| /* |
| * linux/arch/arm/mach-omap2/timer.c |
| * |
| * OMAP2 GP timer support. |
| * |
| * Copyright (C) 2009 Nokia Corporation |
| * |
| * Update to use new clocksource/clockevent layers |
| * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> |
| * Copyright (C) 2007 MontaVista Software, Inc. |
| * |
| * Original driver: |
| * Copyright (C) 2005 Nokia Corporation |
| * Author: Paul Mundt <paul.mundt@nokia.com> |
| * Juha Yrjölä <juha.yrjola@nokia.com> |
| * OMAP Dual-mode timer framework support by Timo Teras |
| * |
| * Some parts based off of TI's 24xx code: |
| * |
| * Copyright (C) 2004-2009 Texas Instruments, Inc. |
| * |
| * Roughly modelled after the OMAP1 MPU timer code. |
| * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| */ |
| #include <linux/init.h> |
| #include <linux/time.h> |
| #include <linux/interrupt.h> |
| #include <linux/err.h> |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/irq.h> |
| #include <linux/clocksource.h> |
| #include <linux/clockchips.h> |
| #include <linux/slab.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include <linux/platform_device.h> |
| #include <linux/platform_data/dmtimer-omap.h> |
| #include <linux/sched_clock.h> |
| |
| #include <asm/mach/time.h> |
| #include <asm/smp_twd.h> |
| |
| #include "omap_hwmod.h" |
| #include "omap_device.h" |
| #include <plat/counter-32k.h> |
| #include <plat/dmtimer.h> |
| #include "omap-pm.h" |
| |
| #include "soc.h" |
| #include "common.h" |
| #include "powerdomain.h" |
| |
| #define REALTIME_COUNTER_BASE 0x48243200 |
| #define INCREMENTER_NUMERATOR_OFFSET 0x10 |
| #define INCREMENTER_DENUMERATOR_RELOAD_OFFSET 0x14 |
| #define NUMERATOR_DENUMERATOR_MASK 0xfffff000 |
| |
| /* Clockevent code */ |
| |
| static struct omap_dm_timer clkev; |
| static struct clock_event_device clockevent_gpt; |
| |
| static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id) |
| { |
| struct clock_event_device *evt = &clockevent_gpt; |
| |
| __omap_dm_timer_write_status(&clkev, OMAP_TIMER_INT_OVERFLOW); |
| |
| evt->event_handler(evt); |
| return IRQ_HANDLED; |
| } |
| |
| static struct irqaction omap2_gp_timer_irq = { |
| .name = "gp_timer", |
| .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, |
| .handler = omap2_gp_timer_interrupt, |
| }; |
| |
| static int omap2_gp_timer_set_next_event(unsigned long cycles, |
| struct clock_event_device *evt) |
| { |
| __omap_dm_timer_load_start(&clkev, OMAP_TIMER_CTRL_ST, |
| 0xffffffff - cycles, OMAP_TIMER_POSTED); |
| |
| return 0; |
| } |
| |
| static void omap2_gp_timer_set_mode(enum clock_event_mode mode, |
| struct clock_event_device *evt) |
| { |
| u32 period; |
| |
| __omap_dm_timer_stop(&clkev, OMAP_TIMER_POSTED, clkev.rate); |
| |
| switch (mode) { |
| case CLOCK_EVT_MODE_PERIODIC: |
| period = clkev.rate / HZ; |
| period -= 1; |
| /* Looks like we need to first set the load value separately */ |
| __omap_dm_timer_write(&clkev, OMAP_TIMER_LOAD_REG, |
| 0xffffffff - period, OMAP_TIMER_POSTED); |
| __omap_dm_timer_load_start(&clkev, |
| OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST, |
| 0xffffffff - period, OMAP_TIMER_POSTED); |
| break; |
| case CLOCK_EVT_MODE_ONESHOT: |
| break; |
| case CLOCK_EVT_MODE_UNUSED: |
| case CLOCK_EVT_MODE_SHUTDOWN: |
| case CLOCK_EVT_MODE_RESUME: |
| break; |
| } |
| } |
| |
| static struct clock_event_device clockevent_gpt = { |
| .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, |
| .rating = 300, |
| .set_next_event = omap2_gp_timer_set_next_event, |
| .set_mode = omap2_gp_timer_set_mode, |
| }; |
| |
| static struct property device_disabled = { |
| .name = "status", |
| .length = sizeof("disabled"), |
| .value = "disabled", |
| }; |
| |
| static struct of_device_id omap_timer_match[] __initdata = { |
| { .compatible = "ti,omap2420-timer", }, |
| { .compatible = "ti,omap3430-timer", }, |
| { .compatible = "ti,omap4430-timer", }, |
| { .compatible = "ti,omap5430-timer", }, |
| { .compatible = "ti,am335x-timer", }, |
| { .compatible = "ti,am335x-timer-1ms", }, |
| { } |
| }; |
| |
| /** |
| * omap_get_timer_dt - get a timer using device-tree |
| * @match - device-tree match structure for matching a device type |
| * @property - optional timer property to match |
| * |
| * Helper function to get a timer during early boot using device-tree for use |
| * as kernel system timer. Optionally, the property argument can be used to |
| * select a timer with a specific property. Once a timer is found then mark |
| * the timer node in device-tree as disabled, to prevent the kernel from |
| * registering this timer as a platform device and so no one else can use it. |
| */ |
| static struct device_node * __init omap_get_timer_dt(struct of_device_id *match, |
| const char *property) |
| { |
| struct device_node *np; |
| |
| for_each_matching_node(np, match) { |
| if (!of_device_is_available(np)) |
| continue; |
| |
| if (property && !of_get_property(np, property, NULL)) |
| continue; |
| |
| if (!property && (of_get_property(np, "ti,timer-alwon", NULL) || |
| of_get_property(np, "ti,timer-dsp", NULL) || |
| of_get_property(np, "ti,timer-pwm", NULL) || |
| of_get_property(np, "ti,timer-secure", NULL))) |
| continue; |
| |
| of_add_property(np, &device_disabled); |
| return np; |
| } |
| |
| return NULL; |
| } |
| |
| /** |
| * omap_dmtimer_init - initialisation function when device tree is used |
| * |
| * For secure OMAP3 devices, timers with device type "timer-secure" cannot |
| * be used by the kernel as they are reserved. Therefore, to prevent the |
| * kernel registering these devices remove them dynamically from the device |
| * tree on boot. |
| */ |
| static void __init omap_dmtimer_init(void) |
| { |
| struct device_node *np; |
| |
| if (!cpu_is_omap34xx()) |
| return; |
| |
| /* If we are a secure device, remove any secure timer nodes */ |
| if ((omap_type() != OMAP2_DEVICE_TYPE_GP)) { |
| np = omap_get_timer_dt(omap_timer_match, "ti,timer-secure"); |
| if (np) |
| of_node_put(np); |
| } |
| } |
| |
| /** |
| * omap_dm_timer_get_errata - get errata flags for a timer |
| * |
| * Get the timer errata flags that are specific to the OMAP device being used. |
| */ |
| static u32 __init omap_dm_timer_get_errata(void) |
| { |
| if (cpu_is_omap24xx()) |
| return 0; |
| |
| return OMAP_TIMER_ERRATA_I103_I767; |
| } |
| |
| static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, |
| const char *fck_source, |
| const char *property, |
| const char **timer_name, |
| int posted) |
| { |
| char name[10]; /* 10 = sizeof("gptXX_Xck0") */ |
| const char *oh_name; |
| struct device_node *np; |
| struct omap_hwmod *oh; |
| struct resource irq, mem; |
| struct clk *src; |
| int r = 0; |
| |
| if (of_have_populated_dt()) { |
| np = omap_get_timer_dt(omap_timer_match, property); |
| if (!np) |
| return -ENODEV; |
| |
| of_property_read_string_index(np, "ti,hwmods", 0, &oh_name); |
| if (!oh_name) |
| return -ENODEV; |
| |
| timer->irq = irq_of_parse_and_map(np, 0); |
| if (!timer->irq) |
| return -ENXIO; |
| |
| timer->io_base = of_iomap(np, 0); |
| |
| of_node_put(np); |
| } else { |
| if (omap_dm_timer_reserve_systimer(timer->id)) |
| return -ENODEV; |
| |
| sprintf(name, "timer%d", timer->id); |
| oh_name = name; |
| } |
| |
| oh = omap_hwmod_lookup(oh_name); |
| if (!oh) |
| return -ENODEV; |
| |
| *timer_name = oh->name; |
| |
| if (!of_have_populated_dt()) { |
| r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL, |
| &irq); |
| if (r) |
| return -ENXIO; |
| timer->irq = irq.start; |
| |
| r = omap_hwmod_get_resource_byname(oh, IORESOURCE_MEM, NULL, |
| &mem); |
| if (r) |
| return -ENXIO; |
| |
| /* Static mapping, never released */ |
| timer->io_base = ioremap(mem.start, mem.end - mem.start); |
| } |
| |
| if (!timer->io_base) |
| return -ENXIO; |
| |
| /* After the dmtimer is using hwmod these clocks won't be needed */ |
| timer->fclk = clk_get(NULL, omap_hwmod_get_main_clk(oh)); |
| if (IS_ERR(timer->fclk)) |
| return PTR_ERR(timer->fclk); |
| |
| src = clk_get(NULL, fck_source); |
| if (IS_ERR(src)) |
| return PTR_ERR(src); |
| |
| if (clk_get_parent(timer->fclk) != src) { |
| r = clk_set_parent(timer->fclk, src); |
| if (r < 0) { |
| pr_warn("%s: %s cannot set source\n", __func__, |
| oh->name); |
| clk_put(src); |
| return r; |
| } |
| } |
| |
| clk_put(src); |
| |
| omap_hwmod_setup_one(oh_name); |
| omap_hwmod_enable(oh); |
| __omap_dm_timer_init_regs(timer); |
| |
| if (posted) |
| __omap_dm_timer_enable_posted(timer); |
| |
| /* Check that the intended posted configuration matches the actual */ |
| if (posted != timer->posted) |
| return -EINVAL; |
| |
| timer->rate = clk_get_rate(timer->fclk); |
| timer->reserved = 1; |
| |
| return r; |
| } |
| |
| static void __init omap2_gp_clockevent_init(int gptimer_id, |
| const char *fck_source, |
| const char *property) |
| { |
| int res; |
| |
| clkev.id = gptimer_id; |
| clkev.errata = omap_dm_timer_get_errata(); |
| |
| /* |
| * For clock-event timers we never read the timer counter and |
| * so we are not impacted by errata i103 and i767. Therefore, |
| * we can safely ignore this errata for clock-event timers. |
| */ |
| __omap_dm_timer_override_errata(&clkev, OMAP_TIMER_ERRATA_I103_I767); |
| |
| res = omap_dm_timer_init_one(&clkev, fck_source, property, |
| &clockevent_gpt.name, OMAP_TIMER_POSTED); |
| BUG_ON(res); |
| |
| omap2_gp_timer_irq.dev_id = &clkev; |
| setup_irq(clkev.irq, &omap2_gp_timer_irq); |
| |
| __omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW); |
| |
| clockevent_gpt.cpumask = cpu_possible_mask; |
| clockevent_gpt.irq = omap_dm_timer_get_irq(&clkev); |
| clockevents_config_and_register(&clockevent_gpt, clkev.rate, |
| 3, /* Timer internal resynch latency */ |
| 0xffffffff); |
| |
| pr_info("OMAP clockevent source: %s at %lu Hz\n", clockevent_gpt.name, |
| clkev.rate); |
| } |
| |
| /* Clocksource code */ |
| static struct omap_dm_timer clksrc; |
| static bool use_gptimer_clksrc; |
| |
| /* |
| * clocksource |
| */ |
| static cycle_t clocksource_read_cycles(struct clocksource *cs) |
| { |
| return (cycle_t)__omap_dm_timer_read_counter(&clksrc, |
| OMAP_TIMER_NONPOSTED); |
| } |
| |
| static struct clocksource clocksource_gpt = { |
| .rating = 300, |
| .read = clocksource_read_cycles, |
| .mask = CLOCKSOURCE_MASK(32), |
| .flags = CLOCK_SOURCE_IS_CONTINUOUS, |
| }; |
| |
| static u32 notrace dmtimer_read_sched_clock(void) |
| { |
| if (clksrc.reserved) |
| return __omap_dm_timer_read_counter(&clksrc, |
| OMAP_TIMER_NONPOSTED); |
| |
| return 0; |
| } |
| |
| static struct of_device_id omap_counter_match[] __initdata = { |
| { .compatible = "ti,omap-counter32k", }, |
| { } |
| }; |
| |
| /* Setup free-running counter for clocksource */ |
| static int __init __maybe_unused omap2_sync32k_clocksource_init(void) |
| { |
| int ret; |
| struct device_node *np = NULL; |
| struct omap_hwmod *oh; |
| void __iomem *vbase; |
| const char *oh_name = "counter_32k"; |
| |
| /* |
| * If device-tree is present, then search the DT blob |
| * to see if the 32kHz counter is supported. |
| */ |
| if (of_have_populated_dt()) { |
| np = omap_get_timer_dt(omap_counter_match, NULL); |
| if (!np) |
| return -ENODEV; |
| |
| of_property_read_string_index(np, "ti,hwmods", 0, &oh_name); |
| if (!oh_name) |
| return -ENODEV; |
| } |
| |
| /* |
| * First check hwmod data is available for sync32k counter |
| */ |
| oh = omap_hwmod_lookup(oh_name); |
| if (!oh || oh->slaves_cnt == 0) |
| return -ENODEV; |
| |
| omap_hwmod_setup_one(oh_name); |
| |
| if (np) { |
| vbase = of_iomap(np, 0); |
| of_node_put(np); |
| } else { |
| vbase = omap_hwmod_get_mpu_rt_va(oh); |
| } |
| |
| if (!vbase) { |
| pr_warn("%s: failed to get counter_32k resource\n", __func__); |
| return -ENXIO; |
| } |
| |
| ret = omap_hwmod_enable(oh); |
| if (ret) { |
| pr_warn("%s: failed to enable counter_32k module (%d)\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| ret = omap_init_clocksource_32k(vbase); |
| if (ret) { |
| pr_warn("%s: failed to initialize counter_32k as a clocksource (%d)\n", |
| __func__, ret); |
| omap_hwmod_idle(oh); |
| } |
| |
| return ret; |
| } |
| |
| static void __init omap2_gptimer_clocksource_init(int gptimer_id, |
| const char *fck_source, |
| const char *property) |
| { |
| int res; |
| |
| clksrc.id = gptimer_id; |
| clksrc.errata = omap_dm_timer_get_errata(); |
| |
| res = omap_dm_timer_init_one(&clksrc, fck_source, property, |
| &clocksource_gpt.name, |
| OMAP_TIMER_NONPOSTED); |
| BUG_ON(res); |
| |
| __omap_dm_timer_load_start(&clksrc, |
| OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, |
| OMAP_TIMER_NONPOSTED); |
| setup_sched_clock(dmtimer_read_sched_clock, 32, clksrc.rate); |
| |
| if (clocksource_register_hz(&clocksource_gpt, clksrc.rate)) |
| pr_err("Could not register clocksource %s\n", |
| clocksource_gpt.name); |
| else |
| pr_info("OMAP clocksource: %s at %lu Hz\n", |
| clocksource_gpt.name, clksrc.rate); |
| } |
| |
| #ifdef CONFIG_SOC_HAS_REALTIME_COUNTER |
| /* |
| * The realtime counter also called master counter, is a free-running |
| * counter, which is related to real time. It produces the count used |
| * by the CPU local timer peripherals in the MPU cluster. The timer counts |
| * at a rate of 6.144 MHz. Because the device operates on different clocks |
| * in different power modes, the master counter shifts operation between |
| * clocks, adjusting the increment per clock in hardware accordingly to |
| * maintain a constant count rate. |
| */ |
| static void __init realtime_counter_init(void) |
| { |
| void __iomem *base; |
| static struct clk *sys_clk; |
| unsigned long rate; |
| unsigned int reg, num, den; |
| |
| base = ioremap(REALTIME_COUNTER_BASE, SZ_32); |
| if (!base) { |
| pr_err("%s: ioremap failed\n", __func__); |
| return; |
| } |
| sys_clk = clk_get(NULL, "sys_clkin"); |
| if (IS_ERR(sys_clk)) { |
| pr_err("%s: failed to get system clock handle\n", __func__); |
| iounmap(base); |
| return; |
| } |
| |
| rate = clk_get_rate(sys_clk); |
| /* Numerator/denumerator values refer TRM Realtime Counter section */ |
| switch (rate) { |
| case 1200000: |
| num = 64; |
| den = 125; |
| break; |
| case 1300000: |
| num = 768; |
| den = 1625; |
| break; |
| case 19200000: |
| num = 8; |
| den = 25; |
| break; |
| case 2600000: |
| num = 384; |
| den = 1625; |
| break; |
| case 2700000: |
| num = 256; |
| den = 1125; |
| break; |
| case 38400000: |
| default: |
| /* Program it for 38.4 MHz */ |
| num = 4; |
| den = 25; |
| break; |
| } |
| |
| /* Program numerator and denumerator registers */ |
| reg = __raw_readl(base + INCREMENTER_NUMERATOR_OFFSET) & |
| NUMERATOR_DENUMERATOR_MASK; |
| reg |= num; |
| __raw_writel(reg, base + INCREMENTER_NUMERATOR_OFFSET); |
| |
| reg = __raw_readl(base + INCREMENTER_NUMERATOR_OFFSET) & |
| NUMERATOR_DENUMERATOR_MASK; |
| reg |= den; |
| __raw_writel(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET); |
| |
| iounmap(base); |
| } |
| #else |
| static inline void __init realtime_counter_init(void) |
| {} |
| #endif |
| |
| #define OMAP_SYS_GP_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \ |
| clksrc_nr, clksrc_src, clksrc_prop) \ |
| void __init omap##name##_gptimer_timer_init(void) \ |
| { \ |
| if (omap_clk_init) \ |
| omap_clk_init(); \ |
| omap_dmtimer_init(); \ |
| omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ |
| omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src, \ |
| clksrc_prop); \ |
| } |
| |
| #define OMAP_SYS_32K_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \ |
| clksrc_nr, clksrc_src, clksrc_prop) \ |
| void __init omap##name##_sync32k_timer_init(void) \ |
| { \ |
| if (omap_clk_init) \ |
| omap_clk_init(); \ |
| omap_dmtimer_init(); \ |
| omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ |
| /* Enable the use of clocksource="gp_timer" kernel parameter */ \ |
| if (use_gptimer_clksrc) \ |
| omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src, \ |
| clksrc_prop); \ |
| else \ |
| omap2_sync32k_clocksource_init(); \ |
| } |
| |
| #ifdef CONFIG_ARCH_OMAP2 |
| OMAP_SYS_32K_TIMER_INIT(2, 1, "timer_32k_ck", "ti,timer-alwon", |
| 2, "timer_sys_ck", NULL); |
| #endif /* CONFIG_ARCH_OMAP2 */ |
| |
| #ifdef CONFIG_ARCH_OMAP3 |
| OMAP_SYS_32K_TIMER_INIT(3, 1, "timer_32k_ck", "ti,timer-alwon", |
| 2, "timer_sys_ck", NULL); |
| OMAP_SYS_32K_TIMER_INIT(3_secure, 12, "secure_32k_fck", "ti,timer-secure", |
| 2, "timer_sys_ck", NULL); |
| #endif /* CONFIG_ARCH_OMAP3 */ |
| |
| #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) |
| OMAP_SYS_GP_TIMER_INIT(3, 2, "timer_sys_ck", NULL, |
| 1, "timer_sys_ck", "ti,timer-alwon"); |
| #endif |
| |
| #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) |
| static OMAP_SYS_32K_TIMER_INIT(4, 1, "timer_32k_ck", "ti,timer-alwon", |
| 2, "sys_clkin_ck", NULL); |
| #endif |
| |
| #ifdef CONFIG_ARCH_OMAP4 |
| #ifdef CONFIG_LOCAL_TIMERS |
| static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, OMAP44XX_LOCAL_TWD_BASE, 29); |
| void __init omap4_local_timer_init(void) |
| { |
| omap4_sync32k_timer_init(); |
| /* Local timers are not supprted on OMAP4430 ES1.0 */ |
| if (omap_rev() != OMAP4430_REV_ES1_0) { |
| int err; |
| |
| if (of_have_populated_dt()) { |
| clocksource_of_init(); |
| return; |
| } |
| |
| err = twd_local_timer_register(&twd_local_timer); |
| if (err) |
| pr_err("twd_local_timer_register failed %d\n", err); |
| } |
| } |
| #else /* CONFIG_LOCAL_TIMERS */ |
| void __init omap4_local_timer_init(void) |
| { |
| omap4_sync32k_timer_init(); |
| } |
| #endif /* CONFIG_LOCAL_TIMERS */ |
| #endif /* CONFIG_ARCH_OMAP4 */ |
| |
| #ifdef CONFIG_SOC_OMAP5 |
| void __init omap5_realtime_timer_init(void) |
| { |
| omap4_sync32k_timer_init(); |
| realtime_counter_init(); |
| |
| clocksource_of_init(); |
| } |
| #endif /* CONFIG_SOC_OMAP5 */ |
| |
| /** |
| * omap_timer_init - build and register timer device with an |
| * associated timer hwmod |
| * @oh: timer hwmod pointer to be used to build timer device |
| * @user: parameter that can be passed from calling hwmod API |
| * |
| * Called by omap_hwmod_for_each_by_class to register each of the timer |
| * devices present in the system. The number of timer devices is known |
| * by parsing through the hwmod database for a given class name. At the |
| * end of function call memory is allocated for timer device and it is |
| * registered to the framework ready to be proved by the driver. |
| */ |
| static int __init omap_timer_init(struct omap_hwmod *oh, void *unused) |
| { |
| int id; |
| int ret = 0; |
| char *name = "omap_timer"; |
| struct dmtimer_platform_data *pdata; |
| struct platform_device *pdev; |
| struct omap_timer_capability_dev_attr *timer_dev_attr; |
| |
| pr_debug("%s: %s\n", __func__, oh->name); |
| |
| /* on secure device, do not register secure timer */ |
| timer_dev_attr = oh->dev_attr; |
| if (omap_type() != OMAP2_DEVICE_TYPE_GP && timer_dev_attr) |
| if (timer_dev_attr->timer_capability == OMAP_TIMER_SECURE) |
| return ret; |
| |
| pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); |
| if (!pdata) { |
| pr_err("%s: No memory for [%s]\n", __func__, oh->name); |
| return -ENOMEM; |
| } |
| |
| /* |
| * Extract the IDs from name field in hwmod database |
| * and use the same for constructing ids' for the |
| * timer devices. In a way, we are avoiding usage of |
| * static variable witin the function to do the same. |
| * CAUTION: We have to be careful and make sure the |
| * name in hwmod database does not change in which case |
| * we might either make corresponding change here or |
| * switch back static variable mechanism. |
| */ |
| sscanf(oh->name, "timer%2d", &id); |
| |
| if (timer_dev_attr) |
| pdata->timer_capability = timer_dev_attr->timer_capability; |
| |
| pdata->timer_errata = omap_dm_timer_get_errata(); |
| pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count; |
| |
| pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata)); |
| |
| if (IS_ERR(pdev)) { |
| pr_err("%s: Can't build omap_device for %s: %s.\n", |
| __func__, name, oh->name); |
| ret = -EINVAL; |
| } |
| |
| kfree(pdata); |
| |
| return ret; |
| } |
| |
| /** |
| * omap2_dm_timer_init - top level regular device initialization |
| * |
| * Uses dedicated hwmod api to parse through hwmod database for |
| * given class name and then build and register the timer device. |
| */ |
| static int __init omap2_dm_timer_init(void) |
| { |
| int ret; |
| |
| /* If dtb is there, the devices will be created dynamically */ |
| if (of_have_populated_dt()) |
| return -ENODEV; |
| |
| ret = omap_hwmod_for_each_by_class("timer", omap_timer_init, NULL); |
| if (unlikely(ret)) { |
| pr_err("%s: device registration failed.\n", __func__); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| omap_arch_initcall(omap2_dm_timer_init); |
| |
| /** |
| * omap2_override_clocksource - clocksource override with user configuration |
| * |
| * Allows user to override default clocksource, using kernel parameter |
| * clocksource="gp_timer" (For all OMAP2PLUS architectures) |
| * |
| * Note that, here we are using same standard kernel parameter "clocksource=", |
| * and not introducing any OMAP specific interface. |
| */ |
| static int __init omap2_override_clocksource(char *str) |
| { |
| if (!str) |
| return 0; |
| /* |
| * For OMAP architecture, we only have two options |
| * - sync_32k (default) |
| * - gp_timer (sys_clk based) |
| */ |
| if (!strcmp(str, "gp_timer")) |
| use_gptimer_clksrc = true; |
| |
| return 0; |
| } |
| early_param("clocksource", omap2_override_clocksource); |