RealView: Move more device address definitions to board-eb.h
The upcoming PB11MPCore and PB1176 have different memory maps and some
of the definitions in platform.h are no longer common. This patch
moves them to the board-eb.h file and updates their usage in
realview_eb.c.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index f970c9f..247b556 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -136,12 +136,12 @@
/*
* These devices are connected directly to the multi-layer AHB switch
*/
-#define SMC_IRQ { NO_IRQ, NO_IRQ }
-#define SMC_DMA { 0, 0 }
+#define EB_SMC_IRQ { NO_IRQ, NO_IRQ }
+#define EB_SMC_DMA { 0, 0 }
#define MPMC_IRQ { NO_IRQ, NO_IRQ }
#define MPMC_DMA { 0, 0 }
-#define CLCD_IRQ { IRQ_EB_CLCD, NO_IRQ }
-#define CLCD_DMA { 0, 0 }
+#define EB_CLCD_IRQ { IRQ_EB_CLCD, NO_IRQ }
+#define EB_CLCD_DMA { 0, 0 }
#define DMAC_IRQ { IRQ_EB_DMA, NO_IRQ }
#define DMAC_DMA { 0, 0 }
@@ -150,14 +150,14 @@
*/
#define SCTL_IRQ { NO_IRQ, NO_IRQ }
#define SCTL_DMA { 0, 0 }
-#define WATCHDOG_IRQ { IRQ_EB_WDOG, NO_IRQ }
-#define WATCHDOG_DMA { 0, 0 }
-#define GPIO0_IRQ { IRQ_EB_GPIO0, NO_IRQ }
-#define GPIO0_DMA { 0, 0 }
+#define EB_WATCHDOG_IRQ { IRQ_EB_WDOG, NO_IRQ }
+#define EB_WATCHDOG_DMA { 0, 0 }
+#define EB_GPIO0_IRQ { IRQ_EB_GPIO0, NO_IRQ }
+#define EB_GPIO0_DMA { 0, 0 }
#define GPIO1_IRQ { IRQ_EB_GPIO1, NO_IRQ }
#define GPIO1_DMA { 0, 0 }
-#define RTC_IRQ { IRQ_EB_RTC, NO_IRQ }
-#define RTC_DMA { 0, 0 }
+#define EB_RTC_IRQ { IRQ_EB_RTC, NO_IRQ }
+#define EB_RTC_DMA { 0, 0 }
/*
* These devices are connected via the DMA APB bridge
@@ -172,8 +172,8 @@
#define EB_UART2_DMA { 11, 10 }
#define EB_UART3_IRQ { IRQ_EB_UART3, NO_IRQ }
#define EB_UART3_DMA { 0x86, 0x87 }
-#define SSP_IRQ { IRQ_EB_SSP, NO_IRQ }
-#define SSP_DMA { 9, 8 }
+#define EB_SSP_IRQ { IRQ_EB_SSP, NO_IRQ }
+#define EB_SSP_DMA { 9, 8 }
/* FPGA Primecells */
AMBA_DEVICE(aaci, "fpga:04", AACI, NULL);
@@ -183,20 +183,20 @@
AMBA_DEVICE(uart3, "fpga:09", EB_UART3, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:00", SMC, NULL);
-AMBA_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data);
+AMBA_DEVICE(smc, "dev:00", EB_SMC, NULL);
+AMBA_DEVICE(clcd, "dev:20", EB_CLCD, &clcd_plat_data);
AMBA_DEVICE(dmac, "dev:30", DMAC, NULL);
AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:e1", WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", GPIO0, NULL);
+AMBA_DEVICE(wdog, "dev:e1", EB_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0, "dev:e4", EB_GPIO0, NULL);
AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL);
AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL);
-AMBA_DEVICE(rtc, "dev:e8", RTC, NULL);
+AMBA_DEVICE(rtc, "dev:e8", EB_RTC, NULL);
AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
AMBA_DEVICE(uart0, "dev:f1", EB_UART0, NULL);
AMBA_DEVICE(uart1, "dev:f2", EB_UART1, NULL);
AMBA_DEVICE(uart2, "dev:f3", EB_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:f4", SSP, NULL);
+AMBA_DEVICE(ssp0, "dev:f4", EB_SSP, NULL);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
@@ -231,8 +231,8 @@
static struct resource realview_eb_eth_resources[] = {
[0] = {
- .start = REALVIEW_ETH_BASE,
- .end = REALVIEW_ETH_BASE + SZ_64K - 1,
+ .start = REALVIEW_EB_ETH_BASE,
+ .end = REALVIEW_EB_ETH_BASE + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -254,7 +254,7 @@
*/
static int eth_device_register(void)
{
- void __iomem *eth_addr = ioremap(REALVIEW_ETH_BASE, SZ_4K);
+ void __iomem *eth_addr = ioremap(REALVIEW_EB_ETH_BASE, SZ_4K);
u32 idrev;
if (!eth_addr)