| Freescale i.MX System Reset Controller |
| ====================================== |
| Please also refer to reset.txt in this directory for common reset |
| controller binding usage. |
| - compatible: Should be "fsl,<chip>-src" |
| - reg: should be register base and length as documented in the |
| - interrupts: Should contain SRC interrupt and CPU WDOG interrupt, |
| - #reset-cells: 1, see below |
| compatible = "fsl,imx6q-src"; |
| reg = <0x020d8000 0x4000>; |
| interrupts = <0 91 0x04 0 96 0x04>; |
| Specifying reset lines connected to IP modules |
| ============================================== |
| The system reset controller can be used to reset the GPU, VPU, |
| IPU, and OpenVG IP modules on i.MX5 and i.MX6 ICs. Those device |
| nodes should specify the reset line on the SRC in their resets |
| property, containing a phandle to the SRC device node and a |
| RESET_INDEX specifying which module to reset, as described in |
| The following RESET_INDEX values are valid for i.MX5: |
| The following additional RESET_INDEX value is valid for i.MX6: |