USB: change interface to usb_lock_device_for_reset()
This patch (as1161) changes the interface to
usb_lock_device_for_reset(). The existing interface is apparently not
very clear, judging from the fact that several of its callers don't
use it correctly. The new interface always returns 0 for success and
it always requires the caller to unlock the device afterward.
The new routine will not return immediately if it is called while the
driver's probe method is running. Instead it will wait until the
probe is over and the device has been unlocked. This shouldn't cause
any problems; I don't know of any cases where drivers call
usb_lock_device_for_reset() during probe.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index 048d71d..12fb816 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -1579,7 +1579,7 @@
struct ub_dev *sc = container_of(work, struct ub_dev, reset_work);
unsigned long flags;
struct ub_lun *lun;
- int lkr, rc;
+ int rc;
if (!sc->reset) {
printk(KERN_WARNING "%s: Running reset unrequested\n",
@@ -1597,10 +1597,11 @@
} else if (sc->dev->actconfig->desc.bNumInterfaces != 1) {
;
} else {
- if ((lkr = usb_lock_device_for_reset(sc->dev, sc->intf)) < 0) {
+ rc = usb_lock_device_for_reset(sc->dev, sc->intf);
+ if (rc < 0) {
printk(KERN_NOTICE
"%s: usb_lock_device_for_reset failed (%d)\n",
- sc->name, lkr);
+ sc->name, rc);
} else {
rc = usb_reset_device(sc->dev);
if (rc < 0) {
@@ -1608,9 +1609,7 @@
"usb_lock_device_for_reset failed (%d)\n",
sc->name, rc);
}
-
- if (lkr)
- usb_unlock_device(sc->dev);
+ usb_unlock_device(sc->dev);
}
}
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 03cb494..f0a0f72 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -102,7 +102,7 @@
struct usbhid_device *usbhid =
container_of(work, struct usbhid_device, reset_work);
struct hid_device *hid = usbhid->hid;
- int rc_lock, rc = 0;
+ int rc = 0;
if (test_bit(HID_CLEAR_HALT, &usbhid->iofl)) {
dev_dbg(&usbhid->intf->dev, "clear halt\n");
@@ -113,11 +113,10 @@
else if (test_bit(HID_RESET_PENDING, &usbhid->iofl)) {
dev_dbg(&usbhid->intf->dev, "resetting device\n");
- rc = rc_lock = usb_lock_device_for_reset(hid_to_usb_dev(hid), usbhid->intf);
- if (rc_lock >= 0) {
+ rc = usb_lock_device_for_reset(hid_to_usb_dev(hid), usbhid->intf);
+ if (rc == 0) {
rc = usb_reset_device(hid_to_usb_dev(hid));
- if (rc_lock)
- usb_unlock_device(hid_to_usb_dev(hid));
+ usb_unlock_device(hid_to_usb_dev(hid));
}
clear_bit(HID_RESET_PENDING, &usbhid->iofl);
}
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index 8fb92ac..fa304e5 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -3655,7 +3655,7 @@
int ret;
pvr2_trace(PVR2_TRACE_INIT,"Performing a device reset...");
ret = usb_lock_device_for_reset(hdw->usb_dev,NULL);
- if (ret == 1) {
+ if (ret == 0) {
ret = usb_reset_device(hdw->usb_dev);
usb_unlock_device(hdw->usb_dev);
} else {
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 399e15f..400fa4c 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -513,10 +513,7 @@
* disconnect; in some drivers (such as usb-storage) the disconnect()
* or suspend() method will block waiting for a device reset to complete.
*
- * Returns a negative error code for failure, otherwise 1 or 0 to indicate
- * that the device will or will not have to be unlocked. (0 can be
- * returned when an interface is given and is BINDING, because in that
- * case the driver already owns the device lock.)
+ * Returns a negative error code for failure, otherwise 0.
*/
int usb_lock_device_for_reset(struct usb_device *udev,
const struct usb_interface *iface)
@@ -527,16 +524,9 @@
return -ENODEV;
if (udev->state == USB_STATE_SUSPENDED)
return -EHOSTUNREACH;
- if (iface) {
- switch (iface->condition) {
- case USB_INTERFACE_BINDING:
- return 0;
- case USB_INTERFACE_BOUND:
- break;
- default:
- return -EINTR;
- }
- }
+ if (iface && (iface->condition == USB_INTERFACE_UNBINDING ||
+ iface->condition == USB_INTERFACE_UNBOUND))
+ return -EINTR;
while (usb_trylock_device(udev) != 0) {
@@ -550,10 +540,11 @@
return -ENODEV;
if (udev->state == USB_STATE_SUSPENDED)
return -EHOSTUNREACH;
- if (iface && iface->condition != USB_INTERFACE_BOUND)
+ if (iface && (iface->condition == USB_INTERFACE_UNBINDING ||
+ iface->condition == USB_INTERFACE_UNBOUND))
return -EINTR;
}
- return 1;
+ return 0;
}
EXPORT_SYMBOL_GPL(usb_lock_device_for_reset);
diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c
index 885867a..4541dfc 100644
--- a/drivers/usb/image/microtek.c
+++ b/drivers/usb/image/microtek.c
@@ -350,17 +350,16 @@
static int mts_scsi_host_reset(struct scsi_cmnd *srb)
{
struct mts_desc* desc = (struct mts_desc*)(srb->device->host->hostdata[0]);
- int result, rc;
+ int result;
MTS_DEBUG_GOT_HERE();
mts_debug_dump(desc);
- rc = usb_lock_device_for_reset(desc->usb_dev, desc->usb_intf);
- if (rc < 0)
- return FAILED;
- result = usb_reset_device(desc->usb_dev);
- if (rc)
+ result = usb_lock_device_for_reset(desc->usb_dev, desc->usb_intf);
+ if (result == 0) {
+ result = usb_reset_device(desc->usb_dev);
usb_unlock_device(desc->usb_dev);
+ }
return result ? FAILED : SUCCESS;
}
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 79108d5..2058db4 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -1173,10 +1173,9 @@
*/
int usb_stor_port_reset(struct us_data *us)
{
- int result, rc_lock;
+ int result;
- result = rc_lock =
- usb_lock_device_for_reset(us->pusb_dev, us->pusb_intf);
+ result = usb_lock_device_for_reset(us->pusb_dev, us->pusb_intf);
if (result < 0)
US_DEBUGP("unable to lock device for reset: %d\n", result);
else {
@@ -1189,8 +1188,7 @@
US_DEBUGP("usb_reset_device returns %d\n",
result);
}
- if (rc_lock)
- usb_unlock_device(us->pusb_dev);
+ usb_unlock_device(us->pusb_dev);
}
return result;
}