| SMI (Smart Multimedia Interface) Local Arbiter |
| |
| The hardware block diagram please check bindings/iommu/mediatek,iommu.txt |
| |
| Required properties: |
| - compatible : must be one of : |
| "mediatek,mt8173-smi-larb" |
| "mediatek,mt2701-smi-larb" |
| - reg : the register and size of this local arbiter. |
| - mediatek,smi : a phandle to the smi_common node. |
| - power-domains : a phandle to the power domain of this local arbiter. |
| - clocks : Must contain an entry for each entry in clock-names. |
| - clock-names: must contain 2 entries, as follows: |
| - "apb" : Advanced Peripheral Bus clock, It's the clock for setting |
| the register. |
| - "smi" : It's the clock for transfer data and command. |
| |
| Example: |
| larb1: larb@16010000 { |
| compatible = "mediatek,mt8173-smi-larb"; |
| reg = <0 0x16010000 0 0x1000>; |
| mediatek,smi = <&smi_common>; |
| power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>; |
| clocks = <&vdecsys CLK_VDEC_CKEN>, |
| <&vdecsys CLK_VDEC_LARB_CKEN>; |
| clock-names = "apb", "smi"; |
| }; |