Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
new file mode 100644
index 0000000..5d386f4
--- /dev/null
+++ b/drivers/char/vt_ioctl.c
@@ -0,0 +1,1201 @@
+/*
+ * linux/drivers/char/vt_ioctl.c
+ *
+ * Copyright (C) 1992 obz under the linux copyright
+ *
+ * Dynamic diacritical handling - aeb@cwi.nl - Dec 1993
+ * Dynamic keymap and string allocation - aeb@cwi.nl - May 1994
+ * Restrict VT switching via ioctl() - grif@cs.ucr.edu - Dec 1995
+ * Some code moved for less code duplication - Andi Kleen - Mar 1997
+ * Check put/get_user, cleanups - acme@conectiva.com.br - Jun 2001
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/tty.h>
+#include <linux/timer.h>
+#include <linux/kernel.h>
+#include <linux/kd.h>
+#include <linux/vt.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/major.h>
+#include <linux/fs.h>
+#include <linux/console.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#include <linux/kbd_kern.h>
+#include <linux/vt_kern.h>
+#include <linux/kbd_diacr.h>
+#include <linux/selection.h>
+
+static char vt_dont_switch;
+extern struct tty_driver *console_driver;
+
+#define VT_IS_IN_USE(i) (console_driver->ttys[i] && console_driver->ttys[i]->count)
+#define VT_BUSY(i) (VT_IS_IN_USE(i) || i == fg_console || vc_cons[i].d == sel_cons)
+
+/*
+ * Console (vt and kd) routines, as defined by USL SVR4 manual, and by
+ * experimentation and study of X386 SYSV handling.
+ *
+ * One point of difference: SYSV vt's are /dev/vtX, which X >= 0, and
+ * /dev/console is a separate ttyp. Under Linux, /dev/tty0 is /dev/console,
+ * and the vc start at /dev/ttyX, X >= 1. We maintain that here, so we will
+ * always treat our set of vt as numbered 1..MAX_NR_CONSOLES (corresponding to
+ * ttys 0..MAX_NR_CONSOLES-1). Explicitly naming VT 0 is illegal, but using
+ * /dev/tty0 (fg_console) as a target is legal, since an implicit aliasing
+ * to the current console is done by the main ioctl code.
+ */
+
+#ifdef CONFIG_X86
+#include <linux/syscalls.h>
+#endif
+
+static void complete_change_console(struct vc_data *vc);
+
+/*
+ * these are the valid i/o ports we're allowed to change. they map all the
+ * video ports
+ */
+#define GPFIRST 0x3b4
+#define GPLAST 0x3df
+#define GPNUM (GPLAST - GPFIRST + 1)
+
+#define i (tmp.kb_index)
+#define s (tmp.kb_table)
+#define v (tmp.kb_value)
+static inline int
+do_kdsk_ioctl(int cmd, struct kbentry __user *user_kbe, int perm, struct kbd_struct *kbd)
+{
+ struct kbentry tmp;
+ ushort *key_map, val, ov;
+
+ if (copy_from_user(&tmp, user_kbe, sizeof(struct kbentry)))
+ return -EFAULT;
+
+ switch (cmd) {
+ case KDGKBENT:
+ key_map = key_maps[s];
+ if (key_map) {
+ val = U(key_map[i]);
+ if (kbd->kbdmode != VC_UNICODE && KTYP(val) >= NR_TYPES)
+ val = K_HOLE;
+ } else
+ val = (i ? K_HOLE : K_NOSUCHMAP);
+ return put_user(val, &user_kbe->kb_value);
+ case KDSKBENT:
+ if (!perm)
+ return -EPERM;
+ if (!i && v == K_NOSUCHMAP) {
+ /* disallocate map */
+ key_map = key_maps[s];
+ if (s && key_map) {
+ key_maps[s] = NULL;
+ if (key_map[0] == U(K_ALLOCATED)) {
+ kfree(key_map);
+ keymap_count--;
+ }
+ }
+ break;
+ }
+
+ if (KTYP(v) < NR_TYPES) {
+ if (KVAL(v) > max_vals[KTYP(v)])
+ return -EINVAL;
+ } else
+ if (kbd->kbdmode != VC_UNICODE)
+ return -EINVAL;
+
+ /* ++Geert: non-PC keyboards may generate keycode zero */
+#if !defined(__mc68000__) && !defined(__powerpc__)
+ /* assignment to entry 0 only tests validity of args */
+ if (!i)
+ break;
+#endif
+
+ if (!(key_map = key_maps[s])) {
+ int j;
+
+ if (keymap_count >= MAX_NR_OF_USER_KEYMAPS &&
+ !capable(CAP_SYS_RESOURCE))
+ return -EPERM;
+
+ key_map = (ushort *) kmalloc(sizeof(plain_map),
+ GFP_KERNEL);
+ if (!key_map)
+ return -ENOMEM;
+ key_maps[s] = key_map;
+ key_map[0] = U(K_ALLOCATED);
+ for (j = 1; j < NR_KEYS; j++)
+ key_map[j] = U(K_HOLE);
+ keymap_count++;
+ }
+ ov = U(key_map[i]);
+ if (v == ov)
+ break; /* nothing to do */
+ /*
+ * Attention Key.
+ */
+ if (((ov == K_SAK) || (v == K_SAK)) && !capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ key_map[i] = U(v);
+ if (!s && (KTYP(ov) == KT_SHIFT || KTYP(v) == KT_SHIFT))
+ compute_shiftstate();
+ break;
+ }
+ return 0;
+}
+#undef i
+#undef s
+#undef v
+
+static inline int
+do_kbkeycode_ioctl(int cmd, struct kbkeycode __user *user_kbkc, int perm)
+{
+ struct kbkeycode tmp;
+ int kc = 0;
+
+ if (copy_from_user(&tmp, user_kbkc, sizeof(struct kbkeycode)))
+ return -EFAULT;
+ switch (cmd) {
+ case KDGETKEYCODE:
+ kc = getkeycode(tmp.scancode);
+ if (kc >= 0)
+ kc = put_user(kc, &user_kbkc->keycode);
+ break;
+ case KDSETKEYCODE:
+ if (!perm)
+ return -EPERM;
+ kc = setkeycode(tmp.scancode, tmp.keycode);
+ break;
+ }
+ return kc;
+}
+
+static inline int
+do_kdgkb_ioctl(int cmd, struct kbsentry __user *user_kdgkb, int perm)
+{
+ struct kbsentry *kbs;
+ char *p;
+ u_char *q;
+ u_char __user *up;
+ int sz;
+ int delta;
+ char *first_free, *fj, *fnw;
+ int i, j, k;
+ int ret;
+
+ kbs = kmalloc(sizeof(*kbs), GFP_KERNEL);
+ if (!kbs) {
+ ret = -ENOMEM;
+ goto reterr;
+ }
+
+ /* we mostly copy too much here (512bytes), but who cares ;) */
+ if (copy_from_user(kbs, user_kdgkb, sizeof(struct kbsentry))) {
+ ret = -EFAULT;
+ goto reterr;
+ }
+ kbs->kb_string[sizeof(kbs->kb_string)-1] = '\0';
+ i = kbs->kb_func;
+
+ switch (cmd) {
+ case KDGKBSENT:
+ sz = sizeof(kbs->kb_string) - 1; /* sz should have been
+ a struct member */
+ up = user_kdgkb->kb_string;
+ p = func_table[i];
+ if(p)
+ for ( ; *p && sz; p++, sz--)
+ if (put_user(*p, up++)) {
+ ret = -EFAULT;
+ goto reterr;
+ }
+ if (put_user('\0', up)) {
+ ret = -EFAULT;
+ goto reterr;
+ }
+ kfree(kbs);
+ return ((p && *p) ? -EOVERFLOW : 0);
+ case KDSKBSENT:
+ if (!perm) {
+ ret = -EPERM;
+ goto reterr;
+ }
+
+ q = func_table[i];
+ first_free = funcbufptr + (funcbufsize - funcbufleft);
+ for (j = i+1; j < MAX_NR_FUNC && !func_table[j]; j++)
+ ;
+ if (j < MAX_NR_FUNC)
+ fj = func_table[j];
+ else
+ fj = first_free;
+
+ delta = (q ? -strlen(q) : 1) + strlen(kbs->kb_string);
+ if (delta <= funcbufleft) { /* it fits in current buf */
+ if (j < MAX_NR_FUNC) {
+ memmove(fj + delta, fj, first_free - fj);
+ for (k = j; k < MAX_NR_FUNC; k++)
+ if (func_table[k])
+ func_table[k] += delta;
+ }
+ if (!q)
+ func_table[i] = fj;
+ funcbufleft -= delta;
+ } else { /* allocate a larger buffer */
+ sz = 256;
+ while (sz < funcbufsize - funcbufleft + delta)
+ sz <<= 1;
+ fnw = (char *) kmalloc(sz, GFP_KERNEL);
+ if(!fnw) {
+ ret = -ENOMEM;
+ goto reterr;
+ }
+
+ if (!q)
+ func_table[i] = fj;
+ if (fj > funcbufptr)
+ memmove(fnw, funcbufptr, fj - funcbufptr);
+ for (k = 0; k < j; k++)
+ if (func_table[k])
+ func_table[k] = fnw + (func_table[k] - funcbufptr);
+
+ if (first_free > fj) {
+ memmove(fnw + (fj - funcbufptr) + delta, fj, first_free - fj);
+ for (k = j; k < MAX_NR_FUNC; k++)
+ if (func_table[k])
+ func_table[k] = fnw + (func_table[k] - funcbufptr) + delta;
+ }
+ if (funcbufptr != func_buf)
+ kfree(funcbufptr);
+ funcbufptr = fnw;
+ funcbufleft = funcbufleft - delta + sz - funcbufsize;
+ funcbufsize = sz;
+ }
+ strcpy(func_table[i], kbs->kb_string);
+ break;
+ }
+ ret = 0;
+reterr:
+ kfree(kbs);
+ return ret;
+}
+
+static inline int
+do_fontx_ioctl(int cmd, struct consolefontdesc __user *user_cfd, int perm, struct console_font_op *op)
+{
+ struct consolefontdesc cfdarg;
+ int i;
+
+ if (copy_from_user(&cfdarg, user_cfd, sizeof(struct consolefontdesc)))
+ return -EFAULT;
+
+ switch (cmd) {
+ case PIO_FONTX:
+ if (!perm)
+ return -EPERM;
+ op->op = KD_FONT_OP_SET;
+ op->flags = KD_FONT_FLAG_OLD;
+ op->width = 8;
+ op->height = cfdarg.charheight;
+ op->charcount = cfdarg.charcount;
+ op->data = cfdarg.chardata;
+ return con_font_op(vc_cons[fg_console].d, op);
+ case GIO_FONTX: {
+ op->op = KD_FONT_OP_GET;
+ op->flags = KD_FONT_FLAG_OLD;
+ op->width = 8;
+ op->height = cfdarg.charheight;
+ op->charcount = cfdarg.charcount;
+ op->data = cfdarg.chardata;
+ i = con_font_op(vc_cons[fg_console].d, op);
+ if (i)
+ return i;
+ cfdarg.charheight = op->height;
+ cfdarg.charcount = op->charcount;
+ if (copy_to_user(user_cfd, &cfdarg, sizeof(struct consolefontdesc)))
+ return -EFAULT;
+ return 0;
+ }
+ }
+ return -EINVAL;
+}
+
+static inline int
+do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud, int perm, struct vc_data *vc)
+{
+ struct unimapdesc tmp;
+
+ if (copy_from_user(&tmp, user_ud, sizeof tmp))
+ return -EFAULT;
+ if (tmp.entries)
+ if (!access_ok(VERIFY_WRITE, tmp.entries,
+ tmp.entry_ct*sizeof(struct unipair)))
+ return -EFAULT;
+ switch (cmd) {
+ case PIO_UNIMAP:
+ if (!perm)
+ return -EPERM;
+ return con_set_unimap(vc, tmp.entry_ct, tmp.entries);
+ case GIO_UNIMAP:
+ if (!perm && fg_console != vc->vc_num)
+ return -EPERM;
+ return con_get_unimap(vc, tmp.entry_ct, &(user_ud->entry_ct), tmp.entries);
+ }
+ return 0;
+}
+
+/*
+ * We handle the console-specific ioctl's here. We allow the
+ * capability to modify any console, not just the fg_console.
+ */
+int vt_ioctl(struct tty_struct *tty, struct file * file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct vc_data *vc = (struct vc_data *)tty->driver_data;
+ struct console_font_op op; /* used in multiple places here */
+ struct kbd_struct * kbd;
+ unsigned int console;
+ unsigned char ucval;
+ void __user *up = (void __user *)arg;
+ int i, perm;
+
+ console = vc->vc_num;
+
+ if (!vc_cons_allocated(console)) /* impossible? */
+ return -ENOIOCTLCMD;
+
+ /*
+ * To have permissions to do most of the vt ioctls, we either have
+ * to be the owner of the tty, or have CAP_SYS_TTY_CONFIG.
+ */
+ perm = 0;
+ if (current->signal->tty == tty || capable(CAP_SYS_TTY_CONFIG))
+ perm = 1;
+
+ kbd = kbd_table + console;
+ switch (cmd) {
+ case KIOCSOUND:
+ if (!perm)
+ return -EPERM;
+ if (arg)
+ arg = 1193182 / arg;
+ kd_mksound(arg, 0);
+ return 0;
+
+ case KDMKTONE:
+ if (!perm)
+ return -EPERM;
+ {
+ unsigned int ticks, count;
+
+ /*
+ * Generate the tone for the appropriate number of ticks.
+ * If the time is zero, turn off sound ourselves.
+ */
+ ticks = HZ * ((arg >> 16) & 0xffff) / 1000;
+ count = ticks ? (arg & 0xffff) : 0;
+ if (count)
+ count = 1193182 / count;
+ kd_mksound(count, ticks);
+ return 0;
+ }
+
+ case KDGKBTYPE:
+ /*
+ * this is naive.
+ */
+ ucval = KB_101;
+ goto setchar;
+
+ /*
+ * These cannot be implemented on any machine that implements
+ * ioperm() in user level (such as Alpha PCs) or not at all.
+ *
+ * XXX: you should never use these, just call ioperm directly..
+ */
+#ifdef CONFIG_X86
+ case KDADDIO:
+ case KDDELIO:
+ /*
+ * KDADDIO and KDDELIO may be able to add ports beyond what
+ * we reject here, but to be safe...
+ */
+ if (arg < GPFIRST || arg > GPLAST)
+ return -EINVAL;
+ return sys_ioperm(arg, 1, (cmd == KDADDIO)) ? -ENXIO : 0;
+
+ case KDENABIO:
+ case KDDISABIO:
+ return sys_ioperm(GPFIRST, GPNUM,
+ (cmd == KDENABIO)) ? -ENXIO : 0;
+#endif
+
+ /* Linux m68k/i386 interface for setting the keyboard delay/repeat rate */
+
+ case KDKBDREP:
+ {
+ struct kbd_repeat kbrep;
+ int err;
+
+ if (!capable(CAP_SYS_TTY_CONFIG))
+ return -EPERM;
+
+ if (copy_from_user(&kbrep, up, sizeof(struct kbd_repeat)))
+ return -EFAULT;
+ err = kbd_rate(&kbrep);
+ if (err)
+ return err;
+ if (copy_to_user(up, &kbrep, sizeof(struct kbd_repeat)))
+ return -EFAULT;
+ return 0;
+ }
+
+ case KDSETMODE:
+ /*
+ * currently, setting the mode from KD_TEXT to KD_GRAPHICS
+ * doesn't do a whole lot. i'm not sure if it should do any
+ * restoration of modes or what...
+ *
+ * XXX It should at least call into the driver, fbdev's definitely
+ * need to restore their engine state. --BenH
+ */
+ if (!perm)
+ return -EPERM;
+ switch (arg) {
+ case KD_GRAPHICS:
+ break;
+ case KD_TEXT0:
+ case KD_TEXT1:
+ arg = KD_TEXT;
+ case KD_TEXT:
+ break;
+ default:
+ return -EINVAL;
+ }
+ if (vc->vc_mode == (unsigned char) arg)
+ return 0;
+ vc->vc_mode = (unsigned char) arg;
+ if (console != fg_console)
+ return 0;
+ /*
+ * explicitly blank/unblank the screen if switching modes
+ */
+ acquire_console_sem();
+ if (arg == KD_TEXT)
+ do_unblank_screen(1);
+ else
+ do_blank_screen(1);
+ release_console_sem();
+ return 0;
+
+ case KDGETMODE:
+ ucval = vc->vc_mode;
+ goto setint;
+
+ case KDMAPDISP:
+ case KDUNMAPDISP:
+ /*
+ * these work like a combination of mmap and KDENABIO.
+ * this could be easily finished.
+ */
+ return -EINVAL;
+
+ case KDSKBMODE:
+ if (!perm)
+ return -EPERM;
+ switch(arg) {
+ case K_RAW:
+ kbd->kbdmode = VC_RAW;
+ break;
+ case K_MEDIUMRAW:
+ kbd->kbdmode = VC_MEDIUMRAW;
+ break;
+ case K_XLATE:
+ kbd->kbdmode = VC_XLATE;
+ compute_shiftstate();
+ break;
+ case K_UNICODE:
+ kbd->kbdmode = VC_UNICODE;
+ compute_shiftstate();
+ break;
+ default:
+ return -EINVAL;
+ }
+ tty_ldisc_flush(tty);
+ return 0;
+
+ case KDGKBMODE:
+ ucval = ((kbd->kbdmode == VC_RAW) ? K_RAW :
+ (kbd->kbdmode == VC_MEDIUMRAW) ? K_MEDIUMRAW :
+ (kbd->kbdmode == VC_UNICODE) ? K_UNICODE :
+ K_XLATE);
+ goto setint;
+
+ /* this could be folded into KDSKBMODE, but for compatibility
+ reasons it is not so easy to fold KDGKBMETA into KDGKBMODE */
+ case KDSKBMETA:
+ switch(arg) {
+ case K_METABIT:
+ clr_vc_kbd_mode(kbd, VC_META);
+ break;
+ case K_ESCPREFIX:
+ set_vc_kbd_mode(kbd, VC_META);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+
+ case KDGKBMETA:
+ ucval = (vc_kbd_mode(kbd, VC_META) ? K_ESCPREFIX : K_METABIT);
+ setint:
+ return put_user(ucval, (int __user *)arg);
+
+ case KDGETKEYCODE:
+ case KDSETKEYCODE:
+ if(!capable(CAP_SYS_TTY_CONFIG))
+ perm=0;
+ return do_kbkeycode_ioctl(cmd, up, perm);
+
+ case KDGKBENT:
+ case KDSKBENT:
+ return do_kdsk_ioctl(cmd, up, perm, kbd);
+
+ case KDGKBSENT:
+ case KDSKBSENT:
+ return do_kdgkb_ioctl(cmd, up, perm);
+
+ case KDGKBDIACR:
+ {
+ struct kbdiacrs __user *a = up;
+
+ if (put_user(accent_table_size, &a->kb_cnt))
+ return -EFAULT;
+ if (copy_to_user(a->kbdiacr, accent_table, accent_table_size*sizeof(struct kbdiacr)))
+ return -EFAULT;
+ return 0;
+ }
+
+ case KDSKBDIACR:
+ {
+ struct kbdiacrs __user *a = up;
+ unsigned int ct;
+
+ if (!perm)
+ return -EPERM;
+ if (get_user(ct,&a->kb_cnt))
+ return -EFAULT;
+ if (ct >= MAX_DIACR)
+ return -EINVAL;
+ accent_table_size = ct;
+ if (copy_from_user(accent_table, a->kbdiacr, ct*sizeof(struct kbdiacr)))
+ return -EFAULT;
+ return 0;
+ }
+
+ /* the ioctls below read/set the flags usually shown in the leds */
+ /* don't use them - they will go away without warning */
+ case KDGKBLED:
+ ucval = kbd->ledflagstate | (kbd->default_ledflagstate << 4);
+ goto setchar;
+
+ case KDSKBLED:
+ if (!perm)
+ return -EPERM;
+ if (arg & ~0x77)
+ return -EINVAL;
+ kbd->ledflagstate = (arg & 7);
+ kbd->default_ledflagstate = ((arg >> 4) & 7);
+ set_leds();
+ return 0;
+
+ /* the ioctls below only set the lights, not the functions */
+ /* for those, see KDGKBLED and KDSKBLED above */
+ case KDGETLED:
+ ucval = getledstate();
+ setchar:
+ return put_user(ucval, (char __user *)arg);
+
+ case KDSETLED:
+ if (!perm)
+ return -EPERM;
+ setledstate(kbd, arg);
+ return 0;
+
+ /*
+ * A process can indicate its willingness to accept signals
+ * generated by pressing an appropriate key combination.
+ * Thus, one can have a daemon that e.g. spawns a new console
+ * upon a keypress and then changes to it.
+ * See also the kbrequest field of inittab(5).
+ */
+ case KDSIGACCEPT:
+ {
+ extern int spawnpid, spawnsig;
+ if (!perm || !capable(CAP_KILL))
+ return -EPERM;
+ if (arg < 1 || arg > _NSIG || arg == SIGKILL)
+ return -EINVAL;
+ spawnpid = current->pid;
+ spawnsig = arg;
+ return 0;
+ }
+
+ case VT_SETMODE:
+ {
+ struct vt_mode tmp;
+
+ if (!perm)
+ return -EPERM;
+ if (copy_from_user(&tmp, up, sizeof(struct vt_mode)))
+ return -EFAULT;
+ if (tmp.mode != VT_AUTO && tmp.mode != VT_PROCESS)
+ return -EINVAL;
+ acquire_console_sem();
+ vc->vt_mode = tmp;
+ /* the frsig is ignored, so we set it to 0 */
+ vc->vt_mode.frsig = 0;
+ vc->vt_pid = current->pid;
+ /* no switch is required -- saw@shade.msu.ru */
+ vc->vt_newvt = -1;
+ release_console_sem();
+ return 0;
+ }
+
+ case VT_GETMODE:
+ {
+ struct vt_mode tmp;
+ int rc;
+
+ acquire_console_sem();
+ memcpy(&tmp, &vc->vt_mode, sizeof(struct vt_mode));
+ release_console_sem();
+
+ rc = copy_to_user(up, &tmp, sizeof(struct vt_mode));
+ return rc ? -EFAULT : 0;
+ }
+
+ /*
+ * Returns global vt state. Note that VT 0 is always open, since
+ * it's an alias for the current VT, and people can't use it here.
+ * We cannot return state for more than 16 VTs, since v_state is short.
+ */
+ case VT_GETSTATE:
+ {
+ struct vt_stat __user *vtstat = up;
+ unsigned short state, mask;
+
+ if (put_user(fg_console + 1, &vtstat->v_active))
+ return -EFAULT;
+ state = 1; /* /dev/tty0 is always open */
+ for (i = 0, mask = 2; i < MAX_NR_CONSOLES && mask; ++i, mask <<= 1)
+ if (VT_IS_IN_USE(i))
+ state |= mask;
+ return put_user(state, &vtstat->v_state);
+ }
+
+ /*
+ * Returns the first available (non-opened) console.
+ */
+ case VT_OPENQRY:
+ for (i = 0; i < MAX_NR_CONSOLES; ++i)
+ if (! VT_IS_IN_USE(i))
+ break;
+ ucval = i < MAX_NR_CONSOLES ? (i+1) : -1;
+ goto setint;
+
+ /*
+ * ioctl(fd, VT_ACTIVATE, num) will cause us to switch to vt # num,
+ * with num >= 1 (switches to vt 0, our console, are not allowed, just
+ * to preserve sanity).
+ */
+ case VT_ACTIVATE:
+ if (!perm)
+ return -EPERM;
+ if (arg == 0 || arg > MAX_NR_CONSOLES)
+ return -ENXIO;
+ arg--;
+ acquire_console_sem();
+ i = vc_allocate(arg);
+ release_console_sem();
+ if (i)
+ return i;
+ set_console(arg);
+ return 0;
+
+ /*
+ * wait until the specified VT has been activated
+ */
+ case VT_WAITACTIVE:
+ if (!perm)
+ return -EPERM;
+ if (arg == 0 || arg > MAX_NR_CONSOLES)
+ return -ENXIO;
+ return vt_waitactive(arg-1);
+
+ /*
+ * If a vt is under process control, the kernel will not switch to it
+ * immediately, but postpone the operation until the process calls this
+ * ioctl, allowing the switch to complete.
+ *
+ * According to the X sources this is the behavior:
+ * 0: pending switch-from not OK
+ * 1: pending switch-from OK
+ * 2: completed switch-to OK
+ */
+ case VT_RELDISP:
+ if (!perm)
+ return -EPERM;
+ if (vc->vt_mode.mode != VT_PROCESS)
+ return -EINVAL;
+
+ /*
+ * Switching-from response
+ */
+ if (vc->vt_newvt >= 0) {
+ if (arg == 0)
+ /*
+ * Switch disallowed, so forget we were trying
+ * to do it.
+ */
+ vc->vt_newvt = -1;
+
+ else {
+ /*
+ * The current vt has been released, so
+ * complete the switch.
+ */
+ int newvt;
+ acquire_console_sem();
+ newvt = vc->vt_newvt;
+ vc->vt_newvt = -1;
+ i = vc_allocate(newvt);
+ if (i) {
+ release_console_sem();
+ return i;
+ }
+ /*
+ * When we actually do the console switch,
+ * make sure we are atomic with respect to
+ * other console switches..
+ */
+ complete_change_console(vc_cons[newvt].d);
+ release_console_sem();
+ }
+ }
+
+ /*
+ * Switched-to response
+ */
+ else
+ {
+ /*
+ * If it's just an ACK, ignore it
+ */
+ if (arg != VT_ACKACQ)
+ return -EINVAL;
+ }
+
+ return 0;
+
+ /*
+ * Disallocate memory associated to VT (but leave VT1)
+ */
+ case VT_DISALLOCATE:
+ if (arg > MAX_NR_CONSOLES)
+ return -ENXIO;
+ if (arg == 0) {
+ /* disallocate all unused consoles, but leave 0 */
+ acquire_console_sem();
+ for (i=1; i<MAX_NR_CONSOLES; i++)
+ if (! VT_BUSY(i))
+ vc_disallocate(i);
+ release_console_sem();
+ } else {
+ /* disallocate a single console, if possible */
+ arg--;
+ if (VT_BUSY(arg))
+ return -EBUSY;
+ if (arg) { /* leave 0 */
+ acquire_console_sem();
+ vc_disallocate(arg);
+ release_console_sem();
+ }
+ }
+ return 0;
+
+ case VT_RESIZE:
+ {
+ struct vt_sizes __user *vtsizes = up;
+ ushort ll,cc;
+ if (!perm)
+ return -EPERM;
+ if (get_user(ll, &vtsizes->v_rows) ||
+ get_user(cc, &vtsizes->v_cols))
+ return -EFAULT;
+ for (i = 0; i < MAX_NR_CONSOLES; i++) {
+ acquire_console_sem();
+ vc_resize(vc_cons[i].d, cc, ll);
+ release_console_sem();
+ }
+ return 0;
+ }
+
+ case VT_RESIZEX:
+ {
+ struct vt_consize __user *vtconsize = up;
+ ushort ll,cc,vlin,clin,vcol,ccol;
+ if (!perm)
+ return -EPERM;
+ if (!access_ok(VERIFY_READ, vtconsize,
+ sizeof(struct vt_consize)))
+ return -EFAULT;
+ __get_user(ll, &vtconsize->v_rows);
+ __get_user(cc, &vtconsize->v_cols);
+ __get_user(vlin, &vtconsize->v_vlin);
+ __get_user(clin, &vtconsize->v_clin);
+ __get_user(vcol, &vtconsize->v_vcol);
+ __get_user(ccol, &vtconsize->v_ccol);
+ vlin = vlin ? vlin : vc->vc_scan_lines;
+ if (clin) {
+ if (ll) {
+ if (ll != vlin/clin)
+ return -EINVAL; /* Parameters don't add up */
+ } else
+ ll = vlin/clin;
+ }
+ if (vcol && ccol) {
+ if (cc) {
+ if (cc != vcol/ccol)
+ return -EINVAL;
+ } else
+ cc = vcol/ccol;
+ }
+
+ if (clin > 32)
+ return -EINVAL;
+
+ for (i = 0; i < MAX_NR_CONSOLES; i++) {
+ if (!vc_cons[i].d)
+ continue;
+ acquire_console_sem();
+ if (vlin)
+ vc_cons[i].d->vc_scan_lines = vlin;
+ if (clin)
+ vc_cons[i].d->vc_font.height = clin;
+ vc_resize(vc_cons[i].d, cc, ll);
+ release_console_sem();
+ }
+ return 0;
+ }
+
+ case PIO_FONT: {
+ if (!perm)
+ return -EPERM;
+ op.op = KD_FONT_OP_SET;
+ op.flags = KD_FONT_FLAG_OLD | KD_FONT_FLAG_DONT_RECALC; /* Compatibility */
+ op.width = 8;
+ op.height = 0;
+ op.charcount = 256;
+ op.data = up;
+ return con_font_op(vc_cons[fg_console].d, &op);
+ }
+
+ case GIO_FONT: {
+ op.op = KD_FONT_OP_GET;
+ op.flags = KD_FONT_FLAG_OLD;
+ op.width = 8;
+ op.height = 32;
+ op.charcount = 256;
+ op.data = up;
+ return con_font_op(vc_cons[fg_console].d, &op);
+ }
+
+ case PIO_CMAP:
+ if (!perm)
+ return -EPERM;
+ return con_set_cmap(up);
+
+ case GIO_CMAP:
+ return con_get_cmap(up);
+
+ case PIO_FONTX:
+ case GIO_FONTX:
+ return do_fontx_ioctl(cmd, up, perm, &op);
+
+ case PIO_FONTRESET:
+ {
+ if (!perm)
+ return -EPERM;
+
+#ifdef BROKEN_GRAPHICS_PROGRAMS
+ /* With BROKEN_GRAPHICS_PROGRAMS defined, the default
+ font is not saved. */
+ return -ENOSYS;
+#else
+ {
+ op.op = KD_FONT_OP_SET_DEFAULT;
+ op.data = NULL;
+ i = con_font_op(vc_cons[fg_console].d, &op);
+ if (i)
+ return i;
+ con_set_default_unimap(vc_cons[fg_console].d);
+ return 0;
+ }
+#endif
+ }
+
+ case KDFONTOP: {
+ if (copy_from_user(&op, up, sizeof(op)))
+ return -EFAULT;
+ if (!perm && op.op != KD_FONT_OP_GET)
+ return -EPERM;
+ i = con_font_op(vc, &op);
+ if (i) return i;
+ if (copy_to_user(up, &op, sizeof(op)))
+ return -EFAULT;
+ return 0;
+ }
+
+ case PIO_SCRNMAP:
+ if (!perm)
+ return -EPERM;
+ return con_set_trans_old(up);
+
+ case GIO_SCRNMAP:
+ return con_get_trans_old(up);
+
+ case PIO_UNISCRNMAP:
+ if (!perm)
+ return -EPERM;
+ return con_set_trans_new(up);
+
+ case GIO_UNISCRNMAP:
+ return con_get_trans_new(up);
+
+ case PIO_UNIMAPCLR:
+ { struct unimapinit ui;
+ if (!perm)
+ return -EPERM;
+ i = copy_from_user(&ui, up, sizeof(struct unimapinit));
+ if (i) return -EFAULT;
+ con_clear_unimap(vc, &ui);
+ return 0;
+ }
+
+ case PIO_UNIMAP:
+ case GIO_UNIMAP:
+ return do_unimap_ioctl(cmd, up, perm, vc);
+
+ case VT_LOCKSWITCH:
+ if (!capable(CAP_SYS_TTY_CONFIG))
+ return -EPERM;
+ vt_dont_switch = 1;
+ return 0;
+ case VT_UNLOCKSWITCH:
+ if (!capable(CAP_SYS_TTY_CONFIG))
+ return -EPERM;
+ vt_dont_switch = 0;
+ return 0;
+ default:
+ return -ENOIOCTLCMD;
+ }
+}
+
+/*
+ * Sometimes we want to wait until a particular VT has been activated. We
+ * do it in a very simple manner. Everybody waits on a single queue and
+ * get woken up at once. Those that are satisfied go on with their business,
+ * while those not ready go back to sleep. Seems overkill to add a wait
+ * to each vt just for this - usually this does nothing!
+ */
+static DECLARE_WAIT_QUEUE_HEAD(vt_activate_queue);
+
+/*
+ * Sleeps until a vt is activated, or the task is interrupted. Returns
+ * 0 if activation, -EINTR if interrupted.
+ */
+int vt_waitactive(int vt)
+{
+ int retval;
+ DECLARE_WAITQUEUE(wait, current);
+
+ add_wait_queue(&vt_activate_queue, &wait);
+ for (;;) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ retval = 0;
+ if (vt == fg_console)
+ break;
+ retval = -EINTR;
+ if (signal_pending(current))
+ break;
+ schedule();
+ }
+ remove_wait_queue(&vt_activate_queue, &wait);
+ current->state = TASK_RUNNING;
+ return retval;
+}
+
+#define vt_wake_waitactive() wake_up(&vt_activate_queue)
+
+void reset_vc(struct vc_data *vc)
+{
+ vc->vc_mode = KD_TEXT;
+ kbd_table[vc->vc_num].kbdmode = VC_XLATE;
+ vc->vt_mode.mode = VT_AUTO;
+ vc->vt_mode.waitv = 0;
+ vc->vt_mode.relsig = 0;
+ vc->vt_mode.acqsig = 0;
+ vc->vt_mode.frsig = 0;
+ vc->vt_pid = -1;
+ vc->vt_newvt = -1;
+ if (!in_interrupt()) /* Via keyboard.c:SAK() - akpm */
+ reset_palette(vc);
+}
+
+/*
+ * Performs the back end of a vt switch
+ */
+static void complete_change_console(struct vc_data *vc)
+{
+ unsigned char old_vc_mode;
+
+ last_console = fg_console;
+
+ /*
+ * If we're switching, we could be going from KD_GRAPHICS to
+ * KD_TEXT mode or vice versa, which means we need to blank or
+ * unblank the screen later.
+ */
+ old_vc_mode = vc_cons[fg_console].d->vc_mode;
+ switch_screen(vc);
+
+ /*
+ * This can't appear below a successful kill_proc(). If it did,
+ * then the *blank_screen operation could occur while X, having
+ * received acqsig, is waking up on another processor. This
+ * condition can lead to overlapping accesses to the VGA range
+ * and the framebuffer (causing system lockups).
+ *
+ * To account for this we duplicate this code below only if the
+ * controlling process is gone and we've called reset_vc.
+ */
+ if (old_vc_mode != vc->vc_mode) {
+ if (vc->vc_mode == KD_TEXT)
+ do_unblank_screen(1);
+ else
+ do_blank_screen(1);
+ }
+
+ /*
+ * If this new console is under process control, send it a signal
+ * telling it that it has acquired. Also check if it has died and
+ * clean up (similar to logic employed in change_console())
+ */
+ if (vc->vt_mode.mode == VT_PROCESS) {
+ /*
+ * Send the signal as privileged - kill_proc() will
+ * tell us if the process has gone or something else
+ * is awry
+ */
+ if (kill_proc(vc->vt_pid, vc->vt_mode.acqsig, 1) != 0) {
+ /*
+ * The controlling process has died, so we revert back to
+ * normal operation. In this case, we'll also change back
+ * to KD_TEXT mode. I'm not sure if this is strictly correct
+ * but it saves the agony when the X server dies and the screen
+ * remains blanked due to KD_GRAPHICS! It would be nice to do
+ * this outside of VT_PROCESS but there is no single process
+ * to account for and tracking tty count may be undesirable.
+ */
+ reset_vc(vc);
+
+ if (old_vc_mode != vc->vc_mode) {
+ if (vc->vc_mode == KD_TEXT)
+ do_unblank_screen(1);
+ else
+ do_blank_screen(1);
+ }
+ }
+ }
+
+ /*
+ * Wake anyone waiting for their VT to activate
+ */
+ vt_wake_waitactive();
+ return;
+}
+
+/*
+ * Performs the front-end of a vt switch
+ */
+void change_console(struct vc_data *new_vc)
+{
+ struct vc_data *vc;
+
+ if (!new_vc || new_vc->vc_num == fg_console || vt_dont_switch)
+ return;
+
+ /*
+ * If this vt is in process mode, then we need to handshake with
+ * that process before switching. Essentially, we store where that
+ * vt wants to switch to and wait for it to tell us when it's done
+ * (via VT_RELDISP ioctl).
+ *
+ * We also check to see if the controlling process still exists.
+ * If it doesn't, we reset this vt to auto mode and continue.
+ * This is a cheap way to track process control. The worst thing
+ * that can happen is: we send a signal to a process, it dies, and
+ * the switch gets "lost" waiting for a response; hopefully, the
+ * user will try again, we'll detect the process is gone (unless
+ * the user waits just the right amount of time :-) and revert the
+ * vt to auto control.
+ */
+ vc = vc_cons[fg_console].d;
+ if (vc->vt_mode.mode == VT_PROCESS) {
+ /*
+ * Send the signal as privileged - kill_proc() will
+ * tell us if the process has gone or something else
+ * is awry
+ */
+ if (kill_proc(vc->vt_pid, vc->vt_mode.relsig, 1) == 0) {
+ /*
+ * It worked. Mark the vt to switch to and
+ * return. The process needs to send us a
+ * VT_RELDISP ioctl to complete the switch.
+ */
+ vc->vt_newvt = new_vc->vc_num;
+ return;
+ }
+
+ /*
+ * The controlling process has died, so we revert back to
+ * normal operation. In this case, we'll also change back
+ * to KD_TEXT mode. I'm not sure if this is strictly correct
+ * but it saves the agony when the X server dies and the screen
+ * remains blanked due to KD_GRAPHICS! It would be nice to do
+ * this outside of VT_PROCESS but there is no single process
+ * to account for and tracking tty count may be undesirable.
+ */
+ reset_vc(vc);
+
+ /*
+ * Fall through to normal (VT_AUTO) handling of the switch...
+ */
+ }
+
+ /*
+ * Ignore all switches in KD_GRAPHICS+VT_AUTO mode
+ */
+ if (vc->vc_mode == KD_GRAPHICS)
+ return;
+
+ complete_change_console(new_vc);
+}