mac80211: Fix HT channel selection
HT management is done differently for AP and STA modes, unify
to just the ->config() callback since HT is fundamentally a
PHY property and cannot be per-BSS.
Rename enum nl80211_sec_chan_offset as nl80211_channel_type to denote
the channel type ( NO_HT, HT20, HT40+, HT40- ).
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 23b5eea..3ea0884 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1122,12 +1122,12 @@
static int ieee80211_set_channel(struct wiphy *wiphy,
struct ieee80211_channel *chan,
- enum nl80211_sec_chan_offset sec_chan_offset)
+ enum nl80211_channel_type channel_type)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
local->oper_channel = chan;
- local->oper_sec_chan_offset = sec_chan_offset;
+ local->oper_channel_type = channel_type;
return ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
}
diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c
index a1eed70..5f510a1 100644
--- a/net/mac80211/ht.c
+++ b/net/mac80211/ht.c
@@ -98,6 +98,7 @@
struct ieee80211_bss_ht_conf ht;
u32 changed = 0;
bool enable_ht = true, ht_changed;
+ enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT;
sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
@@ -112,24 +113,36 @@
ieee80211_channel_to_frequency(hti->control_chan))
enable_ht = false;
- /*
- * XXX: This is totally incorrect when there are multiple virtual
- * interfaces, needs to be fixed later.
- */
- ht_changed = local->hw.conf.ht.enabled != enable_ht;
+ if (enable_ht) {
+ channel_type = NL80211_CHAN_HT20;
+
+ if (!(ap_ht_cap_flags & IEEE80211_HT_CAP_40MHZ_INTOLERANT) &&
+ (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) &&
+ (hti->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) {
+ switch(hti->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
+ case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+ channel_type = NL80211_CHAN_HT40PLUS;
+ break;
+ case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+ channel_type = NL80211_CHAN_HT40MINUS;
+ break;
+ }
+ }
+ }
+
+ ht_changed = local->hw.conf.ht.enabled != enable_ht ||
+ channel_type != local->hw.conf.ht.channel_type;
+
+ local->oper_channel_type = channel_type;
local->hw.conf.ht.enabled = enable_ht;
+
if (ht_changed)
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_HT);
/* disable HT */
if (!enable_ht)
return 0;
- ht.secondary_channel_offset =
- hti->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET;
- ht.width_40_ok =
- !(ap_ht_cap_flags & IEEE80211_HT_CAP_40MHZ_INTOLERANT) &&
- (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) &&
- (hti->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY);
+
ht.operation_mode = le16_to_cpu(hti->operation_mode);
/* if bss configuration changed store the new one */
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 6f59e11..a7dabae 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -625,7 +625,7 @@
struct delayed_work scan_work;
struct ieee80211_sub_if_data *scan_sdata;
struct ieee80211_channel *oper_channel, *scan_channel;
- enum nl80211_sec_chan_offset oper_sec_chan_offset;
+ enum nl80211_channel_type oper_channel_type;
u8 scan_ssid[IEEE80211_MAX_SSID_LEN];
size_t scan_ssid_len;
struct list_head bss_list;
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 6d87103..a0371ca 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -195,37 +195,30 @@
struct ieee80211_channel *chan;
int ret = 0;
int power;
- enum nl80211_sec_chan_offset sec_chan_offset;
+ enum nl80211_channel_type channel_type;
might_sleep();
if (local->sw_scanning) {
chan = local->scan_channel;
- sec_chan_offset = NL80211_SEC_CHAN_NO_HT;
+ channel_type = NL80211_CHAN_NO_HT;
} else {
chan = local->oper_channel;
- sec_chan_offset = local->oper_sec_chan_offset;
+ channel_type = local->oper_channel_type;
}
if (chan != local->hw.conf.channel ||
- sec_chan_offset != local->hw.conf.ht.sec_chan_offset) {
+ channel_type != local->hw.conf.ht.channel_type) {
local->hw.conf.channel = chan;
- switch (sec_chan_offset) {
- case NL80211_SEC_CHAN_NO_HT:
+ local->hw.conf.ht.channel_type = channel_type;
+ switch (channel_type) {
+ case NL80211_CHAN_NO_HT:
local->hw.conf.ht.enabled = false;
- local->hw.conf.ht.sec_chan_offset = 0;
break;
- case NL80211_SEC_CHAN_DISABLED:
+ case NL80211_CHAN_HT20:
+ case NL80211_CHAN_HT40MINUS:
+ case NL80211_CHAN_HT40PLUS:
local->hw.conf.ht.enabled = true;
- local->hw.conf.ht.sec_chan_offset = 0;
- break;
- case NL80211_SEC_CHAN_BELOW:
- local->hw.conf.ht.enabled = true;
- local->hw.conf.ht.sec_chan_offset = -1;
- break;
- case NL80211_SEC_CHAN_ABOVE:
- local->hw.conf.ht.enabled = true;
- local->hw.conf.ht.sec_chan_offset = 1;
break;
}
changed |= IEEE80211_CONF_CHANGE_CHANNEL;
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 290b001..e4d1fca 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -858,6 +858,7 @@
rcu_read_unlock();
local->hw.conf.ht.enabled = false;
+ local->oper_channel_type = NL80211_CHAN_NO_HT;
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_HT);
ieee80211_bss_info_change_notify(sdata, changed);
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 505d68f..71a8391 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -641,7 +641,7 @@
chan->flags & IEEE80211_CHAN_NO_IBSS)
return ret;
local->oper_channel = chan;
- local->oper_sec_chan_offset = NL80211_SEC_CHAN_NO_HT;
+ local->oper_channel_type = NL80211_CHAN_NO_HT;
if (local->sw_scanning || local->hw_scanning)
ret = 0;