Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/alpha/kernel/smc37c93x.c b/arch/alpha/kernel/smc37c93x.c
new file mode 100644
index 0000000..421e51e
--- /dev/null
+++ b/arch/alpha/kernel/smc37c93x.c
@@ -0,0 +1,277 @@
+/*
+ * SMC 37C93X initialization code
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include <asm/hwrpb.h>
+#include <asm/io.h>
+#include <asm/segment.h>
+
+#define SMC_DEBUG 0
+
+#if SMC_DEBUG
+# define DBG_DEVS(args) printk args
+#else
+# define DBG_DEVS(args)
+#endif
+
+#define KB 1024
+#define MB (1024*KB)
+#define GB (1024*MB)
+
+/* device "activate" register contents */
+#define DEVICE_ON 1
+#define DEVICE_OFF 0
+
+/* configuration on/off keys */
+#define CONFIG_ON_KEY 0x55
+#define CONFIG_OFF_KEY 0xaa
+
+/* configuration space device definitions */
+#define FDC 0
+#define IDE1 1
+#define IDE2 2
+#define PARP 3
+#define SER1 4
+#define SER2 5
+#define RTCL 6
+#define KYBD 7
+#define AUXIO 8
+
+/* Chip register offsets from base */
+#define CONFIG_CONTROL 0x02
+#define INDEX_ADDRESS 0x03
+#define LOGICAL_DEVICE_NUMBER 0x07
+#define DEVICE_ID 0x20
+#define DEVICE_REV 0x21
+#define POWER_CONTROL 0x22
+#define POWER_MGMT 0x23
+#define OSC 0x24
+
+#define ACTIVATE 0x30
+#define ADDR_HI 0x60
+#define ADDR_LO 0x61
+#define INTERRUPT_SEL 0x70
+#define INTERRUPT_SEL_2 0x72 /* KYBD/MOUS only */
+#define DMA_CHANNEL_SEL 0x74 /* FDC/PARP only */
+
+#define FDD_MODE_REGISTER 0x90
+#define FDD_OPTION_REGISTER 0x91
+
+/* values that we read back that are expected ... */
+#define VALID_DEVICE_ID 2
+
+/* default device addresses */
+#define KYBD_INTERRUPT 1
+#define MOUS_INTERRUPT 12
+#define COM2_BASE 0x2f8
+#define COM2_INTERRUPT 3
+#define COM1_BASE 0x3f8
+#define COM1_INTERRUPT 4
+#define PARP_BASE 0x3bc
+#define PARP_INTERRUPT 7
+
+static unsigned long __init SMCConfigState(unsigned long baseAddr)
+{
+ unsigned char devId;
+ unsigned char devRev;
+
+ unsigned long configPort;
+ unsigned long indexPort;
+ unsigned long dataPort;
+
+ int i;
+
+ configPort = indexPort = baseAddr;
+ dataPort = configPort + 1;
+
+#define NUM_RETRIES 5
+
+ for (i = 0; i < NUM_RETRIES; i++)
+ {
+ outb(CONFIG_ON_KEY, configPort);
+ outb(CONFIG_ON_KEY, configPort);
+ outb(DEVICE_ID, indexPort);
+ devId = inb(dataPort);
+ if (devId == VALID_DEVICE_ID) {
+ outb(DEVICE_REV, indexPort);
+ devRev = inb(dataPort);
+ break;
+ }
+ else
+ udelay(100);
+ }
+ return (i != NUM_RETRIES) ? baseAddr : 0L;
+}
+
+static void __init SMCRunState(unsigned long baseAddr)
+{
+ outb(CONFIG_OFF_KEY, baseAddr);
+}
+
+static unsigned long __init SMCDetectUltraIO(void)
+{
+ unsigned long baseAddr;
+
+ baseAddr = 0x3F0;
+ if ( ( baseAddr = SMCConfigState( baseAddr ) ) == 0x3F0 ) {
+ return( baseAddr );
+ }
+ baseAddr = 0x370;
+ if ( ( baseAddr = SMCConfigState( baseAddr ) ) == 0x370 ) {
+ return( baseAddr );
+ }
+ return( ( unsigned long )0 );
+}
+
+static void __init SMCEnableDevice(unsigned long baseAddr,
+ unsigned long device,
+ unsigned long portaddr,
+ unsigned long interrupt)
+{
+ unsigned long indexPort;
+ unsigned long dataPort;
+
+ indexPort = baseAddr;
+ dataPort = baseAddr + 1;
+
+ outb(LOGICAL_DEVICE_NUMBER, indexPort);
+ outb(device, dataPort);
+
+ outb(ADDR_LO, indexPort);
+ outb(( portaddr & 0xFF ), dataPort);
+
+ outb(ADDR_HI, indexPort);
+ outb((portaddr >> 8) & 0xFF, dataPort);
+
+ outb(INTERRUPT_SEL, indexPort);
+ outb(interrupt, dataPort);
+
+ outb(ACTIVATE, indexPort);
+ outb(DEVICE_ON, dataPort);
+}
+
+static void __init SMCEnableKYBD(unsigned long baseAddr)
+{
+ unsigned long indexPort;
+ unsigned long dataPort;
+
+ indexPort = baseAddr;
+ dataPort = baseAddr + 1;
+
+ outb(LOGICAL_DEVICE_NUMBER, indexPort);
+ outb(KYBD, dataPort);
+
+ outb(INTERRUPT_SEL, indexPort); /* Primary interrupt select */
+ outb(KYBD_INTERRUPT, dataPort);
+
+ outb(INTERRUPT_SEL_2, indexPort); /* Secondary interrupt select */
+ outb(MOUS_INTERRUPT, dataPort);
+
+ outb(ACTIVATE, indexPort);
+ outb(DEVICE_ON, dataPort);
+}
+
+static void __init SMCEnableFDC(unsigned long baseAddr)
+{
+ unsigned long indexPort;
+ unsigned long dataPort;
+
+ unsigned char oldValue;
+
+ indexPort = baseAddr;
+ dataPort = baseAddr + 1;
+
+ outb(LOGICAL_DEVICE_NUMBER, indexPort);
+ outb(FDC, dataPort);
+
+ outb(FDD_MODE_REGISTER, indexPort);
+ oldValue = inb(dataPort);
+
+ oldValue |= 0x0E; /* Enable burst mode */
+ outb(oldValue, dataPort);
+
+ outb(INTERRUPT_SEL, indexPort); /* Primary interrupt select */
+ outb(0x06, dataPort );
+
+ outb(DMA_CHANNEL_SEL, indexPort); /* DMA channel select */
+ outb(0x02, dataPort);
+
+ outb(ACTIVATE, indexPort);
+ outb(DEVICE_ON, dataPort);
+}
+
+#if SMC_DEBUG
+static void __init SMCReportDeviceStatus(unsigned long baseAddr)
+{
+ unsigned long indexPort;
+ unsigned long dataPort;
+ unsigned char currentControl;
+
+ indexPort = baseAddr;
+ dataPort = baseAddr + 1;
+
+ outb(POWER_CONTROL, indexPort);
+ currentControl = inb(dataPort);
+
+ printk(currentControl & (1 << FDC)
+ ? "\t+FDC Enabled\n" : "\t-FDC Disabled\n");
+ printk(currentControl & (1 << IDE1)
+ ? "\t+IDE1 Enabled\n" : "\t-IDE1 Disabled\n");
+ printk(currentControl & (1 << IDE2)
+ ? "\t+IDE2 Enabled\n" : "\t-IDE2 Disabled\n");
+ printk(currentControl & (1 << PARP)
+ ? "\t+PARP Enabled\n" : "\t-PARP Disabled\n");
+ printk(currentControl & (1 << SER1)
+ ? "\t+SER1 Enabled\n" : "\t-SER1 Disabled\n");
+ printk(currentControl & (1 << SER2)
+ ? "\t+SER2 Enabled\n" : "\t-SER2 Disabled\n");
+
+ printk( "\n" );
+}
+#endif
+
+int __init SMC93x_Init(void)
+{
+ unsigned long SMCUltraBase;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if ((SMCUltraBase = SMCDetectUltraIO()) != 0UL) {
+#if SMC_DEBUG
+ SMCReportDeviceStatus(SMCUltraBase);
+#endif
+ SMCEnableDevice(SMCUltraBase, SER1, COM1_BASE, COM1_INTERRUPT);
+ DBG_DEVS(("SMC FDC37C93X: SER1 done\n"));
+ SMCEnableDevice(SMCUltraBase, SER2, COM2_BASE, COM2_INTERRUPT);
+ DBG_DEVS(("SMC FDC37C93X: SER2 done\n"));
+ SMCEnableDevice(SMCUltraBase, PARP, PARP_BASE, PARP_INTERRUPT);
+ DBG_DEVS(("SMC FDC37C93X: PARP done\n"));
+ /* On PC164, IDE on the SMC is not enabled;
+ CMD646 (PCI) on MB */
+ SMCEnableKYBD(SMCUltraBase);
+ DBG_DEVS(("SMC FDC37C93X: KYB done\n"));
+ SMCEnableFDC(SMCUltraBase);
+ DBG_DEVS(("SMC FDC37C93X: FDC done\n"));
+#if SMC_DEBUG
+ SMCReportDeviceStatus(SMCUltraBase);
+#endif
+ SMCRunState(SMCUltraBase);
+ local_irq_restore(flags);
+ printk("SMC FDC37C93X Ultra I/O Controller found @ 0x%lx\n",
+ SMCUltraBase);
+ return 1;
+ }
+ else {
+ local_irq_restore(flags);
+ DBG_DEVS(("No SMC FDC37C93X Ultra I/O Controller found\n"));
+ return 0;
+ }
+}