ide: always use ->OUTBSYNC method for executing commands
Always use ->OUTBSYNC method for executing commands so the posting is done
if needed (this affects only pmac and scc_pata host drivers at the moment).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index e2bcd3a..b9983c4 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -696,7 +696,8 @@
return ide_started;
} else {
/* Issue the packet command */
- hwif->OUTB(WIN_PACKETCMD, hwif->io_ports.command_addr);
+ hwif->OUTBSYNC(drive, WIN_PACKETCMD,
+ hwif->io_ports.command_addr);
return (*pkt_xfer_routine) (drive);
}
}
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index a17fc64..c32ca76 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -502,7 +502,8 @@
if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT))
/* force an abort */
- hwif->OUTB(WIN_IDLEIMMEDIATE, hwif->io_ports.command_addr);
+ hwif->OUTBSYNC(drive, WIN_IDLEIMMEDIATE,
+ hwif->io_ports.command_addr);
if (rq->errors >= ERROR_MAX) {
ide_kill_rq(drive, rq);
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 1789fba..7f2b4ed 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -593,7 +593,7 @@
SELECT_MASK(drive, 1);
ide_set_irq(drive, 1);
msleep(50);
- hwif->OUTB(WIN_IDENTIFY, hwif->io_ports.command_addr);
+ hwif->OUTBSYNC(drive, WIN_IDENTIFY, hwif->io_ports.command_addr);
timeout = jiffies + WAIT_WORSTCASE;
do {
if (time_after(jiffies, timeout)) {
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 8f7d576..099a0fe 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -293,7 +293,7 @@
hwif->OUTB(0, io_ports->feature_addr);
/* ask drive for ID */
- hwif->OUTB(cmd, io_ports->command_addr);
+ hwif->OUTBSYNC(drive, cmd, io_ports->command_addr);
timeout = ((cmd == WIN_IDENTIFY) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2;
timeout += jiffies;
@@ -480,7 +480,7 @@
msleep(50);
hwif->OUTB(drive->select.all, io_ports->device_addr);
msleep(50);
- hwif->OUTB(WIN_SRST, io_ports->command_addr);
+ hwif->OUTBSYNC(drive, WIN_SRST, io_ports->command_addr);
(void)ide_busy_sleep(hwif);
rc = try_to_identify(drive, cmd);
}
@@ -516,7 +516,7 @@
printk("%s: enabling %s -- ", hwif->name, drive->id->model);
SELECT_DRIVE(drive);
msleep(50);
- hwif->OUTB(EXABYTE_ENABLE_NEST, hwif->io_ports.command_addr);
+ hwif->OUTBSYNC(drive, EXABYTE_ENABLE_NEST, hwif->io_ports.command_addr);
if (ide_busy_sleep(hwif)) {
printk(KERN_CONT "failed (timeout)\n");
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index f4f3123..f3f231d 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -1056,7 +1056,8 @@
IDETAPE_WAIT_CMD, NULL);
return ide_started;
} else {
- hwif->OUTB(WIN_PACKETCMD, hwif->io_ports.command_addr);
+ hwif->OUTBSYNC(drive, WIN_PACKETCMD,
+ hwif->io_ports.command_addr);
return idetape_transfer_pc(drive);
}
}
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index 1168fb0..8f716da 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -256,7 +256,8 @@
if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT))
/* force an abort */
- hwif->OUTB(WIN_IDLEIMMEDIATE, hwif->io_ports.command_addr);
+ hwif->OUTBSYNC(drive, WIN_IDLEIMMEDIATE,
+ hwif->io_ports.command_addr);
rq->errors++;
@@ -573,7 +574,8 @@
return ide_started;
} else {
/* Issue the packet command */
- hwif->OUTB(WIN_PACKETCMD, hwif->io_ports.command_addr);
+ hwif->OUTBSYNC(drive, WIN_PACKETCMD,
+ hwif->io_ports.command_addr);
return idescsi_transfer_pc(drive);
}
}