[PATCH] m68k: Moved initialisation of conswitchp from subarches to global arch setup
Signed-off-by: Kars de Jong <jongk@linux-m68k.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index da24476..8eadde9 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -431,9 +431,6 @@
mach_floppy_setup = amiga_floppy_setup;
#endif
mach_reset = amiga_reset;
-#ifdef CONFIG_DUMMY_CONSOLE
- conswitchp = &dummy_con;
-#endif
#if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
mach_beep = amiga_mksound;
#endif
diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c
index 2649294..d401962 100644
--- a/arch/m68k/apollo/config.c
+++ b/arch/m68k/apollo/config.c
@@ -176,9 +176,6 @@
mach_set_clock_mmss = dn_dummy_set_clock_mmss; /* */
mach_process_int = dn_process_int;
mach_reset = dn_dummy_reset; /* */
-#ifdef CONFIG_DUMMY_CONSOLE
- conswitchp = &dummy_con;
-#endif
#ifdef CONFIG_HEARTBEAT
mach_heartbeat = dn_heartbeat;
#endif
diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c
index 9261d2d..f6d266b 100644
--- a/arch/m68k/atari/config.c
+++ b/arch/m68k/atari/config.c
@@ -247,9 +247,6 @@
#ifdef CONFIG_ATARI_FLOPPY
mach_floppy_setup = atari_floppy_setup;
#endif
-#ifdef CONFIG_DUMMY_CONSOLE
- conswitchp = &dummy_con;
-#endif
mach_max_dma_address = 0xffffff;
#if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
mach_beep = atari_mksound;
diff --git a/arch/m68k/hp300/config.c b/arch/m68k/hp300/config.c
index a0b854f..6d129ee 100644
--- a/arch/m68k/hp300/config.c
+++ b/arch/m68k/hp300/config.c
@@ -261,9 +261,6 @@
#ifdef CONFIG_HEARTBEAT
mach_heartbeat = hp300_pulse;
#endif
-#ifdef CONFIG_DUMMY_CONSOLE
- conswitchp = &dummy_con;
-#endif
mach_max_dma_address = 0xffffffff;
if (hp300_model >= HP_330 && hp300_model <= HP_433S && hp300_model != HP_350) {
diff --git a/arch/m68k/kernel/setup.c b/arch/m68k/kernel/setup.c
index c4d4d05..583526f 100644
--- a/arch/m68k/kernel/setup.c
+++ b/arch/m68k/kernel/setup.c
@@ -282,6 +282,10 @@
}
}
+#ifdef CONFIG_DUMMY_CONSOLE
+ conswitchp = &dummy_con;
+#endif
+
switch (m68k_machtype) {
#ifdef CONFIG_AMIGA
case MACH_AMIGA:
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index cd19cbb..14f8d3f4 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -212,9 +212,6 @@
mach_reset = mac_reset;
mach_halt = mac_poweroff;
mach_power_off = mac_poweroff;
-#ifdef CONFIG_DUMMY_CONSOLE
- conswitchp = &dummy_con;
-#endif
mach_max_dma_address = 0xffffffff;
#if 0
mach_debug_init = mac_debug_init;
diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
index 02b626bae..67e88a4 100644
--- a/arch/m68k/q40/config.c
+++ b/arch/m68k/q40/config.c
@@ -194,9 +194,6 @@
mach_heartbeat = q40_heartbeat;
#endif
mach_halt = q40_halt;
-#ifdef CONFIG_DUMMY_CONSOLE
- conswitchp = &dummy_con;
-#endif
/* disable a few things that SMSQ might have left enabled */
q40_disable_irqs();
diff --git a/arch/m68k/sun3/config.c b/arch/m68k/sun3/config.c
index 77d05bc..f1ca0df 100644
--- a/arch/m68k/sun3/config.c
+++ b/arch/m68k/sun3/config.c
@@ -160,9 +160,6 @@
mach_hwclk = sun3_hwclk;
mach_halt = sun3_halt;
mach_get_hardware_list = sun3_get_hardware_list;
-#if defined(CONFIG_DUMMY_CONSOLE)
- conswitchp = &dummy_con;
-#endif
memory_start = ((((int)&_end) + 0x2000) & ~0x1fff);
// PROM seems to want the last couple of physical pages. --m
diff --git a/arch/m68k/sun3x/config.c b/arch/m68k/sun3x/config.c
index 0ef547f..0920f5d 100644
--- a/arch/m68k/sun3x/config.c
+++ b/arch/m68k/sun3x/config.c
@@ -71,10 +71,6 @@
mach_get_model = sun3_get_model;
mach_get_hardware_list = sun3x_get_hardware_list;
-#ifdef CONFIG_DUMMY_CONSOLE
- conswitchp = &dummy_con;
-#endif
-
sun3_intreg = (unsigned char *)SUN3X_INTREG;
/* only the serial console is known to work anyway... */