diff --git a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
new file mode 100644
index 0000000..d2fe064
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
@@ -0,0 +1,10 @@
+* OMAP OCP2SCP - ocp interface to scp interface
+
+properties:
+- compatible : Should be "ti,omap-ocp2scp"
+- #address-cells, #size-cells : Must be present if the device has sub-nodes
+- ranges : the child address space are mapped 1:1 onto the parent address space
+- ti,hwmods : must be "ocp2scp_usb_phy"
+
+Sub-nodes:
+All the devices connected to ocp2scp are described using sub-node to ocp2scp
diff --git a/drivers/Kconfig b/drivers/Kconfig
index ece958d..324e958 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -2,6 +2,8 @@
 
 source "drivers/base/Kconfig"
 
+source "drivers/bus/Kconfig"
+
 source "drivers/connector/Kconfig"
 
 source "drivers/mtd/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 5b42184..f8cdeeb 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -5,6 +5,8 @@
 # Rewritten to use lists instead of if-statements.
 #
 
+obj-y				+= bus/
+
 # GPIO must come after pinctrl as gpios may need to mux pins etc
 obj-y				+= pinctrl/
 obj-y				+= gpio/
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
new file mode 100644
index 0000000..6270415
--- /dev/null
+++ b/drivers/bus/Kconfig
@@ -0,0 +1,15 @@
+#
+# Bus Devices
+#
+
+menu "Bus devices"
+
+config OMAP_OCP2SCP
+	tristate "OMAP OCP2SCP DRIVER"
+	help
+	  Driver to enable ocp2scp module which transforms ocp interface
+	  protocol to scp protocol. In OMAP4, USB PHY is connected via
+	  OCP2SCP and in OMAP5, both USB PHY and SATA PHY is connected via
+	  OCP2SCP.
+
+endmenu
diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
new file mode 100644
index 0000000..0ec50bc
--- /dev/null
+++ b/drivers/bus/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the bus drivers.
+#
+
+obj-$(CONFIG_OMAP_OCP2SCP)	+= omap-ocp2scp.o
diff --git a/drivers/bus/omap-ocp2scp.c b/drivers/bus/omap-ocp2scp.c
new file mode 100644
index 0000000..9075ef8
--- /dev/null
+++ b/drivers/bus/omap-ocp2scp.c
@@ -0,0 +1,88 @@
+/*
+ * omap-ocp2scp.c - transform ocp interface protocol to scp protocol
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+static int ocp2scp_remove_devices(struct device *dev, void *c)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	platform_device_unregister(pdev);
+
+	return 0;
+}
+
+static int __devinit omap_ocp2scp_probe(struct platform_device *pdev)
+{
+	int			ret;
+	struct device_node	*np = pdev->dev.of_node;
+
+	if (np) {
+		ret = of_platform_populate(np, NULL, NULL, &pdev->dev);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to add resources for ocp2scp child\n");
+			goto err0;
+		}
+	}
+	pm_runtime_enable(&pdev->dev);
+
+	return 0;
+
+err0:
+	device_for_each_child(&pdev->dev, NULL, ocp2scp_remove_devices);
+
+	return ret;
+}
+
+static int __devexit omap_ocp2scp_remove(struct platform_device *pdev)
+{
+	pm_runtime_disable(&pdev->dev);
+	device_for_each_child(&pdev->dev, NULL, ocp2scp_remove_devices);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id omap_ocp2scp_id_table[] = {
+	{ .compatible = "ti,omap-ocp2scp" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, omap_usb2_id_table);
+#endif
+
+static struct platform_driver omap_ocp2scp_driver = {
+	.probe		= omap_ocp2scp_probe,
+	.remove		= __devexit_p(omap_ocp2scp_remove),
+	.driver		= {
+		.name	= "omap-ocp2scp",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(omap_ocp2scp_id_table),
+	},
+};
+
+module_platform_driver(omap_ocp2scp_driver);
+
+MODULE_ALIAS("platform: omap-ocp2scp");
+MODULE_AUTHOR("Texas Instruments Inc.");
+MODULE_DESCRIPTION("OMAP OCP2SCP driver");
+MODULE_LICENSE("GPL v2");