[POWERPC] Add briq support to CHRP
The support for Briq machines has been floating around as patches for
ages. This cleans it up and adds it once for all.
Some of this is based on initial code provided by Karsten Jeppesen
<karsten@jeppesens.com> and mostly rewritten from scratch by me.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 462bced..90972ef 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -2033,16 +2033,22 @@
#endif
#ifdef CONFIG_PPC_CHRP
-/* Pegasos lacks the "ranges" property in the isa node */
+/* Pegasos and BriQ lacks the "ranges" property in the isa node */
static void __init fixup_device_tree_chrp(void)
{
phandle isa;
u32 isa_ranges[6];
+ u32 rloc = 0x01006000; /* IO space; PCI device = 12 */
char *name;
int rc;
name = "/pci@80000000/isa@c";
isa = call_prom("finddevice", 1, 1, ADDR(name));
+ if (!PHANDLE_VALID(isa)) {
+ name = "/pci@ff500000/isa@6";
+ isa = call_prom("finddevice", 1, 1, ADDR(name));
+ rloc = 0x01003000; /* IO space; PCI device = 6 */
+ }
if (!PHANDLE_VALID(isa))
return;
@@ -2054,7 +2060,7 @@
isa_ranges[0] = 0x1;
isa_ranges[1] = 0x0;
- isa_ranges[2] = 0x01006000;
+ isa_ranges[2] = rloc;
isa_ranges[3] = 0x0;
isa_ranges[4] = 0x0;
isa_ranges[5] = 0x00010000;
diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c
index 6802cdc3..6d7ac64 100644
--- a/arch/powerpc/platforms/chrp/pci.c
+++ b/arch/powerpc/platforms/chrp/pci.c
@@ -257,7 +257,7 @@
else
printk(KERN_INFO "PCI buses %d..%d",
bus_range[0], bus_range[1]);
- printk(" controlled by %s", dev->type);
+ printk(" controlled by %s", dev->full_name);
if (!is_longtrail)
printk(" at %llx", (unsigned long long)r.start);
printk("\n");
@@ -289,6 +289,19 @@
setup_indirect_pci(hose, 0xfec00cf8, 0xfee00cfc);
} else if (is_pegasos == 2) {
setup_peg2(hose, dev);
+ } else if (!strncmp(model, "IBM,CPC710", 10)) {
+ setup_indirect_pci(hose,
+ r.start + 0x000f8000,
+ r.start + 0x000f8010);
+ if (index == 0) {
+ dma = get_property(dev, "system-dma-base",&len);
+ if (dma && len >= sizeof(*dma)) {
+ dma = (unsigned int *)
+ (((unsigned long)dma) +
+ len - sizeof(*dma));
+ pci_dram_offset = *dma;
+ }
+ }
} else {
printk("No methods for %s (model %s), using RTAS\n",
dev->full_name, model);
@@ -306,8 +319,29 @@
printk("pci_dram_offset = %lx\n", pci_dram_offset);
}
}
-
- /* Do not fixup interrupts from OF tree on pegasos */
- if (is_pegasos)
- ppc_md.pcibios_fixup = NULL;
}
+
+/* SL82C105 IDE Control/Status Register */
+#define SL82C105_IDECSR 0x40
+
+/* Fixup for Winbond ATA quirk, required for briq */
+void chrp_pci_fixup_winbond_ata(struct pci_dev *sl82c105)
+{
+ u8 progif;
+
+ /* If non-briq machines need that fixup too, please speak up */
+ if (!machine_is(chrp) || _chrp_type != _CHRP_briq)
+ return;
+
+ if ((sl82c105->class & 5) != 5) {
+ printk("W83C553: Switching SL82C105 IDE to PCI native mode\n");
+ /* Enable SL82C105 PCI native IDE mode */
+ pci_read_config_byte(sl82c105, PCI_CLASS_PROG, &progif);
+ pci_write_config_byte(sl82c105, PCI_CLASS_PROG, progif | 0x05);
+ sl82c105->class |= 0x05;
+ /* Disable SL82C105 second port */
+ pci_write_config_word(sl82c105, SL82C105_IDECSR, 0x0003);
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105,
+ chrp_pci_fixup_winbond_ata);
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 9c08ff3..be39742 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -74,6 +74,9 @@
extern unsigned long loops_per_jiffy;
+/* To be replaced by RTAS when available */
+static unsigned int *briq_SPOR;
+
#ifdef CONFIG_SMP
extern struct smp_ops_t chrp_smp_ops;
#endif
@@ -92,6 +95,15 @@
"Disabled", "Write-Through", "Copy-Back", "Transparent Mode"
};
+static const char *chrp_names[] = {
+ "Unknown",
+ "","","",
+ "Motorola",
+ "IBM or Longtrail",
+ "Genesi Pegasos",
+ "Total Impact Briq"
+};
+
void chrp_show_cpuinfo(struct seq_file *m)
{
int i, sdramen;
@@ -229,6 +241,14 @@
}
}
+static void briq_restart(char *cmd)
+{
+ local_irq_disable();
+ if (briq_SPOR)
+ out_be32(briq_SPOR, 0);
+ for(;;);
+}
+
void __init chrp_setup_arch(void)
{
struct device_node *root = find_path_device ("/");
@@ -245,11 +265,16 @@
_chrp_type = _CHRP_IBM;
} else if (machine && strncmp(machine, "MOT", 3) == 0) {
_chrp_type = _CHRP_Motorola;
+ } else if (machine && strncmp(machine, "TotalImpact,BRIQ-1", 18) == 0) {
+ _chrp_type = _CHRP_briq;
+ /* Map the SPOR register on briq and change the restart hook */
+ briq_SPOR = (unsigned int *)ioremap(0xff0000e8, 4);
+ ppc_md.restart = briq_restart;
} else {
/* Let's assume it is an IBM chrp if all else fails */
_chrp_type = _CHRP_IBM;
}
- printk("chrp type = %x\n", _chrp_type);
+ printk("chrp type = %x [%s]\n", _chrp_type, chrp_names[_chrp_type]);
rtas_initialize();
if (rtas_token("display-character") >= 0)
diff --git a/include/asm-powerpc/processor.h b/include/asm-powerpc/processor.h
index 22e54a2..6cb6fb1 100644
--- a/include/asm-powerpc/processor.h
+++ b/include/asm-powerpc/processor.h
@@ -32,6 +32,7 @@
#define _CHRP_Motorola 0x04 /* motorola chrp, the cobra */
#define _CHRP_IBM 0x05 /* IBM chrp, the longtrail and longtrail 2 */
#define _CHRP_Pegasos 0x06 /* Genesi/bplan's Pegasos and Pegasos2 */
+#define _CHRP_briq 0x07 /* TotalImpact's briQ */
#if defined(__KERNEL__) && defined(CONFIG_PPC32)