kconfig: syntax cleanup - drop support for "depends/requires/def_boolean"
Remove the following redundant and never or rarely used kconfig syntax:
- "def_boolean" (same as "def_bool")
- "requires" (same as "depends on")
- "depends" (same as "depends on")
This patch contains the code changes and Kconfig updates.
The shipped files are in next patch to let actual codechange stand out.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index b24f453..aa9db30 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -758,7 +758,7 @@
choice
prompt "Uncached SDRAM region"
default DMA_UNCACHED_1M
- depends BFIN_DMA_5XX
+ depends on BFIN_DMA_5XX
config DMA_UNCACHED_2M
bool "Enable 2M DMA region"
config DMA_UNCACHED_1M
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 464f9b4..c939fe8 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -144,7 +144,7 @@
config BOOTX_TEXT
bool "Support for early boot text console (BootX or OpenFirmware only)"
- depends PPC_OF && PPC_MULTIPLATFORM
+ depends on PPC_OF && PPC_MULTIPLATFORM
help
Say Y here to see progress messages from the boot firmware in text
mode. Requires either BootX or Open Firmware.
@@ -234,12 +234,12 @@
config PPC_EARLY_DEBUG_44x_PHYSLOW
hex "Low 32 bits of early debug UART physical address"
- depends PPC_EARLY_DEBUG_44x
+ depends on PPC_EARLY_DEBUG_44x
default "0x40000200"
config PPC_EARLY_DEBUG_44x_PHYSHIGH
hex "EPRN of early debug UART physical address"
- depends PPC_EARLY_DEBUG_44x
+ depends on PPC_EARLY_DEBUG_44x
default "0x1"
config PPC_EARLY_DEBUG_CPM_ADDR
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index cc6013f..186397f 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -117,7 +117,7 @@
config PPC_PMI
tristate "Support for PMI"
- depends PPC_IBM_CELL_BLADE
+ depends on PPC_IBM_CELL_BLADE
help
PMI (Platform Management Interrupt) is a way to
communicate with the BMC (Baseboard Mangement Controller).
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index d602b8f..7acc635 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -152,7 +152,7 @@
config INPUT_YEALINK
tristate "Yealink usb-p1k voip phone"
- depends EXPERIMENTAL
+ depends on EXPERIMENTAL
depends on USB_ARCH_HAS_HCD
select USB
help
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 3cb2321..c12bd66 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -83,7 +83,7 @@
config LEDS_H1940
tristate "LED Support for iPAQ H1940 device"
- depends LEDS_CLASS && ARCH_H1940
+ depends on LEDS_CLASS && ARCH_H1940
help
This option enables support for the LEDs on the h1940.
diff --git a/drivers/telephony/Kconfig b/drivers/telephony/Kconfig
index 5f98f67..b5f78b6 100644
--- a/drivers/telephony/Kconfig
+++ b/drivers/telephony/Kconfig
@@ -19,7 +19,7 @@
config PHONE_IXJ
tristate "QuickNet Internet LineJack/PhoneJack support"
- depends ISA || PCI
+ depends on ISA || PCI
---help---
Say M if you have a telephony card manufactured by Quicknet
Technologies, Inc. These include the Internet PhoneJACK and
diff --git a/scripts/kconfig/zconf.gperf b/scripts/kconfig/zconf.gperf
index 9b44c80..93538e5 100644
--- a/scripts/kconfig/zconf.gperf
+++ b/scripts/kconfig/zconf.gperf
@@ -23,7 +23,6 @@
if, T_IF, TF_COMMAND|TF_PARAM
endif, T_ENDIF, TF_COMMAND
depends, T_DEPENDS, TF_COMMAND
-requires, T_REQUIRES, TF_COMMAND
optional, T_OPTIONAL, TF_COMMAND
default, T_DEFAULT, TF_COMMAND, S_UNKNOWN
prompt, T_PROMPT, TF_COMMAND
@@ -32,7 +31,6 @@
bool, T_TYPE, TF_COMMAND, S_BOOLEAN
boolean, T_TYPE, TF_COMMAND, S_BOOLEAN
def_bool, T_DEFAULT, TF_COMMAND, S_BOOLEAN
-def_boolean, T_DEFAULT, TF_COMMAND, S_BOOLEAN
int, T_TYPE, TF_COMMAND, S_INT
hex, T_TYPE, TF_COMMAND, S_HEX
string, T_TYPE, TF_COMMAND, S_STRING
diff --git a/scripts/kconfig/zconf.y b/scripts/kconfig/zconf.y
index 79db4cf..d9b96ba 100644
--- a/scripts/kconfig/zconf.y
+++ b/scripts/kconfig/zconf.y
@@ -64,7 +64,6 @@
%token <id>T_IF
%token <id>T_ENDIF
%token <id>T_DEPENDS
-%token <id>T_REQUIRES
%token <id>T_OPTIONAL
%token <id>T_PROMPT
%token <id>T_TYPE
@@ -418,16 +417,6 @@
{
menu_add_dep($3);
printd(DEBUG_PARSE, "%s:%d:depends on\n", zconf_curname(), zconf_lineno());
-}
- | T_DEPENDS expr T_EOL
-{
- menu_add_dep($2);
- printd(DEBUG_PARSE, "%s:%d:depends\n", zconf_curname(), zconf_lineno());
-}
- | T_REQUIRES expr T_EOL
-{
- menu_add_dep($2);
- printd(DEBUG_PARSE, "%s:%d:requires\n", zconf_curname(), zconf_lineno());
};
/* prompt statement */