gta4xl-common: enable all AOSP audio effects
* frameworks/av/media/libeffects/data/audio_effects.xml from android-11.0.0_r34
* Enabled preprocessing library and it's effects
Change-Id: I0b780efdc4aaf176c3b82946da2ff12e553d842c
diff --git a/config/audio/audio_effects.xml b/config/audio/audio_effects.xml
new file mode 100644
index 0000000..d80de4e
--- /dev/null
+++ b/config/audio/audio_effects.xml
@@ -0,0 +1,140 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<audio_effects_conf version="2.0" xmlns="http://schemas.android.com/audio/audio_effects_conf/v2_0">
+ <!-- List of effect libraries to load.
+ Each library element must contain a "name" attribute and a "path" attribute giving the
+ name of a library .so file in /vendor/lib/soundfx on the target
+
+ If offloadable effects are present, the AOSP library libeffectproxy.so must be listed as
+ well as one library for the SW implementation and one library for the DSP implementation:
+ <library name="proxy" path="libeffectproxy.so"/>
+ <library name="some_fx_sw" path="lib_some_fx_sw.so"/>
+ <library name="some_fx_hw" path="lib_some_fx_hw.so"/>
+
+ If the audio HAL implements support for AOSP software audio pre-processing effects,
+ the following library must be added:
+ <library name="pre_processing" path="libaudiopreprocessing.so"/>
+ -->
+ <libraries>
+ <library name="bundle" path="libbundlewrapper.so"/>
+ <library name="reverb" path="libreverbwrapper.so"/>
+ <library name="visualizer" path="libvisualizer.so"/>
+ <library name="downmix" path="libdownmix.so"/>
+ <library name="loudness_enhancer" path="libldnhncr.so"/>
+ <library name="dynamics_processing" path="libdynproc.so"/>
+ <library name="pre_processing" path="libaudiopreprocessing.so" />
+ </libraries>
+
+ <!-- list of effects to load.
+ Each "effect" element must contain a "name", "library" and a "uuid" attribute.
+ The value of the "library" element must correspond to the name of one library element in
+ the "libraries" element.
+ The "name" attribute is indicative, only the value of the "uuid" attribute designates
+ the effect.
+ The uuid is the implementation specific UUID as specified by the effect vendor. This is not
+ the generic effect type UUID.
+
+ Offloadable effects are described by an "effectProxy" element which contains one "libsw"
+ element containing the "uuid" and "library" for the SW implementation and one "libhw"
+ element containing the "uuid" and "library" for the DSP implementation.
+ The "uuid" value for the "effectProxy" element must be unique and will override the default
+ uuid in the AOSP proxy effect implementation.
+
+ If the audio HAL implements support for AOSP software audio pre-processing effects,
+ the following effects can be added:
+ <effect name="agc" library="pre_processing" uuid="aa8130e0-66fc-11e0-bad0-0002a5d5c51b"/>
+ <effect name="aec" library="pre_processing" uuid="bb392ec0-8d4d-11e0-a896-0002a5d5c51b"/>
+ <effect name="ns" library="pre_processing" uuid="c06c8400-8e06-11e0-9cb6-0002a5d5c51b"/>
+ -->
+
+ <effects>
+ <effect name="bassboost" library="bundle" uuid="8631f300-72e2-11df-b57e-0002a5d5c51b"/>
+ <effect name="virtualizer" library="bundle" uuid="1d4033c0-8557-11df-9f2d-0002a5d5c51b"/>
+ <effect name="equalizer" library="bundle" uuid="ce772f20-847d-11df-bb17-0002a5d5c51b"/>
+ <effect name="volume" library="bundle" uuid="119341a0-8469-11df-81f9-0002a5d5c51b"/>
+ <effect name="reverb_env_aux" library="reverb" uuid="4a387fc0-8ab3-11df-8bad-0002a5d5c51b"/>
+ <effect name="reverb_env_ins" library="reverb" uuid="c7a511a0-a3bb-11df-860e-0002a5d5c51b"/>
+ <effect name="reverb_pre_aux" library="reverb" uuid="f29a1400-a3bb-11df-8ddc-0002a5d5c51b"/>
+ <effect name="reverb_pre_ins" library="reverb" uuid="172cdf00-a3bc-11df-a72f-0002a5d5c51b"/>
+ <effect name="visualizer" library="visualizer" uuid="d069d9e0-8329-11df-9168-0002a5d5c51b"/>
+ <effect name="downmix" library="downmix" uuid="93f04452-e4fe-41cc-91f9-e475b6d1d69f"/>
+ <effect name="loudness_enhancer" library="loudness_enhancer" uuid="fa415329-2034-4bea-b5dc-5b381c8d1e2c"/>
+ <effect name="dynamics_processing" library="dynamics_processing" uuid="e0e6539b-1781-7261-676f-6d7573696340"/>
+ <effect name="agc" library="pre_processing" uuid="aa8130e0-66fc-11e0-bad0-0002a5d5c51b"/>
+ <effect name="aec" library="pre_processing" uuid="bb392ec0-8d4d-11e0-a896-0002a5d5c51b"/>
+ <effect name="ns" library="pre_processing" uuid="c06c8400-8e06-11e0-9cb6-0002a5d5c51b"/>
+ </effects>
+
+ <!-- Audio pre processor configurations.
+ The pre processor configuration is described in a "preprocess" element and consists in a
+ list of elements each describing pre processor settings for a given use case or "stream".
+ Each stream element has a "type" attribute corresponding to the input source used.
+ Valid types are:
+ "mic", "camcorder", "voice_recognition", "voice_communication"
+ Each "stream" element contains a list of "apply" elements indicating one effect to apply.
+ The effect to apply is designated by its name in the "effects" elements.
+
+ <preprocess>
+ <stream type="voice_communication">
+ <apply effect="aec"/>
+ <apply effect="ns"/>
+ </stream>
+ </preprocess>
+ -->
+
+ <preprocess>
+ <stream type="voice_communication">
+ <apply effect="aec"/>
+ <apply effect="ns"/>
+ </stream>
+ </preprocess>
+
+ <!-- Audio post processor configurations.
+ The post processor configuration is described in a "postprocess" element and consists in a
+ list of elements each describing post processor settings for a given use case or "stream".
+ Each stream element has a "type" attribute corresponding to the stream type used.
+ Valid types are:
+ "music", "ring", "alarm", "notification", "voice_call"
+ Each "stream" element contains a list of "apply" elements indicating one effect to apply.
+ The effect to apply is designated by its name in the "effects" elements.
+
+ <postprocess>
+ <stream type="music">
+ <apply effect="music_post_proc"/>
+ </stream>
+ <stream type="voice_call">
+ <apply effect="voice_post_proc"/>
+ </stream>
+ <stream type="notification">
+ <apply effect="notification_post_proc"/>
+ </stream>
+ </postprocess>
+ -->
+
+ <!-- Device pre/post processor configurations.
+ The device pre/post processor configuration is described in a deviceEffects element and
+ consists in a list of elements each describing pre/post proecessor settings for a given
+ device or "devicePort".
+ Each devicePort element has a "type" attribute corresponding to the device type (e.g.
+ speaker, bus), an "address" attribute corresponding to the device address and contains a
+ list of "apply" elements indicating one effect to apply.
+ If the device is a source, only pre processing effects are expected, if the
+ device is a sink, only post processing effects are expected.
+ The effect to apply is designated by its name in the "effects" elements.
+ The effect will be enabled by default and the audio framework will automatically add
+ and activate the effect if the given port is involved in an audio patch.
+ If the patch is "HW", the effect must be HW accelerated.
+
+ <deviceEffects>
+ <devicePort type="AUDIO_DEVICE_OUT_BUS" address="BUS00_USAGE_MAIN">
+ <apply effect="equalizer"/>
+ </devicePort>
+ <devicePort type="AUDIO_DEVICE_OUT_BUS" address="BUS04_USAGE_VOICE">
+ <apply effect="volume"/>
+ </devicePort>
+ <devicePort type="AUDIO_DEVICE_IN_BUILTIN_MIC" address="bottom">
+ <apply effect="agc"/>
+ </devicePort>
+ </deviceEffects>
+ -->
+
+</audio_effects_conf>
diff --git a/platform/config.mk b/platform/config.mk
index dc37b1f..2b352d9 100644
--- a/platform/config.mk
+++ b/platform/config.mk
@@ -1,5 +1,6 @@
### AUDIO
PRODUCT_COPY_FILES += \
+ $(PLATFORM_PATH)/config/audio/audio_effects.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_effects.xml \
$(PLATFORM_PATH)/config/audio/audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_configuration.xml \
$(PLATFORM_PATH)/config/audio/audio_policy_volumes.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_volumes.xml
diff --git a/proprietary-files.txt b/proprietary-files.txt
index c80e8ef..fdb52df 100644
--- a/proprietary-files.txt
+++ b/proprietary-files.txt
@@ -1,7 +1,6 @@
# Common proprietary files - from Samsung package version P610XXU2CUBB, unless pinned
### AUDIO
-vendor/etc/audio_effects.xml
vendor/etc/default_volume_tables.xml
vendor/etc/mixer_paths.xml
vendor/etc/usb_audio_policy_configuration.xml