);
+ tmp2 &= ~(VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP);
+ tmp2 |= ppcontrol;
+ outb(via->viacfg_parport_control, VIA_CONFIG_INDEX);
+ outb(tmp2, VIA_CONFIG_DATA);
}
- else
- {
- tmp &= ~VIA_FUNCTION_PARPORT_DISABLE;
- tmp |= siofunc;
- outb(via->viacfg_function, VIA_CONFIG_INDEX);
- outb(tmp, VIA_CONFIG_DATA);
- tmp2 &= ~(VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP);
- tmp2 |= ppcontrol;
- outb(via->viacfg_parport_control, VIA_CONFIG_INDEX);
- outb(tmp2, VIA_CONFIG_DATA);
- }
-
+
/* Parallel Port I/O Base Address, bits 9-2 */
outb(via->viacfg_parport_base, VIA_CONFIG_INDEX);
port1 = inb(VIA_CONFIG_DATA) << 2;
-
- printk (KERN_DEBUG "parport_pc: Current parallel port base: 0x%X\n",port1);
- if ((port1 == 0x3BC) && have_epp)
- {
- outb(via->viacfg_parport_base, VIA_CONFIG_INDEX);
- outb((0x378 >> 2), VIA_CONFIG_DATA);
- printk(KERN_DEBUG "parport_pc: Parallel port base changed to 0x378\n");
- port1 = 0x378;
+
+ printk(KERN_DEBUG "parport_pc: Current parallel port base: 0x%X\n",
+ port1);
+ if (port1 == 0x3BC && have_epp) {
+ outb(via->viacfg_parport_base, VIA_CONFIG_INDEX);
+ outb((0x378 >> 2), VIA_CONFIG_DATA);
+ printk(KERN_DEBUG
+ "parport_pc: Parallel port base changed to 0x378\n");
+ port1 = 0x378;
}
/*
@@ -2667,36 +2749,39 @@
printk(KERN_INFO "parport_pc: VIA parallel port disabled in BIOS\n");
return 0;
}
-
+
/* Bits 7-4: PnP Routing for Parallel Port IRQ */
pci_read_config_byte(pdev, via->via_pci_parport_irq_reg, &tmp);
irq = ((tmp & VIA_IRQCONTROL_PARALLEL) >> 4);
- if (siofunc == VIA_FUNCTION_PARPORT_ECP)
- {
- /* Bits 3-2: PnP Routing for Parallel Port DMA */
- pci_read_config_byte(pdev, via->via_pci_parport_dma_reg, &tmp);
- dma = ((tmp & VIA_DMACONTROL_PARALLEL) >> 2);
- }
- else
- /* if ECP not enabled, DMA is not enabled, assumed bogus 'dma' value */
- dma = PARPORT_DMA_NONE;
+ if (siofunc == VIA_FUNCTION_PARPORT_ECP) {
+ /* Bits 3-2: PnP Routing for Parallel Port DMA */
+ pci_read_config_byte(pdev, via->via_pci_parport_dma_reg, &tmp);
+ dma = ((tmp & VIA_DMACONTROL_PARALLEL) >> 2);
+ } else
+ /* if ECP not enabled, DMA is not enabled, assumed
+ bogus 'dma' value */
+ dma = PARPORT_DMA_NONE;
/* Let the user (or defaults) steer us away from interrupts and DMA */
if (autoirq == PARPORT_IRQ_NONE) {
- irq = PARPORT_IRQ_NONE;
- dma = PARPORT_DMA_NONE;
+ irq = PARPORT_IRQ_NONE;
+ dma = PARPORT_DMA_NONE;
}
if (autodma == PARPORT_DMA_NONE)
- dma = PARPORT_DMA_NONE;
+ dma = PARPORT_DMA_NONE;
switch (port1) {
- case 0x3bc: port2 = 0x7bc; break;
- case 0x378: port2 = 0x778; break;
- case 0x278: port2 = 0x678; break;
+ case 0x3bc:
+ port2 = 0x7bc; break;
+ case 0x378:
+ port2 = 0x778; break;
+ case 0x278:
+ port2 = 0x678; break;
default:
- printk(KERN_INFO "parport_pc: Weird VIA parport base 0x%X, ignoring\n",
- port1);
+ printk(KERN_INFO
+ "parport_pc: Weird VIA parport base 0x%X, ignoring\n",
+ port1);
return 0;
}
@@ -2714,17 +2799,17 @@
}
/* finally, do the probe with values obtained */
- if (parport_pc_probe_port (port1, port2, irq, dma, &pdev->dev, 0)) {
- printk (KERN_INFO
+ if (parport_pc_probe_port(port1, port2, irq, dma, &pdev->dev, 0)) {
+ printk(KERN_INFO
"parport_pc: VIA parallel port: io=0x%X", port1);
if (irq != PARPORT_IRQ_NONE)
- printk (", irq=%d", irq);
+ printk(", irq=%d", irq);
if (dma != PARPORT_DMA_NONE)
- printk (", dma=%d", dma);
- printk ("\n");
+ printk(", dma=%d", dma);
+ printk("\n");
return 1;
}
-
+
printk(KERN_WARNING "parport_pc: Strange, can't probe VIA parallel port: io=0x%X, irq=%d, dma=%d\n",
port1, irq, dma);
return 0;
@@ -2732,8 +2817,8 @@
enum parport_pc_sio_types {
- sio_via_686a = 0, /* Via VT82C686A motherboard Super I/O */
- sio_via_8231, /* Via VT8231 south bridge integrated Super IO */
+ sio_via_686a = 0, /* Via VT82C686A motherboard Super I/O */
+ sio_via_8231, /* Via VT8231 south bridge integrated Super IO */
sio_ite_8872,
last_sio
};
@@ -2804,15 +2889,15 @@
};
-/* each element directly indexed from enum list, above
+/* each element directly indexed from enum list, above
* (but offset by last_sio) */
static struct parport_pc_pci {
int numports;
struct { /* BAR (base address registers) numbers in the config
- space header */
+ space header */
int lo;
- int hi; /* -1 if not there, >6 for offset-method (max
- BAR is 6) */
+ int hi;
+ /* -1 if not there, >6 for offset-method (max BAR is 6) */
} addr[4];
/* If set, this is called immediately after pci_enable_device.
@@ -2857,7 +2942,7 @@
/* timedia_4018 */ { 2, { { 0, 1 }, { 2, 3 }, } },
/* timedia_9018a */ { 2, { { 0, 1 }, { 2, 3 }, } },
/* SYBA uses fixed offsets in
- a 1K io window */
+ a 1K io window */
/* syba_2p_epp AP138B */ { 2, { { 0, 0x078 }, { 0, 0x178 }, } },
/* syba_1p_ecp W83787 */ { 1, { { 0, 0x078 }, } },
/* titan_010l */ { 1, { { 3, -1 }, } },
@@ -2873,11 +2958,14 @@
/* oxsemi_pcie_pport */ { 1, { { 0, 1 }, } },
/* aks_0100 */ { 1, { { 0, -1 }, } },
/* mobility_pp */ { 1, { { 0, 1 }, } },
- /* netmos_9705 */ { 1, { { 0, -1 }, } }, /* untested */
- /* netmos_9715 */ { 2, { { 0, 1 }, { 2, 3 },} }, /* untested */
- /* netmos_9755 */ { 2, { { 0, 1 }, { 2, 3 },} }, /* untested */
- /* netmos_9805 */ { 1, { { 0, -1 }, } }, /* untested */
- /* netmos_9815 */ { 2, { { 0, -1 }, { 2, -1 }, } }, /* untested */
+
+ /* The netmos entries below are untested */
+ /* netmos_9705 */ { 1, { { 0, -1 }, } },
+ /* netmos_9715 */ { 2, { { 0, 1 }, { 2, 3 },} },
+ /* netmos_9755 */ { 2, { { 0, 1 }, { 2, 3 },} },
+ /* netmos_9805 */ { 1, { { 0, -1 }, } },
+ /* netmos_9815 */ { 2, { { 0, -1 }, { 2, -1 }, } },
+
/* quatech_sppxp100 */ { 1, { { 0, 1 }, } },
};
@@ -2906,7 +2994,7 @@
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_BOCA_IOPPAR,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, boca_ioppar },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
- PCI_SUBVENDOR_ID_EXSYS, PCI_SUBDEVICE_ID_EXSYS_4014, 0,0, plx_9050 },
+ PCI_SUBVENDOR_ID_EXSYS, PCI_SUBDEVICE_ID_EXSYS_4014, 0, 0, plx_9050 },
/* PCI_VENDOR_ID_TIMEDIA/SUNIX has many differing cards ...*/
{ 0x1409, 0x7168, 0x1409, 0x4078, 0, 0, timedia_4078a },
{ 0x1409, 0x7168, 0x1409, 0x4079, 0, 0, timedia_4079h },
@@ -2940,7 +3028,8 @@
{ 0x9710, 0x9805, 0x1000, 0x0010, 0, 0, titan_1284p1 },
{ 0x9710, 0x9815, 0x1000, 0x0020, 0, 0, titan_1284p2 },
/* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/
- { 0x14db, 0x2120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1p}, /* AFAVLAB_TK9902 */
+ /* AFAVLAB_TK9902 */
+ { 0x14db, 0x2120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1p},
{ 0x14db, 0x2121, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2p},
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952PP,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_952 },
@@ -2983,14 +3072,14 @@
PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 },
{ 0, } /* terminate list */
};
-MODULE_DEVICE_TABLE(pci,parport_pc_pci_tbl);
+MODULE_DEVICE_TABLE(pci, parport_pc_pci_tbl);
struct pci_parport_data {
int num;
struct parport *ports[2];
};
-static int parport_pc_pci_probe (struct pci_dev *dev,
+static int parport_pc_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
int err, count, n, i = id->driver_data;
@@ -3003,7 +3092,8 @@
/* This is a PCI card */
i -= last_sio;
count = 0;
- if ((err = pci_enable_device (dev)) != 0)
+ err = pci_enable_device(dev);
+ if (err)
return err;
data = kmalloc(sizeof(struct pci_parport_data), GFP_KERNEL);
@@ -3011,7 +3101,7 @@
return -ENOMEM;
if (cards[i].preinit_hook &&
- cards[i].preinit_hook (dev, PARPORT_IRQ_NONE, PARPORT_DMA_NONE)) {
+ cards[i].preinit_hook(dev, PARPORT_IRQ_NONE, PARPORT_DMA_NONE)) {
kfree(data);
return -ENODEV;
}
@@ -3021,25 +3111,25 @@
int hi = cards[i].addr[n].hi;
int irq;
unsigned long io_lo, io_hi;
- io_lo = pci_resource_start (dev, lo);
+ io_lo = pci_resource_start(dev, lo);
io_hi = 0;
if ((hi >= 0) && (hi <= 6))
- io_hi = pci_resource_start (dev, hi);
+ io_hi = pci_resource_start(dev, hi);
else if (hi > 6)
io_lo += hi; /* Reinterpret the meaning of
- "hi" as an offset (see SYBA
- def.) */
+ "hi" as an offset (see SYBA
+ def.) */
/* TODO: test if sharing interrupts works */
irq = dev->irq;
if (irq == IRQ_NONE) {
- printk (KERN_DEBUG
+ printk(KERN_DEBUG
"PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx)\n",
parport_pc_pci_tbl[i + last_sio].vendor,
parport_pc_pci_tbl[i + last_sio].device,
io_lo, io_hi);
irq = PARPORT_IRQ_NONE;
} else {
- printk (KERN_DEBUG
+ printk(KERN_DEBUG
"PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx), IRQ %d\n",
parport_pc_pci_tbl[i + last_sio].vendor,
parport_pc_pci_tbl[i + last_sio].device,
@@ -3056,7 +3146,7 @@
data->num = count;
if (cards[i].postinit_hook)
- cards[i].postinit_hook (dev, count == 0);
+ cards[i].postinit_hook(dev, count == 0);
if (count) {
pci_set_drvdata(dev, data);
@@ -3090,7 +3180,7 @@
.remove = __devexit_p(parport_pc_pci_remove),
};
-static int __init parport_pc_init_superio (int autoirq, int autodma)
+static int __init parport_pc_init_superio(int autoirq, int autodma)
{
const struct pci_device_id *id;
struct pci_dev *pdev = NULL;
@@ -3101,8 +3191,9 @@
if (id == NULL || id->driver_data >= last_sio)
continue;
- if (parport_pc_superio_info[id->driver_data].probe
- (pdev, autoirq, autodma,parport_pc_superio_info[id->driver_data].via)) {
+ if (parport_pc_superio_info[id->driver_data].probe(
+ pdev, autoirq, autodma,
+ parport_pc_superio_info[id->driver_data].via)) {
ret++;
}
}
@@ -3111,7 +3202,10 @@
}
#else
static struct pci_driver parport_pc_pci_driver;
-static int __init parport_pc_init_superio(int autoirq, int autodma) {return 0;}
+static int __init parport_pc_init_superio(int autoirq, int autodma)
+{
+ return 0;
+}
#endif /* CONFIG_PCI */
#ifdef CONFIG_PNP
@@ -3124,44 +3218,45 @@
{ }
};
-MODULE_DEVICE_TABLE(pnp,parport_pc_pnp_tbl);
+MODULE_DEVICE_TABLE(pnp, parport_pc_pnp_tbl);
-static int parport_pc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *id)
+static int parport_pc_pnp_probe(struct pnp_dev *dev,
+ const struct pnp_device_id *id)
{
struct parport *pdata;
unsigned long io_lo, io_hi;
int dma, irq;
- if (pnp_port_valid(dev,0) &&
- !(pnp_port_flags(dev,0) & IORESOURCE_DISABLED)) {
- io_lo = pnp_port_start(dev,0);
+ if (pnp_port_valid(dev, 0) &&
+ !(pnp_port_flags(dev, 0) & IORESOURCE_DISABLED)) {
+ io_lo = pnp_port_start(dev, 0);
} else
return -EINVAL;
- if (pnp_port_valid(dev,1) &&
- !(pnp_port_flags(dev,1) & IORESOURCE_DISABLED)) {
- io_hi = pnp_port_start(dev,1);
+ if (pnp_port_valid(dev, 1) &&
+ !(pnp_port_flags(dev, 1) & IORESOURCE_DISABLED)) {
+ io_hi = pnp_port_start(dev, 1);
} else
io_hi = 0;
- if (pnp_irq_valid(dev,0) &&
- !(pnp_irq_flags(dev,0) & IORESOURCE_DISABLED)) {
- irq = pnp_irq(dev,0);
+ if (pnp_irq_valid(dev, 0) &&
+ !(pnp_irq_flags(dev, 0) & IORESOURCE_DISABLED)) {
+ irq = pnp_irq(dev, 0);
} else
irq = PARPORT_IRQ_NONE;
- if (pnp_dma_valid(dev,0) &&
- !(pnp_dma_flags(dev,0) & IORESOURCE_DISABLED)) {
- dma = pnp_dma(dev,0);
+ if (pnp_dma_valid(dev, 0) &&
+ !(pnp_dma_flags(dev, 0) & IORESOURCE_DISABLED)) {
+ dma = pnp_dma(dev, 0);
} else
dma = PARPORT_DMA_NONE;
dev_info(&dev->dev, "reported by %s\n", dev->protocol->name);
- if (!(pdata = parport_pc_probe_port(io_lo, io_hi,
- irq, dma, &dev->dev, 0)))
+ pdata = parport_pc_probe_port(io_lo, io_hi, irq, dma, &dev->dev, 0);
+ if (pdata == NULL)
return -ENODEV;
- pnp_set_drvdata(dev,pdata);
+ pnp_set_drvdata(dev, pdata);
return 0;
}
@@ -3203,7 +3298,7 @@
/* This is called by parport_pc_find_nonpci_ports (in asm/parport.h) */
static int __devinit __attribute__((unused))
-parport_pc_find_isa_ports (int autoirq, int autodma)
+parport_pc_find_isa_ports(int autoirq, int autodma)
{
int count = 0;
@@ -3227,7 +3322,7 @@
* autoirq is PARPORT_IRQ_NONE, PARPORT_IRQ_AUTO, or PARPORT_IRQ_PROBEONLY
* autodma is PARPORT_DMA_NONE or PARPORT_DMA_AUTO
*/
-static void __init parport_pc_find_ports (int autoirq, int autodma)
+static void __init parport_pc_find_ports(int autoirq, int autodma)
{
int count = 0, err;
@@ -3261,11 +3356,18 @@
* syntax and keep in mind that code below is a cleaned up version.
*/
-static int __initdata io[PARPORT_PC_MAX_PORTS+1] = { [0 ... PARPORT_PC_MAX_PORTS] = 0 };
-static int __initdata io_hi[PARPORT_PC_MAX_PORTS+1] =
- { [0 ... PARPORT_PC_MAX_PORTS] = PARPORT_IOHI_AUTO };
-static int __initdata dmaval[PARPORT_PC_MAX_PORTS] = { [0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_DMA_NONE };
-static int __initdata irqval[PARPORT_PC_MAX_PORTS] = { [0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_IRQ_PROBEONLY };
+static int __initdata io[PARPORT_PC_MAX_PORTS+1] = {
+ [0 ... PARPORT_PC_MAX_PORTS] = 0
+};
+static int __initdata io_hi[PARPORT_PC_MAX_PORTS+1] = {
+ [0 ... PARPORT_PC_MAX_PORTS] = PARPORT_IOHI_AUTO
+};
+static int __initdata dmaval[PARPORT_PC_MAX_PORTS] = {
+ [0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_DMA_NONE
+};
+static int __initdata irqval[PARPORT_PC_MAX_PORTS] = {
+ [0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_IRQ_PROBEONLY
+};
static int __init parport_parse_param(const char *s, int *val,
int automatic, int none, int nofifo)
@@ -3306,18 +3408,19 @@
#ifdef CONFIG_PCI
static int __init parport_init_mode_setup(char *str)
{
- printk(KERN_DEBUG "parport_pc.c: Specified parameter parport_init_mode=%s\n", str);
+ printk(KERN_DEBUG
+ "parport_pc.c: Specified parameter parport_init_mode=%s\n", str);
- if (!strcmp (str, "spp"))
- parport_init_mode=1;
- if (!strcmp (str, "ps2"))
- parport_init_mode=2;
- if (!strcmp (str, "epp"))
- parport_init_mode=3;
- if (!strcmp (str, "ecp"))
- parport_init_mode=4;
- if (!strcmp (str, "ecpepp"))
- parport_init_mode=5;
+ if (!strcmp(str, "spp"))
+ parport_init_mode = 1;
+ if (!strcmp(str, "ps2"))
+ parport_init_mode = 2;
+ if (!strcmp(str, "epp"))
+ parport_init_mode = 3;
+ if (!strcmp(str, "ecp"))
+ parport_init_mode = 4;
+ if (!strcmp(str, "ecpepp"))
+ parport_init_mode = 5;
return 1;
}
#endif
@@ -3341,7 +3444,8 @@
#endif
#ifdef CONFIG_PCI
static char *init_mode;
-MODULE_PARM_DESC(init_mode, "Initialise mode for VIA VT8231 port (spp, ps2, epp, ecp or ecpepp)");
+MODULE_PARM_DESC(init_mode,
+ "Initialise mode for VIA VT8231 port (spp, ps2, epp, ecp or ecpepp)");
module_param(init_mode, charp, 0);
#endif
@@ -3372,7 +3476,7 @@
irqval[0] = val;
break;
default:
- printk (KERN_WARNING
+ printk(KERN_WARNING
"parport_pc: irq specified "
"without base address. Use 'io=' "
"to specify one\n");
@@ -3385,7 +3489,7 @@
dmaval[0] = val;
break;
default:
- printk (KERN_WARNING
+ printk(KERN_WARNING
"parport_pc: dma specified "
"without base address. Use 'io=' "
"to specify one\n");
@@ -3396,7 +3500,7 @@
#else
-static int parport_setup_ptr __initdata = 0;
+static int parport_setup_ptr __initdata;
/*
* Acceptable parameters:
@@ -3407,7 +3511,7 @@
*
* IRQ/DMA may be numeric or 'auto' or 'none'
*/
-static int __init parport_setup (char *str)
+static int __init parport_setup(char *str)
{
char *endptr;
char *sep;
@@ -3419,15 +3523,15 @@
return 1;
}
- if (!strncmp (str, "auto", 4)) {
+ if (!strncmp(str, "auto", 4)) {
irqval[0] = PARPORT_IRQ_AUTO;
dmaval[0] = PARPORT_DMA_AUTO;
return 1;
}
- val = simple_strtoul (str, &endptr, 0);
+ val = simple_strtoul(str, &endptr, 0);
if (endptr == str) {
- printk (KERN_WARNING "parport=%s not understood\n", str);
+ printk(KERN_WARNING "parport=%s not understood\n", str);
return 1;
}
@@ -3461,7 +3565,7 @@
return io[0] == PARPORT_DISABLE;
}
-__setup ("parport=", parport_setup);
+__setup("parport=", parport_setup);
/*
* Acceptable parameters:
@@ -3469,7 +3573,7 @@
* parport_init_mode=[spp|ps2|epp|ecp|ecpepp]
*/
#ifdef CONFIG_PCI
-__setup("parport_init_mode=",parport_init_mode_setup);
+__setup("parport_init_mode=", parport_init_mode_setup);
#endif
#endif
@@ -3493,13 +3597,13 @@
for (i = 0; i < PARPORT_PC_MAX_PORTS; i++) {
if (!io[i])
break;
- if ((io_hi[i]) == PARPORT_IOHI_AUTO)
- io_hi[i] = 0x400 + io[i];
+ if (io_hi[i] == PARPORT_IOHI_AUTO)
+ io_hi[i] = 0x400 + io[i];
parport_pc_probe_port(io[i], io_hi[i],
- irqval[i], dmaval[i], NULL, 0);
+ irqval[i], dmaval[i], NULL, 0);
}
} else
- parport_pc_find_ports (irqval[0], dmaval[0]);
+ parport_pc_find_ports(irqval[0], dmaval[0]);
return 0;
}
@@ -3507,9 +3611,9 @@
static void __exit parport_pc_exit(void)
{
if (pci_registered_parport)
- pci_unregister_driver (&parport_pc_pci_driver);
+ pci_unregister_driver(&parport_pc_pci_driver);
if (pnp_registered_parport)
- pnp_unregister_driver (&parport_pc_pnp_driver);
+ pnp_unregister_driver(&parport_pc_pnp_driver);
platform_driver_unregister(&parport_pc_platform_driver);
while (!list_empty(&ports_list)) {
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index a0127e9..fb867a9 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -287,6 +287,13 @@
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
.flags = UART_CAP_FIFO,
},
+ [PORT_AR7] = {
+ .name = "AR7",
+ .fifo_size = 16,
+ .tx_loadsz = 16,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
};
#if defined (CONFIG_SERIAL_8250_AU1X00)
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 938bc1b..e371a9c 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -2776,6 +2776,9 @@
{ PCI_VENDOR_ID_OXSEMI, 0x950a,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_2_1130000 },
+ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_C950,
+ PCI_VENDOR_ID_OXSEMI, PCI_SUBDEVICE_ID_OXSEMI_C950, 0, 0,
+ pbn_b0_1_921600 },
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_4_115200 },
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 343e3a3..641e800 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -833,6 +833,7 @@
bool "IMX serial port support"
depends on ARM && (ARCH_IMX || ARCH_MXC)
select SERIAL_CORE
+ select RATIONAL
help
If you have a machine based on a Motorola IMX CPU you
can enable its onboard serial port by enabling this option.
@@ -1433,4 +1434,11 @@
default 19200 if (SERIAL_SPORT_BAUD_RATE_19200)
default 9600 if (SERIAL_SPORT_BAUD_RATE_9600)
+config SERIAL_TIMBERDALE
+ tristate "Support for timberdale UART"
+ depends on MFD_TIMBERDALE
+ select SERIAL_CORE
+ ---help---
+ Add support for UART controller on timberdale.
+
endmenu
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index d438eb2..45a8658 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -77,3 +77,4 @@
obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
+obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index d86123e..e2f6b1b 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -330,6 +330,11 @@
/* Clear TFI bit */
UART_PUT_LSR(uart, TFI);
#endif
+ /* Anomaly notes:
+ * 05000215 - we always clear ETBEI within last UART TX
+ * interrupt to end a string. It is always set
+ * when start a new tx.
+ */
UART_CLEAR_IER(uart, ETBEI);
return;
}
@@ -415,6 +420,7 @@
set_dma_start_addr(uart->tx_dma_channel, (unsigned long)(xmit->buf+xmit->tail));
set_dma_x_count(uart->tx_dma_channel, uart->tx_count);
set_dma_x_modify(uart->tx_dma_channel, 1);
+ SSYNC();
enable_dma(uart->tx_dma_channel);
UART_SET_IER(uart, ETBEI);
@@ -473,27 +479,41 @@
void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
{
int x_pos, pos;
- unsigned long flags;
- spin_lock_irqsave(&uart->port.lock, flags);
+ dma_disable_irq(uart->rx_dma_channel);
+ spin_lock_bh(&uart->port.lock);
+ /* 2D DMA RX buffer ring is used. Because curr_y_count and
+ * curr_x_count can't be read as an atomic operation,
+ * curr_y_count should be read before curr_x_count. When
+ * curr_x_count is read, curr_y_count may already indicate
+ * next buffer line. But, the position calculated here is
+ * still indicate the old line. The wrong position data may
+ * be smaller than current buffer tail, which cause garbages
+ * are received if it is not prohibit.
+ */
uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel);
x_pos = get_dma_curr_xcount(uart->rx_dma_channel);
uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows;
- if (uart->rx_dma_nrows == DMA_RX_YCOUNT)
+ if (uart->rx_dma_nrows == DMA_RX_YCOUNT || x_pos == 0)
uart->rx_dma_nrows = 0;
x_pos = DMA_RX_XCOUNT - x_pos;
if (x_pos == DMA_RX_XCOUNT)
x_pos = 0;
pos = uart->rx_dma_nrows * DMA_RX_XCOUNT + x_pos;
- if (pos != uart->rx_dma_buf.tail) {
+ /* Ignore receiving data if new position is in the same line of
+ * current buffer tail and small.
+ */
+ if (pos > uart->rx_dma_buf.tail ||
+ uart->rx_dma_nrows < (uart->rx_dma_buf.tail/DMA_RX_XCOUNT)) {
uart->rx_dma_buf.head = pos;
bfin_serial_dma_rx_chars(uart);
uart->rx_dma_buf.tail = uart->rx_dma_buf.head;
}
- spin_unlock_irqrestore(&uart->port.lock, flags);
+ spin_unlock_bh(&uart->port.lock);
+ dma_enable_irq(uart->rx_dma_channel);
mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES);
}
@@ -514,6 +534,11 @@
if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) {
disable_dma(uart->tx_dma_channel);
clear_dma_irqstat(uart->tx_dma_channel);
+ /* Anomaly notes:
+ * 05000215 - we always clear ETBEI within last UART TX
+ * interrupt to end a string. It is always set
+ * when start a new tx.
+ */
UART_CLEAR_IER(uart, ETBEI);
xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1);
uart->port.icount.tx += uart->tx_count;
@@ -532,11 +557,26 @@
{
struct bfin_serial_port *uart = dev_id;
unsigned short irqstat;
+ int x_pos, pos;
spin_lock(&uart->port.lock);
irqstat = get_dma_curr_irqstat(uart->rx_dma_channel);
clear_dma_irqstat(uart->rx_dma_channel);
- bfin_serial_dma_rx_chars(uart);
+
+ uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel);
+ x_pos = get_dma_curr_xcount(uart->rx_dma_channel);
+ uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows;
+ if (uart->rx_dma_nrows == DMA_RX_YCOUNT || x_pos == 0)
+ uart->rx_dma_nrows = 0;
+
+ pos = uart->rx_dma_nrows * DMA_RX_XCOUNT;
+ if (pos > uart->rx_dma_buf.tail ||
+ uart->rx_dma_nrows < (uart->rx_dma_buf.tail/DMA_RX_XCOUNT)) {
+ uart->rx_dma_buf.head = pos;
+ bfin_serial_dma_rx_chars(uart);
+ uart->rx_dma_buf.tail = uart->rx_dma_buf.head;
+ }
+
spin_unlock(&uart->port.lock);
return IRQ_HANDLED;
@@ -789,8 +829,16 @@
__func__);
}
- if (termios->c_cflag & CSTOPB)
- lcr |= STB;
+ /* Anomaly notes:
+ * 05000231 - STOP bit is always set to 1 whatever the user is set.
+ */
+ if (termios->c_cflag & CSTOPB) {
+ if (ANOMALY_05000231)
+ printk(KERN_WARNING "STOP bits other than 1 is not "
+ "supported in case of anomaly 05000231.\n");
+ else
+ lcr |= STB;
+ }
if (termios->c_cflag & PARENB)
lcr |= PEN;
if (!(termios->c_cflag & PARODD))
@@ -940,6 +988,10 @@
}
#ifdef CONFIG_CONSOLE_POLL
+/* Anomaly notes:
+ * 05000099 - Because we only use THRE in poll_put and DR in poll_get,
+ * losing other bits of UART_LSR is not a problem here.
+ */
static void bfin_serial_poll_put_char(struct uart_port *port, unsigned char chr)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
@@ -1245,12 +1297,17 @@
}
}
+/*
+ * This should have a .setup or .early_setup in it, but then things get called
+ * without the command line options, and the baud rate gets messed up - so
+ * don't let the common infrastructure play with things. (see calls to setup
+ * & earlysetup in ./kernel/printk.c:register_console()
+ */
static struct __initdata console bfin_early_serial_console = {
.name = "early_BFuart",
.write = early_serial_write,
.device = uart_console_device,
.flags = CON_PRINTBUFFER,
- .setup = bfin_serial_console_setup,
.index = -1,
.data = &bfin_serial_reg,
};
diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c
index 529c0ff..34b4ae0 100644
--- a/drivers/serial/bfin_sport_uart.c
+++ b/drivers/serial/bfin_sport_uart.c
@@ -101,15 +101,16 @@
{
pr_debug("%s value:%x\n", __func__, value);
/* Place a Start and Stop bit */
- __asm__ volatile (
- "R2 = b#01111111100;\n\t"
- "R3 = b#10000000001;\n\t"
- "%0 <<= 2;\n\t"
- "%0 = %0 & R2;\n\t"
- "%0 = %0 | R3;\n\t"
- :"=r"(value)
- :"0"(value)
- :"R2", "R3");
+ __asm__ __volatile__ (
+ "R2 = b#01111111100;"
+ "R3 = b#10000000001;"
+ "%0 <<= 2;"
+ "%0 = %0 & R2;"
+ "%0 = %0 | R3;"
+ : "=d"(value)
+ : "d"(value)
+ : "ASTAT", "R2", "R3"
+ );
pr_debug("%s value:%x\n", __func__, value);
SPORT_PUT_TX(up, value);
@@ -118,27 +119,30 @@
static inline unsigned int rx_one_byte(struct sport_uart_port *up)
{
unsigned int value, extract;
+ u32 tmp_mask1, tmp_mask2, tmp_shift, tmp;
value = SPORT_GET_RX32(up);
pr_debug("%s value:%x\n", __func__, value);
/* Extract 8 bits data */
- __asm__ volatile (
- "R5 = 0;\n\t"
- "P0 = 8;\n\t"
- "R1 = 0x1801(Z);\n\t"
- "R3 = 0x0300(Z);\n\t"
- "R4 = 0;\n\t"
- "LSETUP(loop_s, loop_e) LC0 = P0;\nloop_s:\t"
- "R2 = extract(%1, R1.L)(Z);\n\t"
- "R2 <<= R4;\n\t"
- "R5 = R5 | R2;\n\t"
- "R1 = R1 - R3;\nloop_e:\t"
- "R4 += 1;\n\t"
- "%0 = R5;\n\t"
- :"=r"(extract)
- :"r"(value)
- :"P0", "R1", "R2","R3","R4", "R5");
+ __asm__ __volatile__ (
+ "%[extr] = 0;"
+ "%[mask1] = 0x1801(Z);"
+ "%[mask2] = 0x0300(Z);"
+ "%[shift] = 0;"
+ "LSETUP(.Lloop_s, .Lloop_e) LC0 = %[lc];"
+ ".Lloop_s:"
+ "%[tmp] = extract(%[val], %[mask1].L)(Z);"
+ "%[tmp] <<= %[shift];"
+ "%[extr] = %[extr] | %[tmp];"
+ "%[mask1] = %[mask1] - %[mask2];"
+ ".Lloop_e:"
+ "%[shift] += 1;"
+ : [val]"=d"(value), [extr]"=d"(extract), [shift]"=d"(tmp_shift), [tmp]"=d"(tmp),
+ [mask1]"=d"(tmp_mask1), [mask2]"=d"(tmp_mask2)
+ : "d"(value), [lc]"a"(8)
+ : "ASTAT", "LB0", "LC0", "LT0"
+ );
pr_debug(" extract:%x\n", extract);
return extract;
@@ -149,7 +153,7 @@
int tclkdiv, tfsdiv, rclkdiv;
/* Set TCR1 and TCR2 */
- SPORT_PUT_TCR1(up, (LTFS | ITFS | TFSR | TLSBIT | ITCLK));
+ SPORT_PUT_TCR1(up, (LATFS | ITFS | TFSR | TLSBIT | ITCLK));
SPORT_PUT_TCR2(up, 10);
pr_debug("%s TCR1:%x, TCR2:%x\n", __func__, SPORT_GET_TCR1(up), SPORT_GET_TCR2(up));
@@ -419,7 +423,7 @@
}
static void sport_set_termios(struct uart_port *port,
- struct termios *termios, struct termios *old)
+ struct ktermios *termios, struct ktermios *old)
{
pr_debug("%s enter, c_cflag:%08x\n", __func__, termios->c_cflag);
uart_update_timeout(port, CS8 ,port->uartclk);
diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c
index a461b3b..9f2891c 100644
--- a/drivers/serial/icom.c
+++ b/drivers/serial/icom.c
@@ -137,7 +137,12 @@
static spinlock_t icom_lock;
#ifdef ICOM_TRACE
-static inline void trace(struct icom_port *, char *, unsigned long) {};
+static inline void trace(struct icom_port *icom_port, char *trace_pt,
+ unsigned long trace_data)
+{
+ dev_info(&icom_port->adapter->pci_dev->dev, ":%d:%s - %lx\n",
+ icom_port->port, trace_pt, trace_data);
+}
#else
static inline void trace(struct icom_port *icom_port, char *trace_pt, unsigned long trace_data) {};
#endif
@@ -408,7 +413,7 @@
release_firmware(fw);
/* Set Hardware level */
- if ((icom_port->adapter->version | ADAPTER_V2) == ADAPTER_V2)
+ if (icom_port->adapter->version == ADAPTER_V2)
writeb(V2_HARDWARE, &(icom_port->dram->misc_flags));
/* Start the processor in Adapter */
@@ -861,7 +866,7 @@
/* find icom_port for this interrupt */
icom_adapter = (struct icom_adapter *) dev_id;
- if ((icom_adapter->version | ADAPTER_V2) == ADAPTER_V2) {
+ if (icom_adapter->version == ADAPTER_V2) {
int_reg = icom_adapter->base_addr + 0x8024;
adapter_interrupts = readl(int_reg);
@@ -1647,15 +1652,6 @@
module_init(icom_init);
module_exit(icom_exit);
-#ifdef ICOM_TRACE
-static inline void trace(struct icom_port *icom_port, char *trace_pt,
- unsigned long trace_data)
-{
- dev_info(&icom_port->adapter->pci_dev->dev, ":%d:%s - %lx\n",
- icom_port->port, trace_pt, trace_data);
-}
-#endif
-
MODULE_AUTHOR("Michael Anderson <mjanders@us.ibm.com>");
MODULE_DESCRIPTION("IBM iSeries Serial IOA driver");
MODULE_SUPPORTED_DEVICE
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 5f0be40..7b5d1de 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -8,6 +8,9 @@
* Author: Sascha Hauer <sascha@saschahauer.de>
* Copyright (C) 2004 Pengutronix
*
+ * Copyright (C) 2009 emlix GmbH
+ * Author: Fabian Godehardt (added IrDA support for iMX)
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -41,6 +44,8 @@
#include <linux/serial_core.h>
#include <linux/serial.h>
#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/rational.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -148,6 +153,7 @@
#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */
#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */
#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */
+#define UFCR_RFDIV_REG(x) (((x) < 7 ? 6 - (x) : 6) << 7)
#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */
#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */
#define USR1_RTSS (1<<14) /* RTS pin status */
@@ -211,10 +217,20 @@
struct timer_list timer;
unsigned int old_status;
int txirq,rxirq,rtsirq;
- int have_rtscts:1;
+ unsigned int have_rtscts:1;
+ unsigned int use_irda:1;
+ unsigned int irda_inv_rx:1;
+ unsigned int irda_inv_tx:1;
+ unsigned short trcv_delay; /* transceiver delay */
struct clk *clk;
};
+#ifdef CONFIG_IRDA
+#define USE_IRDA(sport) ((sport)->use_irda)
+#else
+#define USE_IRDA(sport) (0)
+#endif
+
/*
* Handle any change of modem status signal since we were last called.
*/
@@ -268,6 +284,48 @@
struct imx_port *sport = (struct imx_port *)port;
unsigned long temp;
+ if (USE_IRDA(sport)) {
+ /* half duplex - wait for end of transmission */
+ int n = 256;
+ while ((--n > 0) &&
+ !(readl(sport->port.membase + USR2) & USR2_TXDC)) {
+ udelay(5);
+ barrier();
+ }
+ /*
+ * irda transceiver - wait a bit more to avoid
+ * cutoff, hardware dependent
+ */
+ udelay(sport->trcv_delay);
+
+ /*
+ * half duplex - reactivate receive mode,
+ * flush receive pipe echo crap
+ */
+ if (readl(sport->port.membase + USR2) & USR2_TXDC) {
+ temp = readl(sport->port.membase + UCR1);
+ temp &= ~(UCR1_TXMPTYEN | UCR1_TRDYEN);
+ writel(temp, sport->port.membase + UCR1);
+
+ temp = readl(sport->port.membase + UCR4);
+ temp &= ~(UCR4_TCEN);
+ writel(temp, sport->port.membase + UCR4);
+
+ while (readl(sport->port.membase + URXD0) &
+ URXD_CHARRDY)
+ barrier();
+
+ temp = readl(sport->port.membase + UCR1);
+ temp |= UCR1_RRDYEN;
+ writel(temp, sport->port.membase + UCR1);
+
+ temp = readl(sport->port.membase + UCR4);
+ temp |= UCR4_DREN;
+ writel(temp, sport->port.membase + UCR4);
+ }
+ return;
+ }
+
temp = readl(sport->port.membase + UCR1);
writel(temp & ~UCR1_TXMPTYEN, sport->port.membase + UCR1);
}
@@ -302,13 +360,15 @@
/* send xmit->buf[xmit->tail]
* out the port here */
writel(xmit->buf[xmit->tail], sport->port.membase + URTX0);
- xmit->tail = (xmit->tail + 1) &
- (UART_XMIT_SIZE - 1);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
sport->port.icount.tx++;
if (uart_circ_empty(xmit))
break;
}
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&sport->port);
+
if (uart_circ_empty(xmit))
imx_stop_tx(&sport->port);
}
@@ -321,9 +381,30 @@
struct imx_port *sport = (struct imx_port *)port;
unsigned long temp;
+ if (USE_IRDA(sport)) {
+ /* half duplex in IrDA mode; have to disable receive mode */
+ temp = readl(sport->port.membase + UCR4);
+ temp &= ~(UCR4_DREN);
+ writel(temp, sport->port.membase + UCR4);
+
+ temp = readl(sport->port.membase + UCR1);
+ temp &= ~(UCR1_RRDYEN);
+ writel(temp, sport->port.membase + UCR1);
+ }
+
temp = readl(sport->port.membase + UCR1);
writel(temp | UCR1_TXMPTYEN, sport->port.membase + UCR1);
+ if (USE_IRDA(sport)) {
+ temp = readl(sport->port.membase + UCR1);
+ temp |= UCR1_TRDYEN;
+ writel(temp, sport->port.membase + UCR1);
+
+ temp = readl(sport->port.membase + UCR4);
+ temp |= UCR4_TCEN;
+ writel(temp, sport->port.membase + UCR4);
+ }
+
if (readl(sport->port.membase + UTS) & UTS_TXEMPTY)
imx_transmit_buffer(sport);
}
@@ -395,8 +476,7 @@
continue;
}
- if (uart_handle_sysrq_char
- (&sport->port, (unsigned char)rx))
+ if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx))
continue;
if (rx & (URXD_PRERR | URXD_OVRRUN | URXD_FRMERR) ) {
@@ -471,26 +551,26 @@
*/
static unsigned int imx_get_mctrl(struct uart_port *port)
{
- struct imx_port *sport = (struct imx_port *)port;
- unsigned int tmp = TIOCM_DSR | TIOCM_CAR;
+ struct imx_port *sport = (struct imx_port *)port;
+ unsigned int tmp = TIOCM_DSR | TIOCM_CAR;
- if (readl(sport->port.membase + USR1) & USR1_RTSS)
- tmp |= TIOCM_CTS;
+ if (readl(sport->port.membase + USR1) & USR1_RTSS)
+ tmp |= TIOCM_CTS;
- if (readl(sport->port.membase + UCR2) & UCR2_CTS)
- tmp |= TIOCM_RTS;
+ if (readl(sport->port.membase + UCR2) & UCR2_CTS)
+ tmp |= TIOCM_RTS;
- return tmp;
+ return tmp;
}
static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
- struct imx_port *sport = (struct imx_port *)port;
+ struct imx_port *sport = (struct imx_port *)port;
unsigned long temp;
temp = readl(sport->port.membase + UCR2) & ~UCR2_CTS;
- if (mctrl & TIOCM_RTS)
+ if (mctrl & TIOCM_RTS)
temp |= UCR2_CTS;
writel(temp, sport->port.membase + UCR2);
@@ -534,12 +614,7 @@
if(!ufcr_rfdiv)
ufcr_rfdiv = 1;
- if(ufcr_rfdiv >= 7)
- ufcr_rfdiv = 6;
- else
- ufcr_rfdiv = 6 - ufcr_rfdiv;
-
- val |= UFCR_RFDIV & (ufcr_rfdiv << 7);
+ val |= UFCR_RFDIV_REG(ufcr_rfdiv);
writel(val, sport->port.membase + UFCR);
@@ -558,8 +633,24 @@
* requesting IRQs
*/
temp = readl(sport->port.membase + UCR4);
+
+ if (USE_IRDA(sport))
+ temp |= UCR4_IRSC;
+
writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
+ if (USE_IRDA(sport)) {
+ /* reset fifo's and state machines */
+ int i = 100;
+ temp = readl(sport->port.membase + UCR2);
+ temp &= ~UCR2_SRST;
+ writel(temp, sport->port.membase + UCR2);
+ while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) &&
+ (--i > 0)) {
+ udelay(1);
+ }
+ }
+
/*
* Allocate the IRQ(s) i.MX1 has three interrupts whereas later
* chips only have one interrupt.
@@ -575,12 +666,16 @@
if (retval)
goto error_out2;
- retval = request_irq(sport->rtsirq, imx_rtsint,
- (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 :
- IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
- DRIVER_NAME, sport);
- if (retval)
- goto error_out3;
+ /* do not use RTS IRQ on IrDA */
+ if (!USE_IRDA(sport)) {
+ retval = request_irq(sport->rtsirq, imx_rtsint,
+ (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 :
+ IRQF_TRIGGER_FALLING |
+ IRQF_TRIGGER_RISING,
+ DRIVER_NAME, sport);
+ if (retval)
+ goto error_out3;
+ }
} else {
retval = request_irq(sport->port.irq, imx_int, 0,
DRIVER_NAME, sport);
@@ -597,18 +692,49 @@
temp = readl(sport->port.membase + UCR1);
temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN;
+
+ if (USE_IRDA(sport)) {
+ temp |= UCR1_IREN;
+ temp &= ~(UCR1_RTSDEN);
+ }
+
writel(temp, sport->port.membase + UCR1);
temp = readl(sport->port.membase + UCR2);
temp |= (UCR2_RXEN | UCR2_TXEN);
writel(temp, sport->port.membase + UCR2);
+ if (USE_IRDA(sport)) {
+ /* clear RX-FIFO */
+ int i = 64;
+ while ((--i > 0) &&
+ (readl(sport->port.membase + URXD0) & URXD_CHARRDY)) {
+ barrier();
+ }
+ }
+
#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
temp = readl(sport->port.membase + UCR3);
temp |= UCR3_RXDMUXSEL;
writel(temp, sport->port.membase + UCR3);
#endif
+ if (USE_IRDA(sport)) {
+ temp = readl(sport->port.membase + UCR4);
+ if (sport->irda_inv_rx)
+ temp |= UCR4_INVR;
+ else
+ temp &= ~(UCR4_INVR);
+ writel(temp | UCR4_DREN, sport->port.membase + UCR4);
+
+ temp = readl(sport->port.membase + UCR3);
+ if (sport->irda_inv_tx)
+ temp |= UCR3_INVT;
+ else
+ temp &= ~(UCR3_INVT);
+ writel(temp, sport->port.membase + UCR3);
+ }
+
/*
* Enable modem status interrupts
*/
@@ -616,6 +742,16 @@
imx_enable_ms(&sport->port);
spin_unlock_irqrestore(&sport->port.lock,flags);
+ if (USE_IRDA(sport)) {
+ struct imxuart_platform_data *pdata;
+ pdata = sport->port.dev->platform_data;
+ sport->irda_inv_rx = pdata->irda_inv_rx;
+ sport->irda_inv_tx = pdata->irda_inv_tx;
+ sport->trcv_delay = pdata->transceiver_delay;
+ if (pdata->irda_enable)
+ pdata->irda_enable(1);
+ }
+
return 0;
error_out3:
@@ -633,6 +769,17 @@
struct imx_port *sport = (struct imx_port *)port;
unsigned long temp;
+ temp = readl(sport->port.membase + UCR2);
+ temp &= ~(UCR2_TXEN);
+ writel(temp, sport->port.membase + UCR2);
+
+ if (USE_IRDA(sport)) {
+ struct imxuart_platform_data *pdata;
+ pdata = sport->port.dev->platform_data;
+ if (pdata->irda_enable)
+ pdata->irda_enable(0);
+ }
+
/*
* Stop our timer.
*/
@@ -642,7 +789,8 @@
* Free the interrupts
*/
if (sport->txirq > 0) {
- free_irq(sport->rtsirq, sport);
+ if (!USE_IRDA(sport))
+ free_irq(sport->rtsirq, sport);
free_irq(sport->txirq, sport);
free_irq(sport->rxirq, sport);
} else
@@ -654,6 +802,9 @@
temp = readl(sport->port.membase + UCR1);
temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
+ if (USE_IRDA(sport))
+ temp &= ~(UCR1_IREN);
+
writel(temp, sport->port.membase + UCR1);
}
@@ -665,7 +816,9 @@
unsigned long flags;
unsigned int ucr2, old_ucr1, old_txrxen, baud, quot;
unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
- unsigned int div, num, denom, ufcr;
+ unsigned int div, ufcr;
+ unsigned long num, denom;
+ uint64_t tdiv64;
/*
* If we don't support modem control lines, don't allow
@@ -761,38 +914,39 @@
sport->port.membase + UCR2);
old_txrxen &= (UCR2_TXEN | UCR2_RXEN);
- div = sport->port.uartclk / (baud * 16);
- if (div > 7)
- div = 7;
- if (!div)
+ if (USE_IRDA(sport)) {
+ /*
+ * use maximum available submodule frequency to
+ * avoid missing short pulses due to low sampling rate
+ */
div = 1;
-
- num = baud;
- denom = port->uartclk / div / 16;
-
- /* shift num and denom right until they fit into 16 bits */
- while (num > 0x10000 || denom > 0x10000) {
- num >>= 1;
- denom >>= 1;
+ } else {
+ div = sport->port.uartclk / (baud * 16);
+ if (div > 7)
+ div = 7;
+ if (!div)
+ div = 1;
}
- if (num > 0)
- num -= 1;
- if (denom > 0)
- denom -= 1;
+
+ rational_best_approximation(16 * div * baud, sport->port.uartclk,
+ 1 << 16, 1 << 16, &num, &denom);
+
+ tdiv64 = sport->port.uartclk;
+ tdiv64 *= num;
+ do_div(tdiv64, denom * 16 * div);
+ tty_encode_baud_rate(sport->port.info->port.tty,
+ (speed_t)tdiv64, (speed_t)tdiv64);
+
+ num -= 1;
+ denom -= 1;
+
+ ufcr = readl(sport->port.membase + UFCR);
+ ufcr = (ufcr & (~UFCR_RFDIV)) | UFCR_RFDIV_REG(div);
+ writel(ufcr, sport->port.membase + UFCR);
writel(num, sport->port.membase + UBIR);
writel(denom, sport->port.membase + UBMR);
- if (div == 7)
- div = 6; /* 6 in RFDIV means divide by 7 */
- else
- div = 6 - div;
-
- ufcr = readl(sport->port.membase + UFCR);
- ufcr = (ufcr & (~UFCR_RFDIV)) |
- (div << 7);
- writel(ufcr, sport->port.membase + UFCR);
-
#ifdef ONEMS
writel(sport->port.uartclk / div / 1000, sport->port.membase + ONEMS);
#endif
@@ -1072,22 +1226,22 @@
static int serial_imx_suspend(struct platform_device *dev, pm_message_t state)
{
- struct imx_port *sport = platform_get_drvdata(dev);
+ struct imx_port *sport = platform_get_drvdata(dev);
- if (sport)
- uart_suspend_port(&imx_reg, &sport->port);
+ if (sport)
+ uart_suspend_port(&imx_reg, &sport->port);
- return 0;
+ return 0;
}
static int serial_imx_resume(struct platform_device *dev)
{
- struct imx_port *sport = platform_get_drvdata(dev);
+ struct imx_port *sport = platform_get_drvdata(dev);
- if (sport)
- uart_resume_port(&imx_reg, &sport->port);
+ if (sport)
+ uart_resume_port(&imx_reg, &sport->port);
- return 0;
+ return 0;
}
static int serial_imx_probe(struct platform_device *pdev)
@@ -1143,19 +1297,29 @@
imx_ports[pdev->id] = sport;
pdata = pdev->dev.platform_data;
- if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
+ if (pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
sport->have_rtscts = 1;
+#ifdef CONFIG_IRDA
+ if (pdata && (pdata->flags & IMXUART_IRDA))
+ sport->use_irda = 1;
+#endif
+
if (pdata->init) {
ret = pdata->init(pdev);
if (ret)
goto clkput;
}
- uart_add_one_port(&imx_reg, &sport->port);
+ ret = uart_add_one_port(&imx_reg, &sport->port);
+ if (ret)
+ goto deinit;
platform_set_drvdata(pdev, &sport->port);
return 0;
+deinit:
+ if (pdata->exit)
+ pdata->exit(pdev);
clkput:
clk_put(sport->clk);
clk_disable(sport->clk);
@@ -1193,13 +1357,13 @@
}
static struct platform_driver serial_imx_driver = {
- .probe = serial_imx_probe,
- .remove = serial_imx_remove,
+ .probe = serial_imx_probe,
+ .remove = serial_imx_remove,
.suspend = serial_imx_suspend,
.resume = serial_imx_resume,
.driver = {
- .name = "imx-uart",
+ .name = "imx-uart",
.owner = THIS_MODULE,
},
};
diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h
index c0a3e27..4e5f3bd 100644
--- a/drivers/serial/jsm/jsm.h
+++ b/drivers/serial/jsm/jsm.h
@@ -61,6 +61,7 @@
if ((DBG_##nlevel & jsm_debug)) \
dev_printk(KERN_##klevel, pdev->dev, fmt, ## args)
+#define MAXLINES 256
#define MAXPORTS 8
#define MAX_STOPS_SENT 5
diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c
index 31496dc0..107ce2e 100644
--- a/drivers/serial/jsm/jsm_tty.c
+++ b/drivers/serial/jsm/jsm_tty.c
@@ -33,6 +33,8 @@
#include "jsm.h"
+static DECLARE_BITMAP(linemap, MAXLINES);
+
static void jsm_carrier(struct jsm_channel *ch);
static inline int jsm_get_mstat(struct jsm_channel *ch)
@@ -433,6 +435,7 @@
int __devinit jsm_uart_port_init(struct jsm_board *brd)
{
int i;
+ unsigned int line;
struct jsm_channel *ch;
if (!brd)
@@ -459,9 +462,15 @@
brd->channels[i]->uart_port.membase = brd->re_map_membase;
brd->channels[i]->uart_port.fifosize = 16;
brd->channels[i]->uart_port.ops = &jsm_ops;
- brd->channels[i]->uart_port.line = brd->channels[i]->ch_portnum + brd->boardnum * 2;
+ line = find_first_zero_bit(linemap, MAXLINES);
+ if (line >= MAXLINES) {
+ printk(KERN_INFO "jsm: linemap is full, added device failed\n");
+ continue;
+ } else
+ set_bit((int)line, linemap);
+ brd->channels[i]->uart_port.line = line;
if (uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port))
- printk(KERN_INFO "Added device failed\n");
+ printk(KERN_INFO "jsm: add device failed\n");
else
printk(KERN_INFO "Added device \n");
}
@@ -494,6 +503,7 @@
ch = brd->channels[i];
+ clear_bit((int)(ch->uart_port.line), linemap);
uart_remove_one_port(&jsm_uart_driver, &brd->channels[i]->uart_port);
}
diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c
new file mode 100644
index 0000000..ac9e5d5
--- /dev/null
+++ b/drivers/serial/timbuart.c
@@ -0,0 +1,526 @@
+/*
+ * timbuart.c timberdale FPGA UART driver
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * Timberdale FPGA UART
+ */
+
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/ioport.h>
+
+#include "timbuart.h"
+
+struct timbuart_port {
+ struct uart_port port;
+ struct tasklet_struct tasklet;
+ int usedma;
+ u8 last_ier;
+ struct platform_device *dev;
+};
+
+static int baudrates[] = {9600, 19200, 38400, 57600, 115200, 230400, 460800,
+ 921600, 1843200, 3250000};
+
+static void timbuart_mctrl_check(struct uart_port *port, u8 isr, u8 *ier);
+
+static irqreturn_t timbuart_handleinterrupt(int irq, void *devid);
+
+static void timbuart_stop_rx(struct uart_port *port)
+{
+ /* spin lock held by upper layer, disable all RX interrupts */
+ u8 ier = ioread8(port->membase + TIMBUART_IER) & ~RXFLAGS;
+ iowrite8(ier, port->membase + TIMBUART_IER);
+}
+
+static void timbuart_stop_tx(struct uart_port *port)
+{
+ /* spinlock held by upper layer, disable TX interrupt */
+ u8 ier = ioread8(port->membase + TIMBUART_IER) & ~TXBAE;
+ iowrite8(ier, port->membase + TIMBUART_IER);
+}
+
+static void timbuart_start_tx(struct uart_port *port)
+{
+ struct timbuart_port *uart =
+ container_of(port, struct timbuart_port, port);
+
+ /* do not transfer anything here -> fire off the tasklet */
+ tasklet_schedule(&uart->tasklet);
+}
+
+static void timbuart_flush_buffer(struct uart_port *port)
+{
+ u8 ctl = ioread8(port->membase + TIMBUART_CTRL) | TIMBUART_CTRL_FLSHTX;
+
+ iowrite8(ctl, port->membase + TIMBUART_CTRL);
+ iowrite8(TXBF, port->membase + TIMBUART_ISR);
+}
+
+static void timbuart_rx_chars(struct uart_port *port)
+{
+ struct tty_struct *tty = port->info->port.tty;
+
+ while (ioread8(port->membase + TIMBUART_ISR) & RXDP) {
+ u8 ch = ioread8(port->membase + TIMBUART_RXFIFO);
+ port->icount.rx++;
+ tty_insert_flip_char(tty, ch, TTY_NORMAL);
+ }
+
+ spin_unlock(&port->lock);
+ tty_flip_buffer_push(port->info->port.tty);
+ spin_lock(&port->lock);
+
+ dev_dbg(port->dev, "%s - total read %d bytes\n",
+ __func__, port->icount.rx);
+}
+
+static void timbuart_tx_chars(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->info->xmit;
+
+ while (!(ioread8(port->membase + TIMBUART_ISR) & TXBF) &&
+ !uart_circ_empty(xmit)) {
+ iowrite8(xmit->buf[xmit->tail],
+ port->membase + TIMBUART_TXFIFO);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ }
+
+ dev_dbg(port->dev,
+ "%s - total written %d bytes, CTL: %x, RTS: %x, baud: %x\n",
+ __func__,
+ port->icount.tx,
+ ioread8(port->membase + TIMBUART_CTRL),
+ port->mctrl & TIOCM_RTS,
+ ioread8(port->membase + TIMBUART_BAUDRATE));
+}
+
+static void timbuart_handle_tx_port(struct uart_port *port, u8 isr, u8 *ier)
+{
+ struct timbuart_port *uart =
+ container_of(port, struct timbuart_port, port);
+ struct circ_buf *xmit = &port->info->xmit;
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port))
+ return;
+
+ if (port->x_char)
+ return;
+
+ if (isr & TXFLAGS) {
+ timbuart_tx_chars(port);
+ /* clear all TX interrupts */
+ iowrite8(TXFLAGS, port->membase + TIMBUART_ISR);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+ } else
+ /* Re-enable any tx interrupt */
+ *ier |= uart->last_ier & TXFLAGS;
+
+ /* enable interrupts if there are chars in the transmit buffer,
+ * Or if we delivered some bytes and want the almost empty interrupt
+ * we wake up the upper layer later when we got the interrupt
+ * to give it some time to go out...
+ */
+ if (!uart_circ_empty(xmit))
+ *ier |= TXBAE;
+
+ dev_dbg(port->dev, "%s - leaving\n", __func__);
+}
+
+void timbuart_handle_rx_port(struct uart_port *port, u8 isr, u8 *ier)
+{
+ if (isr & RXFLAGS) {
+ /* Some RX status is set */
+ if (isr & RXBF) {
+ u8 ctl = ioread8(port->membase + TIMBUART_CTRL) |
+ TIMBUART_CTRL_FLSHRX;
+ iowrite8(ctl, port->membase + TIMBUART_CTRL);
+ port->icount.overrun++;
+ } else if (isr & (RXDP))
+ timbuart_rx_chars(port);
+
+ /* ack all RX interrupts */
+ iowrite8(RXFLAGS, port->membase + TIMBUART_ISR);
+ }
+
+ /* always have the RX interrupts enabled */
+ *ier |= RXBAF | RXBF | RXTT;
+
+ dev_dbg(port->dev, "%s - leaving\n", __func__);
+}
+
+void timbuart_tasklet(unsigned long arg)
+{
+ struct timbuart_port *uart = (struct timbuart_port *)arg;
+ u8 isr, ier = 0;
+
+ spin_lock(&uart->port.lock);
+
+ isr = ioread8(uart->port.membase + TIMBUART_ISR);
+ dev_dbg(uart->port.dev, "%s ISR: %x\n", __func__, isr);
+
+ if (!uart->usedma)
+ timbuart_handle_tx_port(&uart->port, isr, &ier);
+
+ timbuart_mctrl_check(&uart->port, isr, &ier);
+
+ if (!uart->usedma)
+ timbuart_handle_rx_port(&uart->port, isr, &ier);
+
+ iowrite8(ier, uart->port.membase + TIMBUART_IER);
+
+ spin_unlock(&uart->port.lock);
+ dev_dbg(uart->port.dev, "%s leaving\n", __func__);
+}
+
+static unsigned int timbuart_tx_empty(struct uart_port *port)
+{
+ u8 isr = ioread8(port->membase + TIMBUART_ISR);
+
+ return (isr & TXBAE) ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int timbuart_get_mctrl(struct uart_port *port)
+{
+ u8 cts = ioread8(port->membase + TIMBUART_CTRL);
+ dev_dbg(port->dev, "%s - cts %x\n", __func__, cts);
+
+ if (cts & TIMBUART_CTRL_CTS)
+ return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+ else
+ return TIOCM_DSR | TIOCM_CAR;
+}
+
+static void timbuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ dev_dbg(port->dev, "%s - %x\n", __func__, mctrl);
+
+ if (mctrl & TIOCM_RTS)
+ iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL);
+ else
+ iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL);
+}
+
+static void timbuart_mctrl_check(struct uart_port *port, u8 isr, u8 *ier)
+{
+ unsigned int cts;
+
+ if (isr & CTS_DELTA) {
+ /* ack */
+ iowrite8(CTS_DELTA, port->membase + TIMBUART_ISR);
+ cts = timbuart_get_mctrl(port);
+ uart_handle_cts_change(port, cts & TIOCM_CTS);
+ wake_up_interruptible(&port->info->delta_msr_wait);
+ }
+
+ *ier |= CTS_DELTA;
+}
+
+static void timbuart_enable_ms(struct uart_port *port)
+{
+ /* N/A */
+}
+
+static void timbuart_break_ctl(struct uart_port *port, int ctl)
+{
+ /* N/A */
+}
+
+static int timbuart_startup(struct uart_port *port)
+{
+ struct timbuart_port *uart =
+ container_of(port, struct timbuart_port, port);
+
+ dev_dbg(port->dev, "%s\n", __func__);
+
+ iowrite8(TIMBUART_CTRL_FLSHRX, port->membase + TIMBUART_CTRL);
+ iowrite8(0xff, port->membase + TIMBUART_ISR);
+ /* Enable all but TX interrupts */
+ iowrite8(RXBAF | RXBF | RXTT | CTS_DELTA,
+ port->membase + TIMBUART_IER);
+
+ return request_irq(port->irq, timbuart_handleinterrupt, IRQF_SHARED,
+ "timb-uart", uart);
+}
+
+static void timbuart_shutdown(struct uart_port *port)
+{
+ struct timbuart_port *uart =
+ container_of(port, struct timbuart_port, port);
+ dev_dbg(port->dev, "%s\n", __func__);
+ free_irq(port->irq, uart);
+ iowrite8(0, port->membase + TIMBUART_IER);
+}
+
+static int get_bindex(int baud)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(baudrates); i++)
+ if (baud <= baudrates[i])
+ return i;
+
+ return -1;
+}
+
+static void timbuart_set_termios(struct uart_port *port,
+ struct ktermios *termios,
+ struct ktermios *old)
+{
+ unsigned int baud;
+ short bindex;
+ unsigned long flags;
+
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
+ bindex = get_bindex(baud);
+ dev_dbg(port->dev, "%s - bindex %d\n", __func__, bindex);
+
+ if (bindex < 0)
+ bindex = 0;
+ baud = baudrates[bindex];
+
+ /* The serial layer calls into this once with old = NULL when setting
+ up initially */
+ if (old)
+ tty_termios_copy_hw(termios, old);
+ tty_termios_encode_baud_rate(termios, baud, baud);
+
+ spin_lock_irqsave(&port->lock, flags);
+ iowrite8((u8)bindex, port->membase + TIMBUART_BAUDRATE);
+ uart_update_timeout(port, termios->c_cflag, baud);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *timbuart_type(struct uart_port *port)
+{
+ return port->type == PORT_UNKNOWN ? "timbuart" : NULL;
+}
+
+/* We do not request/release mappings of the registers here,
+ * currently it's done in the proble function.
+ */
+static void timbuart_release_port(struct uart_port *port)
+{
+ struct platform_device *pdev = to_platform_device(port->dev);
+ int size =
+ resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0));
+
+ if (port->flags & UPF_IOREMAP) {
+ iounmap(port->membase);
+ port->membase = NULL;
+ }
+
+ release_mem_region(port->mapbase, size);
+}
+
+static int timbuart_request_port(struct uart_port *port)
+{
+ struct platform_device *pdev = to_platform_device(port->dev);
+ int size =
+ resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0));
+
+ if (!request_mem_region(port->mapbase, size, "timb-uart"))
+ return -EBUSY;
+
+ if (port->flags & UPF_IOREMAP) {
+ port->membase = ioremap(port->mapbase, size);
+ if (port->membase == NULL) {
+ release_mem_region(port->mapbase, size);
+ return -ENOMEM;
+ }
+ }
+
+ return 0;
+}
+
+static irqreturn_t timbuart_handleinterrupt(int irq, void *devid)
+{
+ struct timbuart_port *uart = (struct timbuart_port *)devid;
+
+ if (ioread8(uart->port.membase + TIMBUART_IPR)) {
+ uart->last_ier = ioread8(uart->port.membase + TIMBUART_IER);
+
+ /* disable interrupts, the tasklet enables them again */
+ iowrite8(0, uart->port.membase + TIMBUART_IER);
+
+ /* fire off bottom half */
+ tasklet_schedule(&uart->tasklet);
+
+ return IRQ_HANDLED;
+ } else
+ return IRQ_NONE;
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void timbuart_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE) {
+ port->type = PORT_TIMBUART;
+ timbuart_request_port(port);
+ }
+}
+
+static int timbuart_verify_port(struct uart_port *port,
+ struct serial_struct *ser)
+{
+ /* we don't want the core code to modify any port params */
+ return -EINVAL;
+}
+
+static struct uart_ops timbuart_ops = {
+ .tx_empty = timbuart_tx_empty,
+ .set_mctrl = timbuart_set_mctrl,
+ .get_mctrl = timbuart_get_mctrl,
+ .stop_tx = timbuart_stop_tx,
+ .start_tx = timbuart_start_tx,
+ .flush_buffer = timbuart_flush_buffer,
+ .stop_rx = timbuart_stop_rx,
+ .enable_ms = timbuart_enable_ms,
+ .break_ctl = timbuart_break_ctl,
+ .startup = timbuart_startup,
+ .shutdown = timbuart_shutdown,
+ .set_termios = timbuart_set_termios,
+ .type = timbuart_type,
+ .release_port = timbuart_release_port,
+ .request_port = timbuart_request_port,
+ .config_port = timbuart_config_port,
+ .verify_port = timbuart_verify_port
+};
+
+static struct uart_driver timbuart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = "timberdale_uart",
+ .dev_name = "ttyTU",
+ .major = TIMBUART_MAJOR,
+ .minor = TIMBUART_MINOR,
+ .nr = 1
+};
+
+static int timbuart_probe(struct platform_device *dev)
+{
+ int err;
+ struct timbuart_port *uart;
+ struct resource *iomem;
+
+ dev_dbg(&dev->dev, "%s\n", __func__);
+
+ uart = kzalloc(sizeof(*uart), GFP_KERNEL);
+ if (!uart) {
+ err = -EINVAL;
+ goto err_mem;
+ }
+
+ uart->usedma = 0;
+
+ uart->port.uartclk = 3250000 * 16;
+ uart->port.fifosize = TIMBUART_FIFO_SIZE;
+ uart->port.regshift = 2;
+ uart->port.iotype = UPIO_MEM;
+ uart->port.ops = &timbuart_ops;
+ uart->port.irq = 0;
+ uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
+ uart->port.line = 0;
+ uart->port.dev = &dev->dev;
+
+ iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (!iomem) {
+ err = -ENOMEM;
+ goto err_register;
+ }
+ uart->port.mapbase = iomem->start;
+ uart->port.membase = NULL;
+
+ uart->port.irq = platform_get_irq(dev, 0);
+ if (uart->port.irq < 0) {
+ err = -EINVAL;
+ goto err_register;
+ }
+
+ tasklet_init(&uart->tasklet, timbuart_tasklet, (unsigned long)uart);
+
+ err = uart_register_driver(&timbuart_driver);
+ if (err)
+ goto err_register;
+
+ err = uart_add_one_port(&timbuart_driver, &uart->port);
+ if (err)
+ goto err_add_port;
+
+ platform_set_drvdata(dev, uart);
+
+ return 0;
+
+err_add_port:
+ uart_unregister_driver(&timbuart_driver);
+err_register:
+ kfree(uart);
+err_mem:
+ printk(KERN_ERR "timberdale: Failed to register Timberdale UART: %d\n",
+ err);
+
+ return err;
+}
+
+static int timbuart_remove(struct platform_device *dev)
+{
+ struct timbuart_port *uart = platform_get_drvdata(dev);
+
+ tasklet_kill(&uart->tasklet);
+ uart_remove_one_port(&timbuart_driver, &uart->port);
+ uart_unregister_driver(&timbuart_driver);
+ kfree(uart);
+
+ return 0;
+}
+
+static struct platform_driver timbuart_platform_driver = {
+ .driver = {
+ .name = "timb-uart",
+ .owner = THIS_MODULE,
+ },
+ .probe = timbuart_probe,
+ .remove = timbuart_remove,
+};
+
+/*--------------------------------------------------------------------------*/
+
+static int __init timbuart_init(void)
+{
+ return platform_driver_register(&timbuart_platform_driver);
+}
+
+static void __exit timbuart_exit(void)
+{
+ platform_driver_unregister(&timbuart_platform_driver);
+}
+
+module_init(timbuart_init);
+module_exit(timbuart_exit);
+
+MODULE_DESCRIPTION("Timberdale UART driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:timb-uart");
+
diff --git a/drivers/serial/timbuart.h b/drivers/serial/timbuart.h
new file mode 100644
index 0000000..7e56676
--- /dev/null
+++ b/drivers/serial/timbuart.h
@@ -0,0 +1,58 @@
+/*
+ * timbuart.c timberdale FPGA GPIO driver
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * Timberdale FPGA UART
+ */
+
+#ifndef _TIMBUART_H
+#define _TIMBUART_H
+
+#define TIMBUART_FIFO_SIZE 2048
+
+#define TIMBUART_RXFIFO 0x08
+#define TIMBUART_TXFIFO 0x0c
+#define TIMBUART_IER 0x10
+#define TIMBUART_IPR 0x14
+#define TIMBUART_ISR 0x18
+#define TIMBUART_CTRL 0x1c
+#define TIMBUART_BAUDRATE 0x20
+
+#define TIMBUART_CTRL_RTS 0x01
+#define TIMBUART_CTRL_CTS 0x02
+#define TIMBUART_CTRL_FLSHTX 0x40
+#define TIMBUART_CTRL_FLSHRX 0x80
+
+#define TXBF 0x01
+#define TXBAE 0x02
+#define CTS_DELTA 0x04
+#define RXDP 0x08
+#define RXBAF 0x10
+#define RXBF 0x20
+#define RXTT 0x40
+#define RXBNAE 0x80
+#define TXBE 0x100
+
+#define RXFLAGS (RXDP | RXBAF | RXBF | RXTT | RXBNAE)
+#define TXFLAGS (TXBF | TXBAE)
+
+#define TIMBUART_MAJOR 204
+#define TIMBUART_MINOR 192
+
+#endif /* _TIMBUART_H */
+
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 7a1164d..ddeb691 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -16,7 +16,8 @@
* v0.9 - thorough cleaning, URBification, almost a rewrite
* v0.10 - some more cleanups
* v0.11 - fixed flow control, read error doesn't stop reads
- * v0.12 - added TIOCM ioctls, added break handling, made struct acm kmalloced
+ * v0.12 - added TIOCM ioctls, added break handling, made struct acm
+ * kmalloced
* v0.13 - added termios, added hangup
* v0.14 - sized down struct acm
* v0.15 - fixed flow control again - characters could be lost
@@ -62,7 +63,7 @@
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/mutex.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/cdc.h>
#include <asm/byteorder.h>
@@ -87,7 +88,10 @@
static DEFINE_MUTEX(open_mutex);
-#define ACM_READY(acm) (acm && acm->dev && acm->used)
+#define ACM_READY(acm) (acm && acm->dev && acm->port.count)
+
+static const struct tty_port_operations acm_port_ops = {
+};
#ifdef VERBOSE_DEBUG
#define verbose 1
@@ -99,13 +103,15 @@
* Functions for ACM control messages.
*/
-static int acm_ctrl_msg(struct acm *acm, int request, int value, void *buf, int len)
+static int acm_ctrl_msg(struct acm *acm, int request, int value,
+ void *buf, int len)
{
int retval = usb_control_msg(acm->dev, usb_sndctrlpipe(acm->dev, 0),
request, USB_RT_ACM, value,
acm->control->altsetting[0].desc.bInterfaceNumber,
buf, len, 5000);
- dbg("acm_control_msg: rq: 0x%02x val: %#x len: %#x result: %d", request, value, len, retval);
+ dbg("acm_control_msg: rq: 0x%02x val: %#x len: %#x result: %d",
+ request, value, len, retval);
return retval < 0 ? retval : 0;
}
@@ -150,9 +156,8 @@
n = ACM_NW;
spin_lock_irqsave(&acm->write_lock, flags);
- for (i = 0; i < ACM_NW; i++) {
+ for (i = 0; i < ACM_NW; i++)
n -= acm->wb[i].use;
- }
spin_unlock_irqrestore(&acm->write_lock, flags);
return n;
}
@@ -183,7 +188,8 @@
wb->urb->transfer_buffer_length = wb->len;
wb->urb->dev = acm->dev;
- if ((rc = usb_submit_urb(wb->urb, GFP_ATOMIC)) < 0) {
+ rc = usb_submit_urb(wb->urb, GFP_ATOMIC);
+ if (rc < 0) {
dbg("usb_submit_urb(write bulk) failed: %d", rc);
acm_write_done(acm, wb);
}
@@ -262,6 +268,7 @@
{
struct acm *acm = urb->context;
struct usb_cdc_notification *dr = urb->transfer_buffer;
+ struct tty_struct *tty;
unsigned char *data;
int newctrl;
int retval;
@@ -287,40 +294,45 @@
data = (unsigned char *)(dr + 1);
switch (dr->bNotificationType) {
+ case USB_CDC_NOTIFY_NETWORK_CONNECTION:
+ dbg("%s network", dr->wValue ?
+ "connected to" : "disconnected from");
+ break;
- case USB_CDC_NOTIFY_NETWORK_CONNECTION:
+ case USB_CDC_NOTIFY_SERIAL_STATE:
+ tty = tty_port_tty_get(&acm->port);
+ newctrl = get_unaligned_le16(data);
- dbg("%s network", dr->wValue ? "connected to" : "disconnected from");
- break;
-
- case USB_CDC_NOTIFY_SERIAL_STATE:
-
- newctrl = get_unaligned_le16(data);
-
- if (acm->tty && !acm->clocal && (acm->ctrlin & ~newctrl & ACM_CTRL_DCD)) {
+ if (tty) {
+ if (!acm->clocal &&
+ (acm->ctrlin & ~newctrl & ACM_CTRL_DCD)) {
dbg("calling hangup");
- tty_hangup(acm->tty);
+ tty_hangup(tty);
}
+ tty_kref_put(tty);
+ }
- acm->ctrlin = newctrl;
+ acm->ctrlin = newctrl;
- dbg("input control lines: dcd%c dsr%c break%c ring%c framing%c parity%c overrun%c",
- acm->ctrlin & ACM_CTRL_DCD ? '+' : '-', acm->ctrlin & ACM_CTRL_DSR ? '+' : '-',
- acm->ctrlin & ACM_CTRL_BRK ? '+' : '-', acm->ctrlin & ACM_CTRL_RI ? '+' : '-',
- acm->ctrlin & ACM_CTRL_FRAMING ? '+' : '-', acm->ctrlin & ACM_CTRL_PARITY ? '+' : '-',
- acm->ctrlin & ACM_CTRL_OVERRUN ? '+' : '-');
-
+ dbg("input control lines: dcd%c dsr%c break%c ring%c framing%c parity%c overrun%c",
+ acm->ctrlin & ACM_CTRL_DCD ? '+' : '-',
+ acm->ctrlin & ACM_CTRL_DSR ? '+' : '-',
+ acm->ctrlin & ACM_CTRL_BRK ? '+' : '-',
+ acm->ctrlin & ACM_CTRL_RI ? '+' : '-',
+ acm->ctrlin & ACM_CTRL_FRAMING ? '+' : '-',
+ acm->ctrlin & ACM_CTRL_PARITY ? '+' : '-',
+ acm->ctrlin & ACM_CTRL_OVERRUN ? '+' : '-');
break;
- default:
- dbg("unknown notification %d received: index %d len %d data0 %d data1 %d",
- dr->bNotificationType, dr->wIndex,
- dr->wLength, data[0], data[1]);
- break;
+ default:
+ dbg("unknown notification %d received: index %d len %d data0 %d data1 %d",
+ dr->bNotificationType, dr->wIndex,
+ dr->wLength, data[0], data[1]);
+ break;
}
exit:
usb_mark_last_busy(acm->dev);
- retval = usb_submit_urb (urb, GFP_ATOMIC);
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
dev_err(&urb->dev->dev, "%s - usb_submit_urb failed with "
"result %d", __func__, retval);
@@ -371,15 +383,14 @@
{
struct acm *acm = (void *)_acm;
struct acm_rb *buf;
- struct tty_struct *tty = acm->tty;
+ struct tty_struct *tty;
struct acm_ru *rcv;
unsigned long flags;
unsigned char throttled;
dbg("Entering acm_rx_tasklet");
- if (!ACM_READY(acm))
- {
+ if (!ACM_READY(acm)) {
dbg("acm_rx_tasklet: ACM not ready");
return;
}
@@ -387,12 +398,13 @@
spin_lock_irqsave(&acm->throttle_lock, flags);
throttled = acm->throttle;
spin_unlock_irqrestore(&acm->throttle_lock, flags);
- if (throttled)
- {
+ if (throttled) {
dbg("acm_rx_tasklet: throttled");
return;
}
+ tty = tty_port_tty_get(&acm->port);
+
next_buffer:
spin_lock_irqsave(&acm->read_lock, flags);
if (list_empty(&acm->filled_read_bufs)) {
@@ -406,20 +418,22 @@
dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d", buf, buf->size);
- tty_buffer_request_room(tty, buf->size);
- spin_lock_irqsave(&acm->throttle_lock, flags);
- throttled = acm->throttle;
- spin_unlock_irqrestore(&acm->throttle_lock, flags);
- if (!throttled)
- tty_insert_flip_string(tty, buf->base, buf->size);
- tty_flip_buffer_push(tty);
-
- if (throttled) {
- dbg("Throttling noticed");
- spin_lock_irqsave(&acm->read_lock, flags);
- list_add(&buf->list, &acm->filled_read_bufs);
- spin_unlock_irqrestore(&acm->read_lock, flags);
- return;
+ if (tty) {
+ spin_lock_irqsave(&acm->throttle_lock, flags);
+ throttled = acm->throttle;
+ spin_unlock_irqrestore(&acm->throttle_lock, flags);
+ if (!throttled) {
+ tty_buffer_request_room(tty, buf->size);
+ tty_insert_flip_string(tty, buf->base, buf->size);
+ tty_flip_buffer_push(tty);
+ } else {
+ tty_kref_put(tty);
+ dbg("Throttling noticed");
+ spin_lock_irqsave(&acm->read_lock, flags);
+ list_add(&buf->list, &acm->filled_read_bufs);
+ spin_unlock_irqrestore(&acm->read_lock, flags);
+ return;
+ }
}
spin_lock_irqsave(&acm->read_lock, flags);
@@ -428,6 +442,8 @@
goto next_buffer;
urbs:
+ tty_kref_put(tty);
+
while (!list_empty(&acm->spare_read_bufs)) {
spin_lock_irqsave(&acm->read_lock, flags);
if (list_empty(&acm->spare_read_urbs)) {
@@ -454,10 +470,11 @@
rcv->urb->transfer_dma = buf->dma;
rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- /* This shouldn't kill the driver as unsuccessful URBs are returned to the
- free-urbs-pool and resubmited ASAP */
+ /* This shouldn't kill the driver as unsuccessful URBs are
+ returned to the free-urbs-pool and resubmited ASAP */
spin_lock_irqsave(&acm->read_lock, flags);
- if (acm->susp_count || usb_submit_urb(rcv->urb, GFP_ATOMIC) < 0) {
+ if (acm->susp_count ||
+ usb_submit_urb(rcv->urb, GFP_ATOMIC) < 0) {
list_add(&buf->list, &acm->spare_read_bufs);
list_add(&rcv->list, &acm->spare_read_urbs);
acm->processing = 0;
@@ -499,11 +516,14 @@
static void acm_softint(struct work_struct *work)
{
struct acm *acm = container_of(work, struct acm, work);
+ struct tty_struct *tty;
dev_vdbg(&acm->data->dev, "tx work\n");
if (!ACM_READY(acm))
return;
- tty_wakeup(acm->tty);
+ tty = tty_port_tty_get(&acm->port);
+ tty_wakeup(tty);
+ tty_kref_put(tty);
}
static void acm_waker(struct work_struct *waker)
@@ -543,8 +563,9 @@
rv = 0;
set_bit(TTY_NO_WRITE_SPLIT, &tty->flags);
+
tty->driver_data = acm;
- acm->tty = tty;
+ tty_port_tty_set(&acm->port, tty);
if (usb_autopm_get_interface(acm->control) < 0)
goto early_bail;
@@ -552,11 +573,10 @@
acm->control->needs_remote_wakeup = 1;
mutex_lock(&acm->mutex);
- if (acm->used++) {
+ if (acm->port.count++) {
usb_autopm_put_interface(acm->control);
goto done;
- }
-
+ }
acm->ctrlurb->dev = acm->dev;
if (usb_submit_urb(acm->ctrlurb, GFP_KERNEL)) {
@@ -567,22 +587,22 @@
if (0 > acm_set_control(acm, acm->ctrlout = ACM_CTRL_DTR | ACM_CTRL_RTS) &&
(acm->ctrl_caps & USB_CDC_CAP_LINE))
goto full_bailout;
+
usb_autopm_put_interface(acm->control);
INIT_LIST_HEAD(&acm->spare_read_urbs);
INIT_LIST_HEAD(&acm->spare_read_bufs);
INIT_LIST_HEAD(&acm->filled_read_bufs);
- for (i = 0; i < acm->rx_buflimit; i++) {
+
+ for (i = 0; i < acm->rx_buflimit; i++)
list_add(&(acm->ru[i].list), &acm->spare_read_urbs);
- }
- for (i = 0; i < acm->rx_buflimit; i++) {
+ for (i = 0; i < acm->rx_buflimit; i++)
list_add(&(acm->rb[i].list), &acm->spare_read_bufs);
- }
acm->throttle = 0;
tasklet_schedule(&acm->urb_task);
-
+ rv = tty_port_block_til_ready(&acm->port, tty, filp);
done:
mutex_unlock(&acm->mutex);
err_out:
@@ -593,16 +613,17 @@
usb_kill_urb(acm->ctrlurb);
bail_out:
usb_autopm_put_interface(acm->control);
- acm->used--;
+ acm->port.count--;
mutex_unlock(&acm->mutex);
early_bail:
mutex_unlock(&open_mutex);
+ tty_port_tty_set(&acm->port, NULL);
return -EIO;
}
static void acm_tty_unregister(struct acm *acm)
{
- int i,nr;
+ int i, nr;
nr = acm->rx_buflimit;
tty_unregister_device(acm_tty_driver, acm->minor);
@@ -619,41 +640,56 @@
static int acm_tty_chars_in_buffer(struct tty_struct *tty);
-static void acm_tty_close(struct tty_struct *tty, struct file *filp)
+static void acm_port_down(struct acm *acm, int drain)
{
- struct acm *acm = tty->driver_data;
- int i,nr;
-
- if (!acm || !acm->used)
- return;
-
- nr = acm->rx_buflimit;
+ int i, nr = acm->rx_buflimit;
mutex_lock(&open_mutex);
- if (!--acm->used) {
- if (acm->dev) {
- usb_autopm_get_interface(acm->control);
- acm_set_control(acm, acm->ctrlout = 0);
-
- /* try letting the last writes drain naturally */
+ if (acm->dev) {
+ usb_autopm_get_interface(acm->control);
+ acm_set_control(acm, acm->ctrlout = 0);
+ /* try letting the last writes drain naturally */
+ if (drain) {
wait_event_interruptible_timeout(acm->drain_wait,
- (ACM_NW == acm_wb_is_avail(acm))
- || !acm->dev,
+ (ACM_NW == acm_wb_is_avail(acm)) || !acm->dev,
ACM_CLOSE_TIMEOUT * HZ);
-
- usb_kill_urb(acm->ctrlurb);
- for (i = 0; i < ACM_NW; i++)
- usb_kill_urb(acm->wb[i].urb);
- for (i = 0; i < nr; i++)
- usb_kill_urb(acm->ru[i].urb);
- acm->control->needs_remote_wakeup = 0;
- usb_autopm_put_interface(acm->control);
- } else
- acm_tty_unregister(acm);
+ }
+ usb_kill_urb(acm->ctrlurb);
+ for (i = 0; i < ACM_NW; i++)
+ usb_kill_urb(acm->wb[i].urb);
+ for (i = 0; i < nr; i++)
+ usb_kill_urb(acm->ru[i].urb);
+ acm->control->needs_remote_wakeup = 0;
+ usb_autopm_put_interface(acm->control);
}
mutex_unlock(&open_mutex);
}
-static int acm_tty_write(struct tty_struct *tty, const unsigned char *buf, int count)
+static void acm_tty_hangup(struct tty_struct *tty)
+{
+ struct acm *acm = tty->driver_data;
+ tty_port_hangup(&acm->port);
+ acm_port_down(acm, 0);
+}
+
+static void acm_tty_close(struct tty_struct *tty, struct file *filp)
+{
+ struct acm *acm = tty->driver_data;
+
+ /* Perform the closing process and see if we need to do the hardware
+ shutdown */
+ if (tty_port_close_start(&acm->port, tty, filp) == 0)
+ return;
+ acm_port_down(acm, 0);
+ tty_port_close_end(&acm->port, tty);
+ mutex_lock(&open_mutex);
+ tty_port_tty_set(&acm->port, NULL);
+ if (!acm->dev)
+ acm_tty_unregister(acm);
+ mutex_unlock(&open_mutex);
+}
+
+static int acm_tty_write(struct tty_struct *tty,
+ const unsigned char *buf, int count)
{
struct acm *acm = tty->driver_data;
int stat;
@@ -669,7 +705,8 @@
return 0;
spin_lock_irqsave(&acm->write_lock, flags);
- if ((wbn = acm_wb_alloc(acm)) < 0) {
+ wbn = acm_wb_alloc(acm);
+ if (wbn < 0) {
spin_unlock_irqrestore(&acm->write_lock, flags);
return 0;
}
@@ -681,7 +718,8 @@
wb->len = count;
spin_unlock_irqrestore(&acm->write_lock, flags);
- if ((stat = acm_write_start(acm, wbn)) < 0)
+ stat = acm_write_start(acm, wbn);
+ if (stat < 0)
return stat;
return count;
}
@@ -767,8 +805,10 @@
return -EINVAL;
newctrl = acm->ctrlout;
- set = (set & TIOCM_DTR ? ACM_CTRL_DTR : 0) | (set & TIOCM_RTS ? ACM_CTRL_RTS : 0);
- clear = (clear & TIOCM_DTR ? ACM_CTRL_DTR : 0) | (clear & TIOCM_RTS ? ACM_CTRL_RTS : 0);
+ set = (set & TIOCM_DTR ? ACM_CTRL_DTR : 0) |
+ (set & TIOCM_RTS ? ACM_CTRL_RTS : 0);
+ clear = (clear & TIOCM_DTR ? ACM_CTRL_DTR : 0) |
+ (clear & TIOCM_RTS ? ACM_CTRL_RTS : 0);
newctrl = (newctrl & ~clear) | set;
@@ -777,7 +817,8 @@
return acm_set_control(acm, acm->ctrlout = newctrl);
}
-static int acm_tty_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
+static int acm_tty_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
{
struct acm *acm = tty->driver_data;
@@ -799,7 +840,8 @@
5, 6, 7, 8
};
-static void acm_tty_set_termios(struct tty_struct *tty, struct ktermios *termios_old)
+static void acm_tty_set_termios(struct tty_struct *tty,
+ struct ktermios *termios_old)
{
struct acm *acm = tty->driver_data;
struct ktermios *termios = tty->termios;
@@ -809,19 +851,23 @@
if (!ACM_READY(acm))
return;
+ /* FIXME: Needs to support the tty_baud interface */
+ /* FIXME: Broken on sparc */
newline.dwDTERate = cpu_to_le32p(acm_tty_speed +
(termios->c_cflag & CBAUD & ~CBAUDEX) + (termios->c_cflag & CBAUDEX ? 15 : 0));
newline.bCharFormat = termios->c_cflag & CSTOPB ? 2 : 0;
newline.bParityType = termios->c_cflag & PARENB ?
- (termios->c_cflag & PARODD ? 1 : 2) + (termios->c_cflag & CMSPAR ? 2 : 0) : 0;
+ (termios->c_cflag & PARODD ? 1 : 2) +
+ (termios->c_cflag & CMSPAR ? 2 : 0) : 0;
newline.bDataBits = acm_tty_size[(termios->c_cflag & CSIZE) >> 4];
-
+ /* FIXME: Needs to clear unsupported bits in the termios */
acm->clocal = ((termios->c_cflag & CLOCAL) != 0);
if (!newline.dwDTERate) {
newline.dwDTERate = acm->line.dwDTERate;
newctrl &= ~ACM_CTRL_DTR;
- } else newctrl |= ACM_CTRL_DTR;
+ } else
+ newctrl |= ACM_CTRL_DTR;
if (newctrl != acm->ctrlout)
acm_set_control(acm, acm->ctrlout = newctrl);
@@ -846,9 +892,8 @@
struct acm_wb *wb;
struct usb_device *usb_dev = interface_to_usbdev(acm->control);
- for (wb = &acm->wb[0], i = 0; i < ACM_NW; i++, wb++) {
+ for (wb = &acm->wb[0], i = 0; i < ACM_NW; i++, wb++)
usb_buffer_free(usb_dev, acm->writesize, wb->buf, wb->dmah);
- }
}
static void acm_read_buffers_free(struct acm *acm)
@@ -857,7 +902,8 @@
int i, n = acm->rx_buflimit;
for (i = 0; i < n; i++)
- usb_buffer_free(usb_dev, acm->readsize, acm->rb[i].base, acm->rb[i].dma);
+ usb_buffer_free(usb_dev, acm->readsize,
+ acm->rb[i].base, acm->rb[i].dma);
}
/* Little helper: write buffers allocate */
@@ -882,8 +928,8 @@
return 0;
}
-static int acm_probe (struct usb_interface *intf,
- const struct usb_device_id *id)
+static int acm_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
{
struct usb_cdc_union_desc *union_header = NULL;
struct usb_cdc_country_functional_desc *cfd = NULL;
@@ -897,7 +943,7 @@
struct usb_device *usb_dev = interface_to_usbdev(intf);
struct acm *acm;
int minor;
- int ctrlsize,readsize;
+ int ctrlsize, readsize;
u8 *buf;
u8 ac_management_function = 0;
u8 call_management_function = 0;
@@ -917,7 +963,7 @@
control_interface = usb_ifnum_to_if(usb_dev, 0);
goto skip_normal_probe;
}
-
+
/* normal probing*/
if (!buffer) {
dev_err(&intf->dev, "Weird descriptor references\n");
@@ -925,8 +971,10 @@
}
if (!buflen) {
- if (intf->cur_altsetting->endpoint->extralen && intf->cur_altsetting->endpoint->extra) {
- dev_dbg(&intf->dev,"Seeking extra descriptors on endpoint\n");
+ if (intf->cur_altsetting->endpoint->extralen &&
+ intf->cur_altsetting->endpoint->extra) {
+ dev_dbg(&intf->dev,
+ "Seeking extra descriptors on endpoint\n");
buflen = intf->cur_altsetting->endpoint->extralen;
buffer = intf->cur_altsetting->endpoint->extra;
} else {
@@ -937,47 +985,43 @@
}
while (buflen > 0) {
- if (buffer [1] != USB_DT_CS_INTERFACE) {
+ if (buffer[1] != USB_DT_CS_INTERFACE) {
dev_err(&intf->dev, "skipping garbage\n");
goto next_desc;
}
- switch (buffer [2]) {
- case USB_CDC_UNION_TYPE: /* we've found it */
- if (union_header) {
- dev_err(&intf->dev, "More than one "
- "union descriptor, "
- "skipping ...\n");
- goto next_desc;
- }
- union_header = (struct usb_cdc_union_desc *)
- buffer;
- break;
- case USB_CDC_COUNTRY_TYPE: /* export through sysfs*/
- cfd = (struct usb_cdc_country_functional_desc *)buffer;
- break;
- case USB_CDC_HEADER_TYPE: /* maybe check version */
- break; /* for now we ignore it */
- case USB_CDC_ACM_TYPE:
- ac_management_function = buffer[3];
- break;
- case USB_CDC_CALL_MANAGEMENT_TYPE:
- call_management_function = buffer[3];
- call_interface_num = buffer[4];
- if ((call_management_function & 3) != 3)
- dev_err(&intf->dev, "This device "
- "cannot do calls on its own. "
- "It is no modem.\n");
- break;
- default:
- /* there are LOTS more CDC descriptors that
- * could legitimately be found here.
- */
- dev_dbg(&intf->dev, "Ignoring descriptor: "
- "type %02x, length %d\n",
- buffer[2], buffer[0]);
- break;
+ switch (buffer[2]) {
+ case USB_CDC_UNION_TYPE: /* we've found it */
+ if (union_header) {
+ dev_err(&intf->dev, "More than one "
+ "union descriptor, skipping ...\n");
+ goto next_desc;
}
+ union_header = (struct usb_cdc_union_desc *)buffer;
+ break;
+ case USB_CDC_COUNTRY_TYPE: /* export through sysfs*/
+ cfd = (struct usb_cdc_country_functional_desc *)buffer;
+ break;
+ case USB_CDC_HEADER_TYPE: /* maybe check version */
+ break; /* for now we ignore it */
+ case USB_CDC_ACM_TYPE:
+ ac_management_function = buffer[3];
+ break;
+ case USB_CDC_CALL_MANAGEMENT_TYPE:
+ call_management_function = buffer[3];
+ call_interface_num = buffer[4];
+ if ((call_management_function & 3) != 3)
+ dev_err(&intf->dev, "This device cannot do calls on its own. It is not a modem.\n");
+ break;
+ default:
+ /* there are LOTS more CDC descriptors that
+ * could legitimately be found here.
+ */
+ dev_dbg(&intf->dev, "Ignoring descriptor: "
+ "type %02x, length %d\n",
+ buffer[2], buffer[0]);
+ break;
+ }
next_desc:
buflen -= buffer[0];
buffer += buffer[0];
@@ -985,33 +1029,36 @@
if (!union_header) {
if (call_interface_num > 0) {
- dev_dbg(&intf->dev,"No union descriptor, using call management descriptor\n");
+ dev_dbg(&intf->dev, "No union descriptor, using call management descriptor\n");
data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = call_interface_num));
control_interface = intf;
} else {
- dev_dbg(&intf->dev,"No union descriptor, giving up\n");
+ dev_dbg(&intf->dev,
+ "No union descriptor, giving up\n");
return -ENODEV;
}
} else {
control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0);
data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = union_header->bSlaveInterface0));
if (!control_interface || !data_interface) {
- dev_dbg(&intf->dev,"no interfaces\n");
+ dev_dbg(&intf->dev, "no interfaces\n");
return -ENODEV;
}
}
-
+
if (data_interface_num != call_interface_num)
- dev_dbg(&intf->dev,"Separate call control interface. That is not fully supported.\n");
+ dev_dbg(&intf->dev, "Separate call control interface. That is not fully supported.\n");
skip_normal_probe:
/*workaround for switched interfaces */
- if (data_interface->cur_altsetting->desc.bInterfaceClass != CDC_DATA_INTERFACE_TYPE) {
- if (control_interface->cur_altsetting->desc.bInterfaceClass == CDC_DATA_INTERFACE_TYPE) {
+ if (data_interface->cur_altsetting->desc.bInterfaceClass
+ != CDC_DATA_INTERFACE_TYPE) {
+ if (control_interface->cur_altsetting->desc.bInterfaceClass
+ == CDC_DATA_INTERFACE_TYPE) {
struct usb_interface *t;
- dev_dbg(&intf->dev,"Your device has switched interfaces.\n");
-
+ dev_dbg(&intf->dev,
+ "Your device has switched interfaces.\n");
t = control_interface;
control_interface = data_interface;
data_interface = t;
@@ -1023,9 +1070,9 @@
/* Accept probe requests only for the control interface */
if (intf != control_interface)
return -ENODEV;
-
+
if (usb_interface_claimed(data_interface)) { /* valid in this context */
- dev_dbg(&intf->dev,"The data interface isn't available\n");
+ dev_dbg(&intf->dev, "The data interface isn't available\n");
return -EBUSY;
}
@@ -1042,8 +1089,8 @@
if (!usb_endpoint_dir_in(epread)) {
/* descriptors are swapped */
struct usb_endpoint_descriptor *t;
- dev_dbg(&intf->dev,"The data interface has switched endpoints\n");
-
+ dev_dbg(&intf->dev,
+ "The data interface has switched endpoints\n");
t = epread;
epread = epwrite;
epwrite = t;
@@ -1056,13 +1103,15 @@
return -ENODEV;
}
- if (!(acm = kzalloc(sizeof(struct acm), GFP_KERNEL))) {
+ acm = kzalloc(sizeof(struct acm), GFP_KERNEL);
+ if (acm == NULL) {
dev_dbg(&intf->dev, "out of memory (acm kzalloc)\n");
goto alloc_fail;
}
ctrlsize = le16_to_cpu(epctrl->wMaxPacketSize);
- readsize = le16_to_cpu(epread->wMaxPacketSize)* ( quirks == SINGLE_RX_URB ? 1 : 2);
+ readsize = le16_to_cpu(epread->wMaxPacketSize) *
+ (quirks == SINGLE_RX_URB ? 1 : 2);
acm->writesize = le16_to_cpu(epwrite->wMaxPacketSize) * 20;
acm->control = control_interface;
acm->data = data_interface;
@@ -1082,6 +1131,8 @@
spin_lock_init(&acm->read_lock);
mutex_init(&acm->mutex);
acm->rx_endpoint = usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress);
+ tty_port_init(&acm->port);
+ acm->port.ops = &acm_port_ops;
buf = usb_buffer_alloc(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma);
if (!buf) {
@@ -1103,8 +1154,10 @@
for (i = 0; i < num_rx_buf; i++) {
struct acm_ru *rcv = &(acm->ru[i]);
- if (!(rcv->urb = usb_alloc_urb(0, GFP_KERNEL))) {
- dev_dbg(&intf->dev, "out of memory (read urbs usb_alloc_urb)\n");
+ rcv->urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (rcv->urb == NULL) {
+ dev_dbg(&intf->dev,
+ "out of memory (read urbs usb_alloc_urb)\n");
goto alloc_fail7;
}
@@ -1117,26 +1170,29 @@
rb->base = usb_buffer_alloc(acm->dev, readsize,
GFP_KERNEL, &rb->dma);
if (!rb->base) {
- dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)\n");
+ dev_dbg(&intf->dev,
+ "out of memory (read bufs usb_buffer_alloc)\n");
goto alloc_fail7;
}
}
- for(i = 0; i < ACM_NW; i++)
- {
+ for (i = 0; i < ACM_NW; i++) {
struct acm_wb *snd = &(acm->wb[i]);
- if (!(snd->urb = usb_alloc_urb(0, GFP_KERNEL))) {
- dev_dbg(&intf->dev, "out of memory (write urbs usb_alloc_urb)");
+ snd->urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (snd->urb == NULL) {
+ dev_dbg(&intf->dev,
+ "out of memory (write urbs usb_alloc_urb)");
goto alloc_fail7;
}
- usb_fill_bulk_urb(snd->urb, usb_dev, usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
- NULL, acm->writesize, acm_write_bulk, snd);
+ usb_fill_bulk_urb(snd->urb, usb_dev,
+ usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
+ NULL, acm->writesize, acm_write_bulk, snd);
snd->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
snd->instance = acm;
}
- usb_set_intfdata (intf, acm);
+ usb_set_intfdata(intf, acm);
i = device_create_file(&intf->dev, &dev_attr_bmCapabilities);
if (i < 0)
@@ -1147,7 +1203,8 @@
if (!acm->country_codes)
goto skip_countries;
acm->country_code_size = cfd->bLength - 4;
- memcpy(acm->country_codes, (u8 *)&cfd->wCountyCode0, cfd->bLength - 4);
+ memcpy(acm->country_codes, (u8 *)&cfd->wCountyCode0,
+ cfd->bLength - 4);
acm->country_rel_date = cfd->iCountryCodeRelDate;
i = device_create_file(&intf->dev, &dev_attr_wCountryCodes);
@@ -1156,7 +1213,8 @@
goto skip_countries;
}
- i = device_create_file(&intf->dev, &dev_attr_iCountryCodeRelDate);
+ i = device_create_file(&intf->dev,
+ &dev_attr_iCountryCodeRelDate);
if (i < 0) {
kfree(acm->country_codes);
goto skip_countries;
@@ -1164,8 +1222,10 @@
}
skip_countries:
- usb_fill_int_urb(acm->ctrlurb, usb_dev, usb_rcvintpipe(usb_dev, epctrl->bEndpointAddress),
- acm->ctrl_buffer, ctrlsize, acm_ctrl_irq, acm, epctrl->bInterval);
+ usb_fill_int_urb(acm->ctrlurb, usb_dev,
+ usb_rcvintpipe(usb_dev, epctrl->bEndpointAddress),
+ acm->ctrl_buffer, ctrlsize, acm_ctrl_irq, acm,
+ epctrl->bInterval);
acm->ctrlurb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
acm->ctrlurb->transfer_dma = acm->ctrl_dma;
@@ -1212,7 +1272,7 @@
tasklet_disable(&acm->urb_task);
usb_kill_urb(acm->ctrlurb);
- for(i = 0; i < ACM_NW; i++)
+ for (i = 0; i < ACM_NW; i++)
usb_kill_urb(acm->wb[i].urb);
for (i = 0; i < acm->rx_buflimit; i++)
usb_kill_urb(acm->ru[i].urb);
@@ -1227,13 +1287,14 @@
{
struct acm *acm = usb_get_intfdata(intf);
struct usb_device *usb_dev = interface_to_usbdev(intf);
+ struct tty_struct *tty;
/* sibling interface is already cleaning up */
if (!acm)
return;
mutex_lock(&open_mutex);
- if (acm->country_codes){
+ if (acm->country_codes) {
device_remove_file(&acm->control->dev,
&dev_attr_wCountryCodes);
device_remove_file(&acm->control->dev,
@@ -1247,22 +1308,25 @@
stop_data_traffic(acm);
acm_write_buffers_free(acm);
- usb_buffer_free(usb_dev, acm->ctrlsize, acm->ctrl_buffer, acm->ctrl_dma);
+ usb_buffer_free(usb_dev, acm->ctrlsize, acm->ctrl_buffer,
+ acm->ctrl_dma);
acm_read_buffers_free(acm);
usb_driver_release_interface(&acm_driver, intf == acm->control ?
acm->data : acm->control);
- if (!acm->used) {
+ if (acm->port.count == 0) {
acm_tty_unregister(acm);
mutex_unlock(&open_mutex);
return;
}
mutex_unlock(&open_mutex);
-
- if (acm->tty)
- tty_hangup(acm->tty);
+ tty = tty_port_tty_get(&acm->port);
+ if (tty) {
+ tty_hangup(tty);
+ tty_kref_put(tty);
+ }
}
#ifdef CONFIG_PM
@@ -1297,7 +1361,7 @@
*/
mutex_lock(&acm->mutex);
- if (acm->used)
+ if (acm->port.count)
stop_data_traffic(acm);
mutex_unlock(&acm->mutex);
@@ -1319,7 +1383,7 @@
return 0;
mutex_lock(&acm->mutex);
- if (acm->used) {
+ if (acm->port.count) {
rv = usb_submit_urb(acm->ctrlurb, GFP_NOIO);
if (rv < 0)
goto err_out;
@@ -1398,7 +1462,7 @@
{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
USB_CDC_ACM_PROTO_AT_GSM) },
{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
- USB_CDC_ACM_PROTO_AT_3G ) },
+ USB_CDC_ACM_PROTO_AT_3G) },
{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
USB_CDC_ACM_PROTO_AT_CDMA) },
@@ -1406,7 +1470,7 @@
{ }
};
-MODULE_DEVICE_TABLE (usb, acm_ids);
+MODULE_DEVICE_TABLE(usb, acm_ids);
static struct usb_driver acm_driver = {
.name = "cdc_acm",
@@ -1429,6 +1493,7 @@
static const struct tty_operations acm_ops = {
.open = acm_tty_open,
.close = acm_tty_close,
+ .hangup = acm_tty_hangup,
.write = acm_tty_write,
.write_room = acm_tty_write_room,
.ioctl = acm_tty_ioctl,
@@ -1460,7 +1525,8 @@
acm_tty_driver->subtype = SERIAL_TYPE_NORMAL,
acm_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
acm_tty_driver->init_termios = tty_std_termios;
- acm_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ acm_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD |
+ HUPCL | CLOCAL;
tty_set_operations(acm_tty_driver, &acm_ops);
retval = tty_register_driver(acm_tty_driver);
@@ -1492,7 +1558,7 @@
module_init(acm_init);
module_exit(acm_exit);
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
MODULE_ALIAS_CHARDEV_MAJOR(ACM_TTY_MAJOR);
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index 1f95e7a..4c38564 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -89,8 +89,8 @@
struct usb_device *dev; /* the corresponding usb device */
struct usb_interface *control; /* control interface */
struct usb_interface *data; /* data interface */
- struct tty_struct *tty; /* the corresponding tty */
- struct urb *ctrlurb; /* urbs */
+ struct tty_port port; /* our tty port data */
+ struct urb *ctrlurb; /* urbs */
u8 *ctrl_buffer; /* buffers of urbs */
dma_addr_t ctrl_dma; /* dma handles of buffers */
u8 *country_codes; /* country codes from device */
@@ -120,7 +120,6 @@
unsigned int ctrlout; /* output control lines (DTR, RTS) */
unsigned int writesize; /* max packet size for the output bulk endpoint */
unsigned int readsize,ctrlsize; /* buffer sizes for freeing */
- unsigned int used; /* someone has this acm's device open */
unsigned int minor; /* acm minor number */
unsigned char throttle; /* throttled by tty layer */
unsigned char clocal; /* termios CLOCAL */
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index b7eacad..2bfd6dd 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -93,8 +93,7 @@
static void belkin_sa_shutdown(struct usb_serial *serial);
static int belkin_sa_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
-static void belkin_sa_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+static void belkin_sa_close(struct usb_serial_port *port);
static void belkin_sa_read_int_callback(struct urb *urb);
static void belkin_sa_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios * old);
@@ -244,8 +243,7 @@
} /* belkin_sa_open */
-static void belkin_sa_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void belkin_sa_close(struct usb_serial_port *port)
{
dbg("%s port %d", __func__, port->number);
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index ab4cc27..2830766 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -262,32 +262,40 @@
return r;
}
-static void ch341_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp)
+static int ch341_carrier_raised(struct usb_serial_port *port)
+{
+ struct ch341_private *priv = usb_get_serial_port_data(port);
+ if (priv->line_status & CH341_BIT_DCD)
+ return 1;
+ return 0;
+}
+
+static void ch341_dtr_rts(struct usb_serial_port *port, int on)
{
struct ch341_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
- unsigned int c_cflag;
dbg("%s - port %d", __func__, port->number);
+ /* drop DTR and RTS */
+ spin_lock_irqsave(&priv->lock, flags);
+ if (on)
+ priv->line_control |= CH341_BIT_RTS | CH341_BIT_DTR;
+ else
+ priv->line_control &= ~(CH341_BIT_RTS | CH341_BIT_DTR);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ ch341_set_handshake(port->serial->dev, priv->line_control);
+ wake_up_interruptible(&priv->delta_msr_wait);
+}
+
+static void ch341_close(struct usb_serial_port *port)
+{
+ dbg("%s - port %d", __func__, port->number);
/* shutdown our urbs */
dbg("%s - shutting down urbs", __func__);
usb_kill_urb(port->write_urb);
usb_kill_urb(port->read_urb);
usb_kill_urb(port->interrupt_in_urb);
-
- if (tty) {
- c_cflag = tty->termios->c_cflag;
- if (c_cflag & HUPCL) {
- /* drop DTR and RTS */
- spin_lock_irqsave(&priv->lock, flags);
- priv->line_control = 0;
- spin_unlock_irqrestore(&priv->lock, flags);
- ch341_set_handshake(port->serial->dev, 0);
- }
- }
- wake_up_interruptible(&priv->delta_msr_wait);
}
@@ -302,7 +310,6 @@
dbg("ch341_open()");
priv->baud_rate = DEFAULT_BAUD_RATE;
- priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
r = ch341_configure(serial->dev, priv);
if (r)
@@ -322,7 +329,7 @@
if (r) {
dev_err(&port->dev, "%s - failed submitting interrupt urb,"
" error %d\n", __func__, r);
- ch341_close(tty, port, NULL);
+ ch341_close(port);
return -EPROTO;
}
@@ -343,9 +350,6 @@
dbg("ch341_set_termios()");
- if (!tty || !tty->termios)
- return;
-
baud_rate = tty_get_baud_rate(tty);
priv->baud_rate = baud_rate;
@@ -568,6 +572,8 @@
.usb_driver = &ch341_driver,
.num_ports = 1,
.open = ch341_open,
+ .dtr_rts = ch341_dtr_rts,
+ .carrier_raised = ch341_carrier_raised,
.close = ch341_close,
.ioctl = ch341_ioctl,
.set_termios = ch341_set_termios,
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 19e2404..247b61b 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -169,7 +169,9 @@
kfree(tty);
}
}
-
+ /* So we know not to kill the hardware on a hangup on this
+ port. We have also bumped the use count by one so it won't go
+ idle */
port->console = 1;
retval = 0;
@@ -182,7 +184,7 @@
kfree(tty);
reset_open_count:
port->port.count = 0;
-goto out;
+ goto out;
}
static void usb_console_write(struct console *co,
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index e8d5133..16a154d 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -1,5 +1,5 @@
/*
- * Silicon Laboratories CP2101/CP2102 USB to RS232 serial adaptor driver
+ * Silicon Laboratories CP210x USB to RS232 serial adaptor driver
*
* Copyright (C) 2005 Craig Shelley (craig@microtron.org.uk)
*
@@ -27,44 +27,46 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v0.08"
-#define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver"
+#define DRIVER_VERSION "v0.09"
+#define DRIVER_DESC "Silicon Labs CP210x RS232 serial adaptor driver"
/*
* Function Prototypes
*/
-static int cp2101_open(struct tty_struct *, struct usb_serial_port *,
+static int cp210x_open(struct tty_struct *, struct usb_serial_port *,
struct file *);
-static void cp2101_cleanup(struct usb_serial_port *);
-static void cp2101_close(struct tty_struct *, struct usb_serial_port *,
- struct file*);
-static void cp2101_get_termios(struct tty_struct *,
+static void cp210x_cleanup(struct usb_serial_port *);
+static void cp210x_close(struct usb_serial_port *);
+static void cp210x_get_termios(struct tty_struct *,
struct usb_serial_port *port);
-static void cp2101_get_termios_port(struct usb_serial_port *port,
+static void cp210x_get_termios_port(struct usb_serial_port *port,
unsigned int *cflagp, unsigned int *baudp);
-static void cp2101_set_termios(struct tty_struct *, struct usb_serial_port *,
+static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *,
struct ktermios*);
-static int cp2101_tiocmget(struct tty_struct *, struct file *);
-static int cp2101_tiocmset(struct tty_struct *, struct file *,
+static int cp210x_tiocmget(struct tty_struct *, struct file *);
+static int cp210x_tiocmset(struct tty_struct *, struct file *,
unsigned int, unsigned int);
-static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *,
+static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *,
unsigned int, unsigned int);
-static void cp2101_break_ctl(struct tty_struct *, int);
-static int cp2101_startup(struct usb_serial *);
-static void cp2101_shutdown(struct usb_serial *);
+static void cp210x_break_ctl(struct tty_struct *, int);
+static int cp210x_startup(struct usb_serial *);
+static void cp210x_shutdown(struct usb_serial *);
static int debug;
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */
{ USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
+ { USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
+ { USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
{ USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
{ USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */
{ USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */
{ USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
{ USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
{ USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
+ { USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */
{ USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */
{ USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
{ USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
@@ -85,10 +87,12 @@
{ USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
+ { USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */
{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
{ USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
{ USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */
{ USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
+ { USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
{ USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
@@ -99,7 +103,9 @@
{ USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */
{ USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */
{ USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */
+ { USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */
{ USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
+ { USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
@@ -108,53 +114,70 @@
MODULE_DEVICE_TABLE(usb, id_table);
-static struct usb_driver cp2101_driver = {
- .name = "cp2101",
+static struct usb_driver cp210x_driver = {
+ .name = "cp210x",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.id_table = id_table,
.no_dynamic_id = 1,
};
-static struct usb_serial_driver cp2101_device = {
+static struct usb_serial_driver cp210x_device = {
.driver = {
.owner = THIS_MODULE,
- .name = "cp2101",
+ .name = "cp210x",
},
- .usb_driver = &cp2101_driver,
+ .usb_driver = &cp210x_driver,
.id_table = id_table,
.num_ports = 1,
- .open = cp2101_open,
- .close = cp2101_close,
- .break_ctl = cp2101_break_ctl,
- .set_termios = cp2101_set_termios,
- .tiocmget = cp2101_tiocmget,
- .tiocmset = cp2101_tiocmset,
- .attach = cp2101_startup,
- .shutdown = cp2101_shutdown,
+ .open = cp210x_open,
+ .close = cp210x_close,
+ .break_ctl = cp210x_break_ctl,
+ .set_termios = cp210x_set_termios,
+ .tiocmget = cp210x_tiocmget,
+ .tiocmset = cp210x_tiocmset,
+ .attach = cp210x_startup,
+ .shutdown = cp210x_shutdown,
};
/* Config request types */
#define REQTYPE_HOST_TO_DEVICE 0x41
#define REQTYPE_DEVICE_TO_HOST 0xc1
-/* Config SET requests. To GET, add 1 to the request number */
-#define CP2101_UART 0x00 /* Enable / Disable */
-#define CP2101_BAUDRATE 0x01 /* (BAUD_RATE_GEN_FREQ / baudrate) */
-#define CP2101_BITS 0x03 /* 0x(0)(databits)(parity)(stopbits) */
-#define CP2101_BREAK 0x05 /* On / Off */
-#define CP2101_CONTROL 0x07 /* Flow control line states */
-#define CP2101_MODEMCTL 0x13 /* Modem controls */
-#define CP2101_CONFIG_6 0x19 /* 6 bytes of config data ??? */
+/* Config request codes */
+#define CP210X_IFC_ENABLE 0x00
+#define CP210X_SET_BAUDDIV 0x01
+#define CP210X_GET_BAUDDIV 0x02
+#define CP210X_SET_LINE_CTL 0x03
+#define CP210X_GET_LINE_CTL 0x04
+#define CP210X_SET_BREAK 0x05
+#define CP210X_IMM_CHAR 0x06
+#define CP210X_SET_MHS 0x07
+#define CP210X_GET_MDMSTS 0x08
+#define CP210X_SET_XON 0x09
+#define CP210X_SET_XOFF 0x0A
+#define CP210X_SET_EVENTMASK 0x0B
+#define CP210X_GET_EVENTMASK 0x0C
+#define CP210X_SET_CHAR 0x0D
+#define CP210X_GET_CHARS 0x0E
+#define CP210X_GET_PROPS 0x0F
+#define CP210X_GET_COMM_STATUS 0x10
+#define CP210X_RESET 0x11
+#define CP210X_PURGE 0x12
+#define CP210X_SET_FLOW 0x13
+#define CP210X_GET_FLOW 0x14
+#define CP210X_EMBED_EVENTS 0x15
+#define CP210X_GET_EVENTSTATE 0x16
+#define CP210X_SET_CHARS 0x19
-/* CP2101_UART */
+/* CP210X_IFC_ENABLE */
#define UART_ENABLE 0x0001
#define UART_DISABLE 0x0000
-/* CP2101_BAUDRATE */
+/* CP210X_(SET|GET)_BAUDDIV */
#define BAUD_RATE_GEN_FREQ 0x384000
-/* CP2101_BITS */
+/* CP210X_(SET|GET)_LINE_CTL */
#define BITS_DATA_MASK 0X0f00
#define BITS_DATA_5 0X0500
#define BITS_DATA_6 0X0600
@@ -174,11 +197,11 @@
#define BITS_STOP_1_5 0x0001
#define BITS_STOP_2 0x0002
-/* CP2101_BREAK */
+/* CP210X_SET_BREAK */
#define BREAK_ON 0x0000
#define BREAK_OFF 0x0001
-/* CP2101_CONTROL */
+/* CP210X_(SET_MHS|GET_MDMSTS) */
#define CONTROL_DTR 0x0001
#define CONTROL_RTS 0x0002
#define CONTROL_CTS 0x0010
@@ -189,13 +212,13 @@
#define CONTROL_WRITE_RTS 0x0200
/*
- * cp2101_get_config
- * Reads from the CP2101 configuration registers
+ * cp210x_get_config
+ * Reads from the CP210x configuration registers
* 'size' is specified in bytes.
* 'data' is a pointer to a pre-allocated array of integers large
* enough to hold 'size' bytes (with 4 bytes to each integer)
*/
-static int cp2101_get_config(struct usb_serial_port *port, u8 request,
+static int cp210x_get_config(struct usb_serial_port *port, u8 request,
unsigned int *data, int size)
{
struct usb_serial *serial = port->serial;
@@ -211,9 +234,6 @@
return -ENOMEM;
}
- /* For get requests, the request number must be incremented */
- request++;
-
/* Issue the request, attempting to read 'size' bytes */
result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
request, REQTYPE_DEVICE_TO_HOST, 0x0000,
@@ -236,12 +256,12 @@
}
/*
- * cp2101_set_config
- * Writes to the CP2101 configuration registers
+ * cp210x_set_config
+ * Writes to the CP210x configuration registers
* Values less than 16 bits wide are sent directly
* 'size' is specified in bytes.
*/
-static int cp2101_set_config(struct usb_serial_port *port, u8 request,
+static int cp210x_set_config(struct usb_serial_port *port, u8 request,
unsigned int *data, int size)
{
struct usb_serial *serial = port->serial;
@@ -292,21 +312,21 @@
}
/*
- * cp2101_set_config_single
- * Convenience function for calling cp2101_set_config on single data values
+ * cp210x_set_config_single
+ * Convenience function for calling cp210x_set_config on single data values
* without requiring an integer pointer
*/
-static inline int cp2101_set_config_single(struct usb_serial_port *port,
+static inline int cp210x_set_config_single(struct usb_serial_port *port,
u8 request, unsigned int data)
{
- return cp2101_set_config(port, request, &data, 2);
+ return cp210x_set_config(port, request, &data, 2);
}
/*
- * cp2101_quantise_baudrate
+ * cp210x_quantise_baudrate
* Quantises the baud rate as per AN205 Table 1
*/
-static unsigned int cp2101_quantise_baudrate(unsigned int baud) {
+static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
if (baud <= 56) baud = 0;
else if (baud <= 300) baud = 300;
else if (baud <= 600) baud = 600;
@@ -343,7 +363,7 @@
return baud;
}
-static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port,
+static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port,
struct file *filp)
{
struct usb_serial *serial = port->serial;
@@ -351,7 +371,7 @@
dbg("%s - port %d", __func__, port->number);
- if (cp2101_set_config_single(port, CP2101_UART, UART_ENABLE)) {
+ if (cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_ENABLE)) {
dev_err(&port->dev, "%s - Unable to enable UART\n",
__func__);
return -EPROTO;
@@ -373,17 +393,17 @@
}
/* Configure the termios structure */
- cp2101_get_termios(tty, port);
+ cp210x_get_termios(tty, port);
/* Set the DTR and RTS pins low */
- cp2101_tiocmset_port(tty ? (struct usb_serial_port *) tty->driver_data
+ cp210x_tiocmset_port(tty ? (struct usb_serial_port *) tty->driver_data
: port,
NULL, TIOCM_DTR | TIOCM_RTS, 0);
return 0;
}
-static void cp2101_cleanup(struct usb_serial_port *port)
+static void cp210x_cleanup(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
@@ -398,8 +418,7 @@
}
}
-static void cp2101_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp)
+static void cp210x_close(struct usb_serial_port *port)
{
dbg("%s - port %d", __func__, port->number);
@@ -410,23 +429,23 @@
mutex_lock(&port->serial->disc_mutex);
if (!port->serial->disconnected)
- cp2101_set_config_single(port, CP2101_UART, UART_DISABLE);
+ cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE);
mutex_unlock(&port->serial->disc_mutex);
}
/*
- * cp2101_get_termios
+ * cp210x_get_termios
* Reads the baud rate, data bits, parity, stop bits and flow control mode
* from the device, corrects any unsupported values, and configures the
* termios structure to reflect the state of the device
*/
-static void cp2101_get_termios(struct tty_struct *tty,
+static void cp210x_get_termios(struct tty_struct *tty,
struct usb_serial_port *port)
{
unsigned int baud;
if (tty) {
- cp2101_get_termios_port(tty->driver_data,
+ cp210x_get_termios_port(tty->driver_data,
&tty->termios->c_cflag, &baud);
tty_encode_baud_rate(tty, baud, baud);
}
@@ -434,15 +453,15 @@
else {
unsigned int cflag;
cflag = 0;
- cp2101_get_termios_port(port, &cflag, &baud);
+ cp210x_get_termios_port(port, &cflag, &baud);
}
}
/*
- * cp2101_get_termios_port
- * This is the heart of cp2101_get_termios which always uses a &usb_serial_port.
+ * cp210x_get_termios_port
+ * This is the heart of cp210x_get_termios which always uses a &usb_serial_port.
*/
-static void cp2101_get_termios_port(struct usb_serial_port *port,
+static void cp210x_get_termios_port(struct usb_serial_port *port,
unsigned int *cflagp, unsigned int *baudp)
{
unsigned int cflag, modem_ctl[4];
@@ -451,17 +470,17 @@
dbg("%s - port %d", __func__, port->number);
- cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2);
+ cp210x_get_config(port, CP210X_GET_BAUDDIV, &baud, 2);
/* Convert to baudrate */
if (baud)
- baud = cp2101_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud);
+ baud = cp210x_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud);
dbg("%s - baud rate = %d", __func__, baud);
*baudp = baud;
cflag = *cflagp;
- cp2101_get_config(port, CP2101_BITS, &bits, 2);
+ cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
cflag &= ~CSIZE;
switch (bits & BITS_DATA_MASK) {
case BITS_DATA_5:
@@ -486,14 +505,14 @@
cflag |= CS8;
bits &= ~BITS_DATA_MASK;
bits |= BITS_DATA_8;
- cp2101_set_config(port, CP2101_BITS, &bits, 2);
+ cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
break;
default:
dbg("%s - Unknown number of data bits, using 8", __func__);
cflag |= CS8;
bits &= ~BITS_DATA_MASK;
bits |= BITS_DATA_8;
- cp2101_set_config(port, CP2101_BITS, &bits, 2);
+ cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
break;
}
@@ -516,20 +535,20 @@
__func__);
cflag &= ~PARENB;
bits &= ~BITS_PARITY_MASK;
- cp2101_set_config(port, CP2101_BITS, &bits, 2);
+ cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
break;
case BITS_PARITY_SPACE:
dbg("%s - parity = SPACE (not supported, disabling parity)",
__func__);
cflag &= ~PARENB;
bits &= ~BITS_PARITY_MASK;
- cp2101_set_config(port, CP2101_BITS, &bits, 2);
+ cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
break;
default:
dbg("%s - Unknown parity mode, disabling parity", __func__);
cflag &= ~PARENB;
bits &= ~BITS_PARITY_MASK;
- cp2101_set_config(port, CP2101_BITS, &bits, 2);
+ cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
break;
}
@@ -542,7 +561,7 @@
dbg("%s - stop bits = 1.5 (not supported, using 1 stop bit)",
__func__);
bits &= ~BITS_STOP_MASK;
- cp2101_set_config(port, CP2101_BITS, &bits, 2);
+ cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
break;
case BITS_STOP_2:
dbg("%s - stop bits = 2", __func__);
@@ -552,11 +571,11 @@
dbg("%s - Unknown number of stop bits, using 1 stop bit",
__func__);
bits &= ~BITS_STOP_MASK;
- cp2101_set_config(port, CP2101_BITS, &bits, 2);
+ cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
break;
}
- cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+ cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16);
if (modem_ctl[0] & 0x0008) {
dbg("%s - flow control = CRTSCTS", __func__);
cflag |= CRTSCTS;
@@ -568,7 +587,7 @@
*cflagp = cflag;
}
-static void cp2101_set_termios(struct tty_struct *tty,
+static void cp210x_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
unsigned int cflag, old_cflag;
@@ -583,13 +602,13 @@
tty->termios->c_cflag &= ~CMSPAR;
cflag = tty->termios->c_cflag;
old_cflag = old_termios->c_cflag;
- baud = cp2101_quantise_baudrate(tty_get_baud_rate(tty));
+ baud = cp210x_quantise_baudrate(tty_get_baud_rate(tty));
/* If the baud rate is to be updated*/
if (baud != tty_termios_baud_rate(old_termios) && baud != 0) {
dbg("%s - Setting baud rate to %d baud", __func__,
baud);
- if (cp2101_set_config_single(port, CP2101_BAUDRATE,
+ if (cp210x_set_config_single(port, CP210X_SET_BAUDDIV,
((BAUD_RATE_GEN_FREQ + baud/2) / baud))) {
dbg("Baud rate requested not supported by device\n");
baud = tty_termios_baud_rate(old_termios);
@@ -600,7 +619,7 @@
/* If the number of data bits is to be updated */
if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
- cp2101_get_config(port, CP2101_BITS, &bits, 2);
+ cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
bits &= ~BITS_DATA_MASK;
switch (cflag & CSIZE) {
case CS5:
@@ -624,19 +643,19 @@
dbg("%s - data bits = 9", __func__);
break;*/
default:
- dbg("cp2101 driver does not "
+ dbg("cp210x driver does not "
"support the number of bits requested,"
" using 8 bit mode\n");
bits |= BITS_DATA_8;
break;
}
- if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
+ if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
dbg("Number of data bits requested "
"not supported by device\n");
}
if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))) {
- cp2101_get_config(port, CP2101_BITS, &bits, 2);
+ cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
bits &= ~BITS_PARITY_MASK;
if (cflag & PARENB) {
if (cflag & PARODD) {
@@ -647,13 +666,13 @@
dbg("%s - parity = EVEN", __func__);
}
}
- if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
+ if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
dbg("Parity mode not supported "
"by device\n");
}
if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
- cp2101_get_config(port, CP2101_BITS, &bits, 2);
+ cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
bits &= ~BITS_STOP_MASK;
if (cflag & CSTOPB) {
bits |= BITS_STOP_2;
@@ -662,13 +681,13 @@
bits |= BITS_STOP_1;
dbg("%s - stop bits = 1", __func__);
}
- if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
+ if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
dbg("Number of stop bits requested "
"not supported by device\n");
}
if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
- cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+ cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16);
dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
__func__, modem_ctl[0], modem_ctl[1],
modem_ctl[2], modem_ctl[3]);
@@ -688,19 +707,19 @@
dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
__func__, modem_ctl[0], modem_ctl[1],
modem_ctl[2], modem_ctl[3]);
- cp2101_set_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+ cp210x_set_config(port, CP210X_SET_FLOW, modem_ctl, 16);
}
}
-static int cp2101_tiocmset (struct tty_struct *tty, struct file *file,
+static int cp210x_tiocmset (struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
- return cp2101_tiocmset_port(port, file, set, clear);
+ return cp210x_tiocmset_port(port, file, set, clear);
}
-static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *file,
+static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *file,
unsigned int set, unsigned int clear)
{
unsigned int control = 0;
@@ -726,10 +745,10 @@
dbg("%s - control = 0x%.4x", __func__, control);
- return cp2101_set_config(port, CP2101_CONTROL, &control, 2);
+ return cp210x_set_config(port, CP210X_SET_MHS, &control, 2);
}
-static int cp2101_tiocmget (struct tty_struct *tty, struct file *file)
+static int cp210x_tiocmget (struct tty_struct *tty, struct file *file)
{
struct usb_serial_port *port = tty->driver_data;
unsigned int control;
@@ -737,7 +756,7 @@
dbg("%s - port %d", __func__, port->number);
- cp2101_get_config(port, CP2101_CONTROL, &control, 1);
+ cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1);
result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
|((control & CONTROL_RTS) ? TIOCM_RTS : 0)
@@ -751,7 +770,7 @@
return result;
}
-static void cp2101_break_ctl (struct tty_struct *tty, int break_state)
+static void cp210x_break_ctl (struct tty_struct *tty, int break_state)
{
struct usb_serial_port *port = tty->driver_data;
unsigned int state;
@@ -763,17 +782,17 @@
state = BREAK_ON;
dbg("%s - turning break %s", __func__,
state == BREAK_OFF ? "off" : "on");
- cp2101_set_config(port, CP2101_BREAK, &state, 2);
+ cp210x_set_config(port, CP210X_SET_BREAK, &state, 2);
}
-static int cp2101_startup(struct usb_serial *serial)
+static int cp210x_startup(struct usb_serial *serial)
{
- /* CP2101 buffers behave strangely unless device is reset */
+ /* cp210x buffers behave strangely unless device is reset */
usb_reset_device(serial->dev);
return 0;
}
-static void cp2101_shutdown(struct usb_serial *serial)
+static void cp210x_shutdown(struct usb_serial *serial)
{
int i;
@@ -781,21 +800,21 @@
/* Stop reads and writes on all ports */
for (i = 0; i < serial->num_ports; ++i)
- cp2101_cleanup(serial->port[i]);
+ cp210x_cleanup(serial->port[i]);
}
-static int __init cp2101_init(void)
+static int __init cp210x_init(void)
{
int retval;
- retval = usb_serial_register(&cp2101_device);
+ retval = usb_serial_register(&cp210x_device);
if (retval)
return retval; /* Failed to register */
- retval = usb_register(&cp2101_driver);
+ retval = usb_register(&cp210x_driver);
if (retval) {
/* Failed to register */
- usb_serial_deregister(&cp2101_device);
+ usb_serial_deregister(&cp210x_device);
return retval;
}
@@ -805,14 +824,14 @@
return 0;
}
-static void __exit cp2101_exit(void)
+static void __exit cp210x_exit(void)
{
- usb_deregister(&cp2101_driver);
- usb_serial_deregister(&cp2101_device);
+ usb_deregister(&cp210x_driver);
+ usb_serial_deregister(&cp210x_device);
}
-module_init(cp2101_init);
-module_exit(cp2101_exit);
+module_init(cp210x_init);
+module_exit(cp210x_exit);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_VERSION(DRIVER_VERSION);
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index dd501bb..933ba91 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -61,8 +61,7 @@
static void cyberjack_shutdown(struct usb_serial *serial);
static int cyberjack_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
-static void cyberjack_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+static void cyberjack_close(struct usb_serial_port *port);
static int cyberjack_write(struct tty_struct *tty,
struct usb_serial_port *port, const unsigned char *buf, int count);
static int cyberjack_write_room(struct tty_struct *tty);
@@ -185,8 +184,7 @@
return result;
}
-static void cyberjack_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void cyberjack_close(struct usb_serial_port *port)
{
dbg("%s - port %d", __func__, port->number);
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index e568710..669f938 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -174,8 +174,8 @@
static void cypress_shutdown(struct usb_serial *serial);
static int cypress_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
-static void cypress_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+static void cypress_close(struct usb_serial_port *port);
+static void cypress_dtr_rts(struct usb_serial_port *port, int on);
static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
static void cypress_send(struct usb_serial_port *port);
@@ -218,6 +218,7 @@
.shutdown = cypress_shutdown,
.open = cypress_open,
.close = cypress_close,
+ .dtr_rts = cypress_dtr_rts,
.write = cypress_write,
.write_room = cypress_write_room,
.ioctl = cypress_ioctl,
@@ -244,6 +245,7 @@
.shutdown = cypress_shutdown,
.open = cypress_open,
.close = cypress_close,
+ .dtr_rts = cypress_dtr_rts,
.write = cypress_write,
.write_room = cypress_write_room,
.ioctl = cypress_ioctl,
@@ -270,6 +272,7 @@
.shutdown = cypress_shutdown,
.open = cypress_open,
.close = cypress_close,
+ .dtr_rts = cypress_dtr_rts,
.write = cypress_write,
.write_room = cypress_write_room,
.ioctl = cypress_ioctl,
@@ -656,11 +659,7 @@
priv->rx_flags = 0;
spin_unlock_irqrestore(&priv->lock, flags);
- /* raise both lines and set termios */
- spin_lock_irqsave(&priv->lock, flags);
- priv->line_control = CONTROL_DTR | CONTROL_RTS;
- priv->cmd_ctrl = 1;
- spin_unlock_irqrestore(&priv->lock, flags);
+ /* Set termios */
result = cypress_write(tty, port, NULL, 0);
if (result) {
@@ -694,76 +693,42 @@
__func__, result);
cypress_set_dead(port);
}
-
+ port->port.drain_delay = 256;
return result;
} /* cypress_open */
-
-static void cypress_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void cypress_dtr_rts(struct usb_serial_port *port, int on)
{
struct cypress_private *priv = usb_get_serial_port_data(port);
- unsigned int c_cflag;
- int bps;
- long timeout;
- wait_queue_t wait;
+ /* drop dtr and rts */
+ priv = usb_get_serial_port_data(port);
+ spin_lock_irq(&priv->lock);
+ if (on == 0)
+ priv->line_control = 0;
+ else
+ priv->line_control = CONTROL_DTR | CONTROL_RTS;
+ priv->cmd_ctrl = 1;
+ spin_unlock_irq(&priv->lock);
+ cypress_write(NULL, port, NULL, 0);
+}
+
+static void cypress_close(struct usb_serial_port *port)
+{
+ struct cypress_private *priv = usb_get_serial_port_data(port);
dbg("%s - port %d", __func__, port->number);
- /* wait for data to drain from buffer */
- spin_lock_irq(&priv->lock);
- timeout = CYPRESS_CLOSING_WAIT;
- init_waitqueue_entry(&wait, current);
- add_wait_queue(&tty->write_wait, &wait);
- for (;;) {
- set_current_state(TASK_INTERRUPTIBLE);
- if (cypress_buf_data_avail(priv->buf) == 0
- || timeout == 0 || signal_pending(current)
- /* without mutex, allowed due to harmless failure mode */
- || port->serial->disconnected)
- break;
- spin_unlock_irq(&priv->lock);
- timeout = schedule_timeout(timeout);
- spin_lock_irq(&priv->lock);
- }
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&tty->write_wait, &wait);
- /* clear out any remaining data in the buffer */
- cypress_buf_clear(priv->buf);
- spin_unlock_irq(&priv->lock);
-
/* writing is potentially harmful, lock must be taken */
mutex_lock(&port->serial->disc_mutex);
if (port->serial->disconnected) {
mutex_unlock(&port->serial->disc_mutex);
return;
}
- /* wait for characters to drain from device */
- if (tty) {
- bps = tty_get_baud_rate(tty);
- if (bps > 1200)
- timeout = max((HZ * 2560) / bps, HZ / 10);
- else
- timeout = 2 * HZ;
- schedule_timeout_interruptible(timeout);
- }
-
+ cypress_buf_clear(priv->buf);
dbg("%s - stopping urbs", __func__);
usb_kill_urb(port->interrupt_in_urb);
usb_kill_urb(port->interrupt_out_urb);
- if (tty) {
- c_cflag = tty->termios->c_cflag;
- if (c_cflag & HUPCL) {
- /* drop dtr and rts */
- priv = usb_get_serial_port_data(port);
- spin_lock_irq(&priv->lock);
- priv->line_control = 0;
- priv->cmd_ctrl = 1;
- spin_unlock_irq(&priv->lock);
- cypress_write(tty, port, NULL, 0);
- }
- }
if (stats)
dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 38ba4ea..30f5140 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -422,7 +422,6 @@
int dp_throttled;
int dp_throttle_restart;
wait_queue_head_t dp_flush_wait;
- int dp_in_close; /* close in progress */
wait_queue_head_t dp_close_wait; /* wait queue for close */
struct work_struct dp_wakeup_work;
struct usb_serial_port *dp_port;
@@ -456,8 +455,9 @@
static int digi_chars_in_buffer(struct tty_struct *tty);
static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
struct file *filp);
-static void digi_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp);
+static void digi_close(struct usb_serial_port *port);
+static int digi_carrier_raised(struct usb_serial_port *port);
+static void digi_dtr_rts(struct usb_serial_port *port, int on);
static int digi_startup_device(struct usb_serial *serial);
static int digi_startup(struct usb_serial *serial);
static void digi_shutdown(struct usb_serial *serial);
@@ -510,6 +510,8 @@
.num_ports = 3,
.open = digi_open,
.close = digi_close,
+ .dtr_rts = digi_dtr_rts,
+ .carrier_raised = digi_carrier_raised,
.write = digi_write,
.write_room = digi_write_room,
.write_bulk_callback = digi_write_bulk_callback,
@@ -1328,6 +1330,19 @@
}
+static void digi_dtr_rts(struct usb_serial_port *port, int on)
+{
+ /* Adjust DTR and RTS */
+ digi_set_modem_signals(port, on * (TIOCM_DTR|TIOCM_RTS), 1);
+}
+
+static int digi_carrier_raised(struct usb_serial_port *port)
+{
+ struct digi_port *priv = usb_get_serial_port_data(port);
+ if (priv->dp_modem_signals & TIOCM_CD)
+ return 1;
+ return 0;
+}
static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
struct file *filp)
@@ -1336,7 +1351,6 @@
unsigned char buf[32];
struct digi_port *priv = usb_get_serial_port_data(port);
struct ktermios not_termios;
- unsigned long flags = 0;
dbg("digi_open: TOP: port=%d, open_count=%d",
priv->dp_port_num, port->port.count);
@@ -1345,26 +1359,6 @@
if (digi_startup_device(port->serial) != 0)
return -ENXIO;
- spin_lock_irqsave(&priv->dp_port_lock, flags);
-
- /* don't wait on a close in progress for non-blocking opens */
- if (priv->dp_in_close && (filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0) {
- spin_unlock_irqrestore(&priv->dp_port_lock, flags);
- return -EAGAIN;
- }
-
- /* wait for a close in progress to finish */
- while (priv->dp_in_close) {
- cond_wait_interruptible_timeout_irqrestore(
- &priv->dp_close_wait, DIGI_RETRY_TIMEOUT,
- &priv->dp_port_lock, flags);
- if (signal_pending(current))
- return -EINTR;
- spin_lock_irqsave(&priv->dp_port_lock, flags);
- }
-
- spin_unlock_irqrestore(&priv->dp_port_lock, flags);
-
/* read modem signals automatically whenever they change */
buf[0] = DIGI_CMD_READ_INPUT_SIGNALS;
buf[1] = priv->dp_port_num;
@@ -1387,16 +1381,11 @@
not_termios.c_iflag = ~tty->termios->c_iflag;
digi_set_termios(tty, port, ¬_termios);
}
-
- /* set DTR and RTS */
- digi_set_modem_signals(port, TIOCM_DTR|TIOCM_RTS, 1);
-
return 0;
}
-static void digi_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp)
+static void digi_close(struct usb_serial_port *port)
{
DEFINE_WAIT(wait);
int ret;
@@ -1411,28 +1400,9 @@
if (port->serial->disconnected)
goto exit;
- /* do cleanup only after final close on this port */
- spin_lock_irq(&priv->dp_port_lock);
- priv->dp_in_close = 1;
- spin_unlock_irq(&priv->dp_port_lock);
-
- /* tell line discipline to process only XON/XOFF */
- tty->closing = 1;
-
- /* wait for output to drain */
- if ((filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0)
- tty_wait_until_sent(tty, DIGI_CLOSE_TIMEOUT);
-
- /* flush driver and line discipline buffers */
- tty_driver_flush_buffer(tty);
- tty_ldisc_flush(tty);
-
if (port->serial->dev) {
- /* wait for transmit idle */
- if ((filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0)
- digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT);
- /* drop DTR and RTS */
- digi_set_modem_signals(port, 0, 0);
+ /* FIXME: Transmit idle belongs in the wait_unti_sent path */
+ digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT);
/* disable input flow control */
buf[0] = DIGI_CMD_SET_INPUT_FLOW_CONTROL;
@@ -1477,11 +1447,9 @@
/* shutdown any outstanding bulk writes */
usb_kill_urb(port->write_urb);
}
- tty->closing = 0;
exit:
spin_lock_irq(&priv->dp_port_lock);
priv->dp_write_urb_in_use = 0;
- priv->dp_in_close = 0;
wake_up_interruptible(&priv->dp_close_wait);
spin_unlock_irq(&priv->dp_port_lock);
mutex_unlock(&port->serial->disc_mutex);
@@ -1560,7 +1528,6 @@
priv->dp_throttled = 0;
priv->dp_throttle_restart = 0;
init_waitqueue_head(&priv->dp_flush_wait);
- priv->dp_in_close = 0;
init_waitqueue_head(&priv->dp_close_wait);
INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock);
priv->dp_port = serial->port[i];
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index c709ec4..2b141cc 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -81,8 +81,7 @@
/* function prototypes for an empeg-car player */
static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port,
struct file *filp);
-static void empeg_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp);
+static void empeg_close(struct usb_serial_port *port);
static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf,
int count);
@@ -181,8 +180,7 @@
}
-static void empeg_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp)
+static void empeg_close(struct usb_serial_port *port)
{
dbg("%s - port %d", __func__, port->number);
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index d9fcdae..683304d 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -89,6 +89,7 @@
int force_rtscts; /* if non-zero, force RTS-CTS to always
be enabled */
+ unsigned int latency; /* latency setting in use */
spinlock_t tx_lock; /* spinlock for transmit state */
unsigned long tx_bytes;
unsigned long tx_outstanding_bytes;
@@ -719,8 +720,8 @@
static int ftdi_sio_port_remove(struct usb_serial_port *port);
static int ftdi_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
-static void ftdi_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+static void ftdi_close(struct usb_serial_port *port);
+static void ftdi_dtr_rts(struct usb_serial_port *port, int on);
static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
static int ftdi_write_room(struct tty_struct *tty);
@@ -758,6 +759,7 @@
.port_remove = ftdi_sio_port_remove,
.open = ftdi_open,
.close = ftdi_close,
+ .dtr_rts = ftdi_dtr_rts,
.throttle = ftdi_throttle,
.unthrottle = ftdi_unthrottle,
.write = ftdi_write,
@@ -1037,7 +1039,54 @@
return rv;
}
+static int write_latency_timer(struct usb_serial_port *port)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ struct usb_device *udev = port->serial->dev;
+ char buf[1];
+ int rv = 0;
+ int l = priv->latency;
+ if (priv->flags & ASYNC_LOW_LATENCY)
+ l = 1;
+
+ dbg("%s: setting latency timer = %i", __func__, l);
+
+ rv = usb_control_msg(udev,
+ usb_sndctrlpipe(udev, 0),
+ FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
+ FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
+ l, priv->interface,
+ buf, 0, WDR_TIMEOUT);
+
+ if (rv < 0)
+ dev_err(&port->dev, "Unable to write latency timer: %i\n", rv);
+ return rv;
+}
+
+static int read_latency_timer(struct usb_serial_port *port)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ struct usb_device *udev = port->serial->dev;
+ unsigned short latency = 0;
+ int rv = 0;
+
+
+ dbg("%s", __func__);
+
+ rv = usb_control_msg(udev,
+ usb_rcvctrlpipe(udev, 0),
+ FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
+ FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
+ 0, priv->interface,
+ (char *) &latency, 1, WDR_TIMEOUT);
+
+ if (rv < 0) {
+ dev_err(&port->dev, "Unable to read latency timer: %i\n", rv);
+ return -EIO;
+ }
+ return latency;
+}
static int get_serial_info(struct usb_serial_port *port,
struct serial_struct __user *retinfo)
@@ -1097,6 +1146,7 @@
priv->custom_divisor = new_serial.custom_divisor;
tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ write_latency_timer(port);
check_and_exit:
if ((old_priv.flags & ASYNC_SPD_MASK) !=
@@ -1192,27 +1242,13 @@
{
struct usb_serial_port *port = to_usb_serial_port(dev);
struct ftdi_private *priv = usb_get_serial_port_data(port);
- struct usb_device *udev = port->serial->dev;
- unsigned short latency = 0;
- int rv = 0;
-
-
- dbg("%s", __func__);
-
- rv = usb_control_msg(udev,
- usb_rcvctrlpipe(udev, 0),
- FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
- FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
- 0, priv->interface,
- (char *) &latency, 1, WDR_TIMEOUT);
-
- if (rv < 0) {
- dev_err(dev, "Unable to read latency timer: %i\n", rv);
- return -EIO;
- }
- return sprintf(buf, "%i\n", latency);
+ if (priv->flags & ASYNC_LOW_LATENCY)
+ return sprintf(buf, "1\n");
+ else
+ return sprintf(buf, "%i\n", priv->latency);
}
+
/* Write a new value of the latency timer, in units of milliseconds. */
static ssize_t store_latency_timer(struct device *dev,
struct device_attribute *attr, const char *valbuf,
@@ -1220,25 +1256,13 @@
{
struct usb_serial_port *port = to_usb_serial_port(dev);
struct ftdi_private *priv = usb_get_serial_port_data(port);
- struct usb_device *udev = port->serial->dev;
- char buf[1];
int v = simple_strtoul(valbuf, NULL, 10);
int rv = 0;
- dbg("%s: setting latency timer = %i", __func__, v);
-
- rv = usb_control_msg(udev,
- usb_sndctrlpipe(udev, 0),
- FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
- FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
- v, priv->interface,
- buf, 0, WDR_TIMEOUT);
-
- if (rv < 0) {
- dev_err(dev, "Unable to write latency timer: %i\n", rv);
+ priv->latency = v;
+ rv = write_latency_timer(port);
+ if (rv < 0)
return -EIO;
- }
-
return count;
}
@@ -1392,6 +1416,7 @@
usb_set_serial_port_data(port, priv);
ftdi_determine_type(port);
+ read_latency_timer(port);
create_sysfs_attrs(port);
return 0;
}
@@ -1514,6 +1539,8 @@
if (tty)
tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ write_latency_timer(port);
+
/* No error checking for this (will get errors later anyway) */
/* See ftdi_sio.h for description of what is reset */
usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
@@ -1529,11 +1556,6 @@
if (tty)
ftdi_set_termios(tty, port, tty->termios);
- /* FIXME: Flow control might be enabled, so it should be checked -
- we have no control of defaults! */
- /* Turn on RTS and DTR since we are not flow controlling by default */
- set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
-
/* Not throttled */
spin_lock_irqsave(&priv->rx_lock, flags);
priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
@@ -1558,6 +1580,30 @@
} /* ftdi_open */
+static void ftdi_dtr_rts(struct usb_serial_port *port, int on)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ char buf[1];
+
+ mutex_lock(&port->serial->disc_mutex);
+ if (!port->serial->disconnected) {
+ /* Disable flow control */
+ if (!on && usb_control_msg(port->serial->dev,
+ usb_sndctrlpipe(port->serial->dev, 0),
+ FTDI_SIO_SET_FLOW_CTRL_REQUEST,
+ FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
+ 0, priv->interface, buf, 0,
+ WDR_TIMEOUT) < 0) {
+ dev_err(&port->dev, "error from flowcontrol urb\n");
+ }
+ /* drop RTS and DTR */
+ if (on)
+ set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+ else
+ clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+ }
+ mutex_unlock(&port->serial->disc_mutex);
+}
/*
* usbserial:__serial_close only calls ftdi_close if the point is open
@@ -1567,31 +1613,12 @@
*
*/
-static void ftdi_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void ftdi_close(struct usb_serial_port *port)
{ /* ftdi_close */
- unsigned int c_cflag = tty->termios->c_cflag;
struct ftdi_private *priv = usb_get_serial_port_data(port);
- char buf[1];
dbg("%s", __func__);
- mutex_lock(&port->serial->disc_mutex);
- if (c_cflag & HUPCL && !port->serial->disconnected) {
- /* Disable flow control */
- if (usb_control_msg(port->serial->dev,
- usb_sndctrlpipe(port->serial->dev, 0),
- FTDI_SIO_SET_FLOW_CTRL_REQUEST,
- FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
- 0, priv->interface, buf, 0,
- WDR_TIMEOUT) < 0) {
- dev_err(&port->dev, "error from flowcontrol urb\n");
- }
-
- /* drop RTS and DTR */
- clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
- } /* Note change no line if hupcl is off */
- mutex_unlock(&port->serial->disc_mutex);
/* cancel any scheduled reading */
cancel_delayed_work_sync(&priv->rx_work);
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 586d30f..ee25a3f 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -993,8 +993,7 @@
}
-static void garmin_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void garmin_close(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 4cec990..be82ea9 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -184,8 +184,7 @@
}
EXPORT_SYMBOL_GPL(usb_serial_generic_resume);
-void usb_serial_generic_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+void usb_serial_generic_close(struct usb_serial_port *port)
{
dbg("%s - port %d", __func__, port->number);
generic_cleanup(port);
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index fb4a73d..53ef599 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -207,8 +207,7 @@
/* function prototypes for the usbserial callbacks */
static int edge_open(struct tty_struct *tty, struct usb_serial_port *port,
struct file *filp);
-static void edge_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp);
+static void edge_close(struct usb_serial_port *port);
static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
static int edge_write_room(struct tty_struct *tty);
@@ -965,7 +964,7 @@
if (!edge_port->txfifo.fifo) {
dbg("%s - no memory", __func__);
- edge_close(tty, port, filp);
+ edge_close(port);
return -ENOMEM;
}
@@ -975,7 +974,7 @@
if (!edge_port->write_urb) {
dbg("%s - no memory", __func__);
- edge_close(tty, port, filp);
+ edge_close(port);
return -ENOMEM;
}
@@ -1099,8 +1098,7 @@
* edge_close
* this function is called by the tty driver when a port is closed
*****************************************************************************/
-static void edge_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void edge_close(struct usb_serial_port *port)
{
struct edgeport_serial *edge_serial;
struct edgeport_port *edge_port;
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 513b25e..eabf20e 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2009,8 +2009,7 @@
return status;
}
-static void edge_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void edge_close(struct usb_serial_port *port)
{
struct edgeport_serial *edge_serial;
struct edgeport_port *edge_port;
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index cd62825..c610a99 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -76,8 +76,7 @@
/* Function prototypes for an ipaq */
static int ipaq_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
-static void ipaq_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+static void ipaq_close(struct usb_serial_port *port);
static int ipaq_calc_num_ports(struct usb_serial *serial);
static int ipaq_startup(struct usb_serial *serial);
static void ipaq_shutdown(struct usb_serial *serial);
@@ -714,8 +713,7 @@
}
-static void ipaq_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void ipaq_close(struct usb_serial_port *port)
{
struct ipaq_private *priv = usb_get_serial_port_data(port);
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index da2a2b4..29ad038 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -302,23 +302,17 @@
return 0;
}
-static void ipw_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void ipw_dtr_rts(struct usb_serial_port *port, int on)
{
struct usb_device *dev = port->serial->dev;
int result;
- if (tty_hung_up_p(filp)) {
- dbg("%s: tty_hung_up_p ...", __func__);
- return;
- }
-
/*--1: drop the dtr */
dbg("%s:dropping dtr", __func__);
result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
IPW_SIO_SET_PIN,
USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
- IPW_PIN_CLRDTR,
+ on ? IPW_PIN_SETDTR : IPW_PIN_CLRDTR,
0,
NULL,
0,
@@ -332,7 +326,7 @@
result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
IPW_SIO_SET_PIN, USB_TYPE_VENDOR |
USB_RECIP_INTERFACE | USB_DIR_OUT,
- IPW_PIN_CLRRTS,
+ on ? IPW_PIN_SETRTS : IPW_PIN_CLRRTS,
0,
NULL,
0,
@@ -340,7 +334,12 @@
if (result < 0)
dev_err(&port->dev,
"dropping rts failed (error = %d)\n", result);
+}
+static void ipw_close(struct usb_serial_port *port)
+{
+ struct usb_device *dev = port->serial->dev;
+ int result;
/*--3: purge */
dbg("%s:sending purge", __func__);
@@ -461,6 +460,7 @@
.num_ports = 1,
.open = ipw_open,
.close = ipw_close,
+ .dtr_rts = ipw_dtr_rts,
.port_probe = ipw_probe,
.port_remove = ipw_disconnect,
.write = ipw_write,
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 4e2cda9..66009b6 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -88,8 +88,7 @@
static int ir_startup (struct usb_serial *serial);
static int ir_open(struct tty_struct *tty, struct usb_serial_port *port,
struct file *filep);
-static void ir_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filep);
+static void ir_close(struct usb_serial_port *port);
static int ir_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
static void ir_write_bulk_callback (struct urb *urb);
@@ -346,8 +345,7 @@
return result;
}
-static void ir_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file * filp)
+static void ir_close(struct usb_serial_port *port)
{
dbg("%s - port %d", __func__, port->number);
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 4473d44..76a3cc3 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -40,7 +40,7 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v0.5"
+#define DRIVER_VERSION "v0.10"
#define DRIVER_DESC "Infinity USB Unlimited Phoenix driver"
static struct usb_device_id id_table[] = {
@@ -70,7 +70,6 @@
struct iuu_private {
spinlock_t lock; /* store irq state */
wait_queue_head_t delta_msr_wait;
- u8 line_control;
u8 line_status;
u8 termios_initialized;
int tiostatus; /* store IUART SIGNAL for tiocmget call */
@@ -651,32 +650,33 @@
unsigned long flags;
int result;
int i;
+ int buf_len;
char *buf_ptr = port->write_urb->transfer_buffer;
dbg("%s - enter", __func__);
+ spin_lock_irqsave(&priv->lock, flags);
*buf_ptr++ = IUU_UART_ESC;
*buf_ptr++ = IUU_UART_TX;
*buf_ptr++ = priv->writelen;
- memcpy(buf_ptr, priv->writebuf,
- priv->writelen);
+ memcpy(buf_ptr, priv->writebuf, priv->writelen);
+ buf_len = priv->writelen;
+ priv->writelen = 0;
+ spin_unlock_irqrestore(&priv->lock, flags);
if (debug == 1) {
- for (i = 0; i < priv->writelen; i++)
+ for (i = 0; i < buf_len; i++)
sprintf(priv->dbgbuf + i*2 ,
"%02X", priv->writebuf[i]);
- priv->dbgbuf[priv->writelen+i*2] = 0;
+ priv->dbgbuf[buf_len+i*2] = 0;
dbg("%s - writing %i chars : %s", __func__,
- priv->writelen, priv->dbgbuf);
+ buf_len, priv->dbgbuf);
}
usb_fill_bulk_urb(port->write_urb, port->serial->dev,
usb_sndbulkpipe(port->serial->dev,
port->bulk_out_endpointAddress),
- port->write_urb->transfer_buffer, priv->writelen + 3,
+ port->write_urb->transfer_buffer, buf_len + 3,
iuu_rxcmd, port);
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
- spin_lock_irqsave(&priv->lock, flags);
- priv->writelen = 0;
- spin_unlock_irqrestore(&priv->lock, flags);
usb_serial_port_softint(port);
return result;
}
@@ -770,14 +770,10 @@
return -ENOMEM;
spin_lock_irqsave(&priv->lock, flags);
- if (priv->writelen > 0) {
- /* buffer already filled but not commited */
- spin_unlock_irqrestore(&priv->lock, flags);
- return 0;
- }
+
/* fill the buffer */
- memcpy(priv->writebuf, buf, count);
- priv->writelen = count;
+ memcpy(priv->writebuf + priv->writelen, buf, count);
+ priv->writelen += count;
spin_unlock_irqrestore(&priv->lock, flags);
return count;
@@ -819,7 +815,7 @@
buf[0] = IUU_UART_ENABLE;
buf[1] = (u8) ((IUU_BAUD_9600 >> 8) & 0x00FF);
buf[2] = (u8) (0x00FF & IUU_BAUD_9600);
- buf[3] = (u8) (0x0F0 & IUU_TWO_STOP_BITS) | (0x07 & IUU_PARITY_EVEN);
+ buf[3] = (u8) (0x0F0 & IUU_ONE_STOP_BIT) | (0x07 & IUU_PARITY_EVEN);
status = bulk_immediate(port, buf, 4);
if (status != IUU_OPERATION_OK) {
@@ -946,19 +942,59 @@
return status;
}
-static int set_control_lines(struct usb_device *dev, u8 value)
+static void iuu_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port, struct ktermios *old_termios)
{
- return 0;
+ const u32 supported_mask = CMSPAR|PARENB|PARODD;
+
+ unsigned int cflag = tty->termios->c_cflag;
+ int status;
+ u32 actual;
+ u32 parity;
+ int csize = CS7;
+ int baud = 9600; /* Fixed for the moment */
+ u32 newval = cflag & supported_mask;
+
+ /* compute the parity parameter */
+ parity = 0;
+ if (cflag & CMSPAR) { /* Using mark space */
+ if (cflag & PARODD)
+ parity |= IUU_PARITY_SPACE;
+ else
+ parity |= IUU_PARITY_MARK;
+ } else if (!(cflag & PARENB)) {
+ parity |= IUU_PARITY_NONE;
+ csize = CS8;
+ } else if (cflag & PARODD)
+ parity |= IUU_PARITY_ODD;
+ else
+ parity |= IUU_PARITY_EVEN;
+
+ parity |= (cflag & CSTOPB ? IUU_TWO_STOP_BITS : IUU_ONE_STOP_BIT);
+
+ /* set it */
+ status = iuu_uart_baud(port,
+ (clockmode == 2) ? 16457 : 9600 * boost / 100,
+ &actual, parity);
+
+ /* set the termios value to the real one, so the user now what has
+ * changed. We support few fields so its easies to copy the old hw
+ * settings back over and then adjust them
+ */
+ if (old_termios)
+ tty_termios_copy_hw(tty->termios, old_termios);
+ if (status != 0) /* Set failed - return old bits */
+ return;
+ /* Re-encode speed, parity and csize */
+ tty_encode_baud_rate(tty, baud, baud);
+ tty->termios->c_cflag &= ~(supported_mask|CSIZE);
+ tty->termios->c_cflag |= newval | csize;
}
-static void iuu_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void iuu_close(struct usb_serial_port *port)
{
/* iuu_led (port,255,0,0,0); */
struct usb_serial *serial;
- struct iuu_private *priv = usb_get_serial_port_data(port);
- unsigned long flags;
- unsigned int c_cflag;
serial = port->serial;
if (!serial)
@@ -968,17 +1004,6 @@
iuu_uart_off(port);
if (serial->dev) {
- if (tty) {
- c_cflag = tty->termios->c_cflag;
- if (c_cflag & HUPCL) {
- /* drop DTR and RTS */
- priv = usb_get_serial_port_data(port);
- spin_lock_irqsave(&priv->lock, flags);
- priv->line_control = 0;
- spin_unlock_irqrestore(&priv->lock, flags);
- set_control_lines(port->serial->dev, 0);
- }
- }
/* free writebuf */
/* shutdown our urbs */
dbg("%s - shutting down urbs", __func__);
@@ -1154,7 +1179,7 @@
if (result) {
dev_err(&port->dev, "%s - failed submitting read urb,"
" error %d\n", __func__, result);
- iuu_close(tty, port, NULL);
+ iuu_close(port);
return -EPROTO;
} else {
dbg("%s - rxcmd OK", __func__);
@@ -1175,6 +1200,7 @@
.read_bulk_callback = iuu_uart_read_callback,
.tiocmget = iuu_tiocmget,
.tiocmset = iuu_tiocmset,
+ .set_termios = iuu_set_termios,
.attach = iuu_startup,
.shutdown = iuu_shutdown,
};
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 00daa8f..f1195a9 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1298,8 +1298,16 @@
usb_kill_urb(urb);
}
-static void keyspan_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void keyspan_dtr_rts(struct usb_serial_port *port, int on)
+{
+ struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);
+
+ p_priv->rts_state = on;
+ p_priv->dtr_state = on;
+ keyspan_send_setup(port, 0);
+}
+
+static void keyspan_close(struct usb_serial_port *port)
{
int i;
struct usb_serial *serial = port->serial;
@@ -1336,7 +1344,6 @@
stop_urb(p_priv->out_urbs[i]);
}
}
- tty_port_tty_set(&port->port, NULL);
}
/* download the firmware to a pre-renumeration device */
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index 38b4582..0d4569b 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -38,9 +38,8 @@
static int keyspan_open (struct tty_struct *tty,
struct usb_serial_port *port,
struct file *filp);
-static void keyspan_close (struct tty_struct *tty,
- struct usb_serial_port *port,
- struct file *filp);
+static void keyspan_close (struct usb_serial_port *port);
+static void keyspan_dtr_rts (struct usb_serial_port *port, int on);
static int keyspan_startup (struct usb_serial *serial);
static void keyspan_shutdown (struct usb_serial *serial);
static int keyspan_write_room (struct tty_struct *tty);
@@ -562,6 +561,7 @@
.num_ports = 1,
.open = keyspan_open,
.close = keyspan_close,
+ .dtr_rts = keyspan_dtr_rts,
.write = keyspan_write,
.write_room = keyspan_write_room,
.set_termios = keyspan_set_termios,
@@ -582,6 +582,7 @@
.num_ports = 2,
.open = keyspan_open,
.close = keyspan_close,
+ .dtr_rts = keyspan_dtr_rts,
.write = keyspan_write,
.write_room = keyspan_write_room,
.set_termios = keyspan_set_termios,
@@ -602,6 +603,7 @@
.num_ports = 4,
.open = keyspan_open,
.close = keyspan_close,
+ .dtr_rts = keyspan_dtr_rts,
.write = keyspan_write,
.write_room = keyspan_write_room,
.set_termios = keyspan_set_termios,
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index bf1ae24..ab769db 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -651,6 +651,35 @@
}
+static void keyspan_pda_dtr_rts(struct usb_serial_port *port, int on)
+{
+ struct usb_serial *serial = port->serial;
+
+ if (serial->dev) {
+ if (on)
+ keyspan_pda_set_modem_info(serial, (1<<7) | (1<< 2));
+ else
+ keyspan_pda_set_modem_info(serial, 0);
+ }
+}
+
+static int keyspan_pda_carrier_raised(struct usb_serial_port *port)
+{
+ struct usb_serial *serial = port->serial;
+ unsigned char modembits;
+
+ /* If we can read the modem status and the DCD is low then
+ carrier is not raised yet */
+ if (keyspan_pda_get_modem_info(serial, &modembits) >= 0) {
+ if (!(modembits & (1>>6)))
+ return 0;
+ }
+ /* Carrier raised, or we failed (eg disconnected) so
+ progress accordingly */
+ return 1;
+}
+
+
static int keyspan_pda_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp)
{
@@ -682,13 +711,6 @@
priv->tx_room = room;
priv->tx_throttled = room ? 0 : 1;
- /* the normal serial device seems to always turn on DTR and RTS here,
- so do the same */
- if (tty && (tty->termios->c_cflag & CBAUD))
- keyspan_pda_set_modem_info(serial, (1<<7) | (1<<2));
- else
- keyspan_pda_set_modem_info(serial, 0);
-
/*Start reading from the device*/
port->interrupt_in_urb->dev = serial->dev;
rc = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
@@ -700,19 +722,11 @@
error:
return rc;
}
-
-
-static void keyspan_pda_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void keyspan_pda_close(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
if (serial->dev) {
- /* the normal serial device seems to always shut
- off DTR and RTS now */
- if (tty->termios->c_cflag & HUPCL)
- keyspan_pda_set_modem_info(serial, 0);
-
/* shutdown our bulk reads and writes */
usb_kill_urb(port->write_urb);
usb_kill_urb(port->interrupt_in_urb);
@@ -839,6 +853,8 @@
.usb_driver = &keyspan_pda_driver,
.id_table = id_table_std,
.num_ports = 1,
+ .dtr_rts = keyspan_pda_dtr_rts,
+ .carrier_raised = keyspan_pda_carrier_raised,
.open = keyspan_pda_open,
.close = keyspan_pda_close,
.write = keyspan_pda_write,
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index fcd9082..fa817c6 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -76,8 +76,7 @@
static void klsi_105_shutdown(struct usb_serial *serial);
static int klsi_105_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
-static void klsi_105_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+static void klsi_105_close(struct usb_serial_port *port);
static int klsi_105_write(struct tty_struct *tty,
struct usb_serial_port *port, const unsigned char *buf, int count);
static void klsi_105_write_bulk_callback(struct urb *urb);
@@ -447,8 +446,7 @@
} /* klsi_105_open */
-static void klsi_105_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void klsi_105_close(struct usb_serial_port *port)
{
struct klsi_105_private *priv = usb_get_serial_port_data(port);
int rc;
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index c148544..6b57049 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -72,8 +72,7 @@
static void kobil_shutdown(struct usb_serial *serial);
static int kobil_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
-static void kobil_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp);
+static void kobil_close(struct usb_serial_port *port);
static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
static int kobil_write_room(struct tty_struct *tty);
@@ -209,7 +208,7 @@
for (i = 0; i < serial->num_ports; ++i) {
while (serial->port[i]->port.count > 0)
- kobil_close(NULL, serial->port[i], NULL);
+ kobil_close(serial->port[i]);
kfree(usb_get_serial_port_data(serial->port[i]));
usb_set_serial_port_data(serial->port[i], NULL);
}
@@ -346,11 +345,11 @@
}
-static void kobil_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void kobil_close(struct usb_serial_port *port)
{
dbg("%s - port %d", __func__, port->number);
+ /* FIXME: Add rts/dtr methods */
if (port->write_urb) {
usb_kill_urb(port->write_urb);
usb_free_urb(port->write_urb);
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 82930a7..8737955 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -95,8 +95,8 @@
static void mct_u232_shutdown(struct usb_serial *serial);
static int mct_u232_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
-static void mct_u232_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+static void mct_u232_close(struct usb_serial_port *port);
+static void mct_u232_dtr_rts(struct usb_serial_port *port, int on);
static void mct_u232_read_int_callback(struct urb *urb);
static void mct_u232_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old);
@@ -140,6 +140,7 @@
.num_ports = 1,
.open = mct_u232_open,
.close = mct_u232_close,
+ .dtr_rts = mct_u232_dtr_rts,
.throttle = mct_u232_throttle,
.unthrottle = mct_u232_unthrottle,
.read_int_callback = mct_u232_read_int_callback,
@@ -496,29 +497,29 @@
return retval;
} /* mct_u232_open */
-
-static void mct_u232_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void mct_u232_dtr_rts(struct usb_serial_port *port, int on)
{
- unsigned int c_cflag;
unsigned int control_state;
struct mct_u232_private *priv = usb_get_serial_port_data(port);
- dbg("%s port %d", __func__, port->number);
- if (tty) {
- c_cflag = tty->termios->c_cflag;
- mutex_lock(&port->serial->disc_mutex);
- if (c_cflag & HUPCL && !port->serial->disconnected) {
- /* drop DTR and RTS */
- spin_lock_irq(&priv->lock);
+ mutex_lock(&port->serial->disc_mutex);
+ if (!port->serial->disconnected) {
+ /* drop DTR and RTS */
+ spin_lock_irq(&priv->lock);
+ if (on)
+ priv->control_state |= TIOCM_DTR | TIOCM_RTS;
+ else
priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
- control_state = priv->control_state;
- spin_unlock_irq(&priv->lock);
- mct_u232_set_modem_ctrl(port->serial, control_state);
- }
- mutex_unlock(&port->serial->disc_mutex);
+ control_state = priv->control_state;
+ spin_unlock_irq(&priv->lock);
+ mct_u232_set_modem_ctrl(port->serial, control_state);
}
+ mutex_unlock(&port->serial->disc_mutex);
+}
+static void mct_u232_close(struct usb_serial_port *port)
+{
+ dbg("%s port %d", __func__, port->number);
if (port->serial->dev) {
/* shutdown our urbs */
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 24e3b5d..9e1a013 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -533,8 +533,7 @@
return chars;
}
-static void mos7720_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void mos7720_close(struct usb_serial_port *port)
{
struct usb_serial *serial;
struct moschip_port *mos7720_port;
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 84fb1dc..10b78a3 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1135,54 +1135,12 @@
}
-/************************************************************************
- *
- * mos7840_block_until_tx_empty
- *
- * This function will block the close until one of the following:
- * 1. TX count are 0
- * 2. The mos7840 has stopped
- * 3. A timeout of 3 seconds without activity has expired
- *
- ************************************************************************/
-static void mos7840_block_until_tx_empty(struct tty_struct *tty,
- struct moschip_port *mos7840_port)
-{
- int timeout = HZ / 10;
- int wait = 30;
- int count;
-
- while (1) {
-
- count = mos7840_chars_in_buffer(tty);
-
- /* Check for Buffer status */
- if (count <= 0)
- return;
-
- /* Block the thread for a while */
- interruptible_sleep_on_timeout(&mos7840_port->wait_chase,
- timeout);
-
- /* No activity.. count down section */
- wait--;
- if (wait == 0) {
- dbg("%s - TIMEOUT", __func__);
- return;
- } else {
- /* Reset timeout value back to seconds */
- wait = 30;
- }
- }
-}
-
/*****************************************************************************
* mos7840_close
* this function is called by the tty driver when a port is closed
*****************************************************************************/
-static void mos7840_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void mos7840_close(struct usb_serial_port *port)
{
struct usb_serial *serial;
struct moschip_port *mos7840_port;
@@ -1223,10 +1181,6 @@
}
}
- if (serial->dev)
- /* flush and block until tx is empty */
- mos7840_block_until_tx_empty(tty, mos7840_port);
-
/* While closing port, shutdown all bulk read, write *
* and interrupt read if they exists */
if (serial->dev) {
diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c
index bcdcbb8..f5f3751a8 100644
--- a/drivers/usb/serial/navman.c
+++ b/drivers/usb/serial/navman.c
@@ -98,8 +98,7 @@
return result;
}
-static void navman_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void navman_close(struct usb_serial_port *port)
{
dbg("%s - port %d", __func__, port->number);
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index df65397..1104617 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -66,8 +66,7 @@
/* function prototypes */
static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port,
struct file *filp);
-static void omninet_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp);
+static void omninet_close(struct usb_serial_port *port);
static void omninet_read_bulk_callback(struct urb *urb);
static void omninet_write_bulk_callback(struct urb *urb);
static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
@@ -189,8 +188,7 @@
return result;
}
-static void omninet_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void omninet_close(struct usb_serial_port *port)
{
dbg("%s - port %d", __func__, port->number);
usb_kill_urb(port->read_urb);
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index b500ad1..c20480a 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -173,8 +173,7 @@
return result;
}
-static void opticon_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp)
+static void opticon_close(struct usb_serial_port *port)
{
struct opticon_private *priv = usb_get_serial_data(port->serial);
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 7817b82..a16d69f 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -45,8 +45,9 @@
/* Function prototypes */
static int option_open(struct tty_struct *tty, struct usb_serial_port *port,
struct file *filp);
-static void option_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp);
+static void option_close(struct usb_serial_port *port);
+static void option_dtr_rts(struct usb_serial_port *port, int on);
+
static int option_startup(struct usb_serial *serial);
static void option_shutdown(struct usb_serial *serial);
static int option_write_room(struct tty_struct *tty);
@@ -61,7 +62,7 @@
static int option_tiocmget(struct tty_struct *tty, struct file *file);
static int option_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
-static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *port);
+static int option_send_setup(struct usb_serial_port *port);
static int option_suspend(struct usb_serial *serial, pm_message_t message);
static int option_resume(struct usb_serial *serial);
@@ -551,6 +552,7 @@
.num_ports = 1,
.open = option_open,
.close = option_close,
+ .dtr_rts = option_dtr_rts,
.write = option_write,
.write_room = option_write_room,
.chars_in_buffer = option_chars_in_buffer,
@@ -630,7 +632,7 @@
dbg("%s", __func__);
/* Doesn't support option setting */
tty_termios_copy_hw(tty->termios, old_termios);
- option_send_setup(tty, port);
+ option_send_setup(port);
}
static int option_tiocmget(struct tty_struct *tty, struct file *file)
@@ -669,7 +671,7 @@
portdata->rts_state = 0;
if (clear & TIOCM_DTR)
portdata->dtr_state = 0;
- return option_send_setup(tty, port);
+ return option_send_setup(port);
}
/* Write */
@@ -897,10 +899,6 @@
dbg("%s", __func__);
- /* Set some sane defaults */
- portdata->rts_state = 1;
- portdata->dtr_state = 1;
-
/* Reset low level data toggle and start reading from endpoints */
for (i = 0; i < N_IN_URB; i++) {
urb = portdata->in_urbs[i];
@@ -936,13 +934,28 @@
usb_pipeout(urb->pipe), 0); */
}
- option_send_setup(tty, port);
+ option_send_setup(port);
return 0;
}
-static void option_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void option_dtr_rts(struct usb_serial_port *port, int on)
+{
+ struct usb_serial *serial = port->serial;
+ struct option_port_private *portdata;
+
+ dbg("%s", __func__);
+ portdata = usb_get_serial_port_data(port);
+ mutex_lock(&serial->disc_mutex);
+ portdata->rts_state = on;
+ portdata->dtr_state = on;
+ if (serial->dev)
+ option_send_setup(port);
+ mutex_unlock(&serial->disc_mutex);
+}
+
+
+static void option_close(struct usb_serial_port *port)
{
int i;
struct usb_serial *serial = port->serial;
@@ -951,22 +964,13 @@
dbg("%s", __func__);
portdata = usb_get_serial_port_data(port);
- portdata->rts_state = 0;
- portdata->dtr_state = 0;
-
if (serial->dev) {
- mutex_lock(&serial->disc_mutex);
- if (!serial->disconnected)
- option_send_setup(tty, port);
- mutex_unlock(&serial->disc_mutex);
-
/* Stop reading/writing urbs */
for (i = 0; i < N_IN_URB; i++)
usb_kill_urb(portdata->in_urbs[i]);
for (i = 0; i < N_OUT_URB; i++)
usb_kill_urb(portdata->out_urbs[i]);
}
- tty_port_tty_set(&port->port, NULL);
}
/* Helper functions used by option_setup_urbs */
@@ -1032,28 +1036,24 @@
* This is exactly the same as SET_CONTROL_LINE_STATE from the PSTN
* CDC.
*/
-static int option_send_setup(struct tty_struct *tty,
- struct usb_serial_port *port)
+static int option_send_setup(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
struct option_port_private *portdata;
int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
+ int val = 0;
dbg("%s", __func__);
portdata = usb_get_serial_port_data(port);
- if (tty) {
- int val = 0;
- if (portdata->dtr_state)
- val |= 0x01;
- if (portdata->rts_state)
- val |= 0x02;
+ if (portdata->dtr_state)
+ val |= 0x01;
+ if (portdata->rts_state)
+ val |= 0x02;
- return usb_control_msg(serial->dev,
- usb_rcvctrlpipe(serial->dev, 0),
- 0x22, 0x21, val, ifNum, NULL, 0, USB_CTRL_SET_TIMEOUT);
- }
- return 0;
+ return usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev, 0),
+ 0x22, 0x21, val, ifNum, NULL, 0, USB_CTRL_SET_TIMEOUT);
}
static int option_startup(struct usb_serial *serial)
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index ba551f0..7de5478 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -143,8 +143,7 @@
/* function prototypes */
static int oti6858_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
-static void oti6858_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+static void oti6858_close(struct usb_serial_port *port);
static void oti6858_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old);
static int oti6858_ioctl(struct tty_struct *tty, struct file *file,
@@ -622,67 +621,30 @@
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed"
" with error %d\n", __func__, result);
- oti6858_close(tty, port, NULL);
+ oti6858_close(port);
return -EPROTO;
}
/* setup termios */
if (tty)
oti6858_set_termios(tty, port, &tmp_termios);
-
+ port->port.drain_delay = 256; /* FIXME: check the FIFO length */
return 0;
}
-static void oti6858_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void oti6858_close(struct usb_serial_port *port)
{
struct oti6858_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
- long timeout;
- wait_queue_t wait;
dbg("%s(port = %d)", __func__, port->number);
- /* wait for data to drain from the buffer */
spin_lock_irqsave(&priv->lock, flags);
- timeout = 30 * HZ; /* PL2303_CLOSING_WAIT */
- init_waitqueue_entry(&wait, current);
- add_wait_queue(&tty->write_wait, &wait);
- dbg("%s(): entering wait loop", __func__);
- for (;;) {
- set_current_state(TASK_INTERRUPTIBLE);
- if (oti6858_buf_data_avail(priv->buf) == 0
- || timeout == 0 || signal_pending(current)
- || port->serial->disconnected)
- break;
- spin_unlock_irqrestore(&priv->lock, flags);
- timeout = schedule_timeout(timeout);
- spin_lock_irqsave(&priv->lock, flags);
- }
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&tty->write_wait, &wait);
- dbg("%s(): after wait loop", __func__);
-
/* clear out any remaining data in the buffer */
oti6858_buf_clear(priv->buf);
spin_unlock_irqrestore(&priv->lock, flags);
- /* wait for characters to drain from the device */
- /* (this is long enough for the entire 256 byte */
- /* pl2303 hardware buffer to drain with no flow */
- /* control for data rates of 1200 bps or more, */
- /* for lower rates we should really know how much */
- /* data is in the buffer to compute a delay */
- /* that is not unnecessarily long) */
- /* FIXME
- bps = tty_get_baud_rate(tty);
- if (bps > 1200)
- timeout = max((HZ*2560)/bps,HZ/10);
- else
- */
- timeout = 2*HZ;
- schedule_timeout_interruptible(timeout);
- dbg("%s(): after schedule_timeout_interruptible()", __func__);
+ dbg("%s(): after buf_clear()", __func__);
/* cancel scheduled setup */
cancel_delayed_work(&priv->delayed_setup_work);
@@ -694,15 +656,6 @@
usb_kill_urb(port->write_urb);
usb_kill_urb(port->read_urb);
usb_kill_urb(port->interrupt_in_urb);
-
- /*
- if (tty && (tty->termios->c_cflag) & HUPCL) {
- // drop DTR and RTS
- spin_lock_irqsave(&priv->lock, flags);
- priv->pending_setup.control &= ~CONTROL_MASK;
- spin_unlock_irqrestore(&priv->lock, flags);
- }
- */
}
static int oti6858_tiocmset(struct tty_struct *tty, struct file *file,
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 751a533..e02dc3d 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -652,69 +652,41 @@
kfree(buf);
}
-static void pl2303_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void pl2303_dtr_rts(struct usb_serial_port *port, int on)
{
struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
- unsigned int c_cflag;
- int bps;
- long timeout;
- wait_queue_t wait;
+ u8 control;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ /* Change DTR and RTS */
+ if (on)
+ priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
+ else
+ priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
+ control = priv->line_control;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ set_control_lines(port->serial->dev, control);
+}
+
+static void pl2303_close(struct usb_serial_port *port)
+{
+ struct pl2303_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
dbg("%s - port %d", __func__, port->number);
- /* wait for data to drain from the buffer */
spin_lock_irqsave(&priv->lock, flags);
- timeout = PL2303_CLOSING_WAIT;
- init_waitqueue_entry(&wait, current);
- add_wait_queue(&tty->write_wait, &wait);
- for (;;) {
- set_current_state(TASK_INTERRUPTIBLE);
- if (pl2303_buf_data_avail(priv->buf) == 0 ||
- timeout == 0 || signal_pending(current) ||
- port->serial->disconnected)
- break;
- spin_unlock_irqrestore(&priv->lock, flags);
- timeout = schedule_timeout(timeout);
- spin_lock_irqsave(&priv->lock, flags);
- }
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&tty->write_wait, &wait);
/* clear out any remaining data in the buffer */
pl2303_buf_clear(priv->buf);
spin_unlock_irqrestore(&priv->lock, flags);
- /* wait for characters to drain from the device */
- /* (this is long enough for the entire 256 byte */
- /* pl2303 hardware buffer to drain with no flow */
- /* control for data rates of 1200 bps or more, */
- /* for lower rates we should really know how much */
- /* data is in the buffer to compute a delay */
- /* that is not unnecessarily long) */
- bps = tty_get_baud_rate(tty);
- if (bps > 1200)
- timeout = max((HZ*2560)/bps, HZ/10);
- else
- timeout = 2*HZ;
- schedule_timeout_interruptible(timeout);
-
/* shutdown our urbs */
dbg("%s - shutting down urbs", __func__);
usb_kill_urb(port->write_urb);
usb_kill_urb(port->read_urb);
usb_kill_urb(port->interrupt_in_urb);
- if (tty) {
- c_cflag = tty->termios->c_cflag;
- if (c_cflag & HUPCL) {
- /* drop DTR and RTS */
- spin_lock_irqsave(&priv->lock, flags);
- priv->line_control = 0;
- spin_unlock_irqrestore(&priv->lock, flags);
- set_control_lines(port->serial->dev, 0);
- }
- }
}
static int pl2303_open(struct tty_struct *tty,
@@ -748,7 +720,7 @@
if (result) {
dev_err(&port->dev, "%s - failed submitting read urb,"
" error %d\n", __func__, result);
- pl2303_close(tty, port, NULL);
+ pl2303_close(port);
return -EPROTO;
}
@@ -758,9 +730,10 @@
if (result) {
dev_err(&port->dev, "%s - failed submitting interrupt urb,"
" error %d\n", __func__, result);
- pl2303_close(tty, port, NULL);
+ pl2303_close(port);
return -EPROTO;
}
+ port->port.drain_delay = 256;
return 0;
}
@@ -821,6 +794,14 @@
return result;
}
+static int pl2303_carrier_raised(struct usb_serial_port *port)
+{
+ struct pl2303_private *priv = usb_get_serial_port_data(port);
+ if (priv->line_status & UART_DCD)
+ return 1;
+ return 0;
+}
+
static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
{
struct pl2303_private *priv = usb_get_serial_port_data(port);
@@ -1125,6 +1106,8 @@
.num_ports = 1,
.open = pl2303_open,
.close = pl2303_close,
+ .dtr_rts = pl2303_dtr_rts,
+ .carrier_raised = pl2303_carrier_raised,
.write = pl2303_write,
.ioctl = pl2303_ioctl,
.break_ctl = pl2303_break_ctl,
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 913225c..17ac34f 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -26,12 +26,10 @@
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
-#include <linux/usb/ch9.h>
#define SWIMS_USB_REQUEST_SetPower 0x00
#define SWIMS_USB_REQUEST_SetNmea 0x07
-/* per port private data */
#define N_IN_URB 4
#define N_OUT_URB 4
#define IN_BUFLEN 4096
@@ -39,6 +37,12 @@
static int debug;
static int nmea;
+/* Used in interface blacklisting */
+struct sierra_iface_info {
+ const u32 infolen; /* number of interface numbers on blacklist */
+ const u8 *ifaceinfo; /* pointer to the array holding the numbers */
+};
+
static int sierra_set_power_state(struct usb_device *udev, __u16 swiState)
{
int result;
@@ -85,6 +89,23 @@
return result;
}
+static int is_blacklisted(const u8 ifnum,
+ const struct sierra_iface_info *blacklist)
+{
+ const u8 *info;
+ int i;
+
+ if (blacklist) {
+ info = blacklist->ifaceinfo;
+
+ for (i = 0; i < blacklist->infolen; i++) {
+ if (info[i] == ifnum)
+ return 1;
+ }
+ }
+ return 0;
+}
+
static int sierra_calc_interface(struct usb_serial *serial)
{
int interface;
@@ -153,9 +174,25 @@
*/
usb_set_serial_data(serial, (void *)num_ports);
+ /* ifnum could have changed - by calling usb_set_interface */
+ ifnum = sierra_calc_interface(serial);
+
+ if (is_blacklisted(ifnum,
+ (struct sierra_iface_info *)id->driver_info)) {
+ dev_dbg(&serial->dev->dev,
+ "Ignoring blacklisted interface #%d\n", ifnum);
+ return -ENODEV;
+ }
+
return result;
}
+static const u8 direct_ip_non_serial_ifaces[] = { 7, 8, 9, 10, 11 };
+static const struct sierra_iface_info direct_ip_interface_blacklist = {
+ .infolen = ARRAY_SIZE(direct_ip_non_serial_ifaces),
+ .ifaceinfo = direct_ip_non_serial_ifaces,
+};
+
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */
{ USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */
@@ -188,9 +225,11 @@
{ USB_DEVICE(0x1199, 0x6833) }, /* Sierra Wireless MC8781 */
{ USB_DEVICE(0x1199, 0x683A) }, /* Sierra Wireless MC8785 */
{ USB_DEVICE(0x1199, 0x683B) }, /* Sierra Wireless MC8785 Composite */
- { USB_DEVICE(0x1199, 0x683C) }, /* Sierra Wireless MC8790 */
- { USB_DEVICE(0x1199, 0x683D) }, /* Sierra Wireless MC8790 */
- { USB_DEVICE(0x1199, 0x683E) }, /* Sierra Wireless MC8790 */
+ /* Sierra Wireless MC8790, MC8791, MC8792 Composite */
+ { USB_DEVICE(0x1199, 0x683C) },
+ { USB_DEVICE(0x1199, 0x683D) }, /* Sierra Wireless MC8791 Composite */
+ /* Sierra Wireless MC8790, MC8791, MC8792 */
+ { USB_DEVICE(0x1199, 0x683E) },
{ USB_DEVICE(0x1199, 0x6850) }, /* Sierra Wireless AirCard 880 */
{ USB_DEVICE(0x1199, 0x6851) }, /* Sierra Wireless AirCard 881 */
{ USB_DEVICE(0x1199, 0x6852) }, /* Sierra Wireless AirCard 880 E */
@@ -211,6 +250,10 @@
{ USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
{ USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
+ { USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */
+ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+ },
+
{ }
};
MODULE_DEVICE_TABLE(usb, id_table);
@@ -229,7 +272,6 @@
/* Input endpoints and buffers for this port */
struct urb *in_urbs[N_IN_URB];
- char *in_buffer[N_IN_URB];
/* Settings for the port */
int rts_state; /* Handshaking pins (outputs) */
@@ -240,57 +282,50 @@
int ri_state;
};
-static int sierra_send_setup(struct tty_struct *tty,
- struct usb_serial_port *port)
+static int sierra_send_setup(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
struct sierra_port_private *portdata;
__u16 interface = 0;
+ int val = 0;
dev_dbg(&port->dev, "%s", __func__);
portdata = usb_get_serial_port_data(port);
- if (tty) {
- int val = 0;
- if (portdata->dtr_state)
- val |= 0x01;
- if (portdata->rts_state)
- val |= 0x02;
+ if (portdata->dtr_state)
+ val |= 0x01;
+ if (portdata->rts_state)
+ val |= 0x02;
- /* If composite device then properly report interface */
- if (serial->num_ports == 1) {
- interface = sierra_calc_interface(serial);
-
- /* Control message is sent only to interfaces with
- * interrupt_in endpoints
- */
- if (port->interrupt_in_urb) {
- /* send control message */
- return usb_control_msg(serial->dev,
- usb_rcvctrlpipe(serial->dev, 0),
- 0x22, 0x21, val, interface,
- NULL, 0, USB_CTRL_SET_TIMEOUT);
- }
- }
-
- /* Otherwise the need to do non-composite mapping */
- else {
- if (port->bulk_out_endpointAddress == 2)
- interface = 0;
- else if (port->bulk_out_endpointAddress == 4)
- interface = 1;
- else if (port->bulk_out_endpointAddress == 5)
- interface = 2;
-
+ /* If composite device then properly report interface */
+ if (serial->num_ports == 1) {
+ interface = sierra_calc_interface(serial);
+ /* Control message is sent only to interfaces with
+ * interrupt_in endpoints
+ */
+ if (port->interrupt_in_urb) {
+ /* send control message */
return usb_control_msg(serial->dev,
usb_rcvctrlpipe(serial->dev, 0),
0x22, 0x21, val, interface,
NULL, 0, USB_CTRL_SET_TIMEOUT);
-
}
}
+ /* Otherwise the need to do non-composite mapping */
+ else {
+ if (port->bulk_out_endpointAddress == 2)
+ interface = 0;
+ else if (port->bulk_out_endpointAddress == 4)
+ interface = 1;
+ else if (port->bulk_out_endpointAddress == 5)
+ interface = 2;
+ return usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev, 0),
+ 0x22, 0x21, val, interface,
+ NULL, 0, USB_CTRL_SET_TIMEOUT);
+ }
return 0;
}
@@ -299,7 +334,7 @@
{
dev_dbg(&port->dev, "%s", __func__);
tty_termios_copy_hw(tty->termios, old_termios);
- sierra_send_setup(tty, port);
+ sierra_send_setup(port);
}
static int sierra_tiocmget(struct tty_struct *tty, struct file *file)
@@ -338,7 +373,18 @@
portdata->rts_state = 0;
if (clear & TIOCM_DTR)
portdata->dtr_state = 0;
- return sierra_send_setup(tty, port);
+ return sierra_send_setup(port);
+}
+
+static void sierra_release_urb(struct urb *urb)
+{
+ struct usb_serial_port *port;
+ if (urb) {
+ port = urb->context;
+ dev_dbg(&port->dev, "%s: %p\n", __func__, urb);
+ kfree(urb->transfer_buffer);
+ usb_free_urb(urb);
+ }
}
static void sierra_outdat_callback(struct urb *urb)
@@ -465,7 +511,7 @@
" received", __func__);
/* Resubmit urb so we continue receiving */
- if (port->port.count && status != -ESHUTDOWN) {
+ if (port->port.count && status != -ESHUTDOWN && status != -EPERM) {
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err)
dev_err(&port->dev, "resubmit read urb failed."
@@ -557,14 +603,129 @@
return 2048;
}
+static void sierra_stop_rx_urbs(struct usb_serial_port *port)
+{
+ int i;
+ struct sierra_port_private *portdata = usb_get_serial_port_data(port);
+
+ for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++)
+ usb_kill_urb(portdata->in_urbs[i]);
+
+ usb_kill_urb(port->interrupt_in_urb);
+}
+
+static int sierra_submit_rx_urbs(struct usb_serial_port *port, gfp_t mem_flags)
+{
+ int ok_cnt;
+ int err = -EINVAL;
+ int i;
+ struct urb *urb;
+ struct sierra_port_private *portdata = usb_get_serial_port_data(port);
+
+ ok_cnt = 0;
+ for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++) {
+ urb = portdata->in_urbs[i];
+ if (!urb)
+ continue;
+ err = usb_submit_urb(urb, mem_flags);
+ if (err) {
+ dev_err(&port->dev, "%s: submit urb failed: %d\n",
+ __func__, err);
+ } else {
+ ok_cnt++;
+ }
+ }
+
+ if (ok_cnt && port->interrupt_in_urb) {
+ err = usb_submit_urb(port->interrupt_in_urb, mem_flags);
+ if (err) {
+ dev_err(&port->dev, "%s: submit intr urb failed: %d\n",
+ __func__, err);
+ }
+ }
+
+ if (ok_cnt > 0) /* at least one rx urb submitted */
+ return 0;
+ else
+ return err;
+}
+
+static struct urb *sierra_setup_urb(struct usb_serial *serial, int endpoint,
+ int dir, void *ctx, int len,
+ gfp_t mem_flags,
+ usb_complete_t callback)
+{
+ struct urb *urb;
+ u8 *buf;
+
+ if (endpoint == -1)
+ return NULL;
+
+ urb = usb_alloc_urb(0, mem_flags);
+ if (urb == NULL) {
+ dev_dbg(&serial->dev->dev, "%s: alloc for endpoint %d failed\n",
+ __func__, endpoint);
+ return NULL;
+ }
+
+ buf = kmalloc(len, mem_flags);
+ if (buf) {
+ /* Fill URB using supplied data */
+ usb_fill_bulk_urb(urb, serial->dev,
+ usb_sndbulkpipe(serial->dev, endpoint) | dir,
+ buf, len, callback, ctx);
+
+ /* debug */
+ dev_dbg(&serial->dev->dev, "%s %c u : %p d:%p\n", __func__,
+ dir == USB_DIR_IN ? 'i' : 'o', urb, buf);
+ } else {
+ dev_dbg(&serial->dev->dev, "%s %c u:%p d:%p\n", __func__,
+ dir == USB_DIR_IN ? 'i' : 'o', urb, buf);
+
+ sierra_release_urb(urb);
+ urb = NULL;
+ }
+
+ return urb;
+}
+
+static void sierra_close(struct usb_serial_port *port)
+{
+ int i;
+ struct usb_serial *serial = port->serial;
+ struct sierra_port_private *portdata;
+
+ dev_dbg(&port->dev, "%s\n", __func__);
+ portdata = usb_get_serial_port_data(port);
+
+ portdata->rts_state = 0;
+ portdata->dtr_state = 0;
+
+ if (serial->dev) {
+ mutex_lock(&serial->disc_mutex);
+ if (!serial->disconnected)
+ sierra_send_setup(port);
+ mutex_unlock(&serial->disc_mutex);
+
+ /* Stop reading urbs */
+ sierra_stop_rx_urbs(port);
+ /* .. and release them */
+ for (i = 0; i < N_IN_URB; i++) {
+ sierra_release_urb(portdata->in_urbs[i]);
+ portdata->in_urbs[i] = NULL;
+ }
+ }
+}
+
static int sierra_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp)
{
struct sierra_port_private *portdata;
struct usb_serial *serial = port->serial;
int i;
+ int err;
+ int endpoint;
struct urb *urb;
- int result;
portdata = usb_get_serial_port_data(port);
@@ -574,77 +735,52 @@
portdata->rts_state = 1;
portdata->dtr_state = 1;
- /* Reset low level data toggle and start reading from endpoints */
- for (i = 0; i < N_IN_URB; i++) {
- urb = portdata->in_urbs[i];
- if (!urb)
- continue;
- if (urb->dev != serial->dev) {
- dev_dbg(&port->dev, "%s: dev %p != %p",
- __func__, urb->dev, serial->dev);
- continue;
- }
- /*
- * make sure endpoint data toggle is synchronized with the
- * device
- */
- usb_clear_halt(urb->dev, urb->pipe);
-
- result = usb_submit_urb(urb, GFP_KERNEL);
- if (result) {
- dev_err(&port->dev, "submit urb %d failed (%d) %d\n",
- i, result, urb->transfer_buffer_length);
- }
+ endpoint = port->bulk_in_endpointAddress;
+ for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++) {
+ urb = sierra_setup_urb(serial, endpoint, USB_DIR_IN, port,
+ IN_BUFLEN, GFP_KERNEL,
+ sierra_indat_callback);
+ portdata->in_urbs[i] = urb;
}
+ /* clear halt condition */
+ usb_clear_halt(serial->dev,
+ usb_sndbulkpipe(serial->dev, endpoint) | USB_DIR_IN);
- sierra_send_setup(tty, port);
-
- /* start up the interrupt endpoint if we have one */
- if (port->interrupt_in_urb) {
- result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
- if (result)
- dev_err(&port->dev, "submit irq_in urb failed %d\n",
- result);
+ err = sierra_submit_rx_urbs(port, GFP_KERNEL);
+ if (err) {
+ /* get rid of everything as in close */
+ sierra_close(port);
+ return err;
}
+ sierra_send_setup(port);
+
return 0;
}
-static void sierra_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+
+static void sierra_dtr_rts(struct usb_serial_port *port, int on)
{
- int i;
struct usb_serial *serial = port->serial;
struct sierra_port_private *portdata;
- dev_dbg(&port->dev, "%s", __func__);
portdata = usb_get_serial_port_data(port);
-
- portdata->rts_state = 0;
- portdata->dtr_state = 0;
+ portdata->rts_state = on;
+ portdata->dtr_state = on;
if (serial->dev) {
mutex_lock(&serial->disc_mutex);
if (!serial->disconnected)
- sierra_send_setup(tty, port);
+ sierra_send_setup(port);
mutex_unlock(&serial->disc_mutex);
-
- /* Stop reading/writing urbs */
- for (i = 0; i < N_IN_URB; i++)
- usb_kill_urb(portdata->in_urbs[i]);
}
-
- usb_kill_urb(port->interrupt_in_urb);
- tty_port_tty_set(&port->port, NULL);
}
static int sierra_startup(struct usb_serial *serial)
{
struct usb_serial_port *port;
struct sierra_port_private *portdata;
- struct urb *urb;
int i;
- int j;
dev_dbg(&serial->dev->dev, "%s", __func__);
@@ -666,34 +802,8 @@
return -ENOMEM;
}
spin_lock_init(&portdata->lock);
- for (j = 0; j < N_IN_URB; j++) {
- portdata->in_buffer[j] = kmalloc(IN_BUFLEN, GFP_KERNEL);
- if (!portdata->in_buffer[j]) {
- for (--j; j >= 0; j--)
- kfree(portdata->in_buffer[j]);
- kfree(portdata);
- return -ENOMEM;
- }
- }
-
+ /* Set the port private data pointer */
usb_set_serial_port_data(port, portdata);
-
- /* initialize the in urbs */
- for (j = 0; j < N_IN_URB; ++j) {
- urb = usb_alloc_urb(0, GFP_KERNEL);
- if (urb == NULL) {
- dev_dbg(&port->dev, "%s: alloc for in "
- "port failed.", __func__);
- continue;
- }
- /* Fill URB using supplied data. */
- usb_fill_bulk_urb(urb, serial->dev,
- usb_rcvbulkpipe(serial->dev,
- port->bulk_in_endpointAddress),
- portdata->in_buffer[j], IN_BUFLEN,
- sierra_indat_callback, port);
- portdata->in_urbs[j] = urb;
- }
}
return 0;
@@ -701,7 +811,7 @@
static void sierra_shutdown(struct usb_serial *serial)
{
- int i, j;
+ int i;
struct usb_serial_port *port;
struct sierra_port_private *portdata;
@@ -714,12 +824,6 @@
portdata = usb_get_serial_port_data(port);
if (!portdata)
continue;
-
- for (j = 0; j < N_IN_URB; j++) {
- usb_kill_urb(portdata->in_urbs[j]);
- usb_free_urb(portdata->in_urbs[j]);
- kfree(portdata->in_buffer[j]);
- }
kfree(portdata);
usb_set_serial_port_data(port, NULL);
}
@@ -737,6 +841,7 @@
.probe = sierra_probe,
.open = sierra_open,
.close = sierra_close,
+ .dtr_rts = sierra_dtr_rts,
.write = sierra_write,
.write_room = sierra_write_room,
.set_termios = sierra_set_termios,
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 5e7528c..8f7ed8f 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -446,66 +446,47 @@
"RTSCTS usb_control_msg(enable flowctrl) = %d\n", ret);
}
-/* close the serial port. We should wait for data sending to device 1st and
- * then kill all urb. */
-static void spcp8x5_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static int spcp8x5_carrier_raised(struct usb_serial_port *port)
+{
+ struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+ if (priv->line_status & MSR_STATUS_LINE_DCD)
+ return 1;
+ return 0;
+}
+
+static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on)
{
struct spcp8x5_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
- unsigned int c_cflag;
- int bps;
- long timeout;
- wait_queue_t wait;
+ u8 control;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (on)
+ priv->line_control = MCR_CONTROL_LINE_DTR
+ | MCR_CONTROL_LINE_RTS;
+ else
+ priv->line_control &= ~ (MCR_CONTROL_LINE_DTR
+ | MCR_CONTROL_LINE_RTS);
+ control = priv->line_control;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type);
+}
+
+/* close the serial port. We should wait for data sending to device 1st and
+ * then kill all urb. */
+static void spcp8x5_close(struct usb_serial_port *port)
+{
+ struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
int result;
dbg("%s - port %d", __func__, port->number);
- /* wait for data to drain from the buffer */
spin_lock_irqsave(&priv->lock, flags);
- timeout = SPCP8x5_CLOSING_WAIT;
- init_waitqueue_entry(&wait, current);
- add_wait_queue(&tty->write_wait, &wait);
- for (;;) {
- set_current_state(TASK_INTERRUPTIBLE);
- if (ringbuf_avail_data(priv->buf) == 0 ||
- timeout == 0 || signal_pending(current))
- break;
- spin_unlock_irqrestore(&priv->lock, flags);
- timeout = schedule_timeout(timeout);
- spin_lock_irqsave(&priv->lock, flags);
- }
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&tty->write_wait, &wait);
-
/* clear out any remaining data in the buffer */
clear_ringbuf(priv->buf);
spin_unlock_irqrestore(&priv->lock, flags);
- /* wait for characters to drain from the device (this is long enough
- * for the entire all byte spcp8x5 hardware buffer to drain with no
- * flow control for data rates of 1200 bps or more, for lower rates we
- * should really know how much data is in the buffer to compute a delay
- * that is not unnecessarily long) */
- bps = tty_get_baud_rate(tty);
- if (bps > 1200)
- timeout = max((HZ*2560) / bps, HZ/10);
- else
- timeout = 2*HZ;
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(timeout);
-
- /* clear control lines */
- if (tty) {
- c_cflag = tty->termios->c_cflag;
- if (c_cflag & HUPCL) {
- spin_lock_irqsave(&priv->lock, flags);
- priv->line_control = 0;
- spin_unlock_irqrestore(&priv->lock, flags);
- spcp8x5_set_ctrlLine(port->serial->dev, 0 , priv->type);
- }
- }
-
/* kill urb */
if (port->write_urb != NULL) {
result = usb_unlink_urb(port->write_urb);
@@ -665,13 +646,6 @@
if (ret)
return ret;
- spin_lock_irqsave(&priv->lock, flags);
- if (tty && (tty->termios->c_cflag & CBAUD))
- priv->line_control = MCR_DTR | MCR_RTS;
- else
- priv->line_control = 0;
- spin_unlock_irqrestore(&priv->lock, flags);
-
spcp8x5_set_ctrlLine(serial->dev, priv->line_control , priv->type);
/* Setup termios */
@@ -691,9 +665,10 @@
port->read_urb->dev = serial->dev;
ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (ret) {
- spcp8x5_close(tty, port, NULL);
+ spcp8x5_close(port);
return -EPROTO;
}
+ port->port.drain_delay = 256;
return 0;
}
@@ -1033,6 +1008,8 @@
.num_ports = 1,
.open = spcp8x5_open,
.close = spcp8x5_close,
+ .dtr_rts = spcp8x5_dtr_rts,
+ .carrier_raised = spcp8x5_carrier_raised,
.write = spcp8x5_write,
.set_termios = spcp8x5_set_termios,
.ioctl = spcp8x5_ioctl,
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index 69879e4..8b07ebc 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -152,8 +152,7 @@
return result;
}
-static void symbol_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp)
+static void symbol_close(struct usb_serial_port *port)
{
struct symbol_private *priv = usb_get_serial_data(port->serial);
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 0a64bac..42cb04c 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -100,8 +100,7 @@
static void ti_shutdown(struct usb_serial *serial);
static int ti_open(struct tty_struct *tty, struct usb_serial_port *port,
struct file *file);
-static void ti_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *file);
+static void ti_close(struct usb_serial_port *port);
static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *data, int count);
static int ti_write_room(struct tty_struct *tty);
@@ -647,8 +646,7 @@
}
-static void ti_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *file)
+static void ti_close(struct usb_serial_port *port)
{
struct ti_device *tdev;
struct ti_port *tport;
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index f331e2b..1967a7e 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -238,9 +238,11 @@
goto bailout_interface_put;
mutex_unlock(&serial->disc_mutex);
}
-
mutex_unlock(&port->mutex);
- return 0;
+ /* Now do the correct tty layer semantics */
+ retval = tty_port_block_til_ready(&port->port, tty, filp);
+ if (retval == 0)
+ return 0;
bailout_interface_put:
usb_autopm_put_interface(serial->interface);
@@ -259,64 +261,89 @@
return retval;
}
-static void serial_close(struct tty_struct *tty, struct file *filp)
+/**
+ * serial_do_down - shut down hardware
+ * @port: port to shut down
+ *
+ * Shut down a USB port unless it is the console. We never shut down the
+ * console hardware as it will always be in use.
+ *
+ * Don't free any resources at this point
+ */
+static void serial_do_down(struct usb_serial_port *port)
{
- struct usb_serial_port *port = tty->driver_data;
+ struct usb_serial_driver *drv = port->serial->type;
struct usb_serial *serial;
struct module *owner;
- int count;
- if (!port)
+ /* The console is magical, do not hang up the console hardware
+ or there will be tears */
+ if (port->console)
return;
- dbg("%s - port %d", __func__, port->number);
-
mutex_lock(&port->mutex);
serial = port->serial;
owner = serial->type->driver.owner;
- if (port->port.count == 0) {
- mutex_unlock(&port->mutex);
- return;
- }
+ if (drv->close)
+ drv->close(port);
- if (port->port.count == 1)
- /* only call the device specific close if this
- * port is being closed by the last owner. Ensure we do
- * this before we drop the port count. The call is protected
- * by the port mutex
- */
- serial->type->close(tty, port, filp);
-
- if (port->port.count == (port->console ? 2 : 1)) {
- struct tty_struct *tty = tty_port_tty_get(&port->port);
- if (tty) {
- /* We must do this before we drop the port count to
- zero. */
- if (tty->driver_data)
- tty->driver_data = NULL;
- tty_port_tty_set(&port->port, NULL);
- tty_kref_put(tty);
- }
- }
-
- --port->port.count;
- count = port->port.count;
mutex_unlock(&port->mutex);
+}
+
+/**
+ * serial_do_free - free resources post close/hangup
+ * @port: port to free up
+ *
+ * Do the resource freeing and refcount dropping for the port. We must
+ * be careful about ordering and we must avoid freeing up the console.
+ */
+
+static void serial_do_free(struct usb_serial_port *port)
+{
+ struct usb_serial *serial;
+ struct module *owner;
+
+ /* The console is magical, do not hang up the console hardware
+ or there will be tears */
+ if (port->console)
+ return;
+
+ serial = port->serial;
+ owner = serial->type->driver.owner;
put_device(&port->dev);
-
/* Mustn't dereference port any more */
- if (count == 0) {
- mutex_lock(&serial->disc_mutex);
- if (!serial->disconnected)
- usb_autopm_put_interface(serial->interface);
- mutex_unlock(&serial->disc_mutex);
- }
+ mutex_lock(&serial->disc_mutex);
+ if (!serial->disconnected)
+ usb_autopm_put_interface(serial->interface);
+ mutex_unlock(&serial->disc_mutex);
usb_serial_put(serial);
-
/* Mustn't dereference serial any more */
- if (count == 0)
- module_put(owner);
+ module_put(owner);
+}
+
+static void serial_close(struct tty_struct *tty, struct file *filp)
+{
+ struct usb_serial_port *port = tty->driver_data;
+
+ dbg("%s - port %d", __func__, port->number);
+
+
+ if (tty_port_close_start(&port->port, tty, filp) == 0)
+ return;
+
+ serial_do_down(port);
+ tty_port_close_end(&port->port, tty);
+ tty_port_tty_set(&port->port, NULL);
+ serial_do_free(port);
+}
+
+static void serial_hangup(struct tty_struct *tty)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ serial_do_down(port);
+ tty_port_hangup(&port->port);
+ serial_do_free(port);
}
static int serial_write(struct tty_struct *tty, const unsigned char *buf,
@@ -648,6 +675,29 @@
return NULL;
}
+static int serial_carrier_raised(struct tty_port *port)
+{
+ struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
+ struct usb_serial_driver *drv = p->serial->type;
+ if (drv->carrier_raised)
+ return drv->carrier_raised(p);
+ /* No carrier control - don't block */
+ return 1;
+}
+
+static void serial_dtr_rts(struct tty_port *port, int on)
+{
+ struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
+ struct usb_serial_driver *drv = p->serial->type;
+ if (drv->dtr_rts)
+ drv->dtr_rts(p, on);
+}
+
+static const struct tty_port_operations serial_port_ops = {
+ .carrier_raised = serial_carrier_raised,
+ .dtr_rts = serial_dtr_rts,
+};
+
int usb_serial_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
@@ -841,6 +891,7 @@
if (!port)
goto probe_error;
tty_port_init(&port->port);
+ port->port.ops = &serial_port_ops;
port->serial = serial;
spin_lock_init(&port->lock);
mutex_init(&port->mutex);
@@ -1071,6 +1122,9 @@
if (port) {
struct tty_struct *tty = tty_port_tty_get(&port->port);
if (tty) {
+ /* The hangup will occur asynchronously but
+ the object refcounts will sort out all the
+ cleanup */
tty_hangup(tty);
tty_kref_put(tty);
}
@@ -1135,6 +1189,7 @@
.open = serial_open,
.close = serial_close,
.write = serial_write,
+ .hangup = serial_hangup,
.write_room = serial_write_room,
.ioctl = serial_ioctl,
.set_termios = serial_set_termios,
@@ -1147,6 +1202,7 @@
.proc_fops = &serial_proc_fops,
};
+
struct tty_driver *usb_serial_tty_driver;
static int __init usb_serial_init(void)
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 5ac414b..b15f1c0 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -38,8 +38,7 @@
/* function prototypes for a handspring visor */
static int visor_open(struct tty_struct *tty, struct usb_serial_port *port,
struct file *filp);
-static void visor_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp);
+static void visor_close(struct usb_serial_port *port);
static int visor_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
static int visor_write_room(struct tty_struct *tty);
@@ -324,8 +323,7 @@
}
-static void visor_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void visor_close(struct usb_serial_port *port)
{
struct visor_private *priv = usb_get_serial_port_data(port);
unsigned char *transfer_buffer;
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 5335d32..7c7295d 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -147,8 +147,7 @@
static void whiteheat_shutdown(struct usb_serial *serial);
static int whiteheat_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
-static void whiteheat_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+static void whiteheat_close(struct usb_serial_port *port);
static int whiteheat_write(struct tty_struct *tty,
struct usb_serial_port *port,
const unsigned char *buf, int count);
@@ -712,8 +711,7 @@
}
-static void whiteheat_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void whiteheat_close(struct usb_serial_port *port)
{
struct whiteheat_private *info = usb_get_serial_port_data(port);
struct whiteheat_urb_wrap *wrap;
@@ -723,31 +721,7 @@
dbg("%s - port %d", __func__, port->number);
- mutex_lock(&port->serial->disc_mutex);
- /* filp is NULL when called from usb_serial_disconnect */
- if ((filp && (tty_hung_up_p(filp))) || port->serial->disconnected) {
- mutex_unlock(&port->serial->disc_mutex);
- return;
- }
- mutex_unlock(&port->serial->disc_mutex);
-
- tty->closing = 1;
-
-/*
- * Not currently in use; tty_wait_until_sent() calls
- * serial_chars_in_buffer() which deadlocks on the second semaphore
- * acquisition. This should be fixed at some point. Greg's been
- * notified.
- if ((filp->f_flags & (O_NDELAY | O_NONBLOCK)) == 0) {
- tty_wait_until_sent(tty, CLOSING_DELAY);
- }
-*/
-
- tty_driver_flush_buffer(tty);
- tty_ldisc_flush(tty);
-
firm_report_tx_done(port);
-
firm_close(port);
/* shutdown our bulk reads and writes */
@@ -775,10 +749,7 @@
}
spin_unlock_irq(&info->lock);
mutex_unlock(&info->deathwarrant);
-
stop_command_port(port->serial);
-
- tty->closing = 0;
}
diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c
index c68edb9..9b1d285 100644
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -557,8 +557,10 @@
int err = register_filesystem(&devpts_fs_type);
if (!err) {
devpts_mnt = kern_mount(&devpts_fs_type);
- if (IS_ERR(devpts_mnt))
+ if (IS_ERR(devpts_mnt)) {
err = PTR_ERR(devpts_mnt);
+ unregister_filesystem(&devpts_fs_type);
+ }
}
return err;
}
diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h
index 788850b..1fbdea4 100644
--- a/include/linux/cyclades.h
+++ b/include/linux/cyclades.h
@@ -142,19 +142,6 @@
#ifndef DP_WINDOW_SIZE
-/* #include "cyclomz.h" */
-/****************** ****************** *******************/
-/*
- * The data types defined below are used in all ZFIRM interface
- * data structures. They accomodate differences between HW
- * architectures and compilers.
- */
-
-typedef __u64 ucdouble; /* 64 bits, unsigned */
-typedef __u32 uclong; /* 32 bits, unsigned */
-typedef __u16 ucshort; /* 16 bits, unsigned */
-typedef __u8 ucchar; /* 8 bits, unsigned */
-
/*
* Memory Window Sizes
*/
@@ -507,16 +494,20 @@
/* Per card data structure */
struct cyclades_card {
- void __iomem *base_addr;
- void __iomem *ctl_addr;
- int irq;
- unsigned int num_chips; /* 0 if card absent, -1 if Z/PCI, else Y */
- unsigned int first_line; /* minor number of first channel on card */
- unsigned int nports; /* Number of ports in the card */
- int bus_index; /* address shift - 0 for ISA, 1 for PCI */
- int intr_enabled; /* FW Interrupt flag - 0 disabled, 1 enabled */
- spinlock_t card_lock;
- struct cyclades_port *ports;
+ void __iomem *base_addr;
+ union {
+ void __iomem *p9050;
+ struct RUNTIME_9060 __iomem *p9060;
+ } ctl_addr;
+ int irq;
+ unsigned int num_chips; /* 0 if card absent, -1 if Z/PCI, else Y */
+ unsigned int first_line; /* minor number of first channel on card */
+ unsigned int nports; /* Number of ports in the card */
+ int bus_index; /* address shift - 0 for ISA, 1 for PCI */
+ int intr_enabled; /* FW Interrupt flag - 0 disabled, 1 enabled */
+ u32 hw_ver;
+ spinlock_t card_lock;
+ struct cyclades_port *ports;
};
/***************************************
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 0f71812..d7d1c41 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1996,10 +1996,12 @@
#define PCI_DEVICE_ID_OXSEMI_PCIe952_1_U 0xC118
#define PCI_DEVICE_ID_OXSEMI_PCIe952_1_GU 0xC11C
#define PCI_DEVICE_ID_OXSEMI_16PCI954 0x9501
+#define PCI_DEVICE_ID_OXSEMI_C950 0x950B
#define PCI_DEVICE_ID_OXSEMI_16PCI95N 0x9511
#define PCI_DEVICE_ID_OXSEMI_16PCI954PP 0x9513
#define PCI_DEVICE_ID_OXSEMI_16PCI952 0x9521
#define PCI_DEVICE_ID_OXSEMI_16PCI952PP 0x9523
+#define PCI_SUBDEVICE_ID_OXSEMI_C950 0x0001
#define PCI_VENDOR_ID_CHELSIO 0x1425
diff --git a/include/linux/rational.h b/include/linux/rational.h
new file mode 100644
index 0000000..4f532fc
--- /dev/null
+++ b/include/linux/rational.h
@@ -0,0 +1,19 @@
+/*
+ * rational fractions
+ *
+ * Copyright (C) 2009 emlix GmbH, Oskar Schirmer <os@emlix.com>
+ *
+ * helper functions when coping with rational numbers,
+ * e.g. when calculating optimum numerator/denominator pairs for
+ * pll configuration taking into account restricted register size
+ */
+
+#ifndef _LINUX_RATIONAL_H
+#define _LINUX_RATIONAL_H
+
+void rational_best_approximation(
+ unsigned long given_numerator, unsigned long given_denominator,
+ unsigned long max_numerator, unsigned long max_denominator,
+ unsigned long *best_numerator, unsigned long *best_denominator);
+
+#endif /* _LINUX_RATIONAL_H */
diff --git a/include/linux/serial.h b/include/linux/serial.h
index 9136cc5..e5bb75a 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -96,54 +96,76 @@
/*
* Definitions for async_struct (and serial_struct) flags field
+ *
+ * Define ASYNCB_* for convenient use with {test,set,clear}_bit.
*/
-#define ASYNC_HUP_NOTIFY 0x0001 /* Notify getty on hangups and closes
- on the callout port */
-#define ASYNC_FOURPORT 0x0002 /* Set OU1, OUT2 per AST Fourport settings */
-#define ASYNC_SAK 0x0004 /* Secure Attention Key (Orange book) */
-#define ASYNC_SPLIT_TERMIOS 0x0008 /* Separate termios for dialin/callout */
+#define ASYNCB_HUP_NOTIFY 0 /* Notify getty on hangups and closes
+ * on the callout port */
+#define ASYNCB_FOURPORT 1 /* Set OU1, OUT2 per AST Fourport settings */
+#define ASYNCB_SAK 2 /* Secure Attention Key (Orange book) */
+#define ASYNCB_SPLIT_TERMIOS 3 /* Separate termios for dialin/callout */
+#define ASYNCB_SPD_HI 4 /* Use 56000 instead of 38400 bps */
+#define ASYNCB_SPD_VHI 5 /* Use 115200 instead of 38400 bps */
+#define ASYNCB_SKIP_TEST 6 /* Skip UART test during autoconfiguration */
+#define ASYNCB_AUTO_IRQ 7 /* Do automatic IRQ during
+ * autoconfiguration */
+#define ASYNCB_SESSION_LOCKOUT 8 /* Lock out cua opens based on session */
+#define ASYNCB_PGRP_LOCKOUT 9 /* Lock out cua opens based on pgrp */
+#define ASYNCB_CALLOUT_NOHUP 10 /* Don't do hangups for cua device */
+#define ASYNCB_HARDPPS_CD 11 /* Call hardpps when CD goes high */
+#define ASYNCB_SPD_SHI 12 /* Use 230400 instead of 38400 bps */
+#define ASYNCB_LOW_LATENCY 13 /* Request low latency behaviour */
+#define ASYNCB_BUGGY_UART 14 /* This is a buggy UART, skip some safety
+ * checks. Note: can be dangerous! */
+#define ASYNCB_AUTOPROBE 15 /* Port was autoprobed by PCI or PNP code */
+#define ASYNCB_LAST_USER 15
-#define ASYNC_SPD_MASK 0x1030
-#define ASYNC_SPD_HI 0x0010 /* Use 56000 instead of 38400 bps */
+/* Internal flags used only by kernel */
+#define ASYNCB_INITIALIZED 31 /* Serial port was initialized */
+#define ASYNCB_NORMAL_ACTIVE 29 /* Normal device is active */
+#define ASYNCB_BOOT_AUTOCONF 28 /* Autoconfigure port on bootup */
+#define ASYNCB_CLOSING 27 /* Serial port is closing */
+#define ASYNCB_CTS_FLOW 26 /* Do CTS flow control */
+#define ASYNCB_CHECK_CD 25 /* i.e., CLOCAL */
+#define ASYNCB_SHARE_IRQ 24 /* for multifunction cards, no longer used */
+#define ASYNCB_CONS_FLOW 23 /* flow control for console */
+#define ASYNCB_BOOT_ONLYMCA 22 /* Probe only if MCA bus */
+#define ASYNCB_FIRST_KERNEL 22
-#define ASYNC_SPD_VHI 0x0020 /* Use 115200 instead of 38400 bps */
-#define ASYNC_SPD_CUST 0x0030 /* Use user-specified divisor */
+#define ASYNC_HUP_NOTIFY (1U << ASYNCB_HUP_NOTIFY)
+#define ASYNC_FOURPORT (1U << ASYNCB_FOURPORT)
+#define ASYNC_SAK (1U << ASYNCB_SAK)
+#define ASYNC_SPLIT_TERMIOS (1U << ASYNCB_SPLIT_TERMIOS)
+#define ASYNC_SPD_HI (1U << ASYNCB_SPD_HI)
+#define ASYNC_SPD_VHI (1U << ASYNCB_SPD_VHI)
+#define ASYNC_SKIP_TEST (1U << ASYNCB_SKIP_TEST)
+#define ASYNC_AUTO_IRQ (1U << ASYNCB_AUTO_IRQ)
+#define ASYNC_SESSION_LOCKOUT (1U << ASYNCB_SESSION_LOCKOUT)
+#define ASYNC_PGRP_LOCKOUT (1U << ASYNCB_PGRP_LOCKOUT)
+#define ASYNC_CALLOUT_NOHUP (1U << ASYNCB_CALLOUT_NOHUP)
+#define ASYNC_HARDPPS_CD (1U << ASYNCB_HARDPPS_CD)
+#define ASYNC_SPD_SHI (1U << ASYNCB_SPD_SHI)
+#define ASYNC_LOW_LATENCY (1U << ASYNCB_LOW_LATENCY)
+#define ASYNC_BUGGY_UART (1U << ASYNCB_BUGGY_UART)
+#define ASYNC_AUTOPROBE (1U << ASYNCB_AUTOPROBE)
-#define ASYNC_SKIP_TEST 0x0040 /* Skip UART test during autoconfiguration */
-#define ASYNC_AUTO_IRQ 0x0080 /* Do automatic IRQ during autoconfiguration */
-#define ASYNC_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */
-#define ASYNC_PGRP_LOCKOUT 0x0200 /* Lock out cua opens based on pgrp */
-#define ASYNC_CALLOUT_NOHUP 0x0400 /* Don't do hangups for cua device */
+#define ASYNC_FLAGS ((1U << ASYNCB_LAST_USER) - 1)
+#define ASYNC_USR_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI| \
+ ASYNC_CALLOUT_NOHUP|ASYNC_SPD_SHI|ASYNC_LOW_LATENCY)
+#define ASYNC_SPD_CUST (ASYNC_SPD_HI|ASYNC_SPD_VHI)
+#define ASYNC_SPD_WARP (ASYNC_SPD_HI|ASYNC_SPD_SHI)
+#define ASYNC_SPD_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
-#define ASYNC_HARDPPS_CD 0x0800 /* Call hardpps when CD goes high */
-
-#define ASYNC_SPD_SHI 0x1000 /* Use 230400 instead of 38400 bps */
-#define ASYNC_SPD_WARP 0x1010 /* Use 460800 instead of 38400 bps */
-
-#define ASYNC_LOW_LATENCY 0x2000 /* Request low latency behaviour */
-
-#define ASYNC_BUGGY_UART 0x4000 /* This is a buggy UART, skip some safety
- * checks. Note: can be dangerous! */
-
-#define ASYNC_AUTOPROBE 0x8000 /* Port was autoprobed by PCI or PNP code */
-
-#define ASYNC_FLAGS 0x7FFF /* Possible legal async flags */
-#define ASYNC_USR_MASK 0x3430 /* Legal flags that non-privileged
- * users can set or reset */
-
-/* Internal flags used only by kernel/chr_drv/serial.c */
-#define ASYNC_INITIALIZED 0x80000000 /* Serial port was initialized */
-#define ASYNC_NORMAL_ACTIVE 0x20000000 /* Normal device is active */
-#define ASYNC_BOOT_AUTOCONF 0x10000000 /* Autoconfigure port on bootup */
-#define ASYNC_CLOSING 0x08000000 /* Serial port is closing */
-#define ASYNC_CTS_FLOW 0x04000000 /* Do CTS flow control */
-#define ASYNC_CHECK_CD 0x02000000 /* i.e., CLOCAL */
-#define ASYNC_SHARE_IRQ 0x01000000 /* for multifunction cards
- --- no longer used */
-#define ASYNC_CONS_FLOW 0x00800000 /* flow control for console */
-
-#define ASYNC_BOOT_ONLYMCA 0x00400000 /* Probe only if MCA bus */
-#define ASYNC_INTERNAL_FLAGS 0xFFC00000 /* Internal flags */
+#define ASYNC_INITIALIZED (1U << ASYNCB_INITIALIZED)
+#define ASYNC_NORMAL_ACTIVE (1U << ASYNCB_NORMAL_ACTIVE)
+#define ASYNC_BOOT_AUTOCONF (1U << ASYNCB_BOOT_AUTOCONF)
+#define ASYNC_CLOSING (1U << ASYNCB_CLOSING)
+#define ASYNC_CTS_FLOW (1U << ASYNCB_CTS_FLOW)
+#define ASYNC_CHECK_CD (1U << ASYNCB_CHECK_CD)
+#define ASYNC_SHARE_IRQ (1U << ASYNCB_SHARE_IRQ)
+#define ASYNC_CONS_FLOW (1U << ASYNCB_CONS_FLOW)
+#define ASYNC_BOOT_ONLYMCA (1U << ASYNCB_BOOT_ONLYMCA)
+#define ASYNC_INTERNAL_FLAGS (~((1U << ASYNCB_FIRST_KERNEL) - 1))
/*
* Multiport serial configuration structure --- external structure
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 57a97e5..6fd80c4 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -41,7 +41,8 @@
#define PORT_XSCALE 15
#define PORT_RM9000 16 /* PMC-Sierra RM9xxx internal UART */
#define PORT_OCTEON 17 /* Cavium OCTEON internal UART */
-#define PORT_MAX_8250 17 /* max port ID */
+#define PORT_AR7 18 /* Texas Instruments AR7 internal UART */
+#define PORT_MAX_8250 18 /* max port ID */
/*
* ARM specific type numbers. These are not currently guaranteed
@@ -167,6 +168,9 @@
/* MAX3100 */
#define PORT_MAX3100 86
+/* Timberdale UART */
+#define PORT_TIMBUART 87
+
#ifdef __KERNEL__
#include <linux/compiler.h>
diff --git a/include/linux/tty.h b/include/linux/tty.h
index fc39db95..1488d8c 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -185,7 +185,7 @@
struct tty_port_operations {
/* Return 1 if the carrier is raised */
int (*carrier_raised)(struct tty_port *port);
- void (*raise_dtr_rts)(struct tty_port *port);
+ void (*dtr_rts)(struct tty_port *port, int raise);
};
struct tty_port {
@@ -201,6 +201,9 @@
unsigned char *xmit_buf; /* Optional buffer */
int close_delay; /* Close port delay */
int closing_wait; /* Delay for output */
+ int drain_delay; /* Set to zero if no pure time
+ based drain is needed else
+ set to size of fifo */
};
/*
@@ -223,8 +226,11 @@
struct tty_driver *driver;
const struct tty_operations *ops;
int index;
- /* The ldisc objects are protected by tty_ldisc_lock at the moment */
- struct tty_ldisc ldisc;
+
+ /* Protects ldisc changes: Lock tty not pty */
+ struct mutex ldisc_mutex;
+ struct tty_ldisc *ldisc;
+
struct mutex termios_mutex;
spinlock_t ctrl_lock;
/* Termios values are protected by the termios mutex */
@@ -311,6 +317,7 @@
#define TTY_CLOSING 7 /* ->close() in progress */
#define TTY_LDISC 9 /* Line discipline attached */
#define TTY_LDISC_CHANGING 10 /* Line discipline changing */
+#define TTY_LDISC_OPEN 11 /* Line discipline is open */
#define TTY_HW_COOK_OUT 14 /* Hardware can do output cooking */
#define TTY_HW_COOK_IN 15 /* Hardware can do input cooking */
#define TTY_PTY_LOCK 16 /* pty private */
@@ -403,6 +410,7 @@
extern struct tty_ldisc *tty_ldisc_ref(struct tty_struct *);
extern void tty_ldisc_deref(struct tty_ldisc *);
extern struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *);
+extern void tty_ldisc_hangup(struct tty_struct *tty);
extern const struct file_operations tty_ldiscs_proc_fops;
extern void tty_wakeup(struct tty_struct *tty);
@@ -425,6 +433,9 @@
extern void tty_release_dev(struct file *filp);
extern int tty_init_termios(struct tty_struct *tty);
+extern struct tty_struct *tty_pair_get_tty(struct tty_struct *tty);
+extern struct tty_struct *tty_pair_get_pty(struct tty_struct *tty);
+
extern struct mutex tty_mutex;
extern void tty_write_unlock(struct tty_struct *tty);
@@ -438,6 +449,7 @@
extern void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty);
extern int tty_port_carrier_raised(struct tty_port *port);
extern void tty_port_raise_dtr_rts(struct tty_port *port);
+extern void tty_port_lower_dtr_rts(struct tty_port *port);
extern void tty_port_hangup(struct tty_port *port);
extern int tty_port_block_til_ready(struct tty_port *port,
struct tty_struct *tty, struct file *filp);
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index bcba84e..3566129 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -127,7 +127,8 @@
* the line discipline are close to full, and it should somehow
* signal that no more characters should be sent to the tty.
*
- * Optional: Always invoke via tty_throttle();
+ * Optional: Always invoke via tty_throttle(), called under the
+ * termios lock.
*
* void (*unthrottle)(struct tty_struct * tty);
*
@@ -135,7 +136,8 @@
* that characters can now be sent to the tty without fear of
* overrunning the input buffers of the line disciplines.
*
- * Optional: Always invoke via tty_unthrottle();
+ * Optional: Always invoke via tty_unthrottle(), called under the
+ * termios lock.
*
* void (*stop)(struct tty_struct *tty);
*
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 625e9e4..8cdfed7 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -224,8 +224,7 @@
/* Called by console with tty = NULL and by tty */
int (*open)(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
- void (*close)(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+ void (*close)(struct usb_serial_port *port);
int (*write)(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
/* Called only by the tty layer */
@@ -241,6 +240,10 @@
int (*tiocmget)(struct tty_struct *tty, struct file *file);
int (*tiocmset)(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
+ /* Called by the tty layer for port level work. There may or may not
+ be an attached tty at this point */
+ void (*dtr_rts)(struct usb_serial_port *port, int on);
+ int (*carrier_raised)(struct usb_serial_port *port);
/* USB events */
void (*read_int_callback)(struct urb *urb);
void (*write_int_callback)(struct urb *urb);
@@ -283,8 +286,7 @@
struct usb_serial_port *port, struct file *filp);
extern int usb_serial_generic_write(struct tty_struct *tty,
struct usb_serial_port *port, const unsigned char *buf, int count);
-extern void usb_serial_generic_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+extern void usb_serial_generic_close(struct usb_serial_port *port);
extern int usb_serial_generic_resume(struct usb_serial *serial);
extern int usb_serial_generic_write_room(struct tty_struct *tty);
extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty);
diff --git a/lib/Kconfig b/lib/Kconfig
index 8ade0a7..9960be0 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -10,6 +10,9 @@
config BITREVERSE
tristate
+config RATIONAL
+ boolean
+
config GENERIC_FIND_FIRST_BIT
bool
diff --git a/lib/Makefile b/lib/Makefile
index 33a40e4..1f6edef 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -50,6 +50,7 @@
endif
obj-$(CONFIG_BITREVERSE) += bitrev.o
+obj-$(CONFIG_RATIONAL) += rational.o
obj-$(CONFIG_CRC_CCITT) += crc-ccitt.o
obj-$(CONFIG_CRC16) += crc16.o
obj-$(CONFIG_CRC_T10DIF)+= crc-t10dif.o
diff --git a/lib/rational.c b/lib/rational.c
new file mode 100644
index 0000000..b3c099b
--- /dev/null
+++ b/lib/rational.c
@@ -0,0 +1,62 @@
+/*
+ * rational fractions
+ *
+ * Copyright (C) 2009 emlix GmbH, Oskar Schirmer <os@emlix.com>
+ *
+ * helper functions when coping with rational numbers
+ */
+
+#include <linux/rational.h>
+
+/*
+ * calculate best rational approximation for a given fraction
+ * taking into account restricted register size, e.g. to find
+ * appropriate values for a pll with 5 bit denominator and
+ * 8 bit numerator register fields, trying to set up with a
+ * frequency ratio of 3.1415, one would say:
+ *
+ * rational_best_approximation(31415, 10000,
+ * (1 << 8) - 1, (1 << 5) - 1, &n, &d);
+ *
+ * you may look at given_numerator as a fixed point number,
+ * with the fractional part size described in given_denominator.
+ *
+ * for theoretical background, see:
+ * http://en.wikipedia.org/wiki/Continued_fraction
+ */
+
+void rational_best_approximation(
+ unsigned long given_numerator, unsigned long given_denominator,
+ unsigned long max_numerator, unsigned long max_denominator,
+ unsigned long *best_numerator, unsigned long *best_denominator)
+{
+ unsigned long n, d, n0, d0, n1, d1;
+ n = given_numerator;
+ d = given_denominator;
+ n0 = d1 = 0;
+ n1 = d0 = 1;
+ for (;;) {
+ unsigned long t, a;
+ if ((n1 > max_numerator) || (d1 > max_denominator)) {
+ n1 = n0;
+ d1 = d0;
+ break;
+ }
+ if (d == 0)
+ break;
+ t = d;
+ a = n / d;
+ d = n % d;
+ n = t;
+ t = n0 + a * n1;
+ n0 = n1;
+ n1 = t;
+ t = d0 + a * d1;
+ d0 = d1;
+ d1 = t;
+ }
+ *best_numerator = n1;
+ *best_denominator = d1;
+}
+
+EXPORT_SYMBOL(rational_best_approximation);