gta4xl-common: Switch to hardware/samsung camera provider HAL
* This allows us to get rid of TARGET_SPECIFIC_HEADER_PATH
Change-Id: If7630fc11b117273cae78f26a3ba337823ac58b4
diff --git a/BoardConfigCommon.mk b/BoardConfigCommon.mk
index 9137310..d42862a 100644
--- a/BoardConfigCommon.mk
+++ b/BoardConfigCommon.mk
@@ -15,9 +15,6 @@
COMMON_PATH := device/samsung/gta4xl-common
-## Include path
-TARGET_SPECIFIC_HEADER_PATH := $(COMMON_PATH)/include
-
## Inherit proprietary vendor configuartion
include vendor/samsung/gta4xl-common/BoardConfigVendor.mk
diff --git a/common.mk b/common.mk
index 97608b4..c7744f9 100644
--- a/common.mk
+++ b/common.mk
@@ -65,7 +65,7 @@
# Camera
PRODUCT_PACKAGES += \
- android.hardware.camera.provider@2.5-service_64 \
+ android.hardware.camera.provider@2.5-service_64.samsung \
libsensorndkbridge
PRODUCT_PACKAGES += \
diff --git a/include/hardware/camera3.h b/include/hardware/camera3.h
deleted file mode 100644
index bb108f0..0000000
--- a/include/hardware/camera3.h
+++ /dev/null
@@ -1,3564 +0,0 @@
-/*
- * Copyright (C) 2013-2018 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef ANDROID_INCLUDE_CAMERA3_H
-#define ANDROID_INCLUDE_CAMERA3_H
-
-#include <system/camera_metadata.h>
-#include <hardware/camera_common.h>
-
-/**
- * Camera device HAL 3.6[ CAMERA_DEVICE_API_VERSION_3_6 ]
- *
- * This is the current recommended version of the camera device HAL.
- *
- * Supports the android.hardware.Camera API, and as of v3.2, the
- * android.hardware.camera2 API as LIMITED or above hardware level.
- *
- * Camera devices that support this version of the HAL must return
- * CAMERA_DEVICE_API_VERSION_3_6 in camera_device_t.common.version and in
- * camera_info_t.device_version (from camera_module_t.get_camera_info).
- *
- * CAMERA_DEVICE_API_VERSION_3_3 and above:
- * Camera modules that may contain version 3.3 or above devices must
- * implement at least version 2.2 of the camera module interface (as defined
- * by camera_module_t.common.module_api_version).
- *
- * CAMERA_DEVICE_API_VERSION_3_2:
- * Camera modules that may contain version 3.2 devices must implement at
- * least version 2.2 of the camera module interface (as defined by
- * camera_module_t.common.module_api_version).
- *
- * <= CAMERA_DEVICE_API_VERSION_3_1:
- * Camera modules that may contain version 3.1 (or 3.0) devices must
- * implement at least version 2.0 of the camera module interface
- * (as defined by camera_module_t.common.module_api_version).
- *
- * See camera_common.h for more versioning details.
- *
- * Documentation index:
- * S1. Version history
- * S2. Startup and operation sequencing
- * S3. Operational modes
- * S4. 3A modes and state machines
- * S5. Cropping
- * S6. Error management
- * S7. Key Performance Indicator (KPI) glossary
- * S8. Sample Use Cases
- * S9. Notes on Controls and Metadata
- * S10. Reprocessing flow and controls
- */
-
-/**
- * S1. Version history:
- *
- * 1.0: Initial Android camera HAL (Android 4.0) [camera.h]:
- *
- * - Converted from C++ CameraHardwareInterface abstraction layer.
- *
- * - Supports android.hardware.Camera API.
- *
- * 2.0: Initial release of expanded-capability HAL (Android 4.2) [camera2.h]:
- *
- * - Sufficient for implementing existing android.hardware.Camera API.
- *
- * - Allows for ZSL queue in camera service layer
- *
- * - Not tested for any new features such manual capture control, Bayer RAW
- * capture, reprocessing of RAW data.
- *
- * 3.0: First revision of expanded-capability HAL:
- *
- * - Major version change since the ABI is completely different. No change to
- * the required hardware capabilities or operational model from 2.0.
- *
- * - Reworked input request and stream queue interfaces: Framework calls into
- * HAL with next request and stream buffers already dequeued. Sync framework
- * support is included, necessary for efficient implementations.
- *
- * - Moved triggers into requests, most notifications into results.
- *
- * - Consolidated all callbacks into framework into one structure, and all
- * setup methods into a single initialize() call.
- *
- * - Made stream configuration into a single call to simplify stream
- * management. Bidirectional streams replace STREAM_FROM_STREAM construct.
- *
- * - Limited mode semantics for older/limited hardware devices.
- *
- * 3.1: Minor revision of expanded-capability HAL:
- *
- * - configure_streams passes consumer usage flags to the HAL.
- *
- * - flush call to drop all in-flight requests/buffers as fast as possible.
- *
- * 3.2: Minor revision of expanded-capability HAL:
- *
- * - Deprecates get_metadata_vendor_tag_ops. Please use get_vendor_tag_ops
- * in camera_common.h instead.
- *
- * - register_stream_buffers deprecated. All gralloc buffers provided
- * by framework to HAL in process_capture_request may be new at any time.
- *
- * - add partial result support. process_capture_result may be called
- * multiple times with a subset of the available result before the full
- * result is available.
- *
- * - add manual template to camera3_request_template. The applications may
- * use this template to control the capture settings directly.
- *
- * - Rework the bidirectional and input stream specifications.
- *
- * - change the input buffer return path. The buffer is returned in
- * process_capture_result instead of process_capture_request.
- *
- * 3.3: Minor revision of expanded-capability HAL:
- *
- * - OPAQUE and YUV reprocessing API updates.
- *
- * - Basic support for depth output buffers.
- *
- * - Addition of data_space field to camera3_stream_t.
- *
- * - Addition of rotation field to camera3_stream_t.
- *
- * - Addition of camera3 stream configuration operation mode to camera3_stream_configuration_t
- *
- * 3.4: Minor additions to supported metadata and changes to data_space support
- *
- * - Add ANDROID_SENSOR_OPAQUE_RAW_SIZE static metadata as mandatory if
- * RAW_OPAQUE format is supported.
- *
- * - Add ANDROID_CONTROL_POST_RAW_SENSITIVITY_BOOST_RANGE static metadata as
- * mandatory if any RAW format is supported
- *
- * - Switch camera3_stream_t data_space field to a more flexible definition,
- * using the version 0 definition of dataspace encoding.
- *
- * - General metadata additions which are available to use for HALv3.2 or
- * newer:
- * - ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL_3
- * - ANDROID_CONTROL_POST_RAW_SENSITIVITY_BOOST
- * - ANDROID_CONTROL_POST_RAW_SENSITIVITY_BOOST_RANGE
- * - ANDROID_SENSOR_DYNAMIC_BLACK_LEVEL
- * - ANDROID_SENSOR_DYNAMIC_WHITE_LEVEL
- * - ANDROID_SENSOR_OPAQUE_RAW_SIZE
- * - ANDROID_SENSOR_OPTICAL_BLACK_REGIONS
- *
- * 3.5: Minor revisions to support session parameters and logical multi camera:
- *
- * - Add ANDROID_REQUEST_AVAILABLE_SESSION_KEYS static metadata, which is
- * optional for implementations that want to support session parameters. If support is
- * needed, then Hal should populate the list with all available capture request keys
- * that can cause severe processing delays when modified by client. Typical examples
- * include parameters that require time-consuming HW re-configuration or internal camera
- * pipeline update.
- *
- * - Add a session parameter field to camera3_stream_configuration which can be populated
- * by clients with initial values for the keys found in ANDROID_REQUEST_AVAILABLE_SESSION_KEYS.
- *
- * - Metadata additions for logical multi camera capability:
- * - ANDROID_REQUEST_AVAILABLE_CAPABILITIES_LOGICAL_MULTI_CAMERA
- * - ANDROID_LOGICAL_MULTI_CAMERA_PHYSICAL_IDS
- * - ANDROID_LOGICAL_MULTI_CAMERA_SYNC_TYPE
- *
- * - Add physical camera id field in camera3_stream, so that for a logical
- * multi camera, the application has the option to specify which physical camera
- * a particular stream is configured on.
- *
- * - Add physical camera id and settings field in camera3_capture_request, so that
- * for a logical multi camera, the application has the option to specify individual
- * settings for a particular physical device.
- *
- * 3.6: Minor revisions to support HAL buffer management APIs:
- *
- * - Add ANDROID_INFO_SUPPORTED_BUFFER_MANAGEMENT_VERSION static metadata, which allows HAL to
- * opt in to the new buffer management APIs described below.
- *
- * - Add request_stream_buffers() and return_stream_buffers() to camera3_callback_ops_t for HAL to
- * request and return output buffers from camera service.
- *
- * - Add signal_stream_flush() to camera3_device_ops_t for camera service to notify HAL an
- * upcoming configure_streams() call requires HAL to return buffers of certain streams.
- *
- * - Add CAMERA3_JPEG_APP_SEGMENTS_BLOB_ID to support BLOB with only JPEG apps
- * segments and thumbnail (without main image bitstream). Camera framework
- * uses such stream togerther with a HAL YUV_420_888/IMPLEMENTATION_DEFINED
- * stream to encode HEIC (ISO/IEC 23008-12) image.
- *
- * - Add is_reconfiguration_required() to camera3_device_ops_t to enable HAL to skip or
- * trigger stream reconfiguration depending on new session parameter values.
- *
- */
-
-/**
- * S2. Startup and general expected operation sequence:
- *
- * 1. Framework calls camera_module_t->common.open(), which returns a
- * hardware_device_t structure.
- *
- * 2. Framework inspects the hardware_device_t->version field, and instantiates
- * the appropriate handler for that version of the camera hardware device. In
- * case the version is CAMERA_DEVICE_API_VERSION_3_0, the device is cast to
- * a camera3_device_t.
- *
- * 3. Framework calls camera3_device_t->ops->initialize() with the framework
- * callback function pointers. This will only be called this one time after
- * open(), before any other functions in the ops structure are called.
- *
- * 4. The framework calls camera3_device_t->ops->configure_streams() with a list
- * of input/output streams to the HAL device.
- *
- * 5. <= CAMERA_DEVICE_API_VERSION_3_1:
- *
- * The framework allocates gralloc buffers and calls
- * camera3_device_t->ops->register_stream_buffers() for at least one of the
- * output streams listed in configure_streams. The same stream is registered
- * only once.
- *
- * >= CAMERA_DEVICE_API_VERSION_3_2:
- *
- * camera3_device_t->ops->register_stream_buffers() is not called and must
- * be NULL.
- *
- * 6. The framework requests default settings for some number of use cases with
- * calls to camera3_device_t->ops->construct_default_request_settings(). This
- * may occur any time after step 3.
- *
- * 7. The framework constructs and sends the first capture request to the HAL,
- * with settings based on one of the sets of default settings, and with at
- * least one output stream, which has been registered earlier by the
- * framework. This is sent to the HAL with
- * camera3_device_t->ops->process_capture_request(). The HAL must block the
- * return of this call until it is ready for the next request to be sent.
- *
- * >= CAMERA_DEVICE_API_VERSION_3_2:
- *
- * The buffer_handle_t provided in the camera3_stream_buffer_t array
- * in the camera3_capture_request_t may be new and never-before-seen
- * by the HAL on any given new request.
- *
- * 8. The framework continues to submit requests, and call
- * construct_default_request_settings to get default settings buffers for
- * other use cases.
- *
- * <= CAMERA_DEVICE_API_VERSION_3_1:
- *
- * The framework may call register_stream_buffers() at this time for
- * not-yet-registered streams.
- *
- * 9. When the capture of a request begins (sensor starts exposing for the
- * capture) or processing a reprocess request begins, the HAL
- * calls camera3_callback_ops_t->notify() with the SHUTTER event, including
- * the frame number and the timestamp for start of exposure. For a reprocess
- * request, the timestamp must be the start of exposure of the input image
- * which can be looked up with android.sensor.timestamp from
- * camera3_capture_request_t.settings when process_capture_request() is
- * called.
- *
- * <= CAMERA_DEVICE_API_VERSION_3_1:
- *
- * This notify call must be made before the first call to
- * process_capture_result() for that frame number.
- *
- * >= CAMERA_DEVICE_API_VERSION_3_2:
- *
- * The camera3_callback_ops_t->notify() call with the SHUTTER event should
- * be made as early as possible since the framework will be unable to
- * deliver gralloc buffers to the application layer (for that frame) until
- * it has a valid timestamp for the start of exposure (or the input image's
- * start of exposure for a reprocess request).
- *
- * Both partial metadata results and the gralloc buffers may be sent to the
- * framework at any time before or after the SHUTTER event.
- *
- * 10. After some pipeline delay, the HAL begins to return completed captures to
- * the framework with camera3_callback_ops_t->process_capture_result(). These
- * are returned in the same order as the requests were submitted. Multiple
- * requests can be in flight at once, depending on the pipeline depth of the
- * camera HAL device.
- *
- * >= CAMERA_DEVICE_API_VERSION_3_2:
- *
- * Once a buffer is returned by process_capture_result as part of the
- * camera3_stream_buffer_t array, and the fence specified by release_fence
- * has been signaled (this is a no-op for -1 fences), the ownership of that
- * buffer is considered to be transferred back to the framework. After that,
- * the HAL must no longer retain that particular buffer, and the
- * framework may clean up the memory for it immediately.
- *
- * process_capture_result may be called multiple times for a single frame,
- * each time with a new disjoint piece of metadata and/or set of gralloc
- * buffers. The framework will accumulate these partial metadata results
- * into one result.
- *
- * In particular, it is legal for a process_capture_result to be called
- * simultaneously for both a frame N and a frame N+1 as long as the
- * above rule holds for gralloc buffers (both input and output).
- *
- * 11. After some time, the framework may stop submitting new requests, wait for
- * the existing captures to complete (all buffers filled, all results
- * returned), and then call configure_streams() again. This resets the camera
- * hardware and pipeline for a new set of input/output streams. Some streams
- * may be reused from the previous configuration; if these streams' buffers
- * had already been registered with the HAL, they will not be registered
- * again. The framework then continues from step 7, if at least one
- * registered output stream remains (otherwise, step 5 is required first).
- *
- * 12. Alternatively, the framework may call camera3_device_t->common->close()
- * to end the camera session. This may be called at any time when no other
- * calls from the framework are active, although the call may block until all
- * in-flight captures have completed (all results returned, all buffers
- * filled). After the close call returns, no more calls to the
- * camera3_callback_ops_t functions are allowed from the HAL. Once the
- * close() call is underway, the framework may not call any other HAL device
- * functions.
- *
- * 13. In case of an error or other asynchronous event, the HAL must call
- * camera3_callback_ops_t->notify() with the appropriate error/event
- * message. After returning from a fatal device-wide error notification, the
- * HAL should act as if close() had been called on it. However, the HAL must
- * either cancel or complete all outstanding captures before calling
- * notify(), so that once notify() is called with a fatal error, the
- * framework will not receive further callbacks from the device. Methods
- * besides close() should return -ENODEV or NULL after the notify() method
- * returns from a fatal error message.
- */
-
-/**
- * S3. Operational modes:
- *
- * The camera 3 HAL device can implement one of two possible operational modes;
- * limited and full. Full support is expected from new higher-end
- * devices. Limited mode has hardware requirements roughly in line with those
- * for a camera HAL device v1 implementation, and is expected from older or
- * inexpensive devices. Full is a strict superset of limited, and they share the
- * same essential operational flow, as documented above.
- *
- * The HAL must indicate its level of support with the
- * android.info.supportedHardwareLevel static metadata entry, with 0 indicating
- * limited mode, and 1 indicating full mode support.
- *
- * Roughly speaking, limited-mode devices do not allow for application control
- * of capture settings (3A control only), high-rate capture of high-resolution
- * images, raw sensor readout, or support for YUV output streams above maximum
- * recording resolution (JPEG only for large images).
- *
- * ** Details of limited mode behavior:
- *
- * - Limited-mode devices do not need to implement accurate synchronization
- * between capture request settings and the actual image data
- * captured. Instead, changes to settings may take effect some time in the
- * future, and possibly not for the same output frame for each settings
- * entry. Rapid changes in settings may result in some settings never being
- * used for a capture. However, captures that include high-resolution output
- * buffers ( > 1080p ) have to use the settings as specified (but see below
- * for processing rate).
- *
- * - Limited-mode devices do not need to support most of the
- * settings/result/static info metadata. Specifically, only the following settings
- * are expected to be consumed or produced by a limited-mode HAL device:
- *
- * android.control.aeAntibandingMode (controls and dynamic)
- * android.control.aeExposureCompensation (controls and dynamic)
- * android.control.aeLock (controls and dynamic)
- * android.control.aeMode (controls and dynamic)
- * android.control.aeRegions (controls and dynamic)
- * android.control.aeTargetFpsRange (controls and dynamic)
- * android.control.aePrecaptureTrigger (controls and dynamic)
- * android.control.afMode (controls and dynamic)
- * android.control.afRegions (controls and dynamic)
- * android.control.awbLock (controls and dynamic)
- * android.control.awbMode (controls and dynamic)
- * android.control.awbRegions (controls and dynamic)
- * android.control.captureIntent (controls and dynamic)
- * android.control.effectMode (controls and dynamic)
- * android.control.mode (controls and dynamic)
- * android.control.sceneMode (controls and dynamic)
- * android.control.videoStabilizationMode (controls and dynamic)
- * android.control.aeAvailableAntibandingModes (static)
- * android.control.aeAvailableModes (static)
- * android.control.aeAvailableTargetFpsRanges (static)
- * android.control.aeCompensationRange (static)
- * android.control.aeCompensationStep (static)
- * android.control.afAvailableModes (static)
- * android.control.availableEffects (static)
- * android.control.availableSceneModes (static)
- * android.control.availableVideoStabilizationModes (static)
- * android.control.awbAvailableModes (static)
- * android.control.maxRegions (static)
- * android.control.sceneModeOverrides (static)
- * android.control.aeState (dynamic)
- * android.control.afState (dynamic)
- * android.control.awbState (dynamic)
- *
- * android.flash.mode (controls and dynamic)
- * android.flash.info.available (static)
- *
- * android.info.supportedHardwareLevel (static)
- *
- * android.jpeg.gpsCoordinates (controls and dynamic)
- * android.jpeg.gpsProcessingMethod (controls and dynamic)
- * android.jpeg.gpsTimestamp (controls and dynamic)
- * android.jpeg.orientation (controls and dynamic)
- * android.jpeg.quality (controls and dynamic)
- * android.jpeg.thumbnailQuality (controls and dynamic)
- * android.jpeg.thumbnailSize (controls and dynamic)
- * android.jpeg.availableThumbnailSizes (static)
- * android.jpeg.maxSize (static)
- *
- * android.lens.info.minimumFocusDistance (static)
- *
- * android.request.id (controls and dynamic)
- *
- * android.scaler.cropRegion (controls and dynamic)
- * android.scaler.availableStreamConfigurations (static)
- * android.scaler.availableMinFrameDurations (static)
- * android.scaler.availableStallDurations (static)
- * android.scaler.availableMaxDigitalZoom (static)
- * android.scaler.maxDigitalZoom (static)
- * android.scaler.croppingType (static)
- *
- * android.sensor.orientation (static)
- * android.sensor.timestamp (dynamic)
- *
- * android.statistics.faceDetectMode (controls and dynamic)
- * android.statistics.info.availableFaceDetectModes (static)
- * android.statistics.faceIds (dynamic)
- * android.statistics.faceLandmarks (dynamic)
- * android.statistics.faceRectangles (dynamic)
- * android.statistics.faceScores (dynamic)
- *
- * android.sync.frameNumber (dynamic)
- * android.sync.maxLatency (static)
- *
- * - Captures in limited mode that include high-resolution (> 1080p) output
- * buffers may block in process_capture_request() until all the output buffers
- * have been filled. A full-mode HAL device must process sequences of
- * high-resolution requests at the rate indicated in the static metadata for
- * that pixel format. The HAL must still call process_capture_result() to
- * provide the output; the framework must simply be prepared for
- * process_capture_request() to block until after process_capture_result() for
- * that request completes for high-resolution captures for limited-mode
- * devices.
- *
- * - Full-mode devices must support below additional capabilities:
- * - 30fps at maximum resolution is preferred, more than 20fps is required.
- * - Per frame control (android.sync.maxLatency == PER_FRAME_CONTROL).
- * - Sensor manual control metadata. See MANUAL_SENSOR defined in
- * android.request.availableCapabilities.
- * - Post-processing manual control metadata. See MANUAL_POST_PROCESSING defined
- * in android.request.availableCapabilities.
- *
- */
-
-/**
- * S4. 3A modes and state machines:
- *
- * While the actual 3A algorithms are up to the HAL implementation, a high-level
- * state machine description is defined by the HAL interface, to allow the HAL
- * device and the framework to communicate about the current state of 3A, and to
- * trigger 3A events.
- *
- * When the device is opened, all the individual 3A states must be
- * STATE_INACTIVE. Stream configuration does not reset 3A. For example, locked
- * focus must be maintained across the configure() call.
- *
- * Triggering a 3A action involves simply setting the relevant trigger entry in
- * the settings for the next request to indicate start of trigger. For example,
- * the trigger for starting an autofocus scan is setting the entry
- * ANDROID_CONTROL_AF_TRIGGER to ANDROID_CONTROL_AF_TRIGGER_START for one
- * request, and cancelling an autofocus scan is triggered by setting
- * ANDROID_CONTROL_AF_TRIGGER to ANDROID_CONTRL_AF_TRIGGER_CANCEL. Otherwise,
- * the entry will not exist, or be set to ANDROID_CONTROL_AF_TRIGGER_IDLE. Each
- * request with a trigger entry set to a non-IDLE value will be treated as an
- * independent triggering event.
- *
- * At the top level, 3A is controlled by the ANDROID_CONTROL_MODE setting, which
- * selects between no 3A (ANDROID_CONTROL_MODE_OFF), normal AUTO mode
- * (ANDROID_CONTROL_MODE_AUTO), and using the scene mode setting
- * (ANDROID_CONTROL_USE_SCENE_MODE).
- *
- * - In OFF mode, each of the individual AE/AF/AWB modes are effectively OFF,
- * and none of the capture controls may be overridden by the 3A routines.
- *
- * - In AUTO mode, Auto-focus, auto-exposure, and auto-whitebalance all run
- * their own independent algorithms, and have their own mode, state, and
- * trigger metadata entries, as listed in the next section.
- *
- * - In USE_SCENE_MODE, the value of the ANDROID_CONTROL_SCENE_MODE entry must
- * be used to determine the behavior of 3A routines. In SCENE_MODEs other than
- * FACE_PRIORITY, the HAL must override the values of
- * ANDROId_CONTROL_AE/AWB/AF_MODE to be the mode it prefers for the selected
- * SCENE_MODE. For example, the HAL may prefer SCENE_MODE_NIGHT to use
- * CONTINUOUS_FOCUS AF mode. Any user selection of AE/AWB/AF_MODE when scene
- * must be ignored for these scene modes.
- *
- * - For SCENE_MODE_FACE_PRIORITY, the AE/AWB/AF_MODE controls work as in
- * ANDROID_CONTROL_MODE_AUTO, but the 3A routines must bias toward metering
- * and focusing on any detected faces in the scene.
- *
- * S4.1. Auto-focus settings and result entries:
- *
- * Main metadata entries:
- *
- * ANDROID_CONTROL_AF_MODE: Control for selecting the current autofocus
- * mode. Set by the framework in the request settings.
- *
- * AF_MODE_OFF: AF is disabled; the framework/app directly controls lens
- * position.
- *
- * AF_MODE_AUTO: Single-sweep autofocus. No lens movement unless AF is
- * triggered.
- *
- * AF_MODE_MACRO: Single-sweep up-close autofocus. No lens movement unless
- * AF is triggered.
- *
- * AF_MODE_CONTINUOUS_VIDEO: Smooth continuous focusing, for recording
- * video. Triggering immediately locks focus in current
- * position. Canceling resumes cotinuous focusing.
- *
- * AF_MODE_CONTINUOUS_PICTURE: Fast continuous focusing, for
- * zero-shutter-lag still capture. Triggering locks focus once currently
- * active sweep concludes. Canceling resumes continuous focusing.
- *
- * AF_MODE_EDOF: Advanced extended depth of field focusing. There is no
- * autofocus scan, so triggering one or canceling one has no effect.
- * Images are focused automatically by the HAL.
- *
- * ANDROID_CONTROL_AF_STATE: Dynamic metadata describing the current AF
- * algorithm state, reported by the HAL in the result metadata.
- *
- * AF_STATE_INACTIVE: No focusing has been done, or algorithm was
- * reset. Lens is not moving. Always the state for MODE_OFF or MODE_EDOF.
- * When the device is opened, it must start in this state.
- *
- * AF_STATE_PASSIVE_SCAN: A continuous focus algorithm is currently scanning
- * for good focus. The lens is moving.
- *
- * AF_STATE_PASSIVE_FOCUSED: A continuous focus algorithm believes it is
- * well focused. The lens is not moving. The HAL may spontaneously leave
- * this state.
- *
- * AF_STATE_PASSIVE_UNFOCUSED: A continuous focus algorithm believes it is
- * not well focused. The lens is not moving. The HAL may spontaneously
- * leave this state.
- *
- * AF_STATE_ACTIVE_SCAN: A scan triggered by the user is underway.
- *
- * AF_STATE_FOCUSED_LOCKED: The AF algorithm believes it is focused. The
- * lens is not moving.
- *
- * AF_STATE_NOT_FOCUSED_LOCKED: The AF algorithm has been unable to
- * focus. The lens is not moving.
- *
- * ANDROID_CONTROL_AF_TRIGGER: Control for starting an autofocus scan, the
- * meaning of which is mode- and state- dependent. Set by the framework in
- * the request settings.
- *
- * AF_TRIGGER_IDLE: No current trigger.
- *
- * AF_TRIGGER_START: Trigger start of AF scan. Effect is mode and state
- * dependent.
- *
- * AF_TRIGGER_CANCEL: Cancel current AF scan if any, and reset algorithm to
- * default.
- *
- * Additional metadata entries:
- *
- * ANDROID_CONTROL_AF_REGIONS: Control for selecting the regions of the FOV
- * that should be used to determine good focus. This applies to all AF
- * modes that scan for focus. Set by the framework in the request
- * settings.
- *
- * S4.2. Auto-exposure settings and result entries:
- *
- * Main metadata entries:
- *
- * ANDROID_CONTROL_AE_MODE: Control for selecting the current auto-exposure
- * mode. Set by the framework in the request settings.
- *
- * AE_MODE_OFF: Autoexposure is disabled; the user controls exposure, gain,
- * frame duration, and flash.
- *
- * AE_MODE_ON: Standard autoexposure, with flash control disabled. User may
- * set flash to fire or to torch mode.
- *
- * AE_MODE_ON_AUTO_FLASH: Standard autoexposure, with flash on at HAL's
- * discretion for precapture and still capture. User control of flash
- * disabled.
- *
- * AE_MODE_ON_ALWAYS_FLASH: Standard autoexposure, with flash always fired
- * for capture, and at HAL's discretion for precapture.. User control of
- * flash disabled.
- *
- * AE_MODE_ON_AUTO_FLASH_REDEYE: Standard autoexposure, with flash on at
- * HAL's discretion for precapture and still capture. Use a flash burst
- * at end of precapture sequence to reduce redeye in the final
- * picture. User control of flash disabled.
- *
- * ANDROID_CONTROL_AE_STATE: Dynamic metadata describing the current AE
- * algorithm state, reported by the HAL in the result metadata.
- *
- * AE_STATE_INACTIVE: Initial AE state after mode switch. When the device is
- * opened, it must start in this state.
- *
- * AE_STATE_SEARCHING: AE is not converged to a good value, and is adjusting
- * exposure parameters.
- *
- * AE_STATE_CONVERGED: AE has found good exposure values for the current
- * scene, and the exposure parameters are not changing. HAL may
- * spontaneously leave this state to search for better solution.
- *
- * AE_STATE_LOCKED: AE has been locked with the AE_LOCK control. Exposure
- * values are not changing.
- *
- * AE_STATE_FLASH_REQUIRED: The HAL has converged exposure, but believes
- * flash is required for a sufficiently bright picture. Used for
- * determining if a zero-shutter-lag frame can be used.
- *
- * AE_STATE_PRECAPTURE: The HAL is in the middle of a precapture
- * sequence. Depending on AE mode, this mode may involve firing the
- * flash for metering, or a burst of flash pulses for redeye reduction.
- *
- * ANDROID_CONTROL_AE_PRECAPTURE_TRIGGER: Control for starting a metering
- * sequence before capturing a high-quality image. Set by the framework in
- * the request settings.
- *
- * PRECAPTURE_TRIGGER_IDLE: No current trigger.
- *
- * PRECAPTURE_TRIGGER_START: Start a precapture sequence. The HAL should
- * use the subsequent requests to measure good exposure/white balance
- * for an upcoming high-resolution capture.
- *
- * Additional metadata entries:
- *
- * ANDROID_CONTROL_AE_LOCK: Control for locking AE controls to their current
- * values
- *
- * ANDROID_CONTROL_AE_EXPOSURE_COMPENSATION: Control for adjusting AE
- * algorithm target brightness point.
- *
- * ANDROID_CONTROL_AE_TARGET_FPS_RANGE: Control for selecting the target frame
- * rate range for the AE algorithm. The AE routine cannot change the frame
- * rate to be outside these bounds.
- *
- * ANDROID_CONTROL_AE_REGIONS: Control for selecting the regions of the FOV
- * that should be used to determine good exposure levels. This applies to
- * all AE modes besides OFF.
- *
- * S4.3. Auto-whitebalance settings and result entries:
- *
- * Main metadata entries:
- *
- * ANDROID_CONTROL_AWB_MODE: Control for selecting the current white-balance
- * mode.
- *
- * AWB_MODE_OFF: Auto-whitebalance is disabled. User controls color matrix.
- *
- * AWB_MODE_AUTO: Automatic white balance is enabled; 3A controls color
- * transform, possibly using more complex transforms than a simple
- * matrix.
- *
- * AWB_MODE_INCANDESCENT: Fixed white balance settings good for indoor
- * incandescent (tungsten) lighting, roughly 2700K.
- *
- * AWB_MODE_FLUORESCENT: Fixed white balance settings good for fluorescent
- * lighting, roughly 5000K.
- *
- * AWB_MODE_WARM_FLUORESCENT: Fixed white balance settings good for
- * fluorescent lighting, roughly 3000K.
- *
- * AWB_MODE_DAYLIGHT: Fixed white balance settings good for daylight,
- * roughly 5500K.
- *
- * AWB_MODE_CLOUDY_DAYLIGHT: Fixed white balance settings good for clouded
- * daylight, roughly 6500K.
- *
- * AWB_MODE_TWILIGHT: Fixed white balance settings good for
- * near-sunset/sunrise, roughly 15000K.
- *
- * AWB_MODE_SHADE: Fixed white balance settings good for areas indirectly
- * lit by the sun, roughly 7500K.
- *
- * ANDROID_CONTROL_AWB_STATE: Dynamic metadata describing the current AWB
- * algorithm state, reported by the HAL in the result metadata.
- *
- * AWB_STATE_INACTIVE: Initial AWB state after mode switch. When the device
- * is opened, it must start in this state.
- *
- * AWB_STATE_SEARCHING: AWB is not converged to a good value, and is
- * changing color adjustment parameters.
- *
- * AWB_STATE_CONVERGED: AWB has found good color adjustment values for the
- * current scene, and the parameters are not changing. HAL may
- * spontaneously leave this state to search for better solution.
- *
- * AWB_STATE_LOCKED: AWB has been locked with the AWB_LOCK control. Color
- * adjustment values are not changing.
- *
- * Additional metadata entries:
- *
- * ANDROID_CONTROL_AWB_LOCK: Control for locking AWB color adjustments to
- * their current values.
- *
- * ANDROID_CONTROL_AWB_REGIONS: Control for selecting the regions of the FOV
- * that should be used to determine good color balance. This applies only
- * to auto-WB mode.
- *
- * S4.4. General state machine transition notes
- *
- * Switching between AF, AE, or AWB modes always resets the algorithm's state
- * to INACTIVE. Similarly, switching between CONTROL_MODE or
- * CONTROL_SCENE_MODE if CONTROL_MODE == USE_SCENE_MODE resets all the
- * algorithm states to INACTIVE.
- *
- * The tables below are per-mode.
- *
- * S4.5. AF state machines
- *
- * when enabling AF or changing AF mode
- *| state | trans. cause | new state | notes |
- *+--------------------+---------------+--------------------+------------------+
- *| Any | AF mode change| INACTIVE | |
- *+--------------------+---------------+--------------------+------------------+
- *
- * mode = AF_MODE_OFF or AF_MODE_EDOF
- *| state | trans. cause | new state | notes |
- *+--------------------+---------------+--------------------+------------------+
- *| INACTIVE | | INACTIVE | Never changes |
- *+--------------------+---------------+--------------------+------------------+
- *
- * mode = AF_MODE_AUTO or AF_MODE_MACRO
- *| state | trans. cause | new state | notes |
- *+--------------------+---------------+--------------------+------------------+
- *| INACTIVE | AF_TRIGGER | ACTIVE_SCAN | Start AF sweep |
- *| | | | Lens now moving |
- *+--------------------+---------------+--------------------+------------------+
- *| ACTIVE_SCAN | AF sweep done | FOCUSED_LOCKED | If AF successful |
- *| | | | Lens now locked |
- *+--------------------+---------------+--------------------+------------------+
- *| ACTIVE_SCAN | AF sweep done | NOT_FOCUSED_LOCKED | If AF successful |
- *| | | | Lens now locked |
- *+--------------------+---------------+--------------------+------------------+
- *| ACTIVE_SCAN | AF_CANCEL | INACTIVE | Cancel/reset AF |
- *| | | | Lens now locked |
- *+--------------------+---------------+--------------------+------------------+
- *| FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Cancel/reset AF |
- *+--------------------+---------------+--------------------+------------------+
- *| FOCUSED_LOCKED | AF_TRIGGER | ACTIVE_SCAN | Start new sweep |
- *| | | | Lens now moving |
- *+--------------------+---------------+--------------------+------------------+
- *| NOT_FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Cancel/reset AF |
- *+--------------------+---------------+--------------------+------------------+
- *| NOT_FOCUSED_LOCKED | AF_TRIGGER | ACTIVE_SCAN | Start new sweep |
- *| | | | Lens now moving |
- *+--------------------+---------------+--------------------+------------------+
- *| All states | mode change | INACTIVE | |
- *+--------------------+---------------+--------------------+------------------+
- *
- * mode = AF_MODE_CONTINUOUS_VIDEO
- *| state | trans. cause | new state | notes |
- *+--------------------+---------------+--------------------+------------------+
- *| INACTIVE | HAL initiates | PASSIVE_SCAN | Start AF scan |
- *| | new scan | | Lens now moving |
- *+--------------------+---------------+--------------------+------------------+
- *| INACTIVE | AF_TRIGGER | NOT_FOCUSED_LOCKED | AF state query |
- *| | | | Lens now locked |
- *+--------------------+---------------+--------------------+------------------+
- *| PASSIVE_SCAN | HAL completes | PASSIVE_FOCUSED | End AF scan |
- *| | current scan | | Lens now locked |
- *+--------------------+---------------+--------------------+------------------+
- *| PASSIVE_SCAN | HAL fails | PASSIVE_UNFOCUSED | End AF scan |
- *| | current scan | | Lens now locked |
- *+--------------------+---------------+--------------------+------------------+
- *| PASSIVE_SCAN | AF_TRIGGER | FOCUSED_LOCKED | Immediate trans. |
- *| | | | if focus is good |
- *| | | | Lens now locked |
- *+--------------------+---------------+--------------------+------------------+
- *| PASSIVE_SCAN | AF_TRIGGER | NOT_FOCUSED_LOCKED | Immediate trans. |
- *| | | | if focus is bad |
- *| | | | Lens now locked |
- *+--------------------+---------------+--------------------+------------------+
- *| PASSIVE_SCAN | AF_CANCEL | INACTIVE | Reset lens |
- *| | | | position |
- *| | | | Lens now locked |
- *+--------------------+---------------+--------------------+------------------+
- *| PASSIVE_FOCUSED | HAL initiates | PASSIVE_SCAN | Start AF scan |
- *| | new scan | | Lens now moving |
- *+--------------------+---------------+--------------------+------------------+
- *| PASSIVE_UNFOCUSED | HAL initiates | PASSIVE_SCAN | Start AF scan |
- *| | new scan | | Lens now moving |
- *+--------------------+---------------+--------------------+------------------+
- *| PASSIVE_FOCUSED | AF_TRIGGER | FOCUSED_LOCKED | Immediate trans. |
- *| | | | Lens now locked |
- *+--------------------+---------------+--------------------+------------------+
- *| PASSIVE_UNFOCUSED | AF_TRIGGER | NOT_FOCUSED_LOCKED | Immediate trans. |
- *| | | | Lens now locked |
- *+--------------------+---------------+--------------------+------------------+
- *| FOCUSED_LOCKED | AF_TRIGGER | FOCUSED_LOCKED | No effect |
- *+--------------------+---------------+--------------------+------------------+
- *| FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Restart AF scan |
- *+--------------------+---------------+--------------------+------------------+
- *| NOT_FOCUSED_LOCKED | AF_TRIGGER | NOT_FOCUSED_LOCKED | No effect |
- *+--------------------+---------------+--------------------+------------------+
- *| NOT_FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Restart AF scan |
- *+--------------------+---------------+--------------------+------------------+
- *
- * mode = AF_MODE_CONTINUOUS_PICTURE
- *| state | trans. cause | new state | notes |
- *+--------------------+---------------+--------------------+------------------+
- *| INACTIVE | HAL initiates | PASSIVE_SCAN | Start AF scan |
- *| | new scan | | Lens now moving |
- *+--------------------+---------------+--------------------+------------------+
- *| INACTIVE | AF_TRIGGER | NOT_FOCUSED_LOCKED | AF state query |
- *| | | | Lens now locked |
- *+--------------------+---------------+--------------------+------------------+
- *| PASSIVE_SCAN | HAL completes | PASSIVE_FOCUSED | End AF scan |
- *| | current scan | | Lens now locked |
- *+--------------------+---------------+--------------------+------------------+
- *| PASSIVE_SCAN | HAL fails | PASSIVE_UNFOCUSED | End AF scan |
- *| | current scan | | Lens now locked |
- *+--------------------+---------------+--------------------+------------------+
- *| PASSIVE_SCAN | AF_TRIGGER | FOCUSED_LOCKED | Eventual trans. |
- *| | | | once focus good |
- *| | | | Lens now locked |
- *+--------------------+---------------+--------------------+------------------+
- *| PASSIVE_SCAN | AF_TRIGGER | NOT_FOCUSED_LOCKED | Eventual trans. |
- *| | | | if cannot focus |
- *| | | | Lens now locked |
- *+--------------------+---------------+--------------------+------------------+
- *| PASSIVE_SCAN | AF_CANCEL | INACTIVE | Reset lens |
- *| | | | position |
- *| | | | Lens now locked |
- *+--------------------+---------------+--------------------+------------------+
- *| PASSIVE_FOCUSED | HAL initiates | PASSIVE_SCAN | Start AF scan |
- *| | new scan | | Lens now moving |
- *+--------------------+---------------+--------------------+------------------+
- *| PASSIVE_UNFOCUSED | HAL initiates | PASSIVE_SCAN | Start AF scan |
- *| | new scan | | Lens now moving |
- *+--------------------+---------------+--------------------+------------------+
- *| PASSIVE_FOCUSED | AF_TRIGGER | FOCUSED_LOCKED | Immediate trans. |
- *| | | | Lens now locked |
- *+--------------------+---------------+--------------------+------------------+
- *| PASSIVE_UNFOCUSED | AF_TRIGGER | NOT_FOCUSED_LOCKED | Immediate trans. |
- *| | | | Lens now locked |
- *+--------------------+---------------+--------------------+------------------+
- *| FOCUSED_LOCKED | AF_TRIGGER | FOCUSED_LOCKED | No effect |
- *+--------------------+---------------+--------------------+------------------+
- *| FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Restart AF scan |
- *+--------------------+---------------+--------------------+------------------+
- *| NOT_FOCUSED_LOCKED | AF_TRIGGER | NOT_FOCUSED_LOCKED | No effect |
- *+--------------------+---------------+--------------------+------------------+
- *| NOT_FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Restart AF scan |
- *+--------------------+---------------+--------------------+------------------+
- *
- * S4.6. AE and AWB state machines
- *
- * The AE and AWB state machines are mostly identical. AE has additional
- * FLASH_REQUIRED and PRECAPTURE states. So rows below that refer to those two
- * states should be ignored for the AWB state machine.
- *
- * when enabling AE/AWB or changing AE/AWB mode
- *| state | trans. cause | new state | notes |
- *+--------------------+---------------+--------------------+------------------+
- *| Any | mode change | INACTIVE | |
- *+--------------------+---------------+--------------------+------------------+
- *
- * mode = AE_MODE_OFF / AWB mode not AUTO
- *| state | trans. cause | new state | notes |
- *+--------------------+---------------+--------------------+------------------+
- *| INACTIVE | | INACTIVE | AE/AWB disabled |
- *+--------------------+---------------+--------------------+------------------+
- *
- * mode = AE_MODE_ON_* / AWB_MODE_AUTO
- *| state | trans. cause | new state | notes |
- *+--------------------+---------------+--------------------+------------------+
- *| INACTIVE | HAL initiates | SEARCHING | |
- *| | AE/AWB scan | | |
- *+--------------------+---------------+--------------------+------------------+
- *| INACTIVE | AE/AWB_LOCK | LOCKED | values locked |
- *| | on | | |
- *+--------------------+---------------+--------------------+------------------+
- *| SEARCHING | HAL finishes | CONVERGED | good values, not |
- *| | AE/AWB scan | | changing |
- *+--------------------+---------------+--------------------+------------------+
- *| SEARCHING | HAL finishes | FLASH_REQUIRED | converged but too|
- *| | AE scan | | dark w/o flash |
- *+--------------------+---------------+--------------------+------------------+
- *| SEARCHING | AE/AWB_LOCK | LOCKED | values locked |
- *| | on | | |
- *+--------------------+---------------+--------------------+------------------+
- *| CONVERGED | HAL initiates | SEARCHING | values locked |
- *| | AE/AWB scan | | |
- *+--------------------+---------------+--------------------+------------------+
- *| CONVERGED | AE/AWB_LOCK | LOCKED | values locked |
- *| | on | | |
- *+--------------------+---------------+--------------------+------------------+
- *| FLASH_REQUIRED | HAL initiates | SEARCHING | values locked |
- *| | AE/AWB scan | | |
- *+--------------------+---------------+--------------------+------------------+
- *| FLASH_REQUIRED | AE/AWB_LOCK | LOCKED | values locked |
- *| | on | | |
- *+--------------------+---------------+--------------------+------------------+
- *| LOCKED | AE/AWB_LOCK | SEARCHING | values not good |
- *| | off | | after unlock |
- *+--------------------+---------------+--------------------+------------------+
- *| LOCKED | AE/AWB_LOCK | CONVERGED | values good |
- *| | off | | after unlock |
- *+--------------------+---------------+--------------------+------------------+
- *| LOCKED | AE_LOCK | FLASH_REQUIRED | exposure good, |
- *| | off | | but too dark |
- *+--------------------+---------------+--------------------+------------------+
- *| All AE states | PRECAPTURE_ | PRECAPTURE | Start precapture |
- *| | START | | sequence |
- *+--------------------+---------------+--------------------+------------------+
- *| PRECAPTURE | Sequence done.| CONVERGED | Ready for high- |
- *| | AE_LOCK off | | quality capture |
- *+--------------------+---------------+--------------------+------------------+
- *| PRECAPTURE | Sequence done.| LOCKED | Ready for high- |
- *| | AE_LOCK on | | quality capture |
- *+--------------------+---------------+--------------------+------------------+
- *
- */
-
-/**
- * S5. Cropping:
- *
- * Cropping of the full pixel array (for digital zoom and other use cases where
- * a smaller FOV is desirable) is communicated through the
- * ANDROID_SCALER_CROP_REGION setting. This is a per-request setting, and can
- * change on a per-request basis, which is critical for implementing smooth
- * digital zoom.
- *
- * The region is defined as a rectangle (x, y, width, height), with (x, y)
- * describing the top-left corner of the rectangle. The rectangle is defined on
- * the coordinate system of the sensor active pixel array, with (0,0) being the
- * top-left pixel of the active pixel array. Therefore, the width and height
- * cannot be larger than the dimensions reported in the
- * ANDROID_SENSOR_ACTIVE_PIXEL_ARRAY static info field. The minimum allowed
- * width and height are reported by the HAL through the
- * ANDROID_SCALER_MAX_DIGITAL_ZOOM static info field, which describes the
- * maximum supported zoom factor. Therefore, the minimum crop region width and
- * height are:
- *
- * {width, height} =
- * { floor(ANDROID_SENSOR_ACTIVE_PIXEL_ARRAY[0] /
- * ANDROID_SCALER_MAX_DIGITAL_ZOOM),
- * floor(ANDROID_SENSOR_ACTIVE_PIXEL_ARRAY[1] /
- * ANDROID_SCALER_MAX_DIGITAL_ZOOM) }
- *
- * If the crop region needs to fulfill specific requirements (for example, it
- * needs to start on even coordinates, and its width/height needs to be even),
- * the HAL must do the necessary rounding and write out the final crop region
- * used in the output result metadata. Similarly, if the HAL implements video
- * stabilization, it must adjust the result crop region to describe the region
- * actually included in the output after video stabilization is applied. In
- * general, a camera-using application must be able to determine the field of
- * view it is receiving based on the crop region, the dimensions of the image
- * sensor, and the lens focal length.
- *
- * It is assumed that the cropping is applied after raw to other color space
- * conversion. Raw streams (RAW16 and RAW_OPAQUE) don't have this conversion stage,
- * and are not croppable. Therefore, the crop region must be ignored by the HAL
- * for raw streams.
- *
- * Since the crop region applies to all non-raw streams, which may have different aspect
- * ratios than the crop region, the exact sensor region used for each stream may
- * be smaller than the crop region. Specifically, each stream should maintain
- * square pixels and its aspect ratio by minimally further cropping the defined
- * crop region. If the stream's aspect ratio is wider than the crop region, the
- * stream should be further cropped vertically, and if the stream's aspect ratio
- * is narrower than the crop region, the stream should be further cropped
- * horizontally.
- *
- * In all cases, the stream crop must be centered within the full crop region,
- * and each stream is only either cropped horizontally or vertical relative to
- * the full crop region, never both.
- *
- * For example, if two streams are defined, a 640x480 stream (4:3 aspect), and a
- * 1280x720 stream (16:9 aspect), below demonstrates the expected output regions
- * for each stream for a few sample crop regions, on a hypothetical 3 MP (2000 x
- * 1500 pixel array) sensor.
- *
- * Crop region: (500, 375, 1000, 750) (4:3 aspect ratio)
- *
- * 640x480 stream crop: (500, 375, 1000, 750) (equal to crop region)
- * 1280x720 stream crop: (500, 469, 1000, 562) (marked with =)
- *
- * 0 1000 2000
- * +---------+---------+---------+----------+
- * | Active pixel array |
- * | |
- * | |
- * + +-------------------+ + 375
- * | | | |
- * | O===================O |
- * | I 1280x720 stream I |
- * + I I + 750
- * | I I |
- * | O===================O |
- * | | | |
- * + +-------------------+ + 1125
- * | Crop region, 640x480 stream |
- * | |
- * | |
- * +---------+---------+---------+----------+ 1500
- *
- * Crop region: (500, 375, 1333, 750) (16:9 aspect ratio)
- *
- * 640x480 stream crop: (666, 375, 1000, 750) (marked with =)
- * 1280x720 stream crop: (500, 375, 1333, 750) (equal to crop region)
- *
- * 0 1000 2000
- * +---------+---------+---------+----------+
- * | Active pixel array |
- * | |
- * | |
- * + +---O==================O---+ + 375
- * | | I 640x480 stream I | |
- * | | I I | |
- * | | I I | |
- * + | I I | + 750
- * | | I I | |
- * | | I I | |
- * | | I I | |
- * + +---O==================O---+ + 1125
- * | Crop region, 1280x720 stream |
- * | |
- * | |
- * +---------+---------+---------+----------+ 1500
- *
- * Crop region: (500, 375, 750, 750) (1:1 aspect ratio)
- *
- * 640x480 stream crop: (500, 469, 750, 562) (marked with =)
- * 1280x720 stream crop: (500, 543, 750, 414) (marged with #)
- *
- * 0 1000 2000
- * +---------+---------+---------+----------+
- * | Active pixel array |
- * | |
- * | |
- * + +--------------+ + 375
- * | O==============O |
- * | ################ |
- * | # # |
- * + # # + 750
- * | # # |
- * | ################ 1280x720 |
- * | O==============O 640x480 |
- * + +--------------+ + 1125
- * | Crop region |
- * | |
- * | |
- * +---------+---------+---------+----------+ 1500
- *
- * And a final example, a 1024x1024 square aspect ratio stream instead of the
- * 480p stream:
- *
- * Crop region: (500, 375, 1000, 750) (4:3 aspect ratio)
- *
- * 1024x1024 stream crop: (625, 375, 750, 750) (marked with #)
- * 1280x720 stream crop: (500, 469, 1000, 562) (marked with =)
- *
- * 0 1000 2000
- * +---------+---------+---------+----------+
- * | Active pixel array |
- * | |
- * | 1024x1024 stream |
- * + +--###############--+ + 375
- * | | # # | |
- * | O===================O |
- * | I 1280x720 stream I |
- * + I I + 750
- * | I I |
- * | O===================O |
- * | | # # | |
- * + +--###############--+ + 1125
- * | Crop region |
- * | |
- * | |
- * +---------+---------+---------+----------+ 1500
- *
- */
-
-/**
- * S6. Error management:
- *
- * Camera HAL device ops functions that have a return value will all return
- * -ENODEV / NULL in case of a serious error. This means the device cannot
- * continue operation, and must be closed by the framework. Once this error is
- * returned by some method, or if notify() is called with ERROR_DEVICE, only
- * the close() method can be called successfully. All other methods will return
- * -ENODEV / NULL.
- *
- * If a device op is called in the wrong sequence, for example if the framework
- * calls configure_streams() is called before initialize(), the device must
- * return -ENOSYS from the call, and do nothing.
- *
- * Transient errors in image capture must be reported through notify() as follows:
- *
- * - The failure of an entire capture to occur must be reported by the HAL by
- * calling notify() with ERROR_REQUEST. Individual errors for the result
- * metadata or the output buffers must not be reported in this case.
- *
- * - If the metadata for a capture cannot be produced, but some image buffers
- * were filled, the HAL must call notify() with ERROR_RESULT.
- *
- * - If an output image buffer could not be filled, but either the metadata was
- * produced or some other buffers were filled, the HAL must call notify() with
- * ERROR_BUFFER for each failed buffer.
- *
- * In each of these transient failure cases, the HAL must still call
- * process_capture_result, with valid output and input (if an input buffer was
- * submitted) buffer_handle_t. If the result metadata could not be produced, it
- * should be NULL. If some buffers could not be filled, they must be returned with
- * process_capture_result in the error state, their release fences must be set to
- * the acquire fences passed by the framework, or -1 if they have been waited on by
- * the HAL already.
- *
- * Invalid input arguments result in -EINVAL from the appropriate methods. In
- * that case, the framework must act as if that call had never been made.
- *
- */
-
-/**
- * S7. Key Performance Indicator (KPI) glossary:
- *
- * This includes some critical definitions that are used by KPI metrics.
- *
- * Pipeline Latency:
- * For a given capture request, the duration from the framework calling
- * process_capture_request to the HAL sending capture result and all buffers
- * back by process_capture_result call. To make the Pipeline Latency measure
- * independent of frame rate, it is measured by frame count.
- *
- * For example, when frame rate is 30 (fps), the frame duration (time interval
- * between adjacent frame capture time) is 33 (ms).
- * If it takes 5 frames for framework to get the result and buffers back for
- * a given request, then the Pipeline Latency is 5 (frames), instead of
- * 5 x 33 = 165 (ms).
- *
- * The Pipeline Latency is determined by android.request.pipelineDepth and
- * android.request.pipelineMaxDepth, see their definitions for more details.
- *
- */
-
-/**
- * S8. Sample Use Cases:
- *
- * This includes some typical use case examples the camera HAL may support.
- *
- * S8.1 Zero Shutter Lag (ZSL) with CAMERA3_STREAM_BIDIRECTIONAL stream.
- *
- * For this use case, the bidirectional stream will be used by the framework as follows:
- *
- * 1. The framework includes a buffer from this stream as output buffer in a
- * request as normal.
- *
- * 2. Once the HAL device returns a filled output buffer to the framework,
- * the framework may do one of two things with the filled buffer:
- *
- * 2. a. The framework uses the filled data, and returns the now-used buffer
- * to the stream queue for reuse. This behavior exactly matches the
- * OUTPUT type of stream.
- *
- * 2. b. The framework wants to reprocess the filled data, and uses the
- * buffer as an input buffer for a request. Once the HAL device has
- * used the reprocessing buffer, it then returns it to the
- * framework. The framework then returns the now-used buffer to the
- * stream queue for reuse.
- *
- * 3. The HAL device will be given the buffer again as an output buffer for
- * a request at some future point.
- *
- * For ZSL use case, the pixel format for bidirectional stream will be
- * HAL_PIXEL_FORMAT_RAW_OPAQUE or HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED if it
- * is listed in android.scaler.availableInputOutputFormatsMap. When
- * HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED is used, the gralloc
- * usage flags for the consumer endpoint will be set to GRALLOC_USAGE_HW_CAMERA_ZSL.
- * A configuration stream list that has BIDIRECTIONAL stream used as input, will
- * usually also have a distinct OUTPUT stream to get the reprocessing data. For example,
- * for the ZSL use case, the stream list might be configured with the following:
- *
- * - A HAL_PIXEL_FORMAT_RAW_OPAQUE bidirectional stream is used
- * as input.
- * - And a HAL_PIXEL_FORMAT_BLOB (JPEG) output stream.
- *
- * S8.2 ZSL (OPAQUE) reprocessing with CAMERA3_STREAM_INPUT stream.
- *
- * CAMERA_DEVICE_API_VERSION_3_3:
- * When OPAQUE_REPROCESSING capability is supported by the camera device, the INPUT stream
- * can be used for application/framework implemented use case like Zero Shutter Lag (ZSL).
- * This kind of stream will be used by the framework as follows:
- *
- * 1. Application/framework configures an opaque (RAW or YUV based) format output stream that is
- * used to produce the ZSL output buffers. The stream pixel format will be
- * HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED.
- *
- * 2. Application/framework configures an opaque format input stream that is used to
- * send the reprocessing ZSL buffers to the HAL. The stream pixel format will
- * also be HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED.
- *
- * 3. Application/framework configures a YUV/JPEG output stream that is used to receive the
- * reprocessed data. The stream pixel format will be YCbCr_420/HAL_PIXEL_FORMAT_BLOB.
- *
- * 4. Application/framework picks a ZSL buffer from the ZSL output stream when a ZSL capture is
- * issued by the application, and sends the data back as an input buffer in a
- * reprocessing request, then sends to the HAL for reprocessing.
- *
- * 5. The HAL sends back the output YUV/JPEG result to framework.
- *
- * The HAL can select the actual opaque buffer format and configure the ISP pipeline
- * appropriately based on the HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED format and
- * the gralloc usage flag GRALLOC_USAGE_HW_CAMERA_ZSL.
-
- * S8.3 YUV reprocessing with CAMERA3_STREAM_INPUT stream.
- *
- * When YUV reprocessing is supported by the HAL, the INPUT stream
- * can be used for the YUV reprocessing use cases like lucky-shot and image fusion.
- * This kind of stream will be used by the framework as follows:
- *
- * 1. Application/framework configures an YCbCr_420 format output stream that is
- * used to produce the output buffers.
- *
- * 2. Application/framework configures an YCbCr_420 format input stream that is used to
- * send the reprocessing YUV buffers to the HAL.
- *
- * 3. Application/framework configures a YUV/JPEG output stream that is used to receive the
- * reprocessed data. The stream pixel format will be YCbCr_420/HAL_PIXEL_FORMAT_BLOB.
- *
- * 4. Application/framework processes the output buffers (could be as simple as picking
- * an output buffer directly) from the output stream when a capture is issued, and sends
- * the data back as an input buffer in a reprocessing request, then sends to the HAL
- * for reprocessing.
- *
- * 5. The HAL sends back the output YUV/JPEG result to framework.
- *
- */
-
-/**
- * S9. Notes on Controls and Metadata
- *
- * This section contains notes about the interpretation and usage of various metadata tags.
- *
- * S9.1 HIGH_QUALITY and FAST modes.
- *
- * Many camera post-processing blocks may be listed as having HIGH_QUALITY,
- * FAST, and OFF operating modes. These blocks will typically also have an
- * 'available modes' tag representing which of these operating modes are
- * available on a given device. The general policy regarding implementing
- * these modes is as follows:
- *
- * 1. Operating mode controls of hardware blocks that cannot be disabled
- * must not list OFF in their corresponding 'available modes' tags.
- *
- * 2. OFF will always be included in their corresponding 'available modes'
- * tag if it is possible to disable that hardware block.
- *
- * 3. FAST must always be included in the 'available modes' tags for all
- * post-processing blocks supported on the device. If a post-processing
- * block also has a slower and higher quality operating mode that does
- * not meet the framerate requirements for FAST mode, HIGH_QUALITY should
- * be included in the 'available modes' tag to represent this operating
- * mode.
- */
-
-/**
- * S10. Reprocessing flow and controls
- *
- * This section describes the OPAQUE and YUV reprocessing flow and controls. OPAQUE reprocessing
- * uses an opaque format that is not directly application-visible, and the application can
- * only select some of the output buffers and send back to HAL for reprocessing, while YUV
- * reprocessing gives the application opportunity to process the buffers before reprocessing.
- *
- * S8 gives the stream configurations for the typical reprocessing uses cases,
- * this section specifies the buffer flow and controls in more details.
- *
- * S10.1 OPAQUE (typically for ZSL use case) reprocessing flow and controls
- *
- * For OPAQUE reprocessing (e.g. ZSL) use case, after the application creates the specific
- * output and input streams, runtime buffer flow and controls are specified as below:
- *
- * 1. Application starts output streaming by sending repeating requests for output
- * opaque buffers and preview. The buffers are held by an application
- * maintained circular buffer. The requests are based on CAMERA3_TEMPLATE_ZERO_SHUTTER_LAG
- * capture template, which should have all necessary settings that guarantee output
- * frame rate is not slowed down relative to sensor output frame rate.
- *
- * 2. When a capture is issued, the application selects one output buffer based
- * on application buffer selection logic, e.g. good AE and AF statistics etc.
- * Application then creates an reprocess request based on the capture result associated
- * with this selected buffer. The selected output buffer is now added to this reprocess
- * request as an input buffer, the output buffer of this reprocess request should be
- * either JPEG output buffer or YUV output buffer, or both, depending on the application
- * choice.
- *
- * 3. Application then alters the reprocess settings to get best image quality. The HAL must
- * support and only support below controls if the HAL support OPAQUE_REPROCESSING capability:
- * - android.jpeg.* (if JPEG buffer is included as one of the output)
- * - android.noiseReduction.mode (change to HIGH_QUALITY if it is supported)
- * - android.edge.mode (change to HIGH_QUALITY if it is supported)
- * All other controls must be ignored by the HAL.
- * 4. HAL processed the input buffer and return the output buffers in the capture results
- * as normal.
- *
- * S10.2 YUV reprocessing flow and controls
- *
- * The YUV reprocessing buffer flow is similar as OPAQUE reprocessing, with below difference:
- *
- * 1. Application may want to have finer granularity control of the intermediate YUV images
- * (before reprocessing). For example, application may choose
- * - android.noiseReduction.mode == MINIMAL
- * to make sure the no YUV domain noise reduction has applied to the output YUV buffers,
- * then it can do its own advanced noise reduction on them. For OPAQUE reprocessing case, this
- * doesn't matter, as long as the final reprocessed image has the best quality.
- * 2. Application may modify the YUV output buffer data. For example, for image fusion use
- * case, where multiple output images are merged together to improve the signal-to-noise
- * ratio (SNR). The input buffer may be generated from multiple buffers by the application.
- * To avoid excessive amount of noise reduction and insufficient amount of edge enhancement
- * being applied to the input buffer, the application can hint the HAL how much effective
- * exposure time improvement has been done by the application, then the HAL can adjust the
- * noise reduction and edge enhancement parameters to get best reprocessed image quality.
- * Below tag can be used for this purpose:
- * - android.reprocess.effectiveExposureFactor
- * The value would be exposure time increase factor applied to the original output image,
- * for example, if there are N image merged, the exposure time increase factor would be up
- * to sqrt(N). See this tag spec for more details.
- *
- * S10.3 Reprocessing pipeline characteristics
- *
- * Reprocessing pipeline has below different characteristics comparing with normal output
- * pipeline:
- *
- * 1. The reprocessing result can be returned ahead of the pending normal output results. But
- * the FIFO ordering must be maintained for all reprocessing results. For example, there are
- * below requests (A stands for output requests, B stands for reprocessing requests)
- * being processed by the HAL:
- * A1, A2, A3, A4, B1, A5, B2, A6...
- * result of B1 can be returned before A1-A4, but result of B2 must be returned after B1.
- * 2. Single input rule: For a given reprocessing request, all output buffers must be from the
- * input buffer, rather than sensor output. For example, if a reprocess request include both
- * JPEG and preview buffers, all output buffers must be produced from the input buffer
- * included by the reprocessing request, rather than sensor. The HAL must not output preview
- * buffers from sensor, while output JPEG buffer from the input buffer.
- * 3. Input buffer will be from camera output directly (ZSL case) or indirectly(image fusion
- * case). For the case where buffer is modified, the size will remain same. The HAL can
- * notify CAMERA3_MSG_ERROR_REQUEST if buffer from unknown source is sent.
- * 4. Result as reprocessing request: The HAL can expect that a reprocessing request is a copy
- * of one of the output results with minor allowed setting changes. The HAL can notify
- * CAMERA3_MSG_ERROR_REQUEST if a request from unknown source is issued.
- * 5. Output buffers may not be used as inputs across the configure stream boundary, This is
- * because an opaque stream like the ZSL output stream may have different actual image size
- * inside of the ZSL buffer to save power and bandwidth for smaller resolution JPEG capture.
- * The HAL may notify CAMERA3_MSG_ERROR_REQUEST if this case occurs.
- * 6. HAL Reprocess requests error reporting during flush should follow the same rule specified
- * by flush() method.
- *
- */
-
-__BEGIN_DECLS
-
-struct camera3_device;
-
-/**********************************************************************
- *
- * Camera3 stream and stream buffer definitions.
- *
- * These structs and enums define the handles and contents of the input and
- * output streams connecting the HAL to various framework and application buffer
- * consumers. Each stream is backed by a gralloc buffer queue.
- *
- */
-
-/**
- * camera3_stream_type_t:
- *
- * The type of the camera stream, which defines whether the camera HAL device is
- * the producer or the consumer for that stream, and how the buffers of the
- * stream relate to the other streams.
- */
-typedef enum camera3_stream_type {
- /**
- * This stream is an output stream; the camera HAL device will be
- * responsible for filling buffers from this stream with newly captured or
- * reprocessed image data.
- */
- CAMERA3_STREAM_OUTPUT = 0,
-
- /**
- * This stream is an input stream; the camera HAL device will be responsible
- * for reading buffers from this stream and sending them through the camera
- * processing pipeline, as if the buffer was a newly captured image from the
- * imager.
- *
- * The pixel format for input stream can be any format reported by
- * android.scaler.availableInputOutputFormatsMap. The pixel format of the
- * output stream that is used to produce the reprocessing data may be any
- * format reported by android.scaler.availableStreamConfigurations. The
- * supported input/output stream combinations depends the camera device
- * capabilities, see android.scaler.availableInputOutputFormatsMap for
- * stream map details.
- *
- * This kind of stream is generally used to reprocess data into higher
- * quality images (that otherwise would cause a frame rate performance
- * loss), or to do off-line reprocessing.
- *
- * CAMERA_DEVICE_API_VERSION_3_3:
- * The typical use cases are OPAQUE (typically ZSL) and YUV reprocessing,
- * see S8.2, S8.3 and S10 for more details.
- */
- CAMERA3_STREAM_INPUT = 1,
-
- /**
- * This stream can be used for input and output. Typically, the stream is
- * used as an output stream, but occasionally one already-filled buffer may
- * be sent back to the HAL device for reprocessing.
- *
- * This kind of stream is meant generally for Zero Shutter Lag (ZSL)
- * features, where copying the captured image from the output buffer to the
- * reprocessing input buffer would be expensive. See S8.1 for more details.
- *
- * Note that the HAL will always be reprocessing data it produced.
- *
- */
- CAMERA3_STREAM_BIDIRECTIONAL = 2,
-
- /**
- * Total number of framework-defined stream types
- */
- CAMERA3_NUM_STREAM_TYPES
-
-} camera3_stream_type_t;
-
-/**
- * camera3_stream_rotation_t:
- *
- * The required counterclockwise rotation of camera stream.
- */
-typedef enum camera3_stream_rotation {
- /* No rotation */
- CAMERA3_STREAM_ROTATION_0 = 0,
-
- /* Rotate by 90 degree counterclockwise */
- CAMERA3_STREAM_ROTATION_90 = 1,
-
- /* Rotate by 180 degree counterclockwise */
- CAMERA3_STREAM_ROTATION_180 = 2,
-
- /* Rotate by 270 degree counterclockwise */
- CAMERA3_STREAM_ROTATION_270 = 3
-} camera3_stream_rotation_t;
-
-/**
- * camera3_stream_configuration_mode_t:
- *
- * This defines the general operation mode for the HAL (for a given stream configuration), where
- * modes besides NORMAL have different semantics, and usually limit the generality of the API in
- * exchange for higher performance in some particular area.
- */
-typedef enum camera3_stream_configuration_mode {
- /**
- * Normal stream configuration operation mode. This is the default camera operation mode,
- * where all semantics of HAL APIs and metadata controls apply.
- */
- CAMERA3_STREAM_CONFIGURATION_NORMAL_MODE = 0,
-
- /**
- * Special constrained high speed operation mode for devices that can not support high
- * speed output in NORMAL mode. All streams in this configuration are operating at high speed
- * mode and have different characteristics and limitations to achieve high speed output.
- * The NORMAL mode can still be used for high speed output if the HAL can support high speed
- * output while satisfying all the semantics of HAL APIs and metadata controls. It is
- * recommended for the HAL to support high speed output in NORMAL mode (by advertising the high
- * speed FPS ranges in android.control.aeAvailableTargetFpsRanges) if possible.
- *
- * This mode has below limitations/requirements:
- *
- * 1. The HAL must support up to 2 streams with sizes reported by
- * android.control.availableHighSpeedVideoConfigurations.
- * 2. In this mode, the HAL is expected to output up to 120fps or higher. This mode must
- * support the targeted FPS range and size configurations reported by
- * android.control.availableHighSpeedVideoConfigurations.
- * 3. The HAL must support HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED output stream format.
- * 4. To achieve efficient high speed streaming, the HAL may have to aggregate
- * multiple frames together and send to camera device for processing where the request
- * controls are same for all the frames in this batch (batch mode). The HAL must support
- * max batch size and the max batch size requirements defined by
- * android.control.availableHighSpeedVideoConfigurations.
- * 5. In this mode, the HAL must override aeMode, awbMode, and afMode to ON, ON, and
- * CONTINUOUS_VIDEO, respectively. All post-processing block mode controls must be
- * overridden to be FAST. Therefore, no manual control of capture and post-processing
- * parameters is possible. All other controls operate the same as when
- * android.control.mode == AUTO. This means that all other android.control.* fields
- * must continue to work, such as
- *
- * android.control.aeTargetFpsRange
- * android.control.aeExposureCompensation
- * android.control.aeLock
- * android.control.awbLock
- * android.control.effectMode
- * android.control.aeRegions
- * android.control.afRegions
- * android.control.awbRegions
- * android.control.afTrigger
- * android.control.aePrecaptureTrigger
- *
- * Outside of android.control.*, the following controls must work:
- *
- * android.flash.mode (TORCH mode only, automatic flash for still capture will not work
- * since aeMode is ON)
- * android.lens.opticalStabilizationMode (if it is supported)
- * android.scaler.cropRegion
- * android.statistics.faceDetectMode (if it is supported)
- * 6. To reduce the amount of data passed across process boundaries at
- * high frame rate, within one batch, camera framework only propagates
- * the last shutter notify and the last capture results (including partial
- * results and final result) to the app. The shutter notifies and capture
- * results for the other requests in the batch are derived by
- * the camera framework. As a result, the HAL can return empty metadata
- * except for the last result in the batch.
- *
- * For more details about high speed stream requirements, see
- * android.control.availableHighSpeedVideoConfigurations and CONSTRAINED_HIGH_SPEED_VIDEO
- * capability defined in android.request.availableCapabilities.
- *
- * This mode only needs to be supported by HALs that include CONSTRAINED_HIGH_SPEED_VIDEO in
- * the android.request.availableCapabilities static metadata.
- */
- CAMERA3_STREAM_CONFIGURATION_CONSTRAINED_HIGH_SPEED_MODE = 1,
-
- /**
- * First value for vendor-defined stream configuration modes.
- */
- CAMERA3_VENDOR_STREAM_CONFIGURATION_MODE_START = 0x8000
-} camera3_stream_configuration_mode_t;
-
-/**
- * camera3_stream_t:
- *
- * A handle to a single camera input or output stream. A stream is defined by
- * the framework by its buffer resolution and format, and additionally by the
- * HAL with the gralloc usage flags and the maximum in-flight buffer count.
- *
- * The stream structures are owned by the framework, but pointers to a
- * camera3_stream passed into the HAL by configure_streams() are valid until the
- * end of the first subsequent configure_streams() call that _does not_ include
- * that camera3_stream as an argument, or until the end of the close() call.
- *
- * All camera3_stream framework-controlled members are immutable once the
- * camera3_stream is passed into configure_streams(). The HAL may only change
- * the HAL-controlled parameters during a configure_streams() call, except for
- * the contents of the private pointer.
- *
- * If a configure_streams() call returns a non-fatal error, all active streams
- * remain valid as if configure_streams() had not been called.
- *
- * The endpoint of the stream is not visible to the camera HAL device.
- * In DEVICE_API_VERSION_3_1, this was changed to share consumer usage flags
- * on streams where the camera is a producer (OUTPUT and BIDIRECTIONAL stream
- * types) see the usage field below.
- */
-typedef struct camera3_stream {
-
- /*****
- * Set by framework before configure_streams()
- */
-
- /**
- * The type of the stream, one of the camera3_stream_type_t values.
- */
- int stream_type;
-
- /**
- * The width in pixels of the buffers in this stream
- */
- uint32_t width;
-
- /**
- * The height in pixels of the buffers in this stream
- */
- uint32_t height;
-
- /**
- * The pixel format for the buffers in this stream. Format is a value from
- * the HAL_PIXEL_FORMAT_* list in system/core/include/system/graphics.h, or
- * from device-specific headers.
- *
- * If HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED is used, then the platform
- * gralloc module will select a format based on the usage flags provided by
- * the camera device and the other endpoint of the stream.
- *
- * <= CAMERA_DEVICE_API_VERSION_3_1:
- *
- * The camera HAL device must inspect the buffers handed to it in the
- * subsequent register_stream_buffers() call to obtain the
- * implementation-specific format details, if necessary.
- *
- * >= CAMERA_DEVICE_API_VERSION_3_2:
- *
- * register_stream_buffers() won't be called by the framework, so the HAL
- * should configure the ISP and sensor pipeline based purely on the sizes,
- * usage flags, and formats for the configured streams.
- */
- int format;
-
- /*****
- * Set by HAL during configure_streams().
- */
-
- /**
- * The gralloc usage flags for this stream, as needed by the HAL. The usage
- * flags are defined in gralloc.h (GRALLOC_USAGE_*), or in device-specific
- * headers.
- *
- * For output streams, these are the HAL's producer usage flags. For input
- * streams, these are the HAL's consumer usage flags. The usage flags from
- * the producer and the consumer will be combined together and then passed
- * to the platform gralloc HAL module for allocating the gralloc buffers for
- * each stream.
- *
- * Version information:
- *
- * == CAMERA_DEVICE_API_VERSION_3_0:
- *
- * No initial value guaranteed when passed via configure_streams().
- * HAL may not use this field as input, and must write over this field
- * with its usage flags.
- *
- * >= CAMERA_DEVICE_API_VERSION_3_1:
- *
- * For stream_type OUTPUT and BIDIRECTIONAL, when passed via
- * configure_streams(), the initial value of this is the consumer's
- * usage flags. The HAL may use these consumer flags to decide stream
- * configuration.
- * For stream_type INPUT, when passed via configure_streams(), the initial
- * value of this is 0.
- * For all streams passed via configure_streams(), the HAL must write
- * over this field with its usage flags.
- *
- * From Android O, the usage flag for an output stream may be bitwise
- * combination of usage flags for multiple consumers, for the purpose of
- * sharing one camera stream between those consumers. The HAL must fail
- * configure_streams call with -EINVAL if the combined flags cannot be
- * supported due to imcompatible buffer format, dataSpace, or other hardware
- * limitations.
- */
- uint64_t usage;
-
- /**
- * The maximum number of buffers the HAL device may need to have dequeued at
- * the same time. The HAL device may not have more buffers in-flight from
- * this stream than this value.
- */
- uint32_t max_buffers;
-
- /**
- * A handle to HAL-private information for the stream. Will not be inspected
- * by the framework code.
- */
- void *priv;
-
- /**
- * A field that describes the contents of the buffer. The format and buffer
- * dimensions define the memory layout and structure of the stream buffers,
- * while dataSpace defines the meaning of the data within the buffer.
- *
- * For most formats, dataSpace defines the color space of the image data.
- * In addition, for some formats, dataSpace indicates whether image- or
- * depth-based data is requested. See system/core/include/system/graphics.h
- * for details of formats and valid dataSpace values for each format.
- *
- * Version information:
- *
- * < CAMERA_DEVICE_API_VERSION_3_3:
- *
- * Not defined and should not be accessed. dataSpace should be assumed to
- * be HAL_DATASPACE_UNKNOWN, and the appropriate color space, etc, should
- * be determined from the usage flags and the format.
- *
- * = CAMERA_DEVICE_API_VERSION_3_3:
- *
- * Always set by the camera service. HAL must use this dataSpace to
- * configure the stream to the correct colorspace, or to select between
- * color and depth outputs if supported. The dataspace values are the
- * legacy definitions in graphics.h
- *
- * >= CAMERA_DEVICE_API_VERSION_3_4:
- *
- * Always set by the camera service. HAL must use this dataSpace to
- * configure the stream to the correct colorspace, or to select between
- * color and depth outputs if supported. The dataspace values are set
- * using the V0 dataspace definitions in graphics.h
- */
- android_dataspace_t data_space;
-
- /**
- * The required output rotation of the stream, one of
- * the camera3_stream_rotation_t values. This must be inspected by HAL along
- * with stream width and height. For example, if the rotation is 90 degree
- * and the stream width and height is 720 and 1280 respectively, camera service
- * will supply buffers of size 720x1280, and HAL should capture a 1280x720 image
- * and rotate the image by 90 degree counterclockwise. The rotation field is
- * no-op when the stream type is input. Camera HAL must ignore the rotation
- * field for an input stream.
- *
- * <= CAMERA_DEVICE_API_VERSION_3_2:
- *
- * Not defined and must not be accessed. HAL must not apply any rotation
- * on output images.
- *
- * >= CAMERA_DEVICE_API_VERSION_3_3:
- *
- * Always set by camera service. HAL must inspect this field during stream
- * configuration and returns -EINVAL if HAL cannot perform such rotation.
- * HAL must always support CAMERA3_STREAM_ROTATION_0, so a
- * configure_streams() call must not fail for unsupported rotation if
- * rotation field of all streams is CAMERA3_STREAM_ROTATION_0.
- *
- */
- int rotation;
-
- /**
- * The physical camera id this stream belongs to.
- *
- * <= CAMERA_DEVICE_API_VERISON_3_4:
- *
- * Not defined and must not be accessed.
- *
- * >= CAMERA_DEVICE_API_VERISON_3_5:
- *
- * Always set by camera service. If the camera device is not a logical
- * multi camera, or if the camera is a logical multi camera but the stream
- * is not a physical output stream, this field will point to a 0-length
- * string.
- *
- * A logical multi camera is a camera device backed by multiple physical
- * cameras that are also exposed to the application. And for a logical
- * multi camera, a physical output stream is an output stream specifically
- * requested on an underlying physical camera.
- *
- * For an input stream, this field is guaranteed to be a 0-length string.
- */
- const char* physical_camera_id;
-
- /* reserved for future use */
- void *reserved[6];
-
-} camera3_stream_t;
-
-/**
- * camera3_stream_configuration_t:
- *
- * A structure of stream definitions, used by configure_streams(). This
- * structure defines all the output streams and the reprocessing input
- * stream for the current camera use case.
- */
-typedef struct camera3_stream_configuration {
- /**
- * The total number of streams requested by the framework. This includes
- * both input and output streams. The number of streams will be at least 1,
- * and there will be at least one output-capable stream.
- */
- uint32_t num_streams;
-
- /**
- * An array of camera stream pointers, defining the input/output
- * configuration for the camera HAL device.
- *
- * At most one input-capable stream may be defined (INPUT or BIDIRECTIONAL)
- * in a single configuration.
- *
- * At least one output-capable stream must be defined (OUTPUT or
- * BIDIRECTIONAL).
- */
- camera3_stream_t **streams;
-
- /**
- * >= CAMERA_DEVICE_API_VERSION_3_3:
- *
- * The operation mode of streams in this configuration, one of the value
- * defined in camera3_stream_configuration_mode_t. The HAL can use this
- * mode as an indicator to set the stream property (e.g.,
- * camera3_stream->max_buffers) appropriately. For example, if the
- * configuration is
- * CAMERA3_STREAM_CONFIGURATION_CONSTRAINED_HIGH_SPEED_MODE, the HAL may
- * want to set aside more buffers for batch mode operation (see
- * android.control.availableHighSpeedVideoConfigurations for batch mode
- * definition).
- *
- */
- uint32_t operation_mode;
-
- /**
- * >= CAMERA_DEVICE_API_VERSION_3_5:
- *
- * The session metadata buffer contains the initial values of
- * ANDROID_REQUEST_AVAILABLE_SESSION_KEYS. This field is optional
- * and camera clients can choose to ignore it, in which case it will
- * be set to NULL. If parameters are present, then Hal should examine
- * the parameter values and configure its internal camera pipeline
- * accordingly.
- */
- const camera_metadata_t *session_parameters;
-} camera3_stream_configuration_t;
-
-/**
- * camera3_buffer_status_t:
- *
- * The current status of a single stream buffer.
- */
-typedef enum camera3_buffer_status {
- /**
- * The buffer is in a normal state, and can be used after waiting on its
- * sync fence.
- */
- CAMERA3_BUFFER_STATUS_OK = 0,
-
- /**
- * The buffer does not contain valid data, and the data in it should not be
- * used. The sync fence must still be waited on before reusing the buffer.
- */
- CAMERA3_BUFFER_STATUS_ERROR = 1
-
-} camera3_buffer_status_t;
-
-/**
- * camera3_stream_buffer_t:
- *
- * A single buffer from a camera3 stream. It includes a handle to its parent
- * stream, the handle to the gralloc buffer itself, and sync fences
- *
- * The buffer does not specify whether it is to be used for input or output;
- * that is determined by its parent stream type and how the buffer is passed to
- * the HAL device.
- */
-typedef struct camera3_stream_buffer {
- /**
- * The handle of the stream this buffer is associated with
- */
- camera3_stream_t *stream;
-
- /**
- * The native handle to the buffer
- */
- buffer_handle_t *buffer;
-
- /**
- * Current state of the buffer, one of the camera3_buffer_status_t
- * values. The framework will not pass buffers to the HAL that are in an
- * error state. In case a buffer could not be filled by the HAL, it must
- * have its status set to CAMERA3_BUFFER_STATUS_ERROR when returned to the
- * framework with process_capture_result().
- */
- int status;
-
- /**
- * The acquire sync fence for this buffer. The HAL must wait on this fence
- * fd before attempting to read from or write to this buffer.
- *
- * The framework may be set to -1 to indicate that no waiting is necessary
- * for this buffer.
- *
- * When the HAL returns an output buffer to the framework with
- * process_capture_result(), the acquire_fence must be set to -1. If the HAL
- * never waits on the acquire_fence due to an error in filling a buffer,
- * when calling process_capture_result() the HAL must set the release_fence
- * of the buffer to be the acquire_fence passed to it by the framework. This
- * will allow the framework to wait on the fence before reusing the buffer.
- *
- * For input buffers, the HAL must not change the acquire_fence field during
- * the process_capture_request() call.
- *
- * >= CAMERA_DEVICE_API_VERSION_3_2:
- *
- * When the HAL returns an input buffer to the framework with
- * process_capture_result(), the acquire_fence must be set to -1. If the HAL
- * never waits on input buffer acquire fence due to an error, the sync
- * fences should be handled similarly to the way they are handled for output
- * buffers.
- */
- int acquire_fence;
-
- /**
- * The release sync fence for this buffer. The HAL must set this fence when
- * returning buffers to the framework, or write -1 to indicate that no
- * waiting is required for this buffer.
- *
- * For the output buffers, the fences must be set in the output_buffers
- * array passed to process_capture_result().
- *
- * <= CAMERA_DEVICE_API_VERSION_3_1:
- *
- * For the input buffer, the release fence must be set by the
- * process_capture_request() call.
- *
- * >= CAMERA_DEVICE_API_VERSION_3_2:
- *
- * For the input buffer, the fences must be set in the input_buffer
- * passed to process_capture_result().
- *
- * After signaling the release_fence for this buffer, the HAL
- * should not make any further attempts to access this buffer as the
- * ownership has been fully transferred back to the framework.
- *
- * If a fence of -1 was specified then the ownership of this buffer
- * is transferred back immediately upon the call of process_capture_result.
- */
- int release_fence;
-
-} camera3_stream_buffer_t;
-
-/**
- * camera3_stream_buffer_set_t:
- *
- * The complete set of gralloc buffers for a stream. This structure is given to
- * register_stream_buffers() to allow the camera HAL device to register/map/etc
- * newly allocated stream buffers.
- *
- * >= CAMERA_DEVICE_API_VERSION_3_2:
- *
- * Deprecated (and not used). In particular,
- * register_stream_buffers is also deprecated and will never be invoked.
- *
- */
-typedef struct camera3_stream_buffer_set {
- /**
- * The stream handle for the stream these buffers belong to
- */
- camera3_stream_t *stream;
-
- /**
- * The number of buffers in this stream. It is guaranteed to be at least
- * stream->max_buffers.
- */
- uint32_t num_buffers;
-
- /**
- * The array of gralloc buffer handles for this stream. If the stream format
- * is set to HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED, the camera HAL device
- * should inspect the passed-in buffers to determine any platform-private
- * pixel format information.
- */
- buffer_handle_t **buffers;
-
-} camera3_stream_buffer_set_t;
-
-/**
- * camera3_jpeg_blob:
- *
- * Transport header for compressed JPEG or JPEG_APP_SEGMENTS buffers in output streams.
- *
- * To capture JPEG or JPEG_APP_SEGMENTS images, a stream is created using the pixel format
- * HAL_PIXEL_FORMAT_BLOB. The buffer size for the stream is calculated by the
- * framework, based on the static metadata field android.jpeg.maxSize for JPEG,
- * and android.jpeg.maxAppsSegments for JPEG_APP_SEGMENTS.
- *
- * Since compressed JPEG/JPEG_APP_SEGMENTS images are of variable size, the HAL needs to
- * include the final size of the image using this structure inside the output
- * stream buffer. The JPEG blob ID field must be set to CAMERA3_JPEG_BLOB_ID for
- * JPEG and CAMERA3_JPEG_APP_SEGMENTS_BLOB_ID for APP segments.
- *
- * Transport header should be at the end of the output stream buffer. That
- * means the jpeg_blob_id must start at byte[buffer_size -
- * sizeof(camera3_jpeg_blob)], where the buffer_size is the size of gralloc buffer.
- * The blob data itself starts at the beginning of the buffer and should be
- * jpeg_size bytes long. HAL using this transport header for JPEG must account for
- * it in android.jpeg.maxSize. For JPEG APP segments, camera framework makes
- * sure that the output stream buffer is large enough for the transport header.
- */
-typedef struct camera3_jpeg_blob {
- uint16_t jpeg_blob_id;
- uint32_t jpeg_size;
-} camera3_jpeg_blob_t;
-
-enum {
- CAMERA3_JPEG_BLOB_ID = 0x00FF,
- CAMERA3_JPEG_APP_SEGMENTS_BLOB_ID = 0x0100,
-};
-
-/**********************************************************************
- *
- * Message definitions for the HAL notify() callback.
- *
- * These definitions are used for the HAL notify callback, to signal
- * asynchronous events from the HAL device to the Android framework.
- *
- */
-
-/**
- * camera3_msg_type:
- *
- * Indicates the type of message sent, which specifies which member of the
- * message union is valid.
- *
- */
-typedef enum camera3_msg_type {
- /**
- * An error has occurred. camera3_notify_msg.message.error contains the
- * error information.
- */
- CAMERA3_MSG_ERROR = 1,
-
- /**
- * The exposure of a given request or processing a reprocess request has
- * begun. camera3_notify_msg.message.shutter contains the information
- * the capture.
- */
- CAMERA3_MSG_SHUTTER = 2,
-
- /**
- * Number of framework message types
- */
- CAMERA3_NUM_MESSAGES
-
-} camera3_msg_type_t;
-
-/**
- * Defined error codes for CAMERA_MSG_ERROR
- */
-typedef enum camera3_error_msg_code {
- /**
- * A serious failure occured. No further frames or buffer streams will
- * be produced by the device. Device should be treated as closed. The
- * client must reopen the device to use it again. The frame_number field
- * is unused.
- */
- CAMERA3_MSG_ERROR_DEVICE = 1,
-
- /**
- * An error has occurred in processing a request. No output (metadata or
- * buffers) will be produced for this request. The frame_number field
- * specifies which request has been dropped. Subsequent requests are
- * unaffected, and the device remains operational.
- */
- CAMERA3_MSG_ERROR_REQUEST = 2,
-
- /**
- * An error has occurred in producing an output result metadata buffer
- * for a request, but output stream buffers for it will still be
- * available. Subsequent requests are unaffected, and the device remains
- * operational. The frame_number field specifies the request for which
- * result metadata won't be available.
- *
- * >= CAMERA_DEVICE_API_VERSION_3_6:
- *
- * In case the result metadata is absent for a logical camera device, then the
- * error_stream pointer must be set to NULL.
- * If the result metadata cannot be produced for a physical camera device, then
- * error_stream must contain a pointer to a respective stream associated with
- * that physical device.
- */
- CAMERA3_MSG_ERROR_RESULT = 3,
-
- /**
- * An error has occurred in placing an output buffer into a stream for a
- * request. The frame metadata and other buffers may still be
- * available. Subsequent requests are unaffected, and the device remains
- * operational. The frame_number field specifies the request for which the
- * buffer was dropped, and error_stream contains a pointer to the stream
- * that dropped the frame.
- */
- CAMERA3_MSG_ERROR_BUFFER = 4,
-
- /**
- * Number of error types
- */
- CAMERA3_MSG_NUM_ERRORS
-
-} camera3_error_msg_code_t;
-
-/**
- * camera3_error_msg_t:
- *
- * Message contents for CAMERA3_MSG_ERROR
- */
-typedef struct camera3_error_msg {
- /**
- * Frame number of the request the error applies to. 0 if the frame number
- * isn't applicable to the error.
- */
- uint32_t frame_number;
-
- /**
- * Pointer to the stream that had a failure. NULL if the stream isn't
- * applicable to the error.
- */
- camera3_stream_t *error_stream;
-
- /**
- * The code for this error; one of the CAMERA_MSG_ERROR enum values.
- */
- int error_code;
-
-} camera3_error_msg_t;
-
-/**
- * camera3_shutter_msg_t:
- *
- * Message contents for CAMERA3_MSG_SHUTTER
- */
-typedef struct camera3_shutter_msg {
- /**
- * Frame number of the request that has begun exposure or reprocessing.
- */
- uint32_t frame_number;
-
- /**
- * Timestamp for the start of capture. For a reprocess request, this must
- * be input image's start of capture. This must match the capture result
- * metadata's sensor exposure start timestamp.
- */
- uint64_t timestamp;
-
-} camera3_shutter_msg_t;
-
-/**
- * camera3_notify_msg_t:
- *
- * The message structure sent to camera3_callback_ops_t.notify()
- */
-typedef struct camera3_notify_msg {
-
- /**
- * The message type. One of camera3_notify_msg_type, or a private extension.
- */
- int type;
-
- union {
- /**
- * Error message contents. Valid if type is CAMERA3_MSG_ERROR
- */
- camera3_error_msg_t error;
-
- /**
- * Shutter message contents. Valid if type is CAMERA3_MSG_SHUTTER
- */
- camera3_shutter_msg_t shutter;
-
- /**
- * Generic message contents. Used to ensure a minimum size for custom
- * message types.
- */
- uint8_t generic[32];
- } message;
-
-} camera3_notify_msg_t;
-
-
-/**********************************************************************
- *
- * Types definition for request_stream_buffers() callback.
- *
- */
-
-/**
- * camera3_buffer_request_status_t:
- *
- * The overall buffer request status returned by request_stream_buffers()
- */
-typedef enum camera3_buffer_request_status {
- /**
- * request_stream_buffers() call succeeded and all requested buffers are
- * returned.
- */
- CAMERA3_BUF_REQ_OK = 0,
-
- /**
- * request_stream_buffers() call failed for some streams.
- * Check per stream status for each returned camera3_stream_buffer_ret_t.
- */
- CAMERA3_BUF_REQ_FAILED_PARTIAL = 1,
-
- /**
- * request_stream_buffers() call failed for all streams and no buffers are
- * returned at all. Camera service is about to or is performing
- * configure_streams() call. HAL must wait until next configure_streams()
- * call is finished before requesting buffers again.
- */
- CAMERA3_BUF_REQ_FAILED_CONFIGURING = 2,
-
- /**
- * request_stream_buffers() call failed for all streams and no buffers are
- * returned at all. Failure due to bad camera3_buffer_request input, eg:
- * unknown stream or repeated stream in the list of buffer requests.
- */
- CAMERA3_BUF_REQ_FAILED_ILLEGAL_ARGUMENTS = 3,
-
- /**
- * request_stream_buffers() call failed for all streams and no buffers are
- * returned at all. This can happen for unknown reasons or a combination
- * of different failure reasons per stream. For the latter case, caller can
- * check per stream failure reason returned in camera3_stream_buffer_ret.
- */
- CAMERA3_BUF_REQ_FAILED_UNKNOWN = 4,
-
- /**
- * Number of buffer request status
- */
- CAMERA3_BUF_REQ_NUM_STATUS
-
-} camera3_buffer_request_status_t;
-
-/**
- * camera3_stream_buffer_req_status_t:
- *
- * The per stream buffer request status returned by request_stream_buffers()
- */
-typedef enum camera3_stream_buffer_req_status {
- /**
- * Get buffer succeeds and all requested buffers are returned.
- */
- CAMERA3_PS_BUF_REQ_OK = 0,
-
- /**
- * Get buffer failed due to timeout waiting for an available buffer. This is
- * likely due to the client application holding too many buffers, or the
- * system is under memory pressure.
- * This is not a fatal error. HAL can try to request buffer for this stream
- * later. If HAL cannot get a buffer for certain capture request in time
- * due to this error, HAL can send an ERROR_REQUEST to camera service and
- * drop processing that request.
- */
- CAMERA3_PS_BUF_REQ_NO_BUFFER_AVAILABLE = 1,
-
- /**
- * Get buffer failed due to HAL has reached its maxBuffer count. This is not
- * a fatal error. HAL can try to request buffer for this stream again after
- * it returns at least one buffer of that stream to camera service.
- */
- CAMERA3_PS_BUF_REQ_MAX_BUFFER_EXCEEDED = 2,
-
- /**
- * Get buffer failed due to the stream is disconnected by client
- * application, has been removed, or not recognized by camera service.
- * This means application is no longer interested in this stream.
- * Requesting buffer for this stream will never succeed after this error is
- * returned. HAL must safely return all buffers of this stream after
- * getting this error. If HAL gets another capture request later targeting
- * a disconnected stream, HAL must send an ERROR_REQUEST to camera service
- * and drop processing that request.
- */
- CAMERA3_PS_BUF_REQ_STREAM_DISCONNECTED = 3,
-
- /**
- * Get buffer failed for unknown reason. This is a fatal error and HAL must
- * send ERROR_DEVICE to camera service and be ready to be closed.
- */
- CAMERA3_PS_BUF_REQ_UNKNOWN_ERROR = 4,
-
- /**
- * Number of buffer request status
- */
- CAMERA3_PS_BUF_REQ_NUM_STATUS
-} camera3_stream_buffer_req_status_t;
-
-typedef struct camera3_buffer_request {
- /**
- * The stream HAL wants to request buffer from
- */
- camera3_stream_t *stream;
-
- /**
- * The number of buffers HAL requested
- */
- uint32_t num_buffers_requested;
-} camera3_buffer_request_t;
-
-typedef struct camera3_stream_buffer_ret {
- /**
- * The stream HAL wants to request buffer from
- */
- camera3_stream_t *stream;
-
- /**
- * The status of buffer request of this stream
- */
- camera3_stream_buffer_req_status_t status;
-
- /**
- * Number of output buffers returned. Must be 0 when above status is not
- * CAMERA3_PS_BUF_REQ_OK; otherwise the value must be equal to
- * num_buffers_requested in the corresponding camera3_buffer_request_t
- */
- uint32_t num_output_buffers;
-
- /**
- * The returned output buffers for the stream.
- * Caller of request_stream_buffers() should supply this with enough memory
- * (num_buffers_requested * sizeof(camera3_stream_buffer_t))
- */
- camera3_stream_buffer_t *output_buffers;
-} camera3_stream_buffer_ret_t;
-
-
-/**********************************************************************
- *
- * Capture request/result definitions for the HAL process_capture_request()
- * method, and the process_capture_result() callback.
- *
- */
-
-/**
- * camera3_request_template_t:
- *
- * Available template types for
- * camera3_device_ops.construct_default_request_settings()
- */
-typedef enum camera3_request_template {
- /**
- * Standard camera preview operation with 3A on auto.
- */
- CAMERA3_TEMPLATE_PREVIEW = 1,
-
- /**
- * Standard camera high-quality still capture with 3A and flash on auto.
- */
- CAMERA3_TEMPLATE_STILL_CAPTURE = 2,
-
- /**
- * Standard video recording plus preview with 3A on auto, torch off.
- */
- CAMERA3_TEMPLATE_VIDEO_RECORD = 3,
-
- /**
- * High-quality still capture while recording video. Application will
- * include preview, video record, and full-resolution YUV or JPEG streams in
- * request. Must not cause stuttering on video stream. 3A on auto.
- */
- CAMERA3_TEMPLATE_VIDEO_SNAPSHOT = 4,
-
- /**
- * Zero-shutter-lag mode. Application will request preview and
- * full-resolution data for each frame, and reprocess it to JPEG when a
- * still image is requested by user. Settings should provide highest-quality
- * full-resolution images without compromising preview frame rate. 3A on
- * auto.
- */
- CAMERA3_TEMPLATE_ZERO_SHUTTER_LAG = 5,
-
- /**
- * A basic template for direct application control of capture
- * parameters. All automatic control is disabled (auto-exposure, auto-white
- * balance, auto-focus), and post-processing parameters are set to preview
- * quality. The manual capture parameters (exposure, sensitivity, etc.)
- * are set to reasonable defaults, but should be overridden by the
- * application depending on the intended use case.
- */
- CAMERA3_TEMPLATE_MANUAL = 6,
-
- /* Total number of templates */
- CAMERA3_TEMPLATE_COUNT,
-
- /**
- * First value for vendor-defined request templates
- */
- CAMERA3_VENDOR_TEMPLATE_START = 0x40000000
-
-} camera3_request_template_t;
-
-/**
- * camera3_capture_request_t:
- *
- * A single request for image capture/buffer reprocessing, sent to the Camera
- * HAL device by the framework in process_capture_request().
- *
- * The request contains the settings to be used for this capture, and the set of
- * output buffers to write the resulting image data in. It may optionally
- * contain an input buffer, in which case the request is for reprocessing that
- * input buffer instead of capturing a new image with the camera sensor. The
- * capture is identified by the frame_number.
- *
- * In response, the camera HAL device must send a camera3_capture_result
- * structure asynchronously to the framework, using the process_capture_result()
- * callback.
- */
-typedef struct camera3_capture_request {
- /**
- * The frame number is an incrementing integer set by the framework to
- * uniquely identify this capture. It needs to be returned in the result
- * call, and is also used to identify the request in asynchronous
- * notifications sent to camera3_callback_ops_t.notify().
- */
- uint32_t frame_number;
-
- /**
- * The settings buffer contains the capture and processing parameters for
- * the request. As a special case, a NULL settings buffer indicates that the
- * settings are identical to the most-recently submitted capture request. A
- * NULL buffer cannot be used as the first submitted request after a
- * configure_streams() call.
- */
- const camera_metadata_t *settings;
-
- /**
- * The input stream buffer to use for this request, if any.
- *
- * If input_buffer is NULL, then the request is for a new capture from the
- * imager. If input_buffer is valid, the request is for reprocessing the
- * image contained in input_buffer.
- *
- * In the latter case, the HAL must set the release_fence of the
- * input_buffer to a valid sync fence, or to -1 if the HAL does not support
- * sync, before process_capture_request() returns.
- *
- * The HAL is required to wait on the acquire sync fence of the input buffer
- * before accessing it.
- *
- * <= CAMERA_DEVICE_API_VERSION_3_1:
- *
- * Any input buffer included here will have been registered with the HAL
- * through register_stream_buffers() before its inclusion in a request.
- *
- * >= CAMERA_DEVICE_API_VERSION_3_2:
- *
- * The buffers will not have been pre-registered with the HAL.
- * Subsequent requests may reuse buffers, or provide entirely new buffers.
- */
- camera3_stream_buffer_t *input_buffer;
-
- /**
- * The number of output buffers for this capture request. Must be at least
- * 1.
- */
- uint32_t num_output_buffers;
-
- /**
- * An array of num_output_buffers stream buffers, to be filled with image
- * data from this capture/reprocess. The HAL must wait on the acquire fences
- * of each stream buffer before writing to them.
- *
- * The HAL takes ownership of the actual buffer_handle_t entries in
- * output_buffers; the framework does not access them until they are
- * returned in a camera3_capture_result_t.
- *
- * <= CAMERA_DEVICE_API_VERSION_3_1:
- *
- * All the buffers included here will have been registered with the HAL
- * through register_stream_buffers() before their inclusion in a request.
- *
- * >= CAMERA_DEVICE_API_VERSION_3_2:
- *
- * Any or all of the buffers included here may be brand new in this
- * request (having never before seen by the HAL).
- */
- const camera3_stream_buffer_t *output_buffers;
-
- /**
- * <= CAMERA_DEVICE_API_VERISON_3_4:
- *
- * Not defined and must not be accessed.
- *
- * >= CAMERA_DEVICE_API_VERSION_3_5:
- * The number of physical camera settings to be applied. If 'num_physcam_settings'
- * equals 0 or a physical device is not included, then Hal must decide the
- * specific physical device settings based on the default 'settings'.
- */
- uint32_t num_physcam_settings;
-
- /**
- * <= CAMERA_DEVICE_API_VERISON_3_4:
- *
- * Not defined and must not be accessed.
- *
- * >= CAMERA_DEVICE_API_VERSION_3_5:
- * The physical camera ids. The array will contain 'num_physcam_settings'
- * camera id strings for all physical devices that have specific settings.
- * In case some id is invalid, the process capture request must fail and return
- * -EINVAL.
- */
- const char **physcam_id;
-
- /**
- * <= CAMERA_DEVICE_API_VERISON_3_4:
- *
- * Not defined and must not be accessed.
- *
- * >= CAMERA_DEVICE_API_VERSION_3_5:
- * The capture settings for the physical cameras. The array will contain
- * 'num_physcam_settings' settings for invididual physical devices. In
- * case the settings at some particular index are empty, the process capture
- * request must fail and return -EINVAL.
- */
- const camera_metadata_t **physcam_settings;
-
-} camera3_capture_request_t;
-
-/**
- * camera3_capture_result_t:
- *
- * The result of a single capture/reprocess by the camera HAL device. This is
- * sent to the framework asynchronously with process_capture_result(), in
- * response to a single capture request sent to the HAL with
- * process_capture_request(). Multiple process_capture_result() calls may be
- * performed by the HAL for each request.
- *
- * Each call, all with the same frame
- * number, may contain some subset of the output buffers, and/or the result
- * metadata. The metadata may only be provided once for a given frame number;
- * all other calls must set the result metadata to NULL.
- *
- * The result structure contains the output metadata from this capture, and the
- * set of output buffers that have been/will be filled for this capture. Each
- * output buffer may come with a release sync fence that the framework will wait
- * on before reading, in case the buffer has not yet been filled by the HAL.
- *
- * >= CAMERA_DEVICE_API_VERSION_3_2:
- *
- * The metadata may be provided multiple times for a single frame number. The
- * framework will accumulate together the final result set by combining each
- * partial result together into the total result set.
- *
- * If an input buffer is given in a request, the HAL must return it in one of
- * the process_capture_result calls, and the call may be to just return the input
- * buffer, without metadata and output buffers; the sync fences must be handled
- * the same way they are done for output buffers.
- *
- *
- * Performance considerations:
- *
- * Applications will also receive these partial results immediately, so sending
- * partial results is a highly recommended performance optimization to avoid
- * the total pipeline latency before sending the results for what is known very
- * early on in the pipeline.
- *
- * A typical use case might be calculating the AF state halfway through the
- * pipeline; by sending the state back to the framework immediately, we get a
- * 50% performance increase and perceived responsiveness of the auto-focus.
- *
- */
-typedef struct camera3_capture_result {
- /**
- * The frame number is an incrementing integer set by the framework in the
- * submitted request to uniquely identify this capture. It is also used to
- * identify the request in asynchronous notifications sent to
- * camera3_callback_ops_t.notify().
- */
- uint32_t frame_number;
-
- /**
- * The result metadata for this capture. This contains information about the
- * final capture parameters, the state of the capture and post-processing
- * hardware, the state of the 3A algorithms, if enabled, and the output of
- * any enabled statistics units.
- *
- * Only one call to process_capture_result() with a given frame_number may
- * include the result metadata. All other calls for the same frame_number
- * must set this to NULL.
- *
- * If there was an error producing the result metadata, result must be an
- * empty metadata buffer, and notify() must be called with ERROR_RESULT.
- *
- * >= CAMERA_DEVICE_API_VERSION_3_2:
- *
- * Multiple calls to process_capture_result() with a given frame_number
- * may include the result metadata.
- *
- * Partial metadata submitted should not include any metadata key returned
- * in a previous partial result for a given frame. Each new partial result
- * for that frame must also set a distinct partial_result value.
- *
- * If notify has been called with ERROR_RESULT, all further partial
- * results for that frame are ignored by the framework.
- */
- const camera_metadata_t *result;
-
- /**
- * The number of output buffers returned in this result structure. Must be
- * less than or equal to the matching capture request's count. If this is
- * less than the buffer count in the capture request, at least one more call
- * to process_capture_result with the same frame_number must be made, to
- * return the remaining output buffers to the framework. This may only be
- * zero if the structure includes valid result metadata or an input buffer
- * is returned in this result.
- */
- uint32_t num_output_buffers;
-
- /**
- * The handles for the output stream buffers for this capture. They may not
- * yet be filled at the time the HAL calls process_capture_result(); the
- * framework will wait on the release sync fences provided by the HAL before
- * reading the buffers.
- *
- * The HAL must set the stream buffer's release sync fence to a valid sync
- * fd, or to -1 if the buffer has already been filled.
- *
- * If the HAL encounters an error while processing the buffer, and the
- * buffer is not filled, the buffer's status field must be set to
- * CAMERA3_BUFFER_STATUS_ERROR. If the HAL did not wait on the acquire fence
- * before encountering the error, the acquire fence should be copied into
- * the release fence, to allow the framework to wait on the fence before
- * reusing the buffer.
- *
- * The acquire fence must be set to -1 for all output buffers. If
- * num_output_buffers is zero, this may be NULL. In that case, at least one
- * more process_capture_result call must be made by the HAL to provide the
- * output buffers.
- *
- * When process_capture_result is called with a new buffer for a frame,
- * all previous frames' buffers for that corresponding stream must have been
- * already delivered (the fences need not have yet been signaled).
- *
- * >= CAMERA_DEVICE_API_VERSION_3_2:
- *
- * Gralloc buffers for a frame may be sent to framework before the
- * corresponding SHUTTER-notify.
- *
- * Performance considerations:
- *
- * Buffers delivered to the framework will not be dispatched to the
- * application layer until a start of exposure timestamp has been received
- * via a SHUTTER notify() call. It is highly recommended to
- * dispatch that call as early as possible.
- */
- const camera3_stream_buffer_t *output_buffers;
-
- /**
- * >= CAMERA_DEVICE_API_VERSION_3_2:
- *
- * The handle for the input stream buffer for this capture. It may not
- * yet be consumed at the time the HAL calls process_capture_result(); the
- * framework will wait on the release sync fences provided by the HAL before
- * reusing the buffer.
- *
- * The HAL should handle the sync fences the same way they are done for
- * output_buffers.
- *
- * Only one input buffer is allowed to be sent per request. Similarly to
- * output buffers, the ordering of returned input buffers must be
- * maintained by the HAL.
- *
- * Performance considerations:
- *
- * The input buffer should be returned as early as possible. If the HAL
- * supports sync fences, it can call process_capture_result to hand it back
- * with sync fences being set appropriately. If the sync fences are not
- * supported, the buffer can only be returned when it is consumed, which
- * may take long time; the HAL may choose to copy this input buffer to make
- * the buffer return sooner.
- */
- const camera3_stream_buffer_t *input_buffer;
-
- /**
- * >= CAMERA_DEVICE_API_VERSION_3_2:
- *
- * In order to take advantage of partial results, the HAL must set the
- * static metadata android.request.partialResultCount to the number of
- * partial results it will send for each frame.
- *
- * Each new capture result with a partial result must set
- * this field (partial_result) to a distinct inclusive value between
- * 1 and android.request.partialResultCount.
- *
- * HALs not wishing to take advantage of this feature must not
- * set an android.request.partialResultCount or partial_result to a value
- * other than 1.
- *
- * This value must be set to 0 when a capture result contains buffers only
- * and no metadata.
- */
- uint32_t partial_result;
-
- /**
- * >= CAMERA_DEVICE_API_VERSION_3_5:
- *
- * Specifies the number of physical camera metadata this capture result
- * contains. It must be equal to the number of physical cameras being
- * requested from.
- *
- * If the current camera device is not a logical multi-camera, or the
- * corresponding capture_request doesn't request on any physical camera,
- * this field must be 0.
- */
- uint32_t num_physcam_metadata;
-
- /**
- * >= CAMERA_DEVICE_API_VERSION_3_5:
- *
- * An array of strings containing the physical camera ids for the returned
- * physical camera metadata. The length of the array is
- * num_physcam_metadata.
- */
- const char **physcam_ids;
-
- /**
- * >= CAMERA_DEVICE_API_VERSION_3_5:
- *
- * The array of physical camera metadata for the physical cameras being
- * requested upon. This array should have a 1-to-1 mapping with the
- * physcam_ids. The length of the array is num_physcam_metadata.
- */
- const camera_metadata_t **physcam_metadata;
-
-} camera3_capture_result_t;
-
-/**********************************************************************
- *
- * Callback methods for the HAL to call into the framework.
- *
- * These methods are used to return metadata and image buffers for a completed
- * or failed captures, and to notify the framework of asynchronous events such
- * as errors.
- *
- * The framework will not call back into the HAL from within these callbacks,
- * and these calls will not block for extended periods.
- *
- */
-typedef struct camera3_callback_ops {
-
- /**
- * process_capture_result:
- *
- * Send results from a completed capture to the framework.
- * process_capture_result() may be invoked multiple times by the HAL in
- * response to a single capture request. This allows, for example, the
- * metadata and low-resolution buffers to be returned in one call, and
- * post-processed JPEG buffers in a later call, once it is available. Each
- * call must include the frame number of the request it is returning
- * metadata or buffers for.
- *
- * A component (buffer or metadata) of the complete result may only be
- * included in one process_capture_result call. A buffer for each stream,
- * and the result metadata, must be returned by the HAL for each request in
- * one of the process_capture_result calls, even in case of errors producing
- * some of the output. A call to process_capture_result() with neither
- * output buffers or result metadata is not allowed.
- *
- * The order of returning metadata and buffers for a single result does not
- * matter, but buffers for a given stream must be returned in FIFO order. So
- * the buffer for request 5 for stream A must always be returned before the
- * buffer for request 6 for stream A. This also applies to the result
- * metadata; the metadata for request 5 must be returned before the metadata
- * for request 6.
- *
- * However, different streams are independent of each other, so it is
- * acceptable and expected that the buffer for request 5 for stream A may be
- * returned after the buffer for request 6 for stream B is. And it is
- * acceptable that the result metadata for request 6 for stream B is
- * returned before the buffer for request 5 for stream A is.
- *
- * The HAL retains ownership of result structure, which only needs to be
- * valid to access during this call. The framework will copy whatever it
- * needs before this call returns.
- *
- * The output buffers do not need to be filled yet; the framework will wait
- * on the stream buffer release sync fence before reading the buffer
- * data. Therefore, this method should be called by the HAL as soon as
- * possible, even if some or all of the output buffers are still in
- * being filled. The HAL must include valid release sync fences into each
- * output_buffers stream buffer entry, or -1 if that stream buffer is
- * already filled.
- *
- * If the result buffer cannot be constructed for a request, the HAL should
- * return an empty metadata buffer, but still provide the output buffers and
- * their sync fences. In addition, notify() must be called with an
- * ERROR_RESULT message.
- *
- * If an output buffer cannot be filled, its status field must be set to
- * STATUS_ERROR. In addition, notify() must be called with a ERROR_BUFFER
- * message.
- *
- * If the entire capture has failed, then this method still needs to be
- * called to return the output buffers to the framework. All the buffer
- * statuses should be STATUS_ERROR, and the result metadata should be an
- * empty buffer. In addition, notify() must be called with a ERROR_REQUEST
- * message. In this case, individual ERROR_RESULT/ERROR_BUFFER messages
- * should not be sent.
- *
- * Performance requirements:
- *
- * This is a non-blocking call. The framework will return this call in 5ms.
- *
- * The pipeline latency (see S7 for definition) should be less than or equal to
- * 4 frame intervals, and must be less than or equal to 8 frame intervals.
- *
- */
- void (*process_capture_result)(const struct camera3_callback_ops *,
- const camera3_capture_result_t *result);
-
- /**
- * notify:
- *
- * Asynchronous notification callback from the HAL, fired for various
- * reasons. Only for information independent of frame capture, or that
- * require specific timing. The ownership of the message structure remains
- * with the HAL, and the msg only needs to be valid for the duration of this
- * call.
- *
- * Multiple threads may call notify() simultaneously.
- *
- * <= CAMERA_DEVICE_API_VERSION_3_1:
- *
- * The notification for the start of exposure for a given request must be
- * sent by the HAL before the first call to process_capture_result() for
- * that request is made.
- *
- * >= CAMERA_DEVICE_API_VERSION_3_2:
- *
- * Buffers delivered to the framework will not be dispatched to the
- * application layer until a start of exposure timestamp (or input image's
- * start of exposure timestamp for a reprocess request) has been received
- * via a SHUTTER notify() call. It is highly recommended to dispatch this
- * call as early as possible.
- *
- * ------------------------------------------------------------------------
- * Performance requirements:
- *
- * This is a non-blocking call. The framework will return this call in 5ms.
- */
- void (*notify)(const struct camera3_callback_ops *,
- const camera3_notify_msg_t *msg);
-
- /**
- * request_stream_buffers:
- *
- * <= CAMERA_DEVICE_API_VERISON_3_5:
- *
- * DO NOT USE: not defined and must be NULL.
- *
- * >= CAMERA_DEVICE_API_VERISON_3_6:
- *
- * Synchronous callback for HAL to ask for output buffer from camera service.
- *
- * This call may be serialized in camera service so it is strongly
- * recommended to only call this method from one thread.
- *
- * When camera device advertises
- * (android.info.supportedBufferManagementVersion ==
- * ANDROID_INFO_SUPPORTED_BUFFER_MANAGEMENT_VERSION_HIDL_DEVICE_3_5), HAL
- * can use this method to request buffers from camera service.
- *
- * Caller is responsible for allocating enough memory for returned_buf_reqs
- * argument (num_buffer_reqs * sizeof(camera3_stream_buffer_ret_t)) bytes
- * and also the memory for the output_buffers field in each
- * camera3_stream_buffer_ret_t
- * (num_buffers_requested * sizeof(camera3_stream_buffer_t)) bytes
- *
- * Performance requirements:
- * This is a blocking call that takes more time with more buffers requested.
- * HAL should not request large amount of buffers on a latency critical code
- * path. It is highly recommended to use a dedicated thread to perform
- * all requestStreamBuffer calls, and adjust the thread priority and/or
- * timing of making the call in order for buffers to arrive before HAL is
- * ready to fill the buffer.
- */
- camera3_buffer_request_status_t (*request_stream_buffers)(
- const struct camera3_callback_ops *,
- uint32_t num_buffer_reqs,
- const camera3_buffer_request_t *buffer_reqs,
- /*out*/uint32_t *num_returned_buf_reqs,
- /*out*/camera3_stream_buffer_ret_t *returned_buf_reqs);
-
- /**
- * return_stream_buffers:
- *
- * <= CAMERA_DEVICE_API_VERISON_3_5:
- *
- * DO NOT USE: not defined and must be NULL.
- *
- * >= CAMERA_DEVICE_API_VERISON_3_6:
- *
- * Synchronous callback for HAL to return output buffers to camera service.
- *
- * If this method is called during a configure_streams() call, it will be
- * blocked until camera service finishes the ongoing configure_streams() call.
- */
- void (*return_stream_buffers)(
- const struct camera3_callback_ops *,
- uint32_t num_buffers,
- const camera3_stream_buffer_t* const* buffers);
-
-} camera3_callback_ops_t;
-
-/**********************************************************************
- *
- * Camera device operations
- *
- */
-typedef struct camera3_device_ops {
-
- /**
- * initialize:
- *
- * One-time initialization to pass framework callback function pointers to
- * the HAL. Will be called once after a successful open() call, before any
- * other functions are called on the camera3_device_ops structure.
- *
- * Performance requirements:
- *
- * This should be a non-blocking call. The HAL should return from this call
- * in 5ms, and must return from this call in 10ms.
- *
- * Return values:
- *
- * 0: On successful initialization
- *
- * -ENODEV: If initialization fails. Only close() can be called successfully
- * by the framework after this.
- */
- int (*initialize)(const struct camera3_device *,
- const camera3_callback_ops_t *callback_ops);
-
- /**********************************************************************
- * Stream management
- */
-
- /**
- * configure_streams:
- *
- * CAMERA_DEVICE_API_VERSION_3_0 only:
- *
- * Reset the HAL camera device processing pipeline and set up new input and
- * output streams. This call replaces any existing stream configuration with
- * the streams defined in the stream_list. This method will be called at
- * least once after initialize() before a request is submitted with
- * process_capture_request().
- *
- * The stream_list must contain at least one output-capable stream, and may
- * not contain more than one input-capable stream.
- *
- * The stream_list may contain streams that are also in the currently-active
- * set of streams (from the previous call to configure_stream()). These
- * streams will already have valid values for usage, max_buffers, and the
- * private pointer.
- *
- * If such a stream has already had its buffers registered,
- * register_stream_buffers() will not be called again for the stream, and
- * buffers from the stream can be immediately included in input requests.
- *
- * If the HAL needs to change the stream configuration for an existing
- * stream due to the new configuration, it may rewrite the values of usage
- * and/or max_buffers during the configure call.
- *
- * The framework will detect such a change, and will then reallocate the
- * stream buffers, and call register_stream_buffers() again before using
- * buffers from that stream in a request.
- *
- * If a currently-active stream is not included in stream_list, the HAL may
- * safely remove any references to that stream. It will not be reused in a
- * later configure() call by the framework, and all the gralloc buffers for
- * it will be freed after the configure_streams() call returns.
- *
- * The stream_list structure is owned by the framework, and may not be
- * accessed once this call completes. The address of an individual
- * camera3_stream_t structure will remain valid for access by the HAL until
- * the end of the first configure_stream() call which no longer includes
- * that camera3_stream_t in the stream_list argument. The HAL may not change
- * values in the stream structure outside of the private pointer, except for
- * the usage and max_buffers members during the configure_streams() call
- * itself.
- *
- * If the stream is new, the usage, max_buffer, and private pointer fields
- * of the stream structure will all be set to 0. The HAL device must set
- * these fields before the configure_streams() call returns. These fields
- * are then used by the framework and the platform gralloc module to
- * allocate the gralloc buffers for each stream.
- *
- * Before such a new stream can have its buffers included in a capture
- * request, the framework will call register_stream_buffers() with that
- * stream. However, the framework is not required to register buffers for
- * _all_ streams before submitting a request. This allows for quick startup
- * of (for example) a preview stream, with allocation for other streams
- * happening later or concurrently.
- *
- * ------------------------------------------------------------------------
- * CAMERA_DEVICE_API_VERSION_3_1 only:
- *
- * Reset the HAL camera device processing pipeline and set up new input and
- * output streams. This call replaces any existing stream configuration with
- * the streams defined in the stream_list. This method will be called at
- * least once after initialize() before a request is submitted with
- * process_capture_request().
- *
- * The stream_list must contain at least one output-capable stream, and may
- * not contain more than one input-capable stream.
- *
- * The stream_list may contain streams that are also in the currently-active
- * set of streams (from the previous call to configure_stream()). These
- * streams will already have valid values for usage, max_buffers, and the
- * private pointer.
- *
- * If such a stream has already had its buffers registered,
- * register_stream_buffers() will not be called again for the stream, and
- * buffers from the stream can be immediately included in input requests.
- *
- * If the HAL needs to change the stream configuration for an existing
- * stream due to the new configuration, it may rewrite the values of usage
- * and/or max_buffers during the configure call.
- *
- * The framework will detect such a change, and will then reallocate the
- * stream buffers, and call register_stream_buffers() again before using
- * buffers from that stream in a request.
- *
- * If a currently-active stream is not included in stream_list, the HAL may
- * safely remove any references to that stream. It will not be reused in a
- * later configure() call by the framework, and all the gralloc buffers for
- * it will be freed after the configure_streams() call returns.
- *
- * The stream_list structure is owned by the framework, and may not be
- * accessed once this call completes. The address of an individual
- * camera3_stream_t structure will remain valid for access by the HAL until
- * the end of the first configure_stream() call which no longer includes
- * that camera3_stream_t in the stream_list argument. The HAL may not change
- * values in the stream structure outside of the private pointer, except for
- * the usage and max_buffers members during the configure_streams() call
- * itself.
- *
- * If the stream is new, max_buffer, and private pointer fields of the
- * stream structure will all be set to 0. The usage will be set to the
- * consumer usage flags. The HAL device must set these fields before the
- * configure_streams() call returns. These fields are then used by the
- * framework and the platform gralloc module to allocate the gralloc
- * buffers for each stream.
- *
- * Before such a new stream can have its buffers included in a capture
- * request, the framework will call register_stream_buffers() with that
- * stream. However, the framework is not required to register buffers for
- * _all_ streams before submitting a request. This allows for quick startup
- * of (for example) a preview stream, with allocation for other streams
- * happening later or concurrently.
- *
- * ------------------------------------------------------------------------
- * >= CAMERA_DEVICE_API_VERSION_3_2:
- *
- * Reset the HAL camera device processing pipeline and set up new input and
- * output streams. This call replaces any existing stream configuration with
- * the streams defined in the stream_list. This method will be called at
- * least once after initialize() before a request is submitted with
- * process_capture_request().
- *
- * The stream_list must contain at least one output-capable stream, and may
- * not contain more than one input-capable stream.
- *
- * The stream_list may contain streams that are also in the currently-active
- * set of streams (from the previous call to configure_stream()). These
- * streams will already have valid values for usage, max_buffers, and the
- * private pointer.
- *
- * If the HAL needs to change the stream configuration for an existing
- * stream due to the new configuration, it may rewrite the values of usage
- * and/or max_buffers during the configure call.
- *
- * The framework will detect such a change, and may then reallocate the
- * stream buffers before using buffers from that stream in a request.
- *
- * If a currently-active stream is not included in stream_list, the HAL may
- * safely remove any references to that stream. It will not be reused in a
- * later configure() call by the framework, and all the gralloc buffers for
- * it will be freed after the configure_streams() call returns.
- *
- * The stream_list structure is owned by the framework, and may not be
- * accessed once this call completes. The address of an individual
- * camera3_stream_t structure will remain valid for access by the HAL until
- * the end of the first configure_stream() call which no longer includes
- * that camera3_stream_t in the stream_list argument. The HAL may not change
- * values in the stream structure outside of the private pointer, except for
- * the usage and max_buffers members during the configure_streams() call
- * itself.
- *
- * If the stream is new, max_buffer, and private pointer fields of the
- * stream structure will all be set to 0. The usage will be set to the
- * consumer usage flags. The HAL device must set these fields before the
- * configure_streams() call returns. These fields are then used by the
- * framework and the platform gralloc module to allocate the gralloc
- * buffers for each stream.
- *
- * Newly allocated buffers may be included in a capture request at any time
- * by the framework. Once a gralloc buffer is returned to the framework
- * with process_capture_result (and its respective release_fence has been
- * signaled) the framework may free or reuse it at any time.
- *
- * ------------------------------------------------------------------------
- *
- * Preconditions:
- *
- * The framework will only call this method when no captures are being
- * processed. That is, all results have been returned to the framework, and
- * all in-flight input and output buffers have been returned and their
- * release sync fences have been signaled by the HAL. The framework will not
- * submit new requests for capture while the configure_streams() call is
- * underway.
- *
- * Postconditions:
- *
- * The HAL device must configure itself to provide maximum possible output
- * frame rate given the sizes and formats of the output streams, as
- * documented in the camera device's static metadata.
- *
- * Performance requirements:
- *
- * This call is expected to be heavyweight and possibly take several hundred
- * milliseconds to complete, since it may require resetting and
- * reconfiguring the image sensor and the camera processing pipeline.
- * Nevertheless, the HAL device should attempt to minimize the
- * reconfiguration delay to minimize the user-visible pauses during
- * application operational mode changes (such as switching from still
- * capture to video recording).
- *
- * The HAL should return from this call in 500ms, and must return from this
- * call in 1000ms.
- *
- * Return values:
- *
- * 0: On successful stream configuration
- *
- * -EINVAL: If the requested stream configuration is invalid. Some examples
- * of invalid stream configurations include:
- *
- * - Including more than 1 input-capable stream (INPUT or
- * BIDIRECTIONAL)
- *
- * - Not including any output-capable streams (OUTPUT or
- * BIDIRECTIONAL)
- *
- * - Including streams with unsupported formats, or an unsupported
- * size for that format.
- *
- * - Including too many output streams of a certain format.
- *
- * - Unsupported rotation configuration (only applies to
- * devices with version >= CAMERA_DEVICE_API_VERSION_3_3)
- *
- * - Stream sizes/formats don't satisfy the
- * camera3_stream_configuration_t->operation_mode requirements for non-NORMAL mode,
- * or the requested operation_mode is not supported by the HAL.
- * (only applies to devices with version >= CAMERA_DEVICE_API_VERSION_3_3)
- *
- * Note that the framework submitting an invalid stream
- * configuration is not normal operation, since stream
- * configurations are checked before configure. An invalid
- * configuration means that a bug exists in the framework code, or
- * there is a mismatch between the HAL's static metadata and the
- * requirements on streams.
- *
- * -ENODEV: If there has been a fatal error and the device is no longer
- * operational. Only close() can be called successfully by the
- * framework after this error is returned.
- */
- int (*configure_streams)(const struct camera3_device *,
- camera3_stream_configuration_t *stream_list);
-
- /**
- * register_stream_buffers:
- *
- * >= CAMERA_DEVICE_API_VERSION_3_2:
- *
- * DEPRECATED. This will not be called and must be set to NULL.
- *
- * <= CAMERA_DEVICE_API_VERSION_3_1:
- *
- * Register buffers for a given stream with the HAL device. This method is
- * called by the framework after a new stream is defined by
- * configure_streams, and before buffers from that stream are included in a
- * capture request. If the same stream is listed in a subsequent
- * configure_streams() call, register_stream_buffers will _not_ be called
- * again for that stream.
- *
- * The framework does not need to register buffers for all configured
- * streams before it submits the first capture request. This allows quick
- * startup for preview (or similar use cases) while other streams are still
- * being allocated.
- *
- * This method is intended to allow the HAL device to map or otherwise
- * prepare the buffers for later use. The buffers passed in will already be
- * locked for use. At the end of the call, all the buffers must be ready to
- * be returned to the stream. The buffer_set argument is only valid for the
- * duration of this call.
- *
- * If the stream format was set to HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED,
- * the camera HAL should inspect the passed-in buffers here to determine any
- * platform-private pixel format information.
- *
- * Performance requirements:
- *
- * This should be a non-blocking call. The HAL should return from this call
- * in 1ms, and must return from this call in 5ms.
- *
- * Return values:
- *
- * 0: On successful registration of the new stream buffers
- *
- * -EINVAL: If the stream_buffer_set does not refer to a valid active
- * stream, or if the buffers array is invalid.
- *
- * -ENOMEM: If there was a failure in registering the buffers. The framework
- * must consider all the stream buffers to be unregistered, and can
- * try to register again later.
- *
- * -ENODEV: If there is a fatal error, and the device is no longer
- * operational. Only close() can be called successfully by the
- * framework after this error is returned.
- */
- int (*register_stream_buffers)(const struct camera3_device *,
- const camera3_stream_buffer_set_t *buffer_set);
-
- /**********************************************************************
- * Request creation and submission
- */
-
- /**
- * construct_default_request_settings:
- *
- * Create capture settings for standard camera use cases.
- *
- * The device must return a settings buffer that is configured to meet the
- * requested use case, which must be one of the CAMERA3_TEMPLATE_*
- * enums. All request control fields must be included.
- *
- * The HAL retains ownership of this structure, but the pointer to the
- * structure must be valid until the device is closed. The framework and the
- * HAL may not modify the buffer once it is returned by this call. The same
- * buffer may be returned for subsequent calls for the same template, or for
- * other templates.
- *
- * Performance requirements:
- *
- * This should be a non-blocking call. The HAL should return from this call
- * in 1ms, and must return from this call in 5ms.
- *
- * Return values:
- *
- * Valid metadata: On successful creation of a default settings
- * buffer.
- *
- * NULL: In case of a fatal error. After this is returned, only
- * the close() method can be called successfully by the
- * framework.
- */
- const camera_metadata_t* (*construct_default_request_settings)(
- const struct camera3_device *,
- int type);
-
- /**
- * process_capture_request:
- *
- * Send a new capture request to the HAL. The HAL should not return from
- * this call until it is ready to accept the next request to process. Only
- * one call to process_capture_request() will be made at a time by the
- * framework, and the calls will all be from the same thread. The next call
- * to process_capture_request() will be made as soon as a new request and
- * its associated buffers are available. In a normal preview scenario, this
- * means the function will be called again by the framework almost
- * instantly.
- *
- * The actual request processing is asynchronous, with the results of
- * capture being returned by the HAL through the process_capture_result()
- * call. This call requires the result metadata to be available, but output
- * buffers may simply provide sync fences to wait on. Multiple requests are
- * expected to be in flight at once, to maintain full output frame rate.
- *
- * The framework retains ownership of the request structure. It is only
- * guaranteed to be valid during this call. The HAL device must make copies
- * of the information it needs to retain for the capture processing. The HAL
- * is responsible for waiting on and closing the buffers' fences and
- * returning the buffer handles to the framework.
- *
- * The HAL must write the file descriptor for the input buffer's release
- * sync fence into input_buffer->release_fence, if input_buffer is not
- * NULL. If the HAL returns -1 for the input buffer release sync fence, the
- * framework is free to immediately reuse the input buffer. Otherwise, the
- * framework will wait on the sync fence before refilling and reusing the
- * input buffer.
- *
- * >= CAMERA_DEVICE_API_VERSION_3_2:
- *
- * The input/output buffers provided by the framework in each request
- * may be brand new (having never before seen by the HAL).
- *
- * ------------------------------------------------------------------------
- * Performance considerations:
- *
- * Handling a new buffer should be extremely lightweight and there should be
- * no frame rate degradation or frame jitter introduced.
- *
- * This call must return fast enough to ensure that the requested frame
- * rate can be sustained, especially for streaming cases (post-processing
- * quality settings set to FAST). The HAL should return this call in 1
- * frame interval, and must return from this call in 4 frame intervals.
- *
- * Return values:
- *
- * 0: On a successful start to processing the capture request
- *
- * -EINVAL: If the input is malformed (the settings are NULL when not
- * allowed, invalid physical camera settings,
- * there are 0 output buffers, etc) and capture processing
- * cannot start. Failures during request processing should be
- * handled by calling camera3_callback_ops_t.notify(). In case of
- * this error, the framework will retain responsibility for the
- * stream buffers' fences and the buffer handles; the HAL should
- * not close the fences or return these buffers with
- * process_capture_result.
- *
- * -ENODEV: If the camera device has encountered a serious error. After this
- * error is returned, only the close() method can be successfully
- * called by the framework.
- *
- */
- int (*process_capture_request)(const struct camera3_device *,
- camera3_capture_request_t *request);
-
- /**********************************************************************
- * Miscellaneous methods
- */
-
- /**
- * get_metadata_vendor_tag_ops:
- *
- * Get methods to query for vendor extension metadata tag information. The
- * HAL should fill in all the vendor tag operation methods, or leave ops
- * unchanged if no vendor tags are defined.
- *
- * The definition of vendor_tag_query_ops_t can be found in
- * system/media/camera/include/system/camera_metadata.h.
- *
- * >= CAMERA_DEVICE_API_VERSION_3_2:
- * DEPRECATED. This function has been deprecated and should be set to
- * NULL by the HAL. Please implement get_vendor_tag_ops in camera_common.h
- * instead.
- */
- void (*get_metadata_vendor_tag_ops)(const struct camera3_device*,
- vendor_tag_query_ops_t* ops);
-
- /**
- * dump:
- *
- * Print out debugging state for the camera device. This will be called by
- * the framework when the camera service is asked for a debug dump, which
- * happens when using the dumpsys tool, or when capturing a bugreport.
- *
- * The passed-in file descriptor can be used to write debugging text using
- * dprintf() or write(). The text should be in ASCII encoding only.
- *
- * Performance requirements:
- *
- * This must be a non-blocking call. The HAL should return from this call
- * in 1ms, must return from this call in 10ms. This call must avoid
- * deadlocks, as it may be called at any point during camera operation.
- * Any synchronization primitives used (such as mutex locks or semaphores)
- * should be acquired with a timeout.
- */
- void (*dump)(const struct camera3_device *, int fd);
-
- /**
- * flush:
- *
- * Flush all currently in-process captures and all buffers in the pipeline
- * on the given device. The framework will use this to dump all state as
- * quickly as possible in order to prepare for a configure_streams() call.
- *
- * No buffers are required to be successfully returned, so every buffer
- * held at the time of flush() (whether successfully filled or not) may be
- * returned with CAMERA3_BUFFER_STATUS_ERROR. Note the HAL is still allowed
- * to return valid (CAMERA3_BUFFER_STATUS_OK) buffers during this call,
- * provided they are successfully filled.
- *
- * All requests currently in the HAL are expected to be returned as soon as
- * possible. Not-in-process requests should return errors immediately. Any
- * interruptible hardware blocks should be stopped, and any uninterruptible
- * blocks should be waited on.
- *
- * flush() may be called concurrently to process_capture_request(), with the expectation that
- * process_capture_request will return quickly and the request submitted in that
- * process_capture_request call is treated like all other in-flight requests. Due to
- * concurrency issues, it is possible that from the HAL's point of view, a
- * process_capture_request() call may be started after flush has been invoked but has not
- * returned yet. If such a call happens before flush() returns, the HAL should treat the new
- * capture request like other in-flight pending requests (see #4 below).
- *
- * More specifically, the HAL must follow below requirements for various cases:
- *
- * 1. For captures that are too late for the HAL to cancel/stop, and will be
- * completed normally by the HAL; i.e. the HAL can send shutter/notify and
- * process_capture_result and buffers as normal.
- *
- * 2. For pending requests that have not done any processing, the HAL must call notify
- * CAMERA3_MSG_ERROR_REQUEST, and return all the output buffers with
- * process_capture_result in the error state (CAMERA3_BUFFER_STATUS_ERROR).
- * The HAL must not place the release fence into an error state, instead,
- * the release fences must be set to the acquire fences passed by the framework,
- * or -1 if they have been waited on by the HAL already. This is also the path
- * to follow for any captures for which the HAL already called notify() with
- * CAMERA3_MSG_SHUTTER but won't be producing any metadata/valid buffers for.
- * After CAMERA3_MSG_ERROR_REQUEST, for a given frame, only process_capture_results with
- * buffers in CAMERA3_BUFFER_STATUS_ERROR are allowed. No further notifys or
- * process_capture_result with non-null metadata is allowed.
- *
- * 3. For partially completed pending requests that will not have all the output
- * buffers or perhaps missing metadata, the HAL should follow below:
- *
- * 3.1. Call notify with CAMERA3_MSG_ERROR_RESULT if some of the expected result
- * metadata (i.e. one or more partial metadata) won't be available for the capture.
- *
- * 3.2. Call notify with CAMERA3_MSG_ERROR_BUFFER for every buffer that won't
- * be produced for the capture.
- *
- * 3.3 Call notify with CAMERA3_MSG_SHUTTER with the capture timestamp before
- * any buffers/metadata are returned with process_capture_result.
- *
- * 3.4 For captures that will produce some results, the HAL must not call
- * CAMERA3_MSG_ERROR_REQUEST, since that indicates complete failure.
- *
- * 3.5. Valid buffers/metadata should be passed to the framework as normal.
- *
- * 3.6. Failed buffers should be returned to the framework as described for case 2.
- * But failed buffers do not have to follow the strict ordering valid buffers do,
- * and may be out-of-order with respect to valid buffers. For example, if buffers
- * A, B, C, D, E are sent, D and E are failed, then A, E, B, D, C is an acceptable
- * return order.
- *
- * 3.7. For fully-missing metadata, calling CAMERA3_MSG_ERROR_RESULT is sufficient, no
- * need to call process_capture_result with NULL metadata or equivalent.
- *
- * 4. If a flush() is invoked while a process_capture_request() invocation is active, that
- * process call should return as soon as possible. In addition, if a process_capture_request()
- * call is made after flush() has been invoked but before flush() has returned, the
- * capture request provided by the late process_capture_request call should be treated like
- * a pending request in case #2 above.
- *
- * flush() should only return when there are no more outstanding buffers or
- * requests left in the HAL. The framework may call configure_streams (as
- * the HAL state is now quiesced) or may issue new requests.
- *
- * Note that it's sufficient to only support fully-succeeded and fully-failed result cases.
- * However, it is highly desirable to support the partial failure cases as well, as it
- * could help improve the flush call overall performance.
- *
- * Performance requirements:
- *
- * The HAL should return from this call in 100ms, and must return from this
- * call in 1000ms. And this call must not be blocked longer than pipeline
- * latency (see S7 for definition).
- *
- * Version information:
- *
- * only available if device version >= CAMERA_DEVICE_API_VERSION_3_1.
- *
- * Return values:
- *
- * 0: On a successful flush of the camera HAL.
- *
- * -EINVAL: If the input is malformed (the device is not valid).
- *
- * -ENODEV: If the camera device has encountered a serious error. After this
- * error is returned, only the close() method can be successfully
- * called by the framework.
- */
- int (*flush)(const struct camera3_device *);
-
- /**
- * signal_stream_flush:
- *
- * <= CAMERA_DEVICE_API_VERISON_3_5:
- *
- * Not defined and must be NULL
- *
- * >= CAMERA_DEVICE_API_VERISON_3_6:
- *
- * Signaling HAL camera service is about to perform configure_streams() call
- * and HAL must return all buffers of designated streams. HAL must finish
- * inflight requests normally and return all buffers belonging to the
- * designated streams through process_capture_result() or
- * return_stream_buffers() API in a timely manner, or camera service will run
- * into a fatal error.
- *
- * Note that this call serves as an optional hint and camera service may
- * skip calling this if all buffers are already returned.
- *
- */
- void (*signal_stream_flush)(const struct camera3_device*,
- uint32_t num_streams,
- const camera3_stream_t* const* streams);
-
- /**
- * is_reconfiguration_required:
- *
- * <= CAMERA_DEVICE_API_VERISON_3_5:
- *
- * Not defined and must be NULL
- *
- * >= CAMERA_DEVICE_API_VERISON_3_6:
- *
- * Check whether complete stream reconfiguration is required for possible new session
- * parameter values.
- *
- * This method must be called by the camera framework in case the client changes
- * the value of any advertised session parameters. Depending on the specific values
- * the HAL can decide whether a complete stream reconfiguration is required. In case
- * the HAL returns -ENVAL, the camera framework must skip the internal reconfiguration.
- * In case Hal returns 0, the framework must reconfigure the streams and pass the
- * new session parameter values accordingly.
- * This call may be done by the framework some time before the request with new parameters
- * is submitted to the HAL, and the request may be cancelled before it ever gets submitted.
- * Therefore, the HAL must not use this query as an indication to change its behavior in any
- * way.
- * ------------------------------------------------------------------------
- *
- * Preconditions:
- *
- * The framework can call this method at any time after active
- * session configuration. There must be no impact on the performance of
- * pending camera requests in any way. In particular there must not be
- * any glitches or delays during normal camera streaming.
- *
- * Performance requirements:
- * HW and SW camera settings must not be changed and there must not be
- * a user-visible impact on camera performance.
- *
- * @param oldSessionParams The currently applied session parameters.
- * @param newSessionParams The new session parameters set by client.
- *
- * @return Status Status code for the operation, one of:
- * 0: In case the stream reconfiguration is required
- *
- * -EINVAL: In case the stream reconfiguration is not required.
- *
- * -ENOSYS: In case the camera device does not support the
- * reconfiguration query.
- */
- int (*is_reconfiguration_required)(const struct camera3_device*,
- const camera_metadata_t* old_session_params,
- const camera_metadata_t* new_session_params);
-
- /* reserved for future use */
- void *reserved[6];
-} camera3_device_ops_t;
-
-/**********************************************************************
- *
- * Camera device definition
- *
- */
-typedef struct camera3_device {
- /**
- * common.version must equal CAMERA_DEVICE_API_VERSION_3_0 to identify this
- * device as implementing version 3.0 of the camera device HAL.
- *
- * Performance requirements:
- *
- * Camera open (common.module->common.methods->open) should return in 200ms, and must return
- * in 500ms.
- * Camera close (common.close) should return in 200ms, and must return in 500ms.
- *
- */
- hw_device_t common;
- camera3_device_ops_t *ops;
- void *priv;
-} camera3_device_t;
-
-__END_DECLS
-
-#endif /* #ifdef ANDROID_INCLUDE_CAMERA3_H */
diff --git a/manifest.xml b/manifest.xml
index 860f298..951263d 100644
--- a/manifest.xml
+++ b/manifest.xml
@@ -27,15 +27,6 @@
</interface>
</hal>
<hal format="hidl">
- <name>android.hardware.camera.provider</name>
- <transport>hwbinder</transport>
- <version>2.5</version>
- <interface>
- <name>ICameraProvider</name>
- <instance>legacy/0</instance>
- </interface>
- </hal>
- <hal format="hidl">
<name>android.hardware.gatekeeper</name>
<transport>hwbinder</transport>
<version>1.0</version>