| QCOM device tree bindings |
| ------------------------- |
| |
| Some qcom based bootloaders identify the dtb blob based on a set of |
| device properties like SoC and platform and revisions of those components. |
| To support this scheme, we encode this information into the board compatible |
| string. |
| |
| Each board must specify a top-level board compatible string with the following |
| format: |
| |
| compatible = "qcom,<SoC>[-<soc_version>][-<foundry_id>]-<board>[/<subtype>][-<board_version>]" |
| |
| The 'SoC' and 'board' elements are required. All other elements are optional. |
| |
| The 'SoC' element must be one of the following strings: |
| |
| apq8016 |
| apq8074 |
| apq8084 |
| apq8096 |
| msm8916 |
| msm8974 |
| msm8992 |
| msm8994 |
| msm8996 |
| mdm9615 |
| |
| The 'board' element must be one of the following strings: |
| |
| cdp |
| liquid |
| dragonboard |
| mtp |
| sbc |
| |
| The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor> |
| where the minor number may be omitted when it's zero, i.e. v1.0 is the same |
| as v1. If all versions of the 'board_version' elements match, then a |
| wildcard '*' should be used, e.g. 'v*'. |
| |
| The 'foundry_id' and 'subtype' elements are one or more digits from 0 to 9. |
| |
| Examples: |
| |
| "qcom,msm8916-v1-cdp-pm8916-v2.1" |
| |
| A CDP board with an msm8916 SoC, version 1 paired with a pm8916 PMIC of version |
| 2.1. |
| |
| "qcom,apq8074-v2.0-2-dragonboard/1-v0.1" |
| |
| A dragonboard board v0.1 of subtype 1 with an apq8074 SoC version 2, made in |
| foundry 2. |