b43: add hardware tkip
This add hardware tkip for b43.
Signed-off-by: Gregor Kowski <gregor.kowski@gmail.com>
Acked-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index 41a0e9c..289aaf6 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -1188,7 +1188,7 @@
header = &(ring->txhdr_cache[(slot / TX_SLOTS_PER_FRAME) * hdrsize]);
cookie = generate_cookie(ring, slot);
err = b43_generate_txhdr(ring->dev, header,
- skb->data, skb->len, info, cookie);
+ skb, info, cookie);
if (unlikely(err)) {
ring->current_slot = old_top_slot;
ring->used_slots = old_used_slots;
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 78ddbc7..f5bdf1c 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -80,6 +80,10 @@
module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
+static int modparam_hwtkip;
+module_param_named(hwtkip, modparam_hwtkip, int, 0444);
+MODULE_PARM_DESC(hwtkip, "Enable hardware tkip.");
+
static int modparam_qos = 1;
module_param_named(qos, modparam_qos, int, 0444);
MODULE_PARM_DESC(qos, "Enable QOS support (default on)");
@@ -834,6 +838,85 @@
(index * 2) + 1, addrtmp[1]);
}
+/* The ucode will use phase1 key with TEK key to decrypt rx packets.
+ * When a packet is received, the iv32 is checked.
+ * - if it doesn't the packet is returned without modification (and software
+ * decryption can be done). That's what happen when iv16 wrap.
+ * - if it does, the rc4 key is computed, and decryption is tried.
+ * Either it will success and B43_RX_MAC_DEC is returned,
+ * either it fails and B43_RX_MAC_DEC|B43_RX_MAC_DECERR is returned
+ * and the packet is not usable (it got modified by the ucode).
+ * So in order to never have B43_RX_MAC_DECERR, we should provide
+ * a iv32 and phase1key that match. Because we drop packets in case of
+ * B43_RX_MAC_DECERR, if we have a correct iv32 but a wrong phase1key, all
+ * packets will be lost without higher layer knowing (ie no resync possible
+ * until next wrap).
+ *
+ * NOTE : this should support 50 key like RCMTA because
+ * (B43_SHM_SH_KEYIDXBLOCK - B43_SHM_SH_TKIPTSCTTAK)/14 = 50
+ */
+static void rx_tkip_phase1_write(struct b43_wldev *dev, u8 index, u32 iv32,
+ u16 *phase1key)
+{
+ unsigned int i;
+ u32 offset;
+ u8 pairwise_keys_start = B43_NR_GROUP_KEYS * 2;
+
+ if (!modparam_hwtkip)
+ return;
+
+ if (b43_new_kidx_api(dev))
+ pairwise_keys_start = B43_NR_GROUP_KEYS;
+
+ B43_WARN_ON(index < pairwise_keys_start);
+ /* We have four default TX keys and possibly four default RX keys.
+ * Physical mac 0 is mapped to physical key 4 or 8, depending
+ * on the firmware version.
+ * So we must adjust the index here.
+ */
+ index -= pairwise_keys_start;
+ B43_WARN_ON(index >= B43_NR_PAIRWISE_KEYS);
+
+ if (b43_debug(dev, B43_DBG_KEYS)) {
+ b43dbg(dev->wl, "rx_tkip_phase1_write : idx 0x%x, iv32 0x%x\n",
+ index, iv32);
+ }
+ /* Write the key to the RX tkip shared mem */
+ offset = B43_SHM_SH_TKIPTSCTTAK + index * (10 + 4);
+ for (i = 0; i < 10; i += 2) {
+ b43_shm_write16(dev, B43_SHM_SHARED, offset + i,
+ phase1key ? phase1key[i / 2] : 0);
+ }
+ b43_shm_write16(dev, B43_SHM_SHARED, offset + i, iv32);
+ b43_shm_write16(dev, B43_SHM_SHARED, offset + i + 2, iv32 >> 16);
+}
+
+static void b43_op_update_tkip_key(struct ieee80211_hw *hw,
+ struct ieee80211_key_conf *keyconf, const u8 *addr,
+ u32 iv32, u16 *phase1key)
+{
+ struct b43_wl *wl = hw_to_b43_wl(hw);
+ struct b43_wldev *dev;
+ int index = keyconf->hw_key_idx;
+
+ if (B43_WARN_ON(!modparam_hwtkip))
+ return;
+
+ mutex_lock(&wl->mutex);
+
+ dev = wl->current_dev;
+ if (!dev || b43_status(dev) < B43_STAT_INITIALIZED)
+ goto out_unlock;
+
+ keymac_write(dev, index, NULL); /* First zero out mac to avoid race */
+
+ rx_tkip_phase1_write(dev, index, iv32, phase1key);
+ keymac_write(dev, index, addr);
+
+out_unlock:
+ mutex_unlock(&wl->mutex);
+}
+
static void do_key_write(struct b43_wldev *dev,
u8 index, u8 algorithm,
const u8 *key, size_t key_len, const u8 *mac_addr)
@@ -849,6 +932,19 @@
if (index >= pairwise_keys_start)
keymac_write(dev, index, NULL); /* First zero out mac. */
+ if (algorithm == B43_SEC_ALGO_TKIP) {
+ /*
+ * We should provide an initial iv32, phase1key pair.
+ * We could start with iv32=0 and compute the corresponding
+ * phase1key, but this means calling ieee80211_get_tkip_key
+ * with a fake skb (or export other tkip function).
+ * Because we are lazy we hope iv32 won't start with
+ * 0xffffffff and let's b43_op_update_tkip_key provide a
+ * correct pair.
+ */
+ rx_tkip_phase1_write(dev, index, 0xffffffff, (u16*)buf);
+ } else if (index >= pairwise_keys_start) /* clear it */
+ rx_tkip_phase1_write(dev, index, 0, NULL);
if (key)
memcpy(buf, key, key_len);
key_write(dev, index, algorithm, buf);
@@ -867,6 +963,15 @@
int i;
int pairwise_keys_start;
+ /* For ALG_TKIP the key is encoded as a 256-bit (32 byte) data block:
+ * - Temporal Encryption Key (128 bits)
+ * - Temporal Authenticator Tx MIC Key (64 bits)
+ * - Temporal Authenticator Rx MIC Key (64 bits)
+ *
+ * Hardware only store TEK
+ */
+ if (algorithm == B43_SEC_ALGO_TKIP && key_len == 32)
+ key_len = 16;
if (key_len > B43_SEC_KEYSIZE)
return -EINVAL;
for (i = 0; i < ARRAY_SIZE(dev->key); i++) {
@@ -973,6 +1078,14 @@
printk(" Algo: %04X/%02X", algo, key->algorithm);
if (index >= pairwise_keys_start) {
+ if (key->algorithm == B43_SEC_ALGO_TKIP) {
+ printk(" TKIP: ");
+ offset = B43_SHM_SH_TKIPTSCTTAK + (index - 4) * (10 + 4);
+ for (i = 0; i < 14; i += 2) {
+ u16 tmp = b43_shm_read16(dev, B43_SHM_SHARED, offset + i);
+ printk("%02X%02X", (tmp & 0xFF), ((tmp >> 8) & 0xFF));
+ }
+ }
rcmta0 = b43_shm_read32(dev, B43_SHM_RCMTA,
((index - pairwise_keys_start) * 2) + 0);
rcmta1 = b43_shm_read16(dev, B43_SHM_RCMTA,
@@ -3620,8 +3733,10 @@
switch (cmd) {
case SET_KEY:
- if (algorithm == B43_SEC_ALGO_TKIP) {
- /* FIXME: No TKIP hardware encryption for now. */
+ if (algorithm == B43_SEC_ALGO_TKIP &&
+ (!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE) ||
+ !modparam_hwtkip)) {
+ /* We support only pairwise key */
err = -EOPNOTSUPP;
goto out_unlock;
}
@@ -3651,6 +3766,8 @@
b43_hf_read(dev) & ~B43_HF_USEDEFKEYS);
}
key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+ if (algorithm == B43_SEC_ALGO_TKIP)
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
break;
case DISABLE_KEY: {
err = b43_key_clear(dev, key->hw_key_idx);
@@ -4378,6 +4495,7 @@
.bss_info_changed = b43_op_bss_info_changed,
.configure_filter = b43_op_configure_filter,
.set_key = b43_op_set_key,
+ .update_tkip_key = b43_op_update_tkip_key,
.get_stats = b43_op_get_stats,
.get_tx_stats = b43_op_get_tx_stats,
.get_tsf = b43_op_get_tsf,
diff --git a/drivers/net/wireless/b43/pio.c b/drivers/net/wireless/b43/pio.c
index 73c047d..3fd653c 100644
--- a/drivers/net/wireless/b43/pio.c
+++ b/drivers/net/wireless/b43/pio.c
@@ -461,8 +461,8 @@
cookie = generate_cookie(q, pack);
hdrlen = b43_txhdr_size(q->dev);
- err = b43_generate_txhdr(q->dev, (u8 *)&txhdr, skb->data,
- skb->len, info, cookie);
+ err = b43_generate_txhdr(q->dev, (u8 *)&txhdr, skb,
+ info, cookie);
if (err)
return err;
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index be1c53e..e7075d2 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -180,11 +180,12 @@
/* Generate a TX data header. */
int b43_generate_txhdr(struct b43_wldev *dev,
u8 *_txhdr,
- const unsigned char *fragment_data,
- unsigned int fragment_len,
+ struct sk_buff *skb_frag,
struct ieee80211_tx_info *info,
u16 cookie)
{
+ const unsigned char *fragment_data = skb_frag->data;
+ unsigned int fragment_len = skb_frag->len;
struct b43_txhdr *txhdr = (struct b43_txhdr *)_txhdr;
const struct b43_phy *phy = &dev->phy;
const struct ieee80211_hdr *wlhdr =
@@ -258,9 +259,26 @@
mac_ctl |= (key->algorithm << B43_TXH_MAC_KEYALG_SHIFT) &
B43_TXH_MAC_KEYALG;
wlhdr_len = ieee80211_hdrlen(fctl);
- iv_len = min((size_t) info->control.hw_key->iv_len,
- ARRAY_SIZE(txhdr->iv));
- memcpy(txhdr->iv, ((u8 *) wlhdr) + wlhdr_len, iv_len);
+ if (key->algorithm == B43_SEC_ALGO_TKIP) {
+ u16 phase1key[5];
+ int i;
+ /* we give the phase1key and iv16 here, the key is stored in
+ * shm. With that the hardware can do phase 2 and encryption.
+ */
+ ieee80211_get_tkip_key(info->control.hw_key, skb_frag,
+ IEEE80211_TKIP_P1_KEY, (u8*)phase1key);
+ /* phase1key is in host endian */
+ for (i = 0; i < 5; i++)
+ phase1key[i] = cpu_to_le16(phase1key[i]);
+
+ memcpy(txhdr->iv, phase1key, 10);
+ /* iv16 */
+ memcpy(txhdr->iv + 10, ((u8 *) wlhdr) + wlhdr_len, 3);
+ } else {
+ iv_len = min((size_t) info->control.hw_key->iv_len,
+ ARRAY_SIZE(txhdr->iv));
+ memcpy(txhdr->iv, ((u8 *) wlhdr) + wlhdr_len, iv_len);
+ }
}
if (b43_is_old_txhdr_format(dev)) {
b43_generate_plcp_hdr((struct b43_plcp_hdr4 *)(&txhdr->old_format.plcp),
diff --git a/drivers/net/wireless/b43/xmit.h b/drivers/net/wireless/b43/xmit.h
index 4fb2a19..3530de8 100644
--- a/drivers/net/wireless/b43/xmit.h
+++ b/drivers/net/wireless/b43/xmit.h
@@ -176,8 +176,7 @@
int b43_generate_txhdr(struct b43_wldev *dev,
u8 * txhdr,
- const unsigned char *fragment_data,
- unsigned int fragment_len,
+ struct sk_buff *skb_frag,
struct ieee80211_tx_info *txctl, u16 cookie);
/* Transmit Status */