diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 25c15cc..4f2e424 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -544,6 +544,9 @@
 	/* keys */
 	struct list_head key_list;
 
+	/* count for keys needing tailroom space allocation */
+	int crypto_tx_tailroom_needed_cnt;
+
 	struct net_device *dev;
 	struct ieee80211_local *local;
 
diff --git a/net/mac80211/key.c b/net/mac80211/key.c
index f825e2f..0af958c 100644
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -61,6 +61,36 @@
 	return NULL;
 }
 
+static void increment_tailroom_need_count(struct ieee80211_sub_if_data *sdata)
+{
+	/*
+	 * When this count is zero, SKB resizing for allocating tailroom
+	 * for IV or MMIC is skipped. But, this check has created two race
+	 * cases in xmit path while transiting from zero count to one:
+	 *
+	 * 1. SKB resize was skipped because no key was added but just before
+	 * the xmit key is added and SW encryption kicks off.
+	 *
+	 * 2. SKB resize was skipped because all the keys were hw planted but
+	 * just before xmit one of the key is deleted and SW encryption kicks
+	 * off.
+	 *
+	 * In both the above case SW encryption will find not enough space for
+	 * tailroom and exits with WARN_ON. (See WARN_ONs at wpa.c)
+	 *
+	 * Solution has been explained at
+	 * http://mid.gmane.org/1308590980.4322.19.camel@jlt3.sipsolutions.net
+	 */
+
+	if (!sdata->crypto_tx_tailroom_needed_cnt++) {
+		/*
+		 * Flush all XMIT packets currently using HW encryption or no
+		 * encryption at all if the count transition is from 0 -> 1.
+		 */
+		synchronize_net();
+	}
+}
+
 static int ieee80211_key_enable_hw_accel(struct ieee80211_key *key)
 {
 	struct ieee80211_sub_if_data *sdata;
@@ -101,6 +131,11 @@
 
 	if (!ret) {
 		key->flags |= KEY_FLAG_UPLOADED_TO_HARDWARE;
+
+		if (!((key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC) ||
+		      (key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV)))
+			sdata->crypto_tx_tailroom_needed_cnt--;
+
 		return 0;
 	}
 
@@ -142,6 +177,10 @@
 	sta = get_sta_for_key(key);
 	sdata = key->sdata;
 
+	if (!((key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC) ||
+	      (key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV)))
+		increment_tailroom_need_count(sdata);
+
 	if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
 		sdata = container_of(sdata->bss,
 				     struct ieee80211_sub_if_data,
@@ -394,8 +433,10 @@
 		ieee80211_aes_key_free(key->u.ccmp.tfm);
 	if (key->conf.cipher == WLAN_CIPHER_SUITE_AES_CMAC)
 		ieee80211_aes_cmac_key_free(key->u.aes_cmac.tfm);
-	if (key->local)
+	if (key->local) {
 		ieee80211_debugfs_key_remove(key);
+		key->sdata->crypto_tx_tailroom_needed_cnt--;
+	}
 
 	kfree(key);
 }
@@ -452,6 +493,8 @@
 	else
 		old_key = key_mtx_dereference(sdata->local, sdata->keys[idx]);
 
+	increment_tailroom_need_count(sdata);
+
 	__ieee80211_key_replace(sdata, sta, pairwise, old_key, key);
 	__ieee80211_key_destroy(old_key);
 
@@ -498,8 +541,12 @@
 
 	mutex_lock(&sdata->local->key_mtx);
 
-	list_for_each_entry(key, &sdata->key_list, list)
+	sdata->crypto_tx_tailroom_needed_cnt = 0;
+
+	list_for_each_entry(key, &sdata->key_list, list) {
+		increment_tailroom_need_count(sdata);
 		ieee80211_key_enable_hw_accel(key);
+	}
 
 	mutex_unlock(&sdata->local->key_mtx);
 }
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 3104c84..e8d0d2d 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1474,18 +1474,14 @@
 
 /* device xmit handlers */
 
-static int ieee80211_skb_resize(struct ieee80211_local *local,
+static int ieee80211_skb_resize(struct ieee80211_sub_if_data *sdata,
 				struct sk_buff *skb,
 				int head_need, bool may_encrypt)
 {
+	struct ieee80211_local *local = sdata->local;
 	int tail_need = 0;
 
-	/*
-	 * This could be optimised, devices that do full hardware
-	 * crypto (including TKIP MMIC) need no tailroom... But we
-	 * have no drivers for such devices currently.
-	 */
-	if (may_encrypt) {
+	if (may_encrypt && sdata->crypto_tx_tailroom_needed_cnt) {
 		tail_need = IEEE80211_ENCRYPT_TAILROOM;
 		tail_need -= skb_tailroom(skb);
 		tail_need = max_t(int, tail_need, 0);
@@ -1578,7 +1574,7 @@
 	headroom -= skb_headroom(skb);
 	headroom = max_t(int, 0, headroom);
 
-	if (ieee80211_skb_resize(local, skb, headroom, may_encrypt)) {
+	if (ieee80211_skb_resize(sdata, skb, headroom, may_encrypt)) {
 		dev_kfree_skb(skb);
 		rcu_read_unlock();
 		return;
@@ -1945,7 +1941,7 @@
 		head_need += IEEE80211_ENCRYPT_HEADROOM;
 		head_need += local->tx_headroom;
 		head_need = max_t(int, 0, head_need);
-		if (ieee80211_skb_resize(local, skb, head_need, true))
+		if (ieee80211_skb_resize(sdata, skb, head_need, true))
 			goto fail;
 	}