| /* |
| * linux/drivers/clocksource/timer-sp.c |
| * |
| * Copyright (C) 1999 - 2003 ARM Limited |
| * Copyright (C) 2000 Deep Blue Solutions Ltd |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| #include <linux/clk.h> |
| #include <linux/clocksource.h> |
| #include <linux/clockchips.h> |
| #include <linux/err.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/io.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include <linux/sched_clock.h> |
| |
| #include <clocksource/timer-sp804.h> |
| |
| #include "timer-sp.h" |
| |
| static long __init sp804_get_clock_rate(struct clk *clk) |
| { |
| long rate; |
| int err; |
| |
| err = clk_prepare(clk); |
| if (err) { |
| pr_err("sp804: clock failed to prepare: %d\n", err); |
| clk_put(clk); |
| return err; |
| } |
| |
| err = clk_enable(clk); |
| if (err) { |
| pr_err("sp804: clock failed to enable: %d\n", err); |
| clk_unprepare(clk); |
| clk_put(clk); |
| return err; |
| } |
| |
| rate = clk_get_rate(clk); |
| if (rate < 0) { |
| pr_err("sp804: clock failed to get rate: %ld\n", rate); |
| clk_disable(clk); |
| clk_unprepare(clk); |
| clk_put(clk); |
| } |
| |
| return rate; |
| } |
| |
| static void __iomem *sched_clock_base; |
| |
| static u64 notrace sp804_read(void) |
| { |
| return ~readl_relaxed(sched_clock_base + TIMER_VALUE); |
| } |
| |
| void __init sp804_timer_disable(void __iomem *base) |
| { |
| writel(0, base + TIMER_CTRL); |
| } |
| |
| int __init __sp804_clocksource_and_sched_clock_init(void __iomem *base, |
| const char *name, |
| struct clk *clk, |
| int use_sched_clock) |
| { |
| long rate; |
| |
| if (!clk) { |
| clk = clk_get_sys("sp804", name); |
| if (IS_ERR(clk)) { |
| pr_err("sp804: clock not found: %d\n", |
| (int)PTR_ERR(clk)); |
| return PTR_ERR(clk); |
| } |
| } |
| |
| rate = sp804_get_clock_rate(clk); |
| if (rate < 0) |
| return -EINVAL; |
| |
| /* setup timer 0 as free-running clocksource */ |
| writel(0, base + TIMER_CTRL); |
| writel(0xffffffff, base + TIMER_LOAD); |
| writel(0xffffffff, base + TIMER_VALUE); |
| writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC, |
| base + TIMER_CTRL); |
| |
| clocksource_mmio_init(base + TIMER_VALUE, name, |
| rate, 200, 32, clocksource_mmio_readl_down); |
| |
| if (use_sched_clock) { |
| sched_clock_base = base; |
| sched_clock_register(sp804_read, 32, rate); |
| } |
| |
| return 0; |
| } |
| |
| |
| static void __iomem *clkevt_base; |
| static unsigned long clkevt_reload; |
| |
| /* |
| * IRQ handler for the timer |
| */ |
| static irqreturn_t sp804_timer_interrupt(int irq, void *dev_id) |
| { |
| struct clock_event_device *evt = dev_id; |
| |
| /* clear the interrupt */ |
| writel(1, clkevt_base + TIMER_INTCLR); |
| |
| evt->event_handler(evt); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static inline void timer_shutdown(struct clock_event_device *evt) |
| { |
| writel(0, clkevt_base + TIMER_CTRL); |
| } |
| |
| static int sp804_shutdown(struct clock_event_device *evt) |
| { |
| timer_shutdown(evt); |
| return 0; |
| } |
| |
| static int sp804_set_periodic(struct clock_event_device *evt) |
| { |
| unsigned long ctrl = TIMER_CTRL_32BIT | TIMER_CTRL_IE | |
| TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE; |
| |
| timer_shutdown(evt); |
| writel(clkevt_reload, clkevt_base + TIMER_LOAD); |
| writel(ctrl, clkevt_base + TIMER_CTRL); |
| return 0; |
| } |
| |
| static int sp804_set_next_event(unsigned long next, |
| struct clock_event_device *evt) |
| { |
| unsigned long ctrl = TIMER_CTRL_32BIT | TIMER_CTRL_IE | |
| TIMER_CTRL_ONESHOT | TIMER_CTRL_ENABLE; |
| |
| writel(next, clkevt_base + TIMER_LOAD); |
| writel(ctrl, clkevt_base + TIMER_CTRL); |
| |
| return 0; |
| } |
| |
| static struct clock_event_device sp804_clockevent = { |
| .features = CLOCK_EVT_FEAT_PERIODIC | |
| CLOCK_EVT_FEAT_ONESHOT | |
| CLOCK_EVT_FEAT_DYNIRQ, |
| .set_state_shutdown = sp804_shutdown, |
| .set_state_periodic = sp804_set_periodic, |
| .set_state_oneshot = sp804_shutdown, |
| .tick_resume = sp804_shutdown, |
| .set_next_event = sp804_set_next_event, |
| .rating = 300, |
| }; |
| |
| static struct irqaction sp804_timer_irq = { |
| .name = "timer", |
| .flags = IRQF_TIMER | IRQF_IRQPOLL, |
| .handler = sp804_timer_interrupt, |
| .dev_id = &sp804_clockevent, |
| }; |
| |
| int __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struct clk *clk, const char *name) |
| { |
| struct clock_event_device *evt = &sp804_clockevent; |
| long rate; |
| |
| if (!clk) |
| clk = clk_get_sys("sp804", name); |
| if (IS_ERR(clk)) { |
| pr_err("sp804: %s clock not found: %d\n", name, |
| (int)PTR_ERR(clk)); |
| return PTR_ERR(clk); |
| } |
| |
| rate = sp804_get_clock_rate(clk); |
| if (rate < 0) |
| return -EINVAL; |
| |
| clkevt_base = base; |
| clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ); |
| evt->name = name; |
| evt->irq = irq; |
| evt->cpumask = cpu_possible_mask; |
| |
| writel(0, base + TIMER_CTRL); |
| |
| setup_irq(irq, &sp804_timer_irq); |
| clockevents_config_and_register(evt, rate, 0xf, 0xffffffff); |
| |
| return 0; |
| } |
| |
| static int __init sp804_of_init(struct device_node *np) |
| { |
| static bool initialized = false; |
| void __iomem *base; |
| int irq, ret = -EINVAL; |
| u32 irq_num = 0; |
| struct clk *clk1, *clk2; |
| const char *name = of_get_property(np, "compatible", NULL); |
| |
| base = of_iomap(np, 0); |
| if (!base) |
| return -ENXIO; |
| |
| /* Ensure timers are disabled */ |
| writel(0, base + TIMER_CTRL); |
| writel(0, base + TIMER_2_BASE + TIMER_CTRL); |
| |
| if (initialized || !of_device_is_available(np)) { |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| clk1 = of_clk_get(np, 0); |
| if (IS_ERR(clk1)) |
| clk1 = NULL; |
| |
| /* Get the 2nd clock if the timer has 3 timer clocks */ |
| if (of_count_phandle_with_args(np, "clocks", "#clock-cells") == 3) { |
| clk2 = of_clk_get(np, 1); |
| if (IS_ERR(clk2)) { |
| pr_err("sp804: %s clock not found: %d\n", np->name, |
| (int)PTR_ERR(clk2)); |
| clk2 = NULL; |
| } |
| } else |
| clk2 = clk1; |
| |
| irq = irq_of_parse_and_map(np, 0); |
| if (irq <= 0) |
| goto err; |
| |
| of_property_read_u32(np, "arm,sp804-has-irq", &irq_num); |
| if (irq_num == 2) { |
| |
| ret = __sp804_clockevents_init(base + TIMER_2_BASE, irq, clk2, name); |
| if (ret) |
| goto err; |
| |
| ret = __sp804_clocksource_and_sched_clock_init(base, name, clk1, 1); |
| if (ret) |
| goto err; |
| } else { |
| |
| ret = __sp804_clockevents_init(base, irq, clk1 , name); |
| if (ret) |
| goto err; |
| |
| ret =__sp804_clocksource_and_sched_clock_init(base + TIMER_2_BASE, |
| name, clk2, 1); |
| if (ret) |
| goto err; |
| } |
| initialized = true; |
| |
| return 0; |
| err: |
| iounmap(base); |
| return ret; |
| } |
| CLOCKSOURCE_OF_DECLARE(sp804, "arm,sp804", sp804_of_init); |
| |
| static int __init integrator_cp_of_init(struct device_node *np) |
| { |
| static int init_count = 0; |
| void __iomem *base; |
| int irq, ret = -EINVAL; |
| const char *name = of_get_property(np, "compatible", NULL); |
| struct clk *clk; |
| |
| base = of_iomap(np, 0); |
| if (!base) { |
| pr_err("Failed to iomap\n"); |
| return -ENXIO; |
| } |
| |
| clk = of_clk_get(np, 0); |
| if (IS_ERR(clk)) { |
| pr_err("Failed to get clock\n"); |
| return PTR_ERR(clk); |
| } |
| |
| /* Ensure timer is disabled */ |
| writel(0, base + TIMER_CTRL); |
| |
| if (init_count == 2 || !of_device_is_available(np)) |
| goto err; |
| |
| if (!init_count) { |
| ret = __sp804_clocksource_and_sched_clock_init(base, name, clk, 0); |
| if (ret) |
| goto err; |
| } else { |
| irq = irq_of_parse_and_map(np, 0); |
| if (irq <= 0) |
| goto err; |
| |
| ret = __sp804_clockevents_init(base, irq, clk, name); |
| if (ret) |
| goto err; |
| } |
| |
| init_count++; |
| return 0; |
| err: |
| iounmap(base); |
| return ret; |
| } |
| CLOCKSOURCE_OF_DECLARE(intcp, "arm,integrator-cp-timer", integrator_cp_of_init); |