Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
diff --git a/MAINTAINERS b/MAINTAINERS
index fb94add..acd124f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -653,6 +653,8 @@
L: openezx-devel@lists.openezx.org (subscribers-only)
W: http://www.openezx.org/
S: Maintained
+T: topgit git://git.openezx.org/openezx.git
+F: arch/arm/mach-pxa/ezx.c
ARM/FARADAY FA526 PORT
P: Paulius Zaleckas
@@ -774,6 +776,13 @@
M: philipp.zabel@gmail.com
S: Maintained
+ARM/MIOA701 MACHINE SUPPORT
+P: Robert Jarzmik
+M: robert.jarzmik@free.fr
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+F: arch/arm/mach-pxa/mioa701.c
+S: Maintained
+
ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT
P: Michael Petchkovsky
M: mkpetch@internode.on.net
@@ -792,6 +801,12 @@
W: http://hackndev.com
S: Maintained
+ARM/PALM TREO 680 SUPPORT
+P: Tomas Cech
+M: sleep_walker@suse.cz
+W: http://hackndev.com
+S: Maintained
+
ARM/PALMZ72 SUPPORT
P: Sergey Lapin
M: slapin@ossfans.org
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index f4533f8..89c992b 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -401,6 +401,16 @@
Say Y here if you intend to run this kernel on Palm Zire 72
handheld computer.
+config MACH_TREO680
+ bool "Palm Treo 680"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA27x
+ select IWMMXT
+ help
+ Say Y here if you intend to run this kernel on Palm Treo 680
+ smartphone.
+
config MACH_PALMLD
bool "Palm LifeDrive"
default y
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index d18ffef..d4c6122 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -62,6 +62,7 @@
obj-$(CONFIG_MACH_PALMTX) += palmtx.o
obj-$(CONFIG_MACH_PALMLD) += palmld.o
obj-$(CONFIG_MACH_PALMZ72) += palmz72.o
+obj-$(CONFIG_MACH_TREO680) += treo680.o
obj-$(CONFIG_ARCH_VIPER) += viper.o
ifeq ($(CONFIG_MACH_ZYLONITE),y)
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 962dda2..5363e1a 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -23,6 +23,7 @@
#include <linux/pm.h>
#include <linux/gpio.h>
#include <linux/backlight.h>
+#include <linux/i2c.h>
#include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
@@ -600,6 +601,10 @@
&sharpsl_rom_device,
};
+static struct i2c_board_info __initdata corgi_i2c_devices[] = {
+ { I2C_BOARD_INFO("wm8731", 0x1b) },
+};
+
static void corgi_poweroff(void)
{
if (!machine_is_corgi())
@@ -634,6 +639,7 @@
pxa_set_mci_info(&corgi_mci_platform_data);
pxa_set_ficp_info(&corgi_ficp_platform_data);
pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(corgi_i2c_devices));
platform_scoop_config = &corgi_pcmcia_config;
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 243e080..63b10d9 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -30,6 +30,7 @@
#include <linux/apm-emulation.h>
#include <linux/i2c.h>
#include <linux/i2c/pca953x.h>
+#include <linux/regulator/userspace-consumer.h>
#include <media/soc_camera.h>
@@ -735,6 +736,7 @@
.rx_threshold = 1,
.tx_threshold = 1,
.timeout = 1000,
+ .gpio_cs = 14,
};
static unsigned long em_x270_libertas_pin_config[] = {
@@ -803,7 +805,6 @@
struct libertas_spi_platform_data em_x270_libertas_pdata = {
.use_dummy_writes = 1,
- .gpio_cs = 14,
.setup = em_x270_libertas_setup,
.teardown = em_x270_libertas_teardown,
};
@@ -838,10 +839,14 @@
static inline void em_x270_init_spi(void) {}
#endif
-#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
+#if defined(CONFIG_SND_PXA2XX_LIB_AC97)
+static pxa2xx_audio_ops_t em_x270_ac97_info = {
+ .reset_gpio = 113,
+};
+
static void __init em_x270_init_ac97(void)
{
- pxa_set_ac97_info(NULL);
+ pxa_set_ac97_info(&em_x270_ac97_info);
}
#else
static inline void em_x270_init_ac97(void) {}
@@ -1038,6 +1043,52 @@
static inline void em_x270_init_camera(void) {}
#endif
+static struct regulator_bulk_data em_x270_gps_consumer_supply = {
+ .supply = "vcc gps",
+};
+
+static struct regulator_userspace_consumer_data em_x270_gps_consumer_data = {
+ .name = "vcc gps",
+ .num_supplies = 1,
+ .supplies = &em_x270_gps_consumer_supply,
+};
+
+static struct platform_device em_x270_gps_userspace_consumer = {
+ .name = "reg-userspace-consumer",
+ .id = 0,
+ .dev = {
+ .platform_data = &em_x270_gps_consumer_data,
+ },
+};
+
+static struct regulator_bulk_data em_x270_gprs_consumer_supply = {
+ .supply = "vcc gprs",
+};
+
+static struct regulator_userspace_consumer_data em_x270_gprs_consumer_data = {
+ .name = "vcc gprs",
+ .num_supplies = 1,
+ .supplies = &em_x270_gprs_consumer_supply
+};
+
+static struct platform_device em_x270_gprs_userspace_consumer = {
+ .name = "reg-userspace-consumer",
+ .id = 1,
+ .dev = {
+ .platform_data = &em_x270_gprs_consumer_data,
+ }
+};
+
+static struct platform_device *em_x270_userspace_consumers[] = {
+ &em_x270_gps_userspace_consumer,
+ &em_x270_gprs_userspace_consumer,
+};
+
+static void __init em_x270_userspace_consumers_init(void)
+{
+ platform_add_devices(ARRAY_AND_SIZE(em_x270_userspace_consumers));
+}
+
/* DA9030 related initializations */
#define REGULATOR_CONSUMER(_name, _dev, _supply) \
static struct regulator_consumer_supply _name##_consumers[] = { \
@@ -1047,11 +1098,11 @@
}, \
}
-REGULATOR_CONSUMER(ldo3, NULL, "vcc gps");
+REGULATOR_CONSUMER(ldo3, &em_x270_gps_userspace_consumer.dev, "vcc gps");
REGULATOR_CONSUMER(ldo5, NULL, "vcc cam");
REGULATOR_CONSUMER(ldo10, &pxa_device_mci.dev, "vcc sdio");
REGULATOR_CONSUMER(ldo12, NULL, "vcc usb");
-REGULATOR_CONSUMER(ldo19, NULL, "vcc gprs");
+REGULATOR_CONSUMER(ldo19, &em_x270_gprs_userspace_consumer.dev, "vcc gprs");
#define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask) \
static struct regulator_init_data _ldo##_data = { \
@@ -1062,6 +1113,7 @@
.enabled = 0, \
}, \
.valid_ops_mask = _ops_mask, \
+ .apply_uV = 1, \
}, \
.num_consumer_supplies = ARRAY_SIZE(_ldo##_consumers), \
.consumer_supplies = _ldo##_consumers, \
@@ -1240,6 +1292,7 @@
em_x270_init_spi();
em_x270_init_i2c();
em_x270_init_camera();
+ em_x270_userspace_consumers_init();
}
MACHINE_START(EM_X270, "Compulab EM-X270")
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 7fff467..81359d5 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -30,6 +30,7 @@
#include <linux/pwm_backlight.h>
#include <linux/regulator/bq24022.h>
#include <linux/regulator/machine.h>
+#include <linux/regulator/max1586.h>
#include <linux/spi/ads7846.h>
#include <linux/spi/spi.h>
#include <linux/usb/gpio_vbus.h>
@@ -775,6 +776,45 @@
};
/*
+ * Maxim MAX1587A on PI2C
+ */
+
+static struct regulator_consumer_supply max1587a_consumer = {
+ .supply = "vcc_core",
+};
+
+static struct regulator_init_data max1587a_v3_info = {
+ .constraints = {
+ .name = "vcc_core range",
+ .min_uV = 900000,
+ .max_uV = 1705000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &max1587a_consumer,
+};
+
+static struct max1586_subdev_data max1587a_subdev = {
+ .name = "vcc_core",
+ .id = MAX1586_V3,
+ .platform_data = &max1587a_v3_info,
+};
+
+static struct max1586_platform_data max1587a_info = {
+ .num_subdevs = 1,
+ .subdevs = &max1587a_subdev,
+ .v3_gain = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
+};
+
+static struct i2c_board_info __initdata pi2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("max1586", 0x14),
+ .platform_data = &max1587a_info,
+ },
+};
+
+/*
* PCMCIA
*/
@@ -828,6 +868,7 @@
pxa_set_ficp_info(&ficp_info);
pxa27x_set_i2c_power_info(NULL);
pxa_set_i2c_info(NULL);
+ i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info));
pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/include/mach/palmz72.h
index 5032307..2806ef6 100644
--- a/arch/arm/mach-pxa/include/mach/palmz72.h
+++ b/arch/arm/mach-pxa/include/mach/palmz72.h
@@ -21,7 +21,7 @@
/* SD/MMC */
#define GPIO_NR_PALMZ72_SD_DETECT_N 14
#define GPIO_NR_PALMZ72_SD_POWER_N 98
-#define GPIO_NR_PALMZ72_SD_RO 115
+#define GPIO_NR_PALMZ72_SD_RO 115
/* Touchscreen */
#define GPIO_NR_PALMZ72_WM9712_IRQ 27
@@ -31,8 +31,7 @@
/* USB */
#define GPIO_NR_PALMZ72_USB_DETECT_N 15
-#define GPIO_NR_PALMZ72_USB_POWER 95
-#define GPIO_NR_PALMZ72_USB_PULLUP 12
+#define GPIO_NR_PALMZ72_USB_PULLUP 95
/* LCD/Backlight */
#define GPIO_NR_PALMZ72_BL_POWER 20
diff --git a/arch/arm/mach-pxa/include/mach/treo680.h b/arch/arm/mach-pxa/include/mach/treo680.h
new file mode 100644
index 0000000..af443b2
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/treo680.h
@@ -0,0 +1,49 @@
+/*
+ * GPIOs and interrupts for Palm Treo 680 smartphone
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_TREO680_H_
+#define _INCLUDE_TREO680_H_
+
+/* GPIOs */
+#define GPIO_NR_TREO680_POWER_DETECT 0
+#define GPIO_NR_TREO680_AMP_EN 27
+#define GPIO_NR_TREO680_KEYB_BL 24
+#define GPIO_NR_TREO680_VIBRATE_EN 44
+#define GPIO_NR_TREO680_GREEN_LED 20
+#define GPIO_NR_TREO680_RED_LED 79
+#define GPIO_NR_TREO680_SD_DETECT_N 113
+#define GPIO_NR_TREO680_SD_READONLY 33
+#define GPIO_NR_TREO680_EP_DETECT_N 116
+#define GPIO_NR_TREO680_SD_POWER 42
+#define GPIO_NR_TREO680_USB_DETECT 1
+#define GPIO_NR_TREO680_USB_PULLUP 114
+#define GPIO_NR_TREO680_GSM_POWER 40
+#define GPIO_NR_TREO680_GSM_RESET 87
+#define GPIO_NR_TREO680_GSM_WAKE 57
+#define GPIO_NR_TREO680_GSM_HOST_WAKE 14
+#define GPIO_NR_TREO680_GSM_TRIGGER 10
+#define GPIO_NR_TREO680_BT_EN 43
+#define GPIO_NR_TREO680_IR_EN 115
+#define GPIO_NR_TREO680_IR_TXD 47
+#define GPIO_NR_TREO680_BL_POWER 38
+#define GPIO_NR_TREO680_LCD_POWER 25
+
+/* Various addresses */
+#define TREO680_PHYS_RAM_START 0xa0000000
+#define TREO680_PHYS_IO_START 0x40000000
+#define TREO680_STR_BASE 0xa2000000
+
+/* BACKLIGHT */
+#define TREO680_MAX_INTENSITY 254
+#define TREO680_DEFAULT_INTENSITY 160
+#define TREO680_LIMIT_MASK 0x7F
+#define TREO680_PRESCALER 63
+#define TREO680_PERIOD_NS 3500
+
+#endif
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 4dc8c2e..2d28132 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -37,6 +37,7 @@
#include <linux/wm97xx_batt.h>
#include <linux/mtd/physmap.h>
#include <linux/usb/gpio_vbus.h>
+#include <linux/regulator/max1586.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -717,6 +718,38 @@
};
/*
+ * Voltage regulation
+ */
+static struct regulator_consumer_supply max1586_consumers[] = {
+ {
+ .supply = "vcc_core",
+ }
+};
+
+static struct regulator_init_data max1586_v3_info = {
+ .constraints = {
+ .name = "vcc_core range",
+ .min_uV = 1000000,
+ .max_uV = 1705000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max1586_consumers),
+ .consumer_supplies = max1586_consumers,
+};
+
+static struct max1586_subdev_data max1586_subdevs[] = {
+ { .name = "vcc_core", .id = MAX1586_V3,
+ .platform_data = &max1586_v3_info },
+};
+
+static struct max1586_platform_data max1586_info = {
+ .subdevs = max1586_subdevs,
+ .num_subdevs = ARRAY_SIZE(max1586_subdevs),
+ .v3_gain = MAX1586_GAIN_NO_R24, /* 700..1475 mV */
+};
+
+/*
* Camera interface
*/
struct pxacamera_platform_data mioa701_pxacamera_platform_data = {
@@ -725,6 +758,13 @@
.mclk_10khz = 5000,
};
+static struct i2c_board_info __initdata mioa701_pi2c_devices[] = {
+ {
+ I2C_BOARD_INFO("max1586", 0x14),
+ .platform_data = &max1586_info,
+ },
+};
+
static struct soc_camera_link iclink = {
.bus_id = 0, /* Must match id in pxa27x_device_camera in device.c */
};
@@ -825,7 +865,9 @@
platform_add_devices(devices, ARRAY_SIZE(devices));
gsm_init();
+ i2c_register_board_info(1, ARRAY_AND_SIZE(mioa701_pi2c_devices));
pxa_set_i2c_info(&i2c_pdata);
+ pxa27x_set_i2c_power_info(NULL);
pxa_set_camera_info(&mioa701_pxacamera_platform_data);
i2c_register_board_info(0, ARRAY_AND_SIZE(mioa701_i2c_devices));
}
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index b88eb4d..c3645aa 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -27,7 +27,9 @@
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
+#include <linux/wm97xx_batt.h>
#include <linux/power_supply.h>
+#include <linux/usb/gpio_vbus.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -41,6 +43,8 @@
#include <mach/irda.h>
#include <mach/pxa27x_keypad.h>
#include <mach/udc.h>
+#include <mach/palmasoc.h>
+
#include <mach/pm.h>
#include "generic.h"
@@ -66,6 +70,8 @@
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
+ GPIO89_AC97_SYSCLK,
+ GPIO113_AC97_nRESET,
/* IrDA */
GPIO49_GPIO, /* ir disable */
@@ -77,8 +83,7 @@
/* USB */
GPIO15_GPIO, /* usb detect */
- GPIO12_GPIO, /* usb pullup */
- GPIO95_GPIO, /* usb power */
+ GPIO95_GPIO, /* usb pullup */
/* Matrix keypad */
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
@@ -355,6 +360,22 @@
};
/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static struct gpio_vbus_mach_info palmz72_udc_info = {
+ .gpio_vbus = GPIO_NR_PALMZ72_USB_DETECT_N,
+ .gpio_pullup = GPIO_NR_PALMZ72_USB_PULLUP,
+};
+
+static struct platform_device palmz72_gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmz72_udc_info,
+ },
+};
+
+/******************************************************************************
* Power supply
******************************************************************************/
static int power_supply_init(struct device *dev)
@@ -422,6 +443,31 @@
};
/******************************************************************************
+ * WM97xx battery
+ ******************************************************************************/
+static struct wm97xx_batt_info wm97xx_batt_pdata = {
+ .batt_aux = WM97XX_AUX_ID3,
+ .temp_aux = WM97XX_AUX_ID2,
+ .charge_gpio = -1,
+ .max_voltage = PALMZ72_BAT_MAX_VOLTAGE,
+ .min_voltage = PALMZ72_BAT_MIN_VOLTAGE,
+ .batt_mult = 1000,
+ .batt_div = 414,
+ .temp_mult = 1,
+ .temp_div = 1,
+ .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .batt_name = "main-batt",
+};
+
+/******************************************************************************
+ * aSoC audio
+ ******************************************************************************/
+static struct platform_device palmz72_asoc = {
+ .name = "palm27x-asoc",
+ .id = -1,
+};
+
+/******************************************************************************
* Framebuffer
******************************************************************************/
static struct pxafb_mode_info palmz72_lcd_modes[] = {
@@ -527,17 +573,32 @@
static struct platform_device *devices[] __initdata = {
&palmz72_backlight,
&palmz72_leds,
+ &palmz72_asoc,
&power_supply,
+ &palmz72_gpio_vbus,
};
+/* setup udc GPIOs initial state */
+static void __init palmz72_udc_init(void)
+{
+ if (!gpio_request(GPIO_NR_PALMZ72_USB_PULLUP, "USB Pullup")) {
+ gpio_direction_output(GPIO_NR_PALMZ72_USB_PULLUP, 0);
+ gpio_free(GPIO_NR_PALMZ72_USB_PULLUP);
+ }
+}
+
static void __init palmz72_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config));
+
set_pxa_fb_info(&palmz72_lcd_screen);
pxa_set_mci_info(&palmz72_mci_platform_data);
+ palmz72_udc_init();
pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&palmz72_ficp_platform_data);
pxa_set_keypad_info(&palmz72_keypad_platform_data);
+ wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
+
platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index ac431ed..9352d4a 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -22,6 +22,7 @@
#include <linux/delay.h>
#include <linux/mtd/physmap.h>
#include <linux/gpio.h>
+#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/mtd/sharpsl.h>
@@ -486,6 +487,10 @@
&sharpsl_rom_device,
};
+static struct i2c_board_info __initdata poodle_i2c_devices[] = {
+ { I2C_BOARD_INFO("wm8731", 0x1b) },
+};
+
static void poodle_poweroff(void)
{
arm_machine_restart('h', NULL);
@@ -519,6 +524,7 @@
pxa_set_mci_info(&poodle_mci_platform_data);
pxa_set_ficp_info(&poodle_ficp_platform_data);
pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(poodle_i2c_devices));
poodle_init_spi();
}
diff --git a/arch/arm/mach-pxa/treo680.c b/arch/arm/mach-pxa/treo680.c
new file mode 100644
index 0000000..a06f19e
--- /dev/null
+++ b/arch/arm/mach-pxa/treo680.c
@@ -0,0 +1,612 @@
+/*
+ * Hardware definitions for Palm Treo 680
+ *
+ * Author: Tomas Cech <sleep_walker@suse.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx_batt.h>
+#include <linux/power_supply.h>
+#include <linux/sysdev.h>
+#include <linux/w1-gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/pxa27x.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/audio.h>
+#include <mach/treo680.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/irda.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/udc.h>
+#include <mach/ohci.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/palmasoc.h>
+#include <mach/camera.h>
+
+#include <sound/pxa2xx-lib.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long treo680_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO33_GPIO, /* SD read only */
+ GPIO113_GPIO, /* SD detect */
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO89_AC97_SYSCLK,
+ GPIO95_AC97_nRESET,
+
+ /* IrDA */
+ GPIO46_FICP_RXD,
+ GPIO47_FICP_TXD,
+
+ /* PWM */
+ GPIO16_PWM0_OUT,
+
+ /* USB */
+ GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, /* usb detect */
+
+ /* MATRIX KEYPAD */
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO101_KP_MKIN_1,
+ GPIO102_KP_MKIN_2,
+ GPIO97_KP_MKIN_3,
+ GPIO98_KP_MKIN_4,
+ GPIO99_KP_MKIN_5,
+ GPIO91_KP_MKIN_6,
+ GPIO13_KP_MKIN_7,
+ GPIO103_KP_MKOUT_0 | MFP_LPM_DRIVE_HIGH,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+ GPIO106_KP_MKOUT_3,
+ GPIO107_KP_MKOUT_4,
+ GPIO108_KP_MKOUT_5,
+ GPIO96_KP_MKOUT_6,
+ GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH, /* Hotsync button */
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+
+ /* Quick Capture Interface */
+ GPIO84_CIF_FV,
+ GPIO85_CIF_LV,
+ GPIO53_CIF_MCLK,
+ GPIO54_CIF_PCLK,
+ GPIO81_CIF_DD_0,
+ GPIO55_CIF_DD_1,
+ GPIO51_CIF_DD_2,
+ GPIO50_CIF_DD_3,
+ GPIO52_CIF_DD_4,
+ GPIO48_CIF_DD_5,
+ GPIO17_CIF_DD_6,
+ GPIO12_CIF_DD_7,
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* GSM */
+ GPIO14_GPIO | WAKEUP_ON_EDGE_BOTH, /* GSM host wake up */
+ GPIO34_FFUART_RXD,
+ GPIO35_FFUART_CTS,
+ GPIO39_FFUART_TXD,
+ GPIO41_FFUART_RTS,
+
+ /* MISC. */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, /* external power detect */
+ GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH, /* silent switch */
+ GPIO116_GPIO, /* headphone detect */
+ GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH, /* bluetooth host wake up */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int treo680_mci_init(struct device *dev,
+ irq_handler_t treo680_detect_int, void *data)
+{
+ int err = 0;
+
+ /* Setup an interrupt for detecting card insert/remove events */
+ err = gpio_request(GPIO_NR_TREO680_SD_DETECT_N, "SD IRQ");
+
+ if (err)
+ goto err;
+
+ err = gpio_direction_input(GPIO_NR_TREO680_SD_DETECT_N);
+ if (err)
+ goto err2;
+
+ err = request_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N),
+ treo680_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "SD/MMC card detect", data);
+
+ if (err) {
+ dev_err(dev, "%s: cannot request SD/MMC card detect IRQ\n",
+ __func__);
+ goto err2;
+ }
+
+ err = gpio_request(GPIO_NR_TREO680_SD_POWER, "SD_POWER");
+ if (err)
+ goto err3;
+
+ err = gpio_direction_output(GPIO_NR_TREO680_SD_POWER, 1);
+ if (err)
+ goto err4;
+
+ err = gpio_request(GPIO_NR_TREO680_SD_READONLY, "SD_READONLY");
+ if (err)
+ goto err4;
+
+ err = gpio_direction_input(GPIO_NR_TREO680_SD_READONLY);
+ if (err)
+ goto err5;
+
+ return 0;
+
+err5:
+ gpio_free(GPIO_NR_TREO680_SD_READONLY);
+err4:
+ gpio_free(GPIO_NR_TREO680_SD_POWER);
+err3:
+ free_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N), data);
+err2:
+ gpio_free(GPIO_NR_TREO680_SD_DETECT_N);
+err:
+ return err;
+}
+
+static void treo680_mci_exit(struct device *dev, void *data)
+{
+ gpio_free(GPIO_NR_TREO680_SD_READONLY);
+ gpio_free(GPIO_NR_TREO680_SD_POWER);
+ free_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N), data);
+ gpio_free(GPIO_NR_TREO680_SD_DETECT_N);
+}
+
+static void treo680_mci_power(struct device *dev, unsigned int vdd)
+{
+ struct pxamci_platform_data *p_d = dev->platform_data;
+ gpio_set_value(GPIO_NR_TREO680_SD_POWER, p_d->ocr_mask & (1 << vdd));
+}
+
+static int treo680_mci_get_ro(struct device *dev)
+{
+ return gpio_get_value(GPIO_NR_TREO680_SD_READONLY);
+}
+
+static struct pxamci_platform_data treo680_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .setpower = treo680_mci_power,
+ .get_ro = treo680_mci_get_ro,
+ .init = treo680_mci_init,
+ .exit = treo680_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+static unsigned int treo680_matrix_keys[] = {
+ KEY(0, 0, KEY_F8), /* Red/Off/Power */
+ KEY(0, 1, KEY_LEFT),
+ KEY(0, 2, KEY_LEFTCTRL), /* Alternate */
+ KEY(0, 3, KEY_L),
+ KEY(0, 4, KEY_A),
+ KEY(0, 5, KEY_Q),
+ KEY(0, 6, KEY_P),
+
+ KEY(1, 0, KEY_RIGHTCTRL), /* Menu */
+ KEY(1, 1, KEY_RIGHT),
+ KEY(1, 2, KEY_LEFTSHIFT), /* Left shift */
+ KEY(1, 3, KEY_Z),
+ KEY(1, 4, KEY_S),
+ KEY(1, 5, KEY_W),
+
+ KEY(2, 0, KEY_F1), /* Phone */
+ KEY(2, 1, KEY_UP),
+ KEY(2, 2, KEY_0),
+ KEY(2, 3, KEY_X),
+ KEY(2, 4, KEY_D),
+ KEY(2, 5, KEY_E),
+
+ KEY(3, 0, KEY_F10), /* Calendar */
+ KEY(3, 1, KEY_DOWN),
+ KEY(3, 2, KEY_SPACE),
+ KEY(3, 3, KEY_C),
+ KEY(3, 4, KEY_F),
+ KEY(3, 5, KEY_R),
+
+ KEY(4, 0, KEY_F12), /* Mail */
+ KEY(4, 1, KEY_KPENTER),
+ KEY(4, 2, KEY_RIGHTALT), /* Alt */
+ KEY(4, 3, KEY_V),
+ KEY(4, 4, KEY_G),
+ KEY(4, 5, KEY_T),
+
+ KEY(5, 0, KEY_F9), /* Home */
+ KEY(5, 1, KEY_PAGEUP), /* Side up */
+ KEY(5, 2, KEY_DOT),
+ KEY(5, 3, KEY_B),
+ KEY(5, 4, KEY_H),
+ KEY(5, 5, KEY_Y),
+
+ KEY(6, 0, KEY_TAB), /* Side Activate */
+ KEY(6, 1, KEY_PAGEDOWN), /* Side down */
+ KEY(6, 2, KEY_ENTER),
+ KEY(6, 3, KEY_N),
+ KEY(6, 4, KEY_J),
+ KEY(6, 5, KEY_U),
+
+ KEY(7, 0, KEY_F6), /* Green/Call */
+ KEY(7, 1, KEY_O),
+ KEY(7, 2, KEY_BACKSPACE),
+ KEY(7, 3, KEY_M),
+ KEY(7, 4, KEY_K),
+ KEY(7, 5, KEY_I),
+};
+
+static struct pxa27x_keypad_platform_data treo680_keypad_platform_data = {
+ .matrix_key_rows = 8,
+ .matrix_key_cols = 7,
+ .matrix_key_map = treo680_matrix_keys,
+ .matrix_key_map_size = ARRAY_SIZE(treo680_matrix_keys),
+ .direct_key_map = { KEY_CONNECT },
+ .direct_key_num = 1,
+
+ .debounce_interval = 30,
+};
+
+/******************************************************************************
+ * aSoC audio
+ ******************************************************************************/
+
+static pxa2xx_audio_ops_t treo680_ac97_pdata = {
+ .reset_gpio = 95,
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int treo680_backlight_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_TREO680_BL_POWER, "BL POWER");
+ if (ret)
+ goto err;
+ ret = gpio_direction_output(GPIO_NR_TREO680_BL_POWER, 0);
+ if (ret)
+ goto err2;
+ ret = gpio_request(GPIO_NR_TREO680_LCD_POWER, "LCD POWER");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_output(GPIO_NR_TREO680_LCD_POWER, 0);
+ if (ret)
+ goto err3;
+
+ return 0;
+err3:
+ gpio_free(GPIO_NR_TREO680_LCD_POWER);
+err2:
+ gpio_free(GPIO_NR_TREO680_BL_POWER);
+err:
+ return ret;
+}
+
+static int treo680_backlight_notify(int brightness)
+{
+ gpio_set_value(GPIO_NR_TREO680_BL_POWER, brightness);
+ return TREO680_MAX_INTENSITY - brightness;
+};
+
+static void treo680_backlight_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_TREO680_BL_POWER);
+ gpio_free(GPIO_NR_TREO680_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data treo680_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = TREO680_MAX_INTENSITY,
+ .dft_brightness = TREO680_DEFAULT_INTENSITY,
+ .pwm_period_ns = TREO680_PERIOD_NS,
+ .init = treo680_backlight_init,
+ .notify = treo680_backlight_notify,
+ .exit = treo680_backlight_exit,
+};
+
+static struct platform_device treo680_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &treo680_backlight_data,
+ },
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static void treo680_transceiver_mode(struct device *dev, int mode)
+{
+ gpio_set_value(GPIO_NR_TREO680_IR_EN, mode & IR_OFF);
+ pxa2xx_transceiver_mode(dev, mode);
+}
+
+static int treo680_irda_startup(struct device *dev)
+{
+ int err;
+
+ err = gpio_request(GPIO_NR_TREO680_IR_EN, "Ir port disable");
+ if (err)
+ goto err1;
+
+ err = gpio_direction_output(GPIO_NR_TREO680_IR_EN, 1);
+ if (err)
+ goto err2;
+
+ return 0;
+
+err2:
+ dev_err(dev, "treo680_irda: cannot change IR gpio direction\n");
+ gpio_free(GPIO_NR_TREO680_IR_EN);
+err1:
+ dev_err(dev, "treo680_irda: cannot allocate IR gpio\n");
+ return err;
+}
+
+static void treo680_irda_shutdown(struct device *dev)
+{
+ gpio_free(GPIO_NR_TREO680_AMP_EN);
+}
+
+static struct pxaficp_platform_data treo680_ficp_info = {
+ .transceiver_cap = IR_FIRMODE | IR_SIRMODE | IR_OFF,
+ .startup = treo680_irda_startup,
+ .shutdown = treo680_irda_shutdown,
+ .transceiver_mode = treo680_transceiver_mode,
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static struct pxa2xx_udc_mach_info treo680_udc_info __initdata = {
+ .gpio_vbus = GPIO_NR_TREO680_USB_DETECT,
+ .gpio_vbus_inverted = 1,
+ .gpio_pullup = GPIO_NR_TREO680_USB_PULLUP,
+};
+
+
+/******************************************************************************
+ * USB host
+ ******************************************************************************/
+static struct pxaohci_platform_data treo680_ohci_info = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT1 | ENABLE_PORT3,
+ .power_budget = 0,
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_TREO680_POWER_DETECT, "CABLE_STATE_AC");
+ if (ret)
+ goto err1;
+ ret = gpio_direction_input(GPIO_NR_TREO680_POWER_DETECT);
+ if (ret)
+ goto err2;
+
+ return 0;
+
+err2:
+ gpio_free(GPIO_NR_TREO680_POWER_DETECT);
+err1:
+ return ret;
+}
+
+static int treo680_is_ac_online(void)
+{
+ return gpio_get_value(GPIO_NR_TREO680_POWER_DETECT);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_TREO680_POWER_DETECT);
+}
+
+static char *treo680_supplicants[] = {
+ "main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+ .init = power_supply_init,
+ .is_ac_online = treo680_is_ac_online,
+ .exit = power_supply_exit,
+ .supplied_to = treo680_supplicants,
+ .num_supplicants = ARRAY_SIZE(treo680_supplicants),
+};
+
+static struct platform_device power_supply = {
+ .name = "pda-power",
+ .id = -1,
+ .dev = {
+ .platform_data = &power_supply_info,
+ },
+};
+
+/******************************************************************************
+ * Vibra and LEDs
+ ******************************************************************************/
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "treo680:vibra:vibra",
+ .default_trigger = "none",
+ .gpio = GPIO_NR_TREO680_VIBRATE_EN,
+ },
+ {
+ .name = "treo680:green:led",
+ .default_trigger = "mmc0",
+ .gpio = GPIO_NR_TREO680_GREEN_LED,
+ },
+ {
+ .name = "treo680:keybbl:keybbl",
+ .default_trigger = "none",
+ .gpio = GPIO_NR_TREO680_KEYB_BL,
+ },
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device treo680_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_led_info,
+ }
+};
+
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+/* TODO: add support for 324x324 */
+static struct pxafb_mode_info treo680_lcd_modes[] = {
+{
+ .pixclock = 86538,
+ .xres = 320,
+ .yres = 320,
+ .bpp = 16,
+
+ .left_margin = 20,
+ .right_margin = 8,
+ .upper_margin = 8,
+ .lower_margin = 5,
+
+ .hsync_len = 4,
+ .vsync_len = 1,
+},
+};
+
+static struct pxafb_mach_info treo680_lcd_screen = {
+ .modes = treo680_lcd_modes,
+ .num_modes = ARRAY_SIZE(treo680_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Power management - standby
+ ******************************************************************************/
+static void __init treo680_pm_init(void)
+{
+ static u32 resume[] = {
+ 0xe3a00101, /* mov r0, #0x40000000 */
+ 0xe380060f, /* orr r0, r0, #0x00f00000 */
+ 0xe590f008, /* ldr pc, [r0, #0x08] */
+ };
+
+ /* this is where the bootloader jumps */
+ memcpy(phys_to_virt(TREO680_STR_BASE), resume, sizeof(resume));
+}
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+ &treo680_backlight,
+ &treo680_leds,
+ &power_supply,
+};
+
+/* setup udc GPIOs initial state */
+static void __init treo680_udc_init(void)
+{
+ if (!gpio_request(GPIO_NR_TREO680_USB_PULLUP, "UDC Vbus")) {
+ gpio_direction_output(GPIO_NR_TREO680_USB_PULLUP, 1);
+ gpio_free(GPIO_NR_TREO680_USB_PULLUP);
+ }
+}
+
+static void __init treo680_init(void)
+{
+ treo680_pm_init();
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
+ pxa_set_keypad_info(&treo680_keypad_platform_data);
+ set_pxa_fb_info(&treo680_lcd_screen);
+ pxa_set_mci_info(&treo680_mci_platform_data);
+ treo680_udc_init();
+ pxa_set_udc_info(&treo680_udc_info);
+ pxa_set_ac97_info(&treo680_ac97_pdata);
+ pxa_set_ficp_info(&treo680_ficp_info);
+ pxa_set_ohci_info(&treo680_ohci_info);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(TREO680, "Palm Treo 680")
+ .phys_io = TREO680_PHYS_IO_START,
+ .io_pg_offst = io_p2v(0x40000000),
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = treo680_init,
+MACHINE_END
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index fdaa9bb..4722582 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -836,6 +836,13 @@
BOOTMEM_EXCLUSIVE);
}
+ if (machine_is_treo680()) {
+ reserve_bootmem_node(pgdat, 0xa0000000, 0x1000,
+ BOOTMEM_EXCLUSIVE);
+ reserve_bootmem_node(pgdat, 0xa2000000, 0x1000,
+ BOOTMEM_EXCLUSIVE);
+ }
+
if (machine_is_palmt5())
reserve_bootmem_node(pgdat, 0xa0200000, 0x1000,
BOOTMEM_EXCLUSIVE);
diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c
index d5be2b3..fefe1a5 100644
--- a/sound/soc/pxa/corgi.c
+++ b/sound/soc/pxa/corgi.c
@@ -320,38 +320,6 @@
.codec_dev = &soc_codec_dev_wm8731,
};
-/*
- * FIXME: This is a temporary bodge to avoid cross-tree merge issues.
- * New drivers should register the wm8731 I2C device in the machine
- * setup code (under arch/arm for ARM systems).
- */
-static int wm8731_i2c_register(void)
-{
- struct i2c_board_info info;
- struct i2c_adapter *adapter;
- struct i2c_client *client;
-
- memset(&info, 0, sizeof(struct i2c_board_info));
- info.addr = 0x1b;
- strlcpy(info.type, "wm8731", I2C_NAME_SIZE);
-
- adapter = i2c_get_adapter(0);
- if (!adapter) {
- printk(KERN_ERR "can't get i2c adapter 0\n");
- return -ENODEV;
- }
-
- client = i2c_new_device(adapter, &info);
- i2c_put_adapter(adapter);
- if (!client) {
- printk(KERN_ERR "can't add i2c device at 0x%x\n",
- (unsigned int)info.addr);
- return -ENODEV;
- }
-
- return 0;
-}
-
static struct platform_device *corgi_snd_device;
static int __init corgi_init(void)
@@ -362,10 +330,6 @@
machine_is_husky()))
return -ENODEV;
- ret = wm8731_i2c_register();
- if (ret != 0)
- return ret;
-
corgi_snd_device = platform_device_alloc("soc-audio", -1);
if (!corgi_snd_device)
return -ENOMEM;
diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c
index a51058f..c5f36e0 100644
--- a/sound/soc/pxa/poodle.c
+++ b/sound/soc/pxa/poodle.c
@@ -280,38 +280,6 @@
.num_links = 1,
};
-/*
- * FIXME: This is a temporary bodge to avoid cross-tree merge issues.
- * New drivers should register the wm8731 I2C device in the machine
- * setup code (under arch/arm for ARM systems).
- */
-static int wm8731_i2c_register(void)
-{
- struct i2c_board_info info;
- struct i2c_adapter *adapter;
- struct i2c_client *client;
-
- memset(&info, 0, sizeof(struct i2c_board_info));
- info.addr = 0x1b;
- strlcpy(info.type, "wm8731", I2C_NAME_SIZE);
-
- adapter = i2c_get_adapter(0);
- if (!adapter) {
- printk(KERN_ERR "can't get i2c adapter 0\n");
- return -ENODEV;
- }
-
- client = i2c_new_device(adapter, &info);
- i2c_put_adapter(adapter);
- if (!client) {
- printk(KERN_ERR "can't add i2c device at 0x%x\n",
- (unsigned int)info.addr);
- return -ENODEV;
- }
-
- return 0;
-}
-
/* poodle audio subsystem */
static struct snd_soc_device poodle_snd_devdata = {
.card = &snd_soc_poodle,
@@ -327,10 +295,6 @@
if (!machine_is_poodle())
return -ENODEV;
- ret = wm8731_i2c_register();
- if (ret != 0)
- return ret;
-
locomo_gpio_set_dir(&poodle_locomo_device.dev,
POODLE_LOCOMO_GPIO_AMP_ON, 0);
/* should we mute HP at startup - burning power ?*/