libcamera/common_v3/ExynosCamera3Interface.h - LeafOS-Devices/android_hardware_samsung_slsi-linaro_exynos - Gitiles

 /*
  * Copyright (C) 2014, Samsung Electronics Co. LTD
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */

 #ifndef EXYNOS_CAMERA3_SERVICE_INTERFACE_H
 #define EXYNOS_CAMERA3_SERVICE_INTERFACE_H


 #define USE_ONE_INTERFACE_FILE

 #include <utils/RefBase.h>

 #include "hardware/camera3.h"
 #include "system/camera_metadata.h"

 #ifdef USE_ONE_INTERFACE_FILE
 #include "ExynosCameraFrameFactory.h"
 #include "ExynosCamera.h"
 #endif
 #include "ExynosCamera3.h"
 #include "ExynosCameraInterfaceState.h"
 #include "pthread.h"

 #ifdef USE_ONE_INTERFACE_FILE
 #define SET_METHOD(m) m : HAL_camera_device_##m
 #endif
 #define SET_METHOD3(m) m : HAL3_camera_device_##m

 /* flashlight control */
 #define TORCH_REAR_FILE_PATH "/sys/class/camera/flash/rear_torch_flash"
 #define TORCH_FRONT_FILE_PATH "/sys/class/camera/flash/front_torch_flash"

 /* init camera module */
 #define INIT_MODULE_PATH "/sys/class/camera/rear/fw_update"

 namespace android {

 static int sCameraInfo[][2] = {
 #if !defined(BOARD_FRONT_CAMERA_ONLY_USE)
     {
         CAMERA_FACING_BACK,
         BACK_ROTATION,  /* orientation */
     },
 #endif
     {
         CAMERA_FACING_FRONT,
         FRONT_ROTATION,  /* orientation */
     }
 };

 static CameraInfo sCameraHiddenInfo[] = {
 #if defined(BOARD_SECURE_CAMERA_SUPPORT)
     {
         CAMERA_FACING_FRONT,
         FRONT_ROTATION,  /* orientation */
     }
 #endif
 };

 /* This struct used in device3.3 service arbitration */
 struct CameraConfigInfo {
     int resource_cost;
     char** conflicting_devices;
     size_t conflicting_devices_length;
 };

 const CameraConfigInfo sCameraConfigInfo[] = {
 #if !defined(BOARD_FRONT_CAMERA_ONLY_USE)
     {
         51,      /* resoruce_cost               : [0 , 100] */
         NULL,    /* conflicting_devices         : NULL, (char *[]){"1"}, (char *[]){"0", "1"} */
         0,       /* conflicting_devices_lenght  : The length of the array in the conflicting_devices field */
     },
 #endif
     {
         51,      /* resoruce_cost               : [0 , 100] */
         NULL,    /* conflicting_devices         : NULL, (char *[]){"1"}, (char *[]){"0", "1"} */
         0,       /* conflicting_devices_lenght  : The length of the array in the conflicting_devices field */
     },
     {
         51,      /* resoruce_cost               : [0 , 100] */
         NULL,    /* conflicting_devices         : NULL, (char *[]){"1"}, (char *[]){"0", "1"} */
         0,       /* conflicting_devices_lenght  : The length of the array in the conflicting_devices field */
     },
     {
         51,      /* resoruce_cost               : [0 , 100] */
         NULL,    /* conflicting_devices         : NULL, (char *[]){"1"}, (char *[]){"0", "1"} */
         0,       /* conflicting_devices_lenght  : The length of the array in the conflicting_devices field */
     },
     {
         51,      /* resoruce_cost               : [0, 100] */
         NULL,    /* conflicting_devices         : NULL, (char *[]){"0"}, (char *[]){"0", "1"} */
         0,       /* conflicting_devices_lenght  : The length of the array in the conflicting_devices field */
     }
 };

 #ifdef USE_ONE_INTERFACE_FILE
 static camera_device_t *g_cam_device[MAX_NUM_OF_CAMERA];
 #endif
 static camera3_device_t *g_cam_device3[MAX_NUM_OF_CAMERA];
 static camera_metadata_t *g_cam_info[MAX_NUM_OF_CAMERA] = {NULL, NULL};
 static const camera_module_callbacks_t *g_callbacks = NULL;

 //ExynosCameraRequestManager *m_exynosCameraRequestManager[MAX_NUM_OF_CAMERA];
 //const   camera3_callback_ops_t *callbackOps;

 static Mutex            g_cam_openLock[MAX_NUM_OF_CAMERA];
 static Mutex            g_cam_configLock[MAX_NUM_OF_CAMERA];
 #ifdef USE_ONE_INTERFACE_FILE
 static Mutex            g_cam_previewLock[MAX_NUM_OF_CAMERA];
 static Mutex            g_cam_recordingLock[MAX_NUM_OF_CAMERA];
 #endif
 static bool             g_cam_torchEnabled[MAX_NUM_OF_CAMERA] = {false, false};
 pthread_t		g_thread;

 static inline ExynosCamera3 *obj(const struct camera3_device *dev)
 {
     return reinterpret_cast<ExynosCamera3 *>(dev->priv);
 };

 static int HAL_getCameraId(int cameraId);

 /**
  * Open camera device
  */
 static int HAL3_camera_device_open(const struct hw_module_t* module,
                                     const char *id,
                                     struct hw_device_t** device);

 /**
  * Close camera device
  */
 static int HAL3_camera_device_close(struct hw_device_t* device);

 /**
  * initialize
  * One-time initialization to pass framework callback function pointers to the HAL.
  */
 static int HAL3_camera_device_initialize(const struct camera3_device *dev,
                                         const camera3_callback_ops_t *callback_ops);

 /**
  * configure_streams
  * Reset the HAL camera device processing pipeline and set up new input and output streams.
  */
 static int HAL3_camera_device_configure_streams(const struct camera3_device *dev,
                                                 camera3_stream_configuration_t *stream_list);

 /**
  * register_stream_buffers
  * Register buffers for a given stream with the HAL device.
  */
 static int HAL3_camera_device_register_stream_buffers(const struct camera3_device *dev,
                                                     const camera3_stream_buffer_set_t *buffer_set);

 /**
  * construct_default_request_settings
  * Create capture settings for standard camera use cases.
  */
 static const camera_metadata_t* HAL3_camera_device_construct_default_request_settings(
                                                                 const struct camera3_device *dev,
                                                                 int type);

 /**
  * process_capture_request
  * Send a new capture request to the HAL.
  */
 static int HAL3_camera_device_process_capture_request(const struct camera3_device *dev,
                                                         camera3_capture_request_t *request);

 /**
  * flush
  * Flush all currently in-process captures and all buffers in the pipeline on the given device.
  */
 static int HAL3_camera_device_flush(const struct camera3_device *dev);

 /**
  * get_metadata_vendor_tag_ops
  * Get methods to query for vendor extension metadata tag information.
  */
 static void HAL3_camera_device_get_metadata_vendor_tag_ops(const struct camera3_device *dev,
                                                             vendor_tag_query_ops_t* ops);

 /**
  * dump
  * Print out debugging state for the camera device.
  */
 static void HAL3_camera_device_dump(const struct camera3_device *dev, int fd);

 /**
  * Retrun the camera hardware info
  */
 static int HAL_getCameraInfo(int camera_id, struct camera_info *info);

 /**
  * Provide callback function pointers to the HAL module to inform framework
  * of asynchronous camera module events.
  */
 static int HAL_set_callbacks(const camera_module_callbacks_t *callbacks);

 /**
  * Return number of the camera hardware
  */
 static int HAL_getNumberOfCameras();
 static int HAL_getNumberOfHiddenCameras();

 #ifdef USE_ONE_INTERFACE_FILE
 static inline ExynosCamera *obj(struct camera_device *dev)
 {
     return reinterpret_cast<ExynosCamera *>(dev->priv);
 };

 /**
  * Open camera device
  */
 static int HAL_camera_device_open(
         const struct hw_module_t* module,
         const char *id,
         struct hw_device_t** device);

 /**
  * Close camera device
  */
 static int HAL_camera_device_close(struct hw_device_t* device);

 /**
  * Set the preview_stream_ops to which preview frames are sent
  */
 static int HAL_camera_device_set_preview_window(
         struct camera_device *dev,
         struct preview_stream_ops *buf);

 /**
  * Set the notification and data callbacks
  */
 static void HAL_camera_device_set_callbacks(
         struct camera_device *dev,
         camera_notify_callback notify_cb,
         camera_data_callback data_cb,
         camera_data_timestamp_callback data_cb_timestamp,
         camera_request_memory get_memory,
         void* user);

 /**
  * The following three functions all take a msg_type, which is a bitmask of
  * the messages defined in include/ui/Camera.h
  */

 /**
  * Enable a message, or set of messages.
  */
 static void HAL_camera_device_enable_msg_type(
         struct camera_device *dev,
         int32_t msg_type);

 /**
  * Disable a message, or a set of messages.
  *
  * Once received a call to disableMsgType(CAMERA_MSG_VIDEO_FRAME), camera
  * HAL should not rely on its client to call releaseRecordingFrame() to
  * release video recording frames sent out by the cameral HAL before and
  * after the disableMsgType(CAMERA_MSG_VIDEO_FRAME) call. Camera HAL
  * clients must not modify/access any video recording frame after calling
  * disableMsgType(CAMERA_MSG_VIDEO_FRAME).
  */
 static void HAL_camera_device_disable_msg_type(
         struct camera_device *dev,
         int32_t msg_type);

 /**
  * Query whether a message, or a set of messages, is enabled.  Note that
  * this is operates as an AND, if any of the messages queried are off, this
  * will return false.
  */
 static int HAL_camera_device_msg_type_enabled(
         struct camera_device *dev,
         int32_t msg_type);

 /**
  * Start preview mode.
  */
 static int HAL_camera_device_start_preview(struct camera_device *dev);

 /**
  * Stop a previously started preview.
  */
 static void HAL_camera_device_stop_preview(struct camera_device *dev);

 /**
  * Returns true if preview is enabled.
  */
 static int HAL_camera_device_preview_enabled(struct camera_device *dev);

 /**
  * Request the camera HAL to store meta data or real YUV data in the video
  * buffers sent out via CAMERA_MSG_VIDEO_FRAME for a recording session. If
  * it is not called, the default camera HAL behavior is to store real YUV
  * data in the video buffers.
  *
  * This method should be called before startRecording() in order to be
  * effective.
  *
  * If meta data is stored in the video buffers, it is up to the receiver of
  * the video buffers to interpret the contents and to find the actual frame
  * data with the help of the meta data in the buffer. How this is done is
  * outside of the scope of this method.
  *
  * Some camera HALs may not support storing meta data in the video buffers,
  * but all camera HALs should support storing real YUV data in the video
  * buffers. If the camera HAL does not support storing the meta data in the
  * video buffers when it is requested to do do, INVALID_OPERATION must be
  * returned. It is very useful for the camera HAL to pass meta data rather
  * than the actual frame data directly to the video encoder, since the
  * amount of the uncompressed frame data can be very large if video size is
  * large.
  *
  * @param enable if true to instruct the camera HAL to store
  *      meta data in the video buffers; false to instruct
  *      the camera HAL to store real YUV data in the video
  *      buffers.
  *
  * @return OK on success.
  */
 static int HAL_camera_device_store_meta_data_in_buffers(
         struct camera_device *dev,
         int enable);

 /**
  * Start record mode. When a record image is available, a
  * CAMERA_MSG_VIDEO_FRAME message is sent with the corresponding
  * frame. Every record frame must be released by a camera HAL client via
  * releaseRecordingFrame() before the client calls
  * disableMsgType(CAMERA_MSG_VIDEO_FRAME). After the client calls
  * disableMsgType(CAMERA_MSG_VIDEO_FRAME), it is the camera HAL's
  * responsibility to manage the life-cycle of the video recording frames,
  * and the client must not modify/access any video recording frames.
  */
 static int HAL_camera_device_start_recording(struct camera_device *dev);

 /**
  * Stop a previously started recording.
  */
 static void HAL_camera_device_stop_recording(struct camera_device *dev);

 /**
  * Returns true if recording is enabled.
  */
 static int HAL_camera_device_recording_enabled(struct camera_device *dev);

 /**
  * Release a record frame previously returned by CAMERA_MSG_VIDEO_FRAME.
  *
  * It is camera HAL client's responsibility to release video recording
  * frames sent out by the camera HAL before the camera HAL receives a call
  * to disableMsgType(CAMERA_MSG_VIDEO_FRAME). After it receives the call to
  * disableMsgType(CAMERA_MSG_VIDEO_FRAME), it is the camera HAL's
  * responsibility to manage the life-cycle of the video recording frames.
  */
 static void HAL_camera_device_release_recording_frame(
         struct camera_device *dev,
         const void *opaque);

 /**
  * Start auto focus, the notification callback routine is called with
  * CAMERA_MSG_FOCUS once when focusing is complete. autoFocus() will be
  * called again if another auto focus is needed.
  */
 static int HAL_camera_device_auto_focus(struct camera_device *dev);

 /**
  * Cancels auto-focus function. If the auto-focus is still in progress,
  * this function will cancel it. Whether the auto-focus is in progress or
  * not, this function will return the focus position to the default.  If
  * the camera does not support auto-focus, this is a no-op.
  */
 static int HAL_camera_device_cancel_auto_focus(struct camera_device *dev);

 /**
  * Take a picture.
  */
 static int HAL_camera_device_take_picture(struct camera_device *dev);

 /**
  * Cancel a picture that was started with takePicture. Calling this method
  * when no picture is being taken is a no-op.
  */
 static int HAL_camera_device_cancel_picture(struct camera_device *dev);

 /**
  * Set the camera parameters. This returns BAD_VALUE if any parameter is
  * invalid or not supported.
  */
 static int HAL_camera_device_set_parameters(
         struct camera_device *dev,
         const char *parms);

 /**
  * Return the camera parameters.
  */
 char *HAL_camera_device_get_parameters(struct camera_device *dev);

 /**
  * Release buffer that used by the camera parameters.
  */
 static void HAL_camera_device_put_parameters(
         struct camera_device *dev,
         char *parms);

 /**
  * Send command to camera driver.
  */
 static int HAL_camera_device_send_command(
         struct camera_device *dev,
         int32_t cmd,
         int32_t arg1,
         int32_t arg2);

 /**
  * Release the hardware resources owned by this object.  Note that this is
  * *not* done in the destructor.
  */
 static void HAL_camera_device_release(struct camera_device *dev);

 /**
  * Dump state of the camera hardware
  */
 static int HAL_camera_device_dump(struct camera_device *dev, int fd);
 #endif

 static void HAL_get_vendor_tag_ops(vendor_tag_ops_t* ops);

 static int HAL_open_legacy(const struct hw_module_t* module, const char* id, uint32_t halVersion, struct hw_device_t** device);

 static int HAL_set_torch_mode(const char* camera_id, bool enabled);

 static int HAL_init(void);

 #ifdef USE_ONE_INTERFACE_FILE
 static camera_device_ops_t camera_device_ops = {
         SET_METHOD(set_preview_window),
         SET_METHOD(set_callbacks),
         SET_METHOD(enable_msg_type),
         SET_METHOD(disable_msg_type),
         SET_METHOD(msg_type_enabled),
         SET_METHOD(start_preview),
         SET_METHOD(stop_preview),
         SET_METHOD(preview_enabled),
         SET_METHOD(store_meta_data_in_buffers),
         SET_METHOD(start_recording),
         SET_METHOD(stop_recording),
         SET_METHOD(recording_enabled),
         SET_METHOD(release_recording_frame),
         SET_METHOD(auto_focus),
         SET_METHOD(cancel_auto_focus),
         SET_METHOD(take_picture),
         SET_METHOD(cancel_picture),
         SET_METHOD(set_parameters),
         SET_METHOD(get_parameters),
         SET_METHOD(put_parameters),
         SET_METHOD(send_command),
         SET_METHOD(release),
         SET_METHOD(dump),
 };
 #endif

 static camera3_device_ops_t camera_device3_ops = {
         SET_METHOD3(initialize),
         SET_METHOD3(configure_streams),
         NULL,
         SET_METHOD3(construct_default_request_settings),
         SET_METHOD3(process_capture_request),
         SET_METHOD3(get_metadata_vendor_tag_ops),
         SET_METHOD3(dump),
         SET_METHOD3(flush),
         {0} /* reserved for future use */
 };

 static hw_module_methods_t mCameraHwModuleMethods = {
             open : HAL3_camera_device_open
 };

 /*
  * Required HAL header.
  */
 extern "C" {
     camera_module_t HAL_MODULE_INFO_SYM = {
       common : {
           tag                : HARDWARE_MODULE_TAG,
           module_api_version : CAMERA_MODULE_API_VERSION_2_4,
           hal_api_version    : HARDWARE_HAL_API_VERSION,
           id                 : CAMERA_HARDWARE_MODULE_ID,
           name               : "Exynos Camera HAL3",
           author             : "Samsung Electronics Inc",
           methods            : &mCameraHwModuleMethods,
           dso                : NULL,
           reserved           : {0},
       },
       get_number_of_cameras : HAL_getNumberOfCameras,
       get_camera_info       : HAL_getCameraInfo,
       set_callbacks         : HAL_set_callbacks,
       get_vendor_tag_ops    : HAL_get_vendor_tag_ops,
       open_legacy           : HAL_open_legacy,
       set_torch_mode        : HAL_set_torch_mode,
       init                  : HAL_init,
       reserved              : {0},
     };
 }

 }; // namespace android
 #endif
	/*
	* Copyright (C) 2014, Samsung Electronics Co. LTD
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	#ifndef EXYNOS_CAMERA3_SERVICE_INTERFACE_H
	#define EXYNOS_CAMERA3_SERVICE_INTERFACE_H


	#define USE_ONE_INTERFACE_FILE

	#include <utils/RefBase.h>

	#include "hardware/camera3.h"
	#include "system/camera_metadata.h"

	#ifdef USE_ONE_INTERFACE_FILE
	#include "ExynosCameraFrameFactory.h"
	#include "ExynosCamera.h"
	#endif
	#include "ExynosCamera3.h"
	#include "ExynosCameraInterfaceState.h"
	#include "pthread.h"

	#ifdef USE_ONE_INTERFACE_FILE
	#define SET_METHOD(m) m : HAL_camera_device_##m
	#endif
	#define SET_METHOD3(m) m : HAL3_camera_device_##m

	/* flashlight control */
	#define TORCH_REAR_FILE_PATH "/sys/class/camera/flash/rear_torch_flash"
	#define TORCH_FRONT_FILE_PATH "/sys/class/camera/flash/front_torch_flash"

	/* init camera module */
	#define INIT_MODULE_PATH "/sys/class/camera/rear/fw_update"

	namespace android {

	static int sCameraInfo[][2] = {
	#if !defined(BOARD_FRONT_CAMERA_ONLY_USE)
	{
	CAMERA_FACING_BACK,
	BACK_ROTATION, /* orientation */
	},
	#endif
	{
	CAMERA_FACING_FRONT,
	FRONT_ROTATION, /* orientation */
	}
	};

	static CameraInfo sCameraHiddenInfo[] = {
	#if defined(BOARD_SECURE_CAMERA_SUPPORT)
	{
	CAMERA_FACING_FRONT,
	FRONT_ROTATION, /* orientation */
	}
	#endif
	};

	/* This struct used in device3.3 service arbitration */
	struct CameraConfigInfo {
	int resource_cost;
	char** conflicting_devices;
	size_t conflicting_devices_length;
	};

	const CameraConfigInfo sCameraConfigInfo[] = {
	#if !defined(BOARD_FRONT_CAMERA_ONLY_USE)
	{
	51, /* resoruce_cost : [0 , 100] */
	NULL, /* conflicting_devices : NULL, (char []){"1"}, (char []){"0", "1"} */
	0, /* conflicting_devices_lenght : The length of the array in the conflicting_devices field */
	},
	#endif
	{
	51, /* resoruce_cost : [0 , 100] */
	NULL, /* conflicting_devices : NULL, (char []){"1"}, (char []){"0", "1"} */
	0, /* conflicting_devices_lenght : The length of the array in the conflicting_devices field */
	},
	{
	51, /* resoruce_cost : [0 , 100] */
	NULL, /* conflicting_devices : NULL, (char []){"1"}, (char []){"0", "1"} */
	0, /* conflicting_devices_lenght : The length of the array in the conflicting_devices field */
	},
	{
	51, /* resoruce_cost : [0 , 100] */
	NULL, /* conflicting_devices : NULL, (char []){"1"}, (char []){"0", "1"} */
	0, /* conflicting_devices_lenght : The length of the array in the conflicting_devices field */
	},
	{
	51, /* resoruce_cost : [0, 100] */
	NULL, /* conflicting_devices : NULL, (char []){"0"}, (char []){"0", "1"} */
	0, /* conflicting_devices_lenght : The length of the array in the conflicting_devices field */
	}
	};

	#ifdef USE_ONE_INTERFACE_FILE
	static camera_device_t *g_cam_device[MAX_NUM_OF_CAMERA];
	#endif
	static camera3_device_t *g_cam_device3[MAX_NUM_OF_CAMERA];
	static camera_metadata_t *g_cam_info[MAX_NUM_OF_CAMERA] = {NULL, NULL};
	static const camera_module_callbacks_t *g_callbacks = NULL;

	//ExynosCameraRequestManager *m_exynosCameraRequestManager[MAX_NUM_OF_CAMERA];
	//const camera3_callback_ops_t *callbackOps;

	static Mutex g_cam_openLock[MAX_NUM_OF_CAMERA];
	static Mutex g_cam_configLock[MAX_NUM_OF_CAMERA];
	#ifdef USE_ONE_INTERFACE_FILE
	static Mutex g_cam_previewLock[MAX_NUM_OF_CAMERA];
	static Mutex g_cam_recordingLock[MAX_NUM_OF_CAMERA];
	#endif
	static bool g_cam_torchEnabled[MAX_NUM_OF_CAMERA] = {false, false};
	pthread_t g_thread;

	static inline ExynosCamera3 obj(const struct camera3_device dev)
	{
	return reinterpret_cast<ExynosCamera3 *>(dev->priv);
	};

	static int HAL_getCameraId(int cameraId);

	/**
	* Open camera device
	*/
	static int HAL3_camera_device_open(const struct hw_module_t* module,
	const char *id,
	struct hw_device_t** device);

	/**
	* Close camera device
	*/
	static int HAL3_camera_device_close(struct hw_device_t* device);

	/**
	* initialize
	* One-time initialization to pass framework callback function pointers to the HAL.
	*/
	static int HAL3_camera_device_initialize(const struct camera3_device *dev,
	const camera3_callback_ops_t *callback_ops);

	/**
	* configure_streams
	* Reset the HAL camera device processing pipeline and set up new input and output streams.
	*/
	static int HAL3_camera_device_configure_streams(const struct camera3_device *dev,
	camera3_stream_configuration_t *stream_list);

	/**
	* register_stream_buffers
	* Register buffers for a given stream with the HAL device.
	*/
	static int HAL3_camera_device_register_stream_buffers(const struct camera3_device *dev,
	const camera3_stream_buffer_set_t *buffer_set);

	/**
	* construct_default_request_settings
	* Create capture settings for standard camera use cases.
	*/
	static const camera_metadata_t* HAL3_camera_device_construct_default_request_settings(
	const struct camera3_device *dev,
	int type);

	/**
	* process_capture_request
	* Send a new capture request to the HAL.
	*/
	static int HAL3_camera_device_process_capture_request(const struct camera3_device *dev,
	camera3_capture_request_t *request);

	/**
	* flush
	* Flush all currently in-process captures and all buffers in the pipeline on the given device.
	*/
	static int HAL3_camera_device_flush(const struct camera3_device *dev);

	/**
	* get_metadata_vendor_tag_ops
	* Get methods to query for vendor extension metadata tag information.
	*/
	static void HAL3_camera_device_get_metadata_vendor_tag_ops(const struct camera3_device *dev,
	vendor_tag_query_ops_t* ops);

	/**
	* dump
	* Print out debugging state for the camera device.
	*/
	static void HAL3_camera_device_dump(const struct camera3_device *dev, int fd);

	/**
	* Retrun the camera hardware info
	*/
	static int HAL_getCameraInfo(int camera_id, struct camera_info *info);

	/**
	* Provide callback function pointers to the HAL module to inform framework
	* of asynchronous camera module events.
	*/
	static int HAL_set_callbacks(const camera_module_callbacks_t *callbacks);

	/**
	* Return number of the camera hardware
	*/
	static int HAL_getNumberOfCameras();
	static int HAL_getNumberOfHiddenCameras();

	#ifdef USE_ONE_INTERFACE_FILE
	static inline ExynosCamera obj(struct camera_device dev)
	{
	return reinterpret_cast<ExynosCamera *>(dev->priv);
	};

	/**
	* Open camera device
	*/
	static int HAL_camera_device_open(
	const struct hw_module_t* module,
	const char *id,
	struct hw_device_t** device);

	/**
	* Close camera device
	*/
	static int HAL_camera_device_close(struct hw_device_t* device);

	/**
	* Set the preview_stream_ops to which preview frames are sent
	*/
	static int HAL_camera_device_set_preview_window(
	struct camera_device *dev,
	struct preview_stream_ops *buf);

	/**
	* Set the notification and data callbacks
	*/
	static void HAL_camera_device_set_callbacks(
	struct camera_device *dev,
	camera_notify_callback notify_cb,
	camera_data_callback data_cb,
	camera_data_timestamp_callback data_cb_timestamp,
	camera_request_memory get_memory,
	void* user);

	/**
	* The following three functions all take a msg_type, which is a bitmask of
	* the messages defined in include/ui/Camera.h
	*/

	/**
	* Enable a message, or set of messages.
	*/
	static void HAL_camera_device_enable_msg_type(
	struct camera_device *dev,
	int32_t msg_type);

	/**
	* Disable a message, or a set of messages.
	*
	* Once received a call to disableMsgType(CAMERA_MSG_VIDEO_FRAME), camera
	* HAL should not rely on its client to call releaseRecordingFrame() to
	* release video recording frames sent out by the cameral HAL before and
	* after the disableMsgType(CAMERA_MSG_VIDEO_FRAME) call. Camera HAL
	* clients must not modify/access any video recording frame after calling
	* disableMsgType(CAMERA_MSG_VIDEO_FRAME).
	*/
	static void HAL_camera_device_disable_msg_type(
	struct camera_device *dev,
	int32_t msg_type);

	/**
	* Query whether a message, or a set of messages, is enabled. Note that
	* this is operates as an AND, if any of the messages queried are off, this
	* will return false.
	*/
	static int HAL_camera_device_msg_type_enabled(
	struct camera_device *dev,
	int32_t msg_type);

	/**
	* Start preview mode.
	*/
	static int HAL_camera_device_start_preview(struct camera_device *dev);

	/**
	* Stop a previously started preview.
	*/
	static void HAL_camera_device_stop_preview(struct camera_device *dev);

	/**
	* Returns true if preview is enabled.
	*/
	static int HAL_camera_device_preview_enabled(struct camera_device *dev);

	/**
	* Request the camera HAL to store meta data or real YUV data in the video
	* buffers sent out via CAMERA_MSG_VIDEO_FRAME for a recording session. If
	* it is not called, the default camera HAL behavior is to store real YUV
	* data in the video buffers.
	*
	* This method should be called before startRecording() in order to be
	* effective.
	*
	* If meta data is stored in the video buffers, it is up to the receiver of
	* the video buffers to interpret the contents and to find the actual frame
	* data with the help of the meta data in the buffer. How this is done is
	* outside of the scope of this method.
	*
	* Some camera HALs may not support storing meta data in the video buffers,
	* but all camera HALs should support storing real YUV data in the video
	* buffers. If the camera HAL does not support storing the meta data in the
	* video buffers when it is requested to do do, INVALID_OPERATION must be
	* returned. It is very useful for the camera HAL to pass meta data rather
	* than the actual frame data directly to the video encoder, since the
	* amount of the uncompressed frame data can be very large if video size is
	* large.
	*
	* @param enable if true to instruct the camera HAL to store
	* meta data in the video buffers; false to instruct
	* the camera HAL to store real YUV data in the video
	* buffers.
	*
	* @return OK on success.
	*/
	static int HAL_camera_device_store_meta_data_in_buffers(
	struct camera_device *dev,
	int enable);

	/**
	* Start record mode. When a record image is available, a
	* CAMERA_MSG_VIDEO_FRAME message is sent with the corresponding
	* frame. Every record frame must be released by a camera HAL client via
	* releaseRecordingFrame() before the client calls
	* disableMsgType(CAMERA_MSG_VIDEO_FRAME). After the client calls
	* disableMsgType(CAMERA_MSG_VIDEO_FRAME), it is the camera HAL's
	* responsibility to manage the life-cycle of the video recording frames,
	* and the client must not modify/access any video recording frames.
	*/
	static int HAL_camera_device_start_recording(struct camera_device *dev);

	/**
	* Stop a previously started recording.
	*/
	static void HAL_camera_device_stop_recording(struct camera_device *dev);

	/**
	* Returns true if recording is enabled.
	*/
	static int HAL_camera_device_recording_enabled(struct camera_device *dev);

	/**
	* Release a record frame previously returned by CAMERA_MSG_VIDEO_FRAME.
	*
	* It is camera HAL client's responsibility to release video recording
	* frames sent out by the camera HAL before the camera HAL receives a call
	* to disableMsgType(CAMERA_MSG_VIDEO_FRAME). After it receives the call to
	* disableMsgType(CAMERA_MSG_VIDEO_FRAME), it is the camera HAL's
	* responsibility to manage the life-cycle of the video recording frames.
	*/
	static void HAL_camera_device_release_recording_frame(
	struct camera_device *dev,
	const void *opaque);

	/**
	* Start auto focus, the notification callback routine is called with
	* CAMERA_MSG_FOCUS once when focusing is complete. autoFocus() will be
	* called again if another auto focus is needed.
	*/
	static int HAL_camera_device_auto_focus(struct camera_device *dev);

	/**
	* Cancels auto-focus function. If the auto-focus is still in progress,
	* this function will cancel it. Whether the auto-focus is in progress or
	* not, this function will return the focus position to the default. If
	* the camera does not support auto-focus, this is a no-op.
	*/
	static int HAL_camera_device_cancel_auto_focus(struct camera_device *dev);

	/**
	* Take a picture.
	*/
	static int HAL_camera_device_take_picture(struct camera_device *dev);

	/**
	* Cancel a picture that was started with takePicture. Calling this method
	* when no picture is being taken is a no-op.
	*/
	static int HAL_camera_device_cancel_picture(struct camera_device *dev);

	/**
	* Set the camera parameters. This returns BAD_VALUE if any parameter is
	* invalid or not supported.
	*/
	static int HAL_camera_device_set_parameters(
	struct camera_device *dev,
	const char *parms);

	/**
	* Return the camera parameters.
	*/
	char HAL_camera_device_get_parameters(struct camera_device dev);

	/**
	* Release buffer that used by the camera parameters.
	*/
	static void HAL_camera_device_put_parameters(
	struct camera_device *dev,
	char *parms);

	/**
	* Send command to camera driver.
	*/
	static int HAL_camera_device_send_command(
	struct camera_device *dev,
	int32_t cmd,
	int32_t arg1,
	int32_t arg2);

	/**
	* Release the hardware resources owned by this object. Note that this is
	* not done in the destructor.
	*/
	static void HAL_camera_device_release(struct camera_device *dev);

	/**
	* Dump state of the camera hardware
	*/
	static int HAL_camera_device_dump(struct camera_device *dev, int fd);
	#endif

	static void HAL_get_vendor_tag_ops(vendor_tag_ops_t* ops);

	static int HAL_open_legacy(const struct hw_module_t* module, const char* id, uint32_t halVersion, struct hw_device_t** device);

	static int HAL_set_torch_mode(const char* camera_id, bool enabled);

	static int HAL_init(void);

	#ifdef USE_ONE_INTERFACE_FILE
	static camera_device_ops_t camera_device_ops = {
	SET_METHOD(set_preview_window),
	SET_METHOD(set_callbacks),
	SET_METHOD(enable_msg_type),
	SET_METHOD(disable_msg_type),
	SET_METHOD(msg_type_enabled),
	SET_METHOD(start_preview),
	SET_METHOD(stop_preview),
	SET_METHOD(preview_enabled),
	SET_METHOD(store_meta_data_in_buffers),
	SET_METHOD(start_recording),
	SET_METHOD(stop_recording),
	SET_METHOD(recording_enabled),
	SET_METHOD(release_recording_frame),
	SET_METHOD(auto_focus),
	SET_METHOD(cancel_auto_focus),
	SET_METHOD(take_picture),
	SET_METHOD(cancel_picture),
	SET_METHOD(set_parameters),
	SET_METHOD(get_parameters),
	SET_METHOD(put_parameters),
	SET_METHOD(send_command),
	SET_METHOD(release),
	SET_METHOD(dump),
	};
	#endif

	static camera3_device_ops_t camera_device3_ops = {
	SET_METHOD3(initialize),
	SET_METHOD3(configure_streams),
	NULL,
	SET_METHOD3(construct_default_request_settings),
	SET_METHOD3(process_capture_request),
	SET_METHOD3(get_metadata_vendor_tag_ops),
	SET_METHOD3(dump),
	SET_METHOD3(flush),
	{0} /* reserved for future use */
	};

	static hw_module_methods_t mCameraHwModuleMethods = {
	open : HAL3_camera_device_open
	};

	/*
	* Required HAL header.
	*/
	extern "C" {
	camera_module_t HAL_MODULE_INFO_SYM = {
	common : {
	tag : HARDWARE_MODULE_TAG,
	module_api_version : CAMERA_MODULE_API_VERSION_2_4,
	hal_api_version : HARDWARE_HAL_API_VERSION,
	id : CAMERA_HARDWARE_MODULE_ID,
	name : "Exynos Camera HAL3",
	author : "Samsung Electronics Inc",
	methods : &mCameraHwModuleMethods,
	dso : NULL,
	reserved : {0},
	},
	get_number_of_cameras : HAL_getNumberOfCameras,
	get_camera_info : HAL_getCameraInfo,
	set_callbacks : HAL_set_callbacks,
	get_vendor_tag_ops : HAL_get_vendor_tag_ops,
	open_legacy : HAL_open_legacy,
	set_torch_mode : HAL_set_torch_mode,
	init : HAL_init,
	reserved : {0},
	};
	}

	}; // namespace android
	#endif