V4L/DVB (12272): cx23885: add card Magic-Pro ProHDTV Extreme 2
cx23885: add card Magic-Pro ProHDTV Extreme 2 PCI-E.
Signed-off-by: David T.L. Wong <davidtlwong@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885
index 450b8f8..19feb51 100644
--- a/Documentation/video4linux/CARDLIST.cx23885
+++ b/Documentation/video4linux/CARDLIST.cx23885
@@ -21,3 +21,4 @@
20 -> Hauppauge WinTV-HVR1255 [0070:2251]
21 -> Hauppauge WinTV-HVR1210 [0070:2291,0070:2295]
22 -> Mygica X8506 DMB-TH [14f1:8651]
+ 23 -> Magic-Pro ProHDTV Extreme 2 [14f1:8657]
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index ce29b5e..a9d3629 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -201,6 +201,10 @@
.name = "Mygica X8506 DMB-TH",
.portb = CX23885_MPEG_DVB,
},
+ [CX23885_BOARD_MAGICPRO_PROHDTVE2] = {
+ .name = "Magic-Pro ProHDTV Extreme 2",
+ .portb = CX23885_MPEG_DVB,
+ },
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
@@ -324,6 +328,10 @@
.subvendor = 0x14f1,
.subdevice = 0x8651,
.card = CX23885_BOARD_MYGICA_X8506,
+ }, {
+ .subvendor = 0x14f1,
+ .subdevice = 0x8657,
+ .card = CX23885_BOARD_MAGICPRO_PROHDTVE2,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -715,8 +723,9 @@
cx23885_gpio_set(dev, GPIO_9);
break;
case CX23885_BOARD_MYGICA_X8506:
+ case CX23885_BOARD_MAGICPRO_PROHDTVE2:
/* GPIO-1 reset XC5000 */
- /* GPIO-2 reset LGS8GL5 */
+ /* GPIO-2 reset LGS8GL5 / LGS8G75 */
cx_set(GP0_IO, 0x00060000);
cx_clear(GP0_IO, 0x00000006);
mdelay(100);
@@ -827,6 +836,7 @@
ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
case CX23885_BOARD_MYGICA_X8506:
+ case CX23885_BOARD_MAGICPRO_PROHDTVE2:
ts1->gen_ctrl_val = 0x5; /* Parallel */
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 86ac529..e4a22dc 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -487,6 +487,26 @@
port->set_frontend_save(fe, param) : -ENODEV;
}
+static struct lgs8gxx_config magicpro_prohdtve2_lgs8g75_config = {
+ .prod = LGS8GXX_PROD_LGS8G75,
+ .demod_address = 0x19,
+ .serial_ts = 0,
+ .ts_clk_pol = 1,
+ .ts_clk_gated = 1,
+ .if_clk_freq = 30400, /* 30.4 MHz */
+ .if_freq = 6500, /* 6.50 MHz */
+ .if_neg_center = 1,
+ .ext_adc = 0,
+ .adc_signed = 1,
+ .adc_vpp = 2, /* 1.6 Vpp */
+ .if_neg_edge = 1,
+};
+
+static struct xc5000_config magicpro_prohdtve2_xc5000_config = {
+ .i2c_address = 0x61,
+ .if_khz = 6500,
+};
+
static int dvb_register(struct cx23885_tsport *port)
{
struct cx23885_dev *dev = port->dev;
@@ -833,6 +853,19 @@
&mygica_x8506_xc5000_config);
}
break;
+ case CX23885_BOARD_MAGICPRO_PROHDTVE2:
+ i2c_bus = &dev->i2c_bus[0];
+ i2c_bus2 = &dev->i2c_bus[1];
+ fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
+ &magicpro_prohdtve2_lgs8g75_config,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(xc5000_attach,
+ fe0->dvb.frontend,
+ &i2c_bus2->i2c_adap,
+ &magicpro_prohdtve2_xc5000_config);
+ }
+ break;
default:
printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
" isn't supported yet\n",
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index 76a5150..d68574d 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -76,6 +76,7 @@
#define CX23885_BOARD_HAUPPAUGE_HVR1255 20
#define CX23885_BOARD_HAUPPAUGE_HVR1210 21
#define CX23885_BOARD_MYGICA_X8506 22
+#define CX23885_BOARD_MAGICPRO_PROHDTVE2 23
#define GPIO_0 0x00000001
#define GPIO_1 0x00000002