Merge branch 'ppc_kconfig' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.22
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index ec092b7..20a8fdca 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -372,383 +372,7 @@
source "init/Kconfig"
-menu "Platform support"
- depends on PPC64 || CLASSIC32
-
-choice
- prompt "Machine type"
- default PPC_MULTIPLATFORM
-
-config PPC_MULTIPLATFORM
- bool "Generic desktop/server/laptop"
- help
- Select this option if configuring for an IBM pSeries or
- RS/6000 machine, an Apple machine, or a PReP, CHRP,
- Maple or Cell-based machine.
-
-config EMBEDDED6xx
- bool "Embedded 6xx/7xx/7xxx-based board"
- depends on PPC32 && (BROKEN||BROKEN_ON_SMP)
-
-config APUS
- bool "Amiga-APUS"
- depends on PPC32 && BROKEN
- help
- Select APUS if configuring for a PowerUP Amiga.
- More information is available at:
- <http://linux-apus.sourceforge.net/>.
-endchoice
-
-config QUICC_ENGINE
- bool
- depends on PPC_MPC836x || PPC_MPC832x
- default y
- help
- The QUICC Engine (QE) is a new generation of communications
- coprocessors on Freescale embedded CPUs (akin to CPM in older chips).
- Selecting this option means that you wish to build a kernel
- for a machine with a QE coprocessor.
-
-config PPC_PSERIES
- depends on PPC_MULTIPLATFORM && PPC64
- bool "IBM pSeries & new (POWER5-based) iSeries"
- select MPIC
- select PPC_I8259
- select PPC_RTAS
- select RTAS_ERROR_LOGGING
- select PPC_UDBG_16550
- select PPC_NATIVE
- default y
-
-config PPC_ISERIES
- bool "IBM Legacy iSeries"
- depends on PPC_MULTIPLATFORM && PPC64
- select PPC_INDIRECT_IO
-
-config PPC_CHRP
- bool "Common Hardware Reference Platform (CHRP) based machines"
- depends on PPC_MULTIPLATFORM && PPC32
- select MPIC
- select PPC_I8259
- select PPC_INDIRECT_PCI
- select PPC_RTAS
- select PPC_MPC106
- select PPC_UDBG_16550
- select PPC_NATIVE
- default y
-
-config PPC_MPC52xx
- bool
- default n
-
-config PPC_MPC5200
- bool
- select PPC_MPC52xx
- default n
-
-config PPC_MPC5200_BUGFIX
- bool "MPC5200 (L25R) bugfix support"
- depends on PPC_MPC5200
- default n
- help
- Enable workarounds for original MPC5200 errata. This is not required
- for MPC5200B based boards.
-
- It is safe to say 'Y' here
-
-config PPC_EFIKA
- bool "bPlan Efika 5k2. MPC5200B based computer"
- depends on PPC_MULTIPLATFORM && PPC32
- select PPC_RTAS
- select RTAS_PROC
- select PPC_MPC52xx
- select PPC_NATIVE
- default n
-
-config PPC_LITE5200
- bool "Freescale Lite5200 Eval Board"
- depends on PPC_MULTIPLATFORM && PPC32
- select PPC_MPC5200
- default n
-
-config PPC_PMAC
- bool "Apple PowerMac based machines"
- depends on PPC_MULTIPLATFORM
- select MPIC
- select PPC_INDIRECT_PCI if PPC32
- select PPC_MPC106 if PPC32
- select PPC_NATIVE
- default y
-
-config PPC_PMAC64
- bool
- depends on PPC_PMAC && POWER4
- select MPIC
- select U3_DART
- select MPIC_BROKEN_U3
- select GENERIC_TBSYNC
- select PPC_970_NAP
- default y
-
-config PPC_PREP
- bool "PowerPC Reference Platform (PReP) based machines"
- depends on PPC_MULTIPLATFORM && PPC32 && BROKEN
- select MPIC
- select PPC_I8259
- select PPC_INDIRECT_PCI
- select PPC_UDBG_16550
- select PPC_NATIVE
- default n
-
-config PPC_MAPLE
- depends on PPC_MULTIPLATFORM && PPC64
- bool "Maple 970FX Evaluation Board"
- select MPIC
- select U3_DART
- select MPIC_BROKEN_U3
- select GENERIC_TBSYNC
- select PPC_UDBG_16550
- select PPC_970_NAP
- select PPC_NATIVE
- select PPC_RTAS
- select MMIO_NVRAM
- select ATA_NONSTANDARD if ATA
- default n
- help
- This option enables support for the Maple 970FX Evaluation Board.
- For more information, refer to <http://www.970eval.com>
-
-config PPC_PASEMI
- depends on PPC_MULTIPLATFORM && PPC64
- bool "PA Semi SoC-based platforms"
- default n
- select MPIC
- select PPC_UDBG_16550
- select GENERIC_TBSYNC
- select PPC_NATIVE
- help
- This option enables support for PA Semi's PWRficient line
- of SoC processors, including PA6T-1682M
-
-config PPC_CELL
- bool
- default n
-
-config PPC_CELL_NATIVE
- bool
- select PPC_CELL
- select PPC_DCR_MMIO
- select PPC_OF_PLATFORM_PCI
- select PPC_INDIRECT_IO
- select PPC_NATIVE
- select MPIC
- default n
-
-config PPC_IBM_CELL_BLADE
- bool "IBM Cell Blade"
- depends on PPC_MULTIPLATFORM && PPC64
- select PPC_CELL_NATIVE
- select PPC_RTAS
- select MMIO_NVRAM
- select PPC_UDBG_16550
- select UDBG_RTAS_CONSOLE
-
-config PPC_PS3
- bool "Sony PS3 (incomplete)"
- depends on PPC_MULTIPLATFORM && PPC64
- select PPC_CELL
- select USB_ARCH_HAS_OHCI
- select USB_OHCI_LITTLE_ENDIAN
- select USB_OHCI_BIG_ENDIAN_MMIO
- select USB_ARCH_HAS_EHCI
- select USB_EHCI_BIG_ENDIAN_MMIO
- help
- This option enables support for the Sony PS3 game console
- and other platforms using the PS3 hypervisor.
- Support for this platform is not yet complete, so
- enabling this will not result in a bootable kernel on a
- PS3 system.
-
-config PPC_CELLEB
- bool "Toshiba's Cell Reference Set 'Celleb' Architecture"
- depends on PPC_MULTIPLATFORM && PPC64
- select PPC_CELL
- select PPC_OF_PLATFORM_PCI
- select HAS_TXX9_SERIAL
- select PPC_UDBG_BEAT
- select USB_OHCI_BIG_ENDIAN_MMIO
- select USB_EHCI_BIG_ENDIAN_MMIO
-
-config PPC_NATIVE
- bool
- depends on PPC_MULTIPLATFORM
- help
- Support for running natively on the hardware, i.e. without
- a hypervisor. This option is not user-selectable but should
- be selected by all platforms that need it.
-
-config UDBG_RTAS_CONSOLE
- bool "RTAS based debug console"
- depends on PPC_RTAS
- default n
-
-config PPC_UDBG_BEAT
- bool "BEAT based debug console"
- depends on PPC_CELLEB
- default n
-
-config XICS
- depends on PPC_PSERIES
- bool
- default y
-
-config U3_DART
- bool
- depends on PPC_MULTIPLATFORM && PPC64
- default n
-
-config PPC_RTAS
- bool
- default n
-
-config RTAS_ERROR_LOGGING
- bool
- depends on PPC_RTAS
- default n
-
-config RTAS_PROC
- bool "Proc interface to RTAS"
- depends on PPC_RTAS
- default y
-
-config RTAS_FLASH
- tristate "Firmware flash interface"
- depends on PPC64 && RTAS_PROC
-
-config PPC_PMI
- tristate "Support for PMI"
- depends PPC_IBM_CELL_BLADE
- help
- PMI (Platform Management Interrupt) is a way to
- communicate with the BMC (Baseboard Mangement Controller).
- It is used in some IBM Cell blades.
- default m
-
-config MMIO_NVRAM
- bool
- default n
-
-config MPIC_BROKEN_U3
- bool
- depends on PPC_MAPLE
- default y
-
-config IBMVIO
- depends on PPC_PSERIES || PPC_ISERIES
- bool
- default y
-
-config IBMEBUS
- depends on PPC_PSERIES
- bool "Support for GX bus based adapters"
- help
- Bus device driver for GX bus based adapters.
-
-config PPC_MPC106
- bool
- default n
-
-config PPC_970_NAP
- bool
- default n
-
-config PPC_INDIRECT_IO
- bool
- select GENERIC_IOMAP
- default n
-
-config GENERIC_IOMAP
- bool
- default n
-
-source "drivers/cpufreq/Kconfig"
-
-config CPU_FREQ_PMAC
- bool "Support for Apple PowerBooks"
- depends on CPU_FREQ && ADB_PMU && PPC32
- select CPU_FREQ_TABLE
- help
- This adds support for frequency switching on Apple PowerBooks,
- this currently includes some models of iBook & Titanium
- PowerBook.
-
-config CPU_FREQ_PMAC64
- bool "Support for some Apple G5s"
- depends on CPU_FREQ && PPC64
- select CPU_FREQ_TABLE
- help
- This adds support for frequency switching on Apple iMac G5,
- and some of the more recent desktop G5 machines as well.
-
-config PPC601_SYNC_FIX
- bool "Workarounds for PPC601 bugs"
- depends on 6xx && (PPC_PREP || PPC_PMAC)
- help
- Some versions of the PPC601 (the first PowerPC chip) have bugs which
- mean that extra synchronization instructions are required near
- certain instructions, typically those that make major changes to the
- CPU state. These extra instructions reduce performance slightly.
- If you say N here, these extra instructions will not be included,
- resulting in a kernel which will run faster but may not run at all
- on some systems with the PPC601 chip.
-
- If in doubt, say Y here.
-
-config TAU
- bool "On-chip CPU temperature sensor support"
- depends on 6xx
- help
- G3 and G4 processors have an on-chip temperature sensor called the
- 'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
- temperature within 2-4 degrees Celsius. This option shows the current
- on-die temperature in /proc/cpuinfo if the cpu supports it.
-
- Unfortunately, on some chip revisions, this sensor is very inaccurate
- and in many cases, does not work at all, so don't assume the cpu
- temp is actually what /proc/cpuinfo says it is.
-
-config TAU_INT
- bool "Interrupt driven TAU driver (DANGEROUS)"
- depends on TAU
- ---help---
- The TAU supports an interrupt driven mode which causes an interrupt
- whenever the temperature goes out of range. This is the fastest way
- to get notified the temp has exceeded a range. With this option off,
- a timer is used to re-check the temperature periodically.
-
- However, on some cpus it appears that the TAU interrupt hardware
- is buggy and can cause a situation which would lead unexplained hard
- lockups.
-
- Unless you are extending the TAU driver, or enjoy kernel/hardware
- debugging, leave this option off.
-
-config TAU_AVERAGE
- bool "Average high and low temp"
- depends on TAU
- ---help---
- The TAU hardware can compare the temperature to an upper and lower
- bound. The default behavior is to show both the upper and lower
- bound in /proc/cpuinfo. If the range is large, the temperature is
- either changing a lot, or the TAU hardware is broken (likely on some
- G4's). If the range is small (around 4 degrees), the temperature is
- relatively stable. If you say Y here, a single temperature value,
- halfway between the upper and lower bounds, will be reported in
- /proc/cpuinfo.
-
- If in doubt, say N here.
-
-endmenu
+source "arch/powerpc/platforms/Kconfig"
source arch/powerpc/platforms/embedded6xx/Kconfig
source arch/powerpc/platforms/4xx/Kconfig
@@ -757,9 +381,6 @@
source arch/powerpc/platforms/85xx/Kconfig
source arch/powerpc/platforms/86xx/Kconfig
source arch/powerpc/platforms/8xx/Kconfig
-source arch/powerpc/platforms/cell/Kconfig
-source arch/powerpc/platforms/ps3/Kconfig
-source arch/powerpc/platforms/pasemi/Kconfig
menu "Kernel options"
@@ -864,7 +485,6 @@
CPU. Generally saying Y is safe, although some problems have been
reported with SMP Power Macintoshes with this option enabled.
-source "arch/powerpc/platforms/pseries/Kconfig"
config NUMA
bool "NUMA support"
@@ -936,8 +556,6 @@
an image of the device tree that the kernel copies from Open
Firmware or other boot firmware. If unsure, say Y here.
-source "arch/powerpc/platforms/prep/Kconfig"
-
config CMDLINE_BOOL
bool "Default bootloader kernel arguments"
@@ -1234,7 +852,6 @@
source "arch/powerpc/sysdev/qe_lib/Kconfig"
-source "arch/powerpc/platforms/iseries/Kconfig"
source "lib/Kconfig"
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index d39d133..50f48f0 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -132,8 +132,7 @@
config SERIAL_TEXT_DEBUG
bool "Support for early boot texts over serial port"
- depends on 4xx || LOPEC || MV64X60 || PPLUS || PRPMC800 || \
- PPC_GEN550 || PPC_MPC52xx
+ depends on 4xx
config PPC_EARLY_DEBUG
bool "Early debugging (dangerous)"
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
new file mode 100644
index 0000000..bc4aa4a
--- /dev/null
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -0,0 +1,35 @@
+config PPC_MPC52xx
+ bool
+ default n
+
+config PPC_MPC5200
+ bool
+ select PPC_MPC52xx
+ default n
+
+config PPC_MPC5200_BUGFIX
+ bool "MPC5200 (L25R) bugfix support"
+ depends on PPC_MPC5200
+ default n
+ help
+ Enable workarounds for original MPC5200 errata. This is not required
+ for MPC5200B based boards.
+
+ It is safe to say 'Y' here
+
+config PPC_EFIKA
+ bool "bPlan Efika 5k2. MPC5200B based computer"
+ depends on PPC_MULTIPLATFORM && PPC32
+ select PPC_RTAS
+ select RTAS_PROC
+ select PPC_MPC52xx
+ select PPC_NATIVE
+ default n
+
+config PPC_LITE5200
+ bool "Freescale Lite5200 Eval Board"
+ depends on PPC_MULTIPLATFORM && PPC32
+ select PPC_MPC5200
+ default n
+
+
diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig
index 47d841e..4110716 100644
--- a/arch/powerpc/platforms/82xx/Kconfig
+++ b/arch/powerpc/platforms/82xx/Kconfig
@@ -18,4 +18,39 @@
endchoice
+config PQ2ADS
+ bool
+ depends on ADS8272
+ default y
+
+config ADS8272
+ bool
+
+config 8260
+ bool "CPM2 Support" if WILLOW
+ depends on 6xx
+ default y if PQ2FADS
+ help
+ The MPC8260 is a typical embedded CPU made by Motorola. Selecting
+ this option means that you wish to build a kernel for a machine with
+ an 8260 class CPU.
+
+config 8272
+ bool
+ depends on 6xx
+ default y if ADS8272
+ select 8260
+ help
+ The MPC8272 CPM has a different internal dpram setup than other CPM2
+ devices
+
+config CPM2
+ bool
+ depends on 8260 || MPC8560 || MPC8555
+ default y
+ help
+ The CPM2 (Communications Processor Module) is a coprocessor on
+ embedded CPUs made by Motorola. Selecting this option means that
+ you wish to build a kernel for a machine with a CPM2 coprocessor
+ on it (826x, 827x, 8560).
endmenu
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
new file mode 100644
index 0000000..388a1bd
--- /dev/null
+++ b/arch/powerpc/platforms/Kconfig
@@ -0,0 +1,219 @@
+menu "Platform support"
+ depends on PPC64 || CLASSIC32
+
+choice
+ prompt "Machine type"
+ default PPC_MULTIPLATFORM
+
+config PPC_MULTIPLATFORM
+ bool "Generic desktop/server/laptop"
+ help
+ Select this option if configuring for an IBM pSeries or
+ RS/6000 machine, an Apple machine, or a PReP, CHRP,
+ Maple or Cell-based machine.
+
+config EMBEDDED6xx
+ bool "Embedded 6xx/7xx/7xxx-based board"
+ depends on PPC32 && (BROKEN||BROKEN_ON_SMP)
+
+config APUS
+ bool "Amiga-APUS"
+ depends on PPC32 && BROKEN
+ help
+ Select APUS if configuring for a PowerUP Amiga.
+ More information is available at:
+ <http://linux-apus.sourceforge.net/>.
+endchoice
+
+config QUICC_ENGINE
+ bool
+ depends on PPC_MPC836x || PPC_MPC832x
+ default y
+ help
+ The QUICC Engine (QE) is a new generation of communications
+ coprocessors on Freescale embedded CPUs (akin to CPM in older chips).
+ Selecting this option means that you wish to build a kernel
+ for a machine with a QE coprocessor.
+
+source "arch/powerpc/platforms/pseries/Kconfig"
+source "arch/powerpc/platforms/iseries/Kconfig"
+source "arch/powerpc/platforms/chrp/Kconfig"
+source "arch/powerpc/platforms/52xx/Kconfig"
+source "arch/powerpc/platforms/powermac/Kconfig"
+source "arch/powerpc/platforms/prep/Kconfig"
+source "arch/powerpc/platforms/maple/Kconfig"
+source "arch/powerpc/platforms/pasemi/Kconfig"
+source arch/powerpc/platforms/celleb/Kconfig
+source arch/powerpc/platforms/ps3/Kconfig
+source arch/powerpc/platforms/cell/Kconfig
+
+config PPC_NATIVE
+ bool
+ depends on PPC_MULTIPLATFORM
+ help
+ Support for running natively on the hardware, i.e. without
+ a hypervisor. This option is not user-selectable but should
+ be selected by all platforms that need it.
+
+config UDBG_RTAS_CONSOLE
+ bool "RTAS based debug console"
+ depends on PPC_RTAS
+ default n
+
+config PPC_UDBG_BEAT
+ bool "BEAT based debug console"
+ depends on PPC_CELLEB
+ default n
+
+config XICS
+ depends on PPC_PSERIES
+ bool
+ default y
+
+config U3_DART
+ bool
+ depends on PPC_MULTIPLATFORM && PPC64
+ default n
+
+config PPC_RTAS
+ bool
+ default n
+
+config RTAS_ERROR_LOGGING
+ bool
+ depends on PPC_RTAS
+ default n
+
+config RTAS_PROC
+ bool "Proc interface to RTAS"
+ depends on PPC_RTAS
+ default y
+
+config RTAS_FLASH
+ tristate "Firmware flash interface"
+ depends on PPC64 && RTAS_PROC
+
+config PPC_PMI
+ tristate "Support for PMI"
+ depends PPC_IBM_CELL_BLADE
+ help
+ PMI (Platform Management Interrupt) is a way to
+ communicate with the BMC (Baseboard Mangement Controller).
+ It is used in some IBM Cell blades.
+ default m
+
+config MMIO_NVRAM
+ bool
+ default n
+
+config MPIC_BROKEN_U3
+ bool
+ depends on PPC_MAPLE
+ default y
+
+config IBMVIO
+ depends on PPC_PSERIES || PPC_ISERIES
+ bool
+ default y
+
+config IBMEBUS
+ depends on PPC_PSERIES
+ bool "Support for GX bus based adapters"
+ help
+ Bus device driver for GX bus based adapters.
+
+config PPC_MPC106
+ bool
+ default n
+
+config PPC_970_NAP
+ bool
+ default n
+
+config PPC_INDIRECT_IO
+ bool
+ select GENERIC_IOMAP
+ default n
+
+config GENERIC_IOMAP
+ bool
+ default n
+
+source "drivers/cpufreq/Kconfig"
+
+config CPU_FREQ_PMAC
+ bool "Support for Apple PowerBooks"
+ depends on CPU_FREQ && ADB_PMU && PPC32
+ select CPU_FREQ_TABLE
+ help
+ This adds support for frequency switching on Apple PowerBooks,
+ this currently includes some models of iBook & Titanium
+ PowerBook.
+
+config CPU_FREQ_PMAC64
+ bool "Support for some Apple G5s"
+ depends on CPU_FREQ && PPC64
+ select CPU_FREQ_TABLE
+ help
+ This adds support for frequency switching on Apple iMac G5,
+ and some of the more recent desktop G5 machines as well.
+
+config PPC601_SYNC_FIX
+ bool "Workarounds for PPC601 bugs"
+ depends on 6xx && (PPC_PREP || PPC_PMAC)
+ help
+ Some versions of the PPC601 (the first PowerPC chip) have bugs which
+ mean that extra synchronization instructions are required near
+ certain instructions, typically those that make major changes to the
+ CPU state. These extra instructions reduce performance slightly.
+ If you say N here, these extra instructions will not be included,
+ resulting in a kernel which will run faster but may not run at all
+ on some systems with the PPC601 chip.
+
+ If in doubt, say Y here.
+
+config TAU
+ bool "On-chip CPU temperature sensor support"
+ depends on 6xx
+ help
+ G3 and G4 processors have an on-chip temperature sensor called the
+ 'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
+ temperature within 2-4 degrees Celsius. This option shows the current
+ on-die temperature in /proc/cpuinfo if the cpu supports it.
+
+ Unfortunately, on some chip revisions, this sensor is very inaccurate
+ and in many cases, does not work at all, so don't assume the cpu
+ temp is actually what /proc/cpuinfo says it is.
+
+config TAU_INT
+ bool "Interrupt driven TAU driver (DANGEROUS)"
+ depends on TAU
+ ---help---
+ The TAU supports an interrupt driven mode which causes an interrupt
+ whenever the temperature goes out of range. This is the fastest way
+ to get notified the temp has exceeded a range. With this option off,
+ a timer is used to re-check the temperature periodically.
+
+ However, on some cpus it appears that the TAU interrupt hardware
+ is buggy and can cause a situation which would lead unexplained hard
+ lockups.
+
+ Unless you are extending the TAU driver, or enjoy kernel/hardware
+ debugging, leave this option off.
+
+config TAU_AVERAGE
+ bool "Average high and low temp"
+ depends on TAU
+ ---help---
+ The TAU hardware can compare the temperature to an upper and lower
+ bound. The default behavior is to show both the upper and lower
+ bound in /proc/cpuinfo. If the range is large, the temperature is
+ either changing a lot, or the TAU hardware is broken (likely on some
+ G4's). If the range is small (around 4 degrees), the temperature is
+ relatively stable. If you say Y here, a single temperature value,
+ halfway between the upper and lower bounds, will be reported in
+ /proc/cpuinfo.
+
+ If in doubt, say N here.
+
+endmenu
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index 06a85b7..53913a2 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -1,3 +1,26 @@
+config PPC_CELL
+ bool
+ default n
+
+config PPC_CELL_NATIVE
+ bool
+ select PPC_CELL
+ select PPC_DCR_MMIO
+ select PPC_OF_PLATFORM_PCI
+ select PPC_INDIRECT_IO
+ select PPC_NATIVE
+ select MPIC
+ default n
+
+config PPC_IBM_CELL_BLADE
+ bool "IBM Cell Blade"
+ depends on PPC_MULTIPLATFORM && PPC64
+ select PPC_CELL_NATIVE
+ select PPC_RTAS
+ select MMIO_NVRAM
+ select PPC_UDBG_16550
+ select UDBG_RTAS_CONSOLE
+
menu "Cell Broadband Engine options"
depends on PPC_CELL
diff --git a/arch/powerpc/platforms/celleb/Kconfig b/arch/powerpc/platforms/celleb/Kconfig
new file mode 100644
index 0000000..2db1e29
--- /dev/null
+++ b/arch/powerpc/platforms/celleb/Kconfig
@@ -0,0 +1,9 @@
+config PPC_CELLEB
+ bool "Toshiba's Cell Reference Set 'Celleb' Architecture"
+ depends on PPC_MULTIPLATFORM && PPC64
+ select PPC_CELL
+ select PPC_OF_PLATFORM_PCI
+ select HAS_TXX9_SERIAL
+ select PPC_UDBG_BEAT
+ select USB_OHCI_BIG_ENDIAN_MMIO
+ select USB_EHCI_BIG_ENDIAN_MMIO
diff --git a/arch/powerpc/platforms/chrp/Kconfig b/arch/powerpc/platforms/chrp/Kconfig
new file mode 100644
index 0000000..d2c6905
--- /dev/null
+++ b/arch/powerpc/platforms/chrp/Kconfig
@@ -0,0 +1,11 @@
+config PPC_CHRP
+ bool "Common Hardware Reference Platform (CHRP) based machines"
+ depends on PPC_MULTIPLATFORM && PPC32
+ select MPIC
+ select PPC_I8259
+ select PPC_INDIRECT_PCI
+ select PPC_RTAS
+ select PPC_MPC106
+ select PPC_UDBG_16550
+ select PPC_NATIVE
+ default y
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 3410bcb..9557908 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -2,78 +2,6 @@
prompt "Machine Type"
depends on EMBEDDED6xx
-config KATANA
- bool "Artesyn-Katana"
- help
- Select KATANA if configuring an Artesyn KATANA 750i or 3750
- cPCI board.
-
-config WILLOW
- bool "Cogent-Willow"
-
-config CPCI690
- bool "Force-CPCI690"
- help
- Select CPCI690 if configuring a Force CPCI690 cPCI board.
-
-config POWERPMC250
- bool "Force-PowerPMC250"
-
-config CHESTNUT
- bool "IBM 750FX Eval board or 750GX Eval board"
- help
- Select CHESTNUT if configuring an IBM 750FX Eval Board or a
- IBM 750GX Eval board.
-
-config SPRUCE
- bool "IBM-Spruce"
- select PPC_INDIRECT_PCI
-
-config HDPU
- bool "Sky-HDPU"
- help
- Select HDPU if configuring a Sky Computers Compute Blade.
-
-config HDPU_FEATURES
- depends on HDPU
- tristate "HDPU-Features"
- help
- Select to enable HDPU enhanced features.
-
-config EV64260
- bool "Marvell-EV64260BP"
- help
- Select EV64260 if configuring a Marvell (formerly Galileo)
- EV64260BP Evaluation platform.
-
-config LOPEC
- bool "Motorola-LoPEC"
- select PPC_I8259
-
-config MVME5100
- bool "Motorola-MVME5100"
- select PPC_INDIRECT_PCI
-
-config PPLUS
- bool "Motorola-PowerPlus"
- select PPC_I8259
- select PPC_INDIRECT_PCI
-
-config PRPMC750
- bool "Motorola-PrPMC750"
- select PPC_INDIRECT_PCI
-
-config PRPMC800
- bool "Motorola-PrPMC800"
- select PPC_INDIRECT_PCI
-
-config SANDPOINT
- bool "Motorola-Sandpoint"
- select PPC_I8259
- help
- Select SANDPOINT if configuring for a Motorola Sandpoint X3
- (any flavor).
-
config LINKSTATION
bool "Linkstation / Kurobox(HG) from Buffalo"
select MPIC
@@ -97,212 +25,24 @@
help
Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga)
platform
-
-config RADSTONE_PPC7D
- bool "Radstone Technology PPC7D board"
- select PPC_I8259
-
-config PAL4
- bool "SBS-Palomar4"
-
-config EST8260
- bool "EST8260"
- ---help---
- The EST8260 is a single-board computer manufactured by Wind River
- Systems, Inc. (formerly Embedded Support Tools Corp.) and based on
- the MPC8260. Wind River Systems has a website at
- <http://www.windriver.com/>, but the EST8260 cannot be found on it
- and has probably been discontinued or rebadged.
-
-config SBC82xx
- bool "SBC82xx"
- ---help---
- SBC PowerQUICC II, single-board computer with MPC82xx CPU
- Manufacturer: Wind River Systems, Inc.
- Date of Release: May 2003
- End of Life: -
- URL: <http://www.windriver.com/>
-
-config SBS8260
- bool "SBS8260"
-
-config RPX8260
- bool "RPXSUPER"
-
-config TQM8260
- bool "TQM8260"
- ---help---
- MPC8260 based module, little larger than credit card,
- up to 128 MB global + 64 MB local RAM, 32 MB Flash,
- 32 kB EEPROM, 256 kB L@ Cache, 10baseT + 100baseT Ethernet,
- 2 x serial ports, ...
- Manufacturer: TQ Components, www.tq-group.de
- Date of Release: June 2001
- End of Life: not yet :-)
- URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf>
-
-config ADS8272
- bool "ADS8272"
-
-config PQ2FADS
- bool "Freescale-PQ2FADS"
- help
- Select PQ2FADS if you wish to configure for a Freescale
- PQ2FADS board (-VR or -ZU).
-
-config EV64360
- bool "Marvell-EV64360BP"
- help
- Select EV64360 if configuring a Marvell EV64360BP Evaluation
- platform.
endchoice
-config PQ2ADS
- bool
- depends on ADS8272
- default y
-
-config TQM8xxL
- bool
- depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L)
- default y
-
-config 8260
- bool "CPM2 Support" if WILLOW
- depends on 6xx
- default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx || PQ2FADS
- help
- The MPC8260 is a typical embedded CPU made by Motorola. Selecting
- this option means that you wish to build a kernel for a machine with
- an 8260 class CPU.
-
-config 8272
- bool
- depends on 6xx
- default y if ADS8272
- select 8260
- help
- The MPC8272 CPM has a different internal dpram setup than other CPM2
- devices
-
-config CPM2
- bool
- depends on 8260 || MPC8560 || MPC8555
- default y
- help
- The CPM2 (Communications Processor Module) is a coprocessor on
- embedded CPUs made by Motorola. Selecting this option means that
- you wish to build a kernel for a machine with a CPM2 coprocessor
- on it (826x, 827x, 8560).
-
-config PPC_GEN550
- bool
- depends on SANDPOINT || SPRUCE || PPLUS || \
- PRPMC750 || PRPMC800 || LOPEC || \
- (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \
- 83xx || LINKSTATION
- default y
-
-config FORCE
- bool
- depends on 6xx && POWERPMC250
- default y
-
-config GT64260
- bool
- depends on EV64260 || CPCI690
- default y
-
-config MV64360 # Really MV64360 & MV64460
- bool
- depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU || EV64360
- default y
-
-config MV64X60
- bool
- depends on (GT64260 || MV64360)
- select PPC_INDIRECT_PCI
- default y
-
config TSI108_BRIDGE
bool
depends on MPC7448HPC2
default y
-menu "Set bridge options"
- depends on MV64X60
-
-config NOT_COHERENT_CACHE
- bool "Turn off Cache Coherency"
- default n
- help
- Some 64x60 bridges lock up when trying to enforce cache coherency.
- When this option is selected, cache coherency will be turned off.
- Note that this can cause other problems (e.g., stale data being
- speculatively loaded via a cached mapping). Use at your own risk.
-
-config MV64X60_BASE
- hex "Set bridge base used by firmware"
- default "0xf1000000"
- help
- A firmware can leave the base address of the bridge's registers at
- a non-standard location. If so, set this value to reflect the
- address of that non-standard location.
-
-config MV64X60_NEW_BASE
- hex "Set bridge base used by kernel"
- default "0xf1000000"
- help
- If the current base address of the bridge's registers is not where
- you want it, set this value to the address that you want it moved to.
-
-endmenu
-
-config NONMONARCH_SUPPORT
- bool "Enable Non-Monarch Support"
- depends on PRPMC800
-
-config HARRIER
- bool
- depends on PRPMC800
- default y
-
-config EPIC_SERIAL_MODE
- bool
- depends on 6xx && (LOPEC || SANDPOINT)
- default y
-
config MPC10X_BRIDGE
bool
- depends on POWERPMC250 || LOPEC || SANDPOINT || LINKSTATION
+ depends on LINKSTATION
select PPC_INDIRECT_PCI
default y
config MPC10X_OPENPIC
bool
- depends on POWERPMC250 || LOPEC || SANDPOINT || LINKSTATION
+ depends on LINKSTATION
default y
config MPC10X_STORE_GATHERING
bool "Enable MPC10x store gathering"
depends on MPC10X_BRIDGE
-
-config SANDPOINT_ENABLE_UART1
- bool "Enable DUART mode on Sandpoint"
- depends on SANDPOINT
- help
- If this option is enabled then the MPC824x processor will run
- in DUART mode instead of UART mode.
-
-config HARRIER_STORE_GATHERING
- bool "Enable Harrier store gathering"
- depends on HARRIER
-
-config MVME5100_IPMC761_PRESENT
- bool "MVME5100 configured with an IPMC761"
- depends on MVME5100
- select PPC_I8259
-
-config SPRUCE_BAUD_33M
- bool "Spruce baud clock support"
- depends on SPRUCE
diff --git a/arch/powerpc/platforms/iseries/Kconfig b/arch/powerpc/platforms/iseries/Kconfig
index 54e6b3b..46c3a8e 100644
--- a/arch/powerpc/platforms/iseries/Kconfig
+++ b/arch/powerpc/platforms/iseries/Kconfig
@@ -1,3 +1,7 @@
+config PPC_ISERIES
+ bool "IBM Legacy iSeries"
+ depends on PPC_MULTIPLATFORM && PPC64
+ select PPC_INDIRECT_IO
menu "iSeries device drivers"
depends on PPC_ISERIES
diff --git a/arch/powerpc/platforms/maple/Kconfig b/arch/powerpc/platforms/maple/Kconfig
new file mode 100644
index 0000000..5f364b8
--- /dev/null
+++ b/arch/powerpc/platforms/maple/Kconfig
@@ -0,0 +1,17 @@
+config PPC_MAPLE
+ depends on PPC_MULTIPLATFORM && PPC64
+ bool "Maple 970FX Evaluation Board"
+ select MPIC
+ select U3_DART
+ select MPIC_BROKEN_U3
+ select GENERIC_TBSYNC
+ select PPC_UDBG_16550
+ select PPC_970_NAP
+ select PPC_NATIVE
+ select PPC_RTAS
+ select MMIO_NVRAM
+ select ATA_NONSTANDARD if ATA
+ default n
+ help
+ This option enables support for the Maple 970FX Evaluation Board.
+ For more information, refer to <http://www.970eval.com>
diff --git a/arch/powerpc/platforms/pasemi/Kconfig b/arch/powerpc/platforms/pasemi/Kconfig
index 68dc529..64e5525 100644
--- a/arch/powerpc/platforms/pasemi/Kconfig
+++ b/arch/powerpc/platforms/pasemi/Kconfig
@@ -1,3 +1,15 @@
+config PPC_PASEMI
+ depends on PPC_MULTIPLATFORM && PPC64
+ bool "PA Semi SoC-based platforms"
+ default n
+ select MPIC
+ select PPC_UDBG_16550
+ select GENERIC_TBSYNC
+ select PPC_NATIVE
+ help
+ This option enables support for PA Semi's PWRficient line
+ of SoC processors, including PA6T-1682M
+
menu "PA Semi PWRficient options"
depends on PPC_PASEMI
diff --git a/arch/powerpc/platforms/powermac/Kconfig b/arch/powerpc/platforms/powermac/Kconfig
new file mode 100644
index 0000000..02d9c7d
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/Kconfig
@@ -0,0 +1,20 @@
+config PPC_PMAC
+ bool "Apple PowerMac based machines"
+ depends on PPC_MULTIPLATFORM
+ select MPIC
+ select PPC_INDIRECT_PCI if PPC32
+ select PPC_MPC106 if PPC32
+ select PPC_NATIVE
+ default y
+
+config PPC_PMAC64
+ bool
+ depends on PPC_PMAC && POWER4
+ select MPIC
+ select U3_DART
+ select MPIC_BROKEN_U3
+ select GENERIC_TBSYNC
+ select PPC_970_NAP
+ default y
+
+
diff --git a/arch/powerpc/platforms/prep/Kconfig b/arch/powerpc/platforms/prep/Kconfig
index 673ac47..29d4112 100644
--- a/arch/powerpc/platforms/prep/Kconfig
+++ b/arch/powerpc/platforms/prep/Kconfig
@@ -1,3 +1,12 @@
+config PPC_PREP
+ bool "PowerPC Reference Platform (PReP) based machines"
+ depends on PPC_MULTIPLATFORM && PPC32 && BROKEN
+ select MPIC
+ select PPC_I8259
+ select PPC_INDIRECT_PCI
+ select PPC_UDBG_16550
+ select PPC_NATIVE
+ default n
config PREP_RESIDUAL
bool "Support for PReP Residual Data"
diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig
index 1a481a6..40f0008 100644
--- a/arch/powerpc/platforms/ps3/Kconfig
+++ b/arch/powerpc/platforms/ps3/Kconfig
@@ -1,3 +1,19 @@
+config PPC_PS3
+ bool "Sony PS3 (incomplete)"
+ depends on PPC_MULTIPLATFORM && PPC64
+ select PPC_CELL
+ select USB_ARCH_HAS_OHCI
+ select USB_OHCI_LITTLE_ENDIAN
+ select USB_OHCI_BIG_ENDIAN_MMIO
+ select USB_ARCH_HAS_EHCI
+ select USB_EHCI_BIG_ENDIAN_MMIO
+ help
+ This option enables support for the Sony PS3 game console
+ and other platforms using the PS3 hypervisor.
+ Support for this platform is not yet complete, so
+ enabling this will not result in a bootable kernel on a
+ PS3 system.
+
menu "PS3 Platform Options"
depends on PPC_PS3
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index a57032c..16e4e40 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -1,3 +1,13 @@
+config PPC_PSERIES
+ depends on PPC_MULTIPLATFORM && PPC64
+ bool "IBM pSeries & new (POWER5-based) iSeries"
+ select MPIC
+ select PPC_I8259
+ select PPC_RTAS
+ select RTAS_ERROR_LOGGING
+ select PPC_UDBG_16550
+ select PPC_NATIVE
+ default y
config PPC_SPLPAR
depends on PPC_PSERIES