ide: preparations for /proc/ide/hd*/settings rework
After rework settings will be no longer created dynamically
for each device so we need to make some fixups first.
* Use set_[ksettings,unmaskirq]() as a set function for
["keepsettings","unmaskirq"] setting.
* Allow writes to ["io_32bit","unmaskirq"] settings also when
drive->no_[io_32bit,unmask] is set (this is checked later inside
set_[io_32bit,unmaskirq]() anywyay and keeps consistency with
the corresponding HDIO_SET_[32BIT,UNMASKINTR] ioctls).
* Use max possible multi sectors value (16) as an allowed max for
"multcount" setting. set_multcount() set function checks against
device's max possbile value anyway and it makes the proc setting
consistent with the corresponding HDIO_SET_MULTCOUNT ioctl.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 5fc42134..7a15907 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -760,8 +760,7 @@
&drive->bios_sect, NULL);
ide_add_setting(drive, "address", SETTING_RW, TYPE_BYTE, 0, 2, 1, 1,
&drive->addressing, set_lba_addressing);
- ide_add_setting(drive, "multcount", SETTING_RW, TYPE_BYTE, 0,
- drive->id[ATA_ID_MAX_MULTSECT] & 0xff, 1, 1,
+ ide_add_setting(drive, "multcount", SETTING_RW, TYPE_BYTE, 0, 16, 1, 1,
&drive->mult_count, set_multcount);
ide_add_setting(drive, "nowerr", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1,
&drive->nowerr, set_nowerr);
diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c
index cbe5a7e..7a64aed 100644
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -368,11 +368,11 @@
/*
* drive setting name read/write access data type min max mul_factor div_factor data pointer set function
*/
- __ide_add_setting(drive, "io_32bit", drive->no_io_32bit ? SETTING_READ : SETTING_RW, TYPE_BYTE, 0, 1 + (SUPPORT_VLB_SYNC << 1), 1, 1, &drive->io_32bit, set_io_32bit, 0);
- __ide_add_setting(drive, "keepsettings", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->keep_settings, NULL, 0);
+ __ide_add_setting(drive, "io_32bit", SETTING_RW, TYPE_BYTE, 0, 1 + (SUPPORT_VLB_SYNC << 1), 1, 1, &drive->io_32bit, set_io_32bit, 0);
+ __ide_add_setting(drive, "keepsettings", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->keep_settings, set_ksettings, 0);
__ide_add_setting(drive, "nice1", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->nice1, NULL, 0);
__ide_add_setting(drive, "pio_mode", SETTING_WRITE, TYPE_BYTE, 0, 255, 1, 1, NULL, set_pio_mode, 0);
- __ide_add_setting(drive, "unmaskirq", drive->no_unmask ? SETTING_READ : SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->unmask, NULL, 0);
+ __ide_add_setting(drive, "unmaskirq", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->unmask, set_unmaskirq, 0);
__ide_add_setting(drive, "using_dma", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->using_dma, set_using_dma, 0);
__ide_add_setting(drive, "init_speed", SETTING_RW, TYPE_BYTE, 0, 70, 1, 1, &drive->init_speed, NULL, 0);
__ide_add_setting(drive, "current_speed", SETTING_RW, TYPE_BYTE, 0, 70, 1, 1, &drive->current_speed, set_xfer_rate, 0);
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 080314e..8e0c9f2 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -305,7 +305,7 @@
return 0;
}
-static int set_ksettings(ide_drive_t *drive, int arg)
+int set_ksettings(ide_drive_t *drive, int arg)
{
if (arg < 0 || arg > 1)
return -EINVAL;
@@ -394,7 +394,7 @@
return 0;
}
-static int set_unmaskirq(ide_drive_t *drive, int arg)
+int set_unmaskirq(ide_drive_t *drive, int arg)
{
if (drive->no_unmask)
return -EPERM;
diff --git a/include/linux/ide.h b/include/linux/ide.h
index a7f980d..ad09e7c 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -688,7 +688,9 @@
extern struct mutex ide_setting_mtx;
int set_io_32bit(ide_drive_t *, int);
+int set_ksettings(ide_drive_t *, int);
int set_pio_mode(ide_drive_t *, int);
+int set_unmaskirq(ide_drive_t *, int);
int set_using_dma(ide_drive_t *, int);
/* ATAPI packet command flags */