diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 02145e9..1196f61 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2758,6 +2758,29 @@
 
 	dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n");
 	dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n");
+
+	/*
+	 * RICOH 0xe823 SD/MMC card reader fails to recognize
+	 * certain types of SD/MMC cards. Lowering the SD base
+	 * clock frequency from 200Mhz to 50Mhz fixes this issue.
+	 *
+	 * 0x150 - SD2.0 mode enable for changing base clock
+	 *	   frequency to 50Mhz
+	 * 0xe1  - Base clock frequency
+	 * 0x32  - 50Mhz new clock frequency
+	 * 0xf9  - Key register for 0x150
+	 * 0xfc  - key register for 0xe1
+	 */
+	if (dev->device == PCI_DEVICE_ID_RICOH_R5CE823) {
+		pci_write_config_byte(dev, 0xf9, 0xfc);
+		pci_write_config_byte(dev, 0x150, 0x10);
+		pci_write_config_byte(dev, 0xf9, 0x00);
+		pci_write_config_byte(dev, 0xfc, 0x01);
+		pci_write_config_byte(dev, 0xe1, 0x32);
+		pci_write_config_byte(dev, 0xfc, 0x00);
+
+		dev_notice(&dev->dev, "MMC controller base frequency changed to 50Mhz.\n");
+	}
 }
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);