Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A small batch of fixes that have trickled in over the last week of the
merge window.
Also included are few small devicetree updates for sunxi, since it
enables me to use one of their newer boards (cubieboard2) for
additional test coverage. The support for that SoC is new for 3.12,
so there's no exposure to new regressions due to it"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: dts: sun7i: olinuxino-micro: Enable the EMAC
ARM: dts: sun7i: cubieboard2: Enable the EMAC
ARM: dts: sun7i: Add the muxing options for the EMAC
ARM: dts: sun7i: Enable the Ethernet in the A20
i2c: davinci: Fix bad dev_get_platdata() conversion
ARM: vexpress: allow dcscb and tc2_pm in a combined ARMv6+v7 build
ARM: shmobile: lager: Do not use register_type field of struct sh_eth_plat_data
ARM: pxa: ssp: Check return values from phandle lookups
ARM: PCI: versatile: Fix SMAP register offsets
ARM: PCI: versatile: Fix PCI I/O
ARM: PCI: versatile: Fix map_irq function to match hardware
ARM: ep93xx: Don't use modem interface on the second UART
ARM: shmobile: r8a7779: Update early timer initialisation order
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index 31b76f0..15e625e 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -19,6 +19,21 @@
compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
soc@01c00000 {
+ emac: ethernet@01c0b000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins_a>;
+ phy = <&phy1>;
+ status = "okay";
+ };
+
+ mdio@01c0b080 {
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+
pinctrl@01c20800 {
led_pins_cubieboard2: led_pins@0 {
allwinner,pins = "PH20", "PH21";
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index 34a6c02..9e77855 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -19,6 +19,21 @@
compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20";
soc@01c00000 {
+ emac: ethernet@01c0b000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins_a>;
+ phy = <&phy1>;
+ status = "okay";
+ };
+
+ mdio@01c0b080 {
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+
pinctrl@01c20800 {
led_pins_olinuxino: led_pins@0 {
allwinner,pins = "PH2";
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 999ff45..80559cb 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -167,6 +167,22 @@
#size-cells = <1>;
ranges;
+ emac: ethernet@01c0b000 {
+ compatible = "allwinner,sun4i-emac";
+ reg = <0x01c0b000 0x1000>;
+ interrupts = <0 55 1>;
+ clocks = <&ahb_gates 17>;
+ status = "disabled";
+ };
+
+ mdio@01c0b080 {
+ compatible = "allwinner,sun4i-mdio";
+ reg = <0x01c0b080 0x14>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
pio: pinctrl@01c20800 {
compatible = "allwinner,sun7i-a20-pinctrl";
reg = <0x01c20800 0x400>;
@@ -198,6 +214,17 @@
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
+ emac_pins_a: emac0@0 {
+ allwinner,pins = "PA0", "PA1", "PA2",
+ "PA3", "PA4", "PA5", "PA6",
+ "PA7", "PA8", "PA9", "PA10",
+ "PA11", "PA12", "PA13", "PA14",
+ "PA15", "PA16";
+ allwinner,function = "emac";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
};
timer@01c20c00 {
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index df8612f..3f12b88 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -281,7 +281,7 @@
{ IRQ_EP93XX_UART1 }, &ep93xx_uart_data);
static AMBA_APB_DEVICE(uart2, "apb:uart2", 0x00041010, EP93XX_UART2_PHYS_BASE,
- { IRQ_EP93XX_UART2 }, &ep93xx_uart_data);
+ { IRQ_EP93XX_UART2 }, NULL);
static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE,
{ IRQ_EP93XX_UART3 }, &ep93xx_uart_data);
diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index 4872939..ffb6f0a 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -96,7 +96,6 @@
static struct sh_eth_plat_data ether_pdata __initdata = {
.phy = 0x1,
.edmac_endian = EDMAC_LITTLE_ENDIAN,
- .register_type = SH_ETH_REG_FAST_RCAR,
.phy_interface = PHY_INTERFACE_MODE_RMII,
.ether_link_active_low = 1,
};
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index b5b2f78..ecd0148 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -691,8 +691,8 @@
void __init r8a7779_earlytimer_init(void)
{
r8a7779_clock_init();
- shmobile_earlytimer_init();
r8a7779_register_twd();
+ shmobile_earlytimer_init();
}
void __init r8a7779_add_early_devices(void)
diff --git a/arch/arm/mach-versatile/include/mach/platform.h b/arch/arm/mach-versatile/include/mach/platform.h
index ec08740..6f938cc 100644
--- a/arch/arm/mach-versatile/include/mach/platform.h
+++ b/arch/arm/mach-versatile/include/mach/platform.h
@@ -231,12 +231,14 @@
/* PCI space */
#define VERSATILE_PCI_BASE 0x41000000 /* PCI Interface */
#define VERSATILE_PCI_CFG_BASE 0x42000000
+#define VERSATILE_PCI_IO_BASE 0x43000000
#define VERSATILE_PCI_MEM_BASE0 0x44000000
#define VERSATILE_PCI_MEM_BASE1 0x50000000
#define VERSATILE_PCI_MEM_BASE2 0x60000000
/* Sizes of above maps */
#define VERSATILE_PCI_BASE_SIZE 0x01000000
#define VERSATILE_PCI_CFG_BASE_SIZE 0x02000000
+#define VERSATILE_PCI_IO_BASE_SIZE 0x01000000
#define VERSATILE_PCI_MEM_BASE0_SIZE 0x0c000000 /* 32Mb */
#define VERSATILE_PCI_MEM_BASE1_SIZE 0x10000000 /* 256Mb */
#define VERSATILE_PCI_MEM_BASE2_SIZE 0x10000000 /* 256Mb */
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index e92e5e0..c97be4e 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -43,9 +43,9 @@
#define PCI_IMAP0 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x0)
#define PCI_IMAP1 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x4)
#define PCI_IMAP2 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x8)
-#define PCI_SMAP0 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x10)
-#define PCI_SMAP1 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x14)
-#define PCI_SMAP2 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x18)
+#define PCI_SMAP0 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x14)
+#define PCI_SMAP1 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x18)
+#define PCI_SMAP2 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x1c)
#define PCI_SELFID __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0xc)
#define DEVICE_ID_OFFSET 0x00
@@ -170,8 +170,8 @@
.write = versatile_write_config,
};
-static struct resource io_mem = {
- .name = "PCI I/O space",
+static struct resource unused_mem = {
+ .name = "PCI unused",
.start = VERSATILE_PCI_MEM_BASE0,
.end = VERSATILE_PCI_MEM_BASE0+VERSATILE_PCI_MEM_BASE0_SIZE-1,
.flags = IORESOURCE_MEM,
@@ -195,9 +195,9 @@
{
int ret = 0;
- ret = request_resource(&iomem_resource, &io_mem);
+ ret = request_resource(&iomem_resource, &unused_mem);
if (ret) {
- printk(KERN_ERR "PCI: unable to allocate I/O "
+ printk(KERN_ERR "PCI: unable to allocate unused "
"memory region (%d)\n", ret);
goto out;
}
@@ -205,7 +205,7 @@
if (ret) {
printk(KERN_ERR "PCI: unable to allocate non-prefetchable "
"memory region (%d)\n", ret);
- goto release_io_mem;
+ goto release_unused_mem;
}
ret = request_resource(&iomem_resource, &pre_mem);
if (ret) {
@@ -225,8 +225,8 @@
release_non_mem:
release_resource(&non_mem);
- release_io_mem:
- release_resource(&io_mem);
+ release_unused_mem:
+ release_resource(&unused_mem);
out:
return ret;
}
@@ -246,7 +246,7 @@
goto out;
}
- ret = pci_ioremap_io(0, VERSATILE_PCI_MEM_BASE0);
+ ret = pci_ioremap_io(0, VERSATILE_PCI_IO_BASE);
if (ret)
goto out;
@@ -295,6 +295,19 @@
__raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_2);
/*
+ * For many years the kernel and QEMU were symbiotically buggy
+ * in that they both assumed the same broken IRQ mapping.
+ * QEMU therefore attempts to auto-detect old broken kernels
+ * so that they still work on newer QEMU as they did on old
+ * QEMU. Since we now use the correct (ie matching-hardware)
+ * IRQ mapping we write a definitely different value to a
+ * PCI_INTERRUPT_LINE register to tell QEMU that we expect
+ * real hardware behaviour and it need not be backwards
+ * compatible for us. This write is harmless on real hardware.
+ */
+ __raw_writel(0, VERSATILE_PCI_VIRT_BASE+PCI_INTERRUPT_LINE);
+
+ /*
* Do not to map Versatile FPGA PCI device into memory space
*/
pci_slot_ignore |= (1 << myslot);
@@ -327,13 +340,13 @@
{
int irq;
- /* slot, pin, irq
- * 24 1 IRQ_SIC_PCI0
- * 25 1 IRQ_SIC_PCI1
- * 26 1 IRQ_SIC_PCI2
- * 27 1 IRQ_SIC_PCI3
+ /*
+ * Slot INTA INTB INTC INTD
+ * 31 PCI1 PCI2 PCI3 PCI0
+ * 30 PCI0 PCI1 PCI2 PCI3
+ * 29 PCI3 PCI0 PCI1 PCI2
*/
- irq = IRQ_SIC_PCI0 + ((slot - 24 + pin - 1) & 3);
+ irq = IRQ_SIC_PCI0 + ((slot + 2 + pin - 1) & 3);
return irq;
}
diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile
index 36ea824..505e64a 100644
--- a/arch/arm/mach-vexpress/Makefile
+++ b/arch/arm/mach-vexpress/Makefile
@@ -7,6 +7,8 @@
obj-y := v2m.o
obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o
obj-$(CONFIG_ARCH_VEXPRESS_DCSCB) += dcscb.o dcscb_setup.o
+CFLAGS_dcscb.o += -march=armv7-a
obj-$(CONFIG_ARCH_VEXPRESS_TC2_PM) += tc2_pm.o spc.o
+CFLAGS_tc2_pm.o += -march=armv7-a
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
index c83f27b..3ea0290 100644
--- a/arch/arm/plat-pxa/ssp.c
+++ b/arch/arm/plat-pxa/ssp.c
@@ -132,6 +132,7 @@
if (dev->of_node) {
struct of_phandle_args dma_spec;
struct device_node *np = dev->of_node;
+ int ret;
/*
* FIXME: we should allocate the DMA channel from this
@@ -140,14 +141,23 @@
*/
/* rx */
- of_parse_phandle_with_args(np, "dmas", "#dma-cells",
- 0, &dma_spec);
+ ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells",
+ 0, &dma_spec);
+
+ if (ret) {
+ dev_err(dev, "Can't parse dmas property\n");
+ return -ENODEV;
+ }
ssp->drcmr_rx = dma_spec.args[0];
of_node_put(dma_spec.np);
/* tx */
- of_parse_phandle_with_args(np, "dmas", "#dma-cells",
- 1, &dma_spec);
+ ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells",
+ 1, &dma_spec);
+ if (ret) {
+ dev_err(dev, "Can't parse dmas property\n");
+ return -ENODEV;
+ }
ssp->drcmr_tx = dma_spec.args[0];
of_node_put(dma_spec.np);
} else {
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 5747341..132369f 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -662,7 +662,7 @@
#endif
dev->dev = &pdev->dev;
dev->irq = irq->start;
- dev->pdata = dev_get_platdata(&dev->dev);
+ dev->pdata = dev_get_platdata(&pdev->dev);
platform_set_drvdata(pdev, dev);
if (!dev->pdata && pdev->dev.of_node) {